linux/drivers/power/supply/bq25890_charger.c
<<
>>
Prefs
   1/*
   2 * TI BQ25890 charger driver
   3 *
   4 * Copyright (C) 2015 Intel Corporation
   5 *
   6 * This program is free software; you can redistribute it and/or modify
   7 * it under the terms of the GNU General Public License as published by
   8 * the Free Software Foundation; either version 2 of the License, or
   9 * (at your option) any later version.
  10 *
  11 * This program is distributed in the hope that it will be useful,
  12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 * GNU General Public License for more details.
  15 *
  16 */
  17
  18#include <linux/module.h>
  19#include <linux/i2c.h>
  20#include <linux/power_supply.h>
  21#include <linux/regmap.h>
  22#include <linux/types.h>
  23#include <linux/gpio/consumer.h>
  24#include <linux/interrupt.h>
  25#include <linux/delay.h>
  26#include <linux/usb/phy.h>
  27
  28#include <linux/acpi.h>
  29#include <linux/of.h>
  30
  31#define BQ25890_MANUFACTURER            "Texas Instruments"
  32#define BQ25890_IRQ_PIN                 "bq25890_irq"
  33
  34#define BQ25890_ID                      3
  35#define BQ25896_ID                      0
  36
  37enum bq25890_fields {
  38        F_EN_HIZ, F_EN_ILIM, F_IILIM,                                /* Reg00 */
  39        F_BHOT, F_BCOLD, F_VINDPM_OFS,                               /* Reg01 */
  40        F_CONV_START, F_CONV_RATE, F_BOOSTF, F_ICO_EN,
  41        F_HVDCP_EN, F_MAXC_EN, F_FORCE_DPM, F_AUTO_DPDM_EN,          /* Reg02 */
  42        F_BAT_LOAD_EN, F_WD_RST, F_OTG_CFG, F_CHG_CFG, F_SYSVMIN,    /* Reg03 */
  43        F_PUMPX_EN, F_ICHG,                                          /* Reg04 */
  44        F_IPRECHG, F_ITERM,                                          /* Reg05 */
  45        F_VREG, F_BATLOWV, F_VRECHG,                                 /* Reg06 */
  46        F_TERM_EN, F_STAT_DIS, F_WD, F_TMR_EN, F_CHG_TMR,
  47        F_JEITA_ISET,                                                /* Reg07 */
  48        F_BATCMP, F_VCLAMP, F_TREG,                                  /* Reg08 */
  49        F_FORCE_ICO, F_TMR2X_EN, F_BATFET_DIS, F_JEITA_VSET,
  50        F_BATFET_DLY, F_BATFET_RST_EN, F_PUMPX_UP, F_PUMPX_DN,       /* Reg09 */
  51        F_BOOSTV, F_BOOSTI,                                          /* Reg0A */
  52        F_VBUS_STAT, F_CHG_STAT, F_PG_STAT, F_SDP_STAT, F_VSYS_STAT, /* Reg0B */
  53        F_WD_FAULT, F_BOOST_FAULT, F_CHG_FAULT, F_BAT_FAULT,
  54        F_NTC_FAULT,                                                 /* Reg0C */
  55        F_FORCE_VINDPM, F_VINDPM,                                    /* Reg0D */
  56        F_THERM_STAT, F_BATV,                                        /* Reg0E */
  57        F_SYSV,                                                      /* Reg0F */
  58        F_TSPCT,                                                     /* Reg10 */
  59        F_VBUS_GD, F_VBUSV,                                          /* Reg11 */
  60        F_ICHGR,                                                     /* Reg12 */
  61        F_VDPM_STAT, F_IDPM_STAT, F_IDPM_LIM,                        /* Reg13 */
  62        F_REG_RST, F_ICO_OPTIMIZED, F_PN, F_TS_PROFILE, F_DEV_REV,   /* Reg14 */
  63
  64        F_MAX_FIELDS
  65};
  66
  67/* initial field values, converted to register values */
  68struct bq25890_init_data {
  69        u8 ichg;        /* charge current               */
  70        u8 vreg;        /* regulation voltage           */
  71        u8 iterm;       /* termination current          */
  72        u8 iprechg;     /* precharge current            */
  73        u8 sysvmin;     /* minimum system voltage limit */
  74        u8 boostv;      /* boost regulation voltage     */
  75        u8 boosti;      /* boost current limit          */
  76        u8 boostf;      /* boost frequency              */
  77        u8 ilim_en;     /* enable ILIM pin              */
  78        u8 treg;        /* thermal regulation threshold */
  79};
  80
  81struct bq25890_state {
  82        u8 online;
  83        u8 chrg_status;
  84        u8 chrg_fault;
  85        u8 vsys_status;
  86        u8 boost_fault;
  87        u8 bat_fault;
  88};
  89
  90struct bq25890_device {
  91        struct i2c_client *client;
  92        struct device *dev;
  93        struct power_supply *charger;
  94
  95        struct usb_phy *usb_phy;
  96        struct notifier_block usb_nb;
  97        struct work_struct usb_work;
  98        unsigned long usb_event;
  99
 100        struct regmap *rmap;
 101        struct regmap_field *rmap_fields[F_MAX_FIELDS];
 102
 103        int chip_id;
 104        struct bq25890_init_data init_data;
 105        struct bq25890_state state;
 106
 107        struct mutex lock; /* protect state data */
 108};
 109
 110static const struct regmap_range bq25890_readonly_reg_ranges[] = {
 111        regmap_reg_range(0x0b, 0x0c),
 112        regmap_reg_range(0x0e, 0x13),
 113};
 114
 115static const struct regmap_access_table bq25890_writeable_regs = {
 116        .no_ranges = bq25890_readonly_reg_ranges,
 117        .n_no_ranges = ARRAY_SIZE(bq25890_readonly_reg_ranges),
 118};
 119
 120static const struct regmap_range bq25890_volatile_reg_ranges[] = {
 121        regmap_reg_range(0x00, 0x00),
 122        regmap_reg_range(0x09, 0x09),
 123        regmap_reg_range(0x0b, 0x0c),
 124        regmap_reg_range(0x0e, 0x14),
 125};
 126
 127static const struct regmap_access_table bq25890_volatile_regs = {
 128        .yes_ranges = bq25890_volatile_reg_ranges,
 129        .n_yes_ranges = ARRAY_SIZE(bq25890_volatile_reg_ranges),
 130};
 131
 132static const struct regmap_config bq25890_regmap_config = {
 133        .reg_bits = 8,
 134        .val_bits = 8,
 135
 136        .max_register = 0x14,
 137        .cache_type = REGCACHE_RBTREE,
 138
 139        .wr_table = &bq25890_writeable_regs,
 140        .volatile_table = &bq25890_volatile_regs,
 141};
 142
 143static const struct reg_field bq25890_reg_fields[] = {
 144        /* REG00 */
 145        [F_EN_HIZ]              = REG_FIELD(0x00, 7, 7),
 146        [F_EN_ILIM]             = REG_FIELD(0x00, 6, 6),
 147        [F_IILIM]               = REG_FIELD(0x00, 0, 5),
 148        /* REG01 */
 149        [F_BHOT]                = REG_FIELD(0x01, 6, 7),
 150        [F_BCOLD]               = REG_FIELD(0x01, 5, 5),
 151        [F_VINDPM_OFS]          = REG_FIELD(0x01, 0, 4),
 152        /* REG02 */
 153        [F_CONV_START]          = REG_FIELD(0x02, 7, 7),
 154        [F_CONV_RATE]           = REG_FIELD(0x02, 6, 6),
 155        [F_BOOSTF]              = REG_FIELD(0x02, 5, 5),
 156        [F_ICO_EN]              = REG_FIELD(0x02, 4, 4),
 157        [F_HVDCP_EN]            = REG_FIELD(0x02, 3, 3),  // reserved on BQ25896
 158        [F_MAXC_EN]             = REG_FIELD(0x02, 2, 2),  // reserved on BQ25896
 159        [F_FORCE_DPM]           = REG_FIELD(0x02, 1, 1),
 160        [F_AUTO_DPDM_EN]        = REG_FIELD(0x02, 0, 0),
 161        /* REG03 */
 162        [F_BAT_LOAD_EN]         = REG_FIELD(0x03, 7, 7),
 163        [F_WD_RST]              = REG_FIELD(0x03, 6, 6),
 164        [F_OTG_CFG]             = REG_FIELD(0x03, 5, 5),
 165        [F_CHG_CFG]             = REG_FIELD(0x03, 4, 4),
 166        [F_SYSVMIN]             = REG_FIELD(0x03, 1, 3),
 167        /* MIN_VBAT_SEL on BQ25896 */
 168        /* REG04 */
 169        [F_PUMPX_EN]            = REG_FIELD(0x04, 7, 7),
 170        [F_ICHG]                = REG_FIELD(0x04, 0, 6),
 171        /* REG05 */
 172        [F_IPRECHG]             = REG_FIELD(0x05, 4, 7),
 173        [F_ITERM]               = REG_FIELD(0x05, 0, 3),
 174        /* REG06 */
 175        [F_VREG]                = REG_FIELD(0x06, 2, 7),
 176        [F_BATLOWV]             = REG_FIELD(0x06, 1, 1),
 177        [F_VRECHG]              = REG_FIELD(0x06, 0, 0),
 178        /* REG07 */
 179        [F_TERM_EN]             = REG_FIELD(0x07, 7, 7),
 180        [F_STAT_DIS]            = REG_FIELD(0x07, 6, 6),
 181        [F_WD]                  = REG_FIELD(0x07, 4, 5),
 182        [F_TMR_EN]              = REG_FIELD(0x07, 3, 3),
 183        [F_CHG_TMR]             = REG_FIELD(0x07, 1, 2),
 184        [F_JEITA_ISET]          = REG_FIELD(0x07, 0, 0),
 185        /* REG08 */
 186        [F_BATCMP]              = REG_FIELD(0x08, 5, 7),
 187        [F_VCLAMP]              = REG_FIELD(0x08, 2, 4),
 188        [F_TREG]                = REG_FIELD(0x08, 0, 1),
 189        /* REG09 */
 190        [F_FORCE_ICO]           = REG_FIELD(0x09, 7, 7),
 191        [F_TMR2X_EN]            = REG_FIELD(0x09, 6, 6),
 192        [F_BATFET_DIS]          = REG_FIELD(0x09, 5, 5),
 193        [F_JEITA_VSET]          = REG_FIELD(0x09, 4, 4),
 194        [F_BATFET_DLY]          = REG_FIELD(0x09, 3, 3),
 195        [F_BATFET_RST_EN]       = REG_FIELD(0x09, 2, 2),
 196        [F_PUMPX_UP]            = REG_FIELD(0x09, 1, 1),
 197        [F_PUMPX_DN]            = REG_FIELD(0x09, 0, 0),
 198        /* REG0A */
 199        [F_BOOSTV]              = REG_FIELD(0x0A, 4, 7),
 200        /* PFM_OTG_DIS 3 on BQ25896 */
 201        [F_BOOSTI]              = REG_FIELD(0x0A, 0, 2),
 202        /* REG0B */
 203        [F_VBUS_STAT]           = REG_FIELD(0x0B, 5, 7),
 204        [F_CHG_STAT]            = REG_FIELD(0x0B, 3, 4),
 205        [F_PG_STAT]             = REG_FIELD(0x0B, 2, 2),
 206        [F_SDP_STAT]            = REG_FIELD(0x0B, 1, 1), // reserved on BQ25896
 207        [F_VSYS_STAT]           = REG_FIELD(0x0B, 0, 0),
 208        /* REG0C */
 209        [F_WD_FAULT]            = REG_FIELD(0x0C, 7, 7),
 210        [F_BOOST_FAULT]         = REG_FIELD(0x0C, 6, 6),
 211        [F_CHG_FAULT]           = REG_FIELD(0x0C, 4, 5),
 212        [F_BAT_FAULT]           = REG_FIELD(0x0C, 3, 3),
 213        [F_NTC_FAULT]           = REG_FIELD(0x0C, 0, 2),
 214        /* REG0D */
 215        [F_FORCE_VINDPM]        = REG_FIELD(0x0D, 7, 7),
 216        [F_VINDPM]              = REG_FIELD(0x0D, 0, 6),
 217        /* REG0E */
 218        [F_THERM_STAT]          = REG_FIELD(0x0E, 7, 7),
 219        [F_BATV]                = REG_FIELD(0x0E, 0, 6),
 220        /* REG0F */
 221        [F_SYSV]                = REG_FIELD(0x0F, 0, 6),
 222        /* REG10 */
 223        [F_TSPCT]               = REG_FIELD(0x10, 0, 6),
 224        /* REG11 */
 225        [F_VBUS_GD]             = REG_FIELD(0x11, 7, 7),
 226        [F_VBUSV]               = REG_FIELD(0x11, 0, 6),
 227        /* REG12 */
 228        [F_ICHGR]               = REG_FIELD(0x12, 0, 6),
 229        /* REG13 */
 230        [F_VDPM_STAT]           = REG_FIELD(0x13, 7, 7),
 231        [F_IDPM_STAT]           = REG_FIELD(0x13, 6, 6),
 232        [F_IDPM_LIM]            = REG_FIELD(0x13, 0, 5),
 233        /* REG14 */
 234        [F_REG_RST]             = REG_FIELD(0x14, 7, 7),
 235        [F_ICO_OPTIMIZED]       = REG_FIELD(0x14, 6, 6),
 236        [F_PN]                  = REG_FIELD(0x14, 3, 5),
 237        [F_TS_PROFILE]          = REG_FIELD(0x14, 2, 2),
 238        [F_DEV_REV]             = REG_FIELD(0x14, 0, 1)
 239};
 240
 241/*
 242 * Most of the val -> idx conversions can be computed, given the minimum,
 243 * maximum and the step between values. For the rest of conversions, we use
 244 * lookup tables.
 245 */
 246enum bq25890_table_ids {
 247        /* range tables */
 248        TBL_ICHG,
 249        TBL_ITERM,
 250        TBL_VREG,
 251        TBL_BOOSTV,
 252        TBL_SYSVMIN,
 253
 254        /* lookup tables */
 255        TBL_TREG,
 256        TBL_BOOSTI,
 257};
 258
 259/* Thermal Regulation Threshold lookup table, in degrees Celsius */
 260static const u32 bq25890_treg_tbl[] = { 60, 80, 100, 120 };
 261
 262#define BQ25890_TREG_TBL_SIZE           ARRAY_SIZE(bq25890_treg_tbl)
 263
 264/* Boost mode current limit lookup table, in uA */
 265static const u32 bq25890_boosti_tbl[] = {
 266        500000, 700000, 1100000, 1300000, 1600000, 1800000, 2100000, 2400000
 267};
 268
 269#define BQ25890_BOOSTI_TBL_SIZE         ARRAY_SIZE(bq25890_boosti_tbl)
 270
 271struct bq25890_range {
 272        u32 min;
 273        u32 max;
 274        u32 step;
 275};
 276
 277struct bq25890_lookup {
 278        const u32 *tbl;
 279        u32 size;
 280};
 281
 282static const union {
 283        struct bq25890_range  rt;
 284        struct bq25890_lookup lt;
 285} bq25890_tables[] = {
 286        /* range tables */
 287        [TBL_ICHG] =    { .rt = {0,       5056000, 64000} },     /* uA */
 288        [TBL_ITERM] =   { .rt = {64000,   1024000, 64000} },     /* uA */
 289        [TBL_VREG] =    { .rt = {3840000, 4608000, 16000} },     /* uV */
 290        [TBL_BOOSTV] =  { .rt = {4550000, 5510000, 64000} },     /* uV */
 291        [TBL_SYSVMIN] = { .rt = {3000000, 3700000, 100000} },    /* uV */
 292
 293        /* lookup tables */
 294        [TBL_TREG] =    { .lt = {bq25890_treg_tbl, BQ25890_TREG_TBL_SIZE} },
 295        [TBL_BOOSTI] =  { .lt = {bq25890_boosti_tbl, BQ25890_BOOSTI_TBL_SIZE} }
 296};
 297
 298static int bq25890_field_read(struct bq25890_device *bq,
 299                              enum bq25890_fields field_id)
 300{
 301        int ret;
 302        int val;
 303
 304        ret = regmap_field_read(bq->rmap_fields[field_id], &val);
 305        if (ret < 0)
 306                return ret;
 307
 308        return val;
 309}
 310
 311static int bq25890_field_write(struct bq25890_device *bq,
 312                               enum bq25890_fields field_id, u8 val)
 313{
 314        return regmap_field_write(bq->rmap_fields[field_id], val);
 315}
 316
 317static u8 bq25890_find_idx(u32 value, enum bq25890_table_ids id)
 318{
 319        u8 idx;
 320
 321        if (id >= TBL_TREG) {
 322                const u32 *tbl = bq25890_tables[id].lt.tbl;
 323                u32 tbl_size = bq25890_tables[id].lt.size;
 324
 325                for (idx = 1; idx < tbl_size && tbl[idx] <= value; idx++)
 326                        ;
 327        } else {
 328                const struct bq25890_range *rtbl = &bq25890_tables[id].rt;
 329                u8 rtbl_size;
 330
 331                rtbl_size = (rtbl->max - rtbl->min) / rtbl->step + 1;
 332
 333                for (idx = 1;
 334                     idx < rtbl_size && (idx * rtbl->step + rtbl->min <= value);
 335                     idx++)
 336                        ;
 337        }
 338
 339        return idx - 1;
 340}
 341
 342static u32 bq25890_find_val(u8 idx, enum bq25890_table_ids id)
 343{
 344        const struct bq25890_range *rtbl;
 345
 346        /* lookup table? */
 347        if (id >= TBL_TREG)
 348                return bq25890_tables[id].lt.tbl[idx];
 349
 350        /* range table */
 351        rtbl = &bq25890_tables[id].rt;
 352
 353        return (rtbl->min + idx * rtbl->step);
 354}
 355
 356enum bq25890_status {
 357        STATUS_NOT_CHARGING,
 358        STATUS_PRE_CHARGING,
 359        STATUS_FAST_CHARGING,
 360        STATUS_TERMINATION_DONE,
 361};
 362
 363enum bq25890_chrg_fault {
 364        CHRG_FAULT_NORMAL,
 365        CHRG_FAULT_INPUT,
 366        CHRG_FAULT_THERMAL_SHUTDOWN,
 367        CHRG_FAULT_TIMER_EXPIRED,
 368};
 369
 370static int bq25890_power_supply_get_property(struct power_supply *psy,
 371                                             enum power_supply_property psp,
 372                                             union power_supply_propval *val)
 373{
 374        int ret;
 375        struct bq25890_device *bq = power_supply_get_drvdata(psy);
 376        struct bq25890_state state;
 377
 378        mutex_lock(&bq->lock);
 379        state = bq->state;
 380        mutex_unlock(&bq->lock);
 381
 382        switch (psp) {
 383        case POWER_SUPPLY_PROP_STATUS:
 384                if (!state.online)
 385                        val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
 386                else if (state.chrg_status == STATUS_NOT_CHARGING)
 387                        val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 388                else if (state.chrg_status == STATUS_PRE_CHARGING ||
 389                         state.chrg_status == STATUS_FAST_CHARGING)
 390                        val->intval = POWER_SUPPLY_STATUS_CHARGING;
 391                else if (state.chrg_status == STATUS_TERMINATION_DONE)
 392                        val->intval = POWER_SUPPLY_STATUS_FULL;
 393                else
 394                        val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
 395
 396                break;
 397
 398        case POWER_SUPPLY_PROP_MANUFACTURER:
 399                val->strval = BQ25890_MANUFACTURER;
 400                break;
 401
 402        case POWER_SUPPLY_PROP_MODEL_NAME:
 403                if (bq->chip_id == BQ25890_ID)
 404                        val->strval = "BQ25890";
 405                else if (bq->chip_id == BQ25896_ID)
 406                        val->strval = "BQ25896";
 407                else
 408                        val->strval = "UNKNOWN";
 409
 410                break;
 411
 412        case POWER_SUPPLY_PROP_ONLINE:
 413                val->intval = state.online;
 414                break;
 415
 416        case POWER_SUPPLY_PROP_HEALTH:
 417                if (!state.chrg_fault && !state.bat_fault && !state.boost_fault)
 418                        val->intval = POWER_SUPPLY_HEALTH_GOOD;
 419                else if (state.bat_fault)
 420                        val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
 421                else if (state.chrg_fault == CHRG_FAULT_TIMER_EXPIRED)
 422                        val->intval = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
 423                else if (state.chrg_fault == CHRG_FAULT_THERMAL_SHUTDOWN)
 424                        val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
 425                else
 426                        val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
 427                break;
 428
 429        case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
 430                ret = bq25890_field_read(bq, F_ICHGR); /* read measured value */
 431                if (ret < 0)
 432                        return ret;
 433
 434                /* converted_val = ADC_val * 50mA (table 10.3.19) */
 435                val->intval = ret * 50000;
 436                break;
 437
 438        case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
 439                val->intval = bq25890_find_val(bq->init_data.ichg, TBL_ICHG);
 440                break;
 441
 442        case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
 443                if (!state.online) {
 444                        val->intval = 0;
 445                        break;
 446                }
 447
 448                ret = bq25890_field_read(bq, F_BATV); /* read measured value */
 449                if (ret < 0)
 450                        return ret;
 451
 452                /* converted_val = 2.304V + ADC_val * 20mV (table 10.3.15) */
 453                val->intval = 2304000 + ret * 20000;
 454                break;
 455
 456        case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
 457                val->intval = bq25890_find_val(bq->init_data.vreg, TBL_VREG);
 458                break;
 459
 460        case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
 461                val->intval = bq25890_find_val(bq->init_data.iterm, TBL_ITERM);
 462                break;
 463
 464        case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 465                ret = bq25890_field_read(bq, F_SYSV); /* read measured value */
 466                if (ret < 0)
 467                        return ret;
 468
 469                /* converted_val = 2.304V + ADC_val * 20mV (table 10.3.15) */
 470                val->intval = 2304000 + ret * 20000;
 471                break;
 472
 473        default:
 474                return -EINVAL;
 475        }
 476
 477        return 0;
 478}
 479
 480static int bq25890_get_chip_state(struct bq25890_device *bq,
 481                                  struct bq25890_state *state)
 482{
 483        int i, ret;
 484
 485        struct {
 486                enum bq25890_fields id;
 487                u8 *data;
 488        } state_fields[] = {
 489                {F_CHG_STAT,    &state->chrg_status},
 490                {F_PG_STAT,     &state->online},
 491                {F_VSYS_STAT,   &state->vsys_status},
 492                {F_BOOST_FAULT, &state->boost_fault},
 493                {F_BAT_FAULT,   &state->bat_fault},
 494                {F_CHG_FAULT,   &state->chrg_fault}
 495        };
 496
 497        for (i = 0; i < ARRAY_SIZE(state_fields); i++) {
 498                ret = bq25890_field_read(bq, state_fields[i].id);
 499                if (ret < 0)
 500                        return ret;
 501
 502                *state_fields[i].data = ret;
 503        }
 504
 505        dev_dbg(bq->dev, "S:CHG/PG/VSYS=%d/%d/%d, F:CHG/BOOST/BAT=%d/%d/%d\n",
 506                state->chrg_status, state->online, state->vsys_status,
 507                state->chrg_fault, state->boost_fault, state->bat_fault);
 508
 509        return 0;
 510}
 511
 512static bool bq25890_state_changed(struct bq25890_device *bq,
 513                                  struct bq25890_state *new_state)
 514{
 515        struct bq25890_state old_state;
 516
 517        mutex_lock(&bq->lock);
 518        old_state = bq->state;
 519        mutex_unlock(&bq->lock);
 520
 521        return (old_state.chrg_status != new_state->chrg_status ||
 522                old_state.chrg_fault != new_state->chrg_fault   ||
 523                old_state.online != new_state->online           ||
 524                old_state.bat_fault != new_state->bat_fault     ||
 525                old_state.boost_fault != new_state->boost_fault ||
 526                old_state.vsys_status != new_state->vsys_status);
 527}
 528
 529static void bq25890_handle_state_change(struct bq25890_device *bq,
 530                                        struct bq25890_state *new_state)
 531{
 532        int ret;
 533        struct bq25890_state old_state;
 534
 535        mutex_lock(&bq->lock);
 536        old_state = bq->state;
 537        mutex_unlock(&bq->lock);
 538
 539        if (!new_state->online) {                            /* power removed */
 540                /* disable ADC */
 541                ret = bq25890_field_write(bq, F_CONV_START, 0);
 542                if (ret < 0)
 543                        goto error;
 544        } else if (!old_state.online) {                     /* power inserted */
 545                /* enable ADC, to have control of charge current/voltage */
 546                ret = bq25890_field_write(bq, F_CONV_START, 1);
 547                if (ret < 0)
 548                        goto error;
 549        }
 550
 551        return;
 552
 553error:
 554        dev_err(bq->dev, "Error communicating with the chip.\n");
 555}
 556
 557static irqreturn_t bq25890_irq_handler_thread(int irq, void *private)
 558{
 559        struct bq25890_device *bq = private;
 560        int ret;
 561        struct bq25890_state state;
 562
 563        ret = bq25890_get_chip_state(bq, &state);
 564        if (ret < 0)
 565                goto handled;
 566
 567        if (!bq25890_state_changed(bq, &state))
 568                goto handled;
 569
 570        bq25890_handle_state_change(bq, &state);
 571
 572        mutex_lock(&bq->lock);
 573        bq->state = state;
 574        mutex_unlock(&bq->lock);
 575
 576        power_supply_changed(bq->charger);
 577
 578handled:
 579        return IRQ_HANDLED;
 580}
 581
 582static int bq25890_chip_reset(struct bq25890_device *bq)
 583{
 584        int ret;
 585        int rst_check_counter = 10;
 586
 587        ret = bq25890_field_write(bq, F_REG_RST, 1);
 588        if (ret < 0)
 589                return ret;
 590
 591        do {
 592                ret = bq25890_field_read(bq, F_REG_RST);
 593                if (ret < 0)
 594                        return ret;
 595
 596                usleep_range(5, 10);
 597        } while (ret == 1 && --rst_check_counter);
 598
 599        if (!rst_check_counter)
 600                return -ETIMEDOUT;
 601
 602        return 0;
 603}
 604
 605static int bq25890_hw_init(struct bq25890_device *bq)
 606{
 607        int ret;
 608        int i;
 609        struct bq25890_state state;
 610
 611        const struct {
 612                enum bq25890_fields id;
 613                u32 value;
 614        } init_data[] = {
 615                {F_ICHG,         bq->init_data.ichg},
 616                {F_VREG,         bq->init_data.vreg},
 617                {F_ITERM,        bq->init_data.iterm},
 618                {F_IPRECHG,      bq->init_data.iprechg},
 619                {F_SYSVMIN,      bq->init_data.sysvmin},
 620                {F_BOOSTV,       bq->init_data.boostv},
 621                {F_BOOSTI,       bq->init_data.boosti},
 622                {F_BOOSTF,       bq->init_data.boostf},
 623                {F_EN_ILIM,      bq->init_data.ilim_en},
 624                {F_TREG,         bq->init_data.treg}
 625        };
 626
 627        ret = bq25890_chip_reset(bq);
 628        if (ret < 0) {
 629                dev_dbg(bq->dev, "Reset failed %d\n", ret);
 630                return ret;
 631        }
 632
 633        /* disable watchdog */
 634        ret = bq25890_field_write(bq, F_WD, 0);
 635        if (ret < 0) {
 636                dev_dbg(bq->dev, "Disabling watchdog failed %d\n", ret);
 637                return ret;
 638        }
 639
 640        /* initialize currents/voltages and other parameters */
 641        for (i = 0; i < ARRAY_SIZE(init_data); i++) {
 642                ret = bq25890_field_write(bq, init_data[i].id,
 643                                          init_data[i].value);
 644                if (ret < 0) {
 645                        dev_dbg(bq->dev, "Writing init data failed %d\n", ret);
 646                        return ret;
 647                }
 648        }
 649
 650        /* Configure ADC for continuous conversions. This does not enable it. */
 651        ret = bq25890_field_write(bq, F_CONV_RATE, 1);
 652        if (ret < 0) {
 653                dev_dbg(bq->dev, "Config ADC failed %d\n", ret);
 654                return ret;
 655        }
 656
 657        ret = bq25890_get_chip_state(bq, &state);
 658        if (ret < 0) {
 659                dev_dbg(bq->dev, "Get state failed %d\n", ret);
 660                return ret;
 661        }
 662
 663        mutex_lock(&bq->lock);
 664        bq->state = state;
 665        mutex_unlock(&bq->lock);
 666
 667        return 0;
 668}
 669
 670static enum power_supply_property bq25890_power_supply_props[] = {
 671        POWER_SUPPLY_PROP_MANUFACTURER,
 672        POWER_SUPPLY_PROP_MODEL_NAME,
 673        POWER_SUPPLY_PROP_STATUS,
 674        POWER_SUPPLY_PROP_ONLINE,
 675        POWER_SUPPLY_PROP_HEALTH,
 676        POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
 677        POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
 678        POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
 679        POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
 680        POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
 681        POWER_SUPPLY_PROP_VOLTAGE_NOW,
 682};
 683
 684static char *bq25890_charger_supplied_to[] = {
 685        "main-battery",
 686};
 687
 688static const struct power_supply_desc bq25890_power_supply_desc = {
 689        .name = "bq25890-charger",
 690        .type = POWER_SUPPLY_TYPE_USB,
 691        .properties = bq25890_power_supply_props,
 692        .num_properties = ARRAY_SIZE(bq25890_power_supply_props),
 693        .get_property = bq25890_power_supply_get_property,
 694};
 695
 696static int bq25890_power_supply_init(struct bq25890_device *bq)
 697{
 698        struct power_supply_config psy_cfg = { .drv_data = bq, };
 699
 700        psy_cfg.supplied_to = bq25890_charger_supplied_to;
 701        psy_cfg.num_supplicants = ARRAY_SIZE(bq25890_charger_supplied_to);
 702
 703        bq->charger = power_supply_register(bq->dev, &bq25890_power_supply_desc,
 704                                            &psy_cfg);
 705
 706        return PTR_ERR_OR_ZERO(bq->charger);
 707}
 708
 709static void bq25890_usb_work(struct work_struct *data)
 710{
 711        int ret;
 712        struct bq25890_device *bq =
 713                        container_of(data, struct bq25890_device, usb_work);
 714
 715        switch (bq->usb_event) {
 716        case USB_EVENT_ID:
 717                /* Enable boost mode */
 718                ret = bq25890_field_write(bq, F_OTG_CFG, 1);
 719                if (ret < 0)
 720                        goto error;
 721                break;
 722
 723        case USB_EVENT_NONE:
 724                /* Disable boost mode */
 725                ret = bq25890_field_write(bq, F_OTG_CFG, 0);
 726                if (ret < 0)
 727                        goto error;
 728
 729                power_supply_changed(bq->charger);
 730                break;
 731        }
 732
 733        return;
 734
 735error:
 736        dev_err(bq->dev, "Error switching to boost/charger mode.\n");
 737}
 738
 739static int bq25890_usb_notifier(struct notifier_block *nb, unsigned long val,
 740                                void *priv)
 741{
 742        struct bq25890_device *bq =
 743                        container_of(nb, struct bq25890_device, usb_nb);
 744
 745        bq->usb_event = val;
 746        queue_work(system_power_efficient_wq, &bq->usb_work);
 747
 748        return NOTIFY_OK;
 749}
 750
 751static int bq25890_irq_probe(struct bq25890_device *bq)
 752{
 753        struct gpio_desc *irq;
 754
 755        irq = devm_gpiod_get(bq->dev, BQ25890_IRQ_PIN, GPIOD_IN);
 756        if (IS_ERR(irq)) {
 757                dev_err(bq->dev, "Could not probe irq pin.\n");
 758                return PTR_ERR(irq);
 759        }
 760
 761        return gpiod_to_irq(irq);
 762}
 763
 764static int bq25890_fw_read_u32_props(struct bq25890_device *bq)
 765{
 766        int ret;
 767        u32 property;
 768        int i;
 769        struct bq25890_init_data *init = &bq->init_data;
 770        struct {
 771                char *name;
 772                bool optional;
 773                enum bq25890_table_ids tbl_id;
 774                u8 *conv_data; /* holds converted value from given property */
 775        } props[] = {
 776                /* required properties */
 777                {"ti,charge-current", false, TBL_ICHG, &init->ichg},
 778                {"ti,battery-regulation-voltage", false, TBL_VREG, &init->vreg},
 779                {"ti,termination-current", false, TBL_ITERM, &init->iterm},
 780                {"ti,precharge-current", false, TBL_ITERM, &init->iprechg},
 781                {"ti,minimum-sys-voltage", false, TBL_SYSVMIN, &init->sysvmin},
 782                {"ti,boost-voltage", false, TBL_BOOSTV, &init->boostv},
 783                {"ti,boost-max-current", false, TBL_BOOSTI, &init->boosti},
 784
 785                /* optional properties */
 786                {"ti,thermal-regulation-threshold", true, TBL_TREG, &init->treg}
 787        };
 788
 789        /* initialize data for optional properties */
 790        init->treg = 3; /* 120 degrees Celsius */
 791
 792        for (i = 0; i < ARRAY_SIZE(props); i++) {
 793                ret = device_property_read_u32(bq->dev, props[i].name,
 794                                               &property);
 795                if (ret < 0) {
 796                        if (props[i].optional)
 797                                continue;
 798
 799                        dev_err(bq->dev, "Unable to read property %d %s\n", ret,
 800                                props[i].name);
 801
 802                        return ret;
 803                }
 804
 805                *props[i].conv_data = bq25890_find_idx(property,
 806                                                       props[i].tbl_id);
 807        }
 808
 809        return 0;
 810}
 811
 812static int bq25890_fw_probe(struct bq25890_device *bq)
 813{
 814        int ret;
 815        struct bq25890_init_data *init = &bq->init_data;
 816
 817        ret = bq25890_fw_read_u32_props(bq);
 818        if (ret < 0)
 819                return ret;
 820
 821        init->ilim_en = device_property_read_bool(bq->dev, "ti,use-ilim-pin");
 822        init->boostf = device_property_read_bool(bq->dev, "ti,boost-low-freq");
 823
 824        return 0;
 825}
 826
 827static int bq25890_probe(struct i2c_client *client,
 828                         const struct i2c_device_id *id)
 829{
 830        struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
 831        struct device *dev = &client->dev;
 832        struct bq25890_device *bq;
 833        int ret;
 834        int i;
 835
 836        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 837                dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
 838                return -ENODEV;
 839        }
 840
 841        bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL);
 842        if (!bq)
 843                return -ENOMEM;
 844
 845        bq->client = client;
 846        bq->dev = dev;
 847
 848        mutex_init(&bq->lock);
 849
 850        bq->rmap = devm_regmap_init_i2c(client, &bq25890_regmap_config);
 851        if (IS_ERR(bq->rmap)) {
 852                dev_err(dev, "failed to allocate register map\n");
 853                return PTR_ERR(bq->rmap);
 854        }
 855
 856        for (i = 0; i < ARRAY_SIZE(bq25890_reg_fields); i++) {
 857                const struct reg_field *reg_fields = bq25890_reg_fields;
 858
 859                bq->rmap_fields[i] = devm_regmap_field_alloc(dev, bq->rmap,
 860                                                             reg_fields[i]);
 861                if (IS_ERR(bq->rmap_fields[i])) {
 862                        dev_err(dev, "cannot allocate regmap field\n");
 863                        return PTR_ERR(bq->rmap_fields[i]);
 864                }
 865        }
 866
 867        i2c_set_clientdata(client, bq);
 868
 869        bq->chip_id = bq25890_field_read(bq, F_PN);
 870        if (bq->chip_id < 0) {
 871                dev_err(dev, "Cannot read chip ID.\n");
 872                return bq->chip_id;
 873        }
 874
 875        if ((bq->chip_id != BQ25890_ID) && (bq->chip_id != BQ25896_ID)) {
 876                dev_err(dev, "Chip with ID=%d, not supported!\n", bq->chip_id);
 877                return -ENODEV;
 878        }
 879
 880        if (!dev->platform_data) {
 881                ret = bq25890_fw_probe(bq);
 882                if (ret < 0) {
 883                        dev_err(dev, "Cannot read device properties.\n");
 884                        return ret;
 885                }
 886        } else {
 887                return -ENODEV;
 888        }
 889
 890        ret = bq25890_hw_init(bq);
 891        if (ret < 0) {
 892                dev_err(dev, "Cannot initialize the chip.\n");
 893                return ret;
 894        }
 895
 896        if (client->irq <= 0)
 897                client->irq = bq25890_irq_probe(bq);
 898
 899        if (client->irq < 0) {
 900                dev_err(dev, "No irq resource found.\n");
 901                return client->irq;
 902        }
 903
 904        /* OTG reporting */
 905        bq->usb_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
 906        if (!IS_ERR_OR_NULL(bq->usb_phy)) {
 907                INIT_WORK(&bq->usb_work, bq25890_usb_work);
 908                bq->usb_nb.notifier_call = bq25890_usb_notifier;
 909                usb_register_notifier(bq->usb_phy, &bq->usb_nb);
 910        }
 911
 912        ret = devm_request_threaded_irq(dev, client->irq, NULL,
 913                                        bq25890_irq_handler_thread,
 914                                        IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 915                                        BQ25890_IRQ_PIN, bq);
 916        if (ret)
 917                goto irq_fail;
 918
 919        ret = bq25890_power_supply_init(bq);
 920        if (ret < 0) {
 921                dev_err(dev, "Failed to register power supply\n");
 922                goto irq_fail;
 923        }
 924
 925        return 0;
 926
 927irq_fail:
 928        if (!IS_ERR_OR_NULL(bq->usb_phy))
 929                usb_unregister_notifier(bq->usb_phy, &bq->usb_nb);
 930
 931        return ret;
 932}
 933
 934static int bq25890_remove(struct i2c_client *client)
 935{
 936        struct bq25890_device *bq = i2c_get_clientdata(client);
 937
 938        power_supply_unregister(bq->charger);
 939
 940        if (!IS_ERR_OR_NULL(bq->usb_phy))
 941                usb_unregister_notifier(bq->usb_phy, &bq->usb_nb);
 942
 943        /* reset all registers to default values */
 944        bq25890_chip_reset(bq);
 945
 946        return 0;
 947}
 948
 949#ifdef CONFIG_PM_SLEEP
 950static int bq25890_suspend(struct device *dev)
 951{
 952        struct bq25890_device *bq = dev_get_drvdata(dev);
 953
 954        /*
 955         * If charger is removed, while in suspend, make sure ADC is diabled
 956         * since it consumes slightly more power.
 957         */
 958        return bq25890_field_write(bq, F_CONV_START, 0);
 959}
 960
 961static int bq25890_resume(struct device *dev)
 962{
 963        int ret;
 964        struct bq25890_state state;
 965        struct bq25890_device *bq = dev_get_drvdata(dev);
 966
 967        ret = bq25890_get_chip_state(bq, &state);
 968        if (ret < 0)
 969                return ret;
 970
 971        mutex_lock(&bq->lock);
 972        bq->state = state;
 973        mutex_unlock(&bq->lock);
 974
 975        /* Re-enable ADC only if charger is plugged in. */
 976        if (state.online) {
 977                ret = bq25890_field_write(bq, F_CONV_START, 1);
 978                if (ret < 0)
 979                        return ret;
 980        }
 981
 982        /* signal userspace, maybe state changed while suspended */
 983        power_supply_changed(bq->charger);
 984
 985        return 0;
 986}
 987#endif
 988
 989static const struct dev_pm_ops bq25890_pm = {
 990        SET_SYSTEM_SLEEP_PM_OPS(bq25890_suspend, bq25890_resume)
 991};
 992
 993static const struct i2c_device_id bq25890_i2c_ids[] = {
 994        { "bq25890", 0 },
 995        {},
 996};
 997MODULE_DEVICE_TABLE(i2c, bq25890_i2c_ids);
 998
 999static const struct of_device_id bq25890_of_match[] = {
1000        { .compatible = "ti,bq25890", },
1001        { },
1002};
1003MODULE_DEVICE_TABLE(of, bq25890_of_match);
1004
1005static const struct acpi_device_id bq25890_acpi_match[] = {
1006        {"BQ258900", 0},
1007        {},
1008};
1009MODULE_DEVICE_TABLE(acpi, bq25890_acpi_match);
1010
1011static struct i2c_driver bq25890_driver = {
1012        .driver = {
1013                .name = "bq25890-charger",
1014                .of_match_table = of_match_ptr(bq25890_of_match),
1015                .acpi_match_table = ACPI_PTR(bq25890_acpi_match),
1016                .pm = &bq25890_pm,
1017        },
1018        .probe = bq25890_probe,
1019        .remove = bq25890_remove,
1020        .id_table = bq25890_i2c_ids,
1021};
1022module_i2c_driver(bq25890_driver);
1023
1024MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>");
1025MODULE_DESCRIPTION("bq25890 charger driver");
1026MODULE_LICENSE("GPL");
1027