/*
 * Copyright © 2006 Intel Corporation
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 *
 * Authors:
 *    Eric Anholt <eric@anholt.net>
 *
 */

#include <drm/drm_dp_helper.h>

#include "display/intel_display.h"
#include "display/intel_display_types.h"
#include "display/intel_gmbus.h"

#include "i915_drv.h"

#define _INTEL_BIOS_PRIVATE
#include "intel_vbt_defs.h"

/**
 * DOC: Video BIOS Table (VBT)
 *
 * The Video BIOS Table, or VBT, provides platform and board specific
 * configuration information to the driver that is not discoverable or available
 * through other means. The configuration is mostly related to display
 * hardware. The VBT is available via the ACPI OpRegion or, on older systems, in
 * the PCI ROM.
 *
 * The VBT consists of a VBT Header (defined as &struct vbt_header), a BDB
 * Header (&struct bdb_header), and a number of BIOS Data Blocks (BDB) that
 * contain the actual configuration information. The VBT Header, and thus the
 * VBT, begins with "$VBT" signature. The VBT Header contains the offset of the
 * BDB Header. The data blocks are concatenated after the BDB Header. The data
 * blocks have a 1-byte Block ID, 2-byte Block Size, and Block Size bytes of
 * data. (Block 53, the MIPI Sequence Block is an exception.)
 *
 * The driver parses the VBT during load. The relevant information is stored in
 * driver private data for ease of use, and the actual VBT is not read after
 * that.
 */

/* Wrapper for VBT child device config */
struct display_device_data {
        struct child_device_config child;
        struct dsc_compression_parameters_entry *dsc;
        struct list_head node;
};

#define SLAVE_ADDR1     0x70
#define SLAVE_ADDR2     0x72

/* Get BDB block size given a pointer to Block ID. */
static u32 _get_blocksize(const u8 *block_base)
{
        /* The MIPI Sequence Block v3+ has a separate size field. */
        if (*block_base == BDB_MIPI_SEQUENCE && *(block_base + 3) >= 3)
                return *((const u32 *)(block_base + 4));
        else
                return *((const u16 *)(block_base + 1));
}

/* Get BDB block size give a pointer to data after Block ID and Block Size. */
static u32 get_blocksize(const void *block_data)
{
        return _get_blocksize(block_data - 3);
}

static const void *
find_section(const void *_bdb, enum bdb_block_id section_id)
{
        const struct bdb_header *bdb = _bdb;
        const u8 *base = _bdb;
        int index = 0;
        u32 total, current_size;
        enum bdb_block_id current_id;

        /* skip to first section */
        index += bdb->header_size;
        total = bdb->bdb_size;

        /* walk the sections looking for section_id */
        while (index + 3 < total) {
                current_id = *(base + index);
                current_size = _get_blocksize(base + index);
                index += 3;

                if (index + current_size > total)
                        return NULL;

                if (current_id == section_id)
                        return base + index;

                index += current_size;
        }

        return NULL;
}

static void
fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
                        const struct lvds_dvo_timing *dvo_timing)
{
        panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) |
                dvo_timing->hactive_lo;
        panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay +
                ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo);
        panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start +
                ((dvo_timing->hsync_pulse_width_hi << 8) |
                        dvo_timing->hsync_pulse_width_lo);
        panel_fixed_mode->htotal = panel_fixed_mode->hdisplay +
                ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo);

        panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) |
                dvo_timing->vactive_lo;
        panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay +
                ((dvo_timing->vsync_off_hi << 4) | dvo_timing->vsync_off_lo);
        panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start +
                ((dvo_timing->vsync_pulse_width_hi << 4) |
                        dvo_timing->vsync_pulse_width_lo);
        panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay +
                ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo);
        panel_fixed_mode->clock = dvo_timing->clock * 10;
        panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;

        if (dvo_timing->hsync_positive)
                panel_fixed_mode->flags |= DRM_MODE_FLAG_PHSYNC;
        else
                panel_fixed_mode->flags |= DRM_MODE_FLAG_NHSYNC;

        if (dvo_timing->vsync_positive)
                panel_fixed_mode->flags |= DRM_MODE_FLAG_PVSYNC;
        else
                panel_fixed_mode->flags |= DRM_MODE_FLAG_NVSYNC;

        panel_fixed_mode->width_mm = (dvo_timing->himage_hi << 8) |
                dvo_timing->himage_lo;
        panel_fixed_mode->height_mm = (dvo_timing->vimage_hi << 8) |
                dvo_timing->vimage_lo;

        /* Some VBTs have bogus h/vtotal values */
        if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
                panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
        if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal)
                panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1;

        drm_mode_set_name(panel_fixed_mode);
}

static const struct lvds_dvo_timing *
get_lvds_dvo_timing(const struct bdb_lvds_lfp_data *lvds_lfp_data,
                    const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs,
                    int index)
{
        /*
         * the size of fp_timing varies on the different platform.
         * So calculate the DVO timing relative offset in LVDS data
         * entry to get the DVO timing entry
         */

        int lfp_data_size =
                lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset -
                lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset;
        int dvo_timing_offset =
                lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset -
                lvds_lfp_data_ptrs->ptr[0].fp_timing_offset;
        char *entry = (char *)lvds_lfp_data->data + lfp_data_size * index;

        return (struct lvds_dvo_timing *)(entry + dvo_timing_offset);
}

/* get lvds_fp_timing entry
 * this function may return NULL if the corresponding entry is invalid
 */
static const struct lvds_fp_timing *
get_lvds_fp_timing(const struct bdb_header *bdb,
                   const struct bdb_lvds_lfp_data *data,
                   const struct bdb_lvds_lfp_data_ptrs *ptrs,
                   int index)
{
        size_t data_ofs = (const u8 *)data - (const u8 *)bdb;
        u16 data_size = ((const u16 *)data)[-1]; /* stored in header */
        size_t ofs;

        if (index >= ARRAY_SIZE(ptrs->ptr))
                return NULL;
        ofs = ptrs->ptr[index].fp_timing_offset;
        if (ofs < data_ofs ||
            ofs + sizeof(struct lvds_fp_timing) > data_ofs + data_size)
                return NULL;
        return (const struct lvds_fp_timing *)((const u8 *)bdb + ofs);
}

/* Parse general panel options */
static void
parse_panel_options(struct drm_i915_private *dev_priv,
                    const struct bdb_header *bdb)
{
        const struct bdb_lvds_options *lvds_options;
        int panel_type;
        int drrs_mode;
        int ret;

        lvds_options = find_section(bdb, BDB_LVDS_OPTIONS);
        if (!lvds_options)
                return;

        dev_priv->vbt.lvds_dither = lvds_options->pixel_dither;

        ret = intel_opregion_get_panel_type(dev_priv);
        if (ret >= 0) {
                drm_WARN_ON(&dev_priv->drm, ret > 0xf);
                panel_type = ret;
                drm_dbg_kms(&dev_priv->drm, "Panel type: %d (OpRegion)\n",
                            panel_type);
        } else {
                if (lvds_options->panel_type > 0xf) {
                        drm_dbg_kms(&dev_priv->drm,
                                    "Invalid VBT panel type 0x%x\n",
                                    lvds_options->panel_type);
                        return;
                }
                panel_type = lvds_options->panel_type;
                drm_dbg_kms(&dev_priv->drm, "Panel type: %d (VBT)\n",
                            panel_type);
        }

        dev_priv->vbt.panel_type = panel_type;

        drrs_mode = (lvds_options->dps_panel_type_bits
                                >> (panel_type * 2)) & MODE_MASK;
        /*
         * VBT has static DRRS = 0 and seamless DRRS = 2.
         * The below piece of code is required to adjust vbt.drrs_type
         * to match the enum drrs_support_type.
         */
        switch (drrs_mode) {
        case 0:
                dev_priv->vbt.drrs_type = STATIC_DRRS_SUPPORT;
                drm_dbg_kms(&dev_priv->drm, "DRRS supported mode is static\n");
                break;
        case 2:
                dev_priv->vbt.drrs_type = SEAMLESS_DRRS_SUPPORT;
                drm_dbg_kms(&dev_priv->drm,
                            "DRRS supported mode is seamless\n");
                break;
        default:
                dev_priv->vbt.drrs_type = DRRS_NOT_SUPPORTED;
                drm_dbg_kms(&dev_priv->drm,
                            "DRRS not supported (VBT input)\n");
                break;
        }
}

/* Try to find integrated panel timing data */
static void
parse_lfp_panel_dtd(struct drm_i915_private *dev_priv,
                    const struct bdb_header *bdb)
{
        const struct bdb_lvds_lfp_data *lvds_lfp_data;
        const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs;
        const struct lvds_dvo_timing *panel_dvo_timing;
        const struct lvds_fp_timing *fp_timing;
        struct drm_display_mode *panel_fixed_mode;
        int panel_type = dev_priv->vbt.panel_type;

        lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA);
        if (!lvds_lfp_data)
                return;

        lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS);
        if (!lvds_lfp_data_ptrs)
                return;

        panel_dvo_timing = get_lvds_dvo_timing(lvds_lfp_data,
                                               lvds_lfp_data_ptrs,
                                               panel_type);

        panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
        if (!panel_fixed_mode)
                return;

        fill_detail_timing_data(panel_fixed_mode, panel_dvo_timing);

        dev_priv->vbt.lfp_lvds_vbt_mode = panel_fixed_mode;

        drm_dbg_kms(&dev_priv->drm,
                    "Found panel mode in BIOS VBT legacy lfp table:\n");
        drm_mode_debug_printmodeline(panel_fixed_mode);

        fp_timing = get_lvds_fp_timing(bdb, lvds_lfp_data,
                                       lvds_lfp_data_ptrs,
                                       panel_type);
        if (fp_timing) {
                /* check the resolution, just to be sure */
                if (fp_timing->x_res == panel_fixed_mode->hdisplay &&
                    fp_timing->y_res == panel_fixed_mode->vdisplay) {
                        dev_priv->vbt.bios_lvds_val = fp_timing->lvds_reg_val;
                        drm_dbg_kms(&dev_priv->drm,
                                    "VBT initial LVDS value %x\n",
                                    dev_priv->vbt.bios_lvds_val);
                }
        }
}

static void
parse_generic_dtd(struct drm_i915_private *dev_priv,
                  const struct bdb_header *bdb)
{
        const struct bdb_generic_dtd *generic_dtd;
        const struct generic_dtd_entry *dtd;
        struct drm_display_mode *panel_fixed_mode;
        int num_dtd;

        generic_dtd = find_section(bdb, BDB_GENERIC_DTD);
        if (!generic_dtd)
                return;

        if (generic_dtd->gdtd_size < sizeof(struct generic_dtd_entry)) {
                drm_err(&dev_priv->drm, "GDTD size %u is too small.\n",
                        generic_dtd->gdtd_size);
                return;
        } else if (generic_dtd->gdtd_size !=
                   sizeof(struct generic_dtd_entry)) {
                drm_err(&dev_priv->drm, "Unexpected GDTD size %u\n",
                        generic_dtd->gdtd_size);
                /* DTD has unknown fields, but keep going */
        }

        num_dtd = (get_blocksize(generic_dtd) -
                   sizeof(struct bdb_generic_dtd)) / generic_dtd->gdtd_size;
        if (dev_priv->vbt.panel_type >= num_dtd) {
                drm_err(&dev_priv->drm,
                        "Panel type %d not found in table of %d DTD's\n",
                        dev_priv->vbt.panel_type, num_dtd);
                return;
        }

        dtd = &generic_dtd->dtd[dev_priv->vbt.panel_type];

        panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
        if (!panel_fixed_mode)
                return;

        panel_fixed_mode->hdisplay = dtd->hactive;
        panel_fixed_mode->hsync_start =
                panel_fixed_mode->hdisplay + dtd->hfront_porch;
        panel_fixed_mode->hsync_end =
                panel_fixed_mode->hsync_start + dtd->hsync;
        panel_fixed_mode->htotal =
                panel_fixed_mode->hdisplay + dtd->hblank;

        panel_fixed_mode->vdisplay = dtd->vactive;
        panel_fixed_mode->vsync_start =
                panel_fixed_mode->vdisplay + dtd->vfront_porch;
        panel_fixed_mode->vsync_end =
                panel_fixed_mode->vsync_start + dtd->vsync;
        panel_fixed_mode->vtotal =
                panel_fixed_mode->vdisplay + dtd->vblank;

        panel_fixed_mode->clock = dtd->pixel_clock;
        panel_fixed_mode->width_mm = dtd->width_mm;
        panel_fixed_mode->height_mm = dtd->height_mm;

        panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
        drm_mode_set_name(panel_fixed_mode);

        if (dtd->hsync_positive_polarity)
                panel_fixed_mode->flags |= DRM_MODE_FLAG_PHSYNC;
        else
                panel_fixed_mode->flags |= DRM_MODE_FLAG_NHSYNC;

        if (dtd->vsync_positive_polarity)
                panel_fixed_mode->flags |= DRM_MODE_FLAG_PVSYNC;
        else
                panel_fixed_mode->flags |= DRM_MODE_FLAG_NVSYNC;

        drm_dbg_kms(&dev_priv->drm,
                    "Found panel mode in BIOS VBT generic dtd table:\n");
        drm_mode_debug_printmodeline(panel_fixed_mode);

        dev_priv->vbt.lfp_lvds_vbt_mode = panel_fixed_mode;
}

static void
parse_panel_dtd(struct drm_i915_private *dev_priv,
                const struct bdb_header *bdb)
{
        /*
         * Older VBTs provided provided DTD information for internal displays
         * through the "LFP panel DTD" block (42).  As of VBT revision 229,
         * that block is now deprecated and DTD information should be provided
         * via a newer "generic DTD" block (58).  Just to be safe, we'll
         * try the new generic DTD block first on VBT >= 229, but still fall
         * back to trying the old LFP block if that fails.
         */
        if (bdb->version >= 229)
                parse_generic_dtd(dev_priv, bdb);
        if (!dev_priv->vbt.lfp_lvds_vbt_mode)
                parse_lfp_panel_dtd(dev_priv, bdb);
}

static void
parse_lfp_backlight(struct drm_i915_private *dev_priv,
                    const struct bdb_header *bdb)
{
        const struct bdb_lfp_backlight_data *backlight_data;
        const struct lfp_backlight_data_entry *entry;
        int panel_type = dev_priv->vbt.panel_type;
        u16 level;

        backlight_data = find_section(bdb, BDB_LVDS_BACKLIGHT);
        if (!backlight_data)
                return;

        if (backlight_data->entry_size != sizeof(backlight_data->data[0])) {
                drm_dbg_kms(&dev_priv->drm,
                            "Unsupported backlight data entry size %u\n",
                            backlight_data->entry_size);
                return;
        }

        entry = &backlight_data->data[panel_type];

        dev_priv->vbt.backlight.present = entry->type == BDB_BACKLIGHT_TYPE_PWM;
        if (!dev_priv->vbt.backlight.present) {
                drm_dbg_kms(&dev_priv->drm,
                            "PWM backlight not present in VBT (type %u)\n",
                            entry->type);
                return;
        }

        dev_priv->vbt.backlight.type = INTEL_BACKLIGHT_DISPLAY_DDI;
        if (bdb->version >= 191 &&
            get_blocksize(backlight_data) >= sizeof(*backlight_data)) {
                const struct lfp_backlight_control_method *method;

                method = &backlight_data->backlight_control[panel_type];
                dev_priv->vbt.backlight.type = method->type;
                dev_priv->vbt.backlight.controller = method->controller;
        }

        dev_priv->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz;
        dev_priv->vbt.backlight.active_low_pwm = entry->active_low_pwm;

        if (bdb->version >= 234) {
                u16 min_level;
                bool scale;

                level = backlight_data->brightness_level[panel_type].level;
                min_level = backlight_data->brightness_min_level[panel_type].level;

                if (bdb->version >= 236)
                        scale = backlight_data->brightness_precision_bits[panel_type] == 16;
                else
                        scale = level > 255;

                if (scale)
                        min_level = min_level / 255;

                if (min_level > 255) {
                        drm_warn(&dev_priv->drm, "Brightness min level > 255\n");
                        level = 255;
                }
                dev_priv->vbt.backlight.min_brightness = min_level;
        } else {
                level = backlight_data->level[panel_type];
                dev_priv->vbt.backlight.min_brightness = entry->min_brightness;
        }

        drm_dbg_kms(&dev_priv->drm,
                    "VBT backlight PWM modulation frequency %u Hz, "
                    "active %s, min brightness %u, level %u, controller %u\n",
                    dev_priv->vbt.backlight.pwm_freq_hz,
                    dev_priv->vbt.backlight.active_low_pwm ? "low" : "high",
                    dev_priv->vbt.backlight.min_brightness,
                    level,
                    dev_priv->vbt.backlight.controller);
}

/* Try to find sdvo panel data */
static void
parse_sdvo_panel_data(struct drm_i915_private *dev_priv,
                      const struct bdb_header *bdb)
{
        const struct bdb_sdvo_panel_dtds *dtds;
        struct drm_display_mode *panel_fixed_mode;
        int index;

        index = dev_priv->params.vbt_sdvo_panel_type;
        if (index == -2) {
                drm_dbg_kms(&dev_priv->drm,
                            "Ignore SDVO panel mode from BIOS VBT tables.\n");
                return;
        }

        if (index == -1) {
                const struct bdb_sdvo_lvds_options *sdvo_lvds_options;

                sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS);
                if (!sdvo_lvds_options)
                        return;

                index = sdvo_lvds_options->panel_type;
        }

        dtds = find_section(bdb, BDB_SDVO_PANEL_DTDS);
        if (!dtds)
                return;

        panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
        if (!panel_fixed_mode)
                return;

        fill_detail_timing_data(panel_fixed_mode, &dtds->dtds[index]);

        dev_priv->vbt.sdvo_lvds_vbt_mode = panel_fixed_mode;

        drm_dbg_kms(&dev_priv->drm,
                    "Found SDVO panel mode in BIOS VBT tables:\n");
        drm_mode_debug_printmodeline(panel_fixed_mode);
}

static int intel_bios_ssc_frequency(struct drm_i915_private *dev_priv,
                                    bool alternate)
{
        switch (INTEL_GEN(dev_priv)) {
        case 2:
                return alternate ? 66667 : 48000;
        case 3:
        case 4:
                return alternate ? 100000 : 96000;
        default:
                return alternate ? 100000 : 120000;
        }
}

static void
parse_general_features(struct drm_i915_private *dev_priv,
                       const struct bdb_header *bdb)
{
        const struct bdb_general_features *general;

        general = find_section(bdb, BDB_GENERAL_FEATURES);
        if (!general)
                return;

        dev_priv->vbt.int_tv_support = general->int_tv_support;
        /* int_crt_support can't be trusted on earlier platforms */
        if (bdb->version >= 155 &&
            (HAS_DDI(dev_priv) || IS_VALLEYVIEW(dev_priv)))
                dev_priv->vbt.int_crt_support = general->int_crt_support;
        dev_priv->vbt.lvds_use_ssc = general->enable_ssc;
        dev_priv->vbt.lvds_ssc_freq =
                intel_bios_ssc_frequency(dev_priv, general->ssc_freq);
        dev_priv->vbt.display_clock_mode = general->display_clock_mode;
        dev_priv->vbt.fdi_rx_polarity_inverted = general->fdi_rx_polarity_inverted;
        if (bdb->version >= 181) {
                dev_priv->vbt.orientation = general->rotate_180 ?
                        DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP :
                        DRM_MODE_PANEL_ORIENTATION_NORMAL;
        } else {
                dev_priv->vbt.orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
        }
        drm_dbg_kms(&dev_priv->drm,
                    "BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d display_clock_mode %d fdi_rx_polarity_inverted %d\n",
                    dev_priv->vbt.int_tv_support,
                    dev_priv->vbt.int_crt_support,
                    dev_priv->vbt.lvds_use_ssc,
                    dev_priv->vbt.lvds_ssc_freq,
                    dev_priv->vbt.display_clock_mode,
                    dev_priv->vbt.fdi_rx_polarity_inverted);
}

static const struct child_device_config *
child_device_ptr(const struct bdb_general_definitions *defs, int i)
{
        return (const void *) &defs->devices[i * defs->child_dev_size];
}

static void
parse_sdvo_device_mapping(struct drm_i915_private *dev_priv, u8 bdb_version)
{
        struct sdvo_device_mapping *mapping;
        const struct display_device_data *devdata;
        const struct child_device_config *child;
        int count = 0;

        /*
         * Only parse SDVO mappings on gens that could have SDVO. This isn't
         * accurate and doesn't have to be, as long as it's not too strict.
         */
        if (!IS_GEN_RANGE(dev_priv, 3, 7)) {
                drm_dbg_kms(&dev_priv->drm, "Skipping SDVO device mapping\n");
                return;
        }

        list_for_each_entry(devdata, &dev_priv->vbt.display_devices, node) {
                child = &devdata->child;

                if (child->slave_addr != SLAVE_ADDR1 &&
                    child->slave_addr != SLAVE_ADDR2) {
                        /*
                         * If the slave address is neither 0x70 nor 0x72,
                         * it is not a SDVO device. Skip it.
                         */
                        continue;
                }
                if (child->dvo_port != DEVICE_PORT_DVOB &&
                    child->dvo_port != DEVICE_PORT_DVOC) {
                        /* skip the incorrect SDVO port */
                        drm_dbg_kms(&dev_priv->drm,
                                    "Incorrect SDVO port. Skip it\n");
                        continue;
                }
                drm_dbg_kms(&dev_priv->drm,
                            "the SDVO device with slave addr %2x is found on"
                            " %s port\n",
                            child->slave_addr,
                            (child->dvo_port == DEVICE_PORT_DVOB) ?
                            "SDVOB" : "SDVOC");
                mapping = &dev_priv->vbt.sdvo_mappings[child->dvo_port - 1];
                if (!mapping->initialized) {
                        mapping->dvo_port = child->dvo_port;
                        mapping->slave_addr = child->slave_addr;
                        mapping->dvo_wiring = child->dvo_wiring;
                        mapping->ddc_pin = child->ddc_pin;
                        mapping->i2c_pin = child->i2c_pin;
                        mapping->initialized = 1;
                        drm_dbg_kms(&dev_priv->drm,
                                    "SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n",
                                    mapping->dvo_port, mapping->slave_addr,
                                    mapping->dvo_wiring, mapping->ddc_pin,
                                    mapping->i2c_pin);
                } else {
                        drm_dbg_kms(&dev_priv->drm,
                                    "Maybe one SDVO port is shared by "
                                    "two SDVO device.\n");
                }
                if (child->slave2_addr) {
                        /* Maybe this is a SDVO device with multiple inputs */
                        /* And the mapping info is not added */
                        drm_dbg_kms(&dev_priv->drm,
                                    "there exists the slave2_addr. Maybe this"
                                    " is a SDVO device with multiple inputs.\n");
                }
                count++;
        }

        if (!count) {
                /* No SDVO device info is found */
                drm_dbg_kms(&dev_priv->drm,
                            "No SDVO device info is found in VBT\n");
        }
}

static void
parse_driver_features(struct drm_i915_private *dev_priv,
                      const struct bdb_header *bdb)
{
        const struct bdb_driver_features *driver;

        driver = find_section(bdb, BDB_DRIVER_FEATURES);
        if (!driver)
                return;

        if (INTEL_GEN(dev_priv) >= 5) {
                /*
                 * Note that we consider BDB_DRIVER_FEATURE_INT_SDVO_LVDS
                 * to mean "eDP". The VBT spec doesn't agree with that
                 * interpretation, but real world VBTs seem to.
                 */
                if (driver->lvds_config != BDB_DRIVER_FEATURE_INT_LVDS)
                        dev_priv->vbt.int_lvds_support = 0;
        } else {
                /*
                 * FIXME it's not clear which BDB version has the LVDS config
                 * bits defined. Revision history in the VBT spec says:
                 * "0.92 | Add two definitions for VBT value of LVDS Active
                 *  Config (00b and 11b values defined) | 06/13/2005"
                 * but does not the specify the BDB version.
                 *
                 * So far version 134 (on i945gm) is the oldest VBT observed
                 * in the wild with the bits correctly populated. Version
                 * 108 (on i85x) does not have the bits correctly populated.
                 */
                if (bdb->version >= 134 &&
                    driver->lvds_config != BDB_DRIVER_FEATURE_INT_LVDS &&
                    driver->lvds_config != BDB_DRIVER_FEATURE_INT_SDVO_LVDS)
                        dev_priv->vbt.int_lvds_support = 0;
        }

        if (bdb->version < 228) {
                drm_dbg_kms(&dev_priv->drm, "DRRS State Enabled:%d\n",
                            driver->drrs_enabled);
                /*
                 * If DRRS is not supported, drrs_type has to be set to 0.
                 * This is because, VBT is configured in such a way that
                 * static DRRS is 0 and DRRS not supported is represented by
                 * driver->drrs_enabled=false
                 */
                if (!driver->drrs_enabled)
                        dev_priv->vbt.drrs_type = DRRS_NOT_SUPPORTED;

                dev_priv->vbt.psr.enable = driver->psr_enabled;
        }
}

static void
parse_power_conservation_features(struct drm_i915_private *dev_priv,
                                  const struct bdb_header *bdb)
{
        const struct bdb_lfp_power *power;
        u8 panel_type = dev_priv->vbt.panel_type;

        if (bdb->version < 228)
                return;

        power = find_section(bdb, BDB_LFP_POWER);
        if (!power)
                return;

        dev_priv->vbt.psr.enable = power->psr & BIT(panel_type);

        /*
         * If DRRS is not supported, drrs_type has to be set to 0.
         * This is because, VBT is configured in such a way that
         * static DRRS is 0 and DRRS not supported is represented by
         * power->drrs & BIT(panel_type)=false
         */
        if (!(power->drrs & BIT(panel_type)))
                dev_priv->vbt.drrs_type = DRRS_NOT_SUPPORTED;

        if (bdb->version >= 232)
                dev_priv->vbt.edp.hobl = power->hobl & BIT(panel_type);
}

static void
parse_edp(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)
{
        const struct bdb_edp *edp;
        const struct edp_power_seq *edp_pps;
        const struct edp_fast_link_params *edp_link_params;
        int panel_type = dev_priv->vbt.panel_type;

        edp = find_section(bdb, BDB_EDP);
        if (!edp)
                return;

        switch ((edp->color_depth >> (panel_type * 2)) & 3) {
        case EDP_18BPP:
                dev_priv->vbt.edp.bpp = 18;
                break;
        case EDP_24BPP:
                dev_priv->vbt.edp.bpp = 24;
                break;
        case EDP_30BPP:
                dev_priv->vbt.edp.bpp = 30;
                break;
        }

        /* Get the eDP sequencing and link info */
        edp_pps = &edp->power_seqs[panel_type];
        edp_link_params = &edp->fast_link_params[panel_type];

        dev_priv->vbt.edp.pps = *edp_pps;

        switch (edp_link_params->rate) {
        case EDP_RATE_1_62:
                dev_priv->vbt.edp.rate = DP_LINK_BW_1_62;
                break;
        case EDP_RATE_2_7:
                dev_priv->vbt.edp.rate = DP_LINK_BW_2_7;
                break;
        default:
                drm_dbg_kms(&dev_priv->drm,
                            "VBT has unknown eDP link rate value %u\n",
                             edp_link_params->rate);
                break;
        }

        switch (edp_link_params->lanes) {
        case EDP_LANE_1:
                dev_priv->vbt.edp.lanes = 1;
                break;
        case EDP_LANE_2:
                dev_priv->vbt.edp.lanes = 2;
                break;
        case EDP_LANE_4:
                dev_priv->vbt.edp.lanes = 4;
                break;
        default:
                drm_dbg_kms(&dev_priv->drm,
                            "VBT has unknown eDP lane count value %u\n",
                            edp_link_params->lanes);
                break;
        }

        switch (edp_link_params->preemphasis) {
        case EDP_PREEMPHASIS_NONE:
                dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_0;
                break;
        case EDP_PREEMPHASIS_3_5dB:
                dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_1;
                break;
        case EDP_PREEMPHASIS_6dB:
                dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_2;
                break;
        case EDP_PREEMPHASIS_9_5dB:
                dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_3;
                break;
        default:
                drm_dbg_kms(&dev_priv->drm,
                            "VBT has unknown eDP pre-emphasis value %u\n",
                            edp_link_params->preemphasis);
                break;
        }

        switch (edp_link_params->vswing) {
        case EDP_VSWING_0_4V:
                dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_0;
                break;
        case EDP_VSWING_0_6V:
                dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_1;
                break;
        case EDP_VSWING_0_8V:
                dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
                break;
        case EDP_VSWING_1_2V:
                dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
                break;
        default:
                drm_dbg_kms(&dev_priv->drm,
                            "VBT has unknown eDP voltage swing value %u\n",
                            edp_link_params->vswing);
                break;
        }

        if (bdb->version >= 173) {
                u8 vswing;

                /* Don't read from VBT if module parameter has valid value*/
                if (dev_priv->params.edp_vswing) {
                        dev_priv->vbt.edp.low_vswing =
                                dev_priv->params.edp_vswing == 1;
                } else {
                        vswing = (edp->edp_vswing_preemph >> (panel_type * 4)) & 0xF;
                        dev_priv->vbt.edp.low_vswing = vswing == 0;
                }
        }
}

static void
parse_psr(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)
{
        const struct bdb_psr *psr;
        const struct psr_table *psr_table;
        int panel_type = dev_priv->vbt.panel_type;

        psr = find_section(bdb, BDB_PSR);
        if (!psr) {
                drm_dbg_kms(&dev_priv->drm, "No PSR BDB found.\n");
                return;
        }

        psr_table = &psr->psr_table[panel_type];

        dev_priv->vbt.psr.full_link = psr_table->full_link;
        dev_priv->vbt.psr.require_aux_wakeup = psr_table->require_aux_to_wakeup;

        /* Allowed VBT values goes from 0 to 15 */
        dev_priv->vbt.psr.idle_frames = psr_table->idle_frames < 0 ? 0 :
                psr_table->idle_frames > 15 ? 15 : psr_table->idle_frames;

        switch (psr_table->lines_to_wait) {
        case 0:
                dev_priv->vbt.psr.lines_to_wait = PSR_0_LINES_TO_WAIT;
                break;
        case 1:
                dev_priv->vbt.psr.lines_to_wait = PSR_1_LINE_TO_WAIT;
                break;
        case 2:
                dev_priv->vbt.psr.lines_to_wait = PSR_4_LINES_TO_WAIT;
                break;
        case 3:
                dev_priv->vbt.psr.lines_to_wait = PSR_8_LINES_TO_WAIT;
                break;
        default:
                drm_dbg_kms(&dev_priv->drm,
                            "VBT has unknown PSR lines to wait %u\n",
                            psr_table->lines_to_wait);
                break;
        }

        /*
         * New psr options 0=500us, 1=100us, 2=2500us, 3=0us
         * Old decimal value is wake up time in multiples of 100 us.
         */
        if (bdb->version >= 205 &&
            (IS_GEN9_BC(dev_priv) || IS_GEMINILAKE(dev_priv) ||
             INTEL_GEN(dev_priv) >= 10)) {
                switch (psr_table->tp1_wakeup_time) {
                case 0:
                        dev_priv->vbt.psr.tp1_wakeup_time_us = 500;
                        break;
                case 1:
                        dev_priv->vbt.psr.tp1_wakeup_time_us = 100;
                        break;
                case 3:
                        dev_priv->vbt.psr.tp1_wakeup_time_us = 0;
                        break;
                default:
                        drm_dbg_kms(&dev_priv->drm,
                                    "VBT tp1 wakeup time value %d is outside range[0-3], defaulting to max value 2500us\n",
                                    psr_table->tp1_wakeup_time);
                        fallthrough;
                case 2:
                        dev_priv->vbt.psr.tp1_wakeup_time_us = 2500;
                        break;
                }

                switch (psr_table->tp2_tp3_wakeup_time) {
                case 0:
                        dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 500;
                        break;
                case 1:
                        dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 100;
                        break;
                case 3:
                        dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 0;
                        break;
                default:
                        drm_dbg_kms(&dev_priv->drm,
                                    "VBT tp2_tp3 wakeup time value %d is outside range[0-3], defaulting to max value 2500us\n",
                                    psr_table->tp2_tp3_wakeup_time);
                        fallthrough;
                case 2:
                        dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 2500;
                break;
                }
        } else {
                dev_priv->vbt.psr.tp1_wakeup_time_us = psr_table->tp1_wakeup_time * 100;
                dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = psr_table->tp2_tp3_wakeup_time * 100;
        }

        if (bdb->version >= 226) {
                u32 wakeup_time = psr->psr2_tp2_tp3_wakeup_time;

                wakeup_time = (wakeup_time >> (2 * panel_type)) & 0x3;
                switch (wakeup_time) {
                case 0:
                        wakeup_time = 500;
                        break;
                case 1:
                        wakeup_time = 100;
                        break;
                case 3:
                        wakeup_time = 50;
                        break;
                default:
                case 2:
                        wakeup_time = 2500;
                        break;
                }
                dev_priv->vbt.psr.psr2_tp2_tp3_wakeup_time_us = wakeup_time;
        } else {
                /* Reusing PSR1 wakeup time for PSR2 in older VBTs */
                dev_priv->vbt.psr.psr2_tp2_tp3_wakeup_time_us = dev_priv->vbt.psr.tp2_tp3_wakeup_time_us;
        }
}

static void parse_dsi_backlight_ports(struct drm_i915_private *dev_priv,
                                      u16 version, enum port port)
{
        if (!dev_priv->vbt.dsi.config->dual_link || version < 197) {
                dev_priv->vbt.dsi.bl_ports = BIT(port);
                if (dev_priv->vbt.dsi.config->cabc_supported)
                        dev_priv->vbt.dsi.cabc_ports = BIT(port);

                return;
        }

        switch (dev_priv->vbt.dsi.config->dl_dcs_backlight_ports) {
        case DL_DCS_PORT_A:
                dev_priv->vbt.dsi.bl_ports = BIT(PORT_A);
                break;
        case DL_DCS_PORT_C:
                dev_priv->vbt.dsi.bl_ports = BIT(PORT_C);
                break;
        default:
        case DL_DCS_PORT_A_AND_C:
                dev_priv->vbt.dsi.bl_ports = BIT(PORT_A) | BIT(PORT_C);
                break;
        }

        if (!dev_priv->vbt.dsi.config->cabc_supported)
                return;

        switch (dev_priv->vbt.dsi.config->dl_dcs_cabc_ports) {
        case DL_DCS_PORT_A:
                dev_priv->vbt.dsi.cabc_ports = BIT(PORT_A);
                break;
        case DL_DCS_PORT_C:
                dev_priv->vbt.dsi.cabc_ports = BIT(PORT_C);
                break;
        default:
        case DL_DCS_PORT_A_AND_C:
                dev_priv->vbt.dsi.cabc_ports =
                                        BIT(PORT_A) | BIT(PORT_C);
                break;
        }
}

static void
parse_mipi_config(struct drm_i915_private *dev_priv,
                  const struct bdb_header *bdb)
{
        const struct bdb_mipi_config *start;
        const struct mipi_config *config;
        const struct mipi_pps_data *pps;
        int panel_type = dev_priv->vbt.panel_type;
        enum port port;

        /* parse MIPI blocks only if LFP type is MIPI */
        if (!intel_bios_is_dsi_present(dev_priv, &port))
                return;

        /* Initialize this to undefined indicating no generic MIPI support */
        dev_priv->vbt.dsi.panel_id = MIPI_DSI_UNDEFINED_PANEL_ID;

        /* Block #40 is already parsed and panel_fixed_mode is
         * stored in dev_priv->lfp_lvds_vbt_mode
         * resuse this when needed
         */

        /* Parse #52 for panel index used from panel_type already
         * parsed
         */
        start = find_section(bdb, BDB_MIPI_CONFIG);
        if (!start) {
                drm_dbg_kms(&dev_priv->drm, "No MIPI config BDB found");
                return;
        }

        drm_dbg(&dev_priv->drm, "Found MIPI Config block, panel index = %d\n",
                panel_type);

        /*
         * get hold of the correct configuration block and pps data as per
         * the panel_type as index
         */
        config = &start->config[panel_type];
        pps = &start->pps[panel_type];

        /* store as of now full data. Trim when we realise all is not needed */
        dev_priv->vbt.dsi.config = kmemdup(config, sizeof(struct mipi_config), GFP_KERNEL);
        if (!dev_priv->vbt.dsi.config)
                return;

        dev_priv->vbt.dsi.pps = kmemdup(pps, sizeof(struct mipi_pps_data), GFP_KERNEL);
        if (!dev_priv->vbt.dsi.pps) {
                kfree(dev_priv->vbt.dsi.config);
                return;
        }

        parse_dsi_backlight_ports(dev_priv, bdb->version, port);

        /* FIXME is the 90 vs. 270 correct? */
        switch (config->rotation) {
        case ENABLE_ROTATION_0:
                /*
                 * Most (all?) VBTs claim 0 degrees despite having
                 * an upside down panel, thus we do not trust this.
                 */
                dev_priv->vbt.dsi.orientation =
                        DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
                break;
        case ENABLE_ROTATION_90:
                dev_priv->vbt.dsi.orientation =
                        DRM_MODE_PANEL_ORIENTATION_RIGHT_UP;
                break;
        case ENABLE_ROTATION_180:
                dev_priv->vbt.dsi.orientation =
                        DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
                break;
        case ENABLE_ROTATION_270:
                dev_priv->vbt.dsi.orientation =
                        DRM_MODE_PANEL_ORIENTATION_LEFT_UP;
                break;
        }

        /* We have mandatory mipi config blocks. Initialize as generic panel */
        dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID;
}

/* Find the sequence block and size for the given panel. */
static const u8 *
find_panel_sequence_block(const struct bdb_mipi_sequence *sequence,
                          u16 panel_id, u32 *seq_size)
{
        u32 total = get_blocksize(sequence);
        const u8 *data = &sequence->data[0];
        u8 current_id;
        u32 current_size;
        int header_size = sequence->version >= 3 ? 5 : 3;
        int index = 0;
        int i;

        /* skip new block size */
        if (sequence->version >= 3)
                data += 4;

        for (i = 0; i < MAX_MIPI_CONFIGURATIONS && index < total; i++) {
                if (index + header_size > total) {
                        DRM_ERROR("Invalid sequence block (header)\n");
                        return NULL;
                }

                current_id = *(data + index);
                if (sequence->version >= 3)
                        current_size = *((const u32 *)(data + index + 1));
                else
                        current_size = *((const u16 *)(data + index + 1));

                index += header_size;

                if (index + current_size > total) {
                        DRM_ERROR("Invalid sequence block\n");
                        return NULL;
                }

                if (current_id == panel_id) {
                        *seq_size = current_size;
                        return data + index;
                }

                index += current_size;
        }

        DRM_ERROR("Sequence block detected but no valid configuration\n");

        return NULL;
}

static int goto_next_sequence(const u8 *data, int index, int total)
{
        u16 len;

        /* Skip Sequence Byte. */
        for (index = index + 1; index < total; index += len) {
                u8 operation_byte = *(data + index);
                index++;

                switch (operation_byte) {
                case MIPI_SEQ_ELEM_END:
                        return index;
                case MIPI_SEQ_ELEM_SEND_PKT:
                        if (index + 4 > total)
                                return 0;

                        len = *((const u16 *)(data + index + 2)) + 4;
                        break;
                case MIPI_SEQ_ELEM_DELAY:
                        len = 4;
                        break;
                case MIPI_SEQ_ELEM_GPIO:
                        len = 2;
                        break;
                case MIPI_SEQ_ELEM_I2C:
                        if (index + 7 > total)
                                return 0;
                        len = *(data + index + 6) + 7;
                        break;
                default:
                        DRM_ERROR("Unknown operation byte\n");
                        return 0;
                }
        }

        return 0;
}

static int goto_next_sequence_v3(const u8 *data, int index, int total)
{
        int seq_end;
        u16 len;
        u32 size_of_sequence;

        /*
         * Could skip sequence based on Size of Sequence alone, but also do some
         * checking on the structure.
         */
        if (total < 5) {
                DRM_ERROR("Too small sequence size\n");
                return 0;
        }

        /* Skip Sequence Byte. */
        index++;

        /*
         * Size of Sequence. Excludes the Sequence Byte and the size itself,
         * includes MIPI_SEQ_ELEM_END byte, excludes the final MIPI_SEQ_END
         * byte.
         */
        size_of_sequence = *((const u32 *)(data + index));
        index += 4;

        seq_end = index + size_of_sequence;
        if (seq_end > total) {
                DRM_ERROR("Invalid sequence size\n");
                return 0;
        }

        for (; index < total; index += len) {
                u8 operation_byte = *(data + index);
                index++;

                if (operation_byte == MIPI_SEQ_ELEM_END) {
                        if (index != seq_end) {
                                DRM_ERROR("Invalid element structure\n");
                                return 0;
                        }
                        return index;
                }

                len = *(data + index);
                index++;

                /*
                 * FIXME: Would be nice to check elements like for v1/v2 in
                 * goto_next_sequence() above.
                 */
                switch (operation_byte) {
                case MIPI_SEQ_ELEM_SEND_PKT:
                case MIPI_SEQ_ELEM_DELAY:
                case MIPI_SEQ_ELEM_GPIO:
                case MIPI_SEQ_ELEM_I2C:
                case MIPI_SEQ_ELEM_SPI:
                case MIPI_SEQ_ELEM_PMIC:
                        break;
                default:
                        DRM_ERROR("Unknown operation byte %u\n",
                                  operation_byte);
                        break;
                }
        }

        return 0;
}

/*
 * Get len of pre-fixed deassert fragment from a v1 init OTP sequence,
 * skip all delay + gpio operands and stop at the first DSI packet op.
 */
static int get_init_otp_deassert_fragment_len(struct drm_i915_private *dev_priv)
{
        const u8 *data = dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP];
        int index, len;

        if (drm_WARN_ON(&dev_priv->drm,
                        !data || dev_priv->vbt.dsi.seq_version != 1))
                return 0;

        /* index = 1 to skip sequence byte */
        for (index = 1; data[index] != MIPI_SEQ_ELEM_END; index += len) {
                switch (data[index]) {
                case MIPI_SEQ_ELEM_SEND_PKT:
                        return index == 1 ? 0 : index;
                case MIPI_SEQ_ELEM_DELAY:
                        len = 5; /* 1 byte for operand + uint32 */
                        break;
                case MIPI_SEQ_ELEM_GPIO:
                        len = 3; /* 1 byte for op, 1 for gpio_nr, 1 for value */
                        break;
                default:
                        return 0;
                }
        }

        return 0;
}

/*
 * Some v1 VBT MIPI sequences do the deassert in the init OTP sequence.
 * The deassert must be done before calling intel_dsi_device_ready, so for
 * these devices we split the init OTP sequence into a deassert sequence and
 * the actual init OTP part.
 */
static void fixup_mipi_sequences(struct drm_i915_private *dev_priv)
{
        u8 *init_otp;
        int len;

        /* Limit this to VLV for now. */
        if (!IS_VALLEYVIEW(dev_priv))
                return;

        /* Limit this to v1 vid-mode sequences */
        if (dev_priv->vbt.dsi.config->is_cmd_mode ||
            dev_priv->vbt.dsi.seq_version != 1)
                return;

        /* Only do this if there are otp and assert seqs and no deassert seq */
        if (!dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP] ||
            !dev_priv->vbt.dsi.sequence[MIPI_SEQ_ASSERT_RESET] ||
            dev_priv->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET])
                return;

        /* The deassert-sequence ends at the first DSI packet */
        len = get_init_otp_deassert_fragment_len(dev_priv);
        if (!len)
                return;

        drm_dbg_kms(&dev_priv->drm,
                    "Using init OTP fragment to deassert reset\n");

        /* Copy the fragment, update seq byte and terminate it */
        init_otp = (u8 *)dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP];
        dev_priv->vbt.dsi.deassert_seq = kmemdup(init_otp, len + 1, GFP_KERNEL);
        if (!dev_priv->vbt.dsi.deassert_seq)
                return;
        dev_priv->vbt.dsi.deassert_seq[0] = MIPI_SEQ_DEASSERT_RESET;
        dev_priv->vbt.dsi.deassert_seq[len] = MIPI_SEQ_ELEM_END;
        /* Use the copy for deassert */
        dev_priv->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET] =
                dev_priv->vbt.dsi.deassert_seq;
        /* Replace the last byte of the fragment with init OTP seq byte */
        init_otp[len - 1] = MIPI_SEQ_INIT_OTP;
        /* And make MIPI_MIPI_SEQ_INIT_OTP point to it */
        dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP] = init_otp + len - 1;
}

static void
parse_mipi_sequence(struct drm_i915_private *dev_priv,
                    const struct bdb_header *bdb)
{
        int panel_type = dev_priv->vbt.panel_type;
        const struct bdb_mipi_sequence *sequence;
        const u8 *seq_data;
        u32 seq_size;
        u8 *data;
        int index = 0;

        /* Only our generic panel driver uses the sequence block. */
        if (dev_priv->vbt.dsi.panel_id != MIPI_DSI_GENERIC_PANEL_ID)
                return;

        sequence = find_section(bdb, BDB_MIPI_SEQUENCE);
        if (!sequence) {
                drm_dbg_kms(&dev_priv->drm,
                            "No MIPI Sequence found, parsing complete\n");
                return;
        }

        /* Fail gracefully for forward incompatible sequence block. */
        if (sequence->version >= 4) {
                drm_err(&dev_priv->drm,
                        "Unable to parse MIPI Sequence Block v%u\n",
                        sequence->version);
                return;
        }

        drm_dbg(&dev_priv->drm, "Found MIPI sequence block v%u\n",
                sequence->version);

        seq_data = find_panel_sequence_block(sequence, panel_type, &seq_size);
        if (!seq_data)
                return;

        data = kmemdup(seq_data, seq_size, GFP_KERNEL);
        if (!data)
                return;

        /* Parse the sequences, store pointers to each sequence. */
        for (;;) {
                u8 seq_id = *(data + index);
                if (seq_id == MIPI_SEQ_END)
                        break;

                if (seq_id >= MIPI_SEQ_MAX) {
                        drm_err(&dev_priv->drm, "Unknown sequence %u\n",
                                seq_id);
                        goto err;
                }

                /* Log about presence of sequences we won't run. */
                if (seq_id == MIPI_SEQ_TEAR_ON || seq_id == MIPI_SEQ_TEAR_OFF)
                        drm_dbg_kms(&dev_priv->drm,
                                    "Unsupported sequence %u\n", seq_id);

                dev_priv->vbt.dsi.sequence[seq_id] = data + index;

                if (sequence->version >= 3)
                        index = goto_next_sequence_v3(data, index, seq_size);
                else
                        index = goto_next_sequence(data, index, seq_size);
                if (!index) {
                        drm_err(&dev_priv->drm, "Invalid sequence %u\n",
                                seq_id);
                        goto err;
                }
        }

        dev_priv->vbt.dsi.data = data;
        dev_priv->vbt.dsi.size = seq_size;
        dev_priv->vbt.dsi.seq_version = sequence->version;

        fixup_mipi_sequences(dev_priv);

        drm_dbg(&dev_priv->drm, "MIPI related VBT parsing complete\n");
        return;

err:
        kfree(data);
        memset(dev_priv->vbt.dsi.sequence, 0, sizeof(dev_priv->vbt.dsi.sequence));
}

static void
parse_compression_parameters(struct drm_i915_private *i915,
                             const struct bdb_header *bdb)
{
        const struct bdb_compression_parameters *params;
        struct display_device_data *devdata;
        const struct child_device_config *child;
        u16 block_size;
        int index;

        if (bdb->version < 198)
                return;

        params = find_section(bdb, BDB_COMPRESSION_PARAMETERS);
        if (params) {
                /* Sanity checks */
                if (params->entry_size != sizeof(params->data[0])) {
                        drm_dbg_kms(&i915->drm,
                                    "VBT: unsupported compression param entry size\n");
                        return;
                }

                block_size = get_blocksize(params);
                if (block_size < sizeof(*params)) {
                        drm_dbg_kms(&i915->drm,
                                    "VBT: expected 16 compression param entries\n");
                        return;
                }
        }

        list_for_each_entry(devdata, &i915->vbt.display_devices, node) {
                child = &devdata->child;

                if (!child->compression_enable)
                        continue;

                if (!params) {
                        drm_dbg_kms(&i915->drm,
                                    "VBT: compression params not available\n");
                        continue;
                }

                if (child->compression_method_cps) {
                        drm_dbg_kms(&i915->drm,
                                    "VBT: CPS compression not supported\n");
                        continue;
                }

                index = child->compression_structure_index;

                devdata->dsc = kmemdup(&params->data[index],
                                       sizeof(*devdata->dsc), GFP_KERNEL);
        }
}

static u8 translate_iboost(u8 val)
{
        static const u8 mapping[] = { 1, 3, 7 }; /* See VBT spec */

        if (val >= ARRAY_SIZE(mapping)) {
                DRM_DEBUG_KMS("Unsupported I_boost value found in VBT (%d), display may not work properly\n", val);
                return 0;
        }
        return mapping[val];
}

static enum port get_port_by_ddc_pin(struct drm_i915_private *i915, u8 ddc_pin)
{
        const struct ddi_vbt_port_info *info;
        enum port port;

        for_each_port(port) {
                info = &i915->vbt.ddi_port_info[port];

                if (info->child && ddc_pin == info->alternate_ddc_pin)
                        return port;
        }

        return PORT_NONE;
}

static void sanitize_ddc_pin(struct drm_i915_private *dev_priv,
                             enum port port)
{
        struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port];
        enum port p;

        if (!info->alternate_ddc_pin)
                return;

        p = get_port_by_ddc_pin(dev_priv, info->alternate_ddc_pin);
        if (p != PORT_NONE) {
                drm_dbg_kms(&dev_priv->drm,
                            "port %c trying to use the same DDC pin (0x%x) as port %c, "
                            "disabling port %c DVI/HDMI support\n",
                            port_name(port), info->alternate_ddc_pin,
                            port_name(p), port_name(p));

                /*
                 * If we have multiple ports supposedly sharing the
                 * pin, then dvi/hdmi couldn't exist on the shared
                 * port. Otherwise they share the same ddc bin and
                 * system couldn't communicate with them separately.
                 *
                 * Give inverse child device order the priority,
                 * last one wins. Yes, there are real machines
                 * (eg. Asrock B250M-HDV) where VBT has both
                 * port A and port E with the same AUX ch and
                 * we must pick port E :(
                 */
                info = &dev_priv->vbt.ddi_port_info[p];

                info->supports_dvi = false;
                info->supports_hdmi = false;
                info->alternate_ddc_pin = 0;
        }
}

static enum port get_port_by_aux_ch(struct drm_i915_private *i915, u8 aux_ch)
{
        const struct ddi_vbt_port_info *info;
        enum port port;

        for_each_port(port) {
                info = &i915->vbt.ddi_port_info[port];

                if (info->child && aux_ch == info->alternate_aux_channel)
                        return port;
        }

        return PORT_NONE;
}

static void sanitize_aux_ch(struct drm_i915_private *dev_priv,
                            enum port port)
{
        struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port];
        enum port p;

        if (!info->alternate_aux_channel)
                return;

        p = get_port_by_aux_ch(dev_priv, info->alternate_aux_channel);
        if (p != PORT_NONE) {
                drm_dbg_kms(&dev_priv->drm,
                            "port %c trying to use the same AUX CH (0x%x) as port %c, "
                            "disabling port %c DP support\n",
                            port_name(port), info->alternate_aux_channel,
                            port_name(p), port_name(p));

                /*
                 * If we have multiple ports supposedlt sharing the
                 * aux channel, then DP couldn't exist on the shared
                 * port. Otherwise they share the same aux channel
                 * and system couldn't communicate with them separately.
                 *
                 * Give inverse child device order the priority,
                 * last one wins. Yes, there are real machines
                 * (eg. Asrock B250M-HDV) where VBT has both
                 * port A and port E with the same AUX ch and
                 * we must pick port E :(
                 */
                info = &dev_priv->vbt.ddi_port_info[p];

                info->supports_dp = false;
                info->alternate_aux_channel = 0;
        }
}

static const u8 cnp_ddc_pin_map[] = {
        [0] = 0, /* N/A */
        [DDC_BUS_DDI_B] = GMBUS_PIN_1_BXT,
        [DDC_BUS_DDI_C] = GMBUS_PIN_2_BXT,
        [DDC_BUS_DDI_D] = GMBUS_PIN_4_CNP, /* sic */
        [DDC_BUS_DDI_F] = GMBUS_PIN_3_BXT, /* sic */
};

static const u8 icp_ddc_pin_map[] = {
        [ICL_DDC_BUS_DDI_A] = GMBUS_PIN_1_BXT,
        [ICL_DDC_BUS_DDI_B] = GMBUS_PIN_2_BXT,
        [TGL_DDC_BUS_DDI_C] = GMBUS_PIN_3_BXT,
        [ICL_DDC_BUS_PORT_1] = GMBUS_PIN_9_TC1_ICP,
        [ICL_DDC_BUS_PORT_2] = GMBUS_PIN_10_TC2_ICP,
        [ICL_DDC_BUS_PORT_3] = GMBUS_PIN_11_TC3_ICP,
        [ICL_DDC_BUS_PORT_4] = GMBUS_PIN_12_TC4_ICP,
        [TGL_DDC_BUS_PORT_5] = GMBUS_PIN_13_TC5_TGP,
        [TGL_DDC_BUS_PORT_6] = GMBUS_PIN_14_TC6_TGP,
};

static u8 map_ddc_pin(struct drm_i915_private *dev_priv, u8 vbt_pin)
{
        const u8 *ddc_pin_map;
        int n_entries;

        if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1) {
                return vbt_pin;
        } else if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP) {
                ddc_pin_map = icp_ddc_pin_map;
                n_entries = ARRAY_SIZE(icp_ddc_pin_map);
        } else if (HAS_PCH_CNP(dev_priv)) {
                ddc_pin_map = cnp_ddc_pin_map;
                n_entries = ARRAY_SIZE(cnp_ddc_pin_map);
        } else {
                /* Assuming direct map */
                return vbt_pin;
        }

        if (vbt_pin < n_entries && ddc_pin_map[vbt_pin] != 0)
                return ddc_pin_map[vbt_pin];

        drm_dbg_kms(&dev_priv->drm,
                    "Ignoring alternate pin: VBT claims DDC pin %d, which is not valid for this platform\n",
                    vbt_pin);
        return 0;
}

static enum port __dvo_port_to_port(int n_ports, int n_dvo,
                                    const int port_mapping[][3], u8 dvo_port)
{
        enum port port;
        int i;

        for (port = PORT_A; port < n_ports; port++) {
                for (i = 0; i < n_dvo; i++) {
                        if (port_mapping[port][i] == -1)
                                break;

                        if (dvo_port == port_mapping[port][i])
                                return port;
                }
        }

        return PORT_NONE;
}

static enum port dvo_port_to_port(struct drm_i915_private *dev_priv,
                                  u8 dvo_port)
{
        /*
         * Each DDI port can have more than one value on the "DVO Port" field,
         * so look for all the possible values for each port.
         */
        static const int port_mapping[][3] = {
                [PORT_A] = { DVO_PORT_HDMIA, DVO_PORT_DPA, -1 },
                [PORT_B] = { DVO_PORT_HDMIB, DVO_PORT_DPB, -1 },
                [PORT_C] = { DVO_PORT_HDMIC, DVO_PORT_DPC, -1 },
                [PORT_D] = { DVO_PORT_HDMID, DVO_PORT_DPD, -1 },
                [PORT_E] = { DVO_PORT_HDMIE, DVO_PORT_DPE, DVO_PORT_CRT },
                [PORT_F] = { DVO_PORT_HDMIF, DVO_PORT_DPF, -1 },
                [PORT_G] = { DVO_PORT_HDMIG, DVO_PORT_DPG, -1 },
                [PORT_H] = { DVO_PORT_HDMIH, DVO_PORT_DPH, -1 },
                [PORT_I] = { DVO_PORT_HDMII, DVO_PORT_DPI, -1 },
        };
        /*
         * RKL VBT uses PHY based mapping. Combo PHYs A,B,C,D
         * map to DDI A,B,TC1,TC2 respectively.
         */
        static const int rkl_port_mapping[][3] = {
                [PORT_A] = { DVO_PORT_HDMIA, DVO_PORT_DPA, -1 },
                [PORT_B] = { DVO_PORT_HDMIB, DVO_PORT_DPB, -1 },
                [PORT_C] = { -1 },
                [PORT_TC1] = { DVO_PORT_HDMIC, DVO_PORT_DPC, -1 },
                [PORT_TC2] = { DVO_PORT_HDMID, DVO_PORT_DPD, -1 },
        };

        if (IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv))
                return __dvo_port_to_port(ARRAY_SIZE(rkl_port_mapping),
                                          ARRAY_SIZE(rkl_port_mapping[0]),
                                          rkl_port_mapping,
                                          dvo_port);
        else
                return __dvo_port_to_port(ARRAY_SIZE(port_mapping),
                                          ARRAY_SIZE(port_mapping[0]),
                                          port_mapping,
                                          dvo_port);
}

static void parse_ddi_port(struct drm_i915_private *dev_priv,
                           struct display_device_data *devdata,
                           u8 bdb_version)
{
        const struct child_device_config *child = &devdata->child;
        struct ddi_vbt_port_info *info;
        bool is_dvi, is_hdmi, is_dp, is_edp, is_crt;
        enum port port;

        port = dvo_port_to_port(dev_priv, child->dvo_port);
        if (port == PORT_NONE)
                return;

        info = &dev_priv->vbt.ddi_port_info[port];

        if (info->child) {
                drm_dbg_kms(&dev_priv->drm,
                            "More than one child device for port %c in VBT, using the first.\n",
                            port_name(port));
                return;
        }

        is_dvi = child->device_type & DEVICE_TYPE_TMDS_DVI_SIGNALING;
        is_dp = child->device_type & DEVICE_TYPE_DISPLAYPORT_OUTPUT;
        is_crt = child->device_type & DEVICE_TYPE_ANALOG_OUTPUT;
        is_hdmi = is_dvi && (child->device_type & DEVICE_TYPE_NOT_HDMI_OUTPUT) == 0;
        is_edp = is_dp && (child->device_type & DEVICE_TYPE_INTERNAL_CONNECTOR);

        if (port == PORT_A && is_dvi && INTEL_GEN(dev_priv) < 12) {
                drm_dbg_kms(&dev_priv->drm,
                            "VBT claims port A supports DVI%s, ignoring\n",
                            is_hdmi ? "/HDMI" : "");
                is_dvi = false;
                is_hdmi = false;
        }

        info->supports_dvi = is_dvi;
        info->supports_hdmi = is_hdmi;
        info->supports_dp = is_dp;
        info->supports_edp = is_edp;

        if (bdb_version >= 195)
                info->supports_typec_usb = child->dp_usb_type_c;

        if (bdb_version >= 209)
                info->supports_tbt = child->tbt;

        drm_dbg_kms(&dev_priv->drm,
                    "Port %c VBT info: CRT:%d DVI:%d HDMI:%d DP:%d eDP:%d LSPCON:%d USB-Type-C:%d TBT:%d DSC:%d\n",
                    port_name(port), is_crt, is_dvi, is_hdmi, is_dp, is_edp,
                    HAS_LSPCON(dev_priv) && child->lspcon,
                    info->supports_typec_usb, info->supports_tbt,
                    devdata->dsc != NULL);

        if (is_dvi) {
                u8 ddc_pin;

                ddc_pin = map_ddc_pin(dev_priv, child->ddc_pin);
                if (intel_gmbus_is_valid_pin(dev_priv, ddc_pin)) {
                        info->alternate_ddc_pin = ddc_pin;
                        sanitize_ddc_pin(dev_priv, port);
                } else {
                        drm_dbg_kms(&dev_priv->drm,
                                    "Port %c has invalid DDC pin %d, "
                                    "sticking to defaults\n",
                                    port_name(port), ddc_pin);
                }
        }

        if (is_dp) {
                info->alternate_aux_channel = child->aux_channel;

                sanitize_aux_ch(dev_priv, port);
        }

        if (bdb_version >= 158) {
                /* The VBT HDMI level shift values match the table we have. */
                u8 hdmi_level_shift = child->hdmi_level_shifter_value;
                drm_dbg_kms(&dev_priv->drm,
                            "VBT HDMI level shift for port %c: %d\n",
                            port_name(port),
                            hdmi_level_shift);
                info->hdmi_level_shift = hdmi_level_shift;
                info->hdmi_level_shift_set = true;
        }

        if (bdb_version >= 204) {
                int max_tmds_clock;

                switch (child->hdmi_max_data_rate) {
                default:
                        MISSING_CASE(child->hdmi_max_data_rate);
                        fallthrough;
                case HDMI_MAX_DATA_RATE_PLATFORM:
                        max_tmds_clock = 0;
                        break;
                case HDMI_MAX_DATA_RATE_297:
                        max_tmds_clock = 297000;
                        break;
                case HDMI_MAX_DATA_RATE_165:
                        max_tmds_clock = 165000;
                        break;
                }

                if (max_tmds_clock)
                        drm_dbg_kms(&dev_priv->drm,
                                    "VBT HDMI max TMDS clock for port %c: %d kHz\n",
                                    port_name(port), max_tmds_clock);
                info->max_tmds_clock = max_tmds_clock;
        }

        /* Parse the I_boost config for SKL and above */
        if (bdb_version >= 196 && child->iboost) {
                info->dp_boost_level = translate_iboost(child->dp_iboost_level);
                drm_dbg_kms(&dev_priv->drm,
                            "VBT (e)DP boost level for port %c: %d\n",
                            port_name(port), info->dp_boost_level);
                info->hdmi_boost_level = translate_iboost(child->hdmi_iboost_level);
                drm_dbg_kms(&dev_priv->drm,
                            "VBT HDMI boost level for port %c: %d\n",
                            port_name(port), info->hdmi_boost_level);
        }

        /* DP max link rate for CNL+ */
        if (bdb_version >= 216) {
                switch (child->dp_max_link_rate) {
                default:
                case VBT_DP_MAX_LINK_RATE_HBR3:
                        info->dp_max_link_rate = 810000;
                        break;
                case VBT_DP_MAX_LINK_RATE_HBR2:
                        info->dp_max_link_rate = 540000;
                        break;
                case VBT_DP_MAX_LINK_RATE_HBR:
                        info->dp_max_link_rate = 270000;
                        break;
                case VBT_DP_MAX_LINK_RATE_LBR:
                        info->dp_max_link_rate = 162000;
                        break;
                }
                drm_dbg_kms(&dev_priv->drm,
                            "VBT DP max link rate for port %c: %d\n",
                            port_name(port), info->dp_max_link_rate);
        }

        info->child = child;
}

static void parse_ddi_ports(struct drm_i915_private *dev_priv, u8 bdb_version)
{
        struct display_device_data *devdata;

        if (!HAS_DDI(dev_priv) && !IS_CHERRYVIEW(dev_priv))
                return;

        if (bdb_version < 155)
                return;

        list_for_each_entry(devdata, &dev_priv->vbt.display_devices, node)
                parse_ddi_port(dev_priv, devdata, bdb_version);
}

static void
parse_general_definitions(struct drm_i915_private *dev_priv,
                          const struct bdb_header *bdb)
{
        const struct bdb_general_definitions *defs;
        struct display_device_data *devdata;
        const struct child_device_config *child;
        int i, child_device_num;
        u8 expected_size;
        u16 block_size;
        int bus_pin;

        defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
        if (!defs) {
                drm_dbg_kms(&dev_priv->drm,
                            "No general definition block is found, no devices defined.\n");
                return;
        }

        block_size = get_blocksize(defs);
        if (block_size < sizeof(*defs)) {
                drm_dbg_kms(&dev_priv->drm,
                            "General definitions block too small (%u)\n",
                            block_size);
                return;
        }

        bus_pin = defs->crt_ddc_gmbus_pin;
        drm_dbg_kms(&dev_priv->drm, "crt_ddc_bus_pin: %d\n", bus_pin);
        if (intel_gmbus_is_valid_pin(dev_priv, bus_pin))
                dev_priv->vbt.crt_ddc_pin = bus_pin;

        if (bdb->version < 106) {
                expected_size = 22;
        } else if (bdb->version < 111) {
                expected_size = 27;
        } else if (bdb->version < 195) {
                expected_size = LEGACY_CHILD_DEVICE_CONFIG_SIZE;
        } else if (bdb->version == 195) {
                expected_size = 37;
        } else if (bdb->version <= 215) {
                expected_size = 38;
        } else if (bdb->version <= 237) {
                expected_size = 39;
        } else {
                expected_size = sizeof(*child);
                BUILD_BUG_ON(sizeof(*child) < 39);
                drm_dbg(&dev_priv->drm,
                        "Expected child device config size for VBT version %u not known; assuming %u\n",
                        bdb->version, expected_size);
        }

        /* Flag an error for unexpected size, but continue anyway. */
        if (defs->child_dev_size != expected_size)
                drm_err(&dev_priv->drm,
                        "Unexpected child device config size %u (expected %u for VBT version %u)\n",
                        defs->child_dev_size, expected_size, bdb->version);

        /* The legacy sized child device config is the minimum we need. */
        if (defs->child_dev_size < LEGACY_CHILD_DEVICE_CONFIG_SIZE) {
                drm_dbg_kms(&dev_priv->drm,
                            "Child device config size %u is too small.\n",
                            defs->child_dev_size);
                return;
        }

        /* get the number of child device */
        child_device_num = (block_size - sizeof(*defs)) / defs->child_dev_size;

        for (i = 0; i < child_device_num; i++) {
                child = child_device_ptr(defs, i);
                if (!child->device_type)
                        continue;

                drm_dbg_kms(&dev_priv->drm,
                            "Found VBT child device with type 0x%x\n",
                            child->device_type);

                devdata = kzalloc(sizeof(*devdata), GFP_KERNEL);
                if (!devdata)
                        break;

                /*
                 * Copy as much as we know (sizeof) and is available
                 * (child_dev_size) of the child device config. Accessing the
                 * data must depend on VBT version.
                 */
                memcpy(&devdata->child, child,
                       min_t(size_t, defs->child_dev_size, sizeof(*child)));

                list_add_tail(&devdata->node, &dev_priv->vbt.display_devices);
        }

        if (list_empty(&dev_priv->vbt.display_devices))
                drm_dbg_kms(&dev_priv->drm,
                            "no child dev is parsed from VBT\n");
}

/* Common defaults which may be overridden by VBT. */
static void
init_vbt_defaults(struct drm_i915_private *dev_priv)
{
        dev_priv->vbt.crt_ddc_pin = GMBUS_PIN_VGADDC;

        /* Default to having backlight */
        dev_priv->vbt.backlight.present = true;

        /* LFP panel data */
        dev_priv->vbt.lvds_dither = 1;

        /* SDVO panel data */
        dev_priv->vbt.sdvo_lvds_vbt_mode = NULL;

        /* general features */
        dev_priv->vbt.int_tv_support = 1;
        dev_priv->vbt.int_crt_support = 1;

        /* driver features */
        dev_priv->vbt.int_lvds_support = 1;

        /* Default to using SSC */
        dev_priv->vbt.lvds_use_ssc = 1;
        /*
         * Core/SandyBridge/IvyBridge use alternative (120MHz) reference
         * clock for LVDS.

         */
        dev_priv->vbt.lvds_ssc_freq = intel_bios_ssc_frequency(dev_priv,
                        !HAS_PCH_SPLIT(dev_priv));
        drm_dbg_kms(&dev_priv->drm, "Set default to SSC at %d kHz\n",
                    dev_priv->vbt.lvds_ssc_freq);
}

/* Defaults to initialize only if there is no VBT. */
static void
init_vbt_missing_defaults(struct drm_i915_private *dev_priv)
{
        enum port port;

        for_each_port(port) {
                struct ddi_vbt_port_info *info =
                        &dev_priv->vbt.ddi_port_info[port];
                enum phy phy = intel_port_to_phy(dev_priv, port);

                /*
                 * VBT has the TypeC mode (native,TBT/USB) and we don't want
                 * to detect it.
                 */
                if (intel_phy_is_tc(dev_priv, phy))
                        continue;

                info->supports_dvi = (port != PORT_A && port != PORT_E);
                info->supports_hdmi = info->supports_dvi;
                info->supports_dp = (port != PORT_E);
                info->supports_edp = (port == PORT_A);
        }
}

static const struct bdb_header *get_bdb_header(const struct vbt_header *vbt)
{
        const void *_vbt = vbt;

        return _vbt + vbt->bdb_offset;
}

/**
 * intel_bios_is_valid_vbt - does the given buffer contain a valid VBT
 * @buf:        pointer to a buffer to validate
 * @size:       size of the buffer
 *
 * Returns true on valid VBT.
 */
bool intel_bios_is_valid_vbt(const void *buf, size_t size)
{
        const struct vbt_header *vbt = buf;
        const struct bdb_header *bdb;

        if (!vbt)
                return false;

        if (sizeof(struct vbt_header) > size) {
                DRM_DEBUG_DRIVER("VBT header incomplete\n");
                return false;
        }

        if (memcmp(vbt->signature, "$VBT", 4)) {
                DRM_DEBUG_DRIVER("VBT invalid signature\n");
                return false;
        }

        if (vbt->vbt_size > size) {
                DRM_DEBUG_DRIVER("VBT incomplete (vbt_size overflows)\n");
                return false;
        }

        size = vbt->vbt_size;

        if (range_overflows_t(size_t,
                              vbt->bdb_offset,
                              sizeof(struct bdb_header),
                              size)) {
                DRM_DEBUG_DRIVER("BDB header incomplete\n");
                return false;
        }

        bdb = get_bdb_header(vbt);
        if (range_overflows_t(size_t, vbt->bdb_offset, bdb->bdb_size, size)) {
                DRM_DEBUG_DRIVER("BDB incomplete\n");
                return false;
        }

        return vbt;
}

static struct vbt_header *oprom_get_vbt(struct drm_i915_private *dev_priv)
{
        struct pci_dev *pdev = dev_priv->drm.pdev;
        void __iomem *p = NULL, *oprom;
        struct vbt_header *vbt;
        u16 vbt_size;
        size_t i, size;

        oprom = pci_map_rom(pdev, &size);
        if (!oprom)
                return NULL;

        /* Scour memory looking for the VBT signature. */
        for (i = 0; i + 4 < size; i += 4) {
                if (ioread32(oprom + i) != *((const u32 *)"$VBT"))
                        continue;

                p = oprom + i;
                size -= i;
                break;
        }

        if (!p)
                goto err_unmap_oprom;

        if (sizeof(struct vbt_header) > size) {
                drm_dbg(&dev_priv->drm, "VBT header incomplete\n");
                goto err_unmap_oprom;
        }

        vbt_size = ioread16(p + offsetof(struct vbt_header, vbt_size));
        if (vbt_size > size) {
                drm_dbg(&dev_priv->drm,
                        "VBT incomplete (vbt_size overflows)\n");
                goto err_unmap_oprom;
        }

        /* The rest will be validated by intel_bios_is_valid_vbt() */
        vbt = kmalloc(vbt_size, GFP_KERNEL);
        if (!vbt)
                goto err_unmap_oprom;

        memcpy_fromio(vbt, p, vbt_size);

        if (!intel_bios_is_valid_vbt(vbt, vbt_size))
                goto err_free_vbt;

        pci_unmap_rom(pdev, oprom);

        return vbt;

err_free_vbt:
        kfree(vbt);
err_unmap_oprom:
        pci_unmap_rom(pdev, oprom);

        return NULL;
}

/**
 * intel_bios_init - find VBT and initialize settings from the BIOS
 * @dev_priv: i915 device instance
 *
 * Parse and initialize settings from the Video BIOS Tables (VBT). If the VBT
 * was not found in ACPI OpRegion, try to find it in PCI ROM first. Also
 * initialize some defaults if the VBT is not present at all.
 */
void intel_bios_init(struct drm_i915_private *dev_priv)
{
        const struct vbt_header *vbt = dev_priv->opregion.vbt;
        struct vbt_header *oprom_vbt = NULL;
        const struct bdb_header *bdb;

        INIT_LIST_HEAD(&dev_priv->vbt.display_devices);

        if (!HAS_DISPLAY(dev_priv)) {
                drm_dbg_kms(&dev_priv->drm,
                            "Skipping VBT init due to disabled display.\n");
                return;
        }

        init_vbt_defaults(dev_priv);

        /* If the OpRegion does not have VBT, look in PCI ROM. */
        if (!vbt) {
                oprom_vbt = oprom_get_vbt(dev_priv);
                if (!oprom_vbt)
                        goto out;

                vbt = oprom_vbt;

                drm_dbg_kms(&dev_priv->drm, "Found valid VBT in PCI ROM\n");
        }

        bdb = get_bdb_header(vbt);

        drm_dbg_kms(&dev_priv->drm,
                    "VBT signature \"%.*s\", BDB version %d\n",
                    (int)sizeof(vbt->signature), vbt->signature, bdb->version);

        /* Grab useful general definitions */
        parse_general_features(dev_priv, bdb);
        parse_general_definitions(dev_priv, bdb);
        parse_panel_options(dev_priv, bdb);
        parse_panel_dtd(dev_priv, bdb);
        parse_lfp_backlight(dev_priv, bdb);
        parse_sdvo_panel_data(dev_priv, bdb);
        parse_driver_features(dev_priv, bdb);
        parse_power_conservation_features(dev_priv, bdb);
        parse_edp(dev_priv, bdb);
        parse_psr(dev_priv, bdb);
        parse_mipi_config(dev_priv, bdb);
        parse_mipi_sequence(dev_priv, bdb);

        /* Depends on child device list */
        parse_compression_parameters(dev_priv, bdb);

        /* Further processing on pre-parsed data */
        parse_sdvo_device_mapping(dev_priv, bdb->version);
        parse_ddi_ports(dev_priv, bdb->version);

out:
        if (!vbt) {
                drm_info(&dev_priv->drm,
                         "Failed to find VBIOS tables (VBT)\n");
                init_vbt_missing_defaults(dev_priv);
        }

        kfree(oprom_vbt);
}

/**
 * intel_bios_driver_remove - Free any resources allocated by intel_bios_init()
 * @dev_priv: i915 device instance
 */
void intel_bios_driver_remove(struct drm_i915_private *dev_priv)
{
        struct display_device_data *devdata, *n;

        list_for_each_entry_safe(devdata, n, &dev_priv->vbt.display_devices, node) {
                list_del(&devdata->node);
                kfree(devdata->dsc);
                kfree(devdata);
        }

        kfree(dev_priv->vbt.sdvo_lvds_vbt_mode);
        dev_priv->vbt.sdvo_lvds_vbt_mode = NULL;
        kfree(dev_priv->vbt.lfp_lvds_vbt_mode);
        dev_priv->vbt.lfp_lvds_vbt_mode = NULL;
        kfree(dev_priv->vbt.dsi.data);
        dev_priv->vbt.dsi.data = NULL;
        kfree(dev_priv->vbt.dsi.pps);
        dev_priv->vbt.dsi.pps = NULL;
        kfree(dev_priv->vbt.dsi.config);
        dev_priv->vbt.dsi.config = NULL;
        kfree(dev_priv->vbt.dsi.deassert_seq);
        dev_priv->vbt.dsi.deassert_seq = NULL;
}

/**
 * intel_bios_is_tv_present - is integrated TV present in VBT
 * @dev_priv:   i915 device instance
 *
 * Return true if TV is present. If no child devices were parsed from VBT,
 * assume TV is present.
 */
bool intel_bios_is_tv_present(struct drm_i915_private *dev_priv)
{
        const struct display_device_data *devdata;
        const struct child_device_config *child;

        if (!dev_priv->vbt.int_tv_support)
                return false;

        if (list_empty(&dev_priv->vbt.display_devices))
                return true;

        list_for_each_entry(devdata, &dev_priv->vbt.display_devices, node) {
                child = &devdata->child;

                /*
                 * If the device type is not TV, continue.
                 */
                switch (child->device_type) {
                case DEVICE_TYPE_INT_TV:
                case DEVICE_TYPE_TV:
                case DEVICE_TYPE_TV_SVIDEO_COMPOSITE:
                        break;
                default:
                        continue;
                }
                /* Only when the addin_offset is non-zero, it is regarded
                 * as present.
                 */
                if (child->addin_offset)
                        return true;
        }

        return false;
}

/**
 * intel_bios_is_lvds_present - is LVDS present in VBT
 * @dev_priv:   i915 device instance
 * @i2c_pin:    i2c pin for LVDS if present
 *
 * Return true if LVDS is present. If no child devices were parsed from VBT,
 * assume LVDS is present.
 */
bool intel_bios_is_lvds_present(struct drm_i915_private *dev_priv, u8 *i2c_pin)
{
        const struct display_device_data *devdata;
        const struct child_device_config *child;

        if (list_empty(&dev_priv->vbt.display_devices))
                return true;

        list_for_each_entry(devdata, &dev_priv->vbt.display_devices, node) {
                child = &devdata->child;

                /* If the device type is not LFP, continue.
                 * We have to check both the new identifiers as well as the
                 * old for compatibility with some BIOSes.
                 */
                if (child->device_type != DEVICE_TYPE_INT_LFP &&
                    child->device_type != DEVICE_TYPE_LFP)
                        continue;

                if (intel_gmbus_is_valid_pin(dev_priv, child->i2c_pin))
                        *i2c_pin = child->i2c_pin;

                /* However, we cannot trust the BIOS writers to populate
                 * the VBT correctly.  Since LVDS requires additional
                 * information from AIM blocks, a non-zero addin offset is
                 * a good indicator that the LVDS is actually present.
                 */
                if (child->addin_offset)
                        return true;

                /* But even then some BIOS writers perform some black magic
                 * and instantiate the device without reference to any
                 * additional data.  Trust that if the VBT was written into
                 * the OpRegion then they have validated the LVDS's existence.
                 */
                if (dev_priv->opregion.vbt)
                        return true;
        }

        return false;
}

/**
 * intel_bios_is_port_present - is the specified digital port present
 * @dev_priv:   i915 device instance
 * @port:       port to check
 *
 * Return true if the device in %port is present.
 */
bool intel_bios_is_port_present(struct drm_i915_private *dev_priv, enum port port)
{
        const struct display_device_data *devdata;
        const struct child_device_config *child;
        static const struct {
                u16 dp, hdmi;
        } port_mapping[] = {
                [PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, },
                [PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
                [PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
                [PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
                [PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, },
        };

        if (HAS_DDI(dev_priv)) {
                const struct ddi_vbt_port_info *port_info =
                        &dev_priv->vbt.ddi_port_info[port];

                return port_info->child;
        }

        /* FIXME maybe deal with port A as well? */
        if (drm_WARN_ON(&dev_priv->drm,
                        port == PORT_A) || port >= ARRAY_SIZE(port_mapping))
                return false;

        list_for_each_entry(devdata, &dev_priv->vbt.display_devices, node) {
                child = &devdata->child;

                if ((child->dvo_port == port_mapping[port].dp ||
                     child->dvo_port == port_mapping[port].hdmi) &&
                    (child->device_type & (DEVICE_TYPE_TMDS_DVI_SIGNALING |
                                           DEVICE_TYPE_DISPLAYPORT_OUTPUT)))
                        return true;
        }

        return false;
}

/**
 * intel_bios_is_port_edp - is the device in given port eDP
 * @dev_priv:   i915 device instance
 * @port:       port to check
 *
 * Return true if the device in %port is eDP.
 */
bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port)
{
        const struct display_device_data *devdata;
        const struct child_device_config *child;
        static const short port_mapping[] = {
                [PORT_B] = DVO_PORT_DPB,
                [PORT_C] = DVO_PORT_DPC,
                [PORT_D] = DVO_PORT_DPD,
                [PORT_E] = DVO_PORT_DPE,
                [PORT_F] = DVO_PORT_DPF,
        };

        if (HAS_DDI(dev_priv))
                return dev_priv->vbt.ddi_port_info[port].supports_edp;

        list_for_each_entry(devdata, &dev_priv->vbt.display_devices, node) {
                child = &devdata->child;

                if (child->dvo_port == port_mapping[port] &&
                    (child->device_type & DEVICE_TYPE_eDP_BITS) ==
                    (DEVICE_TYPE_eDP & DEVICE_TYPE_eDP_BITS))
                        return true;
        }

        return false;
}

static bool child_dev_is_dp_dual_mode(const struct child_device_config *child,
                                      enum port port)
{
        static const struct {
                u16 dp, hdmi;
        } port_mapping[] = {
                /*
                 * Buggy VBTs may declare DP ports as having
                 * HDMI type dvo_port :( So let's check both.
                 */
                [PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, },
                [PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
                [PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
                [PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
                [PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, },
        };

        if (port == PORT_A || port >= ARRAY_SIZE(port_mapping))
                return false;

        if ((child->device_type & DEVICE_TYPE_DP_DUAL_MODE_BITS) !=
            (DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS))
                return false;

        if (child->dvo_port == port_mapping[port].dp)
                return true;

        /* Only accept a HDMI dvo_port as DP++ if it has an AUX channel */
        if (child->dvo_port == port_mapping[port].hdmi &&
            child->aux_channel != 0)
                return true;

        return false;
}

bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv,
                                     enum port port)
{
        const struct display_device_data *devdata;

        list_for_each_entry(devdata, &dev_priv->vbt.display_devices, node) {
                if (child_dev_is_dp_dual_mode(&devdata->child, port))
                        return true;
        }

        return false;
}

/**
 * intel_bios_is_dsi_present - is DSI present in VBT
 * @dev_priv:   i915 device instance
 * @port:       port for DSI if present
 *
 * Return true if DSI is present, and return the port in %port.
 */
bool intel_bios_is_dsi_present(struct drm_i915_private *dev_priv,
                               enum port *port)
{
        const struct display_device_data *devdata;
        const struct child_device_config *child;
        u8 dvo_port;

        list_for_each_entry(devdata, &dev_priv->vbt.display_devices, node) {
                child = &devdata->child;

                if (!(child->device_type & DEVICE_TYPE_MIPI_OUTPUT))
                        continue;

                dvo_port = child->dvo_port;

                if (dvo_port == DVO_PORT_MIPIA ||
                    (dvo_port == DVO_PORT_MIPIB && INTEL_GEN(dev_priv) >= 11) ||
                    (dvo_port == DVO_PORT_MIPIC && INTEL_GEN(dev_priv) < 11)) {
                        if (port)
                                *port = dvo_port - DVO_PORT_MIPIA;
                        return true;
                } else if (dvo_port == DVO_PORT_MIPIB ||
                           dvo_port == DVO_PORT_MIPIC ||
                           dvo_port == DVO_PORT_MIPID) {
                        drm_dbg_kms(&dev_priv->drm,
                                    "VBT has unsupported DSI port %c\n",
                                    port_name(dvo_port - DVO_PORT_MIPIA));
                }
        }

        return false;
}

static void fill_dsc(struct intel_crtc_state *crtc_state,
                     struct dsc_compression_parameters_entry *dsc,
                     int dsc_max_bpc)
{
        struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config;
        int bpc = 8;

        vdsc_cfg->dsc_version_major = dsc->version_major;
        vdsc_cfg->dsc_version_minor = dsc->version_minor;

        if (dsc->support_12bpc && dsc_max_bpc >= 12)
                bpc = 12;
        else if (dsc->support_10bpc && dsc_max_bpc >= 10)
                bpc = 10;
        else if (dsc->support_8bpc && dsc_max_bpc >= 8)
                bpc = 8;
        else
                DRM_DEBUG_KMS("VBT: Unsupported BPC %d for DCS\n",
                              dsc_max_bpc);

        crtc_state->pipe_bpp = bpc * 3;

        crtc_state->dsc.compressed_bpp = min(crtc_state->pipe_bpp,
                                             VBT_DSC_MAX_BPP(dsc->max_bpp));

        /*
         * FIXME: This is ugly, and slice count should take DSC engine
         * throughput etc. into account.
         *
         * Also, per spec DSI supports 1, 2, 3 or 4 horizontal slices.
         */
        if (dsc->slices_per_line & BIT(2)) {
                crtc_state->dsc.slice_count = 4;
        } else if (dsc->slices_per_line & BIT(1)) {
                crtc_state->dsc.slice_count = 2;
        } else {
                /* FIXME */
                if (!(dsc->slices_per_line & BIT(0)))
                        DRM_DEBUG_KMS("VBT: Unsupported DSC slice count for DSI\n");

                crtc_state->dsc.slice_count = 1;
        }

        if (crtc_state->hw.adjusted_mode.crtc_hdisplay %
            crtc_state->dsc.slice_count != 0)
                DRM_DEBUG_KMS("VBT: DSC hdisplay %d not divisible by slice count %d\n",
                              crtc_state->hw.adjusted_mode.crtc_hdisplay,
                              crtc_state->dsc.slice_count);

        /*
         * FIXME: Use VBT rc_buffer_block_size and rc_buffer_size for the
         * implementation specific physical rate buffer size. Currently we use
         * the required rate buffer model size calculated in
         * drm_dsc_compute_rc_parameters() according to VESA DSC Annex E.
         *
         * The VBT rc_buffer_block_size and rc_buffer_size definitions
         * correspond to DP 1.4 DPCD offsets 0x62 and 0x63. The DP DSC
         * implementation should also use the DPCD (or perhaps VBT for eDP)
         * provided value for the buffer size.
         */

        /* FIXME: DSI spec says bpc + 1 for this one */
        vdsc_cfg->line_buf_depth = VBT_DSC_LINE_BUFFER_DEPTH(dsc->line_buffer_depth);

        vdsc_cfg->block_pred_enable = dsc->block_prediction_enable;

        vdsc_cfg->slice_height = dsc->slice_height;
}

/* FIXME: initially DSI specific */
bool intel_bios_get_dsc_params(struct intel_encoder *encoder,
                               struct intel_crtc_state *crtc_state,
                               int dsc_max_bpc)
{
        struct drm_i915_private *i915 = to_i915(encoder->base.dev);
        const struct display_device_data *devdata;
        const struct child_device_config *child;

        list_for_each_entry(devdata, &i915->vbt.display_devices, node) {
                child = &devdata->child;

                if (!(child->device_type & DEVICE_TYPE_MIPI_OUTPUT))
                        continue;

                if (child->dvo_port - DVO_PORT_MIPIA == encoder->port) {
                        if (!devdata->dsc)
                                return false;

                        if (crtc_state)
                                fill_dsc(crtc_state, devdata->dsc, dsc_max_bpc);

                        return true;
                }
        }

        return false;
}

/**
 * intel_bios_is_port_hpd_inverted - is HPD inverted for %port
 * @i915:       i915 device instance
 * @port:       port to check
 *
 * Return true if HPD should be inverted for %port.
 */
bool
intel_bios_is_port_hpd_inverted(const struct drm_i915_private *i915,
                                enum port port)
{
        const struct child_device_config *child =
                i915->vbt.ddi_port_info[port].child;

        if (drm_WARN_ON_ONCE(&i915->drm, !IS_GEN9_LP(i915)))
                return false;

        return child && child->hpd_invert;
}

/**
 * intel_bios_is_lspcon_present - if LSPCON is attached on %port
 * @i915:       i915 device instance
 * @port:       port to check
 *
 * Return true if LSPCON is present on this port
 */
bool
intel_bios_is_lspcon_present(const struct drm_i915_private *i915,
                             enum port port)
{
        const struct child_device_config *child =
                i915->vbt.ddi_port_info[port].child;

        return HAS_LSPCON(i915) && child && child->lspcon;
}

enum aux_ch intel_bios_port_aux_ch(struct drm_i915_private *dev_priv,
                                   enum port port)
{
        const struct ddi_vbt_port_info *info =
                &dev_priv->vbt.ddi_port_info[port];
        enum aux_ch aux_ch;

        if (!info->alternate_aux_channel) {
                aux_ch = (enum aux_ch)port;

                drm_dbg_kms(&dev_priv->drm,
                            "using AUX %c for port %c (platform default)\n",
                            aux_ch_name(aux_ch), port_name(port));
                return aux_ch;
        }

        switch (info->alternate_aux_channel) {
        case DP_AUX_A:
                aux_ch = AUX_CH_A;
                break;
        case DP_AUX_B:
                aux_ch = AUX_CH_B;
                break;
        case DP_AUX_C:
                /*
                 * RKL/DG1 VBT uses PHY based mapping. Combo PHYs A,B,C,D
                 * map to DDI A,B,TC1,TC2 respectively.
                 */
                aux_ch = (IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv)) ?
                        AUX_CH_USBC1 : AUX_CH_C;
                break;
        case DP_AUX_D:
                aux_ch = (IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv)) ?
                        AUX_CH_USBC2 : AUX_CH_D;
                break;
        case DP_AUX_E:
                aux_ch = AUX_CH_E;
                break;
        case DP_AUX_F:
                aux_ch = AUX_CH_F;
                break;
        case DP_AUX_G:
                aux_ch = AUX_CH_G;
                break;
        case DP_AUX_H:
                aux_ch = AUX_CH_H;
                break;
        case DP_AUX_I:
                aux_ch = AUX_CH_I;
                break;
        default:
                MISSING_CASE(info->alternate_aux_channel);
                aux_ch = AUX_CH_A;
                break;
        }

        drm_dbg_kms(&dev_priv->drm, "using AUX %c for port %c (VBT)\n",
                    aux_ch_name(aux_ch), port_name(port));

        return aux_ch;
}

int intel_bios_max_tmds_clock(struct intel_encoder *encoder)
{
        struct drm_i915_private *i915 = to_i915(encoder->base.dev);

        return i915->vbt.ddi_port_info[encoder->port].max_tmds_clock;
}

int intel_bios_hdmi_level_shift(struct intel_encoder *encoder)
{
        struct drm_i915_private *i915 = to_i915(encoder->base.dev);
        const struct ddi_vbt_port_info *info =
                &i915->vbt.ddi_port_info[encoder->port];

        return info->hdmi_level_shift_set ? info->hdmi_level_shift : -1;
}

int intel_bios_dp_boost_level(struct intel_encoder *encoder)
{
        struct drm_i915_private *i915 = to_i915(encoder->base.dev);

        return i915->vbt.ddi_port_info[encoder->port].dp_boost_level;
}

int intel_bios_hdmi_boost_level(struct intel_encoder *encoder)
{
        struct drm_i915_private *i915 = to_i915(encoder->base.dev);

        return i915->vbt.ddi_port_info[encoder->port].hdmi_boost_level;
}

int intel_bios_dp_max_link_rate(struct intel_encoder *encoder)
{
        struct drm_i915_private *i915 = to_i915(encoder->base.dev);

        return i915->vbt.ddi_port_info[encoder->port].dp_max_link_rate;
}

int intel_bios_alternate_ddc_pin(struct intel_encoder *encoder)
{
        struct drm_i915_private *i915 = to_i915(encoder->base.dev);

        return i915->vbt.ddi_port_info[encoder->port].alternate_ddc_pin;
}

bool intel_bios_port_supports_dvi(struct drm_i915_private *i915, enum port port)
{
        return i915->vbt.ddi_port_info[port].supports_dvi;
}

bool intel_bios_port_supports_hdmi(struct drm_i915_private *i915, enum port port)
{
        return i915->vbt.ddi_port_info[port].supports_hdmi;
}

bool intel_bios_port_supports_dp(struct drm_i915_private *i915, enum port port)
{
        return i915->vbt.ddi_port_info[port].supports_dp;
}

bool intel_bios_port_supports_typec_usb(struct drm_i915_private *i915,
                                        enum port port)
{
        return i915->vbt.ddi_port_info[port].supports_typec_usb;
}

bool intel_bios_port_supports_tbt(struct drm_i915_private *i915, enum port port)
{
        return i915->vbt.ddi_port_info[port].supports_tbt;
}