// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Hardware monitoring driver for PMBus devices
 *
 * Copyright (c) 2010, 2011 Ericsson AB.
 * Copyright (c) 2012 Guenter Roeck
 */

#include <linux/debugfs.h>
#include <linux/kernel.h>
#include <linux/math64.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/pmbus.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include "pmbus.h"

/*
 * Number of additional attribute pointers to allocate
 * with each call to krealloc
 */
#define PMBUS_ATTR_ALLOC_SIZE   32
#define PMBUS_NAME_SIZE         24

struct pmbus_sensor {
        struct pmbus_sensor *next;
        char name[PMBUS_NAME_SIZE];     /* sysfs sensor name */
        struct device_attribute attribute;
        u8 page;                /* page number */
        u8 phase;               /* phase number, 0xff for all phases */
        u16 reg;                /* register */
        enum pmbus_sensor_classes class;        /* sensor class */
        bool update;            /* runtime sensor update needed */
        bool convert;           /* Whether or not to apply linear/vid/direct */
        int data;               /* Sensor data.
                                   Negative if there was a read error */
};
#define to_pmbus_sensor(_attr) \
        container_of(_attr, struct pmbus_sensor, attribute)

struct pmbus_boolean {
        char name[PMBUS_NAME_SIZE];     /* sysfs boolean name */
        struct sensor_device_attribute attribute;
        struct pmbus_sensor *s1;
        struct pmbus_sensor *s2;
};
#define to_pmbus_boolean(_attr) \
        container_of(_attr, struct pmbus_boolean, attribute)

struct pmbus_label {
        char name[PMBUS_NAME_SIZE];     /* sysfs label name */
        struct device_attribute attribute;
        char label[PMBUS_NAME_SIZE];    /* label */
};
#define to_pmbus_label(_attr) \
        container_of(_attr, struct pmbus_label, attribute)

/* Macros for converting between sensor index and register/page/status mask */

#define PB_STATUS_MASK  0xffff
#define PB_REG_SHIFT    16
#define PB_REG_MASK     0x3ff
#define PB_PAGE_SHIFT   26
#define PB_PAGE_MASK    0x3f

#define pb_reg_to_index(page, reg, mask)        (((page) << PB_PAGE_SHIFT) | \
                                                 ((reg) << PB_REG_SHIFT) | (mask))

#define pb_index_to_page(index)                 (((index) >> PB_PAGE_SHIFT) & PB_PAGE_MASK)
#define pb_index_to_reg(index)                  (((index) >> PB_REG_SHIFT) & PB_REG_MASK)
#define pb_index_to_mask(index)                 ((index) & PB_STATUS_MASK)

struct pmbus_data {
        struct device *dev;
        struct device *hwmon_dev;

        u32 flags;              /* from platform data */

        int exponent[PMBUS_PAGES];
                                /* linear mode: exponent for output voltages */

        const struct pmbus_driver_info *info;

        int max_attributes;
        int num_attributes;
        struct attribute_group group;
        const struct attribute_group **groups;
        struct dentry *debugfs;         /* debugfs device directory */

        struct pmbus_sensor *sensors;

        struct mutex update_lock;

        bool has_status_word;           /* device uses STATUS_WORD register */
        int (*read_status)(struct i2c_client *client, int page);

        s16 currpage;   /* current page, -1 for unknown/unset */
        s16 currphase;  /* current phase, 0xff for all, -1 for unknown/unset */
};

struct pmbus_debugfs_entry {
        struct i2c_client *client;
        u8 page;
        u8 reg;
};

static const int pmbus_fan_rpm_mask[] = {
        PB_FAN_1_RPM,
        PB_FAN_2_RPM,
        PB_FAN_1_RPM,
        PB_FAN_2_RPM,
};

static const int pmbus_fan_config_registers[] = {
        PMBUS_FAN_CONFIG_12,
        PMBUS_FAN_CONFIG_12,
        PMBUS_FAN_CONFIG_34,
        PMBUS_FAN_CONFIG_34
};

static const int pmbus_fan_command_registers[] = {
        PMBUS_FAN_COMMAND_1,
        PMBUS_FAN_COMMAND_2,
        PMBUS_FAN_COMMAND_3,
        PMBUS_FAN_COMMAND_4,
};

void pmbus_clear_cache(struct i2c_client *client)
{
        struct pmbus_data *data = i2c_get_clientdata(client);
        struct pmbus_sensor *sensor;

        for (sensor = data->sensors; sensor; sensor = sensor->next)
                sensor->data = -ENODATA;
}
EXPORT_SYMBOL_GPL(pmbus_clear_cache);

int pmbus_set_page(struct i2c_client *client, int page, int phase)
{
        struct pmbus_data *data = i2c_get_clientdata(client);
        int rv;

        if (page < 0)
                return 0;

        if (!(data->info->func[page] & PMBUS_PAGE_VIRTUAL) &&
            data->info->pages > 1 && page != data->currpage) {
                rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
                if (rv < 0)
                        return rv;

                rv = i2c_smbus_read_byte_data(client, PMBUS_PAGE);
                if (rv < 0)
                        return rv;

                if (rv != page)
                        return -EIO;
        }
        data->currpage = page;

        if (data->info->phases[page] && data->currphase != phase &&
            !(data->info->func[page] & PMBUS_PHASE_VIRTUAL)) {
                rv = i2c_smbus_write_byte_data(client, PMBUS_PHASE,
                                               phase);
                if (rv)
                        return rv;
        }
        data->currphase = phase;

        return 0;
}
EXPORT_SYMBOL_GPL(pmbus_set_page);

int pmbus_write_byte(struct i2c_client *client, int page, u8 value)
{
        int rv;

        rv = pmbus_set_page(client, page, 0xff);
        if (rv < 0)
                return rv;

        return i2c_smbus_write_byte(client, value);
}
EXPORT_SYMBOL_GPL(pmbus_write_byte);

/*
 * _pmbus_write_byte() is similar to pmbus_write_byte(), but checks if
 * a device specific mapping function exists and calls it if necessary.
 */
static int _pmbus_write_byte(struct i2c_client *client, int page, u8 value)
{
        struct pmbus_data *data = i2c_get_clientdata(client);
        const struct pmbus_driver_info *info = data->info;
        int status;

        if (info->write_byte) {
                status = info->write_byte(client, page, value);
                if (status != -ENODATA)
                        return status;
        }
        return pmbus_write_byte(client, page, value);
}

int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg,
                          u16 word)
{
        int rv;

        rv = pmbus_set_page(client, page, 0xff);
        if (rv < 0)
                return rv;

        return i2c_smbus_write_word_data(client, reg, word);
}
EXPORT_SYMBOL_GPL(pmbus_write_word_data);


static int pmbus_write_virt_reg(struct i2c_client *client, int page, int reg,
                                u16 word)
{
        int bit;
        int id;
        int rv;

        switch (reg) {
        case PMBUS_VIRT_FAN_TARGET_1 ... PMBUS_VIRT_FAN_TARGET_4:
                id = reg - PMBUS_VIRT_FAN_TARGET_1;
                bit = pmbus_fan_rpm_mask[id];
                rv = pmbus_update_fan(client, page, id, bit, bit, word);
                break;
        default:
                rv = -ENXIO;
                break;
        }

        return rv;
}

/*
 * _pmbus_write_word_data() is similar to pmbus_write_word_data(), but checks if
 * a device specific mapping function exists and calls it if necessary.
 */
static int _pmbus_write_word_data(struct i2c_client *client, int page, int reg,
                                  u16 word)
{
        struct pmbus_data *data = i2c_get_clientdata(client);
        const struct pmbus_driver_info *info = data->info;
        int status;

        if (info->write_word_data) {
                status = info->write_word_data(client, page, reg, word);
                if (status != -ENODATA)
                        return status;
        }

        if (reg >= PMBUS_VIRT_BASE)
                return pmbus_write_virt_reg(client, page, reg, word);

        return pmbus_write_word_data(client, page, reg, word);
}

int pmbus_update_fan(struct i2c_client *client, int page, int id,
                     u8 config, u8 mask, u16 command)
{
        int from;
        int rv;
        u8 to;

        from = pmbus_read_byte_data(client, page,
                                    pmbus_fan_config_registers[id]);
        if (from < 0)
                return from;

        to = (from & ~mask) | (config & mask);
        if (to != from) {
                rv = pmbus_write_byte_data(client, page,
                                           pmbus_fan_config_registers[id], to);
                if (rv < 0)
                        return rv;
        }

        return _pmbus_write_word_data(client, page,
                                      pmbus_fan_command_registers[id], command);
}
EXPORT_SYMBOL_GPL(pmbus_update_fan);

int pmbus_read_word_data(struct i2c_client *client, int page, int phase, u8 reg)
{
        int rv;

        rv = pmbus_set_page(client, page, phase);
        if (rv < 0)
                return rv;

        return i2c_smbus_read_word_data(client, reg);
}
EXPORT_SYMBOL_GPL(pmbus_read_word_data);

static int pmbus_read_virt_reg(struct i2c_client *client, int page, int reg)
{
        int rv;
        int id;

        switch (reg) {
        case PMBUS_VIRT_FAN_TARGET_1 ... PMBUS_VIRT_FAN_TARGET_4:
                id = reg - PMBUS_VIRT_FAN_TARGET_1;
                rv = pmbus_get_fan_rate_device(client, page, id, rpm);
                break;
        default:
                rv = -ENXIO;
                break;
        }

        return rv;
}

/*
 * _pmbus_read_word_data() is similar to pmbus_read_word_data(), but checks if
 * a device specific mapping function exists and calls it if necessary.
 */
static int _pmbus_read_word_data(struct i2c_client *client, int page,
                                 int phase, int reg)
{
        struct pmbus_data *data = i2c_get_clientdata(client);
        const struct pmbus_driver_info *info = data->info;
        int status;

        if (info->read_word_data) {
                status = info->read_word_data(client, page, phase, reg);
                if (status != -ENODATA)
                        return status;
        }

        if (reg >= PMBUS_VIRT_BASE)
                return pmbus_read_virt_reg(client, page, reg);

        return pmbus_read_word_data(client, page, phase, reg);
}

/* Same as above, but without phase parameter, for use in check functions */
static int __pmbus_read_word_data(struct i2c_client *client, int page, int reg)
{
        return _pmbus_read_word_data(client, page, 0xff, reg);
}

int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg)
{
        int rv;

        rv = pmbus_set_page(client, page, 0xff);
        if (rv < 0)
                return rv;

        return i2c_smbus_read_byte_data(client, reg);
}
EXPORT_SYMBOL_GPL(pmbus_read_byte_data);

int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg, u8 value)
{
        int rv;

        rv = pmbus_set_page(client, page, 0xff);
        if (rv < 0)
                return rv;

        return i2c_smbus_write_byte_data(client, reg, value);
}
EXPORT_SYMBOL_GPL(pmbus_write_byte_data);

int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg,
                           u8 mask, u8 value)
{
        unsigned int tmp;
        int rv;

        rv = pmbus_read_byte_data(client, page, reg);
        if (rv < 0)
                return rv;

        tmp = (rv & ~mask) | (value & mask);

        if (tmp != rv)
                rv = pmbus_write_byte_data(client, page, reg, tmp);

        return rv;
}
EXPORT_SYMBOL_GPL(pmbus_update_byte_data);

/*
 * _pmbus_read_byte_data() is similar to pmbus_read_byte_data(), but checks if
 * a device specific mapping function exists and calls it if necessary.
 */
static int _pmbus_read_byte_data(struct i2c_client *client, int page, int reg)
{
        struct pmbus_data *data = i2c_get_clientdata(client);
        const struct pmbus_driver_info *info = data->info;
        int status;

        if (info->read_byte_data) {
                status = info->read_byte_data(client, page, reg);
                if (status != -ENODATA)
                        return status;
        }
        return pmbus_read_byte_data(client, page, reg);
}

static struct pmbus_sensor *pmbus_find_sensor(struct pmbus_data *data, int page,
                                              int reg)
{
        struct pmbus_sensor *sensor;

        for (sensor = data->sensors; sensor; sensor = sensor->next) {
                if (sensor->page == page && sensor->reg == reg)
                        return sensor;
        }

        return ERR_PTR(-EINVAL);
}

static int pmbus_get_fan_rate(struct i2c_client *client, int page, int id,
                              enum pmbus_fan_mode mode,
                              bool from_cache)
{
        struct pmbus_data *data = i2c_get_clientdata(client);
        bool want_rpm, have_rpm;
        struct pmbus_sensor *s;
        int config;
        int reg;

        want_rpm = (mode == rpm);

        if (from_cache) {
                reg = want_rpm ? PMBUS_VIRT_FAN_TARGET_1 : PMBUS_VIRT_PWM_1;
                s = pmbus_find_sensor(data, page, reg + id);
                if (IS_ERR(s))
                        return PTR_ERR(s);

                return s->data;
        }

        config = pmbus_read_byte_data(client, page,
                                      pmbus_fan_config_registers[id]);
        if (config < 0)
                return config;

        have_rpm = !!(config & pmbus_fan_rpm_mask[id]);
        if (want_rpm == have_rpm)
                return pmbus_read_word_data(client, page, 0xff,
                                            pmbus_fan_command_registers[id]);

        /* Can't sensibly map between RPM and PWM, just return zero */
        return 0;
}

int pmbus_get_fan_rate_device(struct i2c_client *client, int page, int id,
                              enum pmbus_fan_mode mode)
{
        return pmbus_get_fan_rate(client, page, id, mode, false);
}
EXPORT_SYMBOL_GPL(pmbus_get_fan_rate_device);

int pmbus_get_fan_rate_cached(struct i2c_client *client, int page, int id,
                              enum pmbus_fan_mode mode)
{
        return pmbus_get_fan_rate(client, page, id, mode, true);
}
EXPORT_SYMBOL_GPL(pmbus_get_fan_rate_cached);

static void pmbus_clear_fault_page(struct i2c_client *client, int page)
{
        _pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
}

void pmbus_clear_faults(struct i2c_client *client)
{
        struct pmbus_data *data = i2c_get_clientdata(client);
        int i;

        for (i = 0; i < data->info->pages; i++)
                pmbus_clear_fault_page(client, i);
}
EXPORT_SYMBOL_GPL(pmbus_clear_faults);

static int pmbus_check_status_cml(struct i2c_client *client)
{
        struct pmbus_data *data = i2c_get_clientdata(client);
        int status, status2;

        status = data->read_status(client, -1);
        if (status < 0 || (status & PB_STATUS_CML)) {
                status2 = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML);
                if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND))
                        return -EIO;
        }
        return 0;
}

static bool pmbus_check_register(struct i2c_client *client,
                                 int (*func)(struct i2c_client *client,
                                             int page, int reg),
                                 int page, int reg)
{
        int rv;
        struct pmbus_data *data = i2c_get_clientdata(client);

        rv = func(client, page, reg);
        if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK))
                rv = pmbus_check_status_cml(client);
        pmbus_clear_fault_page(client, -1);
        return rv >= 0;
}

static bool pmbus_check_status_register(struct i2c_client *client, int page)
{
        int status;
        struct pmbus_data *data = i2c_get_clientdata(client);

        status = data->read_status(client, page);
        if (status >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK) &&
            (status & PB_STATUS_CML)) {
                status = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML);
                if (status < 0 || (status & PB_CML_FAULT_INVALID_COMMAND))
                        status = -EIO;
        }

        pmbus_clear_fault_page(client, -1);
        return status >= 0;
}

bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg)
{
        return pmbus_check_register(client, _pmbus_read_byte_data, page, reg);
}
EXPORT_SYMBOL_GPL(pmbus_check_byte_register);

bool pmbus_check_word_register(struct i2c_client *client, int page, int reg)
{
        return pmbus_check_register(client, __pmbus_read_word_data, page, reg);
}
EXPORT_SYMBOL_GPL(pmbus_check_word_register);

const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client *client)
{
        struct pmbus_data *data = i2c_get_clientdata(client);

        return data->info;
}
EXPORT_SYMBOL_GPL(pmbus_get_driver_info);

static int pmbus_get_status(struct i2c_client *client, int page, int reg)
{
        struct pmbus_data *data = i2c_get_clientdata(client);
        int status;

        switch (reg) {
        case PMBUS_STATUS_WORD:
                status = data->read_status(client, page);
                break;
        default:
                status = _pmbus_read_byte_data(client, page, reg);
                break;
        }
        if (status < 0)
                pmbus_clear_faults(client);
        return status;
}

static void pmbus_update_sensor_data(struct i2c_client *client, struct pmbus_sensor *sensor)
{
        if (sensor->data < 0 || sensor->update)
                sensor->data = _pmbus_read_word_data(client, sensor->page,
                                                     sensor->phase, sensor->reg);
}

/*
 * Convert linear sensor values to milli- or micro-units
 * depending on sensor type.
 */
static s64 pmbus_reg2data_linear(struct pmbus_data *data,
                                 struct pmbus_sensor *sensor)
{
        s16 exponent;
        s32 mantissa;
        s64 val;

        if (sensor->class == PSC_VOLTAGE_OUT) { /* LINEAR16 */
                exponent = data->exponent[sensor->page];
                mantissa = (u16) sensor->data;
        } else {                                /* LINEAR11 */
                exponent = ((s16)sensor->data) >> 11;
                mantissa = ((s16)((sensor->data & 0x7ff) << 5)) >> 5;
        }

        val = mantissa;

        /* scale result to milli-units for all sensors except fans */
        if (sensor->class != PSC_FAN)
                val = val * 1000LL;

        /* scale result to micro-units for power sensors */
        if (sensor->class == PSC_POWER)
                val = val * 1000LL;

        if (exponent >= 0)
                val <<= exponent;
        else
                val >>= -exponent;

        return val;
}

/*
 * Convert direct sensor values to milli- or micro-units
 * depending on sensor type.
 */
static s64 pmbus_reg2data_direct(struct pmbus_data *data,
                                 struct pmbus_sensor *sensor)
{
        s64 b, val = (s16)sensor->data;
        s32 m, R;

        m = data->info->m[sensor->class];
        b = data->info->b[sensor->class];
        R = data->info->R[sensor->class];

        if (m == 0)
                return 0;

        /* X = 1/m * (Y * 10^-R - b) */
        R = -R;
        /* scale result to milli-units for everything but fans */
        if (!(sensor->class == PSC_FAN || sensor->class == PSC_PWM)) {
                R += 3;
                b *= 1000;
        }

        /* scale result to micro-units for power sensors */
        if (sensor->class == PSC_POWER) {
                R += 3;
                b *= 1000;
        }

        while (R > 0) {
                val *= 10;
                R--;
        }
        while (R < 0) {
                val = div_s64(val + 5LL, 10L);  /* round closest */
                R++;
        }

        val = div_s64(val - b, m);
        return val;
}

/*
 * Convert VID sensor values to milli- or micro-units
 * depending on sensor type.
 */
static s64 pmbus_reg2data_vid(struct pmbus_data *data,
                              struct pmbus_sensor *sensor)
{
        long val = sensor->data;
        long rv = 0;

        switch (data->info->vrm_version[sensor->page]) {
        case vr11:
                if (val >= 0x02 && val <= 0xb2)
                        rv = DIV_ROUND_CLOSEST(160000 - (val - 2) * 625, 100);
                break;
        case vr12:
                if (val >= 0x01)
                        rv = 250 + (val - 1) * 5;
                break;
        case vr13:
                if (val >= 0x01)
                        rv = 500 + (val - 1) * 10;
                break;
        case imvp9:
                if (val >= 0x01)
                        rv = 200 + (val - 1) * 10;
                break;
        case amd625mv:
                if (val >= 0x0 && val <= 0xd8)
                        rv = DIV_ROUND_CLOSEST(155000 - val * 625, 100);
                break;
        }
        return rv;
}

static s64 pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor)
{
        s64 val;

        if (!sensor->convert)
                return sensor->data;

        switch (data->info->format[sensor->class]) {
        case direct:
                val = pmbus_reg2data_direct(data, sensor);
                break;
        case vid:
                val = pmbus_reg2data_vid(data, sensor);
                break;
        case linear:
        default:
                val = pmbus_reg2data_linear(data, sensor);
                break;
        }
        return val;
}

#define MAX_MANTISSA    (1023 * 1000)
#define MIN_MANTISSA    (511 * 1000)

static u16 pmbus_data2reg_linear(struct pmbus_data *data,
                                 struct pmbus_sensor *sensor, s64 val)
{
        s16 exponent = 0, mantissa;
        bool negative = false;

        /* simple case */
        if (val == 0)
                return 0;

        if (sensor->class == PSC_VOLTAGE_OUT) {
                /* LINEAR16 does not support negative voltages */
                if (val < 0)
                        return 0;

                /*
                 * For a static exponents, we don't have a choice
                 * but to adjust the value to it.
                 */
                if (data->exponent[sensor->page] < 0)
                        val <<= -data->exponent[sensor->page];
                else
                        val >>= data->exponent[sensor->page];
                val = DIV_ROUND_CLOSEST_ULL(val, 1000);
                return clamp_val(val, 0, 0xffff);
        }

        if (val < 0) {
                negative = true;
                val = -val;
        }

        /* Power is in uW. Convert to mW before converting. */
        if (sensor->class == PSC_POWER)
                val = DIV_ROUND_CLOSEST_ULL(val, 1000);

        /*
         * For simplicity, convert fan data to milli-units
         * before calculating the exponent.
         */
        if (sensor->class == PSC_FAN)
                val = val * 1000LL;

        /* Reduce large mantissa until it fits into 10 bit */
        while (val >= MAX_MANTISSA && exponent < 15) {
                exponent++;
                val >>= 1;
        }
        /* Increase small mantissa to improve precision */
        while (val < MIN_MANTISSA && exponent > -15) {
                exponent--;
                val <<= 1;
        }

        /* Convert mantissa from milli-units to units */
        mantissa = clamp_val(DIV_ROUND_CLOSEST_ULL(val, 1000), 0, 0x3ff);

        /* restore sign */
        if (negative)
                mantissa = -mantissa;

        /* Convert to 5 bit exponent, 11 bit mantissa */
        return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800);
}

static u16 pmbus_data2reg_direct(struct pmbus_data *data,
                                 struct pmbus_sensor *sensor, s64 val)
{
        s64 b;
        s32 m, R;

        m = data->info->m[sensor->class];
        b = data->info->b[sensor->class];
        R = data->info->R[sensor->class];

        /* Power is in uW. Adjust R and b. */
        if (sensor->class == PSC_POWER) {
                R -= 3;
                b *= 1000;
        }

        /* Calculate Y = (m * X + b) * 10^R */
        if (!(sensor->class == PSC_FAN || sensor->class == PSC_PWM)) {
                R -= 3;         /* Adjust R and b for data in milli-units */
                b *= 1000;
        }
        val = val * m + b;

        while (R > 0) {
                val *= 10;
                R--;
        }
        while (R < 0) {
                val = div_s64(val + 5LL, 10L);  /* round closest */
                R++;
        }

        return (u16)clamp_val(val, S16_MIN, S16_MAX);
}

static u16 pmbus_data2reg_vid(struct pmbus_data *data,
                              struct pmbus_sensor *sensor, s64 val)
{
        val = clamp_val(val, 500, 1600);

        return 2 + DIV_ROUND_CLOSEST_ULL((1600LL - val) * 100LL, 625);
}

static u16 pmbus_data2reg(struct pmbus_data *data,
                          struct pmbus_sensor *sensor, s64 val)
{
        u16 regval;

        if (!sensor->convert)
                return val;

        switch (data->info->format[sensor->class]) {
        case direct:
                regval = pmbus_data2reg_direct(data, sensor, val);
                break;
        case vid:
                regval = pmbus_data2reg_vid(data, sensor, val);
                break;
        case linear:
        default:
                regval = pmbus_data2reg_linear(data, sensor, val);
                break;
        }
        return regval;
}

/*
 * Return boolean calculated from converted data.
 * <index> defines a status register index and mask.
 * The mask is in the lower 8 bits, the register index is in bits 8..23.
 *
 * The associated pmbus_boolean structure contains optional pointers to two
 * sensor attributes. If specified, those attributes are compared against each
 * other to determine if a limit has been exceeded.
 *
 * If the sensor attribute pointers are NULL, the function returns true if
 * (status[reg] & mask) is true.
 *
 * If sensor attribute pointers are provided, a comparison against a specified
 * limit has to be performed to determine the boolean result.
 * In this case, the function returns true if v1 >= v2 (where v1 and v2 are
 * sensor values referenced by sensor attribute pointers s1 and s2).
 *
 * To determine if an object exceeds upper limits, specify <s1,s2> = <v,limit>.
 * To determine if an object exceeds lower limits, specify <s1,s2> = <limit,v>.
 *
 * If a negative value is stored in any of the referenced registers, this value
 * reflects an error code which will be returned.
 */
static int pmbus_get_boolean(struct i2c_client *client, struct pmbus_boolean *b,
                             int index)
{
        struct pmbus_data *data = i2c_get_clientdata(client);
        struct pmbus_sensor *s1 = b->s1;
        struct pmbus_sensor *s2 = b->s2;
        u16 mask = pb_index_to_mask(index);
        u8 page = pb_index_to_page(index);
        u16 reg = pb_index_to_reg(index);
        int ret, status;
        u16 regval;

        mutex_lock(&data->update_lock);
        status = pmbus_get_status(client, page, reg);
        if (status < 0) {
                ret = status;
                goto unlock;
        }

        if (s1)
                pmbus_update_sensor_data(client, s1);
        if (s2)
                pmbus_update_sensor_data(client, s2);

        regval = status & mask;
        if (s1 && s2) {
                s64 v1, v2;

                if (s1->data < 0) {
                        ret = s1->data;
                        goto unlock;
                }
                if (s2->data < 0) {
                        ret = s2->data;
                        goto unlock;
                }

                v1 = pmbus_reg2data(data, s1);
                v2 = pmbus_reg2data(data, s2);
                ret = !!(regval && v1 >= v2);
        } else {
                ret = !!regval;
        }
unlock:
        mutex_unlock(&data->update_lock);
        return ret;
}

static ssize_t pmbus_show_boolean(struct device *dev,
                                  struct device_attribute *da, char *buf)
{
        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
        struct pmbus_boolean *boolean = to_pmbus_boolean(attr);
        struct i2c_client *client = to_i2c_client(dev->parent);
        int val;

        val = pmbus_get_boolean(client, boolean, attr->index);
        if (val < 0)
                return val;
        return snprintf(buf, PAGE_SIZE, "%d\n", val);
}

static ssize_t pmbus_show_sensor(struct device *dev,
                                 struct device_attribute *devattr, char *buf)
{
        struct i2c_client *client = to_i2c_client(dev->parent);
        struct pmbus_sensor *sensor = to_pmbus_sensor(devattr);
        struct pmbus_data *data = i2c_get_clientdata(client);
        ssize_t ret;

        mutex_lock(&data->update_lock);
        pmbus_update_sensor_data(client, sensor);
        if (sensor->data < 0)
                ret = sensor->data;
        else
                ret = snprintf(buf, PAGE_SIZE, "%lld\n", pmbus_reg2data(data, sensor));
        mutex_unlock(&data->update_lock);
        return ret;
}

static ssize_t pmbus_set_sensor(struct device *dev,
                                struct device_attribute *devattr,
                                const char *buf, size_t count)
{
        struct i2c_client *client = to_i2c_client(dev->parent);
        struct pmbus_data *data = i2c_get_clientdata(client);
        struct pmbus_sensor *sensor = to_pmbus_sensor(devattr);
        ssize_t rv = count;
        s64 val;
        int ret;
        u16 regval;

        if (kstrtos64(buf, 10, &val) < 0)
                return -EINVAL;

        mutex_lock(&data->update_lock);
        regval = pmbus_data2reg(data, sensor, val);
        ret = _pmbus_write_word_data(client, sensor->page, sensor->reg, regval);
        if (ret < 0)
                rv = ret;
        else
                sensor->data = regval;
        mutex_unlock(&data->update_lock);
        return rv;
}

static ssize_t pmbus_show_label(struct device *dev,
                                struct device_attribute *da, char *buf)
{
        struct pmbus_label *label = to_pmbus_label(da);

        return snprintf(buf, PAGE_SIZE, "%s\n", label->label);
}

static int pmbus_add_attribute(struct pmbus_data *data, struct attribute *attr)
{
        if (data->num_attributes >= data->max_attributes - 1) {
                int new_max_attrs = data->max_attributes + PMBUS_ATTR_ALLOC_SIZE;
                void *new_attrs = devm_krealloc(data->dev, data->group.attrs,
                                                new_max_attrs * sizeof(void *),
                                                GFP_KERNEL);
                if (!new_attrs)
                        return -ENOMEM;
                data->group.attrs = new_attrs;
                data->max_attributes = new_max_attrs;

        }

        data->group.attrs[data->num_attributes++] = attr;
        data->group.attrs[data->num_attributes] = NULL;
        return 0;
}

static void pmbus_dev_attr_init(struct device_attribute *dev_attr,
                                const char *name,
                                umode_t mode,
                                ssize_t (*show)(struct device *dev,
                                                struct device_attribute *attr,
                                                char *buf),
                                ssize_t (*store)(struct device *dev,
                                                 struct device_attribute *attr,
                                                 const char *buf, size_t count))
{
        sysfs_attr_init(&dev_attr->attr);
        dev_attr->attr.name = name;
        dev_attr->attr.mode = mode;
        dev_attr->show = show;
        dev_attr->store = store;
}

static void pmbus_attr_init(struct sensor_device_attribute *a,
                            const char *name,
                            umode_t mode,
                            ssize_t (*show)(struct device *dev,
                                            struct device_attribute *attr,
                                            char *buf),
                            ssize_t (*store)(struct device *dev,
                                             struct device_attribute *attr,
                                             const char *buf, size_t count),
                            int idx)
{
        pmbus_dev_attr_init(&a->dev_attr, name, mode, show, store);
        a->index = idx;
}

static int pmbus_add_boolean(struct pmbus_data *data,
                             const char *name, const char *type, int seq,
                             struct pmbus_sensor *s1,
                             struct pmbus_sensor *s2,
                             u8 page, u16 reg, u16 mask)
{
        struct pmbus_boolean *boolean;
        struct sensor_device_attribute *a;

        if (WARN((s1 && !s2) || (!s1 && s2), "Bad s1/s2 parameters\n"))
                return -EINVAL;

        boolean = devm_kzalloc(data->dev, sizeof(*boolean), GFP_KERNEL);
        if (!boolean)
                return -ENOMEM;

        a = &boolean->attribute;

        snprintf(boolean->name, sizeof(boolean->name), "%s%d_%s",
                 name, seq, type);
        boolean->s1 = s1;
        boolean->s2 = s2;
        pmbus_attr_init(a, boolean->name, 0444, pmbus_show_boolean, NULL,
                        pb_reg_to_index(page, reg, mask));

        return pmbus_add_attribute(data, &a->dev_attr.attr);
}

static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data,
                                             const char *name, const char *type,
                                             int seq, int page, int phase,
                                             int reg,
                                             enum pmbus_sensor_classes class,
                                             bool update, bool readonly,
                                             bool convert)
{
        struct pmbus_sensor *sensor;
        struct device_attribute *a;

        sensor = devm_kzalloc(data->dev, sizeof(*sensor), GFP_KERNEL);
        if (!sensor)
                return NULL;
        a = &sensor->attribute;

        if (type)
                snprintf(sensor->name, sizeof(sensor->name), "%s%d_%s",
                         name, seq, type);
        else
                snprintf(sensor->name, sizeof(sensor->name), "%s%d",
                         name, seq);

        if (data->flags & PMBUS_WRITE_PROTECTED)
                readonly = true;

        sensor->page = page;
        sensor->phase = phase;
        sensor->reg = reg;
        sensor->class = class;
        sensor->update = update;
        sensor->convert = convert;
        sensor->data = -ENODATA;
        pmbus_dev_attr_init(a, sensor->name,
                            readonly ? 0444 : 0644,
                            pmbus_show_sensor, pmbus_set_sensor);

        if (pmbus_add_attribute(data, &a->attr))
                return NULL;

        sensor->next = data->sensors;
        data->sensors = sensor;

        return sensor;
}

static int pmbus_add_label(struct pmbus_data *data,
                           const char *name, int seq,
                           const char *lstring, int index, int phase)
{
        struct pmbus_label *label;
        struct device_attribute *a;

        label = devm_kzalloc(data->dev, sizeof(*label), GFP_KERNEL);
        if (!label)
                return -ENOMEM;

        a = &label->attribute;

        snprintf(label->name, sizeof(label->name), "%s%d_label", name, seq);
        if (!index) {
                if (phase == 0xff)
                        strncpy(label->label, lstring,
                                sizeof(label->label) - 1);
                else
                        snprintf(label->label, sizeof(label->label), "%s.%d",
                                 lstring, phase);
        } else {
                if (phase == 0xff)
                        snprintf(label->label, sizeof(label->label), "%s%d",
                                 lstring, index);
                else
                        snprintf(label->label, sizeof(label->label), "%s%d.%d",
                                 lstring, index, phase);
        }

        pmbus_dev_attr_init(a, label->name, 0444, pmbus_show_label, NULL);
        return pmbus_add_attribute(data, &a->attr);
}

/*
 * Search for attributes. Allocate sensors, booleans, and labels as needed.
 */

/*
 * The pmbus_limit_attr structure describes a single limit attribute
 * and its associated alarm attribute.
 */
struct pmbus_limit_attr {
        u16 reg;                /* Limit register */
        u16 sbit;               /* Alarm attribute status bit */
        bool update;            /* True if register needs updates */
        bool low;               /* True if low limit; for limits with compare
                                   functions only */
        const char *attr;       /* Attribute name */
        const char *alarm;      /* Alarm attribute name */
};

/*
 * The pmbus_sensor_attr structure describes one sensor attribute. This
 * description includes a reference to the associated limit attributes.
 */
struct pmbus_sensor_attr {
        u16 reg;                        /* sensor register */
        u16 gbit;                       /* generic status bit */
        u8 nlimit;                      /* # of limit registers */
        enum pmbus_sensor_classes class;/* sensor class */
        const char *label;              /* sensor label */
        bool paged;                     /* true if paged sensor */
        bool update;                    /* true if update needed */
        bool compare;                   /* true if compare function needed */
        u32 func;                       /* sensor mask */
        u32 sfunc;                      /* sensor status mask */
        int sreg;                       /* status register */
        const struct pmbus_limit_attr *limit;/* limit registers */
};

/*
 * Add a set of limit attributes and, if supported, the associated
 * alarm attributes.
 * returns 0 if no alarm register found, 1 if an alarm register was found,
 * < 0 on errors.
 */
static int pmbus_add_limit_attrs(struct i2c_client *client,
                                 struct pmbus_data *data,
                                 const struct pmbus_driver_info *info,
                                 const char *name, int index, int page,
                                 struct pmbus_sensor *base,
                                 const struct pmbus_sensor_attr *attr)
{
        const struct pmbus_limit_attr *l = attr->limit;
        int nlimit = attr->nlimit;
        int have_alarm = 0;
        int i, ret;
        struct pmbus_sensor *curr;

        for (i = 0; i < nlimit; i++) {
                if (pmbus_check_word_register(client, page, l->reg)) {
                        curr = pmbus_add_sensor(data, name, l->attr, index,
                                                page, 0xff, l->reg, attr->class,
                                                attr->update || l->update,
                                                false, true);
                        if (!curr)
                                return -ENOMEM;
                        if (l->sbit && (info->func[page] & attr->sfunc)) {
                                ret = pmbus_add_boolean(data, name,
                                        l->alarm, index,
                                        attr->compare ?  l->low ? curr : base
                                                      : NULL,
                                        attr->compare ? l->low ? base : curr
                                                      : NULL,
                                        page, attr->sreg, l->sbit);
                                if (ret)
                                        return ret;
                                have_alarm = 1;
                        }
                }
                l++;
        }
        return have_alarm;
}

static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
                                      struct pmbus_data *data,
                                      const struct pmbus_driver_info *info,
                                      const char *name,
                                      int index, int page, int phase,
                                      const struct pmbus_sensor_attr *attr,
                                      bool paged)
{
        struct pmbus_sensor *base;
        bool upper = !!(attr->gbit & 0xff00);   /* need to check STATUS_WORD */
        int ret;

        if (attr->label) {
                ret = pmbus_add_label(data, name, index, attr->label,
                                      paged ? page + 1 : 0, phase);
                if (ret)
                        return ret;
        }
        base = pmbus_add_sensor(data, name, "input", index, page, phase,
                                attr->reg, attr->class, true, true, true);
        if (!base)
                return -ENOMEM;
        /* No limit and alarm attributes for phase specific sensors */
        if (attr->sfunc && phase == 0xff) {
                ret = pmbus_add_limit_attrs(client, data, info, name,
                                            index, page, base, attr);
                if (ret < 0)
                        return ret;
                /*
                 * Add generic alarm attribute only if there are no individual
                 * alarm attributes, if there is a global alarm bit, and if
                 * the generic status register (word or byte, depending on
                 * which global bit is set) for this page is accessible.
                 */
                if (!ret && attr->gbit &&
                    (!upper || (upper && data->has_status_word)) &&
                    pmbus_check_status_register(client, page)) {
                        ret = pmbus_add_boolean(data, name, "alarm", index,
                                                NULL, NULL,
                                                page, PMBUS_STATUS_WORD,
                                                attr->gbit);
                        if (ret)
                                return ret;
                }
        }
        return 0;
}

static bool pmbus_sensor_is_paged(const struct pmbus_driver_info *info,
                                  const struct pmbus_sensor_attr *attr)
{
        int p;

        if (attr->paged)
                return true;

        /*
         * Some attributes may be present on more than one page despite
         * not being marked with the paged attribute. If that is the case,
         * then treat the sensor as being paged and add the page suffix to the
         * attribute name.
         * We don't just add the paged attribute to all such attributes, in
         * order to maintain the un-suffixed labels in the case where the
         * attribute is only on page 0.
         */
        for (p = 1; p < info->pages; p++) {
                if (info->func[p] & attr->func)
                        return true;
        }
        return false;
}

static int pmbus_add_sensor_attrs(struct i2c_client *client,
                                  struct pmbus_data *data,
                                  const char *name,
                                  const struct pmbus_sensor_attr *attrs,
                                  int nattrs)
{
        const struct pmbus_driver_info *info = data->info;
        int index, i;
        int ret;

        index = 1;
        for (i = 0; i < nattrs; i++) {
                int page, pages;
                bool paged = pmbus_sensor_is_paged(info, attrs);

                pages = paged ? info->pages : 1;
                for (page = 0; page < pages; page++) {
                        if (!(info->func[page] & attrs->func))
                                continue;
                        ret = pmbus_add_sensor_attrs_one(client, data, info,
                                                         name, index, page,
                                                         0xff, attrs, paged);
                        if (ret)
                                return ret;
                        index++;
                        if (info->phases[page]) {
                                int phase;

                                for (phase = 0; phase < info->phases[page];
                                     phase++) {
                                        if (!(info->pfunc[phase] & attrs->func))
                                                continue;
                                        ret = pmbus_add_sensor_attrs_one(client,
                                                data, info, name, index, page,
                                                phase, attrs, paged);
                                        if (ret)
                                                return ret;
                                        index++;
                                }
                        }
                }
                attrs++;
        }
        return 0;
}

static const struct pmbus_limit_attr vin_limit_attrs[] = {
        {
                .reg = PMBUS_VIN_UV_WARN_LIMIT,
                .attr = "min",
                .alarm = "min_alarm",
                .sbit = PB_VOLTAGE_UV_WARNING,
        }, {
                .reg = PMBUS_VIN_UV_FAULT_LIMIT,
                .attr = "lcrit",
                .alarm = "lcrit_alarm",
                .sbit = PB_VOLTAGE_UV_FAULT,
        }, {
                .reg = PMBUS_VIN_OV_WARN_LIMIT,
                .attr = "max",
                .alarm = "max_alarm",
                .sbit = PB_VOLTAGE_OV_WARNING,
        }, {
                .reg = PMBUS_VIN_OV_FAULT_LIMIT,
                .attr = "crit",
                .alarm = "crit_alarm",
                .sbit = PB_VOLTAGE_OV_FAULT,
        }, {
                .reg = PMBUS_VIRT_READ_VIN_AVG,
                .update = true,
                .attr = "average",
        }, {
                .reg = PMBUS_VIRT_READ_VIN_MIN,
                .update = true,
                .attr = "lowest",
        }, {
                .reg = PMBUS_VIRT_READ_VIN_MAX,
                .update = true,
                .attr = "highest",
        }, {
                .reg = PMBUS_VIRT_RESET_VIN_HISTORY,
                .attr = "reset_history",
        }, {
                .reg = PMBUS_MFR_VIN_MIN,
                .attr = "rated_min",
        }, {
                .reg = PMBUS_MFR_VIN_MAX,
                .attr = "rated_max",
        },
};

static const struct pmbus_limit_attr vmon_limit_attrs[] = {
        {
                .reg = PMBUS_VIRT_VMON_UV_WARN_LIMIT,
                .attr = "min",
                .alarm = "min_alarm",
                .sbit = PB_VOLTAGE_UV_WARNING,
        }, {
                .reg = PMBUS_VIRT_VMON_UV_FAULT_LIMIT,
                .attr = "lcrit",
                .alarm = "lcrit_alarm",
                .sbit = PB_VOLTAGE_UV_FAULT,
        }, {
                .reg = PMBUS_VIRT_VMON_OV_WARN_LIMIT,
                .attr = "max",
                .alarm = "max_alarm",
                .sbit = PB_VOLTAGE_OV_WARNING,
        }, {
                .reg = PMBUS_VIRT_VMON_OV_FAULT_LIMIT,
                .attr = "crit",
                .alarm = "crit_alarm",
                .sbit = PB_VOLTAGE_OV_FAULT,
        }
};

static const struct pmbus_limit_attr vout_limit_attrs[] = {
        {
                .reg = PMBUS_VOUT_UV_WARN_LIMIT,
                .attr = "min",
                .alarm = "min_alarm",
                .sbit = PB_VOLTAGE_UV_WARNING,
        }, {
                .reg = PMBUS_VOUT_UV_FAULT_LIMIT,
                .attr = "lcrit",
                .alarm = "lcrit_alarm",
                .sbit = PB_VOLTAGE_UV_FAULT,
        }, {
                .reg = PMBUS_VOUT_OV_WARN_LIMIT,
                .attr = "max",
                .alarm = "max_alarm",
                .sbit = PB_VOLTAGE_OV_WARNING,
        }, {
                .reg = PMBUS_VOUT_OV_FAULT_LIMIT,
                .attr = "crit",
                .alarm = "crit_alarm",
                .sbit = PB_VOLTAGE_OV_FAULT,
        }, {
                .reg = PMBUS_VIRT_READ_VOUT_AVG,
                .update = true,
                .attr = "average",
        }, {
                .reg = PMBUS_VIRT_READ_VOUT_MIN,
                .update = true,
                .attr = "lowest",
        }, {
                .reg = PMBUS_VIRT_READ_VOUT_MAX,
                .update = true,
                .attr = "highest",
        }, {
                .reg = PMBUS_VIRT_RESET_VOUT_HISTORY,
                .attr = "reset_history",
        }, {
                .reg = PMBUS_MFR_VOUT_MIN,
                .attr = "rated_min",
        }, {
                .reg = PMBUS_MFR_VOUT_MAX,
                .attr = "rated_max",
        },
};

static const struct pmbus_sensor_attr voltage_attributes[] = {
        {
                .reg = PMBUS_READ_VIN,
                .class = PSC_VOLTAGE_IN,
                .label = "vin",
                .func = PMBUS_HAVE_VIN,
                .sfunc = PMBUS_HAVE_STATUS_INPUT,
                .sreg = PMBUS_STATUS_INPUT,
                .gbit = PB_STATUS_VIN_UV,
                .limit = vin_limit_attrs,
                .nlimit = ARRAY_SIZE(vin_limit_attrs),
        }, {
                .reg = PMBUS_VIRT_READ_VMON,
                .class = PSC_VOLTAGE_IN,
                .label = "vmon",
                .func = PMBUS_HAVE_VMON,
                .sfunc = PMBUS_HAVE_STATUS_VMON,
                .sreg = PMBUS_VIRT_STATUS_VMON,
                .limit = vmon_limit_attrs,
                .nlimit = ARRAY_SIZE(vmon_limit_attrs),
        }, {
                .reg = PMBUS_READ_VCAP,
                .class = PSC_VOLTAGE_IN,
                .label = "vcap",
                .func = PMBUS_HAVE_VCAP,
        }, {
                .reg = PMBUS_READ_VOUT,
                .class = PSC_VOLTAGE_OUT,
                .label = "vout",
                .paged = true,
                .func = PMBUS_HAVE_VOUT,
                .sfunc = PMBUS_HAVE_STATUS_VOUT,
                .sreg = PMBUS_STATUS_VOUT,
                .gbit = PB_STATUS_VOUT_OV,
                .limit = vout_limit_attrs,
                .nlimit = ARRAY_SIZE(vout_limit_attrs),
        }
};

/* Current attributes */

static const struct pmbus_limit_attr iin_limit_attrs[] = {
        {
                .reg = PMBUS_IIN_OC_WARN_LIMIT,
                .attr = "max",
                .alarm = "max_alarm",
                .sbit = PB_IIN_OC_WARNING,
        }, {
                .reg = PMBUS_IIN_OC_FAULT_LIMIT,
                .attr = "crit",
                .alarm = "crit_alarm",
                .sbit = PB_IIN_OC_FAULT,
        }, {
                .reg = PMBUS_VIRT_READ_IIN_AVG,
                .update = true,
                .attr = "average",
        }, {
                .reg = PMBUS_VIRT_READ_IIN_MIN,
                .update = true,
                .attr = "lowest",
        }, {
                .reg = PMBUS_VIRT_READ_IIN_MAX,
                .update = true,
                .attr = "highest",
        }, {
                .reg = PMBUS_VIRT_RESET_IIN_HISTORY,
                .attr = "reset_history",
        }, {
                .reg = PMBUS_MFR_IIN_MAX,
                .attr = "rated_max",
        },
};

static const struct pmbus_limit_attr iout_limit_attrs[] = {
        {
                .reg = PMBUS_IOUT_OC_WARN_LIMIT,
                .attr = "max",
                .alarm = "max_alarm",
                .sbit = PB_IOUT_OC_WARNING,
        }, {
                .reg = PMBUS_IOUT_UC_FAULT_LIMIT,
                .attr = "lcrit",
                .alarm = "lcrit_alarm",
                .sbit = PB_IOUT_UC_FAULT,
        }, {
                .reg = PMBUS_IOUT_OC_FAULT_LIMIT,
                .attr = "crit",
                .alarm = "crit_alarm",
                .sbit = PB_IOUT_OC_FAULT,
        }, {
                .reg = PMBUS_VIRT_READ_IOUT_AVG,
                .update = true,
                .attr = "average",
        }, {
                .reg = PMBUS_VIRT_READ_IOUT_MIN,
                .update = true,
                .attr = "lowest",
        }, {
                .reg = PMBUS_VIRT_READ_IOUT_MAX,
                .update = true,
                .attr = "highest",
        }, {
                .reg = PMBUS_VIRT_RESET_IOUT_HISTORY,
                .attr = "reset_history",
        }, {
                .reg = PMBUS_MFR_IOUT_MAX,
                .attr = "rated_max",
        },
};

static const struct pmbus_sensor_attr current_attributes[] = {
        {
                .reg = PMBUS_READ_IIN,
                .class = PSC_CURRENT_IN,
                .label = "iin",
                .func = PMBUS_HAVE_IIN,
                .sfunc = PMBUS_HAVE_STATUS_INPUT,
                .sreg = PMBUS_STATUS_INPUT,
                .gbit = PB_STATUS_INPUT,
                .limit = iin_limit_attrs,
                .nlimit = ARRAY_SIZE(iin_limit_attrs),
        }, {
                .reg = PMBUS_READ_IOUT,
                .class = PSC_CURRENT_OUT,
                .label = "iout",
                .paged = true,
                .func = PMBUS_HAVE_IOUT,
                .sfunc = PMBUS_HAVE_STATUS_IOUT,
                .sreg = PMBUS_STATUS_IOUT,
                .gbit = PB_STATUS_IOUT_OC,
                .limit = iout_limit_attrs,
                .nlimit = ARRAY_SIZE(iout_limit_attrs),
        }
};

/* Power attributes */

static const struct pmbus_limit_attr pin_limit_attrs[] = {
        {
                .reg = PMBUS_PIN_OP_WARN_LIMIT,
                .attr = "max",
                .alarm = "alarm",
                .sbit = PB_PIN_OP_WARNING,
        }, {
                .reg = PMBUS_VIRT_READ_PIN_AVG,
                .update = true,
                .attr = "average",
        }, {
                .reg = PMBUS_VIRT_READ_PIN_MIN,
                .update = true,
                .attr = "input_lowest",
        }, {
                .reg = PMBUS_VIRT_READ_PIN_MAX,
                .update = true,
                .attr = "input_highest",
        }, {
                .reg = PMBUS_VIRT_RESET_PIN_HISTORY,
                .attr = "reset_history",
        }, {
                .reg = PMBUS_MFR_PIN_MAX,
                .attr = "rated_max",
        },
};

static const struct pmbus_limit_attr pout_limit_attrs[] = {
        {
                .reg = PMBUS_POUT_MAX,
                .attr = "cap",
                .alarm = "cap_alarm",
                .sbit = PB_POWER_LIMITING,
        }, {
                .reg = PMBUS_POUT_OP_WARN_LIMIT,
                .attr = "max",
                .alarm = "max_alarm",
                .sbit = PB_POUT_OP_WARNING,
        }, {
                .reg = PMBUS_POUT_OP_FAULT_LIMIT,
                .attr = "crit",
                .alarm = "crit_alarm",
                .sbit = PB_POUT_OP_FAULT,
        }, {
                .reg = PMBUS_VIRT_READ_POUT_AVG,
                .update = true,
                .attr = "average",
        }, {
                .reg = PMBUS_VIRT_READ_POUT_MIN,
                .update = true,
                .attr = "input_lowest",
        }, {
                .reg = PMBUS_VIRT_READ_POUT_MAX,
                .update = true,
                .attr = "input_highest",
        }, {
                .reg = PMBUS_VIRT_RESET_POUT_HISTORY,
                .attr = "reset_history",
        }, {
                .reg = PMBUS_MFR_POUT_MAX,
                .attr = "rated_max",
        },
};

static const struct pmbus_sensor_attr power_attributes[] = {
        {
                .reg = PMBUS_READ_PIN,
                .class = PSC_POWER,
                .label = "pin",
                .func = PMBUS_HAVE_PIN,
                .sfunc = PMBUS_HAVE_STATUS_INPUT,
                .sreg = PMBUS_STATUS_INPUT,
                .gbit = PB_STATUS_INPUT,
                .limit = pin_limit_attrs,
                .nlimit = ARRAY_SIZE(pin_limit_attrs),
        }, {
                .reg = PMBUS_READ_POUT,
                .class = PSC_POWER,
                .label = "pout",
                .paged = true,
                .func = PMBUS_HAVE_POUT,
                .sfunc = PMBUS_HAVE_STATUS_IOUT,
                .sreg = PMBUS_STATUS_IOUT,
                .limit = pout_limit_attrs,
                .nlimit = ARRAY_SIZE(pout_limit_attrs),
        }
};

/* Temperature atributes */

static const struct pmbus_limit_attr temp_limit_attrs[] = {
        {
                .reg = PMBUS_UT_WARN_LIMIT,
                .low = true,
                .attr = "min",
                .alarm = "min_alarm",
                .sbit = PB_TEMP_UT_WARNING,
        }, {
                .reg = PMBUS_UT_FAULT_LIMIT,
                .low = true,
                .attr = "lcrit",
                .alarm = "lcrit_alarm",
                .sbit = PB_TEMP_UT_FAULT,
        }, {
                .reg = PMBUS_OT_WARN_LIMIT,
                .attr = "max",
                .alarm = "max_alarm",
                .sbit = PB_TEMP_OT_WARNING,
        }, {
                .reg = PMBUS_OT_FAULT_LIMIT,
                .attr = "crit",
                .alarm = "crit_alarm",
                .sbit = PB_TEMP_OT_FAULT,
        }, {
                .reg = PMBUS_VIRT_READ_TEMP_MIN,
                .attr = "lowest",
        }, {
                .reg = PMBUS_VIRT_READ_TEMP_AVG,
                .attr = "average",
        }, {
                .reg = PMBUS_VIRT_READ_TEMP_MAX,
                .attr = "highest",
        }, {
                .reg = PMBUS_VIRT_RESET_TEMP_HISTORY,
                .attr = "reset_history",
        }, {
                .reg = PMBUS_MFR_MAX_TEMP_1,
                .attr = "rated_max",
        },
};

static const struct pmbus_limit_attr temp_limit_attrs2[] = {
        {
                .reg = PMBUS_UT_WARN_LIMIT,
                .low = true,
                .attr = "min",
                .alarm = "min_alarm",
                .sbit = PB_TEMP_UT_WARNING,
        }, {
                .reg = PMBUS_UT_FAULT_LIMIT,
                .low = true,
                .attr = "lcrit",
                .alarm = "lcrit_alarm",
                .sbit = PB_TEMP_UT_FAULT,
        }, {
                .reg = PMBUS_OT_WARN_LIMIT,
                .attr = "max",
                .alarm = "max_alarm",
                .sbit = PB_TEMP_OT_WARNING,
        }, {
                .reg = PMBUS_OT_FAULT_LIMIT,
                .attr = "crit",
                .alarm = "crit_alarm",
                .sbit = PB_TEMP_OT_FAULT,
        }, {
                .reg = PMBUS_VIRT_READ_TEMP2_MIN,
                .attr = "lowest",
        }, {
                .reg = PMBUS_VIRT_READ_TEMP2_AVG,
                .attr = "average",
        }, {
                .reg = PMBUS_VIRT_READ_TEMP2_MAX,
                .attr = "highest",
        }, {
                .reg = PMBUS_VIRT_RESET_TEMP2_HISTORY,
                .attr = "reset_history",
        }, {
                .reg = PMBUS_MFR_MAX_TEMP_2,
                .attr = "rated_max",
        },
};

static const struct pmbus_limit_attr temp_limit_attrs3[] = {
        {
                .reg = PMBUS_UT_WARN_LIMIT,
                .low = true,
                .attr = "min",
                .alarm = "min_alarm",
                .sbit = PB_TEMP_UT_WARNING,
        }, {
                .reg = PMBUS_UT_FAULT_LIMIT,
                .low = true,
                .attr = "lcrit",
                .alarm = "lcrit_alarm",
                .sbit = PB_TEMP_UT_FAULT,
        }, {
                .reg = PMBUS_OT_WARN_LIMIT,
                .attr = "max",
                .alarm = "max_alarm",
                .sbit = PB_TEMP_OT_WARNING,
        }, {
                .reg = PMBUS_OT_FAULT_LIMIT,
                .attr = "crit",
                .alarm = "crit_alarm",
                .sbit = PB_TEMP_OT_FAULT,
        }, {
                .reg = PMBUS_MFR_MAX_TEMP_3,
                .attr = "rated_max",
        },
};

static const struct pmbus_sensor_attr temp_attributes[] = {
        {
                .reg = PMBUS_READ_TEMPERATURE_1,
                .class = PSC_TEMPERATURE,
                .paged = true,
                .update = true,
                .compare = true,
                .func = PMBUS_HAVE_TEMP,
                .sfunc = PMBUS_HAVE_STATUS_TEMP,
                .sreg = PMBUS_STATUS_TEMPERATURE,
                .gbit = PB_STATUS_TEMPERATURE,
                .limit = temp_limit_attrs,
                .nlimit = ARRAY_SIZE(temp_limit_attrs),
        }, {
                .reg = PMBUS_READ_TEMPERATURE_2,
                .class = PSC_TEMPERATURE,
                .paged = true,
                .update = true,
                .compare = true,
                .func = PMBUS_HAVE_TEMP2,
                .sfunc = PMBUS_HAVE_STATUS_TEMP,
                .sreg = PMBUS_STATUS_TEMPERATURE,
                .gbit = PB_STATUS_TEMPERATURE,
                .limit = temp_limit_attrs2,
                .nlimit = ARRAY_SIZE(temp_limit_attrs2),
        }, {
                .reg = PMBUS_READ_TEMPERATURE_3,
                .class = PSC_TEMPERATURE,
                .paged = true,
                .update = true,
                .compare = true,
                .func = PMBUS_HAVE_TEMP3,
                .sfunc = PMBUS_HAVE_STATUS_TEMP,
                .sreg = PMBUS_STATUS_TEMPERATURE,
                .gbit = PB_STATUS_TEMPERATURE,
                .limit = temp_limit_attrs3,
                .nlimit = ARRAY_SIZE(temp_limit_attrs3),
        }
};

static const int pmbus_fan_registers[] = {
        PMBUS_READ_FAN_SPEED_1,
        PMBUS_READ_FAN_SPEED_2,
        PMBUS_READ_FAN_SPEED_3,
        PMBUS_READ_FAN_SPEED_4
};

static const int pmbus_fan_status_registers[] = {
        PMBUS_STATUS_FAN_12,
        PMBUS_STATUS_FAN_12,
        PMBUS_STATUS_FAN_34,
        PMBUS_STATUS_FAN_34
};

static const u32 pmbus_fan_flags[] = {
        PMBUS_HAVE_FAN12,
        PMBUS_HAVE_FAN12,
        PMBUS_HAVE_FAN34,
        PMBUS_HAVE_FAN34
};

static const u32 pmbus_fan_status_flags[] = {
        PMBUS_HAVE_STATUS_FAN12,
        PMBUS_HAVE_STATUS_FAN12,
        PMBUS_HAVE_STATUS_FAN34,
        PMBUS_HAVE_STATUS_FAN34
};

/* Fans */

/* Precondition: FAN_CONFIG_x_y and FAN_COMMAND_x must exist for the fan ID */
static int pmbus_add_fan_ctrl(struct i2c_client *client,
                struct pmbus_data *data, int index, int page, int id,
                u8 config)
{
        struct pmbus_sensor *sensor;

        sensor = pmbus_add_sensor(data, "fan", "target", index, page,
                                  0xff, PMBUS_VIRT_FAN_TARGET_1 + id, PSC_FAN,
                                  false, false, true);

        if (!sensor)
                return -ENOMEM;

        if (!((data->info->func[page] & PMBUS_HAVE_PWM12) ||
                        (data->info->func[page] & PMBUS_HAVE_PWM34)))
                return 0;

        sensor = pmbus_add_sensor(data, "pwm", NULL, index, page,
                                  0xff, PMBUS_VIRT_PWM_1 + id, PSC_PWM,
                                  false, false, true);

        if (!sensor)
                return -ENOMEM;

        sensor = pmbus_add_sensor(data, "pwm", "enable", index, page,
                                  0xff, PMBUS_VIRT_PWM_ENABLE_1 + id, PSC_PWM,
                                  true, false, false);

        if (!sensor)
                return -ENOMEM;

        return 0;
}

static int pmbus_add_fan_attributes(struct i2c_client *client,
                                    struct pmbus_data *data)
{
        const struct pmbus_driver_info *info = data->info;
        int index = 1;
        int page;
        int ret;

        for (page = 0; page < info->pages; page++) {
                int f;

                for (f = 0; f < ARRAY_SIZE(pmbus_fan_registers); f++) {
                        int regval;

                        if (!(info->func[page] & pmbus_fan_flags[f]))
                                break;

                        if (!pmbus_check_word_register(client, page,
                                                       pmbus_fan_registers[f]))
                                break;

                        /*
                         * Skip fan if not installed.
                         * Each fan configuration register covers multiple fans,
                         * so we have to do some magic.
                         */
                        regval = _pmbus_read_byte_data(client, page,
                                pmbus_fan_config_registers[f]);
                        if (regval < 0 ||
                            (!(regval & (PB_FAN_1_INSTALLED >> ((f & 1) * 4)))))
                                continue;

                        if (pmbus_add_sensor(data, "fan", "input", index,
                                             page, 0xff, pmbus_fan_registers[f],
                                             PSC_FAN, true, true, true) == NULL)
                                return -ENOMEM;

                        /* Fan control */
                        if (pmbus_check_word_register(client, page,
                                        pmbus_fan_command_registers[f])) {
                                ret = pmbus_add_fan_ctrl(client, data, index,
                                                         page, f, regval);
                                if (ret < 0)
                                        return ret;
                        }

                        /*
                         * Each fan status register covers multiple fans,
                         * so we have to do some magic.
                         */
                        if ((info->func[page] & pmbus_fan_status_flags[f]) &&
                            pmbus_check_byte_register(client,
                                        page, pmbus_fan_status_registers[f])) {
                                int reg;

                                if (f > 1)      /* fan 3, 4 */
                                        reg = PMBUS_STATUS_FAN_34;
                                else
                                        reg = PMBUS_STATUS_FAN_12;
                                ret = pmbus_add_boolean(data, "fan",
                                        "alarm", index, NULL, NULL, page, reg,
                                        PB_FAN_FAN1_WARNING >> (f & 1));
                                if (ret)
                                        return ret;
                                ret = pmbus_add_boolean(data, "fan",
                                        "fault", index, NULL, NULL, page, reg,
                                        PB_FAN_FAN1_FAULT >> (f & 1));
                                if (ret)
                                        return ret;
                        }
                        index++;
                }
        }
        return 0;
}

struct pmbus_samples_attr {
        int reg;
        char *name;
};

struct pmbus_samples_reg {
        int page;
        struct pmbus_samples_attr *attr;
        struct device_attribute dev_attr;
};

static struct pmbus_samples_attr pmbus_samples_registers[] = {
        {
                .reg = PMBUS_VIRT_SAMPLES,
                .name = "samples",
        }, {
                .reg = PMBUS_VIRT_IN_SAMPLES,
                .name = "in_samples",
        }, {
                .reg = PMBUS_VIRT_CURR_SAMPLES,

                .name = "curr_samples",
        }, {
                .reg = PMBUS_VIRT_POWER_SAMPLES,
                .name = "power_samples",
        }, {
                .reg = PMBUS_VIRT_TEMP_SAMPLES,
                .name = "temp_samples",
        }
};

#define to_samples_reg(x) container_of(x, struct pmbus_samples_reg, dev_attr)

static ssize_t pmbus_show_samples(struct device *dev,
                                  struct device_attribute *devattr, char *buf)
{
        int val;
        struct i2c_client *client = to_i2c_client(dev->parent);
        struct pmbus_samples_reg *reg = to_samples_reg(devattr);
        struct pmbus_data *data = i2c_get_clientdata(client);

        mutex_lock(&data->update_lock);
        val = _pmbus_read_word_data(client, reg->page, 0xff, reg->attr->reg);
        mutex_unlock(&data->update_lock);
        if (val < 0)
                return val;

        return snprintf(buf, PAGE_SIZE, "%d\n", val);
}

static ssize_t pmbus_set_samples(struct device *dev,
                                 struct device_attribute *devattr,
                                 const char *buf, size_t count)
{
        int ret;
        long val;
        struct i2c_client *client = to_i2c_client(dev->parent);
        struct pmbus_samples_reg *reg = to_samples_reg(devattr);
        struct pmbus_data *data = i2c_get_clientdata(client);

        if (kstrtol(buf, 0, &val) < 0)
                return -EINVAL;

        mutex_lock(&data->update_lock);
        ret = _pmbus_write_word_data(client, reg->page, reg->attr->reg, val);
        mutex_unlock(&data->update_lock);

        return ret ? : count;
}

static int pmbus_add_samples_attr(struct pmbus_data *data, int page,
                                  struct pmbus_samples_attr *attr)
{
        struct pmbus_samples_reg *reg;

        reg = devm_kzalloc(data->dev, sizeof(*reg), GFP_KERNEL);
        if (!reg)
                return -ENOMEM;

        reg->attr = attr;
        reg->page = page;

        pmbus_dev_attr_init(&reg->dev_attr, attr->name, 0644,
                            pmbus_show_samples, pmbus_set_samples);

        return pmbus_add_attribute(data, &reg->dev_attr.attr);
}

static int pmbus_add_samples_attributes(struct i2c_client *client,
                                        struct pmbus_data *data)
{
        const struct pmbus_driver_info *info = data->info;
        int s;

        if (!(info->func[0] & PMBUS_HAVE_SAMPLES))
                return 0;

        for (s = 0; s < ARRAY_SIZE(pmbus_samples_registers); s++) {
                struct pmbus_samples_attr *attr;
                int ret;

                attr = &pmbus_samples_registers[s];
                if (!pmbus_check_word_register(client, 0, attr->reg))
                        continue;

                ret = pmbus_add_samples_attr(data, 0, attr);
                if (ret)
                        return ret;
        }

        return 0;
}

static int pmbus_find_attributes(struct i2c_client *client,
                                 struct pmbus_data *data)
{
        int ret;

        /* Voltage sensors */
        ret = pmbus_add_sensor_attrs(client, data, "in", voltage_attributes,
                                     ARRAY_SIZE(voltage_attributes));
        if (ret)
                return ret;

        /* Current sensors */
        ret = pmbus_add_sensor_attrs(client, data, "curr", current_attributes,
                                     ARRAY_SIZE(current_attributes));
        if (ret)
                return ret;

        /* Power sensors */
        ret = pmbus_add_sensor_attrs(client, data, "power", power_attributes,
                                     ARRAY_SIZE(power_attributes));
        if (ret)
                return ret;

        /* Temperature sensors */
        ret = pmbus_add_sensor_attrs(client, data, "temp", temp_attributes,
                                     ARRAY_SIZE(temp_attributes));
        if (ret)
                return ret;

        /* Fans */
        ret = pmbus_add_fan_attributes(client, data);
        if (ret)
                return ret;

        ret = pmbus_add_samples_attributes(client, data);
        return ret;
}

/*
 * Identify chip parameters.
 * This function is called for all chips.
 */
static int pmbus_identify_common(struct i2c_client *client,
                                 struct pmbus_data *data, int page)
{
        int vout_mode = -1;

        if (pmbus_check_byte_register(client, page, PMBUS_VOUT_MODE))
                vout_mode = _pmbus_read_byte_data(client, page,
                                                  PMBUS_VOUT_MODE);
        if (vout_mode >= 0 && vout_mode != 0xff) {
                /*
                 * Not all chips support the VOUT_MODE command,
                 * so a failure to read it is not an error.
                 */
                switch (vout_mode >> 5) {
                case 0: /* linear mode      */
                        if (data->info->format[PSC_VOLTAGE_OUT] != linear)
                                return -ENODEV;

                        data->exponent[page] = ((s8)(vout_mode << 3)) >> 3;
                        break;
                case 1: /* VID mode         */
                        if (data->info->format[PSC_VOLTAGE_OUT] != vid)
                                return -ENODEV;
                        break;
                case 2: /* direct mode      */
                        if (data->info->format[PSC_VOLTAGE_OUT] != direct)
                                return -ENODEV;
                        break;
                default:
                        return -ENODEV;
                }
        }

        pmbus_clear_fault_page(client, page);
        return 0;
}

static int pmbus_read_status_byte(struct i2c_client *client, int page)
{
        return _pmbus_read_byte_data(client, page, PMBUS_STATUS_BYTE);
}

static int pmbus_read_status_word(struct i2c_client *client, int page)
{
        return _pmbus_read_word_data(client, page, 0xff, PMBUS_STATUS_WORD);
}

static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
                             struct pmbus_driver_info *info)
{
        struct device *dev = &client->dev;
        int page, ret;

        /*
         * Some PMBus chips don't support PMBUS_STATUS_WORD, so try
         * to use PMBUS_STATUS_BYTE instead if that is the case.
         * Bail out if both registers are not supported.
         */
        data->read_status = pmbus_read_status_word;
        ret = i2c_smbus_read_word_data(client, PMBUS_STATUS_WORD);
        if (ret < 0 || ret == 0xffff) {
                data->read_status = pmbus_read_status_byte;
                ret = i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE);
                if (ret < 0 || ret == 0xff) {
                        dev_err(dev, "PMBus status register not found\n");
                        return -ENODEV;
                }
        } else {
                data->has_status_word = true;
        }

        /* Enable PEC if the controller supports it */
        ret = i2c_smbus_read_byte_data(client, PMBUS_CAPABILITY);
        if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK))
                client->flags |= I2C_CLIENT_PEC;

        /*
         * Check if the chip is write protected. If it is, we can not clear
         * faults, and we should not try it. Also, in that case, writes into
         * limit registers need to be disabled.
         */
        ret = i2c_smbus_read_byte_data(client, PMBUS_WRITE_PROTECT);
        if (ret > 0 && (ret & PB_WP_ANY))
                data->flags |= PMBUS_WRITE_PROTECTED | PMBUS_SKIP_STATUS_CHECK;

        if (data->info->pages)
                pmbus_clear_faults(client);
        else
                pmbus_clear_fault_page(client, -1);

        if (info->identify) {
                ret = (*info->identify)(client, info);
                if (ret < 0) {
                        dev_err(dev, "Chip identification failed\n");
                        return ret;
                }
        }

        if (info->pages <= 0 || info->pages > PMBUS_PAGES) {
                dev_err(dev, "Bad number of PMBus pages: %d\n", info->pages);
                return -ENODEV;
        }

        for (page = 0; page < info->pages; page++) {
                ret = pmbus_identify_common(client, data, page);
                if (ret < 0) {
                        dev_err(dev, "Failed to identify chip capabilities\n");
                        return ret;
                }
        }
        return 0;
}

#if IS_ENABLED(CONFIG_REGULATOR)
static int pmbus_regulator_is_enabled(struct regulator_dev *rdev)
{
        struct device *dev = rdev_get_dev(rdev);
        struct i2c_client *client = to_i2c_client(dev->parent);
        u8 page = rdev_get_id(rdev);
        int ret;

        ret = pmbus_read_byte_data(client, page, PMBUS_OPERATION);
        if (ret < 0)
                return ret;

        return !!(ret & PB_OPERATION_CONTROL_ON);
}

static int _pmbus_regulator_on_off(struct regulator_dev *rdev, bool enable)
{
        struct device *dev = rdev_get_dev(rdev);
        struct i2c_client *client = to_i2c_client(dev->parent);
        u8 page = rdev_get_id(rdev);

        return pmbus_update_byte_data(client, page, PMBUS_OPERATION,
                                      PB_OPERATION_CONTROL_ON,
                                      enable ? PB_OPERATION_CONTROL_ON : 0);
}

static int pmbus_regulator_enable(struct regulator_dev *rdev)
{
        return _pmbus_regulator_on_off(rdev, 1);
}

static int pmbus_regulator_disable(struct regulator_dev *rdev)
{
        return _pmbus_regulator_on_off(rdev, 0);
}

const struct regulator_ops pmbus_regulator_ops = {
        .enable = pmbus_regulator_enable,
        .disable = pmbus_regulator_disable,
        .is_enabled = pmbus_regulator_is_enabled,
};
EXPORT_SYMBOL_GPL(pmbus_regulator_ops);

static int pmbus_regulator_register(struct pmbus_data *data)
{
        struct device *dev = data->dev;
        const struct pmbus_driver_info *info = data->info;
        const struct pmbus_platform_data *pdata = dev_get_platdata(dev);
        struct regulator_dev *rdev;
        int i;

        for (i = 0; i < info->num_regulators; i++) {
                struct regulator_config config = { };

                config.dev = dev;
                config.driver_data = data;

                if (pdata && pdata->reg_init_data)
                        config.init_data = &pdata->reg_init_data[i];

                rdev = devm_regulator_register(dev, &info->reg_desc[i],
                                               &config);
                if (IS_ERR(rdev)) {
                        dev_err(dev, "Failed to register %s regulator\n",
                                info->reg_desc[i].name);
                        return PTR_ERR(rdev);
                }
        }

        return 0;
}
#else
static int pmbus_regulator_register(struct pmbus_data *data)
{
        return 0;
}
#endif

static struct dentry *pmbus_debugfs_dir;        /* pmbus debugfs directory */

#if IS_ENABLED(CONFIG_DEBUG_FS)
static int pmbus_debugfs_get(void *data, u64 *val)
{
        int rc;
        struct pmbus_debugfs_entry *entry = data;

        rc = _pmbus_read_byte_data(entry->client, entry->page, entry->reg);
        if (rc < 0)
                return rc;

        *val = rc;

        return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(pmbus_debugfs_ops, pmbus_debugfs_get, NULL,
                         "0x%02llx\n");

static int pmbus_debugfs_get_status(void *data, u64 *val)
{
        int rc;
        struct pmbus_debugfs_entry *entry = data;
        struct pmbus_data *pdata = i2c_get_clientdata(entry->client);

        rc = pdata->read_status(entry->client, entry->page);
        if (rc < 0)
                return rc;

        *val = rc;

        return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(pmbus_debugfs_ops_status, pmbus_debugfs_get_status,
                         NULL, "0x%04llx\n");

static int pmbus_debugfs_get_pec(void *data, u64 *val)
{
        struct i2c_client *client = data;

        *val = !!(client->flags & I2C_CLIENT_PEC);

        return 0;
}

static int pmbus_debugfs_set_pec(void *data, u64 val)
{
        int rc;
        struct i2c_client *client = data;

        if (!val) {
                client->flags &= ~I2C_CLIENT_PEC;
                return 0;
        }

        if (val != 1)
                return -EINVAL;

        rc = i2c_smbus_read_byte_data(client, PMBUS_CAPABILITY);
        if (rc < 0)
                return rc;

        if (!(rc & PB_CAPABILITY_ERROR_CHECK))
                return -EOPNOTSUPP;

        client->flags |= I2C_CLIENT_PEC;

        return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(pmbus_debugfs_ops_pec, pmbus_debugfs_get_pec,
                         pmbus_debugfs_set_pec, "%llu\n");

static void pmbus_remove_debugfs(void *data)
{
        struct dentry *entry = data;

        debugfs_remove_recursive(entry);
}

static int pmbus_init_debugfs(struct i2c_client *client,
                              struct pmbus_data *data)
{
        int i, idx = 0;
        char name[PMBUS_NAME_SIZE];
        struct pmbus_debugfs_entry *entries;

        if (!pmbus_debugfs_dir)
                return -ENODEV;

        /*
         * Create the debugfs directory for this device. Use the hwmon device
         * name to avoid conflicts (hwmon numbers are globally unique).
         */
        data->debugfs = debugfs_create_dir(dev_name(data->hwmon_dev),
                                           pmbus_debugfs_dir);
        if (IS_ERR_OR_NULL(data->debugfs)) {
                data->debugfs = NULL;
                return -ENODEV;
        }

        /* Allocate the max possible entries we need. */
        entries = devm_kcalloc(data->dev,
                               data->info->pages * 10, sizeof(*entries),
                               GFP_KERNEL);
        if (!entries)
                return -ENOMEM;

        debugfs_create_file("pec", 0664, data->debugfs, client,
                            &pmbus_debugfs_ops_pec);

        for (i = 0; i < data->info->pages; ++i) {
                /* Check accessibility of status register if it's not page 0 */
                if (!i || pmbus_check_status_register(client, i)) {
                        /* No need to set reg as we have special read op. */
                        entries[idx].client = client;
                        entries[idx].page = i;
                        scnprintf(name, PMBUS_NAME_SIZE, "status%d", i);
                        debugfs_create_file(name, 0444, data->debugfs,
                                            &entries[idx++],
                                            &pmbus_debugfs_ops_status);
                }

                if (data->info->func[i] & PMBUS_HAVE_STATUS_VOUT) {
                        entries[idx].client = client;
                        entries[idx].page = i;
                        entries[idx].reg = PMBUS_STATUS_VOUT;
                        scnprintf(name, PMBUS_NAME_SIZE, "status%d_vout", i);
                        debugfs_create_file(name, 0444, data->debugfs,
                                            &entries[idx++],
                                            &pmbus_debugfs_ops);
                }

                if (data->info->func[i] & PMBUS_HAVE_STATUS_IOUT) {
                        entries[idx].client = client;
                        entries[idx].page = i;
                        entries[idx].reg = PMBUS_STATUS_IOUT;
                        scnprintf(name, PMBUS_NAME_SIZE, "status%d_iout", i);
                        debugfs_create_file(name, 0444, data->debugfs,
                                            &entries[idx++],
                                            &pmbus_debugfs_ops);
                }

                if (data->info->func[i] & PMBUS_HAVE_STATUS_INPUT) {
                        entries[idx].client = client;
                        entries[idx].page = i;
                        entries[idx].reg = PMBUS_STATUS_INPUT;
                        scnprintf(name, PMBUS_NAME_SIZE, "status%d_input", i);
                        debugfs_create_file(name, 0444, data->debugfs,
                                            &entries[idx++],
                                            &pmbus_debugfs_ops);
                }

                if (data->info->func[i] & PMBUS_HAVE_STATUS_TEMP) {
                        entries[idx].client = client;
                        entries[idx].page = i;
                        entries[idx].reg = PMBUS_STATUS_TEMPERATURE;
                        scnprintf(name, PMBUS_NAME_SIZE, "status%d_temp", i);
                        debugfs_create_file(name, 0444, data->debugfs,
                                            &entries[idx++],
                                            &pmbus_debugfs_ops);
                }

                if (pmbus_check_byte_register(client, i, PMBUS_STATUS_CML)) {
                        entries[idx].client = client;
                        entries[idx].page = i;
                        entries[idx].reg = PMBUS_STATUS_CML;
                        scnprintf(name, PMBUS_NAME_SIZE, "status%d_cml", i);
                        debugfs_create_file(name, 0444, data->debugfs,
                                            &entries[idx++],
                                            &pmbus_debugfs_ops);
                }

                if (pmbus_check_byte_register(client, i, PMBUS_STATUS_OTHER)) {
                        entries[idx].client = client;
                        entries[idx].page = i;
                        entries[idx].reg = PMBUS_STATUS_OTHER;
                        scnprintf(name, PMBUS_NAME_SIZE, "status%d_other", i);
                        debugfs_create_file(name, 0444, data->debugfs,
                                            &entries[idx++],
                                            &pmbus_debugfs_ops);
                }

                if (pmbus_check_byte_register(client, i,
                                              PMBUS_STATUS_MFR_SPECIFIC)) {
                        entries[idx].client = client;
                        entries[idx].page = i;
                        entries[idx].reg = PMBUS_STATUS_MFR_SPECIFIC;
                        scnprintf(name, PMBUS_NAME_SIZE, "status%d_mfr", i);
                        debugfs_create_file(name, 0444, data->debugfs,
                                            &entries[idx++],
                                            &pmbus_debugfs_ops);
                }

                if (data->info->func[i] & PMBUS_HAVE_STATUS_FAN12) {
                        entries[idx].client = client;
                        entries[idx].page = i;
                        entries[idx].reg = PMBUS_STATUS_FAN_12;
                        scnprintf(name, PMBUS_NAME_SIZE, "status%d_fan12", i);
                        debugfs_create_file(name, 0444, data->debugfs,
                                            &entries[idx++],
                                            &pmbus_debugfs_ops);
                }

                if (data->info->func[i] & PMBUS_HAVE_STATUS_FAN34) {
                        entries[idx].client = client;
                        entries[idx].page = i;
                        entries[idx].reg = PMBUS_STATUS_FAN_34;
                        scnprintf(name, PMBUS_NAME_SIZE, "status%d_fan34", i);
                        debugfs_create_file(name, 0444, data->debugfs,
                                            &entries[idx++],
                                            &pmbus_debugfs_ops);
                }
        }

        return devm_add_action_or_reset(data->dev,
                                        pmbus_remove_debugfs, data->debugfs);
}
#else
static int pmbus_init_debugfs(struct i2c_client *client,
                              struct pmbus_data *data)
{
        return 0;
}
#endif  /* IS_ENABLED(CONFIG_DEBUG_FS) */

int pmbus_do_probe(struct i2c_client *client, struct pmbus_driver_info *info)
{
        struct device *dev = &client->dev;
        const struct pmbus_platform_data *pdata = dev_get_platdata(dev);
        struct pmbus_data *data;
        size_t groups_num = 0;
        int ret;

        if (!info)
                return -ENODEV;

        if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE
                                     | I2C_FUNC_SMBUS_BYTE_DATA
                                     | I2C_FUNC_SMBUS_WORD_DATA))
                return -ENODEV;

        data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
        if (!data)
                return -ENOMEM;

        if (info->groups)
                while (info->groups[groups_num])
                        groups_num++;

        data->groups = devm_kcalloc(dev, groups_num + 2, sizeof(void *),
                                    GFP_KERNEL);
        if (!data->groups)
                return -ENOMEM;

        i2c_set_clientdata(client, data);
        mutex_init(&data->update_lock);
        data->dev = dev;

        if (pdata)
                data->flags = pdata->flags;
        data->info = info;
        data->currpage = -1;
        data->currphase = -1;

        ret = pmbus_init_common(client, data, info);
        if (ret < 0)
                return ret;

        ret = pmbus_find_attributes(client, data);
        if (ret)
                return ret;

        /*
         * If there are no attributes, something is wrong.
         * Bail out instead of trying to register nothing.
         */
        if (!data->num_attributes) {
                dev_err(dev, "No attributes found\n");
                return -ENODEV;
        }

        data->groups[0] = &data->group;
        memcpy(data->groups + 1, info->groups, sizeof(void *) * groups_num);
        data->hwmon_dev = devm_hwmon_device_register_with_groups(dev,
                                        client->name, data, data->groups);
        if (IS_ERR(data->hwmon_dev)) {
                dev_err(dev, "Failed to register hwmon device\n");
                return PTR_ERR(data->hwmon_dev);
        }

        ret = pmbus_regulator_register(data);
        if (ret)
                return ret;

        ret = pmbus_init_debugfs(client, data);
        if (ret)
                dev_warn(dev, "Failed to register debugfs\n");

        return 0;
}
EXPORT_SYMBOL_GPL(pmbus_do_probe);

struct dentry *pmbus_get_debugfs_dir(struct i2c_client *client)
{
        struct pmbus_data *data = i2c_get_clientdata(client);

        return data->debugfs;
}
EXPORT_SYMBOL_GPL(pmbus_get_debugfs_dir);

static int __init pmbus_core_init(void)
{
        pmbus_debugfs_dir = debugfs_create_dir("pmbus", NULL);
        if (IS_ERR(pmbus_debugfs_dir))
                pmbus_debugfs_dir = NULL;

        return 0;
}

static void __exit pmbus_core_exit(void)
{
        debugfs_remove_recursive(pmbus_debugfs_dir);
}

module_init(pmbus_core_init);
module_exit(pmbus_core_exit);

MODULE_AUTHOR("Guenter Roeck");
MODULE_DESCRIPTION("PMBus core driver");
MODULE_LICENSE("GPL");