linux/drivers/power/supply/bd70528-charger.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2//
   3// Copyright (C) 2018 ROHM Semiconductors
   4//
   5// power-supply driver for ROHM BD70528 PMIC
   6
   7/*
   8 * BD70528 charger HW state machine.
   9 *
  10 * The thermal shutdown state is not drawn. From any other state but
  11 * battery error and suspend it is possible to go to TSD/TMP states
  12 * if temperature is out of bounds.
  13 *
  14 *  CHG_RST = H
  15 *  or CHG_EN=L
  16 *  or (DCIN2_UVLO=L && DCIN1_UVLO=L)
  17 *  or (DCIN2_OVLO=H & DCIN1_UVKLO=L)
  18 *
  19 *  +--------------+         +--------------+
  20 *  |              |         |              |
  21 *  |  Any state   +-------> |    Suspend   |
  22 *  |              |         |              |
  23 *  +--------------+         +------+-------+
  24 *                                  |
  25 *  CHG_EN = H && BAT_DET = H &&    |
  26 *  No errors (temp, bat_ov, UVLO,  |
  27 *  OVLO...)                        |
  28 *                                  |
  29 *  BAT_OV or             +---------v----------+
  30 *  (DBAT && TTRI)        |                    |
  31 *      +-----------------+   Trickle Charge   | <---------------+
  32 *      |                 |                    |                 |
  33 *      |                 +-------+------------+                 |
  34 *      |                         |                              |
  35 *      |                         |     ^                        |
  36 *      |        V_BAT > VTRI_TH  |     |  VBAT < VTRI_TH - 50mV |
  37 *      |                         |     |                        |
  38 *      |                         v     |                        |
  39 *      |                               |                        |
  40 *      |     BAT_OV or      +----------+----+                   |
  41 *      |     (DBAT && TFST) |               |                   |
  42 *      |   +----------------+  Fast Charge  |                   |
  43 *      |   |                |               |                   |
  44 *      v   v                +----+----------+                   |
  45 *                                |                              |
  46 *+----------------+   ILIM_DET=L |    ^ ILIM_DET                |
  47 *|                |   & CV_DET=H |    | or CV_DET=L             |
  48 *|  Battery Error |   & VBAT >   |    | or VBAT < VRECHG_TH     |
  49 *|                |   VRECHG_TH  |    | or IBAT  > IFST/x       |
  50 *+----------------+   & IBAT <   |    |                         |
  51 *                     IFST/x     v    |                         |
  52 *       ^                             |                         |
  53 *       |                   +---------+-+                       |
  54 *       |                   |           |                       |
  55 *       +-------------------+  Top OFF  |                       |
  56 *  BAT_OV = H or            |           |                       |
  57 *  (DBAT && TFST)           +-----+-----+                       |
  58 *                                 |                             |
  59 *           Stay top-off for 15s  |                             |
  60 *                                 v                             |
  61 *                                                               |
  62 *                            +--------+                         |
  63 *                            |        |                         |
  64 *                            |  Done  +-------------------------+
  65 *                            |        |
  66 *                            +--------+   VBAT < VRECHG_TH
  67 */
  68
  69#include <linux/kernel.h>
  70#include <linux/interrupt.h>
  71#include <linux/mfd/rohm-bd70528.h>
  72#include <linux/module.h>
  73#include <linux/platform_device.h>
  74#include <linux/power_supply.h>
  75#include <linux/linear_range.h>
  76
  77#define CHG_STAT_SUSPEND        0x0
  78#define CHG_STAT_TRICKLE        0x1
  79#define CHG_STAT_FAST           0x3
  80#define CHG_STAT_TOPOFF         0xe
  81#define CHG_STAT_DONE           0xf
  82#define CHG_STAT_OTP_TRICKLE    0x10
  83#define CHG_STAT_OTP_FAST       0x11
  84#define CHG_STAT_OTP_DONE       0x12
  85#define CHG_STAT_TSD_TRICKLE    0x20
  86#define CHG_STAT_TSD_FAST       0x21
  87#define CHG_STAT_TSD_TOPOFF     0x22
  88#define CHG_STAT_BAT_ERR        0x7f
  89
  90static const char *bd70528_charger_model = "BD70528";
  91static const char *bd70528_charger_manufacturer = "ROHM Semiconductors";
  92
  93#define BD_ERR_IRQ_HND(_name_, _wrn_)                                   \
  94static irqreturn_t bd0528_##_name_##_interrupt(int irq, void *arg)      \
  95{                                                                       \
  96        struct power_supply *psy = (struct power_supply *)arg;          \
  97                                                                        \
  98        power_supply_changed(psy);                                      \
  99        dev_err(&psy->dev, (_wrn_));                                    \
 100                                                                        \
 101        return IRQ_HANDLED;                                             \
 102}
 103
 104#define BD_INFO_IRQ_HND(_name_, _wrn_)                                  \
 105static irqreturn_t bd0528_##_name_##_interrupt(int irq, void *arg)      \
 106{                                                                       \
 107        struct power_supply *psy = (struct power_supply *)arg;          \
 108                                                                        \
 109        power_supply_changed(psy);                                      \
 110        dev_dbg(&psy->dev, (_wrn_));                                    \
 111                                                                        \
 112        return IRQ_HANDLED;                                             \
 113}
 114
 115#define BD_IRQ_HND(_name_) bd0528_##_name_##_interrupt
 116
 117struct bd70528_psy {
 118        struct regmap *regmap;
 119        struct device *dev;
 120        struct power_supply *psy;
 121};
 122
 123BD_ERR_IRQ_HND(BAT_OV_DET, "Battery overvoltage detected\n");
 124BD_ERR_IRQ_HND(DBAT_DET, "Dead battery detected\n");
 125BD_ERR_IRQ_HND(COLD_DET, "Battery cold\n");
 126BD_ERR_IRQ_HND(HOT_DET, "Battery hot\n");
 127BD_ERR_IRQ_HND(CHG_TSD, "Charger thermal shutdown\n");
 128BD_ERR_IRQ_HND(DCIN2_OV_DET, "DCIN2 overvoltage detected\n");
 129
 130BD_INFO_IRQ_HND(BAT_OV_RES, "Battery voltage back to normal\n");
 131BD_INFO_IRQ_HND(COLD_RES, "Battery temperature back to normal\n");
 132BD_INFO_IRQ_HND(HOT_RES, "Battery temperature back to normal\n");
 133BD_INFO_IRQ_HND(BAT_RMV, "Battery removed\n");
 134BD_INFO_IRQ_HND(BAT_DET, "Battery detected\n");
 135BD_INFO_IRQ_HND(DCIN2_OV_RES, "DCIN2 voltage back to normal\n");
 136BD_INFO_IRQ_HND(DCIN2_RMV, "DCIN2 removed\n");
 137BD_INFO_IRQ_HND(DCIN2_DET, "DCIN2 detected\n");
 138BD_INFO_IRQ_HND(DCIN1_RMV, "DCIN1 removed\n");
 139BD_INFO_IRQ_HND(DCIN1_DET, "DCIN1 detected\n");
 140
 141struct irq_name_pair {
 142        const char *n;
 143        irqreturn_t (*h)(int irq, void *arg);
 144};
 145
 146static int bd70528_get_irqs(struct platform_device *pdev,
 147                            struct bd70528_psy *bdpsy)
 148{
 149        int irq, i, ret;
 150        unsigned int mask;
 151        static const struct irq_name_pair bd70528_chg_irqs[] = {
 152                { .n = "bd70528-bat-ov-res", .h = BD_IRQ_HND(BAT_OV_RES) },
 153                { .n = "bd70528-bat-ov-det", .h = BD_IRQ_HND(BAT_OV_DET) },
 154                { .n = "bd70528-bat-dead", .h = BD_IRQ_HND(DBAT_DET) },
 155                { .n = "bd70528-bat-warmed", .h = BD_IRQ_HND(COLD_RES) },
 156                { .n = "bd70528-bat-cold", .h = BD_IRQ_HND(COLD_DET) },
 157                { .n = "bd70528-bat-cooled", .h = BD_IRQ_HND(HOT_RES) },
 158                { .n = "bd70528-bat-hot", .h = BD_IRQ_HND(HOT_DET) },
 159                { .n = "bd70528-chg-tshd", .h = BD_IRQ_HND(CHG_TSD) },
 160                { .n = "bd70528-bat-removed", .h = BD_IRQ_HND(BAT_RMV) },
 161                { .n = "bd70528-bat-detected", .h = BD_IRQ_HND(BAT_DET) },
 162                { .n = "bd70528-dcin2-ov-res", .h = BD_IRQ_HND(DCIN2_OV_RES) },
 163                { .n = "bd70528-dcin2-ov-det", .h = BD_IRQ_HND(DCIN2_OV_DET) },
 164                { .n = "bd70528-dcin2-removed", .h = BD_IRQ_HND(DCIN2_RMV) },
 165                { .n = "bd70528-dcin2-detected", .h = BD_IRQ_HND(DCIN2_DET) },
 166                { .n = "bd70528-dcin1-removed", .h = BD_IRQ_HND(DCIN1_RMV) },
 167                { .n = "bd70528-dcin1-detected", .h = BD_IRQ_HND(DCIN1_DET) },
 168        };
 169
 170        for (i = 0; i < ARRAY_SIZE(bd70528_chg_irqs); i++) {
 171                irq = platform_get_irq_byname(pdev, bd70528_chg_irqs[i].n);
 172                if (irq < 0) {
 173                        dev_err(&pdev->dev, "Bad IRQ information for %s (%d)\n",
 174                                bd70528_chg_irqs[i].n, irq);
 175                        return irq;
 176                }
 177                ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 178                                                bd70528_chg_irqs[i].h,
 179                                                IRQF_ONESHOT,
 180                                                bd70528_chg_irqs[i].n,
 181                                                bdpsy->psy);
 182
 183                if (ret)
 184                        return ret;
 185        }
 186        /*
 187         * BD70528 irq controller is not touching the main mask register.
 188         * So enable the charger block interrupts at main level. We can just
 189         * leave them enabled as irq-controller should disable irqs
 190         * from sub-registers when IRQ is disabled or freed.
 191         */
 192        mask = BD70528_REG_INT_BAT1_MASK | BD70528_REG_INT_BAT2_MASK;
 193        ret = regmap_update_bits(bdpsy->regmap,
 194                                 BD70528_REG_INT_MAIN_MASK, mask, 0);
 195        if (ret)
 196                dev_err(&pdev->dev, "Failed to enable charger IRQs\n");
 197
 198        return ret;
 199}
 200
 201static int bd70528_get_charger_status(struct bd70528_psy *bdpsy, int *val)
 202{
 203        int ret;
 204        unsigned int v;
 205
 206        ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_CURR_STAT, &v);
 207        if (ret) {
 208                dev_err(bdpsy->dev, "Charger state read failure %d\n",
 209                        ret);
 210                return ret;
 211        }
 212
 213        switch (v & BD70528_MASK_CHG_STAT) {
 214        case CHG_STAT_SUSPEND:
 215        /* Maybe we should check the CHG_TTRI_EN? */
 216        case CHG_STAT_OTP_TRICKLE:
 217        case CHG_STAT_OTP_FAST:
 218        case CHG_STAT_OTP_DONE:
 219        case CHG_STAT_TSD_TRICKLE:
 220        case CHG_STAT_TSD_FAST:
 221        case CHG_STAT_TSD_TOPOFF:
 222        case CHG_STAT_BAT_ERR:
 223                *val = POWER_SUPPLY_STATUS_NOT_CHARGING;
 224                break;
 225        case CHG_STAT_DONE:
 226                *val = POWER_SUPPLY_STATUS_FULL;
 227                break;
 228        case CHG_STAT_TRICKLE:
 229        case CHG_STAT_FAST:
 230        case CHG_STAT_TOPOFF:
 231                *val = POWER_SUPPLY_STATUS_CHARGING;
 232                break;
 233        default:
 234                *val = POWER_SUPPLY_STATUS_UNKNOWN;
 235                break;
 236        }
 237
 238        return 0;
 239}
 240
 241static int bd70528_get_charge_type(struct bd70528_psy *bdpsy, int *val)
 242{
 243        int ret;
 244        unsigned int v;
 245
 246        ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_CURR_STAT, &v);
 247        if (ret) {
 248                dev_err(bdpsy->dev, "Charger state read failure %d\n",
 249                        ret);
 250                return ret;
 251        }
 252
 253        switch (v & BD70528_MASK_CHG_STAT) {
 254        case CHG_STAT_TRICKLE:
 255                *val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
 256                break;
 257        case CHG_STAT_FAST:
 258        case CHG_STAT_TOPOFF:
 259                *val = POWER_SUPPLY_CHARGE_TYPE_FAST;
 260                break;
 261        case CHG_STAT_DONE:
 262        case CHG_STAT_SUSPEND:
 263        /* Maybe we should check the CHG_TTRI_EN? */
 264        case CHG_STAT_OTP_TRICKLE:
 265        case CHG_STAT_OTP_FAST:
 266        case CHG_STAT_OTP_DONE:
 267        case CHG_STAT_TSD_TRICKLE:
 268        case CHG_STAT_TSD_FAST:
 269        case CHG_STAT_TSD_TOPOFF:
 270        case CHG_STAT_BAT_ERR:
 271                *val = POWER_SUPPLY_CHARGE_TYPE_NONE;
 272                break;
 273        default:
 274                *val = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
 275                break;
 276        }
 277
 278        return 0;
 279}
 280
 281static int bd70528_get_battery_health(struct bd70528_psy *bdpsy, int *val)
 282{
 283        int ret;
 284        unsigned int v;
 285
 286        ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_BAT_STAT, &v);
 287        if (ret) {
 288                dev_err(bdpsy->dev, "Battery state read failure %d\n",
 289                        ret);
 290                return ret;
 291        }
 292        /* No battery? */
 293        if (!(v & BD70528_MASK_CHG_BAT_DETECT))
 294                *val = POWER_SUPPLY_HEALTH_DEAD;
 295        else if (v & BD70528_MASK_CHG_BAT_OVERVOLT)
 296                *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
 297        else if (v & BD70528_MASK_CHG_BAT_TIMER)
 298                *val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
 299        else
 300                *val = POWER_SUPPLY_HEALTH_GOOD;
 301
 302        return 0;
 303}
 304
 305static int bd70528_get_online(struct bd70528_psy *bdpsy, int *val)
 306{
 307        int ret;
 308        unsigned int v;
 309
 310        ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_IN_STAT, &v);
 311        if (ret) {
 312                dev_err(bdpsy->dev, "DC1 IN state read failure %d\n",
 313                        ret);
 314                return ret;
 315        }
 316
 317        *val = (v & BD70528_MASK_CHG_DCIN1_UVLO) ? 1 : 0;
 318
 319        return 0;
 320}
 321
 322static int bd70528_get_present(struct bd70528_psy *bdpsy, int *val)
 323{
 324        int ret;
 325        unsigned int v;
 326
 327        ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_BAT_STAT, &v);
 328        if (ret) {
 329                dev_err(bdpsy->dev, "Battery state read failure %d\n",
 330                        ret);
 331                return ret;
 332        }
 333
 334        *val = (v & BD70528_MASK_CHG_BAT_DETECT) ? 1 : 0;
 335
 336        return 0;
 337}
 338
 339static const struct linear_range current_limit_ranges[] = {
 340        {
 341                .min = 5,
 342                .step = 1,
 343                .min_sel = 0,
 344                .max_sel = 0x22,
 345        },
 346        {
 347                .min = 40,
 348                .step = 5,
 349                .min_sel = 0x23,
 350                .max_sel = 0x26,
 351        },
 352        {
 353                .min = 60,
 354                .step = 20,
 355                .min_sel = 0x27,
 356                .max_sel = 0x2d,
 357        },
 358        {
 359                .min = 200,
 360                .step = 50,
 361                .min_sel = 0x2e,
 362                .max_sel = 0x34,
 363        },
 364        {
 365                .min = 500,
 366                .step = 0,
 367                .min_sel = 0x35,
 368                .max_sel = 0x3f,
 369        },
 370};
 371
 372/*
 373 * BD70528 would support setting and getting own charge current/
 374 * voltage for low temperatures. The driver currently only reads
 375 * the charge current at room temperature. We do set both though.
 376 */
 377static const struct linear_range warm_charge_curr[] = {
 378        {
 379                .min = 10,
 380                .step = 10,
 381                .min_sel = 0,
 382                .max_sel = 0x12,
 383        },
 384        {
 385                .min = 200,
 386                .step = 25,
 387                .min_sel = 0x13,
 388                .max_sel = 0x1f,
 389        },
 390};
 391
 392/*
 393 * Cold charge current selectors are identical to warm charge current
 394 * selectors. The difference is that only smaller currents are available
 395 * at cold charge range.
 396 */
 397#define MAX_COLD_CHG_CURR_SEL 0x15
 398#define MAX_WARM_CHG_CURR_SEL 0x1f
 399#define MIN_CHG_CURR_SEL 0x0
 400
 401static int get_charge_current(struct bd70528_psy *bdpsy, int *ma)
 402{
 403        unsigned int sel;
 404        int ret;
 405
 406        ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_CHG_CURR_WARM,
 407                          &sel);
 408        if (ret) {
 409                dev_err(bdpsy->dev,
 410                        "Charge current reading failed (%d)\n", ret);
 411                return ret;
 412        }
 413
 414        sel &= BD70528_MASK_CHG_CHG_CURR;
 415
 416        ret = linear_range_get_value_array(&warm_charge_curr[0],
 417                                           ARRAY_SIZE(warm_charge_curr),
 418                                           sel, ma);
 419        if (ret) {
 420                dev_err(bdpsy->dev,
 421                        "Unknown charge current value 0x%x\n",
 422                        sel);
 423        }
 424
 425        return ret;
 426}
 427
 428static int get_current_limit(struct bd70528_psy *bdpsy, int *ma)
 429{
 430        unsigned int sel;
 431        int ret;
 432
 433        ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_DCIN_ILIM,
 434                          &sel);
 435
 436        if (ret) {
 437                dev_err(bdpsy->dev,
 438                        "Input current limit reading failed (%d)\n", ret);
 439                return ret;
 440        }
 441
 442        sel &= BD70528_MASK_CHG_DCIN_ILIM;
 443
 444        ret = linear_range_get_value_array(&current_limit_ranges[0],
 445                                           ARRAY_SIZE(current_limit_ranges),
 446                                           sel, ma);
 447        if (ret) {
 448                /* Unspecified values mean 500 mA */
 449                *ma = 500;
 450        }
 451        return 0;
 452}
 453
 454static enum power_supply_property bd70528_charger_props[] = {
 455        POWER_SUPPLY_PROP_STATUS,
 456        POWER_SUPPLY_PROP_CHARGE_TYPE,
 457        POWER_SUPPLY_PROP_HEALTH,
 458        POWER_SUPPLY_PROP_PRESENT,
 459        POWER_SUPPLY_PROP_ONLINE,
 460        POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
 461        POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
 462        POWER_SUPPLY_PROP_MODEL_NAME,
 463        POWER_SUPPLY_PROP_MANUFACTURER,
 464};
 465
 466static int bd70528_charger_get_property(struct power_supply *psy,
 467                                        enum power_supply_property psp,
 468                                        union power_supply_propval *val)
 469{
 470        struct bd70528_psy *bdpsy = power_supply_get_drvdata(psy);
 471        int ret = 0;
 472
 473        switch (psp) {
 474        case POWER_SUPPLY_PROP_STATUS:
 475                return bd70528_get_charger_status(bdpsy, &val->intval);
 476        case POWER_SUPPLY_PROP_CHARGE_TYPE:
 477                return bd70528_get_charge_type(bdpsy, &val->intval);
 478        case POWER_SUPPLY_PROP_HEALTH:
 479                return bd70528_get_battery_health(bdpsy, &val->intval);
 480        case POWER_SUPPLY_PROP_PRESENT:
 481                return bd70528_get_present(bdpsy, &val->intval);
 482        case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
 483                ret = get_current_limit(bdpsy, &val->intval);
 484                val->intval *= 1000;
 485                return ret;
 486        case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
 487                ret = get_charge_current(bdpsy, &val->intval);
 488                val->intval *= 1000;
 489                return ret;
 490        case POWER_SUPPLY_PROP_ONLINE:
 491                return bd70528_get_online(bdpsy, &val->intval);
 492        case POWER_SUPPLY_PROP_MODEL_NAME:
 493                val->strval = bd70528_charger_model;
 494                return 0;
 495        case POWER_SUPPLY_PROP_MANUFACTURER:
 496                val->strval = bd70528_charger_manufacturer;
 497                return 0;
 498        default:
 499                break;
 500        }
 501
 502        return -EINVAL;
 503}
 504
 505static int bd70528_prop_is_writable(struct power_supply *psy,
 506                                    enum power_supply_property psp)
 507{
 508        switch (psp) {
 509        case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
 510        case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
 511                return 1;
 512        default:
 513                break;
 514        }
 515        return 0;
 516}
 517
 518static int set_charge_current(struct bd70528_psy *bdpsy, int ma)
 519{
 520        unsigned int reg;
 521        int ret = 0, tmpret;
 522        bool found;
 523
 524        if (ma > 500) {
 525                dev_warn(bdpsy->dev,
 526                         "Requested charge current %u exceed maximum (500mA)\n",
 527                         ma);
 528                reg = MAX_WARM_CHG_CURR_SEL;
 529                goto set;
 530        }
 531        if (ma < 10) {
 532                dev_err(bdpsy->dev,
 533                        "Requested charge current %u smaller than min (10mA)\n",
 534                         ma);
 535                reg = MIN_CHG_CURR_SEL;
 536                ret = -EINVAL;
 537                goto set;
 538        }
 539
 540/*
 541 * For BD70528 voltage/current limits we happily accept any value which
 542 * belongs the range. We could check if value matching the selector is
 543 * desired by computing the range min + (sel - sel_low) * range step - but
 544 * I guess it is enough if we use voltage/current which is closest (below)
 545 * the requested?
 546 */
 547
 548        ret = linear_range_get_selector_low_array(warm_charge_curr,
 549                                                  ARRAY_SIZE(warm_charge_curr),
 550                                                  ma, &reg, &found);
 551        if (ret) {
 552                dev_err(bdpsy->dev,
 553                         "Unsupported charge current %u mA\n", ma);
 554                reg = MIN_CHG_CURR_SEL;
 555                goto set;
 556        }
 557        if (!found) {
 558                /*
 559                 * There was a gap in supported values and we hit it.
 560                 * Yet a smaller value was found so we use it.
 561                 */
 562                dev_warn(bdpsy->dev,
 563                         "Unsupported charge current %u mA\n", ma);
 564        }
 565set:
 566
 567        tmpret = regmap_update_bits(bdpsy->regmap,
 568                                    BD70528_REG_CHG_CHG_CURR_WARM,
 569                                    BD70528_MASK_CHG_CHG_CURR, reg);
 570        if (tmpret)
 571                dev_err(bdpsy->dev,
 572                        "Charge current write failure (%d)\n", tmpret);
 573
 574        if (reg > MAX_COLD_CHG_CURR_SEL)
 575                reg = MAX_COLD_CHG_CURR_SEL;
 576
 577        if (!tmpret)
 578                tmpret = regmap_update_bits(bdpsy->regmap,
 579                                            BD70528_REG_CHG_CHG_CURR_COLD,
 580                                            BD70528_MASK_CHG_CHG_CURR, reg);
 581
 582        if (!ret)
 583                ret = tmpret;
 584
 585        return ret;
 586}
 587
 588#define MAX_CURR_LIMIT_SEL 0x34
 589#define MIN_CURR_LIMIT_SEL 0x0
 590
 591static int set_current_limit(struct bd70528_psy *bdpsy, int ma)
 592{
 593        unsigned int reg;
 594        int ret = 0, tmpret;
 595        bool found;
 596
 597        if (ma > 500) {
 598                dev_warn(bdpsy->dev,
 599                         "Requested current limit %u exceed maximum (500mA)\n",
 600                         ma);
 601                reg = MAX_CURR_LIMIT_SEL;
 602                goto set;
 603        }
 604        if (ma < 5) {
 605                dev_err(bdpsy->dev,
 606                        "Requested current limit %u smaller than min (5mA)\n",
 607                        ma);
 608                reg = MIN_CURR_LIMIT_SEL;
 609                ret = -EINVAL;
 610                goto set;
 611        }
 612
 613        ret = linear_range_get_selector_low_array(current_limit_ranges,
 614                                        ARRAY_SIZE(current_limit_ranges),
 615                                        ma, &reg, &found);
 616        if (ret) {
 617                dev_err(bdpsy->dev, "Unsupported current limit %umA\n", ma);
 618                reg = MIN_CURR_LIMIT_SEL;
 619                goto set;
 620        }
 621        if (!found) {
 622                /*
 623                 * There was a gap in supported values and we hit it.
 624                 * We found a smaller value from ranges and use it.
 625                 * Warn user though.
 626                 */
 627                dev_warn(bdpsy->dev, "Unsupported current limit %umA\n", ma);
 628        }
 629
 630set:
 631        tmpret = regmap_update_bits(bdpsy->regmap,
 632                                    BD70528_REG_CHG_DCIN_ILIM,
 633                                    BD70528_MASK_CHG_DCIN_ILIM, reg);
 634
 635        if (!ret)
 636                ret = tmpret;
 637
 638        return ret;
 639}
 640
 641static int bd70528_charger_set_property(struct power_supply *psy,
 642                                        enum power_supply_property psp,
 643                                        const union power_supply_propval *val)
 644{
 645        struct bd70528_psy *bdpsy = power_supply_get_drvdata(psy);
 646
 647        switch (psp) {
 648        case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
 649                return set_current_limit(bdpsy, val->intval / 1000);
 650        case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
 651                return set_charge_current(bdpsy, val->intval / 1000);
 652        default:
 653                break;
 654        }
 655        return -EINVAL;
 656}
 657
 658static const struct power_supply_desc bd70528_charger_desc = {
 659        .name           = "bd70528-charger",
 660        .type           = POWER_SUPPLY_TYPE_MAINS,
 661        .properties     = bd70528_charger_props,
 662        .num_properties = ARRAY_SIZE(bd70528_charger_props),
 663        .get_property   = bd70528_charger_get_property,
 664        .set_property   = bd70528_charger_set_property,
 665        .property_is_writeable  = bd70528_prop_is_writable,
 666};
 667
 668static int bd70528_power_probe(struct platform_device *pdev)
 669{
 670        struct bd70528_psy *bdpsy;
 671        struct power_supply_config cfg = {};
 672
 673        bdpsy = devm_kzalloc(&pdev->dev, sizeof(*bdpsy), GFP_KERNEL);
 674        if (!bdpsy)
 675                return -ENOMEM;
 676
 677        bdpsy->regmap = dev_get_regmap(pdev->dev.parent, NULL);
 678        if (!bdpsy->regmap) {
 679                dev_err(&pdev->dev, "No regmap found for chip\n");
 680                return -EINVAL;
 681        }
 682        bdpsy->dev = &pdev->dev;
 683
 684        platform_set_drvdata(pdev, bdpsy);
 685        cfg.drv_data = bdpsy;
 686        cfg.of_node = pdev->dev.parent->of_node;
 687
 688        bdpsy->psy = devm_power_supply_register(&pdev->dev,
 689                                                &bd70528_charger_desc, &cfg);
 690        if (IS_ERR(bdpsy->psy)) {
 691                dev_err(&pdev->dev, "failed: power supply register\n");
 692                return PTR_ERR(bdpsy->psy);
 693        }
 694
 695        return bd70528_get_irqs(pdev, bdpsy);
 696}
 697
 698static struct platform_driver bd70528_power = {
 699        .driver = {
 700                .name = "bd70528-power"
 701        },
 702        .probe = bd70528_power_probe,
 703};
 704
 705module_platform_driver(bd70528_power);
 706
 707MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
 708MODULE_DESCRIPTION("BD70528 power-supply driver");
 709MODULE_LICENSE("GPL");
 710MODULE_ALIAS("platform:bd70528-power");
 711