// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Copyright (C) 2017 Free Electrons
 * Copyright (C) 2017 NextThing Co
 *
 * Author: Boris Brezillon <boris.brezillon@free-electrons.com>
 */

#include <linux/sizes.h>
#include <linux/slab.h>

#include "internals.h"

#define NAND_HYNIX_CMD_SET_PARAMS       0x36
#define NAND_HYNIX_CMD_APPLY_PARAMS     0x16

#define NAND_HYNIX_1XNM_RR_REPEAT       8

/**
 * struct hynix_read_retry - read-retry data
 * @nregs: number of register to set when applying a new read-retry mode
 * @regs: register offsets (NAND chip dependent)
 * @values: array of values to set in registers. The array size is equal to
 *          (nregs * nmodes)
 */
struct hynix_read_retry {
        int nregs;
        const u8 *regs;
        u8 values[];
};

/**
 * struct hynix_nand - private Hynix NAND struct
 * @nand_technology: manufacturing process expressed in picometer
 * @read_retry: read-retry information
 */
struct hynix_nand {
        const struct hynix_read_retry *read_retry;
};

/**
 * struct hynix_read_retry_otp - structure describing how the read-retry OTP
 *                               area
 * @nregs: number of hynix private registers to set before reading the reading
 *         the OTP area
 * @regs: registers that should be configured
 * @values: values that should be set in regs
 * @page: the address to pass to the READ_PAGE command. Depends on the NAND
 *        chip
 * @size: size of the read-retry OTP section
 */
struct hynix_read_retry_otp {
        int nregs;
        const u8 *regs;
        const u8 *values;
        int page;
        int size;
};

static bool hynix_nand_has_valid_jedecid(struct nand_chip *chip)
{
        u8 jedecid[5] = { };
        int ret;

        ret = nand_readid_op(chip, 0x40, jedecid, sizeof(jedecid));
        if (ret)
                return false;

        return !strncmp("JEDEC", jedecid, sizeof(jedecid));
}

static int hynix_nand_cmd_op(struct nand_chip *chip, u8 cmd)
{
        if (nand_has_exec_op(chip)) {
                struct nand_op_instr instrs[] = {
                        NAND_OP_CMD(cmd, 0),
                };
                struct nand_operation op = NAND_OPERATION(chip->cur_cs, instrs);

                return nand_exec_op(chip, &op);
        }

        chip->legacy.cmdfunc(chip, cmd, -1, -1);

        return 0;
}

static int hynix_nand_reg_write_op(struct nand_chip *chip, u8 addr, u8 val)
{
        u16 column = ((u16)addr << 8) | addr;

        if (nand_has_exec_op(chip)) {
                struct nand_op_instr instrs[] = {
                        NAND_OP_ADDR(1, &addr, 0),
                        NAND_OP_8BIT_DATA_OUT(1, &val, 0),
                };
                struct nand_operation op = NAND_OPERATION(chip->cur_cs, instrs);

                return nand_exec_op(chip, &op);
        }

        chip->legacy.cmdfunc(chip, NAND_CMD_NONE, column, -1);
        chip->legacy.write_byte(chip, val);

        return 0;
}

static int hynix_nand_setup_read_retry(struct nand_chip *chip, int retry_mode)
{
        struct hynix_nand *hynix = nand_get_manufacturer_data(chip);
        const u8 *values;
        int i, ret;

        values = hynix->read_retry->values +
                 (retry_mode * hynix->read_retry->nregs);

        /* Enter 'Set Hynix Parameters' mode */
        ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_SET_PARAMS);
        if (ret)
                return ret;

        /*
         * Configure the NAND in the requested read-retry mode.
         * This is done by setting pre-defined values in internal NAND
         * registers.
         *
         * The set of registers is NAND specific, and the values are either
         * predefined or extracted from an OTP area on the NAND (values are
         * probably tweaked at production in this case).
         */
        for (i = 0; i < hynix->read_retry->nregs; i++) {
                ret = hynix_nand_reg_write_op(chip, hynix->read_retry->regs[i],
                                              values[i]);
                if (ret)
                        return ret;
        }

        /* Apply the new settings. */
        return hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_APPLY_PARAMS);
}

/**
 * hynix_get_majority - get the value that is occurring the most in a given
 *                      set of values
 * @in: the array of values to test
 * @repeat: the size of the in array
 * @out: pointer used to store the output value
 *
 * This function implements the 'majority check' logic that is supposed to
 * overcome the unreliability of MLC NANDs when reading the OTP area storing
 * the read-retry parameters.
 *
 * It's based on a pretty simple assumption: if we repeat the same value
 * several times and then take the one that is occurring the most, we should
 * find the correct value.
 * Let's hope this dummy algorithm prevents us from losing the read-retry
 * parameters.
 */
static int hynix_get_majority(const u8 *in, int repeat, u8 *out)
{
        int i, j, half = repeat / 2;

        /*
         * We only test the first half of the in array because we must ensure
         * that the value is at least occurring repeat / 2 times.
         *
         * This loop is suboptimal since we may count the occurrences of the
         * same value several time, but we are doing that on small sets, which
         * makes it acceptable.
         */
        for (i = 0; i < half; i++) {
                int cnt = 0;
                u8 val = in[i];

                /* Count all values that are matching the one at index i. */
                for (j = i + 1; j < repeat; j++) {
                        if (in[j] == val)
                                cnt++;
                }

                /* We found a value occurring more than repeat / 2. */
                if (cnt > half) {
                        *out = val;
                        return 0;
                }
        }

        return -EIO;
}

static int hynix_read_rr_otp(struct nand_chip *chip,
                             const struct hynix_read_retry_otp *info,
                             void *buf)
{
        int i, ret;

        ret = nand_reset_op(chip);
        if (ret)
                return ret;

        ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_SET_PARAMS);
        if (ret)
                return ret;

        for (i = 0; i < info->nregs; i++) {
                ret = hynix_nand_reg_write_op(chip, info->regs[i],
                                              info->values[i]);
                if (ret)
                        return ret;
        }

        ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_APPLY_PARAMS);
        if (ret)
                return ret;

        /* Sequence to enter OTP mode? */
        ret = hynix_nand_cmd_op(chip, 0x17);
        if (ret)
                return ret;

        ret = hynix_nand_cmd_op(chip, 0x4);
        if (ret)
                return ret;

        ret = hynix_nand_cmd_op(chip, 0x19);
        if (ret)
                return ret;

        /* Now read the page */
        ret = nand_read_page_op(chip, info->page, 0, buf, info->size);
        if (ret)
                return ret;

        /* Put everything back to normal */
        ret = nand_reset_op(chip);
        if (ret)
                return ret;

        ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_SET_PARAMS);
        if (ret)
                return ret;

        ret = hynix_nand_reg_write_op(chip, 0x38, 0);
        if (ret)
                return ret;

        ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_APPLY_PARAMS);
        if (ret)
                return ret;

        return nand_read_page_op(chip, 0, 0, NULL, 0);
}

#define NAND_HYNIX_1XNM_RR_COUNT_OFFS                           0
#define NAND_HYNIX_1XNM_RR_REG_COUNT_OFFS                       8
#define NAND_HYNIX_1XNM_RR_SET_OFFS(x, setsize, inv)            \
        (16 + ((((x) * 2) + ((inv) ? 1 : 0)) * (setsize)))

static int hynix_mlc_1xnm_rr_value(const u8 *buf, int nmodes, int nregs,
                                   int mode, int reg, bool inv, u8 *val)
{
        u8 tmp[NAND_HYNIX_1XNM_RR_REPEAT];
        int val_offs = (mode * nregs) + reg;
        int set_size = nmodes * nregs;
        int i, ret;

        for (i = 0; i < NAND_HYNIX_1XNM_RR_REPEAT; i++) {
                int set_offs = NAND_HYNIX_1XNM_RR_SET_OFFS(i, set_size, inv);

                tmp[i] = buf[val_offs + set_offs];
        }

        ret = hynix_get_majority(tmp, NAND_HYNIX_1XNM_RR_REPEAT, val);
        if (ret)
                return ret;

        if (inv)
                *val = ~*val;

        return 0;
}

static u8 hynix_1xnm_mlc_read_retry_regs[] = {
        0xcc, 0xbf, 0xaa, 0xab, 0xcd, 0xad, 0xae, 0xaf
};

static int hynix_mlc_1xnm_rr_init(struct nand_chip *chip,
                                  const struct hynix_read_retry_otp *info)
{
        struct hynix_nand *hynix = nand_get_manufacturer_data(chip);
        struct hynix_read_retry *rr = NULL;
        int ret, i, j;
        u8 nregs, nmodes;
        u8 *buf;

        buf = kmalloc(info->size, GFP_KERNEL);
        if (!buf)
                return -ENOMEM;

        ret = hynix_read_rr_otp(chip, info, buf);
        if (ret)
                goto out;

        ret = hynix_get_majority(buf, NAND_HYNIX_1XNM_RR_REPEAT,
                                 &nmodes);
        if (ret)
                goto out;

        ret = hynix_get_majority(buf + NAND_HYNIX_1XNM_RR_REPEAT,
                                 NAND_HYNIX_1XNM_RR_REPEAT,
                                 &nregs);
        if (ret)
                goto out;

        rr = kzalloc(sizeof(*rr) + (nregs * nmodes), GFP_KERNEL);
        if (!rr) {
                ret = -ENOMEM;
                goto out;
        }

        for (i = 0; i < nmodes; i++) {
                for (j = 0; j < nregs; j++) {
                        u8 *val = rr->values + (i * nregs);

                        ret = hynix_mlc_1xnm_rr_value(buf, nmodes, nregs, i, j,
                                                      false, val);
                        if (!ret)
                                continue;

                        ret = hynix_mlc_1xnm_rr_value(buf, nmodes, nregs, i, j,
                                                      true, val);
                        if (ret)
                                goto out;
                }
        }

        rr->nregs = nregs;
        rr->regs = hynix_1xnm_mlc_read_retry_regs;
        hynix->read_retry = rr;
        chip->ops.setup_read_retry = hynix_nand_setup_read_retry;
        chip->read_retries = nmodes;

out:
        kfree(buf);

        if (ret)
                kfree(rr);

        return ret;
}

static const u8 hynix_mlc_1xnm_rr_otp_regs[] = { 0x38 };
static const u8 hynix_mlc_1xnm_rr_otp_values[] = { 0x52 };

static const struct hynix_read_retry_otp hynix_mlc_1xnm_rr_otps[] = {
        {
                .nregs = ARRAY_SIZE(hynix_mlc_1xnm_rr_otp_regs),
                .regs = hynix_mlc_1xnm_rr_otp_regs,
                .values = hynix_mlc_1xnm_rr_otp_values,
                .page = 0x21f,
                .size = 784
        },
        {
                .nregs = ARRAY_SIZE(hynix_mlc_1xnm_rr_otp_regs),
                .regs = hynix_mlc_1xnm_rr_otp_regs,
                .values = hynix_mlc_1xnm_rr_otp_values,
                .page = 0x200,
                .size = 528,
        },
};

static int hynix_nand_rr_init(struct nand_chip *chip)
{
        int i, ret = 0;
        bool valid_jedecid;

        valid_jedecid = hynix_nand_has_valid_jedecid(chip);

        /*
         * We only support read-retry for 1xnm NANDs, and those NANDs all
         * expose a valid JEDEC ID.
         */
        if (valid_jedecid) {
                u8 nand_tech = chip->id.data[5] >> 4;

                /* 1xnm technology */
                if (nand_tech == 4) {
                        for (i = 0; i < ARRAY_SIZE(hynix_mlc_1xnm_rr_otps);
                             i++) {
                                /*
                                 * FIXME: Hynix recommend to copy the
                                 * read-retry OTP area into a normal page.
                                 */
                                ret = hynix_mlc_1xnm_rr_init(chip,
                                                hynix_mlc_1xnm_rr_otps);
                                if (!ret)
                                        break;
                        }
                }
        }

        if (ret)
                pr_warn("failed to initialize read-retry infrastructure");

        return 0;
}

static void hynix_nand_extract_oobsize(struct nand_chip *chip,
                                       bool valid_jedecid)
{
        struct mtd_info *mtd = nand_to_mtd(chip);
        struct nand_memory_organization *memorg;
        u8 oobsize;

        memorg = nanddev_get_memorg(&chip->base);

        oobsize = ((chip->id.data[3] >> 2) & 0x3) |
                  ((chip->id.data[3] >> 4) & 0x4);

        if (valid_jedecid) {
                switch (oobsize) {
                case 0:
                        memorg->oobsize = 2048;
                        break;
                case 1:
                        memorg->oobsize = 1664;
                        break;
                case 2:
                        memorg->oobsize = 1024;
                        break;
                case 3:
                        memorg->oobsize = 640;
                        break;
                default:
                        /*
                         * We should never reach this case, but if that
                         * happens, this probably means Hynix decided to use
                         * a different extended ID format, and we should find
                         * a way to support it.
                         */
                        WARN(1, "Invalid OOB size");
                        break;
                }
        } else {
                switch (oobsize) {
                case 0:
                        memorg->oobsize = 128;
                        break;
                case 1:
                        memorg->oobsize = 224;
                        break;
                case 2:
                        memorg->oobsize = 448;
                        break;
                case 3:
                        memorg->oobsize = 64;
                        break;
                case 4:
                        memorg->oobsize = 32;
                        break;
                case 5:
                        memorg->oobsize = 16;
                        break;
                case 6:
                        memorg->oobsize = 640;
                        break;
                default:
                        /*
                         * We should never reach this case, but if that
                         * happens, this probably means Hynix decided to use
                         * a different extended ID format, and we should find
                         * a way to support it.
                         */
                        WARN(1, "Invalid OOB size");
                        break;
                }

                /*
                 * The datasheet of H27UCG8T2BTR mentions that the "Redundant
                 * Area Size" is encoded "per 8KB" (page size). This chip uses
                 * a page size of 16KiB. The datasheet mentions an OOB size of
                 * 1.280 bytes, but the OOB size encoded in the ID bytes (using
                 * the existing logic above) is 640 bytes.
                 * Update the OOB size for this chip by taking the value
                 * determined above and scaling it to the actual page size (so
                 * the actual OOB size for this chip is: 640 * 16k / 8k).
                 */
                if (chip->id.data[1] == 0xde)
                        memorg->oobsize *= memorg->pagesize / SZ_8K;
        }

        mtd->oobsize = memorg->oobsize;
}

static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
                                                bool valid_jedecid)
{
        struct nand_device *base = &chip->base;
        struct nand_ecc_props requirements = {};
        u8 ecc_level = (chip->id.data[4] >> 4) & 0x7;

        if (valid_jedecid) {
                /* Reference: H27UCG8T2E datasheet */
                requirements.step_size = 1024;

                switch (ecc_level) {
                case 0:
                        requirements.step_size = 0;
                        requirements.strength = 0;
                        break;
                case 1:
                        requirements.strength = 4;
                        break;
                case 2:
                        requirements.strength = 24;
                        break;
                case 3:
                        requirements.strength = 32;
                        break;
                case 4:
                        requirements.strength = 40;
                        break;
                case 5:
                        requirements.strength = 50;
                        break;
                case 6:
                        requirements.strength = 60;
                        break;
                default:
                        /*
                         * We should never reach this case, but if that
                         * happens, this probably means Hynix decided to use
                         * a different extended ID format, and we should find
                         * a way to support it.
                         */
                        WARN(1, "Invalid ECC requirements");
                }
        } else {
                /*
                 * The ECC requirements field meaning depends on the
                 * NAND technology.
                 */
                u8 nand_tech = chip->id.data[5] & 0x7;

                if (nand_tech < 3) {
                        /* > 26nm, reference: H27UBG8T2A datasheet */
                        if (ecc_level < 5) {
                                requirements.step_size = 512;
                                requirements.strength = 1 << ecc_level;
                        } else if (ecc_level < 7) {
                                if (ecc_level == 5)
                                        requirements.step_size = 2048;
                                else
                                        requirements.step_size = 1024;
                                requirements.strength = 24;
                        } else {
                                /*
                                 * We should never reach this case, but if that
                                 * happens, this probably means Hynix decided
                                 * to use a different extended ID format, and
                                 * we should find a way to support it.
                                 */
                                WARN(1, "Invalid ECC requirements");
                        }
                } else {
                        /* <= 26nm, reference: H27UBG8T2B datasheet */
                        if (!ecc_level) {
                                requirements.step_size = 0;
                                requirements.strength = 0;
                        } else if (ecc_level < 5) {
                                requirements.step_size = 512;
                                requirements.strength = 1 << (ecc_level - 1);
                        } else {
                                requirements.step_size = 1024;
                                requirements.strength = 24 +
                                                        (8 * (ecc_level - 5));
                        }
                }
        }

        nanddev_set_ecc_requirements(base, &requirements);
}

static void hynix_nand_extract_scrambling_requirements(struct nand_chip *chip,
                                                       bool valid_jedecid)
{
        u8 nand_tech;

        /* We need scrambling on all TLC NANDs*/
        if (nanddev_bits_per_cell(&chip->base) > 2)
                chip->options |= NAND_NEED_SCRAMBLING;

        /* And on MLC NANDs with sub-3xnm process */
        if (valid_jedecid) {
                nand_tech = chip->id.data[5] >> 4;

                /* < 3xnm */
                if (nand_tech > 0)
                        chip->options |= NAND_NEED_SCRAMBLING;
        } else {
                nand_tech = chip->id.data[5] & 0x7;

                /* < 32nm */
                if (nand_tech > 2)
                        chip->options |= NAND_NEED_SCRAMBLING;
        }
}

static void hynix_nand_decode_id(struct nand_chip *chip)
{
        struct mtd_info *mtd = nand_to_mtd(chip);
        struct nand_memory_organization *memorg;
        bool valid_jedecid;
        u8 tmp;

        memorg = nanddev_get_memorg(&chip->base);

        /*
         * Exclude all SLC NANDs from this advanced detection scheme.
         * According to the ranges defined in several datasheets, it might
         * appear that even SLC NANDs could fall in this extended ID scheme.
         * If that the case rework the test to let SLC NANDs go through the
         * detection process.
         */
        if (chip->id.len < 6 || nand_is_slc(chip)) {
                nand_decode_ext_id(chip);
                return;
        }

        /* Extract pagesize */
        memorg->pagesize = 2048 << (chip->id.data[3] & 0x03);
        mtd->writesize = memorg->pagesize;

        tmp = (chip->id.data[3] >> 4) & 0x3;
        /*
         * When bit7 is set that means we start counting at 1MiB, otherwise
         * we start counting at 128KiB and shift this value the content of
         * ID[3][4:5].
         * The only exception is when ID[3][4:5] == 3 and ID[3][7] == 0, in
         * this case the erasesize is set to 768KiB.
         */
        if (chip->id.data[3] & 0x80) {
                memorg->pages_per_eraseblock = (SZ_1M << tmp) /
                                               memorg->pagesize;
                mtd->erasesize = SZ_1M << tmp;
        } else if (tmp == 3) {
                memorg->pages_per_eraseblock = (SZ_512K + SZ_256K) /
                                               memorg->pagesize;
                mtd->erasesize = SZ_512K + SZ_256K;
        } else {
                memorg->pages_per_eraseblock = (SZ_128K << tmp) /
                                               memorg->pagesize;
                mtd->erasesize = SZ_128K << tmp;
        }

        /*
         * Modern Toggle DDR NANDs have a valid JEDECID even though they are
         * not exposing a valid JEDEC parameter table.
         * These NANDs use a different NAND ID scheme.
         */
        valid_jedecid = hynix_nand_has_valid_jedecid(chip);

        hynix_nand_extract_oobsize(chip, valid_jedecid);
        hynix_nand_extract_ecc_requirements(chip, valid_jedecid);
        hynix_nand_extract_scrambling_requirements(chip, valid_jedecid);
}

static void hynix_nand_cleanup(struct nand_chip *chip)
{
        struct hynix_nand *hynix = nand_get_manufacturer_data(chip);

        if (!hynix)
                return;

        kfree(hynix->read_retry);
        kfree(hynix);
        nand_set_manufacturer_data(chip, NULL);
}

static int
h27ucg8t2atrbc_choose_interface_config(struct nand_chip *chip,
                                       struct nand_interface_config *iface)
{
        onfi_fill_interface_config(chip, iface, NAND_SDR_IFACE, 4);

        return nand_choose_best_sdr_timings(chip, iface, NULL);
}

static int hynix_nand_init(struct nand_chip *chip)
{
        struct hynix_nand *hynix;
        int ret;

        if (!nand_is_slc(chip))
                chip->options |= NAND_BBM_LASTPAGE;
        else
                chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;

        hynix = kzalloc(sizeof(*hynix), GFP_KERNEL);
        if (!hynix)
                return -ENOMEM;

        nand_set_manufacturer_data(chip, hynix);

        if (!strncmp("H27UCG8T2ATR-BC", chip->parameters.model,
                     sizeof("H27UCG8T2ATR-BC") - 1))
                chip->ops.choose_interface_config =
                        h27ucg8t2atrbc_choose_interface_config;

        ret = hynix_nand_rr_init(chip);
        if (ret)
                hynix_nand_cleanup(chip);

        return ret;
}

const struct nand_manufacturer_ops hynix_nand_manuf_ops = {
        .detect = hynix_nand_decode_id,
        .init = hynix_nand_init,
        .cleanup = hynix_nand_cleanup,
};