1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * arch/arm/mach-ixp4xx/include/mach/platform.h 4 * 5 * Constants and functions that are useful to IXP4xx platform-specific code 6 * and device drivers. 7 * 8 * Copyright (C) 2004 MontaVista Software, Inc. 9 */ 10 11#ifndef __ASM_ARCH_HARDWARE_H__ 12#error "Do not include this directly, instead #include <mach/hardware.h>" 13#endif 14 15#ifndef __ASSEMBLY__ 16 17#include <linux/reboot.h> 18#include <linux/platform_data/eth_ixp4xx.h> 19 20#include <asm/types.h> 21 22#ifndef __ARMEB__ 23#define REG_OFFSET 0 24#else 25#define REG_OFFSET 3 26#endif 27 28/* 29 * Expansion bus memory regions 30 */ 31#define IXP4XX_EXP_BUS_BASE_PHYS (0x50000000) 32 33/* 34 * The expansion bus on the IXP4xx can be configured for either 16 or 35 * 32MB windows and the CS offset for each region changes based on the 36 * current configuration. This means that we cannot simply hardcode 37 * each offset. ixp4xx_sys_init() looks at the expansion bus configuration 38 * as setup by the bootloader to determine our window size. 39 */ 40extern unsigned long ixp4xx_exp_bus_size; 41 42#define IXP4XX_EXP_BUS_BASE(region)\ 43 (IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size)) 44 45#define IXP4XX_EXP_BUS_END(region)\ 46 (IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1) 47 48/* Those macros can be used to adjust timing and configure 49 * other features for each region. 50 */ 51 52#define IXP4XX_EXP_BUS_RECOVERY_T(x) (((x) & 0x0f) << 16) 53#define IXP4XX_EXP_BUS_HOLD_T(x) (((x) & 0x03) << 20) 54#define IXP4XX_EXP_BUS_STROBE_T(x) (((x) & 0x0f) << 22) 55#define IXP4XX_EXP_BUS_SETUP_T(x) (((x) & 0x03) << 26) 56#define IXP4XX_EXP_BUS_ADDR_T(x) (((x) & 0x03) << 28) 57#define IXP4XX_EXP_BUS_SIZE(x) (((x) & 0x0f) << 10) 58#define IXP4XX_EXP_BUS_CYCLES(x) (((x) & 0x03) << 14) 59 60#define IXP4XX_EXP_BUS_CS_EN (1L << 31) 61#define IXP4XX_EXP_BUS_BYTE_RD16 (1L << 6) 62#define IXP4XX_EXP_BUS_HRDY_POL (1L << 5) 63#define IXP4XX_EXP_BUS_MUX_EN (1L << 4) 64#define IXP4XX_EXP_BUS_SPLT_EN (1L << 3) 65#define IXP4XX_EXP_BUS_WR_EN (1L << 1) 66#define IXP4XX_EXP_BUS_BYTE_EN (1L << 0) 67 68#define IXP4XX_EXP_BUS_CYCLES_INTEL 0x00 69#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA 0x01 70#define IXP4XX_EXP_BUS_CYCLES_HPI 0x02 71 72#define IXP4XX_FLASH_WRITABLE (0x2) 73#define IXP4XX_FLASH_DEFAULT (0xbcd23c40) 74#define IXP4XX_FLASH_WRITE (0xbcd23c42) 75 76/* 77 * Clock Speed Definitions. 78 */ 79#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66MHzi APB BUS */ 80#define IXP4XX_UART_XTAL 14745600 81 82/* 83 * This structure provide a means for the board setup code 84 * to give information to th pata_ixp4xx driver. It is 85 * passed as platform_data. 86 */ 87struct ixp4xx_pata_data { 88 volatile u32 *cs0_cfg; 89 volatile u32 *cs1_cfg; 90 unsigned long cs0_bits; 91 unsigned long cs1_bits; 92 void __iomem *cs0; 93 void __iomem *cs1; 94}; 95 96/* 97 * Frequency of clock used for primary clocksource 98 */ 99extern unsigned long ixp4xx_timer_freq; 100 101/* 102 * Functions used by platform-level setup code 103 */ 104extern void ixp4xx_map_io(void); 105extern void ixp4xx_init_early(void); 106extern void ixp4xx_init_irq(void); 107extern void ixp4xx_sys_init(void); 108extern void ixp4xx_timer_init(void); 109extern void ixp4xx_restart(enum reboot_mode, const char *); 110extern void ixp4xx_pci_preinit(void); 111struct pci_sys_data; 112extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); 113extern struct pci_ops ixp4xx_ops; 114 115#endif // __ASSEMBLY__ 116 117