LXR linux/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h

   1/* SPDX-License-Identifier: GPL-2.0-or-later */
   2/*
   3   cx231xx-pcb-cfg.h - driver for Conexant
   4                Cx23100/101/102 USB video capture devices
   5
   6   Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
   7
   8 */
   9
  10#ifndef _PCB_CONFIG_H_
  11#define _PCB_CONFIG_H_
  12
  13#include <linux/init.h>
  14#include <linux/module.h>
  15
  16/***************************************************************************
  17                                * Class Information *
  18***************************************************************************/
  19#define CLASS_DEFAULT       0xFF
  20
  21enum VENDOR_REQUEST_TYPE {
  22        /* Set/Get I2C */
  23        VRT_SET_I2C0 = 0x0,
  24        VRT_SET_I2C1 = 0x1,
  25        VRT_SET_I2C2 = 0x2,
  26        VRT_GET_I2C0 = 0x4,
  27        VRT_GET_I2C1 = 0x5,
  28        VRT_GET_I2C2 = 0x6,
  29
  30        /* Set/Get GPIO */
  31        VRT_SET_GPIO = 0x8,
  32        VRT_GET_GPIO = 0x9,
  33
  34        /* Set/Get GPIE */
  35        VRT_SET_GPIE = 0xA,
  36        VRT_GET_GPIE = 0xB,
  37
  38        /* Set/Get Register Control/Status */
  39        VRT_SET_REGISTER = 0xC,
  40        VRT_GET_REGISTER = 0xD,
  41
  42        /* Get Extended Compat ID Descriptor */
  43        VRT_GET_EXTCID_DESC = 0xFF,
  44};
  45
  46enum BYTE_ENABLE_MASK {
  47        ENABLE_ONE_BYTE = 0x1,
  48        ENABLE_TWE_BYTE = 0x3,
  49        ENABLE_THREE_BYTE = 0x7,
  50        ENABLE_FOUR_BYTE = 0xF,
  51};
  52
  53#define SPEED_MASK      0x1
  54enum USB_SPEED{
  55        FULL_SPEED = 0x0,       /* 0: full speed */
  56        HIGH_SPEED = 0x1        /* 1: high speed */
  57};
  58
  59#define TS_MASK         0x6
  60enum TS_PORT{
  61        NO_TS_PORT = 0x0,       /* 2'b00: Neither port used. PCB not a Hybrid,
  62                                   only offers Analog TV or Video */
  63        TS1_PORT = 0x4,         /* 2'b10: TS1 Input (Hybrid mode :
  64                                Digital or External Analog/Compressed source) */
  65        TS1_TS2_PORT = 0x6,     /* 2'b11: TS1 & TS2 Inputs
  66                                (Dual inputs from Digital and/or
  67                                External Analog/Compressed sources) */
  68        TS1_EXT_CLOCK = 0x6,    /* 2'b11: TS1 & TS2 as selector
  69                                                to external clock */
  70        TS1VIP_TS2_PORT = 0x2   /* 2'b01: TS1 used as 656/VIP Output,
  71                                   TS2 Input (from Compressor) */
  72};
  73
  74#define EAVP_MASK       0x8
  75enum EAV_PRESENT{
  76        NO_EXTERNAL_AV = 0x0,   /* 0: No External A/V inputs
  77                                                (no need for i2s block),
  78                                                Analog Tuner must be present */
  79        EXTERNAL_AV = 0x8       /* 1: External A/V inputs
  80                                                present (requires i2s blk) */
  81};
  82
  83#define ATM_MASK        0x30
  84enum AT_MODE{
  85        DIF_TUNER = 0x30,       /* 2'b11: IF Tuner (requires use of DIF) */
  86        BASEBAND_SOUND = 0x20,  /* 2'b10: Baseband Composite &
  87                                                Sound-IF Signals present */
  88        NO_TUNER = 0x10         /* 2'b0x: No Analog Tuner present */
  89};
  90
  91#define PWR_SEL_MASK    0x40
  92enum POWE_TYPE{
  93        SELF_POWER = 0x0,       /* 0: self power */
  94        BUS_POWER = 0x40        /* 1: bus power */
  95};
  96
  97enum USB_POWE_TYPE{
  98        USB_SELF_POWER = 0,
  99        USB_BUS_POWER
 100};
 101
 102#define BO_0_MASK       0x80
 103enum AVDEC_STATUS{
 104        AVDEC_DISABLE = 0x0,    /* 0: A/V Decoder Disabled */
 105        AVDEC_ENABLE = 0x80     /* 1: A/V Decoder Enabled */
 106};
 107
 108#define BO_1_MASK       0x100
 109
 110#define BUSPOWER_MASK   0xC4    /* for Polaris spec 0.8 */
 111#define SELFPOWER_MASK  0x86
 112
 113/***************************************************************************/
 114#define NOT_DECIDE_YET  0xFE
 115#define NOT_SUPPORTED   0xFF
 116
 117/***************************************************************************
 118                                * for mod field use *
 119***************************************************************************/
 120#define MOD_DIGITAL     0x1
 121#define MOD_ANALOG      0x2
 122#define MOD_DIF         0x4
 123#define MOD_EXTERNAL    0x8
 124#define CAP_ALL_MOD     0x0f
 125
 126/***************************************************************************
 127                                * source define *
 128***************************************************************************/
 129#define SOURCE_DIGITAL          0x1
 130#define SOURCE_ANALOG           0x2
 131#define SOURCE_DIF              0x4
 132#define SOURCE_EXTERNAL         0x8
 133#define SOURCE_TS_BDA                   0x10
 134#define SOURCE_TS_ENCODE                0x20
 135#define SOURCE_TS_EXTERNAL      0x40
 136
 137/***************************************************************************
 138                                * interface information define *
 139***************************************************************************/
 140struct INTERFACE_INFO {
 141        u8 interrupt_index;
 142        u8 ts1_index;
 143        u8 ts2_index;
 144        u8 audio_index;
 145        u8 video_index;
 146        u8 vanc_index;          /* VBI */
 147        u8 hanc_index;          /* Sliced CC */
 148        u8 ir_index;
 149};
 150
 151enum INDEX_INTERFACE_INFO{
 152        INDEX_INTERRUPT = 0x0,
 153        INDEX_TS1,
 154        INDEX_TS2,
 155        INDEX_AUDIO,
 156        INDEX_VIDEO,
 157        INDEX_VANC,
 158        INDEX_HANC,
 159        INDEX_IR,
 160};
 161
 162/***************************************************************************
 163                                * configuration information define *
 164***************************************************************************/
 165struct CONFIG_INFO {
 166        u8 config_index;
 167        struct INTERFACE_INFO interface_info;
 168};
 169
 170struct pcb_config {
 171        u8 index;
 172        u8 type;                /* bus power or self power,
 173                                           self power--0, bus_power--1 */
 174        u8 speed;               /* usb speed, 2.0--1, 1.1--0 */
 175        u8 mode;                /* digital , anlog, dif or external A/V */
 176        u32 ts1_source;         /* three source -- BDA,External,encode */
 177        u32 ts2_source;
 178        u32 analog_source;
 179        u8 digital_index;       /* bus-power used */
 180        u8 analog_index;        /* bus-power used */
 181        u8 dif_index;           /* bus-power used */
 182        u8 external_index;      /* bus-power used */
 183        u8 config_num;          /* current config num, 0,1,2,
 184                                                   for self-power, always 0 */
 185        struct CONFIG_INFO hs_config_info[3];
 186        struct CONFIG_INFO fs_config_info[3];
 187};
 188
 189enum INDEX_PCB_CONFIG{
 190        INDEX_SELFPOWER_DIGITAL_ONLY = 0x0,
 191        INDEX_SELFPOWER_DUAL_DIGITAL,
 192        INDEX_SELFPOWER_ANALOG_ONLY,
 193        INDEX_SELFPOWER_DUAL,
 194        INDEX_SELFPOWER_TRIPLE,
 195        INDEX_SELFPOWER_COMPRESSOR,
 196        INDEX_BUSPOWER_DIGITAL_ONLY,
 197        INDEX_BUSPOWER_ANALOG_ONLY,
 198        INDEX_BUSPOWER_DIF_ONLY,
 199        INDEX_BUSPOWER_EXTERNAL_ONLY,
 200        INDEX_BUSPOWER_EXTERNAL_ANALOG,
 201        INDEX_BUSPOWER_EXTERNAL_DIF,
 202        INDEX_BUSPOWER_EXTERNAL_DIGITAL,
 203        INDEX_BUSPOWER_DIGITAL_ANALOG,
 204        INDEX_BUSPOWER_DIGITAL_DIF,
 205        INDEX_BUSPOWER_DIGITAL_ANALOG_EXTERNAL,
 206        INDEX_BUSPOWER_DIGITAL_DIF_EXTERNAL,
 207};
 208
 209/***************************************************************************/
 210struct cx231xx;
 211
 212int initialize_cx231xx(struct cx231xx *p_dev);
 213
 214#endif
 215