LXR linux/drivers/pci/controller/Makefile

   1# SPDX-License-Identifier: GPL-2.0
   2obj-$(CONFIG_PCIE_CADENCE) += cadence/
   3obj-$(CONFIG_PCI_FTPCI100) += pci-ftpci100.o
   4obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
   5obj-$(CONFIG_PCI_HYPERV_INTERFACE) += pci-hyperv-intf.o
   6obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
   7obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
   8obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
   9obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
  10obj-$(CONFIG_PCIE_RCAR_HOST) += pcie-rcar.o pcie-rcar-host.o
  11obj-$(CONFIG_PCIE_RCAR_EP) += pcie-rcar.o pcie-rcar-ep.o
  12obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o
  13obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
  14obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
  15obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
  16obj-$(CONFIG_PCIE_XILINX_CPM) += pcie-xilinx-cpm.o
  17obj-$(CONFIG_PCI_V3_SEMI) += pci-v3-semi.o
  18obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
  19obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
  20obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
  21obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o
  22obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
  23obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
  24obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
  25obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
  26obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
  27obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o
  28obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
  29obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
  30obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
  31obj-$(CONFIG_VMD) += vmd.o
  32obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
  33obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o
  34obj-$(CONFIG_PCIE_HISI_ERR) += pcie-hisi-error.o
  35# pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
  36obj-y                           += dwc/
  37obj-y                           += mobiveil/
  38
  39
  40# The following drivers are for devices that use the generic ACPI
  41# pci_root.c driver but don't support standard ECAM config access.
  42# They contain MCFG quirks to replace the generic ECAM accessors with
  43# device-specific ones that are shared with the DT driver.
  44
  45# The ACPI driver is generic and should not require driver-specific
  46# config options to be enabled, so we always build these drivers on
  47# ARM64 and use internal ifdefs to only build the pieces we need
  48# depending on whether ACPI, the DT driver, or both are enabled.
  49
  50ifdef CONFIG_PCI
  51obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
  52obj-$(CONFIG_ARM64) += pci-thunder-pem.o
  53obj-$(CONFIG_ARM64) += pci-xgene.o
  54endif
  55