linux/drivers/staging/media/zoran/zoran_device.c
<<
>>
Prefs
   1/*
   2 * Zoran zr36057/zr36067 PCI controller driver, for the
   3 * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux
   4 * Media Labs LML33/LML33R10.
   5 *
   6 * This part handles device access (PCI/I2C/codec/...)
   7 *
   8 * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
   9 *
  10 * Currently maintained by:
  11 *   Ronald Bultje    <rbultje@ronald.bitfreak.net>
  12 *   Laurent Pinchart <laurent.pinchart@skynet.be>
  13 *   Mailinglist      <mjpeg-users@lists.sf.net>
  14 *
  15 * This program is free software; you can redistribute it and/or modify
  16 * it under the terms of the GNU General Public License as published by
  17 * the Free Software Foundation; either version 2 of the License, or
  18 * (at your option) any later version.
  19 *
  20 * This program is distributed in the hope that it will be useful,
  21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23 * GNU General Public License for more details.
  24 */
  25
  26#include <linux/types.h>
  27#include <linux/kernel.h>
  28#include <linux/module.h>
  29#include <linux/vmalloc.h>
  30#include <linux/ktime.h>
  31#include <linux/sched/signal.h>
  32
  33#include <linux/interrupt.h>
  34#include <linux/proc_fs.h>
  35#include <linux/i2c.h>
  36#include <linux/i2c-algo-bit.h>
  37#include <linux/videodev2.h>
  38#include <media/v4l2-common.h>
  39#include <linux/spinlock.h>
  40#include <linux/sem.h>
  41
  42#include <linux/pci.h>
  43#include <linux/delay.h>
  44#include <linux/wait.h>
  45
  46#include <asm/byteorder.h>
  47#include <asm/io.h>
  48
  49#include "videocodec.h"
  50#include "zoran.h"
  51#include "zoran_device.h"
  52#include "zoran_card.h"
  53
  54#define IRQ_MASK ( ZR36057_ISR_GIRQ0 | \
  55                   ZR36057_ISR_GIRQ1 | \
  56                   ZR36057_ISR_JPEGRepIRQ )
  57
  58static bool lml33dpath;         /* default = 0
  59                                 * 1 will use digital path in capture
  60                                 * mode instead of analog. It can be
  61                                 * used for picture adjustments using
  62                                 * tool like xawtv while watching image
  63                                 * on TV monitor connected to the output.
  64                                 * However, due to absence of 75 Ohm
  65                                 * load on Bt819 input, there will be
  66                                 * some image imperfections */
  67
  68module_param(lml33dpath, bool, 0644);
  69MODULE_PARM_DESC(lml33dpath,
  70                 "Use digital path capture mode (on LML33 cards)");
  71
  72static void
  73zr36057_init_vfe (struct zoran *zr);
  74
  75/*
  76 * General Purpose I/O and Guest bus access
  77 */
  78
  79/*
  80 * This is a bit tricky. When a board lacks a GPIO function, the corresponding
  81 * GPIO bit number in the card_info structure is set to 0.
  82 */
  83
  84void
  85GPIO (struct zoran *zr,
  86      int           bit,
  87      unsigned int  value)
  88{
  89        u32 reg;
  90        u32 mask;
  91
  92        /* Make sure the bit number is legal
  93         * A bit number of -1 (lacking) gives a mask of 0,
  94         * making it harmless */
  95        mask = (1 << (24 + bit)) & 0xff000000;
  96        reg = btread(ZR36057_GPPGCR1) & ~mask;
  97        if (value) {
  98                reg |= mask;
  99        }
 100        btwrite(reg, ZR36057_GPPGCR1);
 101        udelay(1);
 102}
 103
 104/*
 105 * Wait til post office is no longer busy
 106 */
 107
 108int
 109post_office_wait (struct zoran *zr)
 110{
 111        u32 por;
 112
 113//      while (((por = btread(ZR36057_POR)) & (ZR36057_POR_POPen | ZR36057_POR_POTime)) == ZR36057_POR_POPen) {
 114        while ((por = btread(ZR36057_POR)) & ZR36057_POR_POPen) {
 115                /* wait for something to happen */
 116        }
 117        if ((por & ZR36057_POR_POTime) && !zr->card.gws_not_connected) {
 118                /* In LML33/BUZ \GWS line is not connected, so it has always timeout set */
 119                dprintk(1, KERN_INFO "%s: pop timeout %08x\n", ZR_DEVNAME(zr),
 120                        por);
 121                return -1;
 122        }
 123
 124        return 0;
 125}
 126
 127int
 128post_office_write (struct zoran *zr,
 129                   unsigned int  guest,
 130                   unsigned int  reg,
 131                   unsigned int  value)
 132{
 133        u32 por;
 134
 135        por =
 136            ZR36057_POR_PODir | ZR36057_POR_POTime | ((guest & 7) << 20) |
 137            ((reg & 7) << 16) | (value & 0xFF);
 138        btwrite(por, ZR36057_POR);
 139
 140        return post_office_wait(zr);
 141}
 142
 143int
 144post_office_read (struct zoran *zr,
 145                  unsigned int  guest,
 146                  unsigned int  reg)
 147{
 148        u32 por;
 149
 150        por = ZR36057_POR_POTime | ((guest & 7) << 20) | ((reg & 7) << 16);
 151        btwrite(por, ZR36057_POR);
 152        if (post_office_wait(zr) < 0) {
 153                return -1;
 154        }
 155
 156        return btread(ZR36057_POR) & 0xFF;
 157}
 158
 159/*
 160 * detect guests
 161 */
 162
 163static void
 164dump_guests (struct zoran *zr)
 165{
 166        if (zr36067_debug > 2) {
 167                int i, guest[8];
 168
 169                for (i = 1; i < 8; i++) {       // Don't read jpeg codec here
 170                        guest[i] = post_office_read(zr, i, 0);
 171                }
 172
 173                printk(KERN_INFO "%s: Guests: %*ph\n",
 174                       ZR_DEVNAME(zr), 8, guest);
 175        }
 176}
 177
 178void
 179detect_guest_activity (struct zoran *zr)
 180{
 181        int timeout, i, j, res, guest[8], guest0[8], change[8][3];
 182        ktime_t t0, t1;
 183
 184        dump_guests(zr);
 185        printk(KERN_INFO "%s: Detecting guests activity, please wait...\n",
 186               ZR_DEVNAME(zr));
 187        for (i = 1; i < 8; i++) {       // Don't read jpeg codec here
 188                guest0[i] = guest[i] = post_office_read(zr, i, 0);
 189        }
 190
 191        timeout = 0;
 192        j = 0;
 193        t0 = ktime_get();
 194        while (timeout < 10000) {
 195                udelay(10);
 196                timeout++;
 197                for (i = 1; (i < 8) && (j < 8); i++) {
 198                        res = post_office_read(zr, i, 0);
 199                        if (res != guest[i]) {
 200                                t1 = ktime_get();
 201                                change[j][0] = ktime_to_us(ktime_sub(t1, t0));
 202                                t0 = t1;
 203                                change[j][1] = i;
 204                                change[j][2] = res;
 205                                j++;
 206                                guest[i] = res;
 207                        }
 208                }
 209                if (j >= 8)
 210                        break;
 211        }
 212
 213        printk(KERN_INFO "%s: Guests: %*ph\n", ZR_DEVNAME(zr), 8, guest0);
 214
 215        if (j == 0) {
 216                printk(KERN_INFO "%s: No activity detected.\n", ZR_DEVNAME(zr));
 217                return;
 218        }
 219        for (i = 0; i < j; i++) {
 220                printk(KERN_INFO "%s: %6d: %d => 0x%02x\n", ZR_DEVNAME(zr),
 221                       change[i][0], change[i][1], change[i][2]);
 222        }
 223}
 224
 225/*
 226 * JPEG Codec access
 227 */
 228
 229void
 230jpeg_codec_sleep (struct zoran *zr,
 231                  int           sleep)
 232{
 233        GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_SLEEP], !sleep);
 234        if (!sleep) {
 235                dprintk(3,
 236                        KERN_DEBUG
 237                        "%s: jpeg_codec_sleep() - wake GPIO=0x%08x\n",
 238                        ZR_DEVNAME(zr), btread(ZR36057_GPPGCR1));
 239                udelay(500);
 240        } else {
 241                dprintk(3,
 242                        KERN_DEBUG
 243                        "%s: jpeg_codec_sleep() - sleep GPIO=0x%08x\n",
 244                        ZR_DEVNAME(zr), btread(ZR36057_GPPGCR1));
 245                udelay(2);
 246        }
 247}
 248
 249int
 250jpeg_codec_reset (struct zoran *zr)
 251{
 252        /* Take the codec out of sleep */
 253        jpeg_codec_sleep(zr, 0);
 254
 255        if (zr->card.gpcs[GPCS_JPEG_RESET] != 0xff) {
 256                post_office_write(zr, zr->card.gpcs[GPCS_JPEG_RESET], 0,
 257                                  0);
 258                udelay(2);
 259        } else {
 260                GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_RESET], 0);
 261                udelay(2);
 262                GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_RESET], 1);
 263                udelay(2);
 264        }
 265
 266        return 0;
 267}
 268
 269/*
 270 *   Set the registers for the size we have specified. Don't bother
 271 *   trying to understand this without the ZR36057 manual in front of
 272 *   you [AC].
 273 *
 274 *   PS: The manual is free for download in .pdf format from
 275 *   www.zoran.com - nicely done those folks.
 276 */
 277
 278static void
 279zr36057_adjust_vfe (struct zoran          *zr,
 280                    enum zoran_codec_mode  mode)
 281{
 282        u32 reg;
 283
 284        switch (mode) {
 285        case BUZ_MODE_MOTION_DECOMPRESS:
 286                btand(~ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR);
 287                reg = btread(ZR36057_VFEHCR);
 288                if ((reg & (1 << 10)) && zr->card.type != LML33R10) {
 289                        reg += ((1 << 10) | 1);
 290                }
 291                btwrite(reg, ZR36057_VFEHCR);
 292                break;
 293        case BUZ_MODE_MOTION_COMPRESS:
 294        case BUZ_MODE_IDLE:
 295        default:
 296                if ((zr->norm & V4L2_STD_NTSC) ||
 297                    (zr->card.type == LML33R10 &&
 298                     (zr->norm & V4L2_STD_PAL)))
 299                        btand(~ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR);
 300                else
 301                        btor(ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR);
 302                reg = btread(ZR36057_VFEHCR);
 303                if (!(reg & (1 << 10)) && zr->card.type != LML33R10) {
 304                        reg -= ((1 << 10) | 1);
 305                }
 306                btwrite(reg, ZR36057_VFEHCR);
 307                break;
 308        }
 309}
 310
 311/*
 312 * set geometry
 313 */
 314
 315static void
 316zr36057_set_vfe (struct zoran              *zr,
 317                 int                        video_width,
 318                 int                        video_height,
 319                 const struct zoran_format *format)
 320{
 321        struct tvnorm *tvn;
 322        unsigned HStart, HEnd, VStart, VEnd;
 323        unsigned DispMode;
 324        unsigned VidWinWid, VidWinHt;
 325        unsigned hcrop1, hcrop2, vcrop1, vcrop2;
 326        unsigned Wa, We, Ha, He;
 327        unsigned X, Y, HorDcm, VerDcm;
 328        u32 reg;
 329        unsigned mask_line_size;
 330
 331        tvn = zr->timing;
 332
 333        Wa = tvn->Wa;
 334        Ha = tvn->Ha;
 335
 336        dprintk(2, KERN_INFO "%s: set_vfe() - width = %d, height = %d\n",
 337                ZR_DEVNAME(zr), video_width, video_height);
 338
 339        if (video_width < BUZ_MIN_WIDTH ||
 340            video_height < BUZ_MIN_HEIGHT ||
 341            video_width > Wa || video_height > Ha) {
 342                dprintk(1, KERN_ERR "%s: set_vfe: w=%d h=%d not valid\n",
 343                        ZR_DEVNAME(zr), video_width, video_height);
 344                return;
 345        }
 346
 347        /**** zr36057 ****/
 348
 349        /* horizontal */
 350        VidWinWid = video_width;
 351        X = DIV_ROUND_UP(VidWinWid * 64, tvn->Wa);
 352        We = (VidWinWid * 64) / X;
 353        HorDcm = 64 - X;
 354        hcrop1 = 2 * ((tvn->Wa - We) / 4);
 355        hcrop2 = tvn->Wa - We - hcrop1;
 356        HStart = tvn->HStart ? tvn->HStart : 1;
 357        /* (Ronald) Original comment:
 358         * "| 1 Doesn't have any effect, tested on both a DC10 and a DC10+"
 359         * this is false. It inverses chroma values on the LML33R10 (so Cr
 360         * suddenly is shown as Cb and reverse, really cool effect if you
 361         * want to see blue faces, not useful otherwise). So don't use |1.
 362         * However, the DC10 has '0' as HStart, but does need |1, so we
 363         * use a dirty check...
 364         */
 365        HEnd = HStart + tvn->Wa - 1;
 366        HStart += hcrop1;
 367        HEnd -= hcrop2;
 368        reg = ((HStart & ZR36057_VFEHCR_Hmask) << ZR36057_VFEHCR_HStart)
 369            | ((HEnd & ZR36057_VFEHCR_Hmask) << ZR36057_VFEHCR_HEnd);
 370        if (zr->card.vfe_pol.hsync_pol)
 371                reg |= ZR36057_VFEHCR_HSPol;
 372        btwrite(reg, ZR36057_VFEHCR);
 373
 374        /* Vertical */
 375        DispMode = !(video_height > BUZ_MAX_HEIGHT / 2);
 376        VidWinHt = DispMode ? video_height : video_height / 2;
 377        Y = DIV_ROUND_UP(VidWinHt * 64 * 2, tvn->Ha);
 378        He = (VidWinHt * 64) / Y;
 379        VerDcm = 64 - Y;
 380        vcrop1 = (tvn->Ha / 2 - He) / 2;
 381        vcrop2 = tvn->Ha / 2 - He - vcrop1;
 382        VStart = tvn->VStart;
 383        VEnd = VStart + tvn->Ha / 2;    // - 1; FIXME SnapShot times out with -1 in 768*576 on the DC10 - LP
 384        VStart += vcrop1;
 385        VEnd -= vcrop2;
 386        reg = ((VStart & ZR36057_VFEVCR_Vmask) << ZR36057_VFEVCR_VStart)
 387            | ((VEnd & ZR36057_VFEVCR_Vmask) << ZR36057_VFEVCR_VEnd);
 388        if (zr->card.vfe_pol.vsync_pol)
 389                reg |= ZR36057_VFEVCR_VSPol;
 390        btwrite(reg, ZR36057_VFEVCR);
 391
 392        /* scaler and pixel format */
 393        reg = 0;
 394        reg |= (HorDcm << ZR36057_VFESPFR_HorDcm);
 395        reg |= (VerDcm << ZR36057_VFESPFR_VerDcm);
 396        reg |= (DispMode << ZR36057_VFESPFR_DispMode);
 397        /* RJ: I don't know, why the following has to be the opposite
 398         * of the corresponding ZR36060 setting, but only this way
 399         * we get the correct colors when uncompressing to the screen  */
 400        //reg |= ZR36057_VFESPFR_VCLKPol; /**/
 401        /* RJ: Don't know if that is needed for NTSC also */
 402        if (!(zr->norm & V4L2_STD_NTSC))
 403                reg |= ZR36057_VFESPFR_ExtFl;   // NEEDED!!!!!!! Wolfgang
 404        reg |= ZR36057_VFESPFR_TopField;
 405        if (HorDcm >= 48) {
 406                reg |= 3 << ZR36057_VFESPFR_HFilter;    /* 5 tap filter */
 407        } else if (HorDcm >= 32) {
 408                reg |= 2 << ZR36057_VFESPFR_HFilter;    /* 4 tap filter */
 409        } else if (HorDcm >= 16) {
 410                reg |= 1 << ZR36057_VFESPFR_HFilter;    /* 3 tap filter */
 411        }
 412        reg |= format->vfespfr;
 413        btwrite(reg, ZR36057_VFESPFR);
 414
 415        /* display configuration */
 416        reg = (16 << ZR36057_VDCR_MinPix)
 417            | (VidWinHt << ZR36057_VDCR_VidWinHt)
 418            | (VidWinWid << ZR36057_VDCR_VidWinWid);
 419        if (pci_pci_problems & PCIPCI_TRITON)
 420                // || zr->revision < 1) // Revision 1 has also Triton support
 421                reg &= ~ZR36057_VDCR_Triton;
 422        else
 423                reg |= ZR36057_VDCR_Triton;
 424        btwrite(reg, ZR36057_VDCR);
 425
 426        /* (Ronald) don't write this if overlay_mask = NULL */
 427        if (zr->overlay_mask) {
 428                /* Write overlay clipping mask data, but don't enable overlay clipping */
 429                /* RJ: since this makes only sense on the screen, we use
 430                 * zr->overlay_settings.width instead of video_width */
 431
 432                mask_line_size = (BUZ_MAX_WIDTH + 31) / 32;
 433                reg = virt_to_bus(zr->overlay_mask);
 434                btwrite(reg, ZR36057_MMTR);
 435                reg = virt_to_bus(zr->overlay_mask + mask_line_size);
 436                btwrite(reg, ZR36057_MMBR);
 437                reg =
 438                    mask_line_size - (zr->overlay_settings.width +
 439                                      31) / 32;
 440                if (DispMode == 0)
 441                        reg += mask_line_size;
 442                reg <<= ZR36057_OCR_MaskStride;
 443                btwrite(reg, ZR36057_OCR);
 444        }
 445
 446        zr36057_adjust_vfe(zr, zr->codec_mode);
 447}
 448
 449/*
 450 * Switch overlay on or off
 451 */
 452
 453void
 454zr36057_overlay (struct zoran *zr,
 455                 int           on)
 456{
 457        u32 reg;
 458
 459        if (on) {
 460                /* do the necessary settings ... */
 461                btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR);       /* switch it off first */
 462
 463                zr36057_set_vfe(zr,
 464                                zr->overlay_settings.width,
 465                                zr->overlay_settings.height,
 466                                zr->overlay_settings.format);
 467
 468                /* Start and length of each line MUST be 4-byte aligned.
 469                 * This should be already checked before the call to this routine.
 470                 * All error messages are internal driver checking only! */
 471
 472                /* video display top and bottom registers */
 473                reg = (long) zr->vbuf_base +
 474                    zr->overlay_settings.x *
 475                    ((zr->overlay_settings.format->depth + 7) / 8) +
 476                    zr->overlay_settings.y *
 477                    zr->vbuf_bytesperline;
 478                btwrite(reg, ZR36057_VDTR);
 479                if (reg & 3)
 480                        dprintk(1,
 481                                KERN_ERR
 482                                "%s: zr36057_overlay() - video_address not aligned\n",
 483                                ZR_DEVNAME(zr));
 484                if (zr->overlay_settings.height > BUZ_MAX_HEIGHT / 2)
 485                        reg += zr->vbuf_bytesperline;
 486                btwrite(reg, ZR36057_VDBR);
 487
 488                /* video stride, status, and frame grab register */
 489                reg = zr->vbuf_bytesperline -
 490                    zr->overlay_settings.width *
 491                    ((zr->overlay_settings.format->depth + 7) / 8);
 492                if (zr->overlay_settings.height > BUZ_MAX_HEIGHT / 2)
 493                        reg += zr->vbuf_bytesperline;
 494                if (reg & 3)
 495                        dprintk(1,
 496                                KERN_ERR
 497                                "%s: zr36057_overlay() - video_stride not aligned\n",
 498                                ZR_DEVNAME(zr));
 499                reg = (reg << ZR36057_VSSFGR_DispStride);
 500                reg |= ZR36057_VSSFGR_VidOvf;   /* clear overflow status */
 501                btwrite(reg, ZR36057_VSSFGR);
 502
 503                /* Set overlay clipping */
 504                if (zr->overlay_settings.clipcount > 0)
 505                        btor(ZR36057_OCR_OvlEnable, ZR36057_OCR);
 506
 507                /* ... and switch it on */
 508                btor(ZR36057_VDCR_VidEn, ZR36057_VDCR);
 509        } else {
 510                /* Switch it off */
 511                btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR);
 512        }
 513}
 514
 515/*
 516 * The overlay mask has one bit for each pixel on a scan line,
 517 *  and the maximum window size is BUZ_MAX_WIDTH * BUZ_MAX_HEIGHT pixels.
 518 */
 519
 520void write_overlay_mask(struct zoran_fh *fh, struct v4l2_clip *vp, int count)
 521{
 522        struct zoran *zr = fh->zr;
 523        unsigned mask_line_size = (BUZ_MAX_WIDTH + 31) / 32;
 524        u32 *mask;
 525        int x, y, width, height;
 526        unsigned i, j, k;
 527
 528        /* fill mask with one bits */
 529        memset(fh->overlay_mask, ~0, mask_line_size * 4 * BUZ_MAX_HEIGHT);
 530
 531        for (i = 0; i < count; ++i) {
 532                /* pick up local copy of clip */
 533                x = vp[i].c.left;
 534                y = vp[i].c.top;
 535                width = vp[i].c.width;
 536                height = vp[i].c.height;
 537
 538                /* trim clips that extend beyond the window */
 539                if (x < 0) {
 540                        width += x;
 541                        x = 0;
 542                }
 543                if (y < 0) {
 544                        height += y;
 545                        y = 0;
 546                }
 547                if (x + width > fh->overlay_settings.width) {
 548                        width = fh->overlay_settings.width - x;
 549                }
 550                if (y + height > fh->overlay_settings.height) {
 551                        height = fh->overlay_settings.height - y;
 552                }
 553
 554                /* ignore degenerate clips */
 555                if (height <= 0) {
 556                        continue;
 557                }
 558                if (width <= 0) {
 559                        continue;
 560                }
 561
 562                /* apply clip for each scan line */
 563                for (j = 0; j < height; ++j) {
 564                        /* reset bit for each pixel */
 565                        /* this can be optimized later if need be */
 566                        mask = fh->overlay_mask + (y + j) * mask_line_size;
 567                        for (k = 0; k < width; ++k) {
 568                                mask[(x + k) / 32] &=
 569                                    ~((u32) 1 << (x + k) % 32);
 570                        }
 571                }
 572        }
 573}
 574
 575/* Enable/Disable uncompressed memory grabbing of the 36057 */
 576
 577void
 578zr36057_set_memgrab (struct zoran *zr,
 579                     int           mode)
 580{
 581        if (mode) {
 582                /* We only check SnapShot and not FrameGrab here.  SnapShot==1
 583                 * means a capture is already in progress, but FrameGrab==1
 584                 * doesn't necessary mean that.  It's more correct to say a 1
 585                 * to 0 transition indicates a capture completed.  If a
 586                 * capture is pending when capturing is tuned off, FrameGrab
 587                 * will be stuck at 1 until capturing is turned back on.
 588                 */
 589                if (btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_SnapShot)
 590                        dprintk(1,
 591                                KERN_WARNING
 592                                "%s: zr36057_set_memgrab(1) with SnapShot on!?\n",
 593                                ZR_DEVNAME(zr));
 594
 595                /* switch on VSync interrupts */
 596                btwrite(IRQ_MASK, ZR36057_ISR); // Clear Interrupts
 597                btor(zr->card.vsync_int, ZR36057_ICR);  // SW
 598
 599                /* enable SnapShot */
 600                btor(ZR36057_VSSFGR_SnapShot, ZR36057_VSSFGR);
 601
 602                /* Set zr36057 video front end  and enable video */
 603                zr36057_set_vfe(zr, zr->v4l_settings.width,
 604                                zr->v4l_settings.height,
 605                                zr->v4l_settings.format);
 606
 607                zr->v4l_memgrab_active = 1;
 608        } else {
 609                /* switch off VSync interrupts */
 610                btand(~zr->card.vsync_int, ZR36057_ICR);        // SW
 611
 612                zr->v4l_memgrab_active = 0;
 613                zr->v4l_grab_frame = NO_GRAB_ACTIVE;
 614
 615                /* re-enable grabbing to screen if it was running */
 616                if (zr->v4l_overlay_active) {
 617                        zr36057_overlay(zr, 1);
 618                } else {
 619                        btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR);
 620                        btand(~ZR36057_VSSFGR_SnapShot, ZR36057_VSSFGR);
 621                }
 622        }
 623}
 624
 625int
 626wait_grab_pending (struct zoran *zr)
 627{
 628        unsigned long flags;
 629
 630        /* wait until all pending grabs are finished */
 631
 632        if (!zr->v4l_memgrab_active)
 633                return 0;
 634
 635        wait_event_interruptible(zr->v4l_capq,
 636                        (zr->v4l_pend_tail == zr->v4l_pend_head));
 637        if (signal_pending(current))
 638                return -ERESTARTSYS;
 639
 640        spin_lock_irqsave(&zr->spinlock, flags);
 641        zr36057_set_memgrab(zr, 0);
 642        spin_unlock_irqrestore(&zr->spinlock, flags);
 643
 644        return 0;
 645}
 646
 647/*****************************************************************************
 648 *                                                                           *
 649 *  Set up the Buz-specific MJPEG part                                       *
 650 *                                                                           *
 651 *****************************************************************************/
 652
 653static inline void
 654set_frame (struct zoran *zr,
 655           int           val)
 656{
 657        GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_FRAME], val);
 658}
 659
 660static void
 661set_videobus_dir (struct zoran *zr,
 662                  int           val)
 663{
 664        switch (zr->card.type) {
 665        case LML33:
 666        case LML33R10:
 667                if (!lml33dpath)
 668                        GPIO(zr, 5, val);
 669                else
 670                        GPIO(zr, 5, 1);
 671                break;
 672        default:
 673                GPIO(zr, zr->card.gpio[ZR_GPIO_VID_DIR],
 674                     zr->card.gpio_pol[ZR_GPIO_VID_DIR] ? !val : val);
 675                break;
 676        }
 677}
 678
 679static void
 680init_jpeg_queue (struct zoran *zr)
 681{
 682        int i;
 683
 684        /* re-initialize DMA ring stuff */
 685        zr->jpg_que_head = 0;
 686        zr->jpg_dma_head = 0;
 687        zr->jpg_dma_tail = 0;
 688        zr->jpg_que_tail = 0;
 689        zr->jpg_seq_num = 0;
 690        zr->JPEG_error = 0;
 691        zr->num_errors = 0;
 692        zr->jpg_err_seq = 0;
 693        zr->jpg_err_shift = 0;
 694        zr->jpg_queued_num = 0;
 695        for (i = 0; i < zr->jpg_buffers.num_buffers; i++) {
 696                zr->jpg_buffers.buffer[i].state = BUZ_STATE_USER;       /* nothing going on */
 697        }
 698        for (i = 0; i < BUZ_NUM_STAT_COM; i++) {
 699                zr->stat_com[i] = cpu_to_le32(1);       /* mark as unavailable to zr36057 */
 700        }
 701}
 702
 703static void
 704zr36057_set_jpg (struct zoran          *zr,
 705                 enum zoran_codec_mode  mode)
 706{
 707        struct tvnorm *tvn;
 708        u32 reg;
 709
 710        tvn = zr->timing;
 711
 712        /* assert P_Reset, disable code transfer, deassert Active */
 713        btwrite(0, ZR36057_JPC);
 714
 715        /* MJPEG compression mode */
 716        switch (mode) {
 717
 718        case BUZ_MODE_MOTION_COMPRESS:
 719        default:
 720                reg = ZR36057_JMC_MJPGCmpMode;
 721                break;
 722
 723        case BUZ_MODE_MOTION_DECOMPRESS:
 724                reg = ZR36057_JMC_MJPGExpMode;
 725                reg |= ZR36057_JMC_SyncMstr;
 726                /* RJ: The following is experimental - improves the output to screen */
 727                //if(zr->jpg_settings.VFIFO_FB) reg |= ZR36057_JMC_VFIFO_FB; // No, it doesn't. SM
 728                break;
 729
 730        case BUZ_MODE_STILL_COMPRESS:
 731                reg = ZR36057_JMC_JPGCmpMode;
 732                break;
 733
 734        case BUZ_MODE_STILL_DECOMPRESS:
 735                reg = ZR36057_JMC_JPGExpMode;
 736                break;
 737
 738        }
 739        reg |= ZR36057_JMC_JPG;
 740        if (zr->jpg_settings.field_per_buff == 1)
 741                reg |= ZR36057_JMC_Fld_per_buff;
 742        btwrite(reg, ZR36057_JMC);
 743
 744        /* vertical */
 745        btor(ZR36057_VFEVCR_VSPol, ZR36057_VFEVCR);
 746        reg = (6 << ZR36057_VSP_VsyncSize) |
 747              (tvn->Ht << ZR36057_VSP_FrmTot);
 748        btwrite(reg, ZR36057_VSP);
 749        reg = ((zr->jpg_settings.img_y + tvn->VStart) << ZR36057_FVAP_NAY) |
 750              (zr->jpg_settings.img_height << ZR36057_FVAP_PAY);
 751        btwrite(reg, ZR36057_FVAP);
 752
 753        /* horizontal */
 754        if (zr->card.vfe_pol.hsync_pol)
 755                btor(ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);
 756        else
 757                btand(~ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);
 758        reg = ((tvn->HSyncStart) << ZR36057_HSP_HsyncStart) |
 759              (tvn->Wt << ZR36057_HSP_LineTot);
 760        btwrite(reg, ZR36057_HSP);
 761        reg = ((zr->jpg_settings.img_x +
 762                tvn->HStart + 4) << ZR36057_FHAP_NAX) |
 763              (zr->jpg_settings.img_width << ZR36057_FHAP_PAX);
 764        btwrite(reg, ZR36057_FHAP);
 765
 766        /* field process parameters */
 767        if (zr->jpg_settings.odd_even)
 768                reg = ZR36057_FPP_Odd_Even;
 769        else
 770                reg = 0;
 771
 772        btwrite(reg, ZR36057_FPP);
 773
 774        /* Set proper VCLK Polarity, else colors will be wrong during playback */
 775        //btor(ZR36057_VFESPFR_VCLKPol, ZR36057_VFESPFR);
 776
 777        /* code base address */
 778        reg = virt_to_bus(zr->stat_com);
 779        btwrite(reg, ZR36057_JCBA);
 780
 781        /* FIFO threshold (FIFO is 160. double words) */
 782        /* NOTE: decimal values here */
 783        switch (mode) {
 784
 785        case BUZ_MODE_STILL_COMPRESS:
 786        case BUZ_MODE_MOTION_COMPRESS:
 787                if (zr->card.type != BUZ)
 788                        reg = 140;
 789                else
 790                        reg = 60;
 791                break;
 792
 793        case BUZ_MODE_STILL_DECOMPRESS:
 794        case BUZ_MODE_MOTION_DECOMPRESS:
 795                reg = 20;
 796                break;
 797
 798        default:
 799                reg = 80;
 800                break;
 801
 802        }
 803        btwrite(reg, ZR36057_JCFT);
 804        zr36057_adjust_vfe(zr, mode);
 805
 806}
 807
 808void
 809print_interrupts (struct zoran *zr)
 810{
 811        int res, noerr = 0;
 812
 813        printk(KERN_INFO "%s: interrupts received:", ZR_DEVNAME(zr));
 814        if ((res = zr->field_counter) < -1 || res > 1) {
 815                printk(KERN_CONT " FD:%d", res);
 816        }
 817        if ((res = zr->intr_counter_GIRQ1) != 0) {
 818                printk(KERN_CONT " GIRQ1:%d", res);
 819                noerr++;
 820        }
 821        if ((res = zr->intr_counter_GIRQ0) != 0) {
 822                printk(KERN_CONT " GIRQ0:%d", res);
 823                noerr++;
 824        }
 825        if ((res = zr->intr_counter_CodRepIRQ) != 0) {
 826                printk(KERN_CONT " CodRepIRQ:%d", res);
 827                noerr++;
 828        }
 829        if ((res = zr->intr_counter_JPEGRepIRQ) != 0) {
 830                printk(KERN_CONT " JPEGRepIRQ:%d", res);
 831                noerr++;
 832        }
 833        if (zr->JPEG_max_missed) {
 834                printk(KERN_CONT " JPEG delays: max=%d min=%d", zr->JPEG_max_missed,
 835                       zr->JPEG_min_missed);
 836        }
 837        if (zr->END_event_missed) {
 838                printk(KERN_CONT " ENDs missed: %d", zr->END_event_missed);
 839        }
 840        //if (zr->jpg_queued_num) {
 841        printk(KERN_CONT " queue_state=%ld/%ld/%ld/%ld", zr->jpg_que_tail,
 842               zr->jpg_dma_tail, zr->jpg_dma_head, zr->jpg_que_head);
 843        //}
 844        if (!noerr) {
 845                printk(KERN_CONT ": no interrupts detected.");
 846        }
 847        printk(KERN_CONT "\n");
 848}
 849
 850void
 851clear_interrupt_counters (struct zoran *zr)
 852{
 853        zr->intr_counter_GIRQ1 = 0;
 854        zr->intr_counter_GIRQ0 = 0;
 855        zr->intr_counter_CodRepIRQ = 0;
 856        zr->intr_counter_JPEGRepIRQ = 0;
 857        zr->field_counter = 0;
 858        zr->IRQ1_in = 0;
 859        zr->IRQ1_out = 0;
 860        zr->JPEG_in = 0;
 861        zr->JPEG_out = 0;
 862        zr->JPEG_0 = 0;
 863        zr->JPEG_1 = 0;
 864        zr->END_event_missed = 0;
 865        zr->JPEG_missed = 0;
 866        zr->JPEG_max_missed = 0;
 867        zr->JPEG_min_missed = 0x7fffffff;
 868}
 869
 870static u32
 871count_reset_interrupt (struct zoran *zr)
 872{
 873        u32 isr;
 874
 875        if ((isr = btread(ZR36057_ISR) & 0x78000000)) {
 876                if (isr & ZR36057_ISR_GIRQ1) {
 877                        btwrite(ZR36057_ISR_GIRQ1, ZR36057_ISR);
 878                        zr->intr_counter_GIRQ1++;
 879                }
 880                if (isr & ZR36057_ISR_GIRQ0) {
 881                        btwrite(ZR36057_ISR_GIRQ0, ZR36057_ISR);
 882                        zr->intr_counter_GIRQ0++;
 883                }
 884                if (isr & ZR36057_ISR_CodRepIRQ) {
 885                        btwrite(ZR36057_ISR_CodRepIRQ, ZR36057_ISR);
 886                        zr->intr_counter_CodRepIRQ++;
 887                }
 888                if (isr & ZR36057_ISR_JPEGRepIRQ) {
 889                        btwrite(ZR36057_ISR_JPEGRepIRQ, ZR36057_ISR);
 890                        zr->intr_counter_JPEGRepIRQ++;
 891                }
 892        }
 893        return isr;
 894}
 895
 896void
 897jpeg_start (struct zoran *zr)
 898{
 899        int reg;
 900
 901        zr->frame_num = 0;
 902
 903        /* deassert P_reset, disable code transfer, deassert Active */
 904        btwrite(ZR36057_JPC_P_Reset, ZR36057_JPC);
 905        /* stop flushing the internal code buffer */
 906        btand(~ZR36057_MCTCR_CFlush, ZR36057_MCTCR);
 907        /* enable code transfer */
 908        btor(ZR36057_JPC_CodTrnsEn, ZR36057_JPC);
 909
 910        /* clear IRQs */
 911        btwrite(IRQ_MASK, ZR36057_ISR);
 912        /* enable the JPEG IRQs */
 913        btwrite(zr->card.jpeg_int |
 914                        ZR36057_ICR_JPEGRepIRQ |
 915                        ZR36057_ICR_IntPinEn,
 916                ZR36057_ICR);
 917
 918        set_frame(zr, 0);       // \FRAME
 919
 920        /* set the JPEG codec guest ID */
 921        reg = (zr->card.gpcs[1] << ZR36057_JCGI_JPEGuestID) |
 922               (0 << ZR36057_JCGI_JPEGuestReg);
 923        btwrite(reg, ZR36057_JCGI);
 924
 925        if (zr->card.video_vfe == CODEC_TYPE_ZR36016 &&
 926            zr->card.video_codec == CODEC_TYPE_ZR36050) {
 927                /* Enable processing on the ZR36016 */
 928                if (zr->vfe)
 929                        zr36016_write(zr->vfe, 0, 1);
 930
 931                /* load the address of the GO register in the ZR36050 latch */
 932                post_office_write(zr, 0, 0, 0);
 933        }
 934
 935        /* assert Active */
 936        btor(ZR36057_JPC_Active, ZR36057_JPC);
 937
 938        /* enable the Go generation */
 939        btor(ZR36057_JMC_Go_en, ZR36057_JMC);
 940        udelay(30);
 941
 942        set_frame(zr, 1);       // /FRAME
 943
 944        dprintk(3, KERN_DEBUG "%s: jpeg_start\n", ZR_DEVNAME(zr));
 945}
 946
 947void
 948zr36057_enable_jpg (struct zoran          *zr,
 949                    enum zoran_codec_mode  mode)
 950{
 951        struct vfe_settings cap;
 952        int field_size =
 953            zr->jpg_buffers.buffer_size / zr->jpg_settings.field_per_buff;
 954
 955        zr->codec_mode = mode;
 956
 957        cap.x = zr->jpg_settings.img_x;
 958        cap.y = zr->jpg_settings.img_y;
 959        cap.width = zr->jpg_settings.img_width;
 960        cap.height = zr->jpg_settings.img_height;
 961        cap.decimation =
 962            zr->jpg_settings.HorDcm | (zr->jpg_settings.VerDcm << 8);
 963        cap.quality = zr->jpg_settings.jpg_comp.quality;
 964
 965        switch (mode) {
 966
 967        case BUZ_MODE_MOTION_COMPRESS: {
 968                struct jpeg_app_marker app;
 969                struct jpeg_com_marker com;
 970
 971                /* In motion compress mode, the decoder output must be enabled, and
 972                 * the video bus direction set to input.
 973                 */
 974                set_videobus_dir(zr, 0);
 975                decoder_call(zr, video, s_stream, 1);
 976                encoder_call(zr, video, s_routing, 0, 0, 0);
 977
 978                /* Take the JPEG codec and the VFE out of sleep */
 979                jpeg_codec_sleep(zr, 0);
 980
 981                /* set JPEG app/com marker */
 982                app.appn = zr->jpg_settings.jpg_comp.APPn;
 983                app.len = zr->jpg_settings.jpg_comp.APP_len;
 984                memcpy(app.data, zr->jpg_settings.jpg_comp.APP_data, 60);
 985                zr->codec->control(zr->codec, CODEC_S_JPEG_APP_DATA,
 986                                   sizeof(struct jpeg_app_marker), &app);
 987
 988                com.len = zr->jpg_settings.jpg_comp.COM_len;
 989                memcpy(com.data, zr->jpg_settings.jpg_comp.COM_data, 60);
 990                zr->codec->control(zr->codec, CODEC_S_JPEG_COM_DATA,
 991                                   sizeof(struct jpeg_com_marker), &com);
 992
 993                /* Setup the JPEG codec */
 994                zr->codec->control(zr->codec, CODEC_S_JPEG_TDS_BYTE,
 995                                   sizeof(int), &field_size);
 996                zr->codec->set_video(zr->codec, zr->timing, &cap,
 997                                     &zr->card.vfe_pol);
 998                zr->codec->set_mode(zr->codec, CODEC_DO_COMPRESSION);
 999
1000                /* Setup the VFE */
1001                if (zr->vfe) {
1002                        zr->vfe->control(zr->vfe, CODEC_S_JPEG_TDS_BYTE,
1003                                         sizeof(int), &field_size);
1004                        zr->vfe->set_video(zr->vfe, zr->timing, &cap,
1005                                           &zr->card.vfe_pol);
1006                        zr->vfe->set_mode(zr->vfe, CODEC_DO_COMPRESSION);
1007                }
1008
1009                init_jpeg_queue(zr);
1010                zr36057_set_jpg(zr, mode);      // \P_Reset, ... Video param, FIFO
1011
1012                clear_interrupt_counters(zr);
1013                dprintk(2, KERN_INFO "%s: enable_jpg(MOTION_COMPRESS)\n",
1014                        ZR_DEVNAME(zr));
1015                break;
1016        }
1017
1018        case BUZ_MODE_MOTION_DECOMPRESS:
1019                /* In motion decompression mode, the decoder output must be disabled, and
1020                 * the video bus direction set to output.
1021                 */
1022                decoder_call(zr, video, s_stream, 0);
1023                set_videobus_dir(zr, 1);
1024                encoder_call(zr, video, s_routing, 1, 0, 0);
1025
1026                /* Take the JPEG codec and the VFE out of sleep */
1027                jpeg_codec_sleep(zr, 0);
1028                /* Setup the VFE */
1029                if (zr->vfe) {
1030                        zr->vfe->set_video(zr->vfe, zr->timing, &cap,
1031                                           &zr->card.vfe_pol);
1032                        zr->vfe->set_mode(zr->vfe, CODEC_DO_EXPANSION);
1033                }
1034                /* Setup the JPEG codec */
1035                zr->codec->set_video(zr->codec, zr->timing, &cap,
1036                                     &zr->card.vfe_pol);
1037                zr->codec->set_mode(zr->codec, CODEC_DO_EXPANSION);
1038
1039                init_jpeg_queue(zr);
1040                zr36057_set_jpg(zr, mode);      // \P_Reset, ... Video param, FIFO
1041
1042                clear_interrupt_counters(zr);
1043                dprintk(2, KERN_INFO "%s: enable_jpg(MOTION_DECOMPRESS)\n",
1044                        ZR_DEVNAME(zr));
1045                break;
1046
1047        case BUZ_MODE_IDLE:
1048        default:
1049                /* shut down processing */
1050                btand(~(zr->card.jpeg_int | ZR36057_ICR_JPEGRepIRQ),
1051                      ZR36057_ICR);
1052                btwrite(zr->card.jpeg_int | ZR36057_ICR_JPEGRepIRQ,
1053                        ZR36057_ISR);
1054                btand(~ZR36057_JMC_Go_en, ZR36057_JMC); // \Go_en
1055
1056                msleep(50);
1057
1058                set_videobus_dir(zr, 0);
1059                set_frame(zr, 1);       // /FRAME
1060                btor(ZR36057_MCTCR_CFlush, ZR36057_MCTCR);      // /CFlush
1061                btwrite(0, ZR36057_JPC);        // \P_Reset,\CodTrnsEn,\Active
1062                btand(~ZR36057_JMC_VFIFO_FB, ZR36057_JMC);
1063                btand(~ZR36057_JMC_SyncMstr, ZR36057_JMC);
1064                jpeg_codec_reset(zr);
1065                jpeg_codec_sleep(zr, 1);
1066                zr36057_adjust_vfe(zr, mode);
1067
1068                decoder_call(zr, video, s_stream, 1);
1069                encoder_call(zr, video, s_routing, 0, 0, 0);
1070
1071                dprintk(2, KERN_INFO "%s: enable_jpg(IDLE)\n", ZR_DEVNAME(zr));
1072                break;
1073
1074        }
1075}
1076
1077/* when this is called the spinlock must be held */
1078void
1079zoran_feed_stat_com (struct zoran *zr)
1080{
1081        /* move frames from pending queue to DMA */
1082
1083        int frame, i, max_stat_com;
1084
1085        max_stat_com =
1086            (zr->jpg_settings.TmpDcm ==
1087             1) ? BUZ_NUM_STAT_COM : (BUZ_NUM_STAT_COM >> 1);
1088
1089        while ((zr->jpg_dma_head - zr->jpg_dma_tail) < max_stat_com &&
1090               zr->jpg_dma_head < zr->jpg_que_head) {
1091
1092                frame = zr->jpg_pend[zr->jpg_dma_head & BUZ_MASK_FRAME];
1093                if (zr->jpg_settings.TmpDcm == 1) {
1094                        /* fill 1 stat_com entry */
1095                        i = (zr->jpg_dma_head -
1096                             zr->jpg_err_shift) & BUZ_MASK_STAT_COM;
1097                        if (!(zr->stat_com[i] & cpu_to_le32(1)))
1098                                break;
1099                        zr->stat_com[i] =
1100                            cpu_to_le32(zr->jpg_buffers.buffer[frame].jpg.frag_tab_bus);
1101                } else {
1102                        /* fill 2 stat_com entries */
1103                        i = ((zr->jpg_dma_head -
1104                              zr->jpg_err_shift) & 1) * 2;
1105                        if (!(zr->stat_com[i] & cpu_to_le32(1)))
1106                                break;
1107                        zr->stat_com[i] =
1108                            cpu_to_le32(zr->jpg_buffers.buffer[frame].jpg.frag_tab_bus);
1109                        zr->stat_com[i + 1] =
1110                            cpu_to_le32(zr->jpg_buffers.buffer[frame].jpg.frag_tab_bus);
1111                }
1112                zr->jpg_buffers.buffer[frame].state = BUZ_STATE_DMA;
1113                zr->jpg_dma_head++;
1114
1115        }
1116        if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS)
1117                zr->jpg_queued_num++;
1118}
1119
1120/* when this is called the spinlock must be held */
1121static void
1122zoran_reap_stat_com (struct zoran *zr)
1123{
1124        /* move frames from DMA queue to done queue */
1125
1126        int i;
1127        u32 stat_com;
1128        unsigned int seq;
1129        unsigned int dif;
1130        struct zoran_buffer *buffer;
1131        int frame;
1132
1133        /* In motion decompress we don't have a hardware frame counter,
1134         * we just count the interrupts here */
1135
1136        if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) {
1137                zr->jpg_seq_num++;
1138        }
1139        while (zr->jpg_dma_tail < zr->jpg_dma_head) {
1140                if (zr->jpg_settings.TmpDcm == 1)
1141                        i = (zr->jpg_dma_tail -
1142                             zr->jpg_err_shift) & BUZ_MASK_STAT_COM;
1143                else
1144                        i = ((zr->jpg_dma_tail -
1145                              zr->jpg_err_shift) & 1) * 2 + 1;
1146
1147                stat_com = le32_to_cpu(zr->stat_com[i]);
1148
1149                if ((stat_com & 1) == 0) {
1150                        return;
1151                }
1152                frame = zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME];
1153                buffer = &zr->jpg_buffers.buffer[frame];
1154                buffer->bs.ts = ktime_get_ns();
1155
1156                if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) {
1157                        buffer->bs.length = (stat_com & 0x7fffff) >> 1;
1158
1159                        /* update sequence number with the help of the counter in stat_com */
1160
1161                        seq = ((stat_com >> 24) + zr->jpg_err_seq) & 0xff;
1162                        dif = (seq - zr->jpg_seq_num) & 0xff;
1163                        zr->jpg_seq_num += dif;
1164                } else {
1165                        buffer->bs.length = 0;
1166                }
1167                buffer->bs.seq =
1168                    zr->jpg_settings.TmpDcm ==
1169                    2 ? (zr->jpg_seq_num >> 1) : zr->jpg_seq_num;
1170                buffer->state = BUZ_STATE_DONE;
1171
1172                zr->jpg_dma_tail++;
1173        }
1174}
1175
1176static void zoran_restart(struct zoran *zr)
1177{
1178        /* Now the stat_comm buffer is ready for restart */
1179        unsigned int status = 0;
1180        int mode;
1181
1182        if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) {
1183                decoder_call(zr, video, g_input_status, &status);
1184                mode = CODEC_DO_COMPRESSION;
1185        } else {
1186                status = V4L2_IN_ST_NO_SIGNAL;
1187                mode = CODEC_DO_EXPANSION;
1188        }
1189        if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS ||
1190            !(status & V4L2_IN_ST_NO_SIGNAL)) {
1191                /********** RESTART code *************/
1192                jpeg_codec_reset(zr);
1193                zr->codec->set_mode(zr->codec, mode);
1194                zr36057_set_jpg(zr, zr->codec_mode);
1195                jpeg_start(zr);
1196
1197                if (zr->num_errors <= 8)
1198                        dprintk(2, KERN_INFO "%s: Restart\n",
1199                                ZR_DEVNAME(zr));
1200
1201                zr->JPEG_missed = 0;
1202                zr->JPEG_error = 2;
1203                /********** End RESTART code ***********/
1204        }
1205}
1206
1207static void
1208error_handler (struct zoran *zr,
1209               u32           astat,
1210               u32           stat)
1211{
1212        int i;
1213
1214        /* This is JPEG error handling part */
1215        if (zr->codec_mode != BUZ_MODE_MOTION_COMPRESS &&
1216            zr->codec_mode != BUZ_MODE_MOTION_DECOMPRESS) {
1217                return;
1218        }
1219
1220        if ((stat & 1) == 0 &&
1221            zr->codec_mode == BUZ_MODE_MOTION_COMPRESS &&
1222            zr->jpg_dma_tail - zr->jpg_que_tail >= zr->jpg_buffers.num_buffers) {
1223                /* No free buffers... */
1224                zoran_reap_stat_com(zr);
1225                zoran_feed_stat_com(zr);
1226                wake_up_interruptible(&zr->jpg_capq);
1227                zr->JPEG_missed = 0;
1228                return;
1229        }
1230
1231        if (zr->JPEG_error == 1) {
1232                zoran_restart(zr);
1233                return;
1234        }
1235
1236        /*
1237         * First entry: error just happened during normal operation
1238         *
1239         * In BUZ_MODE_MOTION_COMPRESS:
1240         *
1241         * Possible glitch in TV signal. In this case we should
1242         * stop the codec and wait for good quality signal before
1243         * restarting it to avoid further problems
1244         *
1245         * In BUZ_MODE_MOTION_DECOMPRESS:
1246         *
1247         * Bad JPEG frame: we have to mark it as processed (codec crashed
1248         * and was not able to do it itself), and to remove it from queue.
1249         */
1250        btand(~ZR36057_JMC_Go_en, ZR36057_JMC);
1251        udelay(1);
1252        stat = stat | (post_office_read(zr, 7, 0) & 3) << 8;
1253        btwrite(0, ZR36057_JPC);
1254        btor(ZR36057_MCTCR_CFlush, ZR36057_MCTCR);
1255        jpeg_codec_reset(zr);
1256        jpeg_codec_sleep(zr, 1);
1257        zr->JPEG_error = 1;
1258        zr->num_errors++;
1259
1260        /* Report error */
1261        if (zr36067_debug > 1 && zr->num_errors <= 8) {
1262                long frame;
1263                int j;
1264
1265                frame = zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME];
1266                printk(KERN_ERR
1267                       "%s: JPEG error stat=0x%08x(0x%08x) queue_state=%ld/%ld/%ld/%ld seq=%ld frame=%ld. Codec stopped. ",
1268                       ZR_DEVNAME(zr), stat, zr->last_isr,
1269                       zr->jpg_que_tail, zr->jpg_dma_tail,
1270                       zr->jpg_dma_head, zr->jpg_que_head,
1271                       zr->jpg_seq_num, frame);
1272                printk(KERN_INFO "stat_com frames:");
1273                for (j = 0; j < BUZ_NUM_STAT_COM; j++) {
1274                        for (i = 0; i < zr->jpg_buffers.num_buffers; i++) {
1275                                if (le32_to_cpu(zr->stat_com[j]) == zr->jpg_buffers.buffer[i].jpg.frag_tab_bus)
1276                                        printk(KERN_CONT "% d->%d", j, i);
1277                        }
1278                }
1279                printk(KERN_CONT "\n");
1280        }
1281        /* Find an entry in stat_com and rotate contents */
1282        if (zr->jpg_settings.TmpDcm == 1)
1283                i = (zr->jpg_dma_tail - zr->jpg_err_shift) & BUZ_MASK_STAT_COM;
1284        else
1285                i = ((zr->jpg_dma_tail - zr->jpg_err_shift) & 1) * 2;
1286        if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) {
1287                /* Mimic zr36067 operation */
1288                zr->stat_com[i] |= cpu_to_le32(1);
1289                if (zr->jpg_settings.TmpDcm != 1)
1290                        zr->stat_com[i + 1] |= cpu_to_le32(1);
1291                /* Refill */
1292                zoran_reap_stat_com(zr);
1293                zoran_feed_stat_com(zr);
1294                wake_up_interruptible(&zr->jpg_capq);
1295                /* Find an entry in stat_com again after refill */
1296                if (zr->jpg_settings.TmpDcm == 1)
1297                        i = (zr->jpg_dma_tail - zr->jpg_err_shift) & BUZ_MASK_STAT_COM;
1298                else
1299                        i = ((zr->jpg_dma_tail - zr->jpg_err_shift) & 1) * 2;
1300        }
1301        if (i) {
1302                /* Rotate stat_comm entries to make current entry first */
1303                int j;
1304                __le32 bus_addr[BUZ_NUM_STAT_COM];
1305
1306                /* Here we are copying the stat_com array, which
1307                 * is already in little endian format, so
1308                 * no endian conversions here
1309                 */
1310                memcpy(bus_addr, zr->stat_com, sizeof(bus_addr));
1311
1312                for (j = 0; j < BUZ_NUM_STAT_COM; j++)
1313                        zr->stat_com[j] = bus_addr[(i + j) & BUZ_MASK_STAT_COM];
1314
1315                zr->jpg_err_shift += i;
1316                zr->jpg_err_shift &= BUZ_MASK_STAT_COM;
1317        }
1318        if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS)
1319                zr->jpg_err_seq = zr->jpg_seq_num;      /* + 1; */
1320        zoran_restart(zr);
1321}
1322
1323irqreturn_t
1324zoran_irq (int             irq,
1325           void           *dev_id)
1326{
1327        u32 stat, astat;
1328        int count;
1329        struct zoran *zr;
1330        unsigned long flags;
1331
1332        zr = dev_id;
1333        count = 0;
1334
1335        if (zr->testing) {
1336                /* Testing interrupts */
1337                spin_lock_irqsave(&zr->spinlock, flags);
1338                while ((stat = count_reset_interrupt(zr))) {
1339                        if (count++ > 100) {
1340                                btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR);
1341                                dprintk(1,
1342                                        KERN_ERR
1343                                        "%s: IRQ lockup while testing, isr=0x%08x, cleared int mask\n",
1344                                        ZR_DEVNAME(zr), stat);
1345                                wake_up_interruptible(&zr->test_q);
1346                        }
1347                }
1348                zr->last_isr = stat;
1349                spin_unlock_irqrestore(&zr->spinlock, flags);
1350                return IRQ_HANDLED;
1351        }
1352
1353        spin_lock_irqsave(&zr->spinlock, flags);
1354        while (1) {
1355                /* get/clear interrupt status bits */
1356                stat = count_reset_interrupt(zr);
1357                astat = stat & IRQ_MASK;
1358                if (!astat) {
1359                        break;
1360                }
1361                dprintk(4,
1362                        KERN_DEBUG
1363                        "zoran_irq: astat: 0x%08x, mask: 0x%08x\n",
1364                        astat, btread(ZR36057_ICR));
1365                if (astat & zr->card.vsync_int) {       // SW
1366
1367                        if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS ||
1368                            zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) {
1369                                /* count missed interrupts */
1370                                zr->JPEG_missed++;
1371                        }
1372                        //post_office_read(zr,1,0);
1373                        /* Interrupts may still happen when
1374                         * zr->v4l_memgrab_active is switched off.
1375                         * We simply ignore them */
1376
1377                        if (zr->v4l_memgrab_active) {
1378                                /* A lot more checks should be here ... */
1379                                if ((btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_SnapShot) == 0)
1380                                        dprintk(1,
1381                                                KERN_WARNING
1382                                                "%s: BuzIRQ with SnapShot off ???\n",
1383                                                ZR_DEVNAME(zr));
1384
1385                                if (zr->v4l_grab_frame != NO_GRAB_ACTIVE) {
1386                                        /* There is a grab on a frame going on, check if it has finished */
1387                                        if ((btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_FrameGrab) == 0) {
1388                                                /* it is finished, notify the user */
1389
1390                                                zr->v4l_buffers.buffer[zr->v4l_grab_frame].state = BUZ_STATE_DONE;
1391                                                zr->v4l_buffers.buffer[zr->v4l_grab_frame].bs.seq = zr->v4l_grab_seq;
1392                                                zr->v4l_buffers.buffer[zr->v4l_grab_frame].bs.ts = ktime_get_ns();
1393                                                zr->v4l_grab_frame = NO_GRAB_ACTIVE;
1394                                                zr->v4l_pend_tail++;
1395                                        }
1396                                }
1397
1398                                if (zr->v4l_grab_frame == NO_GRAB_ACTIVE)
1399                                        wake_up_interruptible(&zr->v4l_capq);
1400
1401                                /* Check if there is another grab queued */
1402
1403                                if (zr->v4l_grab_frame == NO_GRAB_ACTIVE &&
1404                                    zr->v4l_pend_tail != zr->v4l_pend_head) {
1405                                        int frame = zr->v4l_pend[zr->v4l_pend_tail & V4L_MASK_FRAME];
1406                                        u32 reg;
1407
1408                                        zr->v4l_grab_frame = frame;
1409
1410                                        /* Set zr36057 video front end and enable video */
1411
1412                                        /* Buffer address */
1413
1414                                        reg = zr->v4l_buffers.buffer[frame].v4l.fbuffer_bus;
1415                                        btwrite(reg, ZR36057_VDTR);
1416                                        if (zr->v4l_settings.height > BUZ_MAX_HEIGHT / 2)
1417                                                reg += zr->v4l_settings.bytesperline;
1418                                        btwrite(reg, ZR36057_VDBR);
1419
1420                                        /* video stride, status, and frame grab register */
1421                                        reg = 0;
1422                                        if (zr->v4l_settings.height > BUZ_MAX_HEIGHT / 2)
1423                                                reg += zr->v4l_settings.bytesperline;
1424                                        reg = (reg << ZR36057_VSSFGR_DispStride);
1425                                        reg |= ZR36057_VSSFGR_VidOvf;
1426                                        reg |= ZR36057_VSSFGR_SnapShot;
1427                                        reg |= ZR36057_VSSFGR_FrameGrab;
1428                                        btwrite(reg, ZR36057_VSSFGR);
1429
1430                                        btor(ZR36057_VDCR_VidEn,
1431                                             ZR36057_VDCR);
1432                                }
1433                        }
1434
1435                        /* even if we don't grab, we do want to increment
1436                         * the sequence counter to see lost frames */
1437                        zr->v4l_grab_seq++;
1438                }
1439#if (IRQ_MASK & ZR36057_ISR_CodRepIRQ)
1440                if (astat & ZR36057_ISR_CodRepIRQ) {
1441                        zr->intr_counter_CodRepIRQ++;
1442                        IDEBUG(printk(KERN_DEBUG "%s: ZR36057_ISR_CodRepIRQ\n",
1443                                ZR_DEVNAME(zr)));
1444                        btand(~ZR36057_ICR_CodRepIRQ, ZR36057_ICR);
1445                }
1446#endif                          /* (IRQ_MASK & ZR36057_ISR_CodRepIRQ) */
1447
1448#if (IRQ_MASK & ZR36057_ISR_JPEGRepIRQ)
1449                if ((astat & ZR36057_ISR_JPEGRepIRQ) &&
1450                    (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS ||
1451                     zr->codec_mode == BUZ_MODE_MOTION_COMPRESS)) {
1452                        if (zr36067_debug > 1 && (!zr->frame_num || zr->JPEG_error)) {
1453                                char sv[BUZ_NUM_STAT_COM + 1];
1454                                int i;
1455
1456                                printk(KERN_INFO
1457                                       "%s: first frame ready: state=0x%08x odd_even=%d field_per_buff=%d delay=%d\n",
1458                                       ZR_DEVNAME(zr), stat,
1459                                       zr->jpg_settings.odd_even,
1460                                       zr->jpg_settings.field_per_buff,
1461                                       zr->JPEG_missed);
1462
1463                                for (i = 0; i < BUZ_NUM_STAT_COM; i++)
1464                                        sv[i] = le32_to_cpu(zr->stat_com[i]) & 1 ? '1' : '0';
1465                                sv[BUZ_NUM_STAT_COM] = 0;
1466                                printk(KERN_INFO
1467                                       "%s: stat_com=%s queue_state=%ld/%ld/%ld/%ld\n",
1468                                       ZR_DEVNAME(zr), sv,
1469                                       zr->jpg_que_tail,
1470                                       zr->jpg_dma_tail,
1471                                       zr->jpg_dma_head,
1472                                       zr->jpg_que_head);
1473                        } else {
1474                                /* Get statistics */
1475                                if (zr->JPEG_missed > zr->JPEG_max_missed)
1476                                        zr->JPEG_max_missed = zr->JPEG_missed;
1477                                if (zr->JPEG_missed < zr->JPEG_min_missed)
1478                                        zr->JPEG_min_missed = zr->JPEG_missed;
1479                        }
1480
1481                        if (zr36067_debug > 2 && zr->frame_num < 6) {
1482                                int i;
1483
1484                                printk(KERN_INFO "%s: seq=%ld stat_com:",
1485                                       ZR_DEVNAME(zr), zr->jpg_seq_num);
1486                                for (i = 0; i < 4; i++) {
1487                                        printk(KERN_CONT " %08x",
1488                                               le32_to_cpu(zr->stat_com[i]));
1489                                }
1490                                printk(KERN_CONT "\n");
1491                        }
1492                        zr->frame_num++;
1493                        zr->JPEG_missed = 0;
1494                        zr->JPEG_error = 0;
1495                        zoran_reap_stat_com(zr);
1496                        zoran_feed_stat_com(zr);
1497                        wake_up_interruptible(&zr->jpg_capq);
1498                }
1499#endif                          /* (IRQ_MASK & ZR36057_ISR_JPEGRepIRQ) */
1500
1501                /* DATERR, too many fields missed, error processing */
1502                if ((astat & zr->card.jpeg_int) ||
1503                    zr->JPEG_missed > 25 ||
1504                    zr->JPEG_error == 1 ||
1505                    ((zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) &&
1506                     (zr->frame_num && (zr->JPEG_missed > zr->jpg_settings.field_per_buff)))) {
1507                        error_handler(zr, astat, stat);
1508                }
1509
1510                count++;
1511                if (count > 10) {
1512                        dprintk(2, KERN_WARNING "%s: irq loop %d\n",
1513                                ZR_DEVNAME(zr), count);
1514                        if (count > 20) {
1515                                btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR);
1516                                dprintk(2,
1517                                        KERN_ERR
1518                                        "%s: IRQ lockup, cleared int mask\n",
1519                                        ZR_DEVNAME(zr));
1520                                break;
1521                        }
1522                }
1523                zr->last_isr = stat;
1524        }
1525        spin_unlock_irqrestore(&zr->spinlock, flags);
1526
1527        return IRQ_HANDLED;
1528}
1529
1530void
1531zoran_set_pci_master (struct zoran *zr,
1532                      int           set_master)
1533{
1534        if (set_master) {
1535                pci_set_master(zr->pci_dev);
1536        } else {
1537                u16 command;
1538
1539                pci_read_config_word(zr->pci_dev, PCI_COMMAND, &command);
1540                command &= ~PCI_COMMAND_MASTER;
1541                pci_write_config_word(zr->pci_dev, PCI_COMMAND, command);
1542        }
1543}
1544
1545void
1546zoran_init_hardware (struct zoran *zr)
1547{
1548        /* Enable bus-mastering */
1549        zoran_set_pci_master(zr, 1);
1550
1551        /* Initialize the board */
1552        if (zr->card.init) {
1553                zr->card.init(zr);
1554        }
1555
1556        decoder_call(zr, core, init, 0);
1557        decoder_call(zr, video, s_std, zr->norm);
1558        decoder_call(zr, video, s_routing,
1559                zr->card.input[zr->input].muxsel, 0, 0);
1560
1561        encoder_call(zr, core, init, 0);
1562        encoder_call(zr, video, s_std_output, zr->norm);
1563        encoder_call(zr, video, s_routing, 0, 0, 0);
1564
1565        /* toggle JPEG codec sleep to sync PLL */
1566        jpeg_codec_sleep(zr, 1);
1567        jpeg_codec_sleep(zr, 0);
1568
1569        /*
1570         * set individual interrupt enables (without GIRQ1)
1571         * but don't global enable until zoran_open()
1572         */
1573        zr36057_init_vfe(zr);
1574
1575        zr36057_enable_jpg(zr, BUZ_MODE_IDLE);
1576
1577        btwrite(IRQ_MASK, ZR36057_ISR); // Clears interrupts
1578}
1579
1580void
1581zr36057_restart (struct zoran *zr)
1582{
1583        btwrite(0, ZR36057_SPGPPCR);
1584        mdelay(1);
1585        btor(ZR36057_SPGPPCR_SoftReset, ZR36057_SPGPPCR);
1586        mdelay(1);
1587
1588        /* assert P_Reset */
1589        btwrite(0, ZR36057_JPC);
1590        /* set up GPIO direction - all output */
1591        btwrite(ZR36057_SPGPPCR_SoftReset | 0, ZR36057_SPGPPCR);
1592
1593        /* set up GPIO pins and guest bus timing */
1594        btwrite((0x81 << 24) | 0x8888, ZR36057_GPPGCR1);
1595}
1596
1597/*
1598 * initialize video front end
1599 */
1600
1601static void
1602zr36057_init_vfe (struct zoran *zr)
1603{
1604        u32 reg;
1605
1606        reg = btread(ZR36057_VFESPFR);
1607        reg |= ZR36057_VFESPFR_LittleEndian;
1608        reg &= ~ZR36057_VFESPFR_VCLKPol;
1609        reg |= ZR36057_VFESPFR_ExtFl;
1610        reg |= ZR36057_VFESPFR_TopField;
1611        btwrite(reg, ZR36057_VFESPFR);
1612        reg = btread(ZR36057_VDCR);
1613        if (pci_pci_problems & PCIPCI_TRITON)
1614                // || zr->revision < 1) // Revision 1 has also Triton support
1615                reg &= ~ZR36057_VDCR_Triton;
1616        else
1617                reg |= ZR36057_VDCR_Triton;
1618        btwrite(reg, ZR36057_VDCR);
1619}
1620