1/******************************************************************* 2 * This file is part of the Emulex Linux Device Driver for * 3 * Fibre Channel Host Bus Adapters. * 4 * Copyright (C) 2017-2019 Broadcom. All Rights Reserved. The term * 5 * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * 6 * Copyright (C) 2010-2015 Emulex. All rights reserved. * 7 * EMULEX and SLI are trademarks of Emulex. * 8 * www.broadcom.com * 9 * * 10 * This program is free software; you can redistribute it and/or * 11 * modify it under the terms of version 2 of the GNU General * 12 * Public License as published by the Free Software Foundation. * 13 * This program is distributed in the hope that it will be useful. * 14 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * 15 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * 16 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * 17 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * 18 * TO BE LEGALLY INVALID. See the GNU General Public License for * 19 * more details, a copy of which can be found in the file COPYING * 20 * included with this package. * 21 *******************************************************************/ 22/* bsg definitions 23 * No pointers to user data are allowed, all application buffers and sizes will 24 * derived through the bsg interface. 25 * 26 * These are the vendor unique structures passed in using the bsg 27 * FC_BSG_HST_VENDOR message code type. 28 */ 29#define LPFC_BSG_VENDOR_SET_CT_EVENT 1 30#define LPFC_BSG_VENDOR_GET_CT_EVENT 2 31#define LPFC_BSG_VENDOR_SEND_MGMT_RESP 3 32#define LPFC_BSG_VENDOR_DIAG_MODE 4 33#define LPFC_BSG_VENDOR_DIAG_RUN_LOOPBACK 5 34#define LPFC_BSG_VENDOR_GET_MGMT_REV 6 35#define LPFC_BSG_VENDOR_MBOX 7 36#define LPFC_BSG_VENDOR_MENLO_CMD 8 37#define LPFC_BSG_VENDOR_MENLO_DATA 9 38#define LPFC_BSG_VENDOR_DIAG_MODE_END 10 39#define LPFC_BSG_VENDOR_LINK_DIAG_TEST 11 40#define LPFC_BSG_VENDOR_FORCED_LINK_SPEED 14 41#define LPFC_BSG_VENDOR_RAS_GET_LWPD 16 42#define LPFC_BSG_VENDOR_RAS_GET_FWLOG 17 43#define LPFC_BSG_VENDOR_RAS_GET_CONFIG 18 44#define LPFC_BSG_VENDOR_RAS_SET_CONFIG 19 45#define LPFC_BSG_VENDOR_GET_TRUNK_INFO 20 46 47struct set_ct_event { 48 uint32_t command; 49 uint32_t type_mask; 50 uint32_t ev_req_id; 51 uint32_t ev_reg_id; 52}; 53 54struct get_ct_event { 55 uint32_t command; 56 uint32_t ev_reg_id; 57 uint32_t ev_req_id; 58}; 59 60struct get_ct_event_reply { 61 uint32_t immed_data; 62 uint32_t type; 63}; 64 65struct send_mgmt_resp { 66 uint32_t command; 67 uint32_t tag; 68}; 69 70 71#define DISABLE_LOOP_BACK 0x0 /* disables loop back */ 72#define INTERNAL_LOOP_BACK 0x1 /* adapter short cuts the loop internally */ 73#define EXTERNAL_LOOP_BACK 0x2 /* requires an external loopback plug */ 74 75struct diag_mode_set { 76 uint32_t command; 77 uint32_t type; 78 uint32_t timeout; 79 uint32_t physical_link; 80}; 81 82struct sli4_link_diag { 83 uint32_t command; 84 uint32_t timeout; 85 uint32_t test_id; 86 uint32_t loops; 87 uint32_t test_version; 88 uint32_t error_action; 89}; 90 91struct diag_mode_test { 92 uint32_t command; 93}; 94 95struct diag_status { 96 uint32_t mbox_status; 97 uint32_t shdr_status; 98 uint32_t shdr_add_status; 99}; 100 101#define LPFC_WWNN_TYPE 0 102#define LPFC_WWPN_TYPE 1 103 104struct get_mgmt_rev { 105 uint32_t command; 106}; 107 108#define MANAGEMENT_MAJOR_REV 1 109#define MANAGEMENT_MINOR_REV 1 110 111/* the MgmtRevInfo structure */ 112struct MgmtRevInfo { 113 uint32_t a_Major; 114 uint32_t a_Minor; 115}; 116 117struct get_mgmt_rev_reply { 118 struct MgmtRevInfo info; 119}; 120 121#define BSG_MBOX_SIZE 4096 /* mailbox command plus extended data */ 122 123/* BSG mailbox request header */ 124struct dfc_mbox_req { 125 uint32_t command; 126 uint32_t mbOffset; 127 uint32_t inExtWLen; 128 uint32_t outExtWLen; 129 uint32_t extMboxTag; 130 uint32_t extSeqNum; 131}; 132 133/* Used for menlo command or menlo data. The xri is only used for menlo data */ 134struct menlo_command { 135 uint32_t cmd; 136 uint32_t xri; 137}; 138 139struct menlo_response { 140 uint32_t xri; /* return the xri of the iocb exchange */ 141}; 142 143/* 144 * macros and data structures for handling sli-config mailbox command 145 * pass-through support, this header file is shared between user and 146 * kernel spaces, note the set of macros are duplicates from lpfc_hw4.h, 147 * with macro names prefixed with bsg_, as the macros defined in 148 * lpfc_hw4.h are not accessible from user space. 149 */ 150 151/* Macros to deal with bit fields. Each bit field must have 3 #defines 152 * associated with it (_SHIFT, _MASK, and _WORD). 153 * EG. For a bit field that is in the 7th bit of the "field4" field of a 154 * structure and is 2 bits in size the following #defines must exist: 155 * struct temp { 156 * uint32_t field1; 157 * uint32_t field2; 158 * uint32_t field3; 159 * uint32_t field4; 160 * #define example_bit_field_SHIFT 7 161 * #define example_bit_field_MASK 0x03 162 * #define example_bit_field_WORD field4 163 * uint32_t field5; 164 * }; 165 * Then the macros below may be used to get or set the value of that field. 166 * EG. To get the value of the bit field from the above example: 167 * struct temp t1; 168 * value = bsg_bf_get(example_bit_field, &t1); 169 * And then to set that bit field: 170 * bsg_bf_set(example_bit_field, &t1, 2); 171 * Or clear that bit field: 172 * bsg_bf_set(example_bit_field, &t1, 0); 173 */ 174#define bsg_bf_get_le32(name, ptr) \ 175 ((le32_to_cpu((ptr)->name##_WORD) >> name##_SHIFT) & name##_MASK) 176#define bsg_bf_get(name, ptr) \ 177 (((ptr)->name##_WORD >> name##_SHIFT) & name##_MASK) 178#define bsg_bf_set_le32(name, ptr, value) \ 179 ((ptr)->name##_WORD = cpu_to_le32(((((value) & \ 180 name##_MASK) << name##_SHIFT) | (le32_to_cpu((ptr)->name##_WORD) & \ 181 ~(name##_MASK << name##_SHIFT))))) 182#define bsg_bf_set(name, ptr, value) \ 183 ((ptr)->name##_WORD = ((((value) & name##_MASK) << name##_SHIFT) | \ 184 ((ptr)->name##_WORD & ~(name##_MASK << name##_SHIFT)))) 185 186/* 187 * The sli_config structure specified here is based on the following 188 * restriction: 189 * 190 * -- SLI_CONFIG EMB=0, carrying MSEs, will carry subcommands without 191 * carrying HBD. 192 * -- SLI_CONFIG EMB=1, not carrying MSE, will carry subcommands with or 193 * without carrying HBDs. 194 */ 195 196struct lpfc_sli_config_mse { 197 uint32_t pa_lo; 198 uint32_t pa_hi; 199 uint32_t buf_len; 200#define lpfc_mbox_sli_config_mse_len_SHIFT 0 201#define lpfc_mbox_sli_config_mse_len_MASK 0xffffff 202#define lpfc_mbox_sli_config_mse_len_WORD buf_len 203}; 204 205struct lpfc_sli_config_hbd { 206 uint32_t buf_len; 207#define lpfc_mbox_sli_config_ecmn_hbd_len_SHIFT 0 208#define lpfc_mbox_sli_config_ecmn_hbd_len_MASK 0xffffff 209#define lpfc_mbox_sli_config_ecmn_hbd_len_WORD buf_len 210 uint32_t pa_lo; 211 uint32_t pa_hi; 212}; 213 214struct lpfc_sli_config_hdr { 215 uint32_t word1; 216#define lpfc_mbox_hdr_emb_SHIFT 0 217#define lpfc_mbox_hdr_emb_MASK 0x00000001 218#define lpfc_mbox_hdr_emb_WORD word1 219#define lpfc_mbox_hdr_mse_cnt_SHIFT 3 220#define lpfc_mbox_hdr_mse_cnt_MASK 0x0000001f 221#define lpfc_mbox_hdr_mse_cnt_WORD word1 222 uint32_t payload_length; 223 uint32_t tag_lo; 224 uint32_t tag_hi; 225 uint32_t reserved5; 226}; 227 228#define LPFC_CSF_BOOT_DEV 0x1D 229#define LPFC_CSF_QUERY 0 230#define LPFC_CSF_SAVE 1 231 232struct lpfc_sli_config_emb0_subsys { 233 struct lpfc_sli_config_hdr sli_config_hdr; 234#define LPFC_MBX_SLI_CONFIG_MAX_MSE 19 235 struct lpfc_sli_config_mse mse[LPFC_MBX_SLI_CONFIG_MAX_MSE]; 236 uint32_t padding; 237 uint32_t word64; 238#define lpfc_emb0_subcmnd_opcode_SHIFT 0 239#define lpfc_emb0_subcmnd_opcode_MASK 0xff 240#define lpfc_emb0_subcmnd_opcode_WORD word64 241#define lpfc_emb0_subcmnd_subsys_SHIFT 8 242#define lpfc_emb0_subcmnd_subsys_MASK 0xff 243#define lpfc_emb0_subcmnd_subsys_WORD word64 244/* Subsystem FCOE (0x0C) OpCodes */ 245#define SLI_CONFIG_SUBSYS_FCOE 0x0C 246#define FCOE_OPCODE_READ_FCF 0x08 247#define FCOE_OPCODE_ADD_FCF 0x09 248#define FCOE_OPCODE_SET_DPORT_MODE 0x27 249#define FCOE_OPCODE_GET_DPORT_RESULTS 0x28 250 uint32_t timeout; /* comn_set_feature timeout */ 251 uint32_t request_length; /* comn_set_feature request len */ 252 uint32_t version; /* comn_set_feature version */ 253 uint32_t csf_feature; /* comn_set_feature feature */ 254 uint32_t word69; /* comn_set_feature parameter len */ 255 uint32_t word70; /* comn_set_feature parameter val0 */ 256#define lpfc_emb0_subcmnd_csf_p0_SHIFT 0 257#define lpfc_emb0_subcmnd_csf_p0_MASK 0x3 258#define lpfc_emb0_subcmnd_csf_p0_WORD word70 259}; 260 261struct lpfc_sli_config_emb1_subsys { 262 struct lpfc_sli_config_hdr sli_config_hdr; 263 uint32_t word6; 264#define lpfc_emb1_subcmnd_opcode_SHIFT 0 265#define lpfc_emb1_subcmnd_opcode_MASK 0xff 266#define lpfc_emb1_subcmnd_opcode_WORD word6 267#define lpfc_emb1_subcmnd_subsys_SHIFT 8 268#define lpfc_emb1_subcmnd_subsys_MASK 0xff 269#define lpfc_emb1_subcmnd_subsys_WORD word6 270/* Subsystem COMN (0x01) OpCodes */ 271#define SLI_CONFIG_SUBSYS_COMN 0x01 272#define COMN_OPCODE_GET_PROFILE_CONFIG 0xA4 273#define COMN_OPCODE_READ_OBJECT 0xAB 274#define COMN_OPCODE_WRITE_OBJECT 0xAC 275#define COMN_OPCODE_READ_OBJECT_LIST 0xAD 276#define COMN_OPCODE_DELETE_OBJECT 0xAE 277#define COMN_OPCODE_SET_FEATURES 0xBF 278#define COMN_OPCODE_GET_CNTL_ADDL_ATTRIBUTES 0x79 279#define COMN_OPCODE_GET_CNTL_ATTRIBUTES 0x20 280 uint32_t timeout; 281 uint32_t request_length; 282 uint32_t word9; 283#define lpfc_subcmnd_version_SHIFT 0 284#define lpfc_subcmnd_version_MASK 0xff 285#define lpfc_subcmnd_version_WORD word9 286 uint32_t word10; 287#define lpfc_subcmnd_ask_rd_len_SHIFT 0 288#define lpfc_subcmnd_ask_rd_len_MASK 0xffffff 289#define lpfc_subcmnd_ask_rd_len_WORD word10 290 uint32_t rd_offset; 291 uint32_t obj_name[26]; 292 uint32_t hbd_count; 293#define LPFC_MBX_SLI_CONFIG_MAX_HBD 8 294 struct lpfc_sli_config_hbd hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD]; 295}; 296 297struct lpfc_sli_config_mbox { 298 uint32_t word0; 299#define lpfc_mqe_status_SHIFT 16 300#define lpfc_mqe_status_MASK 0x0000FFFF 301#define lpfc_mqe_status_WORD word0 302#define lpfc_mqe_command_SHIFT 8 303#define lpfc_mqe_command_MASK 0x000000FF 304#define lpfc_mqe_command_WORD word0 305 union { 306 struct lpfc_sli_config_emb0_subsys sli_config_emb0_subsys; 307 struct lpfc_sli_config_emb1_subsys sli_config_emb1_subsys; 308 } un; 309}; 310 311#define LPFC_FORCED_LINK_SPEED_NOT_SUPPORTED 0 312#define LPFC_FORCED_LINK_SPEED_SUPPORTED 1 313struct get_forced_link_speed_support { 314 uint32_t command; 315}; 316struct forced_link_speed_support_reply { 317 uint8_t supported; 318}; 319 320struct lpfc_bsg_ras_req { 321 uint32_t command; 322}; 323 324struct lpfc_bsg_get_fwlog_req { 325 uint32_t command; 326 uint32_t read_size; 327 uint32_t read_offset; 328}; 329 330struct lpfc_bsg_get_ras_lwpd { 331 uint32_t offset; 332 uint32_t wrap_count; 333}; 334 335struct lpfc_bsg_set_ras_config_req { 336 uint32_t command; 337 uint8_t action; 338#define LPFC_RASACTION_STOP_LOGGING 0x00 339#define LPFC_RASACTION_START_LOGGING 0x01 340 uint8_t log_level; 341}; 342 343struct lpfc_bsg_get_ras_config_reply { 344 uint8_t state; 345#define LPFC_RASLOG_STATE_STOPPED 0x00 346#define LPFC_RASLOG_STATE_RUNNING 0x01 347 uint8_t log_level; 348 uint32_t log_buff_sz; 349}; 350 351struct lpfc_trunk_info { 352 uint32_t word0; 353#define lpfc_trunk_info_link_status_SHIFT 0 354#define lpfc_trunk_info_link_status_MASK 1 355#define lpfc_trunk_info_link_status_WORD word0 356#define lpfc_trunk_info_trunk_active0_SHIFT 8 357#define lpfc_trunk_info_trunk_active0_MASK 1 358#define lpfc_trunk_info_trunk_active0_WORD word0 359#define lpfc_trunk_info_trunk_active1_SHIFT 9 360#define lpfc_trunk_info_trunk_active1_MASK 1 361#define lpfc_trunk_info_trunk_active1_WORD word0 362#define lpfc_trunk_info_trunk_active2_SHIFT 10 363#define lpfc_trunk_info_trunk_active2_MASK 1 364#define lpfc_trunk_info_trunk_active2_WORD word0 365#define lpfc_trunk_info_trunk_active3_SHIFT 11 366#define lpfc_trunk_info_trunk_active3_MASK 1 367#define lpfc_trunk_info_trunk_active3_WORD word0 368#define lpfc_trunk_info_trunk_config0_SHIFT 12 369#define lpfc_trunk_info_trunk_config0_MASK 1 370#define lpfc_trunk_info_trunk_config0_WORD word0 371#define lpfc_trunk_info_trunk_config1_SHIFT 13 372#define lpfc_trunk_info_trunk_config1_MASK 1 373#define lpfc_trunk_info_trunk_config1_WORD word0 374#define lpfc_trunk_info_trunk_config2_SHIFT 14 375#define lpfc_trunk_info_trunk_config2_MASK 1 376#define lpfc_trunk_info_trunk_config2_WORD word0 377#define lpfc_trunk_info_trunk_config3_SHIFT 15 378#define lpfc_trunk_info_trunk_config3_MASK 1 379#define lpfc_trunk_info_trunk_config3_WORD word0 380 uint16_t port_speed; 381 uint16_t logical_speed; 382 uint32_t reserved3; 383}; 384 385struct get_trunk_info_req { 386 uint32_t command; 387}; 388 389/* driver only */ 390#define SLI_CONFIG_NOT_HANDLED 0 391#define SLI_CONFIG_HANDLED 1 392