linux/include/linux/ethtool.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0 */
   2/*
   3 * ethtool.h: Defines for Linux ethtool.
   4 *
   5 * Copyright (C) 1998 David S. Miller (davem@redhat.com)
   6 * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
   7 * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
   8 * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
   9 *                                christopher.leech@intel.com,
  10 *                                scott.feldman@intel.com)
  11 * Portions Copyright (C) Sun Microsystems 2008
  12 */
  13#ifndef _LINUX_ETHTOOL_H
  14#define _LINUX_ETHTOOL_H
  15
  16#include <linux/bitmap.h>
  17#include <linux/compat.h>
  18#include <uapi/linux/ethtool.h>
  19
  20#ifdef CONFIG_COMPAT
  21
  22struct compat_ethtool_rx_flow_spec {
  23        u32             flow_type;
  24        union ethtool_flow_union h_u;
  25        struct ethtool_flow_ext h_ext;
  26        union ethtool_flow_union m_u;
  27        struct ethtool_flow_ext m_ext;
  28        compat_u64      ring_cookie;
  29        u32             location;
  30};
  31
  32struct compat_ethtool_rxnfc {
  33        u32                             cmd;
  34        u32                             flow_type;
  35        compat_u64                      data;
  36        struct compat_ethtool_rx_flow_spec fs;
  37        u32                             rule_cnt;
  38        u32                             rule_locs[0];
  39};
  40
  41#endif /* CONFIG_COMPAT */
  42
  43#include <linux/rculist.h>
  44
  45/**
  46 * enum ethtool_phys_id_state - indicator state for physical identification
  47 * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
  48 * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
  49 * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
  50 *      is not supported)
  51 * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
  52 *      is not supported)
  53 */
  54enum ethtool_phys_id_state {
  55        ETHTOOL_ID_INACTIVE,
  56        ETHTOOL_ID_ACTIVE,
  57        ETHTOOL_ID_ON,
  58        ETHTOOL_ID_OFF
  59};
  60
  61enum {
  62        ETH_RSS_HASH_TOP_BIT, /* Configurable RSS hash function - Toeplitz */
  63        ETH_RSS_HASH_XOR_BIT, /* Configurable RSS hash function - Xor */
  64        ETH_RSS_HASH_CRC32_BIT, /* Configurable RSS hash function - Crc32 */
  65
  66        /*
  67         * Add your fresh new hash function bits above and remember to update
  68         * rss_hash_func_strings[] in ethtool.c
  69         */
  70        ETH_RSS_HASH_FUNCS_COUNT
  71};
  72
  73#define __ETH_RSS_HASH_BIT(bit) ((u32)1 << (bit))
  74#define __ETH_RSS_HASH(name)    __ETH_RSS_HASH_BIT(ETH_RSS_HASH_##name##_BIT)
  75
  76#define ETH_RSS_HASH_TOP        __ETH_RSS_HASH(TOP)
  77#define ETH_RSS_HASH_XOR        __ETH_RSS_HASH(XOR)
  78#define ETH_RSS_HASH_CRC32      __ETH_RSS_HASH(CRC32)
  79
  80#define ETH_RSS_HASH_UNKNOWN    0
  81#define ETH_RSS_HASH_NO_CHANGE  0
  82
  83struct net_device;
  84
  85/* Some generic methods drivers may use in their ethtool_ops */
  86u32 ethtool_op_get_link(struct net_device *dev);
  87int ethtool_op_get_ts_info(struct net_device *dev, struct ethtool_ts_info *eti);
  88
  89/**
  90 * ethtool_rxfh_indir_default - get default value for RX flow hash indirection
  91 * @index: Index in RX flow hash indirection table
  92 * @n_rx_rings: Number of RX rings to use
  93 *
  94 * This function provides the default policy for RX flow hash indirection.
  95 */
  96static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
  97{
  98        return index % n_rx_rings;
  99}
 100
 101/* declare a link mode bitmap */
 102#define __ETHTOOL_DECLARE_LINK_MODE_MASK(name)          \
 103        DECLARE_BITMAP(name, __ETHTOOL_LINK_MODE_MASK_NBITS)
 104
 105/* drivers must ignore base.cmd and base.link_mode_masks_nwords
 106 * fields, but they are allowed to overwrite them (will be ignored).
 107 */
 108struct ethtool_link_ksettings {
 109        struct ethtool_link_settings base;
 110        struct {
 111                __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
 112                __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
 113                __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
 114        } link_modes;
 115};
 116
 117/**
 118 * ethtool_link_ksettings_zero_link_mode - clear link_ksettings link mode mask
 119 *   @ptr : pointer to struct ethtool_link_ksettings
 120 *   @name : one of supported/advertising/lp_advertising
 121 */
 122#define ethtool_link_ksettings_zero_link_mode(ptr, name)                \
 123        bitmap_zero((ptr)->link_modes.name, __ETHTOOL_LINK_MODE_MASK_NBITS)
 124
 125/**
 126 * ethtool_link_ksettings_add_link_mode - set bit in link_ksettings
 127 * link mode mask
 128 *   @ptr : pointer to struct ethtool_link_ksettings
 129 *   @name : one of supported/advertising/lp_advertising
 130 *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
 131 * (not atomic, no bound checking)
 132 */
 133#define ethtool_link_ksettings_add_link_mode(ptr, name, mode)           \
 134        __set_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
 135
 136/**
 137 * ethtool_link_ksettings_del_link_mode - clear bit in link_ksettings
 138 * link mode mask
 139 *   @ptr : pointer to struct ethtool_link_ksettings
 140 *   @name : one of supported/advertising/lp_advertising
 141 *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
 142 * (not atomic, no bound checking)
 143 */
 144#define ethtool_link_ksettings_del_link_mode(ptr, name, mode)           \
 145        __clear_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
 146
 147/**
 148 * ethtool_link_ksettings_test_link_mode - test bit in ksettings link mode mask
 149 *   @ptr : pointer to struct ethtool_link_ksettings
 150 *   @name : one of supported/advertising/lp_advertising
 151 *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
 152 * (not atomic, no bound checking)
 153 *
 154 * Returns true/false.
 155 */
 156#define ethtool_link_ksettings_test_link_mode(ptr, name, mode)          \
 157        test_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
 158
 159extern int
 160__ethtool_get_link_ksettings(struct net_device *dev,
 161                             struct ethtool_link_ksettings *link_ksettings);
 162
 163/**
 164 * ethtool_intersect_link_masks - Given two link masks, AND them together
 165 * @dst: first mask and where result is stored
 166 * @src: second mask to intersect with
 167 *
 168 * Given two link mode masks, AND them together and save the result in dst.
 169 */
 170void ethtool_intersect_link_masks(struct ethtool_link_ksettings *dst,
 171                                  struct ethtool_link_ksettings *src);
 172
 173void ethtool_convert_legacy_u32_to_link_mode(unsigned long *dst,
 174                                             u32 legacy_u32);
 175
 176/* return false if src had higher bits set. lower bits always updated. */
 177bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
 178                                     const unsigned long *src);
 179
 180/**
 181 * struct ethtool_ops - optional netdev operations
 182 * @get_drvinfo: Report driver/device information.  Should only set the
 183 *      @driver, @version, @fw_version and @bus_info fields.  If not
 184 *      implemented, the @driver and @bus_info fields will be filled in
 185 *      according to the netdev's parent device.
 186 * @get_regs_len: Get buffer length required for @get_regs
 187 * @get_regs: Get device registers
 188 * @get_wol: Report whether Wake-on-Lan is enabled
 189 * @set_wol: Turn Wake-on-Lan on or off.  Returns a negative error code
 190 *      or zero.
 191 * @get_msglevel: Report driver message level.  This should be the value
 192 *      of the @msg_enable field used by netif logging functions.
 193 * @set_msglevel: Set driver message level
 194 * @nway_reset: Restart autonegotiation.  Returns a negative error code
 195 *      or zero.
 196 * @get_link: Report whether physical link is up.  Will only be called if
 197 *      the netdev is up.  Should usually be set to ethtool_op_get_link(),
 198 *      which uses netif_carrier_ok().
 199 * @get_eeprom: Read data from the device EEPROM.
 200 *      Should fill in the magic field.  Don't need to check len for zero
 201 *      or wraparound.  Fill in the data argument with the eeprom values
 202 *      from offset to offset + len.  Update len to the amount read.
 203 *      Returns an error or zero.
 204 * @set_eeprom: Write data to the device EEPROM.
 205 *      Should validate the magic field.  Don't need to check len for zero
 206 *      or wraparound.  Update len to the amount written.  Returns an error
 207 *      or zero.
 208 * @get_coalesce: Get interrupt coalescing parameters.  Returns a negative
 209 *      error code or zero.
 210 * @set_coalesce: Set interrupt coalescing parameters.  Returns a negative
 211 *      error code or zero.
 212 * @get_ringparam: Report ring sizes
 213 * @set_ringparam: Set ring sizes.  Returns a negative error code or zero.
 214 * @get_pauseparam: Report pause parameters
 215 * @set_pauseparam: Set pause parameters.  Returns a negative error code
 216 *      or zero.
 217 * @self_test: Run specified self-tests
 218 * @get_strings: Return a set of strings that describe the requested objects
 219 * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
 220 *      attached to it.  The implementation may update the indicator
 221 *      asynchronously or synchronously, but in either case it must return
 222 *      quickly.  It is initially called with the argument %ETHTOOL_ID_ACTIVE,
 223 *      and must either activate asynchronous updates and return zero, return
 224 *      a negative error or return a positive frequency for synchronous
 225 *      indication (e.g. 1 for one on/off cycle per second).  If it returns
 226 *      a frequency then it will be called again at intervals with the
 227 *      argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
 228 *      the indicator accordingly.  Finally, it is called with the argument
 229 *      %ETHTOOL_ID_INACTIVE and must deactivate the indicator.  Returns a
 230 *      negative error code or zero.
 231 * @get_ethtool_stats: Return extended statistics about the device.
 232 *      This is only useful if the device maintains statistics not
 233 *      included in &struct rtnl_link_stats64.
 234 * @begin: Function to be called before any other operation.  Returns a
 235 *      negative error code or zero.
 236 * @complete: Function to be called after any other operation except
 237 *      @begin.  Will be called even if the other operation failed.
 238 * @get_priv_flags: Report driver-specific feature flags.
 239 * @set_priv_flags: Set driver-specific feature flags.  Returns a negative
 240 *      error code or zero.
 241 * @get_sset_count: Get number of strings that @get_strings will write.
 242 * @get_rxnfc: Get RX flow classification rules.  Returns a negative
 243 *      error code or zero.
 244 * @set_rxnfc: Set RX flow classification rules.  Returns a negative
 245 *      error code or zero.
 246 * @flash_device: Write a firmware image to device's flash memory.
 247 *      Returns a negative error code or zero.
 248 * @reset: Reset (part of) the device, as specified by a bitmask of
 249 *      flags from &enum ethtool_reset_flags.  Returns a negative
 250 *      error code or zero.
 251 * @get_rxfh_key_size: Get the size of the RX flow hash key.
 252 *      Returns zero if not supported for this specific device.
 253 * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table.
 254 *      Returns zero if not supported for this specific device.
 255 * @get_rxfh: Get the contents of the RX flow hash indirection table, hash key
 256 *      and/or hash function.
 257 *      Returns a negative error code or zero.
 258 * @set_rxfh: Set the contents of the RX flow hash indirection table, hash
 259 *      key, and/or hash function.  Arguments which are set to %NULL or zero
 260 *      will remain unchanged.
 261 *      Returns a negative error code or zero. An error code must be returned
 262 *      if at least one unsupported change was requested.
 263 * @get_channels: Get number of channels.
 264 * @set_channels: Set number of channels.  Returns a negative error code or
 265 *      zero.
 266 * @get_dump_flag: Get dump flag indicating current dump length, version,
 267 *                 and flag of the device.
 268 * @get_dump_data: Get dump data.
 269 * @set_dump: Set dump specific flags to the device.
 270 * @get_ts_info: Get the time stamping and PTP hardware clock capabilities.
 271 *      Drivers supporting transmit time stamps in software should set this to
 272 *      ethtool_op_get_ts_info().
 273 * @get_module_info: Get the size and type of the eeprom contained within
 274 *      a plug-in module.
 275 * @get_module_eeprom: Get the eeprom information from the plug-in module
 276 * @get_eee: Get Energy-Efficient (EEE) supported and status.
 277 * @set_eee: Set EEE status (enable/disable) as well as LPI timers.
 278 * @get_per_queue_coalesce: Get interrupt coalescing parameters per queue.
 279 *      It must check that the given queue number is valid. If neither a RX nor
 280 *      a TX queue has this number, return -EINVAL. If only a RX queue or a TX
 281 *      queue has this number, set the inapplicable fields to ~0 and return 0.
 282 *      Returns a negative error code or zero.
 283 * @set_per_queue_coalesce: Set interrupt coalescing parameters per queue.
 284 *      It must check that the given queue number is valid. If neither a RX nor
 285 *      a TX queue has this number, return -EINVAL. If only a RX queue or a TX
 286 *      queue has this number, ignore the inapplicable fields.
 287 *      Returns a negative error code or zero.
 288 * @get_link_ksettings: Get various device settings including Ethernet link
 289 *      settings. The %cmd and %link_mode_masks_nwords fields should be
 290 *      ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter),
 291 *      any change to them will be overwritten by kernel. Returns a negative
 292 *      error code or zero.
 293 * @set_link_ksettings: Set various device settings including Ethernet link
 294 *      settings. The %cmd and %link_mode_masks_nwords fields should be
 295 *      ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter),
 296 *      any change to them will be overwritten by kernel. Returns a negative
 297 *      error code or zero.
 298 * @get_fecparam: Get the network device Forward Error Correction parameters.
 299 * @set_fecparam: Set the network device Forward Error Correction parameters.
 300 * @get_ethtool_phy_stats: Return extended statistics about the PHY device.
 301 *      This is only useful if the device maintains PHY statistics and
 302 *      cannot use the standard PHY library helpers.
 303 *
 304 * All operations are optional (i.e. the function pointer may be set
 305 * to %NULL) and callers must take this into account.  Callers must
 306 * hold the RTNL lock.
 307 *
 308 * See the structures used by these operations for further documentation.
 309 * Note that for all operations using a structure ending with a zero-
 310 * length array, the array is allocated separately in the kernel and
 311 * is passed to the driver as an additional parameter.
 312 *
 313 * See &struct net_device and &struct net_device_ops for documentation
 314 * of the generic netdev features interface.
 315 */
 316struct ethtool_ops {
 317        void    (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
 318        int     (*get_regs_len)(struct net_device *);
 319        void    (*get_regs)(struct net_device *, struct ethtool_regs *, void *);
 320        void    (*get_wol)(struct net_device *, struct ethtool_wolinfo *);
 321        int     (*set_wol)(struct net_device *, struct ethtool_wolinfo *);
 322        u32     (*get_msglevel)(struct net_device *);
 323        void    (*set_msglevel)(struct net_device *, u32);
 324        int     (*nway_reset)(struct net_device *);
 325        u32     (*get_link)(struct net_device *);
 326        int     (*get_eeprom_len)(struct net_device *);
 327        int     (*get_eeprom)(struct net_device *,
 328                              struct ethtool_eeprom *, u8 *);
 329        int     (*set_eeprom)(struct net_device *,
 330                              struct ethtool_eeprom *, u8 *);
 331        int     (*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
 332        int     (*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
 333        void    (*get_ringparam)(struct net_device *,
 334                                 struct ethtool_ringparam *);
 335        int     (*set_ringparam)(struct net_device *,
 336                                 struct ethtool_ringparam *);
 337        void    (*get_pauseparam)(struct net_device *,
 338                                  struct ethtool_pauseparam*);
 339        int     (*set_pauseparam)(struct net_device *,
 340                                  struct ethtool_pauseparam*);
 341        void    (*self_test)(struct net_device *, struct ethtool_test *, u64 *);
 342        void    (*get_strings)(struct net_device *, u32 stringset, u8 *);
 343        int     (*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
 344        void    (*get_ethtool_stats)(struct net_device *,
 345                                     struct ethtool_stats *, u64 *);
 346        int     (*begin)(struct net_device *);
 347        void    (*complete)(struct net_device *);
 348        u32     (*get_priv_flags)(struct net_device *);
 349        int     (*set_priv_flags)(struct net_device *, u32);
 350        int     (*get_sset_count)(struct net_device *, int);
 351        int     (*get_rxnfc)(struct net_device *,
 352                             struct ethtool_rxnfc *, u32 *rule_locs);
 353        int     (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
 354        int     (*flash_device)(struct net_device *, struct ethtool_flash *);
 355        int     (*reset)(struct net_device *, u32 *);
 356        u32     (*get_rxfh_key_size)(struct net_device *);
 357        u32     (*get_rxfh_indir_size)(struct net_device *);
 358        int     (*get_rxfh)(struct net_device *, u32 *indir, u8 *key,
 359                            u8 *hfunc);
 360        int     (*set_rxfh)(struct net_device *, const u32 *indir,
 361                            const u8 *key, const u8 hfunc);
 362        int     (*get_rxfh_context)(struct net_device *, u32 *indir, u8 *key,
 363                                    u8 *hfunc, u32 rss_context);
 364        int     (*set_rxfh_context)(struct net_device *, const u32 *indir,
 365                                    const u8 *key, const u8 hfunc,
 366                                    u32 *rss_context, bool delete);
 367        void    (*get_channels)(struct net_device *, struct ethtool_channels *);
 368        int     (*set_channels)(struct net_device *, struct ethtool_channels *);
 369        int     (*get_dump_flag)(struct net_device *, struct ethtool_dump *);
 370        int     (*get_dump_data)(struct net_device *,
 371                                 struct ethtool_dump *, void *);
 372        int     (*set_dump)(struct net_device *, struct ethtool_dump *);
 373        int     (*get_ts_info)(struct net_device *, struct ethtool_ts_info *);
 374        int     (*get_module_info)(struct net_device *,
 375                                   struct ethtool_modinfo *);
 376        int     (*get_module_eeprom)(struct net_device *,
 377                                     struct ethtool_eeprom *, u8 *);
 378        int     (*get_eee)(struct net_device *, struct ethtool_eee *);
 379        int     (*set_eee)(struct net_device *, struct ethtool_eee *);
 380        int     (*get_tunable)(struct net_device *,
 381                               const struct ethtool_tunable *, void *);
 382        int     (*set_tunable)(struct net_device *,
 383                               const struct ethtool_tunable *, const void *);
 384        int     (*get_per_queue_coalesce)(struct net_device *, u32,
 385                                          struct ethtool_coalesce *);
 386        int     (*set_per_queue_coalesce)(struct net_device *, u32,
 387                                          struct ethtool_coalesce *);
 388        int     (*get_link_ksettings)(struct net_device *,
 389                                      struct ethtool_link_ksettings *);
 390        int     (*set_link_ksettings)(struct net_device *,
 391                                      const struct ethtool_link_ksettings *);
 392        int     (*get_fecparam)(struct net_device *,
 393                                      struct ethtool_fecparam *);
 394        int     (*set_fecparam)(struct net_device *,
 395                                      struct ethtool_fecparam *);
 396        void    (*get_ethtool_phy_stats)(struct net_device *,
 397                                         struct ethtool_stats *, u64 *);
 398};
 399
 400struct ethtool_rx_flow_rule {
 401        struct flow_rule        *rule;
 402        unsigned long           priv[0];
 403};
 404
 405struct ethtool_rx_flow_spec_input {
 406        const struct ethtool_rx_flow_spec       *fs;
 407        u32                                     rss_ctx;
 408};
 409
 410struct ethtool_rx_flow_rule *
 411ethtool_rx_flow_rule_create(const struct ethtool_rx_flow_spec_input *input);
 412void ethtool_rx_flow_rule_destroy(struct ethtool_rx_flow_rule *rule);
 413
 414#endif /* _LINUX_ETHTOOL_H */
 415