1
2
3
4
5
6
7
8
9
10
11
12
13
14
15#include <linux/init.h>
16#include <linux/interrupt.h>
17#include <linux/delay.h>
18#include <linux/platform_device.h>
19#include <linux/clk.h>
20#include <linux/gpio/machine.h>
21#include <linux/spi/spi.h>
22#include <linux/spi/pxa2xx_spi.h>
23#include <linux/smc91x.h>
24#include <linux/i2c.h>
25#include <linux/leds.h>
26#include <linux/mfd/da903x.h>
27#include <linux/platform_data/max732x.h>
28#include <linux/platform_data/i2c-pxa.h>
29
30#include <asm/types.h>
31#include <asm/setup.h>
32#include <asm/memory.h>
33#include <asm/mach-types.h>
34#include <mach/hardware.h>
35#include <asm/irq.h>
36
37#include <asm/mach/arch.h>
38#include <asm/mach/map.h>
39#include <asm/mach/irq.h>
40
41#include "pxa300.h"
42#include "devices.h"
43#include <linux/platform_data/video-pxafb.h>
44#include <linux/platform_data/mmc-pxamci.h>
45#include <linux/platform_data/keypad-pxa27x.h>
46#include "littleton.h"
47#include <linux/platform_data/mtd-nand-pxa3xx.h>
48
49#include "generic.h"
50
51
52static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
53
54 GPIO54_LCD_LDD_0,
55 GPIO55_LCD_LDD_1,
56 GPIO56_LCD_LDD_2,
57 GPIO57_LCD_LDD_3,
58 GPIO58_LCD_LDD_4,
59 GPIO59_LCD_LDD_5,
60 GPIO60_LCD_LDD_6,
61 GPIO61_LCD_LDD_7,
62 GPIO62_LCD_LDD_8,
63 GPIO63_LCD_LDD_9,
64 GPIO64_LCD_LDD_10,
65 GPIO65_LCD_LDD_11,
66 GPIO66_LCD_LDD_12,
67 GPIO67_LCD_LDD_13,
68 GPIO68_LCD_LDD_14,
69 GPIO69_LCD_LDD_15,
70 GPIO70_LCD_LDD_16,
71 GPIO71_LCD_LDD_17,
72 GPIO72_LCD_FCLK,
73 GPIO73_LCD_LCLK,
74 GPIO74_LCD_PCLK,
75 GPIO75_LCD_BIAS,
76
77
78 GPIO25_SSP2_SCLK,
79 GPIO27_SSP2_TXD,
80 GPIO17_GPIO,
81
82
83 GPIO90_GPIO,
84
85
86 GPIO107_KP_DKIN_0,
87 GPIO108_KP_DKIN_1,
88 GPIO115_KP_MKIN_0,
89 GPIO116_KP_MKIN_1,
90 GPIO117_KP_MKIN_2,
91 GPIO118_KP_MKIN_3,
92 GPIO119_KP_MKIN_4,
93 GPIO120_KP_MKIN_5,
94 GPIO121_KP_MKOUT_0,
95 GPIO122_KP_MKOUT_1,
96 GPIO123_KP_MKOUT_2,
97 GPIO124_KP_MKOUT_3,
98 GPIO125_KP_MKOUT_4,
99
100
101 GPIO3_MMC1_DAT0,
102 GPIO4_MMC1_DAT1,
103 GPIO5_MMC1_DAT2,
104 GPIO6_MMC1_DAT3,
105 GPIO7_MMC1_CLK,
106 GPIO8_MMC1_CMD,
107 GPIO15_GPIO,
108
109
110 GPIO107_UART3_CTS,
111 GPIO108_UART3_RTS,
112 GPIO109_UART3_TXD,
113 GPIO110_UART3_RXD,
114};
115
116static struct resource smc91x_resources[] = {
117 [0] = {
118 .start = (LITTLETON_ETH_PHYS + 0x300),
119 .end = (LITTLETON_ETH_PHYS + 0xfffff),
120 .flags = IORESOURCE_MEM,
121 },
122 [1] = {
123 .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
124 .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
125 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
126 }
127};
128
129static struct smc91x_platdata littleton_smc91x_info = {
130 .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT |
131 SMC91X_NOWAIT | SMC91X_USE_DMA,
132};
133
134static struct platform_device smc91x_device = {
135 .name = "smc91x",
136 .id = 0,
137 .num_resources = ARRAY_SIZE(smc91x_resources),
138 .resource = smc91x_resources,
139 .dev = {
140 .platform_data = &littleton_smc91x_info,
141 },
142};
143
144#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
145static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
146 [0] = {
147
148 .pixclock = 38250,
149 .xres = 480,
150 .yres = 640,
151 .bpp = 16,
152 .hsync_len = 8,
153 .left_margin = 8,
154 .right_margin = 24,
155 .vsync_len = 2,
156 .upper_margin = 2,
157 .lower_margin = 4,
158 .sync = 0,
159 },
160 [1] = {
161
162 .pixclock = 153000,
163 .xres = 240,
164 .yres = 320,
165 .bpp = 16,
166 .hsync_len = 8,
167 .left_margin = 8,
168 .right_margin = 88,
169 .vsync_len = 2,
170 .upper_margin = 2,
171 .lower_margin = 2,
172 .sync = 0,
173 },
174};
175
176static struct pxafb_mach_info littleton_lcd_info = {
177 .modes = tpo_tdo24mtea1_modes,
178 .num_modes = 2,
179 .lcd_conn = LCD_COLOR_TFT_16BPP,
180};
181
182static void __init littleton_init_lcd(void)
183{
184 pxa_set_fb_info(NULL, &littleton_lcd_info);
185}
186#else
187static inline void littleton_init_lcd(void) {};
188#endif
189
190#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
191static struct pxa2xx_spi_controller littleton_spi_info = {
192 .num_chipselect = 1,
193};
194
195static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
196 .rx_threshold = 1,
197 .tx_threshold = 1,
198 .gpio_cs = LITTLETON_GPIO_LCD_CS,
199};
200
201static struct spi_board_info littleton_spi_devices[] __initdata = {
202 {
203 .modalias = "tdo24m",
204 .max_speed_hz = 1000000,
205 .bus_num = 2,
206 .chip_select = 0,
207 .controller_data= &littleton_tdo24m_chip,
208 },
209};
210
211static void __init littleton_init_spi(void)
212{
213 pxa2xx_set_spi_info(2, &littleton_spi_info);
214 spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
215}
216#else
217static inline void littleton_init_spi(void) {}
218#endif
219
220#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
221static const unsigned int littleton_matrix_key_map[] = {
222
223 KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
224 KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7),
225 KEY(1, 2, KEY_8), KEY(2, 2, KEY_9),
226
227 KEY(0, 3, KEY_KPASTERISK),
228 KEY(2, 3, KEY_KPDOT),
229
230 KEY(5, 4, KEY_ENTER),
231
232 KEY(5, 0, KEY_UP),
233 KEY(5, 1, KEY_DOWN),
234 KEY(5, 2, KEY_LEFT),
235 KEY(5, 3, KEY_RIGHT),
236 KEY(3, 2, KEY_HOME),
237 KEY(4, 1, KEY_END),
238 KEY(3, 3, KEY_BACK),
239
240 KEY(4, 0, KEY_SEND),
241 KEY(4, 2, KEY_VOLUMEUP),
242 KEY(4, 3, KEY_VOLUMEDOWN),
243
244 KEY(3, 0, KEY_F22),
245 KEY(3, 1, KEY_F23),
246};
247
248static struct matrix_keymap_data littleton_matrix_keymap_data = {
249 .keymap = littleton_matrix_key_map,
250 .keymap_size = ARRAY_SIZE(littleton_matrix_key_map),
251};
252
253static struct pxa27x_keypad_platform_data littleton_keypad_info = {
254 .matrix_key_rows = 6,
255 .matrix_key_cols = 5,
256 .matrix_keymap_data = &littleton_matrix_keymap_data,
257
258 .enable_rotary0 = 1,
259 .rotary0_up_key = KEY_UP,
260 .rotary0_down_key = KEY_DOWN,
261
262 .debounce_interval = 30,
263};
264static void __init littleton_init_keypad(void)
265{
266 pxa_set_keypad_info(&littleton_keypad_info);
267}
268#else
269static inline void littleton_init_keypad(void) {}
270#endif
271
272#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
273static struct pxamci_platform_data littleton_mci_platform_data = {
274 .detect_delay_ms = 200,
275 .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
276};
277
278static struct gpiod_lookup_table littleton_mci_gpio_table = {
279 .dev_id = "pxa2xx-mci.0",
280 .table = {
281
282 GPIO_LOOKUP("gpio-pxa", MFP_PIN_GPIO15,
283 "cd", GPIO_ACTIVE_LOW),
284 { },
285 },
286};
287
288static void __init littleton_init_mmc(void)
289{
290 gpiod_add_lookup_table(&littleton_mci_gpio_table);
291 pxa_set_mci_info(&littleton_mci_platform_data);
292}
293#else
294static inline void littleton_init_mmc(void) {}
295#endif
296
297#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
298static struct mtd_partition littleton_nand_partitions[] = {
299 [0] = {
300 .name = "Bootloader",
301 .offset = 0,
302 .size = 0x060000,
303 .mask_flags = MTD_WRITEABLE,
304 },
305 [1] = {
306 .name = "Kernel",
307 .offset = 0x060000,
308 .size = 0x200000,
309 .mask_flags = MTD_WRITEABLE,
310 },
311 [2] = {
312 .name = "Filesystem",
313 .offset = 0x0260000,
314 .size = 0x3000000,
315 },
316 [3] = {
317 .name = "MassStorage",
318 .offset = 0x3260000,
319 .size = 0x3d40000,
320 },
321 [4] = {
322 .name = "BBT",
323 .offset = 0x6FA0000,
324 .size = 0x80000,
325 .mask_flags = MTD_WRITEABLE,
326 },
327
328
329
330
331
332};
333
334static struct pxa3xx_nand_platform_data littleton_nand_info = {
335 .parts = littleton_nand_partitions,
336 .nr_parts = ARRAY_SIZE(littleton_nand_partitions),
337};
338
339static void __init littleton_init_nand(void)
340{
341 pxa3xx_set_nand_info(&littleton_nand_info);
342}
343#else
344static inline void littleton_init_nand(void) {}
345#endif
346
347#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
348static struct led_info littleton_da9034_leds[] = {
349 [0] = {
350 .name = "littleton:keypad1",
351 .flags = DA9034_LED_RAMP,
352 },
353 [1] = {
354 .name = "littleton:keypad2",
355 .flags = DA9034_LED_RAMP,
356 },
357 [2] = {
358 .name = "littleton:vibra",
359 .flags = 0,
360 },
361};
362
363static struct da9034_touch_pdata littleton_da9034_touch = {
364 .x_inverted = 1,
365 .interval_ms = 20,
366};
367
368static struct da903x_subdev_info littleton_da9034_subdevs[] = {
369 {
370 .name = "da903x-led",
371 .id = DA9034_ID_LED_1,
372 .platform_data = &littleton_da9034_leds[0],
373 }, {
374 .name = "da903x-led",
375 .id = DA9034_ID_LED_2,
376 .platform_data = &littleton_da9034_leds[1],
377 }, {
378 .name = "da903x-led",
379 .id = DA9034_ID_VIBRA,
380 .platform_data = &littleton_da9034_leds[2],
381 }, {
382 .name = "da903x-backlight",
383 .id = DA9034_ID_WLED,
384 }, {
385 .name = "da9034-touch",
386 .id = DA9034_ID_TOUCH,
387 .platform_data = &littleton_da9034_touch,
388 },
389};
390
391static struct da903x_platform_data littleton_da9034_info = {
392 .num_subdevs = ARRAY_SIZE(littleton_da9034_subdevs),
393 .subdevs = littleton_da9034_subdevs,
394};
395
396static struct max732x_platform_data littleton_max7320_info = {
397 .gpio_base = EXT0_GPIO_BASE,
398};
399
400static struct i2c_board_info littleton_i2c_info[] = {
401 [0] = {
402 .type = "da9034",
403 .addr = 0x34,
404 .platform_data = &littleton_da9034_info,
405 .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO18)),
406 },
407 [1] = {
408 .type = "max7320",
409 .addr = 0x50,
410 .platform_data = &littleton_max7320_info,
411 },
412};
413
414static void __init littleton_init_i2c(void)
415{
416 pxa_set_i2c_info(NULL);
417 i2c_register_board_info(0, ARRAY_AND_SIZE(littleton_i2c_info));
418}
419#else
420static inline void littleton_init_i2c(void) {}
421#endif
422
423static void __init littleton_init(void)
424{
425
426 pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
427
428 pxa_set_ffuart_info(NULL);
429 pxa_set_btuart_info(NULL);
430 pxa_set_stuart_info(NULL);
431
432
433
434
435
436 platform_device_register(&smc91x_device);
437
438 littleton_init_spi();
439 littleton_init_i2c();
440 littleton_init_mmc();
441 littleton_init_lcd();
442 littleton_init_keypad();
443 littleton_init_nand();
444}
445
446MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
447 .atag_offset = 0x100,
448 .map_io = pxa3xx_map_io,
449 .nr_irqs = LITTLETON_NR_IRQS,
450 .init_irq = pxa3xx_init_irq,
451 .handle_irq = pxa3xx_handle_irq,
452 .init_time = pxa_timer_init,
453 .init_machine = littleton_init,
454 .restart = pxa_restart,
455MACHINE_END
456
