linux/drivers/usb/typec/mux/pi3usb30532.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0+
   2/*
   3 * Pericom PI3USB30532 Type-C cross switch / mux driver
   4 *
   5 * Copyright (c) 2017-2018 Hans de Goede <hdegoede@redhat.com>
   6 */
   7
   8#include <linux/i2c.h>
   9#include <linux/kernel.h>
  10#include <linux/module.h>
  11#include <linux/mutex.h>
  12#include <linux/usb/typec_dp.h>
  13#include <linux/usb/typec_mux.h>
  14
  15#define PI3USB30532_CONF                        0x00
  16
  17#define PI3USB30532_CONF_OPEN                   0x00
  18#define PI3USB30532_CONF_SWAP                   0x01
  19#define PI3USB30532_CONF_4LANE_DP               0x02
  20#define PI3USB30532_CONF_USB3                   0x04
  21#define PI3USB30532_CONF_USB3_AND_2LANE_DP      0x06
  22
  23struct pi3usb30532 {
  24        struct i2c_client *client;
  25        struct mutex lock; /* protects the cached conf register */
  26        struct typec_switch sw;
  27        struct typec_mux mux;
  28        u8 conf;
  29};
  30
  31static int pi3usb30532_set_conf(struct pi3usb30532 *pi, u8 new_conf)
  32{
  33        int ret = 0;
  34
  35        if (pi->conf == new_conf)
  36                return 0;
  37
  38        ret = i2c_smbus_write_byte_data(pi->client, PI3USB30532_CONF, new_conf);
  39        if (ret) {
  40                dev_err(&pi->client->dev, "Error writing conf: %d\n", ret);
  41                return ret;
  42        }
  43
  44        pi->conf = new_conf;
  45        return 0;
  46}
  47
  48static int pi3usb30532_sw_set(struct typec_switch *sw,
  49                              enum typec_orientation orientation)
  50{
  51        struct pi3usb30532 *pi = container_of(sw, struct pi3usb30532, sw);
  52        u8 new_conf;
  53        int ret;
  54
  55        mutex_lock(&pi->lock);
  56        new_conf = pi->conf;
  57
  58        switch (orientation) {
  59        case TYPEC_ORIENTATION_NONE:
  60                new_conf = PI3USB30532_CONF_OPEN;
  61                break;
  62        case TYPEC_ORIENTATION_NORMAL:
  63                new_conf &= ~PI3USB30532_CONF_SWAP;
  64                break;
  65        case TYPEC_ORIENTATION_REVERSE:
  66                new_conf |= PI3USB30532_CONF_SWAP;
  67                break;
  68        }
  69
  70        ret = pi3usb30532_set_conf(pi, new_conf);
  71        mutex_unlock(&pi->lock);
  72
  73        return ret;
  74}
  75
  76static int pi3usb30532_mux_set(struct typec_mux *mux, int state)
  77{
  78        struct pi3usb30532 *pi = container_of(mux, struct pi3usb30532, mux);
  79        u8 new_conf;
  80        int ret;
  81
  82        mutex_lock(&pi->lock);
  83        new_conf = pi->conf;
  84
  85        switch (state) {
  86        case TYPEC_STATE_SAFE:
  87                new_conf = PI3USB30532_CONF_OPEN;
  88                break;
  89        case TYPEC_STATE_USB:
  90                new_conf = (new_conf & PI3USB30532_CONF_SWAP) |
  91                           PI3USB30532_CONF_USB3;
  92                break;
  93        case TYPEC_DP_STATE_C:
  94        case TYPEC_DP_STATE_E:
  95                new_conf = (new_conf & PI3USB30532_CONF_SWAP) |
  96                           PI3USB30532_CONF_4LANE_DP;
  97                break;
  98        case TYPEC_DP_STATE_D:
  99                new_conf = (new_conf & PI3USB30532_CONF_SWAP) |
 100                           PI3USB30532_CONF_USB3_AND_2LANE_DP;
 101                break;
 102        default:
 103                break;
 104        }
 105
 106        ret = pi3usb30532_set_conf(pi, new_conf);
 107        mutex_unlock(&pi->lock);
 108
 109        return ret;
 110}
 111
 112static int pi3usb30532_probe(struct i2c_client *client)
 113{
 114        struct device *dev = &client->dev;
 115        struct pi3usb30532 *pi;
 116        int ret;
 117
 118        pi = devm_kzalloc(dev, sizeof(*pi), GFP_KERNEL);
 119        if (!pi)
 120                return -ENOMEM;
 121
 122        pi->client = client;
 123        pi->sw.dev = dev;
 124        pi->sw.set = pi3usb30532_sw_set;
 125        pi->mux.dev = dev;
 126        pi->mux.set = pi3usb30532_mux_set;
 127        mutex_init(&pi->lock);
 128
 129        ret = i2c_smbus_read_byte_data(client, PI3USB30532_CONF);
 130        if (ret < 0) {
 131                dev_err(dev, "Error reading config register %d\n", ret);
 132                return ret;
 133        }
 134        pi->conf = ret;
 135
 136        ret = typec_switch_register(&pi->sw);
 137        if (ret) {
 138                dev_err(dev, "Error registering typec switch: %d\n", ret);
 139                return ret;
 140        }
 141
 142        ret = typec_mux_register(&pi->mux);
 143        if (ret) {
 144                typec_switch_unregister(&pi->sw);
 145                dev_err(dev, "Error registering typec mux: %d\n", ret);
 146                return ret;
 147        }
 148
 149        i2c_set_clientdata(client, pi);
 150        return 0;
 151}
 152
 153static int pi3usb30532_remove(struct i2c_client *client)
 154{
 155        struct pi3usb30532 *pi = i2c_get_clientdata(client);
 156
 157        typec_mux_unregister(&pi->mux);
 158        typec_switch_unregister(&pi->sw);
 159        return 0;
 160}
 161
 162static const struct i2c_device_id pi3usb30532_table[] = {
 163        { "pi3usb30532" },
 164        { }
 165};
 166MODULE_DEVICE_TABLE(i2c, pi3usb30532_table);
 167
 168static struct i2c_driver pi3usb30532_driver = {
 169        .driver = {
 170                .name = "pi3usb30532",
 171        },
 172        .probe_new      = pi3usb30532_probe,
 173        .remove         = pi3usb30532_remove,
 174        .id_table       = pi3usb30532_table,
 175};
 176
 177module_i2c_driver(pi3usb30532_driver);
 178
 179MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
 180MODULE_DESCRIPTION("Pericom PI3USB30532 Type-C mux driver");
 181MODULE_LICENSE("GPL");
 182