1
2
3
4#include <linux/clk.h>
5#include <linux/console.h>
6#include <linux/io.h>
7#include <linux/iopoll.h>
8#include <linux/irq.h>
9#include <linux/module.h>
10#include <linux/of.h>
11#include <linux/of_device.h>
12#include <linux/pm_opp.h>
13#include <linux/platform_device.h>
14#include <linux/pm_runtime.h>
15#include <linux/pm_wakeirq.h>
16#include <linux/qcom-geni-se.h>
17#include <linux/serial.h>
18#include <linux/serial_core.h>
19#include <linux/slab.h>
20#include <linux/tty.h>
21#include <linux/tty_flip.h>
22
23
24#define SE_UART_LOOPBACK_CFG 0x22c
25#define SE_UART_IO_MACRO_CTRL 0x240
26#define SE_UART_TX_TRANS_CFG 0x25c
27#define SE_UART_TX_WORD_LEN 0x268
28#define SE_UART_TX_STOP_BIT_LEN 0x26c
29#define SE_UART_TX_TRANS_LEN 0x270
30#define SE_UART_RX_TRANS_CFG 0x280
31#define SE_UART_RX_WORD_LEN 0x28c
32#define SE_UART_RX_STALE_CNT 0x294
33#define SE_UART_TX_PARITY_CFG 0x2a4
34#define SE_UART_RX_PARITY_CFG 0x2a8
35#define SE_UART_MANUAL_RFR 0x2ac
36
37
38#define UART_TX_PAR_EN BIT(0)
39#define UART_CTS_MASK BIT(1)
40
41
42#define TX_WORD_LEN_MSK GENMASK(9, 0)
43
44
45#define TX_STOP_BIT_LEN_MSK GENMASK(23, 0)
46#define TX_STOP_BIT_LEN_1 0
47#define TX_STOP_BIT_LEN_1_5 1
48#define TX_STOP_BIT_LEN_2 2
49
50
51#define TX_TRANS_LEN_MSK GENMASK(23, 0)
52
53
54#define UART_RX_INS_STATUS_BIT BIT(2)
55#define UART_RX_PAR_EN BIT(3)
56
57
58#define RX_WORD_LEN_MASK GENMASK(9, 0)
59
60
61#define RX_STALE_CNT GENMASK(23, 0)
62
63
64#define PAR_CALC_EN BIT(0)
65#define PAR_MODE_MSK GENMASK(2, 1)
66#define PAR_MODE_SHFT 1
67#define PAR_EVEN 0x00
68#define PAR_ODD 0x01
69#define PAR_SPACE 0x10
70#define PAR_MARK 0x11
71
72
73#define UART_MANUAL_RFR_EN BIT(31)
74#define UART_RFR_NOT_READY BIT(1)
75#define UART_RFR_READY BIT(0)
76
77
78#define UART_START_TX 0x1
79#define UART_START_BREAK 0x4
80#define UART_STOP_BREAK 0x5
81
82#define UART_START_READ 0x1
83#define UART_PARAM 0x1
84
85#define UART_OVERSAMPLING 32
86#define STALE_TIMEOUT 16
87#define DEFAULT_BITS_PER_CHAR 10
88#define GENI_UART_CONS_PORTS 1
89#define GENI_UART_PORTS 3
90#define DEF_FIFO_DEPTH_WORDS 16
91#define DEF_TX_WM 2
92#define DEF_FIFO_WIDTH_BITS 32
93#define UART_RX_WM 2
94
95
96#define RX_TX_SORTED BIT(0)
97#define CTS_RTS_SORTED BIT(1)
98#define RX_TX_CTS_RTS_SORTED (RX_TX_SORTED | CTS_RTS_SORTED)
99
100
101#define DEFAULT_IO_MACRO_IO0_IO1_MASK GENMASK(3, 0)
102#define IO_MACRO_IO0_SEL 0x3
103#define DEFAULT_IO_MACRO_IO2_IO3_MASK GENMASK(15, 4)
104#define IO_MACRO_IO2_IO3_SWAP 0x4640
105
106
107#define BYTES_PER_FIFO_WORD 4
108
109struct qcom_geni_private_data {
110
111 struct uart_driver *drv;
112
113 u32 poll_cached_bytes;
114 unsigned int poll_cached_bytes_cnt;
115
116 u32 write_cached_bytes;
117 unsigned int write_cached_bytes_cnt;
118};
119
120struct qcom_geni_serial_port {
121 struct uart_port uport;
122 struct geni_se se;
123 const char *name;
124 u32 tx_fifo_depth;
125 u32 tx_fifo_width;
126 u32 rx_fifo_depth;
127 bool setup;
128 int (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop);
129 unsigned int baud;
130 void *rx_fifo;
131 u32 loopback;
132 bool brk;
133
134 unsigned int tx_remaining;
135 int wakeup_irq;
136 bool rx_tx_swap;
137 bool cts_rts_swap;
138
139 struct qcom_geni_private_data private_data;
140};
141
142static const struct uart_ops qcom_geni_console_pops;
143static const struct uart_ops qcom_geni_uart_pops;
144static struct uart_driver qcom_geni_console_driver;
145static struct uart_driver qcom_geni_uart_driver;
146static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop);
147static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop);
148static unsigned int qcom_geni_serial_tx_empty(struct uart_port *port);
149static void qcom_geni_serial_stop_rx(struct uart_port *uport);
150static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop);
151
152static const unsigned long root_freq[] = {7372800, 14745600, 19200000, 29491200,
153 32000000, 48000000, 51200000, 64000000,
154 80000000, 96000000, 100000000,
155 102400000, 112000000, 120000000,
156 128000000};
157
158#define to_dev_port(ptr, member) \
159 container_of(ptr, struct qcom_geni_serial_port, member)
160
161static struct qcom_geni_serial_port qcom_geni_uart_ports[GENI_UART_PORTS] = {
162 [0] = {
163 .uport = {
164 .iotype = UPIO_MEM,
165 .ops = &qcom_geni_uart_pops,
166 .flags = UPF_BOOT_AUTOCONF,
167 .line = 0,
168 },
169 },
170 [1] = {
171 .uport = {
172 .iotype = UPIO_MEM,
173 .ops = &qcom_geni_uart_pops,
174 .flags = UPF_BOOT_AUTOCONF,
175 .line = 1,
176 },
177 },
178 [2] = {
179 .uport = {
180 .iotype = UPIO_MEM,
181 .ops = &qcom_geni_uart_pops,
182 .flags = UPF_BOOT_AUTOCONF,
183 .line = 2,
184 },
185 },
186};
187
188static struct qcom_geni_serial_port qcom_geni_console_port = {
189 .uport = {
190 .iotype = UPIO_MEM,
191 .ops = &qcom_geni_console_pops,
192 .flags = UPF_BOOT_AUTOCONF,
193 .line = 0,
194 },
195};
196
197static int qcom_geni_serial_request_port(struct uart_port *uport)
198{
199 struct platform_device *pdev = to_platform_device(uport->dev);
200 struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
201
202 uport->membase = devm_platform_ioremap_resource(pdev, 0);
203 if (IS_ERR(uport->membase))
204 return PTR_ERR(uport->membase);
205 port->se.base = uport->membase;
206 return 0;
207}
208
209static void qcom_geni_serial_config_port(struct uart_port *uport, int cfg_flags)
210{
211 if (cfg_flags & UART_CONFIG_TYPE) {
212 uport->type = PORT_MSM;
213 qcom_geni_serial_request_port(uport);
214 }
215}
216
217static unsigned int qcom_geni_serial_get_mctrl(struct uart_port *uport)
218{
219 unsigned int mctrl = TIOCM_DSR | TIOCM_CAR;
220 u32 geni_ios;
221
222 if (uart_console(uport)) {
223 mctrl |= TIOCM_CTS;
224 } else {
225 geni_ios = readl(uport->membase + SE_GENI_IOS);
226 if (!(geni_ios & IO2_DATA_IN))
227 mctrl |= TIOCM_CTS;
228 }
229
230 return mctrl;
231}
232
233static void qcom_geni_serial_set_mctrl(struct uart_port *uport,
234 unsigned int mctrl)
235{
236 u32 uart_manual_rfr = 0;
237 struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
238
239 if (uart_console(uport))
240 return;
241
242 if (mctrl & TIOCM_LOOP)
243 port->loopback = RX_TX_CTS_RTS_SORTED;
244
245 if (!(mctrl & TIOCM_RTS) && !uport->suspended)
246 uart_manual_rfr = UART_MANUAL_RFR_EN | UART_RFR_NOT_READY;
247 writel(uart_manual_rfr, uport->membase + SE_UART_MANUAL_RFR);
248}
249
250static const char *qcom_geni_serial_get_type(struct uart_port *uport)
251{
252 return "MSM";
253}
254
255static struct qcom_geni_serial_port *get_port_from_line(int line, bool console)
256{
257 struct qcom_geni_serial_port *port;
258 int nr_ports = console ? GENI_UART_CONS_PORTS : GENI_UART_PORTS;
259
260 if (line < 0 || line >= nr_ports)
261 return ERR_PTR(-ENXIO);
262
263 port = console ? &qcom_geni_console_port : &qcom_geni_uart_ports[line];
264 return port;
265}
266
267static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
268 int offset, int field, bool set)
269{
270 u32 reg;
271 struct qcom_geni_serial_port *port;
272 unsigned int baud;
273 unsigned int fifo_bits;
274 unsigned long timeout_us = 20000;
275 struct qcom_geni_private_data *private_data = uport->private_data;
276
277 if (private_data->drv) {
278 port = to_dev_port(uport, uport);
279 baud = port->baud;
280 if (!baud)
281 baud = 115200;
282 fifo_bits = port->tx_fifo_depth * port->tx_fifo_width;
283
284
285
286
287 timeout_us = ((fifo_bits * USEC_PER_SEC) / baud) + 500;
288 }
289
290
291
292
293
294 timeout_us = DIV_ROUND_UP(timeout_us, 10) * 10;
295 while (timeout_us) {
296 reg = readl(uport->membase + offset);
297 if ((bool)(reg & field) == set)
298 return true;
299 udelay(10);
300 timeout_us -= 10;
301 }
302 return false;
303}
304
305static void qcom_geni_serial_setup_tx(struct uart_port *uport, u32 xmit_size)
306{
307 u32 m_cmd;
308
309 writel(xmit_size, uport->membase + SE_UART_TX_TRANS_LEN);
310 m_cmd = UART_START_TX << M_OPCODE_SHFT;
311 writel(m_cmd, uport->membase + SE_GENI_M_CMD0);
312}
313
314static void qcom_geni_serial_poll_tx_done(struct uart_port *uport)
315{
316 int done;
317 u32 irq_clear = M_CMD_DONE_EN;
318
319 done = qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
320 M_CMD_DONE_EN, true);
321 if (!done) {
322 writel(M_GENI_CMD_ABORT, uport->membase +
323 SE_GENI_M_CMD_CTRL_REG);
324 irq_clear |= M_CMD_ABORT_EN;
325 qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
326 M_CMD_ABORT_EN, true);
327 }
328 writel(irq_clear, uport->membase + SE_GENI_M_IRQ_CLEAR);
329}
330
331static void qcom_geni_serial_abort_rx(struct uart_port *uport)
332{
333 u32 irq_clear = S_CMD_DONE_EN | S_CMD_ABORT_EN;
334
335 writel(S_GENI_CMD_ABORT, uport->membase + SE_GENI_S_CMD_CTRL_REG);
336 qcom_geni_serial_poll_bit(uport, SE_GENI_S_CMD_CTRL_REG,
337 S_GENI_CMD_ABORT, false);
338 writel(irq_clear, uport->membase + SE_GENI_S_IRQ_CLEAR);
339 writel(FORCE_DEFAULT, uport->membase + GENI_FORCE_DEFAULT_REG);
340}
341
342#ifdef CONFIG_CONSOLE_POLL
343
344static int qcom_geni_serial_get_char(struct uart_port *uport)
345{
346 struct qcom_geni_private_data *private_data = uport->private_data;
347 u32 status;
348 u32 word_cnt;
349 int ret;
350
351 if (!private_data->poll_cached_bytes_cnt) {
352 status = readl(uport->membase + SE_GENI_M_IRQ_STATUS);
353 writel(status, uport->membase + SE_GENI_M_IRQ_CLEAR);
354
355 status = readl(uport->membase + SE_GENI_S_IRQ_STATUS);
356 writel(status, uport->membase + SE_GENI_S_IRQ_CLEAR);
357
358 status = readl(uport->membase + SE_GENI_RX_FIFO_STATUS);
359 word_cnt = status & RX_FIFO_WC_MSK;
360 if (!word_cnt)
361 return NO_POLL_CHAR;
362
363 if (word_cnt == 1 && (status & RX_LAST))
364
365
366
367
368 private_data->poll_cached_bytes_cnt =
369 (status & RX_LAST_BYTE_VALID_MSK) >>
370 RX_LAST_BYTE_VALID_SHFT;
371
372 if (private_data->poll_cached_bytes_cnt == 0)
373 private_data->poll_cached_bytes_cnt = BYTES_PER_FIFO_WORD;
374
375 private_data->poll_cached_bytes =
376 readl(uport->membase + SE_GENI_RX_FIFOn);
377 }
378
379 private_data->poll_cached_bytes_cnt--;
380 ret = private_data->poll_cached_bytes & 0xff;
381 private_data->poll_cached_bytes >>= 8;
382
383 return ret;
384}
385
386static void qcom_geni_serial_poll_put_char(struct uart_port *uport,
387 unsigned char c)
388{
389 writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG);
390 qcom_geni_serial_setup_tx(uport, 1);
391 WARN_ON(!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
392 M_TX_FIFO_WATERMARK_EN, true));
393 writel(c, uport->membase + SE_GENI_TX_FIFOn);
394 writel(M_TX_FIFO_WATERMARK_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
395 qcom_geni_serial_poll_tx_done(uport);
396}
397#endif
398
399#ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE
400static void qcom_geni_serial_wr_char(struct uart_port *uport, int ch)
401{
402 struct qcom_geni_private_data *private_data = uport->private_data;
403
404 private_data->write_cached_bytes =
405 (private_data->write_cached_bytes >> 8) | (ch << 24);
406 private_data->write_cached_bytes_cnt++;
407
408 if (private_data->write_cached_bytes_cnt == BYTES_PER_FIFO_WORD) {
409 writel(private_data->write_cached_bytes,
410 uport->membase + SE_GENI_TX_FIFOn);
411 private_data->write_cached_bytes_cnt = 0;
412 }
413}
414
415static void
416__qcom_geni_serial_console_write(struct uart_port *uport, const char *s,
417 unsigned int count)
418{
419 struct qcom_geni_private_data *private_data = uport->private_data;
420
421 int i;
422 u32 bytes_to_send = count;
423
424 for (i = 0; i < count; i++) {
425
426
427
428
429 if (s[i] == '\n')
430 bytes_to_send++;
431 }
432
433 writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG);
434 qcom_geni_serial_setup_tx(uport, bytes_to_send);
435 for (i = 0; i < count; ) {
436 size_t chars_to_write = 0;
437 size_t avail = DEF_FIFO_DEPTH_WORDS - DEF_TX_WM;
438
439
440
441
442
443
444
445 if (!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
446 M_TX_FIFO_WATERMARK_EN, true))
447 break;
448 chars_to_write = min_t(size_t, count - i, avail / 2);
449 uart_console_write(uport, s + i, chars_to_write,
450 qcom_geni_serial_wr_char);
451 writel(M_TX_FIFO_WATERMARK_EN, uport->membase +
452 SE_GENI_M_IRQ_CLEAR);
453 i += chars_to_write;
454 }
455
456 if (private_data->write_cached_bytes_cnt) {
457 private_data->write_cached_bytes >>= BITS_PER_BYTE *
458 (BYTES_PER_FIFO_WORD - private_data->write_cached_bytes_cnt);
459 writel(private_data->write_cached_bytes,
460 uport->membase + SE_GENI_TX_FIFOn);
461 private_data->write_cached_bytes_cnt = 0;
462 }
463
464 qcom_geni_serial_poll_tx_done(uport);
465}
466
467static void qcom_geni_serial_console_write(struct console *co, const char *s,
468 unsigned int count)
469{
470 struct uart_port *uport;
471 struct qcom_geni_serial_port *port;
472 bool locked = true;
473 unsigned long flags;
474 u32 geni_status;
475 u32 irq_en;
476
477 WARN_ON(co->index < 0 || co->index >= GENI_UART_CONS_PORTS);
478
479 port = get_port_from_line(co->index, true);
480 if (IS_ERR(port))
481 return;
482
483 uport = &port->uport;
484 if (oops_in_progress)
485 locked = spin_trylock_irqsave(&uport->lock, flags);
486 else
487 spin_lock_irqsave(&uport->lock, flags);
488
489 geni_status = readl(uport->membase + SE_GENI_STATUS);
490
491
492 if (!locked) {
493 geni_se_cancel_m_cmd(&port->se);
494 if (!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
495 M_CMD_CANCEL_EN, true)) {
496 geni_se_abort_m_cmd(&port->se);
497 qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
498 M_CMD_ABORT_EN, true);
499 writel(M_CMD_ABORT_EN, uport->membase +
500 SE_GENI_M_IRQ_CLEAR);
501 }
502 writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
503 } else if ((geni_status & M_GENI_CMD_ACTIVE) && !port->tx_remaining) {
504
505
506
507
508 qcom_geni_serial_poll_tx_done(uport);
509
510 if (uart_circ_chars_pending(&uport->state->xmit)) {
511 irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
512 writel(irq_en | M_TX_FIFO_WATERMARK_EN,
513 uport->membase + SE_GENI_M_IRQ_EN);
514 }
515 }
516
517 __qcom_geni_serial_console_write(uport, s, count);
518
519 if (port->tx_remaining)
520 qcom_geni_serial_setup_tx(uport, port->tx_remaining);
521
522 if (locked)
523 spin_unlock_irqrestore(&uport->lock, flags);
524}
525
526static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop)
527{
528 u32 i;
529 unsigned char buf[sizeof(u32)];
530 struct tty_port *tport;
531 struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
532
533 tport = &uport->state->port;
534 for (i = 0; i < bytes; ) {
535 int c;
536 int chunk = min_t(int, bytes - i, BYTES_PER_FIFO_WORD);
537
538 ioread32_rep(uport->membase + SE_GENI_RX_FIFOn, buf, 1);
539 i += chunk;
540 if (drop)
541 continue;
542
543 for (c = 0; c < chunk; c++) {
544 int sysrq;
545
546 uport->icount.rx++;
547 if (port->brk && buf[c] == 0) {
548 port->brk = false;
549 if (uart_handle_break(uport))
550 continue;
551 }
552
553 sysrq = uart_prepare_sysrq_char(uport, buf[c]);
554
555 if (!sysrq)
556 tty_insert_flip_char(tport, buf[c], TTY_NORMAL);
557 }
558 }
559 if (!drop)
560 tty_flip_buffer_push(tport);
561 return 0;
562}
563#else
564static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop)
565{
566 return -EPERM;
567}
568
569#endif
570
571static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop)
572{
573 struct tty_port *tport;
574 struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
575 u32 num_bytes_pw = port->tx_fifo_width / BITS_PER_BYTE;
576 u32 words = ALIGN(bytes, num_bytes_pw) / num_bytes_pw;
577 int ret;
578
579 tport = &uport->state->port;
580 ioread32_rep(uport->membase + SE_GENI_RX_FIFOn, port->rx_fifo, words);
581 if (drop)
582 return 0;
583
584 ret = tty_insert_flip_string(tport, port->rx_fifo, bytes);
585 if (ret != bytes) {
586 dev_err(uport->dev, "%s:Unable to push data ret %d_bytes %d\n",
587 __func__, ret, bytes);
588 WARN_ON_ONCE(1);
589 }
590 uport->icount.rx += ret;
591 tty_flip_buffer_push(tport);
592 return ret;
593}
594
595static void qcom_geni_serial_start_tx(struct uart_port *uport)
596{
597 u32 irq_en;
598 u32 status;
599
600 status = readl(uport->membase + SE_GENI_STATUS);
601 if (status & M_GENI_CMD_ACTIVE)
602 return;
603
604 if (!qcom_geni_serial_tx_empty(uport))
605 return;
606
607 irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
608 irq_en |= M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN;
609
610 writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG);
611 writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
612}
613
614static void qcom_geni_serial_stop_tx(struct uart_port *uport)
615{
616 u32 irq_en;
617 u32 status;
618 struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
619
620 irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
621 irq_en &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN);
622 writel(0, uport->membase + SE_GENI_TX_WATERMARK_REG);
623 writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
624 status = readl(uport->membase + SE_GENI_STATUS);
625
626 if (!(status & M_GENI_CMD_ACTIVE))
627 return;
628
629 geni_se_cancel_m_cmd(&port->se);
630 if (!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
631 M_CMD_CANCEL_EN, true)) {
632 geni_se_abort_m_cmd(&port->se);
633 qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
634 M_CMD_ABORT_EN, true);
635 writel(M_CMD_ABORT_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
636 }
637 writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
638}
639
640static void qcom_geni_serial_start_rx(struct uart_port *uport)
641{
642 u32 irq_en;
643 u32 status;
644 struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
645
646 status = readl(uport->membase + SE_GENI_STATUS);
647 if (status & S_GENI_CMD_ACTIVE)
648 qcom_geni_serial_stop_rx(uport);
649
650 geni_se_setup_s_cmd(&port->se, UART_START_READ, 0);
651
652 irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN);
653 irq_en |= S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN;
654 writel(irq_en, uport->membase + SE_GENI_S_IRQ_EN);
655
656 irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
657 irq_en |= M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN;
658 writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
659}
660
661static void qcom_geni_serial_stop_rx(struct uart_port *uport)
662{
663 u32 irq_en;
664 u32 status;
665 struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
666 u32 s_irq_status;
667
668 irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN);
669 irq_en &= ~(S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN);
670 writel(irq_en, uport->membase + SE_GENI_S_IRQ_EN);
671
672 irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
673 irq_en &= ~(M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN);
674 writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
675
676 status = readl(uport->membase + SE_GENI_STATUS);
677
678 if (!(status & S_GENI_CMD_ACTIVE))
679 return;
680
681 geni_se_cancel_s_cmd(&port->se);
682 qcom_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS,
683 S_CMD_CANCEL_EN, true);
684
685
686
687
688 s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS);
689
690 if (s_irq_status & S_RX_FIFO_LAST_EN)
691 qcom_geni_serial_handle_rx(uport, true);
692 writel(s_irq_status, uport->membase + SE_GENI_S_IRQ_CLEAR);
693
694 status = readl(uport->membase + SE_GENI_STATUS);
695 if (status & S_GENI_CMD_ACTIVE)
696 qcom_geni_serial_abort_rx(uport);
697}
698
699static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop)
700{
701 u32 status;
702 u32 word_cnt;
703 u32 last_word_byte_cnt;
704 u32 last_word_partial;
705 u32 total_bytes;
706 struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
707
708 status = readl(uport->membase + SE_GENI_RX_FIFO_STATUS);
709 word_cnt = status & RX_FIFO_WC_MSK;
710 last_word_partial = status & RX_LAST;
711 last_word_byte_cnt = (status & RX_LAST_BYTE_VALID_MSK) >>
712 RX_LAST_BYTE_VALID_SHFT;
713
714 if (!word_cnt)
715 return;
716 total_bytes = BYTES_PER_FIFO_WORD * (word_cnt - 1);
717 if (last_word_partial && last_word_byte_cnt)
718 total_bytes += last_word_byte_cnt;
719 else
720 total_bytes += BYTES_PER_FIFO_WORD;
721 port->handle_rx(uport, total_bytes, drop);
722}
723
724static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done,
725 bool active)
726{
727 struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
728 struct circ_buf *xmit = &uport->state->xmit;
729 size_t avail;
730 size_t remaining;
731 size_t pending;
732 int i;
733 u32 status;
734 u32 irq_en;
735 unsigned int chunk;
736 int tail;
737
738 status = readl(uport->membase + SE_GENI_TX_FIFO_STATUS);
739
740
741 if (active)
742 pending = port->tx_remaining;
743 else
744 pending = uart_circ_chars_pending(xmit);
745
746
747 if (!pending && !status && done) {
748 qcom_geni_serial_stop_tx(uport);
749 goto out_write_wakeup;
750 }
751
752 avail = port->tx_fifo_depth - (status & TX_FIFO_WC);
753 avail *= BYTES_PER_FIFO_WORD;
754
755 tail = xmit->tail;
756 chunk = min(avail, pending);
757 if (!chunk)
758 goto out_write_wakeup;
759
760 if (!port->tx_remaining) {
761 qcom_geni_serial_setup_tx(uport, pending);
762 port->tx_remaining = pending;
763
764 irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
765 if (!(irq_en & M_TX_FIFO_WATERMARK_EN))
766 writel(irq_en | M_TX_FIFO_WATERMARK_EN,
767 uport->membase + SE_GENI_M_IRQ_EN);
768 }
769
770 remaining = chunk;
771 for (i = 0; i < chunk; ) {
772 unsigned int tx_bytes;
773 u8 buf[sizeof(u32)];
774 int c;
775
776 memset(buf, 0, sizeof(buf));
777 tx_bytes = min_t(size_t, remaining, BYTES_PER_FIFO_WORD);
778
779 for (c = 0; c < tx_bytes ; c++) {
780 buf[c] = xmit->buf[tail++];
781 tail &= UART_XMIT_SIZE - 1;
782 }
783
784 iowrite32_rep(uport->membase + SE_GENI_TX_FIFOn, buf, 1);
785
786 i += tx_bytes;
787 uport->icount.tx += tx_bytes;
788 remaining -= tx_bytes;
789 port->tx_remaining -= tx_bytes;
790 }
791
792 xmit->tail = tail;
793
794
795
796
797
798
799 writel(M_TX_FIFO_WATERMARK_EN,
800 uport->membase + SE_GENI_M_IRQ_CLEAR);
801
802out_write_wakeup:
803 if (!port->tx_remaining) {
804 irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
805 if (irq_en & M_TX_FIFO_WATERMARK_EN)
806 writel(irq_en & ~M_TX_FIFO_WATERMARK_EN,
807 uport->membase + SE_GENI_M_IRQ_EN);
808 }
809
810 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
811 uart_write_wakeup(uport);
812}
813
814static irqreturn_t qcom_geni_serial_isr(int isr, void *dev)
815{
816 u32 m_irq_en;
817 u32 m_irq_status;
818 u32 s_irq_status;
819 u32 geni_status;
820 struct uart_port *uport = dev;
821 unsigned long flags;
822 bool drop_rx = false;
823 struct tty_port *tport = &uport->state->port;
824 struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
825
826 if (uport->suspended)
827 return IRQ_NONE;
828
829 spin_lock_irqsave(&uport->lock, flags);
830 m_irq_status = readl(uport->membase + SE_GENI_M_IRQ_STATUS);
831 s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS);
832 geni_status = readl(uport->membase + SE_GENI_STATUS);
833 m_irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
834 writel(m_irq_status, uport->membase + SE_GENI_M_IRQ_CLEAR);
835 writel(s_irq_status, uport->membase + SE_GENI_S_IRQ_CLEAR);
836
837 if (WARN_ON(m_irq_status & M_ILLEGAL_CMD_EN))
838 goto out_unlock;
839
840 if (s_irq_status & S_RX_FIFO_WR_ERR_EN) {
841 uport->icount.overrun++;
842 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
843 }
844
845 if (m_irq_status & m_irq_en & (M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN))
846 qcom_geni_serial_handle_tx(uport, m_irq_status & M_CMD_DONE_EN,
847 geni_status & M_GENI_CMD_ACTIVE);
848
849 if (s_irq_status & S_GP_IRQ_0_EN || s_irq_status & S_GP_IRQ_1_EN) {
850 if (s_irq_status & S_GP_IRQ_0_EN)
851 uport->icount.parity++;
852 drop_rx = true;
853 } else if (s_irq_status & S_GP_IRQ_2_EN ||
854 s_irq_status & S_GP_IRQ_3_EN) {
855 uport->icount.brk++;
856 port->brk = true;
857 }
858
859 if (s_irq_status & S_RX_FIFO_WATERMARK_EN ||
860 s_irq_status & S_RX_FIFO_LAST_EN)
861 qcom_geni_serial_handle_rx(uport, drop_rx);
862
863out_unlock:
864 uart_unlock_and_check_sysrq(uport, flags);
865
866 return IRQ_HANDLED;
867}
868
869static void get_tx_fifo_size(struct qcom_geni_serial_port *port)
870{
871 struct uart_port *uport;
872
873 uport = &port->uport;
874 port->tx_fifo_depth = geni_se_get_tx_fifo_depth(&port->se);
875 port->tx_fifo_width = geni_se_get_tx_fifo_width(&port->se);
876 port->rx_fifo_depth = geni_se_get_rx_fifo_depth(&port->se);
877 uport->fifosize =
878 (port->tx_fifo_depth * port->tx_fifo_width) / BITS_PER_BYTE;
879}
880
881
882static void qcom_geni_serial_shutdown(struct uart_port *uport)
883{
884 disable_irq(uport->irq);
885}
886
887static int qcom_geni_serial_port_setup(struct uart_port *uport)
888{
889 struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
890 u32 rxstale = DEFAULT_BITS_PER_CHAR * STALE_TIMEOUT;
891 u32 proto;
892 u32 pin_swap;
893
894 proto = geni_se_read_proto(&port->se);
895 if (proto != GENI_SE_UART) {
896 dev_err(uport->dev, "Invalid FW loaded, proto: %d\n", proto);
897 return -ENXIO;
898 }
899
900 qcom_geni_serial_stop_rx(uport);
901
902 get_tx_fifo_size(port);
903
904 writel(rxstale, uport->membase + SE_UART_RX_STALE_CNT);
905
906 pin_swap = readl(uport->membase + SE_UART_IO_MACRO_CTRL);
907 if (port->rx_tx_swap) {
908 pin_swap &= ~DEFAULT_IO_MACRO_IO2_IO3_MASK;
909 pin_swap |= IO_MACRO_IO2_IO3_SWAP;
910 }
911 if (port->cts_rts_swap) {
912 pin_swap &= ~DEFAULT_IO_MACRO_IO0_IO1_MASK;
913 pin_swap |= IO_MACRO_IO0_SEL;
914 }
915
916 if (port->rx_tx_swap || port->cts_rts_swap)
917 writel(pin_swap, uport->membase + SE_UART_IO_MACRO_CTRL);
918
919
920
921
922
923 if (uart_console(uport))
924 qcom_geni_serial_poll_tx_done(uport);
925 geni_se_config_packing(&port->se, BITS_PER_BYTE, BYTES_PER_FIFO_WORD,
926 false, true, true);
927 geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2);
928 geni_se_select_mode(&port->se, GENI_SE_FIFO);
929 port->setup = true;
930
931 return 0;
932}
933
934static int qcom_geni_serial_startup(struct uart_port *uport)
935{
936 int ret;
937 struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
938
939 if (!port->setup) {
940 ret = qcom_geni_serial_port_setup(uport);
941 if (ret)
942 return ret;
943 }
944 enable_irq(uport->irq);
945
946 return 0;
947}
948
949static unsigned long get_clk_cfg(unsigned long clk_freq)
950{
951 int i;
952
953 for (i = 0; i < ARRAY_SIZE(root_freq); i++) {
954 if (!(root_freq[i] % clk_freq))
955 return root_freq[i];
956 }
957 return 0;
958}
959
960static unsigned long get_clk_div_rate(unsigned int baud,
961 unsigned int sampling_rate, unsigned int *clk_div)
962{
963 unsigned long ser_clk;
964 unsigned long desired_clk;
965
966 desired_clk = baud * sampling_rate;
967 ser_clk = get_clk_cfg(desired_clk);
968 if (!ser_clk) {
969 pr_err("%s: Can't find matching DFS entry for baud %d\n",
970 __func__, baud);
971 return ser_clk;
972 }
973
974 *clk_div = ser_clk / desired_clk;
975 return ser_clk;
976}
977
978static void qcom_geni_serial_set_termios(struct uart_port *uport,
979 struct ktermios *termios, struct ktermios *old)
980{
981 unsigned int baud;
982 u32 bits_per_char;
983 u32 tx_trans_cfg;
984 u32 tx_parity_cfg;
985 u32 rx_trans_cfg;
986 u32 rx_parity_cfg;
987 u32 stop_bit_len;
988 unsigned int clk_div;
989 u32 ser_clk_cfg;
990 struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
991 unsigned long clk_rate;
992 u32 ver, sampling_rate;
993 unsigned int avg_bw_core;
994
995 qcom_geni_serial_stop_rx(uport);
996
997 baud = uart_get_baud_rate(uport, termios, old, 300, 4000000);
998 port->baud = baud;
999
1000 sampling_rate = UART_OVERSAMPLING;
1001
1002 ver = geni_se_get_qup_hw_version(&port->se);
1003 if (ver >= QUP_SE_VERSION_2_5)
1004 sampling_rate /= 2;
1005
1006 clk_rate = get_clk_div_rate(baud, sampling_rate, &clk_div);
1007 if (!clk_rate)
1008 goto out_restart_rx;
1009
1010 uport->uartclk = clk_rate;
1011 dev_pm_opp_set_rate(uport->dev, clk_rate);
1012 ser_clk_cfg = SER_CLK_EN;
1013 ser_clk_cfg |= clk_div << CLK_DIV_SHFT;
1014
1015
1016
1017
1018
1019 avg_bw_core = (baud > 115200) ? Bps_to_icc(CORE_2X_50_MHZ)
1020 : GENI_DEFAULT_BW;
1021 port->se.icc_paths[GENI_TO_CORE].avg_bw = avg_bw_core;
1022 port->se.icc_paths[CPU_TO_GENI].avg_bw = Bps_to_icc(baud);
1023 geni_icc_set_bw(&port->se);
1024
1025
1026 tx_trans_cfg = readl(uport->membase + SE_UART_TX_TRANS_CFG);
1027 tx_parity_cfg = readl(uport->membase + SE_UART_TX_PARITY_CFG);
1028 rx_trans_cfg = readl(uport->membase + SE_UART_RX_TRANS_CFG);
1029 rx_parity_cfg = readl(uport->membase + SE_UART_RX_PARITY_CFG);
1030 if (termios->c_cflag & PARENB) {
1031 tx_trans_cfg |= UART_TX_PAR_EN;
1032 rx_trans_cfg |= UART_RX_PAR_EN;
1033 tx_parity_cfg |= PAR_CALC_EN;
1034 rx_parity_cfg |= PAR_CALC_EN;
1035 if (termios->c_cflag & PARODD) {
1036 tx_parity_cfg |= PAR_ODD;
1037 rx_parity_cfg |= PAR_ODD;
1038 } else if (termios->c_cflag & CMSPAR) {
1039 tx_parity_cfg |= PAR_SPACE;
1040 rx_parity_cfg |= PAR_SPACE;
1041 } else {
1042 tx_parity_cfg |= PAR_EVEN;
1043 rx_parity_cfg |= PAR_EVEN;
1044 }
1045 } else {
1046 tx_trans_cfg &= ~UART_TX_PAR_EN;
1047 rx_trans_cfg &= ~UART_RX_PAR_EN;
1048 tx_parity_cfg &= ~PAR_CALC_EN;
1049 rx_parity_cfg &= ~PAR_CALC_EN;
1050 }
1051
1052
1053 switch (termios->c_cflag & CSIZE) {
1054 case CS5:
1055 bits_per_char = 5;
1056 break;
1057 case CS6:
1058 bits_per_char = 6;
1059 break;
1060 case CS7:
1061 bits_per_char = 7;
1062 break;
1063 case CS8:
1064 default:
1065 bits_per_char = 8;
1066 break;
1067 }
1068
1069
1070 if (termios->c_cflag & CSTOPB)
1071 stop_bit_len = TX_STOP_BIT_LEN_2;
1072 else
1073 stop_bit_len = TX_STOP_BIT_LEN_1;
1074
1075
1076 if (termios->c_cflag & CRTSCTS)
1077 tx_trans_cfg &= ~UART_CTS_MASK;
1078 else
1079 tx_trans_cfg |= UART_CTS_MASK;
1080
1081 if (baud)
1082 uart_update_timeout(uport, termios->c_cflag, baud);
1083
1084 if (!uart_console(uport))
1085 writel(port->loopback,
1086 uport->membase + SE_UART_LOOPBACK_CFG);
1087 writel(tx_trans_cfg, uport->membase + SE_UART_TX_TRANS_CFG);
1088 writel(tx_parity_cfg, uport->membase + SE_UART_TX_PARITY_CFG);
1089 writel(rx_trans_cfg, uport->membase + SE_UART_RX_TRANS_CFG);
1090 writel(rx_parity_cfg, uport->membase + SE_UART_RX_PARITY_CFG);
1091 writel(bits_per_char, uport->membase + SE_UART_TX_WORD_LEN);
1092 writel(bits_per_char, uport->membase + SE_UART_RX_WORD_LEN);
1093 writel(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN);
1094 writel(ser_clk_cfg, uport->membase + GENI_SER_M_CLK_CFG);
1095 writel(ser_clk_cfg, uport->membase + GENI_SER_S_CLK_CFG);
1096out_restart_rx:
1097 qcom_geni_serial_start_rx(uport);
1098}
1099
1100static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport)
1101{
1102 return !readl(uport->membase + SE_GENI_TX_FIFO_STATUS);
1103}
1104
1105#ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE
1106static int qcom_geni_console_setup(struct console *co, char *options)
1107{
1108 struct uart_port *uport;
1109 struct qcom_geni_serial_port *port;
1110 int baud = 115200;
1111 int bits = 8;
1112 int parity = 'n';
1113 int flow = 'n';
1114 int ret;
1115
1116 if (co->index >= GENI_UART_CONS_PORTS || co->index < 0)
1117 return -ENXIO;
1118
1119 port = get_port_from_line(co->index, true);
1120 if (IS_ERR(port)) {
1121 pr_err("Invalid line %d\n", co->index);
1122 return PTR_ERR(port);
1123 }
1124
1125 uport = &port->uport;
1126
1127 if (unlikely(!uport->membase))
1128 return -ENXIO;
1129
1130 if (!port->setup) {
1131 ret = qcom_geni_serial_port_setup(uport);
1132 if (ret)
1133 return ret;
1134 }
1135
1136 if (options)
1137 uart_parse_options(options, &baud, &parity, &bits, &flow);
1138
1139 return uart_set_options(uport, co, baud, parity, bits, flow);
1140}
1141
1142static void qcom_geni_serial_earlycon_write(struct console *con,
1143 const char *s, unsigned int n)
1144{
1145 struct earlycon_device *dev = con->data;
1146
1147 __qcom_geni_serial_console_write(&dev->port, s, n);
1148}
1149
1150#ifdef CONFIG_CONSOLE_POLL
1151static int qcom_geni_serial_earlycon_read(struct console *con,
1152 char *s, unsigned int n)
1153{
1154 struct earlycon_device *dev = con->data;
1155 struct uart_port *uport = &dev->port;
1156 int num_read = 0;
1157 int ch;
1158
1159 while (num_read < n) {
1160 ch = qcom_geni_serial_get_char(uport);
1161 if (ch == NO_POLL_CHAR)
1162 break;
1163 s[num_read++] = ch;
1164 }
1165
1166 return num_read;
1167}
1168
1169static void __init qcom_geni_serial_enable_early_read(struct geni_se *se,
1170 struct console *con)
1171{
1172 geni_se_setup_s_cmd(se, UART_START_READ, 0);
1173 con->read = qcom_geni_serial_earlycon_read;
1174}
1175#else
1176static inline void qcom_geni_serial_enable_early_read(struct geni_se *se,
1177 struct console *con) { }
1178#endif
1179
1180static int qcom_geni_serial_earlycon_exit(struct console *con)
1181{
1182 geni_remove_earlycon_icc_vote();
1183 return 0;
1184}
1185
1186static struct qcom_geni_private_data earlycon_private_data;
1187
1188static int __init qcom_geni_serial_earlycon_setup(struct earlycon_device *dev,
1189 const char *opt)
1190{
1191 struct uart_port *uport = &dev->port;
1192 u32 tx_trans_cfg;
1193 u32 tx_parity_cfg = 0;
1194 u32 rx_trans_cfg = 0;
1195 u32 rx_parity_cfg = 0;
1196 u32 stop_bit_len = 0;
1197 u32 bits_per_char;
1198 struct geni_se se;
1199
1200 if (!uport->membase)
1201 return -EINVAL;
1202
1203 uport->private_data = &earlycon_private_data;
1204
1205 memset(&se, 0, sizeof(se));
1206 se.base = uport->membase;
1207 if (geni_se_read_proto(&se) != GENI_SE_UART)
1208 return -ENXIO;
1209
1210
1211
1212
1213 tx_trans_cfg = UART_CTS_MASK;
1214 bits_per_char = BITS_PER_BYTE;
1215
1216
1217
1218
1219
1220 qcom_geni_serial_poll_tx_done(uport);
1221 qcom_geni_serial_abort_rx(uport);
1222 geni_se_config_packing(&se, BITS_PER_BYTE, BYTES_PER_FIFO_WORD,
1223 false, true, true);
1224 geni_se_init(&se, DEF_FIFO_DEPTH_WORDS / 2, DEF_FIFO_DEPTH_WORDS - 2);
1225 geni_se_select_mode(&se, GENI_SE_FIFO);
1226
1227 writel(tx_trans_cfg, uport->membase + SE_UART_TX_TRANS_CFG);
1228 writel(tx_parity_cfg, uport->membase + SE_UART_TX_PARITY_CFG);
1229 writel(rx_trans_cfg, uport->membase + SE_UART_RX_TRANS_CFG);
1230 writel(rx_parity_cfg, uport->membase + SE_UART_RX_PARITY_CFG);
1231 writel(bits_per_char, uport->membase + SE_UART_TX_WORD_LEN);
1232 writel(bits_per_char, uport->membase + SE_UART_RX_WORD_LEN);
1233 writel(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN);
1234
1235 dev->con->write = qcom_geni_serial_earlycon_write;
1236 dev->con->exit = qcom_geni_serial_earlycon_exit;
1237 dev->con->setup = NULL;
1238 qcom_geni_serial_enable_early_read(&se, dev->con);
1239
1240 return 0;
1241}
1242OF_EARLYCON_DECLARE(qcom_geni, "qcom,geni-debug-uart",
1243 qcom_geni_serial_earlycon_setup);
1244
1245static int __init console_register(struct uart_driver *drv)
1246{
1247 return uart_register_driver(drv);
1248}
1249
1250static void console_unregister(struct uart_driver *drv)
1251{
1252 uart_unregister_driver(drv);
1253}
1254
1255static struct console cons_ops = {
1256 .name = "ttyMSM",
1257 .write = qcom_geni_serial_console_write,
1258 .device = uart_console_device,
1259 .setup = qcom_geni_console_setup,
1260 .flags = CON_PRINTBUFFER,
1261 .index = -1,
1262 .data = &qcom_geni_console_driver,
1263};
1264
1265static struct uart_driver qcom_geni_console_driver = {
1266 .owner = THIS_MODULE,
1267 .driver_name = "qcom_geni_console",
1268 .dev_name = "ttyMSM",
1269 .nr = GENI_UART_CONS_PORTS,
1270 .cons = &cons_ops,
1271};
1272#else
1273static int console_register(struct uart_driver *drv)
1274{
1275 return 0;
1276}
1277
1278static void console_unregister(struct uart_driver *drv)
1279{
1280}
1281#endif
1282
1283static struct uart_driver qcom_geni_uart_driver = {
1284 .owner = THIS_MODULE,
1285 .driver_name = "qcom_geni_uart",
1286 .dev_name = "ttyHS",
1287 .nr = GENI_UART_PORTS,
1288};
1289
1290static void qcom_geni_serial_pm(struct uart_port *uport,
1291 unsigned int new_state, unsigned int old_state)
1292{
1293 struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
1294
1295
1296 if (old_state == UART_PM_STATE_UNDEFINED)
1297 old_state = UART_PM_STATE_OFF;
1298
1299 if (new_state == UART_PM_STATE_ON && old_state == UART_PM_STATE_OFF) {
1300 geni_icc_enable(&port->se);
1301 geni_se_resources_on(&port->se);
1302 } else if (new_state == UART_PM_STATE_OFF &&
1303 old_state == UART_PM_STATE_ON) {
1304 geni_se_resources_off(&port->se);
1305 geni_icc_disable(&port->se);
1306 }
1307}
1308
1309static const struct uart_ops qcom_geni_console_pops = {
1310 .tx_empty = qcom_geni_serial_tx_empty,
1311 .stop_tx = qcom_geni_serial_stop_tx,
1312 .start_tx = qcom_geni_serial_start_tx,
1313 .stop_rx = qcom_geni_serial_stop_rx,
1314 .set_termios = qcom_geni_serial_set_termios,
1315 .startup = qcom_geni_serial_startup,
1316 .request_port = qcom_geni_serial_request_port,
1317 .config_port = qcom_geni_serial_config_port,
1318 .shutdown = qcom_geni_serial_shutdown,
1319 .type = qcom_geni_serial_get_type,
1320 .set_mctrl = qcom_geni_serial_set_mctrl,
1321 .get_mctrl = qcom_geni_serial_get_mctrl,
1322#ifdef CONFIG_CONSOLE_POLL
1323 .poll_get_char = qcom_geni_serial_get_char,
1324 .poll_put_char = qcom_geni_serial_poll_put_char,
1325#endif
1326 .pm = qcom_geni_serial_pm,
1327};
1328
1329static const struct uart_ops qcom_geni_uart_pops = {
1330 .tx_empty = qcom_geni_serial_tx_empty,
1331 .stop_tx = qcom_geni_serial_stop_tx,
1332 .start_tx = qcom_geni_serial_start_tx,
1333 .stop_rx = qcom_geni_serial_stop_rx,
1334 .set_termios = qcom_geni_serial_set_termios,
1335 .startup = qcom_geni_serial_startup,
1336 .request_port = qcom_geni_serial_request_port,
1337 .config_port = qcom_geni_serial_config_port,
1338 .shutdown = qcom_geni_serial_shutdown,
1339 .type = qcom_geni_serial_get_type,
1340 .set_mctrl = qcom_geni_serial_set_mctrl,
1341 .get_mctrl = qcom_geni_serial_get_mctrl,
1342 .pm = qcom_geni_serial_pm,
1343};
1344
1345static int qcom_geni_serial_probe(struct platform_device *pdev)
1346{
1347 int ret = 0;
1348 int line = -1;
1349 struct qcom_geni_serial_port *port;
1350 struct uart_port *uport;
1351 struct resource *res;
1352 int irq;
1353 bool console = false;
1354 struct uart_driver *drv;
1355
1356 if (of_device_is_compatible(pdev->dev.of_node, "qcom,geni-debug-uart"))
1357 console = true;
1358
1359 if (console) {
1360 drv = &qcom_geni_console_driver;
1361 line = of_alias_get_id(pdev->dev.of_node, "serial");
1362 } else {
1363 drv = &qcom_geni_uart_driver;
1364 line = of_alias_get_id(pdev->dev.of_node, "hsuart");
1365 }
1366
1367 port = get_port_from_line(line, console);
1368 if (IS_ERR(port)) {
1369 dev_err(&pdev->dev, "Invalid line %d\n", line);
1370 return PTR_ERR(port);
1371 }
1372
1373 uport = &port->uport;
1374
1375 if (uport->private_data)
1376 return -ENODEV;
1377
1378 uport->dev = &pdev->dev;
1379 port->se.dev = &pdev->dev;
1380 port->se.wrapper = dev_get_drvdata(pdev->dev.parent);
1381 port->se.clk = devm_clk_get(&pdev->dev, "se");
1382 if (IS_ERR(port->se.clk)) {
1383 ret = PTR_ERR(port->se.clk);
1384 dev_err(&pdev->dev, "Err getting SE Core clk %d\n", ret);
1385 return ret;
1386 }
1387
1388 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1389 if (!res)
1390 return -EINVAL;
1391 uport->mapbase = res->start;
1392
1393 port->tx_fifo_depth = DEF_FIFO_DEPTH_WORDS;
1394 port->rx_fifo_depth = DEF_FIFO_DEPTH_WORDS;
1395 port->tx_fifo_width = DEF_FIFO_WIDTH_BITS;
1396
1397 if (!console) {
1398 port->rx_fifo = devm_kcalloc(uport->dev,
1399 port->rx_fifo_depth, sizeof(u32), GFP_KERNEL);
1400 if (!port->rx_fifo)
1401 return -ENOMEM;
1402 }
1403
1404 ret = geni_icc_get(&port->se, NULL);
1405 if (ret)
1406 return ret;
1407 port->se.icc_paths[GENI_TO_CORE].avg_bw = GENI_DEFAULT_BW;
1408 port->se.icc_paths[CPU_TO_GENI].avg_bw = GENI_DEFAULT_BW;
1409
1410
1411 ret = geni_icc_set_bw(&port->se);
1412 if (ret)
1413 return ret;
1414
1415 port->name = devm_kasprintf(uport->dev, GFP_KERNEL,
1416 "qcom_geni_serial_%s%d",
1417 uart_console(uport) ? "console" : "uart", uport->line);
1418 if (!port->name)
1419 return -ENOMEM;
1420
1421 irq = platform_get_irq(pdev, 0);
1422 if (irq < 0)
1423 return irq;
1424 uport->irq = irq;
1425 uport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_QCOM_GENI_CONSOLE);
1426
1427 if (!console)
1428 port->wakeup_irq = platform_get_irq_optional(pdev, 1);
1429
1430 if (of_property_read_bool(pdev->dev.of_node, "rx-tx-swap"))
1431 port->rx_tx_swap = true;
1432
1433 if (of_property_read_bool(pdev->dev.of_node, "cts-rts-swap"))
1434 port->cts_rts_swap = true;
1435
1436 port->se.opp_table = dev_pm_opp_set_clkname(&pdev->dev, "se");
1437 if (IS_ERR(port->se.opp_table))
1438 return PTR_ERR(port->se.opp_table);
1439
1440 ret = dev_pm_opp_of_add_table(&pdev->dev);
1441 if (ret && ret != -ENODEV) {
1442 dev_err(&pdev->dev, "invalid OPP table in device tree\n");
1443 goto put_clkname;
1444 }
1445
1446 port->private_data.drv = drv;
1447 uport->private_data = &port->private_data;
1448 platform_set_drvdata(pdev, port);
1449 port->handle_rx = console ? handle_rx_console : handle_rx_uart;
1450
1451 ret = uart_add_one_port(drv, uport);
1452 if (ret)
1453 goto err;
1454
1455 irq_set_status_flags(uport->irq, IRQ_NOAUTOEN);
1456 ret = devm_request_irq(uport->dev, uport->irq, qcom_geni_serial_isr,
1457 IRQF_TRIGGER_HIGH, port->name, uport);
1458 if (ret) {
1459 dev_err(uport->dev, "Failed to get IRQ ret %d\n", ret);
1460 uart_remove_one_port(drv, uport);
1461 goto err;
1462 }
1463
1464
1465
1466
1467
1468
1469 pm_runtime_set_active(&pdev->dev);
1470
1471 if (port->wakeup_irq > 0) {
1472 device_init_wakeup(&pdev->dev, true);
1473 ret = dev_pm_set_dedicated_wake_irq(&pdev->dev,
1474 port->wakeup_irq);
1475 if (ret) {
1476 device_init_wakeup(&pdev->dev, false);
1477 uart_remove_one_port(drv, uport);
1478 goto err;
1479 }
1480 }
1481
1482 return 0;
1483err:
1484 dev_pm_opp_of_remove_table(&pdev->dev);
1485put_clkname:
1486 dev_pm_opp_put_clkname(port->se.opp_table);
1487 return ret;
1488}
1489
1490static int qcom_geni_serial_remove(struct platform_device *pdev)
1491{
1492 struct qcom_geni_serial_port *port = platform_get_drvdata(pdev);
1493 struct uart_driver *drv = port->private_data.drv;
1494
1495 dev_pm_opp_of_remove_table(&pdev->dev);
1496 dev_pm_opp_put_clkname(port->se.opp_table);
1497 dev_pm_clear_wake_irq(&pdev->dev);
1498 device_init_wakeup(&pdev->dev, false);
1499 uart_remove_one_port(drv, &port->uport);
1500
1501 return 0;
1502}
1503
1504static int __maybe_unused qcom_geni_serial_sys_suspend(struct device *dev)
1505{
1506 struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
1507 struct uart_port *uport = &port->uport;
1508 struct qcom_geni_private_data *private_data = uport->private_data;
1509
1510
1511
1512
1513
1514 if (uart_console(uport)) {
1515 geni_icc_set_tag(&port->se, 0x3);
1516 geni_icc_set_bw(&port->se);
1517 }
1518 return uart_suspend_port(private_data->drv, uport);
1519}
1520
1521static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev)
1522{
1523 int ret;
1524 struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
1525 struct uart_port *uport = &port->uport;
1526 struct qcom_geni_private_data *private_data = uport->private_data;
1527
1528 ret = uart_resume_port(private_data->drv, uport);
1529 if (uart_console(uport)) {
1530 geni_icc_set_tag(&port->se, 0x7);
1531 geni_icc_set_bw(&port->se);
1532 }
1533 return ret;
1534}
1535
1536static const struct dev_pm_ops qcom_geni_serial_pm_ops = {
1537 SET_SYSTEM_SLEEP_PM_OPS(qcom_geni_serial_sys_suspend,
1538 qcom_geni_serial_sys_resume)
1539};
1540
1541static const struct of_device_id qcom_geni_serial_match_table[] = {
1542 { .compatible = "qcom,geni-debug-uart", },
1543 { .compatible = "qcom,geni-uart", },
1544 {}
1545};
1546MODULE_DEVICE_TABLE(of, qcom_geni_serial_match_table);
1547
1548static struct platform_driver qcom_geni_serial_platform_driver = {
1549 .remove = qcom_geni_serial_remove,
1550 .probe = qcom_geni_serial_probe,
1551 .driver = {
1552 .name = "qcom_geni_serial",
1553 .of_match_table = qcom_geni_serial_match_table,
1554 .pm = &qcom_geni_serial_pm_ops,
1555 },
1556};
1557
1558static int __init qcom_geni_serial_init(void)
1559{
1560 int ret;
1561
1562 ret = console_register(&qcom_geni_console_driver);
1563 if (ret)
1564 return ret;
1565
1566 ret = uart_register_driver(&qcom_geni_uart_driver);
1567 if (ret) {
1568 console_unregister(&qcom_geni_console_driver);
1569 return ret;
1570 }
1571
1572 ret = platform_driver_register(&qcom_geni_serial_platform_driver);
1573 if (ret) {
1574 console_unregister(&qcom_geni_console_driver);
1575 uart_unregister_driver(&qcom_geni_uart_driver);
1576 }
1577 return ret;
1578}
1579module_init(qcom_geni_serial_init);
1580
1581static void __exit qcom_geni_serial_exit(void)
1582{
1583 platform_driver_unregister(&qcom_geni_serial_platform_driver);
1584 console_unregister(&qcom_geni_console_driver);
1585 uart_unregister_driver(&qcom_geni_uart_driver);
1586}
1587module_exit(qcom_geni_serial_exit);
1588
1589MODULE_DESCRIPTION("Serial driver for GENI based QUP cores");
1590MODULE_LICENSE("GPL v2");
1591