// SPDX-License-Identifier: GPL-2.0
/*
 * mtu3_dr.c - dual role switch and host glue layer
 *
 * Copyright (C) 2016 MediaTek Inc.
 *
 * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
 */

#include <linux/clk.h>
#include <linux/iopoll.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/of_device.h>
#include <linux/regmap.h>

#include "mtu3.h"
#include "mtu3_dr.h"

/* mt8173 etc */
#define PERI_WK_CTRL1   0x4
#define WC1_IS_C(x)     (((x) & 0xf) << 26)  /* cycle debounce */
#define WC1_IS_EN       BIT(25)
#define WC1_IS_P        BIT(6)  /* polarity for ip sleep */

/* mt2712 etc */
#define PERI_SSUSB_SPM_CTRL     0x0
#define SSC_IP_SLEEP_EN BIT(4)
#define SSC_SPM_INT_EN          BIT(1)

enum ssusb_uwk_vers {
        SSUSB_UWK_V1 = 1,
        SSUSB_UWK_V2,
};

/*
 * ip-sleep wakeup mode:
 * all clocks can be turn off, but power domain should be kept on
 */
static void ssusb_wakeup_ip_sleep_set(struct ssusb_mtk *ssusb, bool enable)
{
        u32 reg, msk, val;

        switch (ssusb->uwk_vers) {
        case SSUSB_UWK_V1:
                reg = ssusb->uwk_reg_base + PERI_WK_CTRL1;
                msk = WC1_IS_EN | WC1_IS_C(0xf) | WC1_IS_P;
                val = enable ? (WC1_IS_EN | WC1_IS_C(0x8)) : 0;
                break;
        case SSUSB_UWK_V2:
                reg = ssusb->uwk_reg_base + PERI_SSUSB_SPM_CTRL;
                msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN;
                val = enable ? msk : 0;
                break;
        default:
                return;
        }
        regmap_update_bits(ssusb->uwk, reg, msk, val);
}

int ssusb_wakeup_of_property_parse(struct ssusb_mtk *ssusb,
                                struct device_node *dn)
{
        struct of_phandle_args args;
        int ret;

        /* wakeup function is optional */
        ssusb->uwk_en = of_property_read_bool(dn, "wakeup-source");
        if (!ssusb->uwk_en)
                return 0;

        ret = of_parse_phandle_with_fixed_args(dn,
                                "mediatek,syscon-wakeup", 2, 0, &args);
        if (ret)
                return ret;

        ssusb->uwk_reg_base = args.args[0];
        ssusb->uwk_vers = args.args[1];
        ssusb->uwk = syscon_node_to_regmap(args.np);
        of_node_put(args.np);
        dev_info(ssusb->dev, "uwk - reg:0x%x, version:%d\n",
                        ssusb->uwk_reg_base, ssusb->uwk_vers);

        return PTR_ERR_OR_ZERO(ssusb->uwk);
}

void ssusb_wakeup_set(struct ssusb_mtk *ssusb, bool enable)
{
        if (ssusb->uwk_en)
                ssusb_wakeup_ip_sleep_set(ssusb, enable);
}

static void host_ports_num_get(struct ssusb_mtk *ssusb)
{
        u32 xhci_cap;

        xhci_cap = mtu3_readl(ssusb->ippc_base, U3D_SSUSB_IP_XHCI_CAP);
        ssusb->u2_ports = SSUSB_IP_XHCI_U2_PORT_NUM(xhci_cap);
        ssusb->u3_ports = SSUSB_IP_XHCI_U3_PORT_NUM(xhci_cap);

        dev_dbg(ssusb->dev, "host - u2_ports:%d, u3_ports:%d\n",
                 ssusb->u2_ports, ssusb->u3_ports);
}

/* only configure ports will be used later */
int ssusb_host_enable(struct ssusb_mtk *ssusb)
{
        void __iomem *ibase = ssusb->ippc_base;
        int num_u3p = ssusb->u3_ports;
        int num_u2p = ssusb->u2_ports;
        int u3_ports_disabed;
        u32 check_clk;
        u32 value;
        int i;

        /* power on host ip */
        mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);

        /* power on and enable u3 ports except skipped ones */
        u3_ports_disabed = 0;
        for (i = 0; i < num_u3p; i++) {
                if ((0x1 << i) & ssusb->u3p_dis_msk) {
                        u3_ports_disabed++;
                        continue;
                }

                value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
                value &= ~(SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS);
                value |= SSUSB_U3_PORT_HOST_SEL;
                mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
        }

        /* power on and enable all u2 ports */
        for (i = 0; i < num_u2p; i++) {
                value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
                value &= ~(SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS);
                value |= SSUSB_U2_PORT_HOST_SEL;
                mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
        }

        check_clk = SSUSB_XHCI_RST_B_STS;
        if (num_u3p > u3_ports_disabed)
                check_clk = SSUSB_U3_MAC_RST_B_STS;

        return ssusb_check_clocks(ssusb, check_clk);
}

int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend)
{
        void __iomem *ibase = ssusb->ippc_base;
        int num_u3p = ssusb->u3_ports;
        int num_u2p = ssusb->u2_ports;
        u32 value;
        int ret;
        int i;

        /* power down and disable u3 ports except skipped ones */
        for (i = 0; i < num_u3p; i++) {
                if ((0x1 << i) & ssusb->u3p_dis_msk)
                        continue;

                value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
                value |= SSUSB_U3_PORT_PDN;
                value |= suspend ? 0 : SSUSB_U3_PORT_DIS;
                mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
        }

        /* power down and disable all u2 ports */
        for (i = 0; i < num_u2p; i++) {
                value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
                value |= SSUSB_U2_PORT_PDN;
                value |= suspend ? 0 : SSUSB_U2_PORT_DIS;
                mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
        }

        /* power down host ip */
        mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);

        if (!suspend)
                return 0;

        /* wait for host ip to sleep */
        ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS1, value,
                          (value & SSUSB_IP_SLEEP_STS), 100, 100000);
        if (ret)
                dev_err(ssusb->dev, "ip sleep failed!!!\n");

        return ret;
}

static void ssusb_host_setup(struct ssusb_mtk *ssusb)
{
        struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;

        host_ports_num_get(ssusb);

        /*
         * power on host and power on/enable all ports
         * if support OTG, gadget driver will switch port0 to device mode
         */
        ssusb_host_enable(ssusb);

        if (otg_sx->manual_drd_enabled)
                ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);

        /* if port0 supports dual-role, works as host mode by default */
        ssusb_set_vbus(&ssusb->otg_switch, 1);
}

static void ssusb_host_cleanup(struct ssusb_mtk *ssusb)
{
        if (ssusb->is_host)
                ssusb_set_vbus(&ssusb->otg_switch, 0);

        ssusb_host_disable(ssusb, false);
}

/*
 * If host supports multiple ports, the VBUSes(5V) of ports except port0
 * which supports OTG are better to be enabled by default in DTS.
 * Because the host driver will keep link with devices attached when system
 * enters suspend mode, so no need to control VBUSes after initialization.
 */
int ssusb_host_init(struct ssusb_mtk *ssusb, struct device_node *parent_dn)
{
        struct device *parent_dev = ssusb->dev;
        int ret;

        ssusb_host_setup(ssusb);

        ret = of_platform_populate(parent_dn, NULL, NULL, parent_dev);
        if (ret) {
                dev_dbg(parent_dev, "failed to create child devices at %pOF\n",
                                parent_dn);
                return ret;
        }

        dev_info(parent_dev, "xHCI platform device register success...\n");

        return 0;
}

void ssusb_host_exit(struct ssusb_mtk *ssusb)
{
        of_platform_depopulate(ssusb->dev);
        ssusb_host_cleanup(ssusb);
}