linux/drivers/net/hamradio/yam.c
<<
>>
Prefs
   1/*****************************************************************************/
   2
   3/*
   4 *    yam.c  -- YAM radio modem driver.
   5 *
   6 *      Copyright (C) 1998 Frederic Rible F1OAT (frible@teaser.fr)
   7 *      Adapted from baycom.c driver written by Thomas Sailer (sailer@ife.ee.ethz.ch)
   8 *
   9 *      This program is free software; you can redistribute it and/or modify
  10 *      it under the terms of the GNU General Public License as published by
  11 *      the Free Software Foundation; either version 2 of the License, or
  12 *      (at your option) any later version.
  13 *
  14 *      This program is distributed in the hope that it will be useful,
  15 *      but WITHOUT ANY WARRANTY; without even the implied warranty of
  16 *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17 *      GNU General Public License for more details.
  18 *
  19 *      You should have received a copy of the GNU General Public License
  20 *      along with this program; if not, write to the Free Software
  21 *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  22 *
  23 *  Please note that the GPL allows you to use the driver, NOT the radio.
  24 *  In order to use the radio, you need a license from the communications
  25 *  authority of your country.
  26 *
  27 *
  28 *  History:
  29 *   0.0 F1OAT 06.06.98  Begin of work with baycom.c source code V 0.3
  30 *   0.1 F1OAT 07.06.98  Add timer polling routine for channel arbitration
  31 *   0.2 F6FBB 08.06.98  Added delay after FPGA programming
  32 *   0.3 F6FBB 29.07.98  Delayed PTT implementation for dupmode=2
  33 *   0.4 F6FBB 30.07.98  Added TxTail, Slottime and Persistence
  34 *   0.5 F6FBB 01.08.98  Shared IRQs, /proc/net and network statistics
  35 *   0.6 F6FBB 25.08.98  Added 1200Bds format
  36 *   0.7 F6FBB 12.09.98  Added to the kernel configuration
  37 *   0.8 F6FBB 14.10.98  Fixed slottime/persistence timing bug
  38 *       OK1ZIA 2.09.01  Fixed "kfree_skb on hard IRQ" 
  39 *                       using dev_kfree_skb_any(). (important in 2.4 kernel)
  40 *   
  41 */
  42
  43/*****************************************************************************/
  44
  45#include <linux/module.h>
  46#include <linux/types.h>
  47#include <linux/net.h>
  48#include <linux/in.h>
  49#include <linux/if.h>
  50#include <linux/slab.h>
  51#include <linux/errno.h>
  52#include <linux/bitops.h>
  53#include <linux/random.h>
  54#include <asm/io.h>
  55#include <linux/interrupt.h>
  56#include <linux/ioport.h>
  57#include <linux/firmware.h>
  58#include <linux/platform_device.h>
  59
  60#include <linux/netdevice.h>
  61#include <linux/if_arp.h>
  62#include <linux/etherdevice.h>
  63#include <linux/skbuff.h>
  64#include <net/ax25.h>
  65
  66#include <linux/kernel.h>
  67#include <linux/proc_fs.h>
  68#include <linux/seq_file.h>
  69#include <net/net_namespace.h>
  70
  71#include <linux/uaccess.h>
  72#include <linux/init.h>
  73
  74#include <linux/yam.h>
  75
  76/* --------------------------------------------------------------------- */
  77
  78static const char yam_drvname[] = "yam";
  79static const char yam_drvinfo[] __initconst = KERN_INFO \
  80        "YAM driver version 0.8 by F1OAT/F6FBB\n";
  81
  82/* --------------------------------------------------------------------- */
  83
  84#define FIRMWARE_9600   "yam/9600.bin"
  85#define FIRMWARE_1200   "yam/1200.bin"
  86
  87#define YAM_9600        1
  88#define YAM_1200        2
  89
  90#define NR_PORTS        4
  91#define YAM_MAGIC       0xF10A7654
  92
  93/* Transmitter states */
  94
  95#define TX_OFF          0
  96#define TX_HEAD         1
  97#define TX_DATA         2
  98#define TX_CRC1         3
  99#define TX_CRC2         4
 100#define TX_TAIL         5
 101
 102#define YAM_MAX_FRAME   1024
 103
 104#define DEFAULT_BITRATE 9600                    /* bps */
 105#define DEFAULT_HOLDD   10                      /* sec */
 106#define DEFAULT_TXD     300                     /* ms */
 107#define DEFAULT_TXTAIL  10                      /* ms */
 108#define DEFAULT_SLOT    100                     /* ms */
 109#define DEFAULT_PERS    64                      /* 0->255 */
 110
 111struct yam_port {
 112        int magic;
 113        int bitrate;
 114        int baudrate;
 115        int iobase;
 116        int irq;
 117        int dupmode;
 118
 119        struct net_device *dev;
 120
 121        int nb_rxint;
 122        int nb_mdint;
 123
 124        /* Parameters section */
 125
 126        int txd;                                /* tx delay */
 127        int holdd;                              /* duplex ptt delay */
 128        int txtail;                             /* txtail delay */
 129        int slot;                               /* slottime */
 130        int pers;                               /* persistence */
 131
 132        /* Tx section */
 133
 134        int tx_state;
 135        int tx_count;
 136        int slotcnt;
 137        unsigned char tx_buf[YAM_MAX_FRAME];
 138        int tx_len;
 139        int tx_crcl, tx_crch;
 140        struct sk_buff_head send_queue;         /* Packets awaiting transmission */
 141
 142        /* Rx section */
 143
 144        int dcd;
 145        unsigned char rx_buf[YAM_MAX_FRAME];
 146        int rx_len;
 147        int rx_crcl, rx_crch;
 148};
 149
 150struct yam_mcs {
 151        unsigned char bits[YAM_FPGA_SIZE];
 152        int bitrate;
 153        struct yam_mcs *next;
 154};
 155
 156static struct net_device *yam_devs[NR_PORTS];
 157
 158static struct yam_mcs *yam_data;
 159
 160static DEFINE_TIMER(yam_timer, NULL);
 161
 162/* --------------------------------------------------------------------- */
 163
 164#define RBR(iobase)     (iobase+0)
 165#define THR(iobase)     (iobase+0)
 166#define IER(iobase)     (iobase+1)
 167#define IIR(iobase)     (iobase+2)
 168#define FCR(iobase)     (iobase+2)
 169#define LCR(iobase)     (iobase+3)
 170#define MCR(iobase)     (iobase+4)
 171#define LSR(iobase)     (iobase+5)
 172#define MSR(iobase)     (iobase+6)
 173#define SCR(iobase)     (iobase+7)
 174#define DLL(iobase)     (iobase+0)
 175#define DLM(iobase)     (iobase+1)
 176
 177#define YAM_EXTENT      8
 178
 179/* Interrupt Identification Register Bit Masks */
 180#define IIR_NOPEND      1
 181#define IIR_MSR         0
 182#define IIR_TX          2
 183#define IIR_RX          4
 184#define IIR_LSR         6
 185#define IIR_TIMEOUT     12                      /* Fifo mode only */
 186
 187#define IIR_MASK        0x0F
 188
 189/* Interrupt Enable Register Bit Masks */
 190#define IER_RX          1                       /* enable rx interrupt */
 191#define IER_TX          2                       /* enable tx interrupt */
 192#define IER_LSR         4                       /* enable line status interrupts */
 193#define IER_MSR         8                       /* enable modem status interrupts */
 194
 195/* Modem Control Register Bit Masks */
 196#define MCR_DTR         0x01                    /* DTR output */
 197#define MCR_RTS         0x02                    /* RTS output */
 198#define MCR_OUT1        0x04                    /* OUT1 output (not accessible in RS232) */
 199#define MCR_OUT2        0x08                    /* Master Interrupt enable (must be set on PCs) */
 200#define MCR_LOOP        0x10                    /* Loopback enable */
 201
 202/* Modem Status Register Bit Masks */
 203#define MSR_DCTS        0x01                    /* Delta CTS input */
 204#define MSR_DDSR        0x02                    /* Delta DSR */
 205#define MSR_DRIN        0x04                    /* Delta RI */
 206#define MSR_DDCD        0x08                    /* Delta DCD */
 207#define MSR_CTS         0x10                    /* CTS input */
 208#define MSR_DSR         0x20                    /* DSR input */
 209#define MSR_RING        0x40                    /* RI  input */
 210#define MSR_DCD         0x80                    /* DCD input */
 211
 212/* line status register bit mask */
 213#define LSR_RXC         0x01
 214#define LSR_OE          0x02
 215#define LSR_PE          0x04
 216#define LSR_FE          0x08
 217#define LSR_BREAK       0x10
 218#define LSR_THRE        0x20
 219#define LSR_TSRE        0x40
 220
 221/* Line Control Register Bit Masks */
 222#define LCR_DLAB        0x80
 223#define LCR_BREAK       0x40
 224#define LCR_PZERO       0x28
 225#define LCR_PEVEN       0x18
 226#define LCR_PODD        0x08
 227#define LCR_STOP1       0x00
 228#define LCR_STOP2       0x04
 229#define LCR_BIT5        0x00
 230#define LCR_BIT6        0x02
 231#define LCR_BIT7        0x01
 232#define LCR_BIT8        0x03
 233
 234/* YAM Modem <-> UART Port mapping */
 235
 236#define TX_RDY          MSR_DCTS                /* transmitter ready to send */
 237#define RX_DCD          MSR_DCD                 /* carrier detect */
 238#define RX_FLAG         MSR_RING                /* hdlc flag received */
 239#define FPGA_DONE       MSR_DSR                 /* FPGA is configured */
 240#define PTT_ON          (MCR_RTS|MCR_OUT2)      /* activate PTT */
 241#define PTT_OFF         (MCR_DTR|MCR_OUT2)      /* release PTT */
 242
 243#define ENABLE_RXINT    IER_RX                  /* enable uart rx interrupt during rx */
 244#define ENABLE_TXINT    IER_MSR                 /* enable uart ms interrupt during tx */
 245#define ENABLE_RTXINT   (IER_RX|IER_MSR)        /* full duplex operations */
 246
 247
 248/*************************************************************************
 249* CRC Tables
 250************************************************************************/
 251
 252static const unsigned char chktabl[256] =
 253{0x00, 0x89, 0x12, 0x9b, 0x24, 0xad, 0x36, 0xbf, 0x48, 0xc1, 0x5a, 0xd3, 0x6c, 0xe5, 0x7e,
 254 0xf7, 0x81, 0x08, 0x93, 0x1a, 0xa5, 0x2c, 0xb7, 0x3e, 0xc9, 0x40, 0xdb, 0x52, 0xed, 0x64,
 255 0xff, 0x76, 0x02, 0x8b, 0x10, 0x99, 0x26, 0xaf, 0x34, 0xbd, 0x4a, 0xc3, 0x58, 0xd1, 0x6e,
 256 0xe7, 0x7c, 0xf5, 0x83, 0x0a, 0x91, 0x18, 0xa7, 0x2e, 0xb5, 0x3c, 0xcb, 0x42, 0xd9, 0x50,
 257 0xef, 0x66, 0xfd, 0x74, 0x04, 0x8d, 0x16, 0x9f, 0x20, 0xa9, 0x32, 0xbb, 0x4c, 0xc5, 0x5e,
 258 0xd7, 0x68, 0xe1, 0x7a, 0xf3, 0x85, 0x0c, 0x97, 0x1e, 0xa1, 0x28, 0xb3, 0x3a, 0xcd, 0x44,
 259 0xdf, 0x56, 0xe9, 0x60, 0xfb, 0x72, 0x06, 0x8f, 0x14, 0x9d, 0x22, 0xab, 0x30, 0xb9, 0x4e,
 260 0xc7, 0x5c, 0xd5, 0x6a, 0xe3, 0x78, 0xf1, 0x87, 0x0e, 0x95, 0x1c, 0xa3, 0x2a, 0xb1, 0x38,
 261 0xcf, 0x46, 0xdd, 0x54, 0xeb, 0x62, 0xf9, 0x70, 0x08, 0x81, 0x1a, 0x93, 0x2c, 0xa5, 0x3e,
 262 0xb7, 0x40, 0xc9, 0x52, 0xdb, 0x64, 0xed, 0x76, 0xff, 0x89, 0x00, 0x9b, 0x12, 0xad, 0x24,
 263 0xbf, 0x36, 0xc1, 0x48, 0xd3, 0x5a, 0xe5, 0x6c, 0xf7, 0x7e, 0x0a, 0x83, 0x18, 0x91, 0x2e,
 264 0xa7, 0x3c, 0xb5, 0x42, 0xcb, 0x50, 0xd9, 0x66, 0xef, 0x74, 0xfd, 0x8b, 0x02, 0x99, 0x10,
 265 0xaf, 0x26, 0xbd, 0x34, 0xc3, 0x4a, 0xd1, 0x58, 0xe7, 0x6e, 0xf5, 0x7c, 0x0c, 0x85, 0x1e,
 266 0x97, 0x28, 0xa1, 0x3a, 0xb3, 0x44, 0xcd, 0x56, 0xdf, 0x60, 0xe9, 0x72, 0xfb, 0x8d, 0x04,
 267 0x9f, 0x16, 0xa9, 0x20, 0xbb, 0x32, 0xc5, 0x4c, 0xd7, 0x5e, 0xe1, 0x68, 0xf3, 0x7a, 0x0e,
 268 0x87, 0x1c, 0x95, 0x2a, 0xa3, 0x38, 0xb1, 0x46, 0xcf, 0x54, 0xdd, 0x62, 0xeb, 0x70, 0xf9,
 269 0x8f, 0x06, 0x9d, 0x14, 0xab, 0x22, 0xb9, 0x30, 0xc7, 0x4e, 0xd5, 0x5c, 0xe3, 0x6a, 0xf1,
 270 0x78};
 271static const unsigned char chktabh[256] =
 272{0x00, 0x11, 0x23, 0x32, 0x46, 0x57, 0x65, 0x74, 0x8c, 0x9d, 0xaf, 0xbe, 0xca, 0xdb, 0xe9,
 273 0xf8, 0x10, 0x01, 0x33, 0x22, 0x56, 0x47, 0x75, 0x64, 0x9c, 0x8d, 0xbf, 0xae, 0xda, 0xcb,
 274 0xf9, 0xe8, 0x21, 0x30, 0x02, 0x13, 0x67, 0x76, 0x44, 0x55, 0xad, 0xbc, 0x8e, 0x9f, 0xeb,
 275 0xfa, 0xc8, 0xd9, 0x31, 0x20, 0x12, 0x03, 0x77, 0x66, 0x54, 0x45, 0xbd, 0xac, 0x9e, 0x8f,
 276 0xfb, 0xea, 0xd8, 0xc9, 0x42, 0x53, 0x61, 0x70, 0x04, 0x15, 0x27, 0x36, 0xce, 0xdf, 0xed,
 277 0xfc, 0x88, 0x99, 0xab, 0xba, 0x52, 0x43, 0x71, 0x60, 0x14, 0x05, 0x37, 0x26, 0xde, 0xcf,
 278 0xfd, 0xec, 0x98, 0x89, 0xbb, 0xaa, 0x63, 0x72, 0x40, 0x51, 0x25, 0x34, 0x06, 0x17, 0xef,
 279 0xfe, 0xcc, 0xdd, 0xa9, 0xb8, 0x8a, 0x9b, 0x73, 0x62, 0x50, 0x41, 0x35, 0x24, 0x16, 0x07,
 280 0xff, 0xee, 0xdc, 0xcd, 0xb9, 0xa8, 0x9a, 0x8b, 0x84, 0x95, 0xa7, 0xb6, 0xc2, 0xd3, 0xe1,
 281 0xf0, 0x08, 0x19, 0x2b, 0x3a, 0x4e, 0x5f, 0x6d, 0x7c, 0x94, 0x85, 0xb7, 0xa6, 0xd2, 0xc3,
 282 0xf1, 0xe0, 0x18, 0x09, 0x3b, 0x2a, 0x5e, 0x4f, 0x7d, 0x6c, 0xa5, 0xb4, 0x86, 0x97, 0xe3,
 283 0xf2, 0xc0, 0xd1, 0x29, 0x38, 0x0a, 0x1b, 0x6f, 0x7e, 0x4c, 0x5d, 0xb5, 0xa4, 0x96, 0x87,
 284 0xf3, 0xe2, 0xd0, 0xc1, 0x39, 0x28, 0x1a, 0x0b, 0x7f, 0x6e, 0x5c, 0x4d, 0xc6, 0xd7, 0xe5,
 285 0xf4, 0x80, 0x91, 0xa3, 0xb2, 0x4a, 0x5b, 0x69, 0x78, 0x0c, 0x1d, 0x2f, 0x3e, 0xd6, 0xc7,
 286 0xf5, 0xe4, 0x90, 0x81, 0xb3, 0xa2, 0x5a, 0x4b, 0x79, 0x68, 0x1c, 0x0d, 0x3f, 0x2e, 0xe7,
 287 0xf6, 0xc4, 0xd5, 0xa1, 0xb0, 0x82, 0x93, 0x6b, 0x7a, 0x48, 0x59, 0x2d, 0x3c, 0x0e, 0x1f,
 288 0xf7, 0xe6, 0xd4, 0xc5, 0xb1, 0xa0, 0x92, 0x83, 0x7b, 0x6a, 0x58, 0x49, 0x3d, 0x2c, 0x1e,
 289 0x0f};
 290
 291/*************************************************************************
 292* FPGA functions
 293************************************************************************/
 294
 295static void delay(int ms)
 296{
 297        unsigned long timeout = jiffies + ((ms * HZ) / 1000);
 298        while (time_before(jiffies, timeout))
 299                cpu_relax();
 300}
 301
 302/*
 303 * reset FPGA
 304 */
 305
 306static void fpga_reset(int iobase)
 307{
 308        outb(0, IER(iobase));
 309        outb(LCR_DLAB | LCR_BIT5, LCR(iobase));
 310        outb(1, DLL(iobase));
 311        outb(0, DLM(iobase));
 312
 313        outb(LCR_BIT5, LCR(iobase));
 314        inb(LSR(iobase));
 315        inb(MSR(iobase));
 316        /* turn off FPGA supply voltage */
 317        outb(MCR_OUT1 | MCR_OUT2, MCR(iobase));
 318        delay(100);
 319        /* turn on FPGA supply voltage again */
 320        outb(MCR_DTR | MCR_RTS | MCR_OUT1 | MCR_OUT2, MCR(iobase));
 321        delay(100);
 322}
 323
 324/*
 325 * send one byte to FPGA
 326 */
 327
 328static int fpga_write(int iobase, unsigned char wrd)
 329{
 330        unsigned char bit;
 331        int k;
 332        unsigned long timeout = jiffies + HZ / 10;
 333
 334        for (k = 0; k < 8; k++) {
 335                bit = (wrd & 0x80) ? (MCR_RTS | MCR_DTR) : MCR_DTR;
 336                outb(bit | MCR_OUT1 | MCR_OUT2, MCR(iobase));
 337                wrd <<= 1;
 338                outb(0xfc, THR(iobase));
 339                while ((inb(LSR(iobase)) & LSR_TSRE) == 0)
 340                        if (time_after(jiffies, timeout))
 341                                return -1;
 342        }
 343
 344        return 0;
 345}
 346
 347/*
 348 * predef should be 0 for loading user defined mcs
 349 * predef should be YAM_1200 for loading predef 1200 mcs
 350 * predef should be YAM_9600 for loading predef 9600 mcs
 351 */
 352static unsigned char *add_mcs(unsigned char *bits, int bitrate,
 353                              unsigned int predef)
 354{
 355        const char *fw_name[2] = {FIRMWARE_9600, FIRMWARE_1200};
 356        const struct firmware *fw;
 357        struct platform_device *pdev;
 358        struct yam_mcs *p;
 359        int err;
 360
 361        switch (predef) {
 362        case 0:
 363                fw = NULL;
 364                break;
 365        case YAM_1200:
 366        case YAM_9600:
 367                predef--;
 368                pdev = platform_device_register_simple("yam", 0, NULL, 0);
 369                if (IS_ERR(pdev)) {
 370                        printk(KERN_ERR "yam: Failed to register firmware\n");
 371                        return NULL;
 372                }
 373                err = request_firmware(&fw, fw_name[predef], &pdev->dev);
 374                platform_device_unregister(pdev);
 375                if (err) {
 376                        printk(KERN_ERR "Failed to load firmware \"%s\"\n",
 377                               fw_name[predef]);
 378                        return NULL;
 379                }
 380                if (fw->size != YAM_FPGA_SIZE) {
 381                        printk(KERN_ERR "Bogus length %zu in firmware \"%s\"\n",
 382                               fw->size, fw_name[predef]);
 383                        release_firmware(fw);
 384                        return NULL;
 385                }
 386                bits = (unsigned char *)fw->data;
 387                break;
 388        default:
 389                printk(KERN_ERR "yam: Invalid predef number %u\n", predef);
 390                return NULL;
 391        }
 392
 393        /* If it already exists, replace the bit data */
 394        p = yam_data;
 395        while (p) {
 396                if (p->bitrate == bitrate) {
 397                        memcpy(p->bits, bits, YAM_FPGA_SIZE);
 398                        goto out;
 399                }
 400                p = p->next;
 401        }
 402
 403        /* Allocate a new mcs */
 404        if ((p = kmalloc(sizeof(struct yam_mcs), GFP_KERNEL)) == NULL) {
 405                release_firmware(fw);
 406                return NULL;
 407        }
 408        memcpy(p->bits, bits, YAM_FPGA_SIZE);
 409        p->bitrate = bitrate;
 410        p->next = yam_data;
 411        yam_data = p;
 412 out:
 413        release_firmware(fw);
 414        return p->bits;
 415}
 416
 417static unsigned char *get_mcs(int bitrate)
 418{
 419        struct yam_mcs *p;
 420
 421        p = yam_data;
 422        while (p) {
 423                if (p->bitrate == bitrate)
 424                        return p->bits;
 425                p = p->next;
 426        }
 427
 428        /* Load predefined mcs data */
 429        switch (bitrate) {
 430        case 1200:
 431                /* setting predef as YAM_1200 for loading predef 1200 mcs */
 432                return add_mcs(NULL, bitrate, YAM_1200);
 433        default:
 434                /* setting predef as YAM_9600 for loading predef 9600 mcs */
 435                return add_mcs(NULL, bitrate, YAM_9600);
 436        }
 437}
 438
 439/*
 440 * download bitstream to FPGA
 441 * data is contained in bits[] array in yam1200.h resp. yam9600.h
 442 */
 443
 444static int fpga_download(int iobase, int bitrate)
 445{
 446        int i, rc;
 447        unsigned char *pbits;
 448
 449        pbits = get_mcs(bitrate);
 450        if (pbits == NULL)
 451                return -1;
 452
 453        fpga_reset(iobase);
 454        for (i = 0; i < YAM_FPGA_SIZE; i++) {
 455                if (fpga_write(iobase, pbits[i])) {
 456                        printk(KERN_ERR "yam: error in write cycle\n");
 457                        return -1;                      /* write... */
 458                }
 459        }
 460
 461        fpga_write(iobase, 0xFF);
 462        rc = inb(MSR(iobase));          /* check DONE signal */
 463
 464        /* Needed for some hardwares */
 465        delay(50);
 466
 467        return (rc & MSR_DSR) ? 0 : -1;
 468}
 469
 470
 471/************************************************************************
 472* Serial port init 
 473************************************************************************/
 474
 475static void yam_set_uart(struct net_device *dev)
 476{
 477        struct yam_port *yp = netdev_priv(dev);
 478        int divisor = 115200 / yp->baudrate;
 479
 480        outb(0, IER(dev->base_addr));
 481        outb(LCR_DLAB | LCR_BIT8, LCR(dev->base_addr));
 482        outb(divisor, DLL(dev->base_addr));
 483        outb(0, DLM(dev->base_addr));
 484        outb(LCR_BIT8, LCR(dev->base_addr));
 485        outb(PTT_OFF, MCR(dev->base_addr));
 486        outb(0x00, FCR(dev->base_addr));
 487
 488        /* Flush pending irq */
 489
 490        inb(RBR(dev->base_addr));
 491        inb(MSR(dev->base_addr));
 492
 493        /* Enable rx irq */
 494
 495        outb(ENABLE_RTXINT, IER(dev->base_addr));
 496}
 497
 498
 499/* --------------------------------------------------------------------- */
 500
 501enum uart {
 502        c_uart_unknown, c_uart_8250,
 503        c_uart_16450, c_uart_16550, c_uart_16550A
 504};
 505
 506static const char *uart_str[] =
 507{"unknown", "8250", "16450", "16550", "16550A"};
 508
 509static enum uart yam_check_uart(unsigned int iobase)
 510{
 511        unsigned char b1, b2, b3;
 512        enum uart u;
 513        enum uart uart_tab[] =
 514        {c_uart_16450, c_uart_unknown, c_uart_16550, c_uart_16550A};
 515
 516        b1 = inb(MCR(iobase));
 517        outb(b1 | 0x10, MCR(iobase));   /* loopback mode */
 518        b2 = inb(MSR(iobase));
 519        outb(0x1a, MCR(iobase));
 520        b3 = inb(MSR(iobase)) & 0xf0;
 521        outb(b1, MCR(iobase));          /* restore old values */
 522        outb(b2, MSR(iobase));
 523        if (b3 != 0x90)
 524                return c_uart_unknown;
 525        inb(RBR(iobase));
 526        inb(RBR(iobase));
 527        outb(0x01, FCR(iobase));        /* enable FIFOs */
 528        u = uart_tab[(inb(IIR(iobase)) >> 6) & 3];
 529        if (u == c_uart_16450) {
 530                outb(0x5a, SCR(iobase));
 531                b1 = inb(SCR(iobase));
 532                outb(0xa5, SCR(iobase));
 533                b2 = inb(SCR(iobase));
 534                if ((b1 != 0x5a) || (b2 != 0xa5))
 535                        u = c_uart_8250;
 536        }
 537        return u;
 538}
 539
 540/******************************************************************************
 541* Rx Section
 542******************************************************************************/
 543static inline void yam_rx_flag(struct net_device *dev, struct yam_port *yp)
 544{
 545        if (yp->dcd && yp->rx_len >= 3 && yp->rx_len < YAM_MAX_FRAME) {
 546                int pkt_len = yp->rx_len - 2 + 1;       /* -CRC + kiss */
 547                struct sk_buff *skb;
 548
 549                if ((yp->rx_crch & yp->rx_crcl) != 0xFF) {
 550                        /* Bad crc */
 551                } else {
 552                        if (!(skb = dev_alloc_skb(pkt_len))) {
 553                                printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name);
 554                                ++dev->stats.rx_dropped;
 555                        } else {
 556                                unsigned char *cp;
 557                                cp = skb_put(skb, pkt_len);
 558                                *cp++ = 0;              /* KISS kludge */
 559                                memcpy(cp, yp->rx_buf, pkt_len - 1);
 560                                skb->protocol = ax25_type_trans(skb, dev);
 561                                netif_rx(skb);
 562                                ++dev->stats.rx_packets;
 563                        }
 564                }
 565        }
 566        yp->rx_len = 0;
 567        yp->rx_crcl = 0x21;
 568        yp->rx_crch = 0xf3;
 569}
 570
 571static inline void yam_rx_byte(struct net_device *dev, struct yam_port *yp, unsigned char rxb)
 572{
 573        if (yp->rx_len < YAM_MAX_FRAME) {
 574                unsigned char c = yp->rx_crcl;
 575                yp->rx_crcl = (chktabl[c] ^ yp->rx_crch);
 576                yp->rx_crch = (chktabh[c] ^ rxb);
 577                yp->rx_buf[yp->rx_len++] = rxb;
 578        }
 579}
 580
 581/********************************************************************************
 582* TX Section
 583********************************************************************************/
 584
 585static void ptt_on(struct net_device *dev)
 586{
 587        outb(PTT_ON, MCR(dev->base_addr));
 588}
 589
 590static void ptt_off(struct net_device *dev)
 591{
 592        outb(PTT_OFF, MCR(dev->base_addr));
 593}
 594
 595static netdev_tx_t yam_send_packet(struct sk_buff *skb,
 596                                         struct net_device *dev)
 597{
 598        struct yam_port *yp = netdev_priv(dev);
 599
 600        if (skb->protocol == htons(ETH_P_IP))
 601                return ax25_ip_xmit(skb);
 602
 603        skb_queue_tail(&yp->send_queue, skb);
 604        netif_trans_update(dev);
 605        return NETDEV_TX_OK;
 606}
 607
 608static void yam_start_tx(struct net_device *dev, struct yam_port *yp)
 609{
 610        if ((yp->tx_state == TX_TAIL) || (yp->txd == 0))
 611                yp->tx_count = 1;
 612        else
 613                yp->tx_count = (yp->bitrate * yp->txd) / 8000;
 614        yp->tx_state = TX_HEAD;
 615        ptt_on(dev);
 616}
 617
 618static void yam_arbitrate(struct net_device *dev)
 619{
 620        struct yam_port *yp = netdev_priv(dev);
 621
 622        if (yp->magic != YAM_MAGIC || yp->tx_state != TX_OFF ||
 623            skb_queue_empty(&yp->send_queue))
 624                return;
 625        /* tx_state is TX_OFF and there is data to send */
 626
 627        if (yp->dupmode) {
 628                /* Full duplex mode, don't wait */
 629                yam_start_tx(dev, yp);
 630                return;
 631        }
 632        if (yp->dcd) {
 633                /* DCD on, wait slotime ... */
 634                yp->slotcnt = yp->slot / 10;
 635                return;
 636        }
 637        /* Is slottime passed ? */
 638        if ((--yp->slotcnt) > 0)
 639                return;
 640
 641        yp->slotcnt = yp->slot / 10;
 642
 643        /* is random > persist ? */
 644        if ((prandom_u32() % 256) > yp->pers)
 645                return;
 646
 647        yam_start_tx(dev, yp);
 648}
 649
 650static void yam_dotimer(struct timer_list *unused)
 651{
 652        int i;
 653
 654        for (i = 0; i < NR_PORTS; i++) {
 655                struct net_device *dev = yam_devs[i];
 656                if (dev && netif_running(dev))
 657                        yam_arbitrate(dev);
 658        }
 659        yam_timer.expires = jiffies + HZ / 100;
 660        add_timer(&yam_timer);
 661}
 662
 663static void yam_tx_byte(struct net_device *dev, struct yam_port *yp)
 664{
 665        struct sk_buff *skb;
 666        unsigned char b, temp;
 667
 668        switch (yp->tx_state) {
 669        case TX_OFF:
 670                break;
 671        case TX_HEAD:
 672                if (--yp->tx_count <= 0) {
 673                        if (!(skb = skb_dequeue(&yp->send_queue))) {
 674                                ptt_off(dev);
 675                                yp->tx_state = TX_OFF;
 676                                break;
 677                        }
 678                        yp->tx_state = TX_DATA;
 679                        if (skb->data[0] != 0) {
 680/*                              do_kiss_params(s, skb->data, skb->len); */
 681                                dev_kfree_skb_any(skb);
 682                                break;
 683                        }
 684                        yp->tx_len = skb->len - 1;      /* strip KISS byte */
 685                        if (yp->tx_len >= YAM_MAX_FRAME || yp->tx_len < 2) {
 686                                dev_kfree_skb_any(skb);
 687                                break;
 688                        }
 689                        skb_copy_from_linear_data_offset(skb, 1,
 690                                                         yp->tx_buf,
 691                                                         yp->tx_len);
 692                        dev_kfree_skb_any(skb);
 693                        yp->tx_count = 0;
 694                        yp->tx_crcl = 0x21;
 695                        yp->tx_crch = 0xf3;
 696                        yp->tx_state = TX_DATA;
 697                }
 698                break;
 699        case TX_DATA:
 700                b = yp->tx_buf[yp->tx_count++];
 701                outb(b, THR(dev->base_addr));
 702                temp = yp->tx_crcl;
 703                yp->tx_crcl = chktabl[temp] ^ yp->tx_crch;
 704                yp->tx_crch = chktabh[temp] ^ b;
 705                if (yp->tx_count >= yp->tx_len) {
 706                        yp->tx_state = TX_CRC1;
 707                }
 708                break;
 709        case TX_CRC1:
 710                yp->tx_crch = chktabl[yp->tx_crcl] ^ yp->tx_crch;
 711                yp->tx_crcl = chktabh[yp->tx_crcl] ^ chktabl[yp->tx_crch] ^ 0xff;
 712                outb(yp->tx_crcl, THR(dev->base_addr));
 713                yp->tx_state = TX_CRC2;
 714                break;
 715        case TX_CRC2:
 716                outb(chktabh[yp->tx_crch] ^ 0xFF, THR(dev->base_addr));
 717                if (skb_queue_empty(&yp->send_queue)) {
 718                        yp->tx_count = (yp->bitrate * yp->txtail) / 8000;
 719                        if (yp->dupmode == 2)
 720                                yp->tx_count += (yp->bitrate * yp->holdd) / 8;
 721                        if (yp->tx_count == 0)
 722                                yp->tx_count = 1;
 723                        yp->tx_state = TX_TAIL;
 724                } else {
 725                        yp->tx_count = 1;
 726                        yp->tx_state = TX_HEAD;
 727                }
 728                ++dev->stats.tx_packets;
 729                break;
 730        case TX_TAIL:
 731                if (--yp->tx_count <= 0) {
 732                        yp->tx_state = TX_OFF;
 733                        ptt_off(dev);
 734                }
 735                break;
 736        }
 737}
 738
 739/***********************************************************************************
 740* ISR routine
 741************************************************************************************/
 742
 743static irqreturn_t yam_interrupt(int irq, void *dev_id)
 744{
 745        struct net_device *dev;
 746        struct yam_port *yp;
 747        unsigned char iir;
 748        int counter = 100;
 749        int i;
 750        int handled = 0;
 751
 752        for (i = 0; i < NR_PORTS; i++) {
 753                dev = yam_devs[i];
 754                yp = netdev_priv(dev);
 755
 756                if (!netif_running(dev))
 757                        continue;
 758
 759                while ((iir = IIR_MASK & inb(IIR(dev->base_addr))) != IIR_NOPEND) {
 760                        unsigned char msr = inb(MSR(dev->base_addr));
 761                        unsigned char lsr = inb(LSR(dev->base_addr));
 762                        unsigned char rxb;
 763
 764                        handled = 1;
 765
 766                        if (lsr & LSR_OE)
 767                                ++dev->stats.rx_fifo_errors;
 768
 769                        yp->dcd = (msr & RX_DCD) ? 1 : 0;
 770
 771                        if (--counter <= 0) {
 772                                printk(KERN_ERR "%s: too many irq iir=%d\n",
 773                                                dev->name, iir);
 774                                goto out;
 775                        }
 776                        if (msr & TX_RDY) {
 777                                ++yp->nb_mdint;
 778                                yam_tx_byte(dev, yp);
 779                        }
 780                        if (lsr & LSR_RXC) {
 781                                ++yp->nb_rxint;
 782                                rxb = inb(RBR(dev->base_addr));
 783                                if (msr & RX_FLAG)
 784                                        yam_rx_flag(dev, yp);
 785                                else
 786                                        yam_rx_byte(dev, yp, rxb);
 787                        }
 788                }
 789        }
 790out:
 791        return IRQ_RETVAL(handled);
 792}
 793
 794#ifdef CONFIG_PROC_FS
 795
 796static void *yam_seq_start(struct seq_file *seq, loff_t *pos)
 797{
 798        return (*pos < NR_PORTS) ? yam_devs[*pos] : NULL;
 799}
 800
 801static void *yam_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 802{
 803        ++*pos;
 804        return (*pos < NR_PORTS) ? yam_devs[*pos] : NULL;
 805}
 806
 807static void yam_seq_stop(struct seq_file *seq, void *v)
 808{
 809}
 810
 811static int yam_seq_show(struct seq_file *seq, void *v)
 812{
 813        struct net_device *dev = v;
 814        const struct yam_port *yp = netdev_priv(dev);
 815
 816        seq_printf(seq, "Device %s\n", dev->name);
 817        seq_printf(seq, "  Up       %d\n", netif_running(dev));
 818        seq_printf(seq, "  Speed    %u\n", yp->bitrate);
 819        seq_printf(seq, "  IoBase   0x%x\n", yp->iobase);
 820        seq_printf(seq, "  BaudRate %u\n", yp->baudrate);
 821        seq_printf(seq, "  IRQ      %u\n", yp->irq);
 822        seq_printf(seq, "  TxState  %u\n", yp->tx_state);
 823        seq_printf(seq, "  Duplex   %u\n", yp->dupmode);
 824        seq_printf(seq, "  HoldDly  %u\n", yp->holdd);
 825        seq_printf(seq, "  TxDelay  %u\n", yp->txd);
 826        seq_printf(seq, "  TxTail   %u\n", yp->txtail);
 827        seq_printf(seq, "  SlotTime %u\n", yp->slot);
 828        seq_printf(seq, "  Persist  %u\n", yp->pers);
 829        seq_printf(seq, "  TxFrames %lu\n", dev->stats.tx_packets);
 830        seq_printf(seq, "  RxFrames %lu\n", dev->stats.rx_packets);
 831        seq_printf(seq, "  TxInt    %u\n", yp->nb_mdint);
 832        seq_printf(seq, "  RxInt    %u\n", yp->nb_rxint);
 833        seq_printf(seq, "  RxOver   %lu\n", dev->stats.rx_fifo_errors);
 834        seq_printf(seq, "\n");
 835        return 0;
 836}
 837
 838static const struct seq_operations yam_seqops = {
 839        .start = yam_seq_start,
 840        .next = yam_seq_next,
 841        .stop = yam_seq_stop,
 842        .show = yam_seq_show,
 843};
 844#endif
 845
 846
 847/* --------------------------------------------------------------------- */
 848
 849static int yam_open(struct net_device *dev)
 850{
 851        struct yam_port *yp = netdev_priv(dev);
 852        enum uart u;
 853        int i;
 854        int ret=0;
 855
 856        printk(KERN_INFO "Trying %s at iobase 0x%lx irq %u\n", dev->name, dev->base_addr, dev->irq);
 857
 858        if (!yp->bitrate)
 859                return -ENXIO;
 860        if (!dev->base_addr || dev->base_addr > 0x1000 - YAM_EXTENT ||
 861                dev->irq < 2 || dev->irq > 15) {
 862                return -ENXIO;
 863        }
 864        if (!request_region(dev->base_addr, YAM_EXTENT, dev->name))
 865        {
 866                printk(KERN_ERR "%s: cannot 0x%lx busy\n", dev->name, dev->base_addr);
 867                return -EACCES;
 868        }
 869        if ((u = yam_check_uart(dev->base_addr)) == c_uart_unknown) {
 870                printk(KERN_ERR "%s: cannot find uart type\n", dev->name);
 871                ret = -EIO;
 872                goto out_release_base;
 873        }
 874        if (fpga_download(dev->base_addr, yp->bitrate)) {
 875                printk(KERN_ERR "%s: cannot init FPGA\n", dev->name);
 876                ret = -EIO;
 877                goto out_release_base;
 878        }
 879        outb(0, IER(dev->base_addr));
 880        if (request_irq(dev->irq, yam_interrupt, IRQF_SHARED, dev->name, dev)) {
 881                printk(KERN_ERR "%s: irq %d busy\n", dev->name, dev->irq);
 882                ret = -EBUSY;
 883                goto out_release_base;
 884        }
 885
 886        yam_set_uart(dev);
 887
 888        netif_start_queue(dev);
 889        
 890        yp->slotcnt = yp->slot / 10;
 891
 892        /* Reset overruns for all ports - FPGA programming makes overruns */
 893        for (i = 0; i < NR_PORTS; i++) {
 894                struct net_device *yam_dev = yam_devs[i];
 895
 896                inb(LSR(yam_dev->base_addr));
 897                yam_dev->stats.rx_fifo_errors = 0;
 898        }
 899
 900        printk(KERN_INFO "%s at iobase 0x%lx irq %u uart %s\n", dev->name, dev->base_addr, dev->irq,
 901                   uart_str[u]);
 902        return 0;
 903
 904out_release_base:
 905        release_region(dev->base_addr, YAM_EXTENT);
 906        return ret;
 907}
 908
 909/* --------------------------------------------------------------------- */
 910
 911static int yam_close(struct net_device *dev)
 912{
 913        struct sk_buff *skb;
 914        struct yam_port *yp = netdev_priv(dev);
 915
 916        if (!dev)
 917                return -EINVAL;
 918
 919        /*
 920         * disable interrupts
 921         */
 922        outb(0, IER(dev->base_addr));
 923        outb(1, MCR(dev->base_addr));
 924        /* Remove IRQ handler if last */
 925        free_irq(dev->irq,dev);
 926        release_region(dev->base_addr, YAM_EXTENT);
 927        netif_stop_queue(dev);
 928        while ((skb = skb_dequeue(&yp->send_queue)))
 929                dev_kfree_skb(skb);
 930
 931        printk(KERN_INFO "%s: close yam at iobase 0x%lx irq %u\n",
 932                   yam_drvname, dev->base_addr, dev->irq);
 933        return 0;
 934}
 935
 936/* --------------------------------------------------------------------- */
 937
 938static int yam_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 939{
 940        struct yam_port *yp = netdev_priv(dev);
 941        struct yamdrv_ioctl_cfg yi;
 942        struct yamdrv_ioctl_mcs *ym;
 943        int ioctl_cmd;
 944
 945        if (copy_from_user(&ioctl_cmd, ifr->ifr_data, sizeof(int)))
 946                 return -EFAULT;
 947
 948        if (yp->magic != YAM_MAGIC)
 949                return -EINVAL;
 950
 951        if (!capable(CAP_NET_ADMIN))
 952                return -EPERM;
 953
 954        if (cmd != SIOCDEVPRIVATE)
 955                return -EINVAL;
 956
 957        switch (ioctl_cmd) {
 958
 959        case SIOCYAMRESERVED:
 960                return -EINVAL;                 /* unused */
 961
 962        case SIOCYAMSMCS:
 963                if (netif_running(dev))
 964                        return -EINVAL;         /* Cannot change this parameter when up */
 965                ym = memdup_user(ifr->ifr_data,
 966                                 sizeof(struct yamdrv_ioctl_mcs));
 967                if (IS_ERR(ym))
 968                        return PTR_ERR(ym);
 969                if (ym->cmd != SIOCYAMSMCS)
 970                        return -EINVAL;
 971                if (ym->bitrate > YAM_MAXBITRATE) {
 972                        kfree(ym);
 973                        return -EINVAL;
 974                }
 975                /* setting predef as 0 for loading userdefined mcs data */
 976                add_mcs(ym->bits, ym->bitrate, 0);
 977                kfree(ym);
 978                break;
 979
 980        case SIOCYAMSCFG:
 981                if (!capable(CAP_SYS_RAWIO))
 982                        return -EPERM;
 983                if (copy_from_user(&yi, ifr->ifr_data, sizeof(struct yamdrv_ioctl_cfg)))
 984                         return -EFAULT;
 985
 986                if (yi.cmd != SIOCYAMSCFG)
 987                        return -EINVAL;
 988                if ((yi.cfg.mask & YAM_IOBASE) && netif_running(dev))
 989                        return -EINVAL;         /* Cannot change this parameter when up */
 990                if ((yi.cfg.mask & YAM_IRQ) && netif_running(dev))
 991                        return -EINVAL;         /* Cannot change this parameter when up */
 992                if ((yi.cfg.mask & YAM_BITRATE) && netif_running(dev))
 993                        return -EINVAL;         /* Cannot change this parameter when up */
 994                if ((yi.cfg.mask & YAM_BAUDRATE) && netif_running(dev))
 995                        return -EINVAL;         /* Cannot change this parameter when up */
 996
 997                if (yi.cfg.mask & YAM_IOBASE) {
 998                        yp->iobase = yi.cfg.iobase;
 999                        dev->base_addr = yi.cfg.iobase;
1000                }
1001                if (yi.cfg.mask & YAM_IRQ) {
1002                        if (yi.cfg.irq > 15)
1003                                return -EINVAL;
1004                        yp->irq = yi.cfg.irq;
1005                        dev->irq = yi.cfg.irq;
1006                }
1007                if (yi.cfg.mask & YAM_BITRATE) {
1008                        if (yi.cfg.bitrate > YAM_MAXBITRATE)
1009                                return -EINVAL;
1010                        yp->bitrate = yi.cfg.bitrate;
1011                }
1012                if (yi.cfg.mask & YAM_BAUDRATE) {
1013                        if (yi.cfg.baudrate > YAM_MAXBAUDRATE)
1014                                return -EINVAL;
1015                        yp->baudrate = yi.cfg.baudrate;
1016                }
1017                if (yi.cfg.mask & YAM_MODE) {
1018                        if (yi.cfg.mode > YAM_MAXMODE)
1019                                return -EINVAL;
1020                        yp->dupmode = yi.cfg.mode;
1021                }
1022                if (yi.cfg.mask & YAM_HOLDDLY) {
1023                        if (yi.cfg.holddly > YAM_MAXHOLDDLY)
1024                                return -EINVAL;
1025                        yp->holdd = yi.cfg.holddly;
1026                }
1027                if (yi.cfg.mask & YAM_TXDELAY) {
1028                        if (yi.cfg.txdelay > YAM_MAXTXDELAY)
1029                                return -EINVAL;
1030                        yp->txd = yi.cfg.txdelay;
1031                }
1032                if (yi.cfg.mask & YAM_TXTAIL) {
1033                        if (yi.cfg.txtail > YAM_MAXTXTAIL)
1034                                return -EINVAL;
1035                        yp->txtail = yi.cfg.txtail;
1036                }
1037                if (yi.cfg.mask & YAM_PERSIST) {
1038                        if (yi.cfg.persist > YAM_MAXPERSIST)
1039                                return -EINVAL;
1040                        yp->pers = yi.cfg.persist;
1041                }
1042                if (yi.cfg.mask & YAM_SLOTTIME) {
1043                        if (yi.cfg.slottime > YAM_MAXSLOTTIME)
1044                                return -EINVAL;
1045                        yp->slot = yi.cfg.slottime;
1046                        yp->slotcnt = yp->slot / 10;
1047                }
1048                break;
1049
1050        case SIOCYAMGCFG:
1051                memset(&yi, 0, sizeof(yi));
1052                yi.cfg.mask = 0xffffffff;
1053                yi.cfg.iobase = yp->iobase;
1054                yi.cfg.irq = yp->irq;
1055                yi.cfg.bitrate = yp->bitrate;
1056                yi.cfg.baudrate = yp->baudrate;
1057                yi.cfg.mode = yp->dupmode;
1058                yi.cfg.txdelay = yp->txd;
1059                yi.cfg.holddly = yp->holdd;
1060                yi.cfg.txtail = yp->txtail;
1061                yi.cfg.persist = yp->pers;
1062                yi.cfg.slottime = yp->slot;
1063                if (copy_to_user(ifr->ifr_data, &yi, sizeof(struct yamdrv_ioctl_cfg)))
1064                         return -EFAULT;
1065                break;
1066
1067        default:
1068                return -EINVAL;
1069
1070        }
1071
1072        return 0;
1073}
1074
1075/* --------------------------------------------------------------------- */
1076
1077static int yam_set_mac_address(struct net_device *dev, void *addr)
1078{
1079        struct sockaddr *sa = (struct sockaddr *) addr;
1080
1081        /* addr is an AX.25 shifted ASCII mac address */
1082        memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
1083        return 0;
1084}
1085
1086/* --------------------------------------------------------------------- */
1087
1088static const struct net_device_ops yam_netdev_ops = {
1089        .ndo_open            = yam_open,
1090        .ndo_stop            = yam_close,
1091        .ndo_start_xmit      = yam_send_packet,
1092        .ndo_do_ioctl        = yam_ioctl,
1093        .ndo_set_mac_address = yam_set_mac_address,
1094};
1095
1096static void yam_setup(struct net_device *dev)
1097{
1098        struct yam_port *yp = netdev_priv(dev);
1099
1100        yp->magic = YAM_MAGIC;
1101        yp->bitrate = DEFAULT_BITRATE;
1102        yp->baudrate = DEFAULT_BITRATE * 2;
1103        yp->iobase = 0;
1104        yp->irq = 0;
1105        yp->dupmode = 0;
1106        yp->holdd = DEFAULT_HOLDD;
1107        yp->txd = DEFAULT_TXD;
1108        yp->txtail = DEFAULT_TXTAIL;
1109        yp->slot = DEFAULT_SLOT;
1110        yp->pers = DEFAULT_PERS;
1111        yp->dev = dev;
1112
1113        dev->base_addr = yp->iobase;
1114        dev->irq = yp->irq;
1115
1116        skb_queue_head_init(&yp->send_queue);
1117
1118        dev->netdev_ops = &yam_netdev_ops;
1119        dev->header_ops = &ax25_header_ops;
1120
1121        dev->type = ARPHRD_AX25;
1122        dev->hard_header_len = AX25_MAX_HEADER_LEN;
1123        dev->mtu = AX25_MTU;
1124        dev->addr_len = AX25_ADDR_LEN;
1125        memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
1126        memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN);
1127}
1128
1129static int __init yam_init_driver(void)
1130{
1131        struct net_device *dev;
1132        int i, err;
1133        char name[IFNAMSIZ];
1134
1135        printk(yam_drvinfo);
1136
1137        for (i = 0; i < NR_PORTS; i++) {
1138                sprintf(name, "yam%d", i);
1139                
1140                dev = alloc_netdev(sizeof(struct yam_port), name,
1141                                   NET_NAME_UNKNOWN, yam_setup);
1142                if (!dev) {
1143                        pr_err("yam: cannot allocate net device\n");
1144                        err = -ENOMEM;
1145                        goto error;
1146                }
1147                
1148                err = register_netdev(dev);
1149                if (err) {
1150                        printk(KERN_WARNING "yam: cannot register net device %s\n", dev->name);
1151                        goto error;
1152                }
1153                yam_devs[i] = dev;
1154
1155        }
1156
1157        timer_setup(&yam_timer, yam_dotimer, 0);
1158        yam_timer.expires = jiffies + HZ / 100;
1159        add_timer(&yam_timer);
1160
1161        proc_create_seq("yam", 0444, init_net.proc_net, &yam_seqops);
1162        return 0;
1163 error:
1164        while (--i >= 0) {
1165                unregister_netdev(yam_devs[i]);
1166                free_netdev(yam_devs[i]);
1167        }
1168        return err;
1169}
1170
1171/* --------------------------------------------------------------------- */
1172
1173static void __exit yam_cleanup_driver(void)
1174{
1175        struct yam_mcs *p;
1176        int i;
1177
1178        del_timer_sync(&yam_timer);
1179        for (i = 0; i < NR_PORTS; i++) {
1180                struct net_device *dev = yam_devs[i];
1181                if (dev) {
1182                        unregister_netdev(dev);
1183                        free_netdev(dev);
1184                }
1185        }
1186
1187        while (yam_data) {
1188                p = yam_data;
1189                yam_data = yam_data->next;
1190                kfree(p);
1191        }
1192
1193        remove_proc_entry("yam", init_net.proc_net);
1194}
1195
1196/* --------------------------------------------------------------------- */
1197
1198MODULE_AUTHOR("Frederic Rible F1OAT frible@teaser.fr");
1199MODULE_DESCRIPTION("Yam amateur radio modem driver");
1200MODULE_LICENSE("GPL");
1201MODULE_FIRMWARE(FIRMWARE_1200);
1202MODULE_FIRMWARE(FIRMWARE_9600);
1203
1204module_init(yam_init_driver);
1205module_exit(yam_cleanup_driver);
1206
1207/* --------------------------------------------------------------------- */
1208
1209