linux/drivers/usb/gadget/function/f_serial.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0+
   2/*
   3 * f_serial.c - generic USB serial function driver
   4 *
   5 * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
   6 * Copyright (C) 2008 by David Brownell
   7 * Copyright (C) 2008 by Nokia Corporation
   8 */
   9
  10#include <linux/slab.h>
  11#include <linux/kernel.h>
  12#include <linux/module.h>
  13#include <linux/device.h>
  14
  15#include "u_serial.h"
  16
  17
  18/*
  19 * This function packages a simple "generic serial" port with no real
  20 * control mechanisms, just raw data transfer over two bulk endpoints.
  21 *
  22 * Because it's not standardized, this isn't as interoperable as the
  23 * CDC ACM driver.  However, for many purposes it's just as functional
  24 * if you can arrange appropriate host side drivers.
  25 */
  26
  27struct f_gser {
  28        struct gserial                  port;
  29        u8                              data_id;
  30        u8                              port_num;
  31};
  32
  33static inline struct f_gser *func_to_gser(struct usb_function *f)
  34{
  35        return container_of(f, struct f_gser, port.func);
  36}
  37
  38/*-------------------------------------------------------------------------*/
  39
  40/* interface descriptor: */
  41
  42static struct usb_interface_descriptor gser_interface_desc = {
  43        .bLength =              USB_DT_INTERFACE_SIZE,
  44        .bDescriptorType =      USB_DT_INTERFACE,
  45        /* .bInterfaceNumber = DYNAMIC */
  46        .bNumEndpoints =        2,
  47        .bInterfaceClass =      USB_CLASS_VENDOR_SPEC,
  48        .bInterfaceSubClass =   0,
  49        .bInterfaceProtocol =   0,
  50        /* .iInterface = DYNAMIC */
  51};
  52
  53/* full speed support: */
  54
  55static struct usb_endpoint_descriptor gser_fs_in_desc = {
  56        .bLength =              USB_DT_ENDPOINT_SIZE,
  57        .bDescriptorType =      USB_DT_ENDPOINT,
  58        .bEndpointAddress =     USB_DIR_IN,
  59        .bmAttributes =         USB_ENDPOINT_XFER_BULK,
  60};
  61
  62static struct usb_endpoint_descriptor gser_fs_out_desc = {
  63        .bLength =              USB_DT_ENDPOINT_SIZE,
  64        .bDescriptorType =      USB_DT_ENDPOINT,
  65        .bEndpointAddress =     USB_DIR_OUT,
  66        .bmAttributes =         USB_ENDPOINT_XFER_BULK,
  67};
  68
  69static struct usb_descriptor_header *gser_fs_function[] = {
  70        (struct usb_descriptor_header *) &gser_interface_desc,
  71        (struct usb_descriptor_header *) &gser_fs_in_desc,
  72        (struct usb_descriptor_header *) &gser_fs_out_desc,
  73        NULL,
  74};
  75
  76/* high speed support: */
  77
  78static struct usb_endpoint_descriptor gser_hs_in_desc = {
  79        .bLength =              USB_DT_ENDPOINT_SIZE,
  80        .bDescriptorType =      USB_DT_ENDPOINT,
  81        .bmAttributes =         USB_ENDPOINT_XFER_BULK,
  82        .wMaxPacketSize =       cpu_to_le16(512),
  83};
  84
  85static struct usb_endpoint_descriptor gser_hs_out_desc = {
  86        .bLength =              USB_DT_ENDPOINT_SIZE,
  87        .bDescriptorType =      USB_DT_ENDPOINT,
  88        .bmAttributes =         USB_ENDPOINT_XFER_BULK,
  89        .wMaxPacketSize =       cpu_to_le16(512),
  90};
  91
  92static struct usb_descriptor_header *gser_hs_function[] = {
  93        (struct usb_descriptor_header *) &gser_interface_desc,
  94        (struct usb_descriptor_header *) &gser_hs_in_desc,
  95        (struct usb_descriptor_header *) &gser_hs_out_desc,
  96        NULL,
  97};
  98
  99static struct usb_endpoint_descriptor gser_ss_in_desc = {
 100        .bLength =              USB_DT_ENDPOINT_SIZE,
 101        .bDescriptorType =      USB_DT_ENDPOINT,
 102        .bmAttributes =         USB_ENDPOINT_XFER_BULK,
 103        .wMaxPacketSize =       cpu_to_le16(1024),
 104};
 105
 106static struct usb_endpoint_descriptor gser_ss_out_desc = {
 107        .bLength =              USB_DT_ENDPOINT_SIZE,
 108        .bDescriptorType =      USB_DT_ENDPOINT,
 109        .bmAttributes =         USB_ENDPOINT_XFER_BULK,
 110        .wMaxPacketSize =       cpu_to_le16(1024),
 111};
 112
 113static struct usb_ss_ep_comp_descriptor gser_ss_bulk_comp_desc = {
 114        .bLength =              sizeof gser_ss_bulk_comp_desc,
 115        .bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
 116};
 117
 118static struct usb_descriptor_header *gser_ss_function[] = {
 119        (struct usb_descriptor_header *) &gser_interface_desc,
 120        (struct usb_descriptor_header *) &gser_ss_in_desc,
 121        (struct usb_descriptor_header *) &gser_ss_bulk_comp_desc,
 122        (struct usb_descriptor_header *) &gser_ss_out_desc,
 123        (struct usb_descriptor_header *) &gser_ss_bulk_comp_desc,
 124        NULL,
 125};
 126
 127/* string descriptors: */
 128
 129static struct usb_string gser_string_defs[] = {
 130        [0].s = "Generic Serial",
 131        {  } /* end of list */
 132};
 133
 134static struct usb_gadget_strings gser_string_table = {
 135        .language =             0x0409, /* en-us */
 136        .strings =              gser_string_defs,
 137};
 138
 139static struct usb_gadget_strings *gser_strings[] = {
 140        &gser_string_table,
 141        NULL,
 142};
 143
 144/*-------------------------------------------------------------------------*/
 145
 146static int gser_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 147{
 148        struct f_gser           *gser = func_to_gser(f);
 149        struct usb_composite_dev *cdev = f->config->cdev;
 150
 151        /* we know alt == 0, so this is an activation or a reset */
 152
 153        if (gser->port.in->enabled) {
 154                dev_dbg(&cdev->gadget->dev,
 155                        "reset generic ttyGS%d\n", gser->port_num);
 156                gserial_disconnect(&gser->port);
 157        }
 158        if (!gser->port.in->desc || !gser->port.out->desc) {
 159                dev_dbg(&cdev->gadget->dev,
 160                        "activate generic ttyGS%d\n", gser->port_num);
 161                if (config_ep_by_speed(cdev->gadget, f, gser->port.in) ||
 162                    config_ep_by_speed(cdev->gadget, f, gser->port.out)) {
 163                        gser->port.in->desc = NULL;
 164                        gser->port.out->desc = NULL;
 165                        return -EINVAL;
 166                }
 167        }
 168        gserial_connect(&gser->port, gser->port_num);
 169        return 0;
 170}
 171
 172static void gser_disable(struct usb_function *f)
 173{
 174        struct f_gser   *gser = func_to_gser(f);
 175        struct usb_composite_dev *cdev = f->config->cdev;
 176
 177        dev_dbg(&cdev->gadget->dev,
 178                "generic ttyGS%d deactivated\n", gser->port_num);
 179        gserial_disconnect(&gser->port);
 180}
 181
 182/*-------------------------------------------------------------------------*/
 183
 184/* serial function driver setup/binding */
 185
 186static int gser_bind(struct usb_configuration *c, struct usb_function *f)
 187{
 188        struct usb_composite_dev *cdev = c->cdev;
 189        struct f_gser           *gser = func_to_gser(f);
 190        int                     status;
 191        struct usb_ep           *ep;
 192
 193        /* REVISIT might want instance-specific strings to help
 194         * distinguish instances ...
 195         */
 196
 197        /* maybe allocate device-global string ID */
 198        if (gser_string_defs[0].id == 0) {
 199                status = usb_string_id(c->cdev);
 200                if (status < 0)
 201                        return status;
 202                gser_string_defs[0].id = status;
 203        }
 204
 205        /* allocate instance-specific interface IDs */
 206        status = usb_interface_id(c, f);
 207        if (status < 0)
 208                goto fail;
 209        gser->data_id = status;
 210        gser_interface_desc.bInterfaceNumber = status;
 211
 212        status = -ENODEV;
 213
 214        /* allocate instance-specific endpoints */
 215        ep = usb_ep_autoconfig(cdev->gadget, &gser_fs_in_desc);
 216        if (!ep)
 217                goto fail;
 218        gser->port.in = ep;
 219
 220        ep = usb_ep_autoconfig(cdev->gadget, &gser_fs_out_desc);
 221        if (!ep)
 222                goto fail;
 223        gser->port.out = ep;
 224
 225        /* support all relevant hardware speeds... we expect that when
 226         * hardware is dual speed, all bulk-capable endpoints work at
 227         * both speeds
 228         */
 229        gser_hs_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress;
 230        gser_hs_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress;
 231
 232        gser_ss_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress;
 233        gser_ss_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress;
 234
 235        status = usb_assign_descriptors(f, gser_fs_function, gser_hs_function,
 236                        gser_ss_function, NULL);
 237        if (status)
 238                goto fail;
 239        dev_dbg(&cdev->gadget->dev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n",
 240                gser->port_num,
 241                gadget_is_superspeed(c->cdev->gadget) ? "super" :
 242                gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
 243                gser->port.in->name, gser->port.out->name);
 244        return 0;
 245
 246fail:
 247        ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
 248
 249        return status;
 250}
 251
 252static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item)
 253{
 254        return container_of(to_config_group(item), struct f_serial_opts,
 255                            func_inst.group);
 256}
 257
 258static void serial_attr_release(struct config_item *item)
 259{
 260        struct f_serial_opts *opts = to_f_serial_opts(item);
 261
 262        usb_put_function_instance(&opts->func_inst);
 263}
 264
 265static struct configfs_item_operations serial_item_ops = {
 266        .release        = serial_attr_release,
 267};
 268
 269static ssize_t f_serial_port_num_show(struct config_item *item, char *page)
 270{
 271        return sprintf(page, "%u\n", to_f_serial_opts(item)->port_num);
 272}
 273
 274CONFIGFS_ATTR_RO(f_serial_, port_num);
 275
 276static struct configfs_attribute *acm_attrs[] = {
 277        &f_serial_attr_port_num,
 278        NULL,
 279};
 280
 281static const struct config_item_type serial_func_type = {
 282        .ct_item_ops    = &serial_item_ops,
 283        .ct_attrs       = acm_attrs,
 284        .ct_owner       = THIS_MODULE,
 285};
 286
 287static void gser_free_inst(struct usb_function_instance *f)
 288{
 289        struct f_serial_opts *opts;
 290
 291        opts = container_of(f, struct f_serial_opts, func_inst);
 292        gserial_free_line(opts->port_num);
 293        kfree(opts);
 294}
 295
 296static struct usb_function_instance *gser_alloc_inst(void)
 297{
 298        struct f_serial_opts *opts;
 299        int ret;
 300
 301        opts = kzalloc(sizeof(*opts), GFP_KERNEL);
 302        if (!opts)
 303                return ERR_PTR(-ENOMEM);
 304
 305        opts->func_inst.free_func_inst = gser_free_inst;
 306        ret = gserial_alloc_line(&opts->port_num);
 307        if (ret) {
 308                kfree(opts);
 309                return ERR_PTR(ret);
 310        }
 311        config_group_init_type_name(&opts->func_inst.group, "",
 312                                    &serial_func_type);
 313
 314        return &opts->func_inst;
 315}
 316
 317static void gser_free(struct usb_function *f)
 318{
 319        struct f_gser *serial;
 320
 321        serial = func_to_gser(f);
 322        kfree(serial);
 323}
 324
 325static void gser_unbind(struct usb_configuration *c, struct usb_function *f)
 326{
 327        usb_free_all_descriptors(f);
 328}
 329
 330static struct usb_function *gser_alloc(struct usb_function_instance *fi)
 331{
 332        struct f_gser   *gser;
 333        struct f_serial_opts *opts;
 334
 335        /* allocate and initialize one new instance */
 336        gser = kzalloc(sizeof(*gser), GFP_KERNEL);
 337        if (!gser)
 338                return ERR_PTR(-ENOMEM);
 339
 340        opts = container_of(fi, struct f_serial_opts, func_inst);
 341
 342        gser->port_num = opts->port_num;
 343
 344        gser->port.func.name = "gser";
 345        gser->port.func.strings = gser_strings;
 346        gser->port.func.bind = gser_bind;
 347        gser->port.func.unbind = gser_unbind;
 348        gser->port.func.set_alt = gser_set_alt;
 349        gser->port.func.disable = gser_disable;
 350        gser->port.func.free_func = gser_free;
 351
 352        return &gser->port.func;
 353}
 354
 355DECLARE_USB_FUNCTION_INIT(gser, gser_alloc_inst, gser_alloc);
 356MODULE_LICENSE("GPL");
 357MODULE_AUTHOR("Al Borchers");
 358MODULE_AUTHOR("David Brownell");
 359