// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Cell Broadband Engine Performance Monitor
 *
 * (C) Copyright IBM Corporation 2001,2006
 *
 * Author:
 *    David Erb (djerb@us.ibm.com)
 *    Kevin Corry (kevcorry@us.ibm.com)
 */

#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/export.h>
#include <asm/io.h>
#include <asm/irq_regs.h>
#include <asm/machdep.h>
#include <asm/pmc.h>
#include <asm/reg.h>
#include <asm/spu.h>
#include <asm/cell-regs.h>

#include "interrupt.h"

/*
 * When writing to write-only mmio addresses, save a shadow copy. All of the
 * registers are 32-bit, but stored in the upper-half of a 64-bit field in
 * pmd_regs.
 */

#define WRITE_WO_MMIO(reg, x)                                   \
        do {                                                    \
                u32 _x = (x);                                   \
                struct cbe_pmd_regs __iomem *pmd_regs;          \
                struct cbe_pmd_shadow_regs *shadow_regs;        \
                pmd_regs = cbe_get_cpu_pmd_regs(cpu);           \
                shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu); \
                out_be64(&(pmd_regs->reg), (((u64)_x) << 32));  \
                shadow_regs->reg = _x;                          \
        } while (0)

#define READ_SHADOW_REG(val, reg)                               \
        do {                                                    \
                struct cbe_pmd_shadow_regs *shadow_regs;        \
                shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu); \
                (val) = shadow_regs->reg;                       \
        } while (0)

#define READ_MMIO_UPPER32(val, reg)                             \
        do {                                                    \
                struct cbe_pmd_regs __iomem *pmd_regs;          \
                pmd_regs = cbe_get_cpu_pmd_regs(cpu);           \
                (val) = (u32)(in_be64(&pmd_regs->reg) >> 32);   \
        } while (0)

/*
 * Physical counter registers.
 * Each physical counter can act as one 32-bit counter or two 16-bit counters.
 */

u32 cbe_read_phys_ctr(u32 cpu, u32 phys_ctr)
{
        u32 val_in_latch, val = 0;

        if (phys_ctr < NR_PHYS_CTRS) {
                READ_SHADOW_REG(val_in_latch, counter_value_in_latch);

                /* Read the latch or the actual counter, whichever is newer. */
                if (val_in_latch & (1 << phys_ctr)) {
                        READ_SHADOW_REG(val, pm_ctr[phys_ctr]);
                } else {
                        READ_MMIO_UPPER32(val, pm_ctr[phys_ctr]);
                }
        }

        return val;
}
EXPORT_SYMBOL_GPL(cbe_read_phys_ctr);

void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val)
{
        struct cbe_pmd_shadow_regs *shadow_regs;
        u32 pm_ctrl;

        if (phys_ctr < NR_PHYS_CTRS) {
                /* Writing to a counter only writes to a hardware latch.
                 * The new value is not propagated to the actual counter
                 * until the performance monitor is enabled.
                 */
                WRITE_WO_MMIO(pm_ctr[phys_ctr], val);

                pm_ctrl = cbe_read_pm(cpu, pm_control);
                if (pm_ctrl & CBE_PM_ENABLE_PERF_MON) {
                        /* The counters are already active, so we need to
                         * rewrite the pm_control register to "re-enable"
                         * the PMU.
                         */
                        cbe_write_pm(cpu, pm_control, pm_ctrl);
                } else {
                        shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu);
                        shadow_regs->counter_value_in_latch |= (1 << phys_ctr);
                }
        }
}
EXPORT_SYMBOL_GPL(cbe_write_phys_ctr);

/*
 * "Logical" counter registers.
 * These will read/write 16-bits or 32-bits depending on the
 * current size of the counter. Counters 4 - 7 are always 16-bit.
 */

u32 cbe_read_ctr(u32 cpu, u32 ctr)
{
        u32 val;
        u32 phys_ctr = ctr & (NR_PHYS_CTRS - 1);

        val = cbe_read_phys_ctr(cpu, phys_ctr);

        if (cbe_get_ctr_size(cpu, phys_ctr) == 16)
                val = (ctr < NR_PHYS_CTRS) ? (val >> 16) : (val & 0xffff);

        return val;
}
EXPORT_SYMBOL_GPL(cbe_read_ctr);

void cbe_write_ctr(u32 cpu, u32 ctr, u32 val)
{
        u32 phys_ctr;
        u32 phys_val;

        phys_ctr = ctr & (NR_PHYS_CTRS - 1);

        if (cbe_get_ctr_size(cpu, phys_ctr) == 16) {
                phys_val = cbe_read_phys_ctr(cpu, phys_ctr);

                if (ctr < NR_PHYS_CTRS)
                        val = (val << 16) | (phys_val & 0xffff);
                else
                        val = (val & 0xffff) | (phys_val & 0xffff0000);
        }

        cbe_write_phys_ctr(cpu, phys_ctr, val);
}
EXPORT_SYMBOL_GPL(cbe_write_ctr);

/*
 * Counter-control registers.
 * Each "logical" counter has a corresponding control register.
 */

u32 cbe_read_pm07_control(u32 cpu, u32 ctr)
{
        u32 pm07_control = 0;

        if (ctr < NR_CTRS)
                READ_SHADOW_REG(pm07_control, pm07_control[ctr]);

        return pm07_control;
}
EXPORT_SYMBOL_GPL(cbe_read_pm07_control);

void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val)
{
        if (ctr < NR_CTRS)
                WRITE_WO_MMIO(pm07_control[ctr], val);
}
EXPORT_SYMBOL_GPL(cbe_write_pm07_control);

/*
 * Other PMU control registers. Most of these are write-only.
 */

u32 cbe_read_pm(u32 cpu, enum pm_reg_name reg)
{
        u32 val = 0;

        switch (reg) {
        case group_control:
                READ_SHADOW_REG(val, group_control);
                break;

        case debug_bus_control:
                READ_SHADOW_REG(val, debug_bus_control);
                break;

        case trace_address:
                READ_MMIO_UPPER32(val, trace_address);
                break;

        case ext_tr_timer:
                READ_SHADOW_REG(val, ext_tr_timer);
                break;

        case pm_status:
                READ_MMIO_UPPER32(val, pm_status);
                break;

        case pm_control:
                READ_SHADOW_REG(val, pm_control);
                break;

        case pm_interval:
                READ_MMIO_UPPER32(val, pm_interval);
                break;

        case pm_start_stop:
                READ_SHADOW_REG(val, pm_start_stop);
                break;
        }

        return val;
}
EXPORT_SYMBOL_GPL(cbe_read_pm);

void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val)
{
        switch (reg) {
        case group_control:
                WRITE_WO_MMIO(group_control, val);
                break;

        case debug_bus_control:
                WRITE_WO_MMIO(debug_bus_control, val);
                break;

        case trace_address:
                WRITE_WO_MMIO(trace_address, val);
                break;

        case ext_tr_timer:
                WRITE_WO_MMIO(ext_tr_timer, val);
                break;

        case pm_status:
                WRITE_WO_MMIO(pm_status, val);
                break;

        case pm_control:
                WRITE_WO_MMIO(pm_control, val);
                break;

        case pm_interval:
                WRITE_WO_MMIO(pm_interval, val);
                break;

        case pm_start_stop:
                WRITE_WO_MMIO(pm_start_stop, val);
                break;
        }
}
EXPORT_SYMBOL_GPL(cbe_write_pm);

/*
 * Get/set the size of a physical counter to either 16 or 32 bits.
 */

u32 cbe_get_ctr_size(u32 cpu, u32 phys_ctr)
{
        u32 pm_ctrl, size = 0;

        if (phys_ctr < NR_PHYS_CTRS) {
                pm_ctrl = cbe_read_pm(cpu, pm_control);
                size = (pm_ctrl & CBE_PM_16BIT_CTR(phys_ctr)) ? 16 : 32;
        }

        return size;
}
EXPORT_SYMBOL_GPL(cbe_get_ctr_size);

void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size)
{
        u32 pm_ctrl;

        if (phys_ctr < NR_PHYS_CTRS) {
                pm_ctrl = cbe_read_pm(cpu, pm_control);
                switch (ctr_size) {
                case 16:
                        pm_ctrl |= CBE_PM_16BIT_CTR(phys_ctr);
                        break;

                case 32:
                        pm_ctrl &= ~CBE_PM_16BIT_CTR(phys_ctr);
                        break;
                }
                cbe_write_pm(cpu, pm_control, pm_ctrl);
        }
}
EXPORT_SYMBOL_GPL(cbe_set_ctr_size);

/*
 * Enable/disable the entire performance monitoring unit.
 * When we enable the PMU, all pending writes to counters get committed.
 */

void cbe_enable_pm(u32 cpu)
{
        struct cbe_pmd_shadow_regs *shadow_regs;
        u32 pm_ctrl;

        shadow_regs = cbe_get_cpu_pmd_shadow_regs(cpu);
        shadow_regs->counter_value_in_latch = 0;

        pm_ctrl = cbe_read_pm(cpu, pm_control) | CBE_PM_ENABLE_PERF_MON;
        cbe_write_pm(cpu, pm_control, pm_ctrl);
}
EXPORT_SYMBOL_GPL(cbe_enable_pm);

void cbe_disable_pm(u32 cpu)
{
        u32 pm_ctrl;
        pm_ctrl = cbe_read_pm(cpu, pm_control) & ~CBE_PM_ENABLE_PERF_MON;
        cbe_write_pm(cpu, pm_control, pm_ctrl);
}
EXPORT_SYMBOL_GPL(cbe_disable_pm);

/*
 * Reading from the trace_buffer.
 * The trace buffer is two 64-bit registers. Reading from
 * the second half automatically increments the trace_address.
 */

void cbe_read_trace_buffer(u32 cpu, u64 *buf)
{
        struct cbe_pmd_regs __iomem *pmd_regs = cbe_get_cpu_pmd_regs(cpu);

        *buf++ = in_be64(&pmd_regs->trace_buffer_0_63);
        *buf++ = in_be64(&pmd_regs->trace_buffer_64_127);
}
EXPORT_SYMBOL_GPL(cbe_read_trace_buffer);

/*
 * Enabling/disabling interrupts for the entire performance monitoring unit.
 */

u32 cbe_get_and_clear_pm_interrupts(u32 cpu)
{
        /* Reading pm_status clears the interrupt bits. */
        return cbe_read_pm(cpu, pm_status);
}
EXPORT_SYMBOL_GPL(cbe_get_and_clear_pm_interrupts);

void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask)
{
        /* Set which node and thread will handle the next interrupt. */
        iic_set_interrupt_routing(cpu, thread, 0);

        /* Enable the interrupt bits in the pm_status register. */
        if (mask)
                cbe_write_pm(cpu, pm_status, mask);
}
EXPORT_SYMBOL_GPL(cbe_enable_pm_interrupts);

void cbe_disable_pm_interrupts(u32 cpu)
{
        cbe_get_and_clear_pm_interrupts(cpu);
        cbe_write_pm(cpu, pm_status, 0);
}
EXPORT_SYMBOL_GPL(cbe_disable_pm_interrupts);

static irqreturn_t cbe_pm_irq(int irq, void *dev_id)
{
        perf_irq(get_irq_regs());
        return IRQ_HANDLED;
}

static int __init cbe_init_pm_irq(void)
{
        unsigned int irq;
        int rc, node;

        for_each_online_node(node) {
                irq = irq_create_mapping(NULL, IIC_IRQ_IOEX_PMI |
                                               (node << IIC_IRQ_NODE_SHIFT));
                if (!irq) {
                        printk("ERROR: Unable to allocate irq for node %d\n",
                               node);
                        return -EINVAL;
                }

                rc = request_irq(irq, cbe_pm_irq,
                                 0, "cbe-pmu-0", NULL);
                if (rc) {
                        printk("ERROR: Request for irq on node %d failed\n",
                               node);
                        return rc;
                }
        }

        return 0;
}
machine_arch_initcall(cell, cbe_init_pm_irq);

void cbe_sync_irq(int node)
{
        unsigned int irq;

        irq = irq_find_mapping(NULL,
                               IIC_IRQ_IOEX_PMI
                               | (node << IIC_IRQ_NODE_SHIFT));

        if (!irq) {
                printk(KERN_WARNING "ERROR, unable to get existing irq %d " \
                "for node %d\n", irq, node);
                return;
        }

        synchronize_irq(irq);
}
EXPORT_SYMBOL_GPL(cbe_sync_irq);