/*
 * Copyright 2015-2017 Advanced Micro Devices, Inc.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 * OTHER DEALINGS IN THE SOFTWARE.
 */

#include <linux/pci.h>
#include <linux/acpi.h>
#include "kfd_crat.h"
#include "kfd_priv.h"
#include "kfd_topology.h"
#include "kfd_iommu.h"
#include "amdgpu_amdkfd.h"

/* GPU Processor ID base for dGPUs for which VCRAT needs to be created.
 * GPU processor ID are expressed with Bit[31]=1.
 * The base is set to 0x8000_0000 + 0x1000 to avoid collision with GPU IDs
 * used in the CRAT.
 */
static uint32_t gpu_processor_id_low = 0x80001000;

/* Return the next available gpu_processor_id and increment it for next GPU
 *      @total_cu_count - Total CUs present in the GPU including ones
 *                        masked off
 */
static inline unsigned int get_and_inc_gpu_processor_id(
                                unsigned int total_cu_count)
{
        int current_id = gpu_processor_id_low;

        gpu_processor_id_low += total_cu_count;
        return current_id;
}

/* Static table to describe GPU Cache information */
struct kfd_gpu_cache_info {
        uint32_t        cache_size;
        uint32_t        cache_level;
        uint32_t        flags;
        /* Indicates how many Compute Units share this cache
         * Value = 1 indicates the cache is not shared
         */
        uint32_t        num_cu_shared;
};

static struct kfd_gpu_cache_info kaveri_cache_info[] = {
        {
                /* TCP L1 Cache per CU */
                .cache_size = 16,
                .cache_level = 1,
                .flags = (CRAT_CACHE_FLAGS_ENABLED |
                                CRAT_CACHE_FLAGS_DATA_CACHE |
                                CRAT_CACHE_FLAGS_SIMD_CACHE),
                .num_cu_shared = 1,

        },
        {
                /* Scalar L1 Instruction Cache (in SQC module) per bank */
                .cache_size = 16,
                .cache_level = 1,
                .flags = (CRAT_CACHE_FLAGS_ENABLED |
                                CRAT_CACHE_FLAGS_INST_CACHE |
                                CRAT_CACHE_FLAGS_SIMD_CACHE),
                .num_cu_shared = 2,
        },
        {
                /* Scalar L1 Data Cache (in SQC module) per bank */
                .cache_size = 8,
                .cache_level = 1,
                .flags = (CRAT_CACHE_FLAGS_ENABLED |
                                CRAT_CACHE_FLAGS_DATA_CACHE |
                                CRAT_CACHE_FLAGS_SIMD_CACHE),
                .num_cu_shared = 2,
        },

        /* TODO: Add L2 Cache information */
};


static struct kfd_gpu_cache_info carrizo_cache_info[] = {
        {
                /* TCP L1 Cache per CU */
                .cache_size = 16,
                .cache_level = 1,
                .flags = (CRAT_CACHE_FLAGS_ENABLED |
                                CRAT_CACHE_FLAGS_DATA_CACHE |
                                CRAT_CACHE_FLAGS_SIMD_CACHE),
                .num_cu_shared = 1,
        },
        {
                /* Scalar L1 Instruction Cache (in SQC module) per bank */
                .cache_size = 8,
                .cache_level = 1,
                .flags = (CRAT_CACHE_FLAGS_ENABLED |
                                CRAT_CACHE_FLAGS_INST_CACHE |
                                CRAT_CACHE_FLAGS_SIMD_CACHE),
                .num_cu_shared = 4,
        },
        {
                /* Scalar L1 Data Cache (in SQC module) per bank. */
                .cache_size = 4,
                .cache_level = 1,
                .flags = (CRAT_CACHE_FLAGS_ENABLED |
                                CRAT_CACHE_FLAGS_DATA_CACHE |
                                CRAT_CACHE_FLAGS_SIMD_CACHE),
                .num_cu_shared = 4,
        },

        /* TODO: Add L2 Cache information */
};

/* NOTE: In future if more information is added to struct kfd_gpu_cache_info
 * the following ASICs may need a separate table.
 */
#define hawaii_cache_info kaveri_cache_info
#define tonga_cache_info carrizo_cache_info
#define fiji_cache_info  carrizo_cache_info
#define polaris10_cache_info carrizo_cache_info
#define polaris11_cache_info carrizo_cache_info
#define polaris12_cache_info carrizo_cache_info
#define vegam_cache_info carrizo_cache_info
/* TODO - check & update Vega10 cache details */
#define vega10_cache_info carrizo_cache_info
#define raven_cache_info carrizo_cache_info
#define renoir_cache_info carrizo_cache_info
/* TODO - check & update Navi10 cache details */
#define navi10_cache_info carrizo_cache_info
#define vangogh_cache_info carrizo_cache_info

static void kfd_populated_cu_info_cpu(struct kfd_topology_device *dev,
                struct crat_subtype_computeunit *cu)
{
        dev->node_props.cpu_cores_count = cu->num_cpu_cores;
        dev->node_props.cpu_core_id_base = cu->processor_id_low;
        if (cu->hsa_capability & CRAT_CU_FLAGS_IOMMU_PRESENT)
                dev->node_props.capability |= HSA_CAP_ATS_PRESENT;

        pr_debug("CU CPU: cores=%d id_base=%d\n", cu->num_cpu_cores,
                        cu->processor_id_low);
}

static void kfd_populated_cu_info_gpu(struct kfd_topology_device *dev,
                struct crat_subtype_computeunit *cu)
{
        dev->node_props.simd_id_base = cu->processor_id_low;
        dev->node_props.simd_count = cu->num_simd_cores;
        dev->node_props.lds_size_in_kb = cu->lds_size_in_kb;
        dev->node_props.max_waves_per_simd = cu->max_waves_simd;
        dev->node_props.wave_front_size = cu->wave_front_size;
        dev->node_props.array_count = cu->array_count;
        dev->node_props.cu_per_simd_array = cu->num_cu_per_array;
        dev->node_props.simd_per_cu = cu->num_simd_per_cu;
        dev->node_props.max_slots_scratch_cu = cu->max_slots_scatch_cu;
        if (cu->hsa_capability & CRAT_CU_FLAGS_HOT_PLUGGABLE)
                dev->node_props.capability |= HSA_CAP_HOT_PLUGGABLE;
        pr_debug("CU GPU: id_base=%d\n", cu->processor_id_low);
}

/* kfd_parse_subtype_cu - parse compute unit subtypes and attach it to correct
 * topology device present in the device_list
 */
static int kfd_parse_subtype_cu(struct crat_subtype_computeunit *cu,
                                struct list_head *device_list)
{
        struct kfd_topology_device *dev;

        pr_debug("Found CU entry in CRAT table with proximity_domain=%d caps=%x\n",
                        cu->proximity_domain, cu->hsa_capability);
        list_for_each_entry(dev, device_list, list) {
                if (cu->proximity_domain == dev->proximity_domain) {
                        if (cu->flags & CRAT_CU_FLAGS_CPU_PRESENT)
                                kfd_populated_cu_info_cpu(dev, cu);

                        if (cu->flags & CRAT_CU_FLAGS_GPU_PRESENT)
                                kfd_populated_cu_info_gpu(dev, cu);
                        break;
                }
        }

        return 0;
}

static struct kfd_mem_properties *
find_subtype_mem(uint32_t heap_type, uint32_t flags, uint32_t width,
                struct kfd_topology_device *dev)
{
        struct kfd_mem_properties *props;

        list_for_each_entry(props, &dev->mem_props, list) {
                if (props->heap_type == heap_type
                                && props->flags == flags
                                && props->width == width)
                        return props;
        }

        return NULL;
}
/* kfd_parse_subtype_mem - parse memory subtypes and attach it to correct
 * topology device present in the device_list
 */
static int kfd_parse_subtype_mem(struct crat_subtype_memory *mem,
                                struct list_head *device_list)
{
        struct kfd_mem_properties *props;
        struct kfd_topology_device *dev;
        uint32_t heap_type;
        uint64_t size_in_bytes;
        uint32_t flags = 0;
        uint32_t width;

        pr_debug("Found memory entry in CRAT table with proximity_domain=%d\n",
                        mem->proximity_domain);
        list_for_each_entry(dev, device_list, list) {
                if (mem->proximity_domain == dev->proximity_domain) {
                        /* We're on GPU node */
                        if (dev->node_props.cpu_cores_count == 0) {
                                /* APU */
                                if (mem->visibility_type == 0)
                                        heap_type =
                                                HSA_MEM_HEAP_TYPE_FB_PRIVATE;
                                /* dGPU */
                                else
                                        heap_type = mem->visibility_type;
                        } else
                                heap_type = HSA_MEM_HEAP_TYPE_SYSTEM;

                        if (mem->flags & CRAT_MEM_FLAGS_HOT_PLUGGABLE)
                                flags |= HSA_MEM_FLAGS_HOT_PLUGGABLE;
                        if (mem->flags & CRAT_MEM_FLAGS_NON_VOLATILE)
                                flags |= HSA_MEM_FLAGS_NON_VOLATILE;

                        size_in_bytes =
                                ((uint64_t)mem->length_high << 32) +
                                                        mem->length_low;
                        width = mem->width;

                        /* Multiple banks of the same type are aggregated into
                         * one. User mode doesn't care about multiple physical
                         * memory segments. It's managed as a single virtual
                         * heap for user mode.
                         */
                        props = find_subtype_mem(heap_type, flags, width, dev);
                        if (props) {
                                props->size_in_bytes += size_in_bytes;
                                break;
                        }

                        props = kfd_alloc_struct(props);
                        if (!props)
                                return -ENOMEM;

                        props->heap_type = heap_type;
                        props->flags = flags;
                        props->size_in_bytes = size_in_bytes;
                        props->width = width;

                        dev->node_props.mem_banks_count++;
                        list_add_tail(&props->list, &dev->mem_props);

                        break;
                }
        }

        return 0;
}

/* kfd_parse_subtype_cache - parse cache subtypes and attach it to correct
 * topology device present in the device_list
 */
static int kfd_parse_subtype_cache(struct crat_subtype_cache *cache,
                        struct list_head *device_list)
{
        struct kfd_cache_properties *props;
        struct kfd_topology_device *dev;
        uint32_t id;
        uint32_t total_num_of_cu;

        id = cache->processor_id_low;

        pr_debug("Found cache entry in CRAT table with processor_id=%d\n", id);
        list_for_each_entry(dev, device_list, list) {
                total_num_of_cu = (dev->node_props.array_count *
                                        dev->node_props.cu_per_simd_array);

                /* Cache infomration in CRAT doesn't have proximity_domain
                 * information as it is associated with a CPU core or GPU
                 * Compute Unit. So map the cache using CPU core Id or SIMD
                 * (GPU) ID.
                 * TODO: This works because currently we can safely assume that
                 *  Compute Units are parsed before caches are parsed. In
                 *  future, remove this dependency
                 */
                if ((id >= dev->node_props.cpu_core_id_base &&
                        id <= dev->node_props.cpu_core_id_base +
                                dev->node_props.cpu_cores_count) ||
                        (id >= dev->node_props.simd_id_base &&
                        id < dev->node_props.simd_id_base +
                                total_num_of_cu)) {
                        props = kfd_alloc_struct(props);
                        if (!props)
                                return -ENOMEM;

                        props->processor_id_low = id;
                        props->cache_level = cache->cache_level;
                        props->cache_size = cache->cache_size;
                        props->cacheline_size = cache->cache_line_size;
                        props->cachelines_per_tag = cache->lines_per_tag;
                        props->cache_assoc = cache->associativity;
                        props->cache_latency = cache->cache_latency;
                        memcpy(props->sibling_map, cache->sibling_map,
                                        sizeof(props->sibling_map));

                        if (cache->flags & CRAT_CACHE_FLAGS_DATA_CACHE)
                                props->cache_type |= HSA_CACHE_TYPE_DATA;
                        if (cache->flags & CRAT_CACHE_FLAGS_INST_CACHE)
                                props->cache_type |= HSA_CACHE_TYPE_INSTRUCTION;
                        if (cache->flags & CRAT_CACHE_FLAGS_CPU_CACHE)
                                props->cache_type |= HSA_CACHE_TYPE_CPU;
                        if (cache->flags & CRAT_CACHE_FLAGS_SIMD_CACHE)
                                props->cache_type |= HSA_CACHE_TYPE_HSACU;

                        dev->cache_count++;
                        dev->node_props.caches_count++;
                        list_add_tail(&props->list, &dev->cache_props);

                        break;
                }
        }

        return 0;
}

/* kfd_parse_subtype_iolink - parse iolink subtypes and attach it to correct
 * topology device present in the device_list
 */
static int kfd_parse_subtype_iolink(struct crat_subtype_iolink *iolink,
                                        struct list_head *device_list)
{
        struct kfd_iolink_properties *props = NULL, *props2;
        struct kfd_topology_device *dev, *to_dev;
        uint32_t id_from;
        uint32_t id_to;

        id_from = iolink->proximity_domain_from;
        id_to = iolink->proximity_domain_to;

        pr_debug("Found IO link entry in CRAT table with id_from=%d, id_to %d\n",
                        id_from, id_to);
        list_for_each_entry(dev, device_list, list) {
                if (id_from == dev->proximity_domain) {
                        props = kfd_alloc_struct(props);
                        if (!props)
                                return -ENOMEM;

                        props->node_from = id_from;
                        props->node_to = id_to;
                        props->ver_maj = iolink->version_major;
                        props->ver_min = iolink->version_minor;
                        props->iolink_type = iolink->io_interface_type;

                        if (props->iolink_type == CRAT_IOLINK_TYPE_PCIEXPRESS)
                                props->weight = 20;
                        else if (props->iolink_type == CRAT_IOLINK_TYPE_XGMI)
                                props->weight = 15 * iolink->num_hops_xgmi;
                        else
                                props->weight = node_distance(id_from, id_to);

                        props->min_latency = iolink->minimum_latency;
                        props->max_latency = iolink->maximum_latency;
                        props->min_bandwidth = iolink->minimum_bandwidth_mbs;
                        props->max_bandwidth = iolink->maximum_bandwidth_mbs;
                        props->rec_transfer_size =
                                        iolink->recommended_transfer_size;

                        dev->io_link_count++;
                        dev->node_props.io_links_count++;
                        list_add_tail(&props->list, &dev->io_link_props);
                        break;
                }
        }

        /* CPU topology is created before GPUs are detected, so CPU->GPU
         * links are not built at that time. If a PCIe type is discovered, it
         * means a GPU is detected and we are adding GPU->CPU to the topology.
         * At this time, also add the corresponded CPU->GPU link if GPU
         * is large bar.
         * For xGMI, we only added the link with one direction in the crat
         * table, add corresponded reversed direction link now.
         */
        if (props && (iolink->flags & CRAT_IOLINK_FLAGS_BI_DIRECTIONAL)) {
                to_dev = kfd_topology_device_by_proximity_domain(id_to);
                if (!to_dev)
                        return -ENODEV;
                /* same everything but the other direction */
                props2 = kmemdup(props, sizeof(*props2), GFP_KERNEL);
                props2->node_from = id_to;
                props2->node_to = id_from;
                props2->kobj = NULL;
                to_dev->io_link_count++;
                to_dev->node_props.io_links_count++;
                list_add_tail(&props2->list, &to_dev->io_link_props);
        }

        return 0;
}

/* kfd_parse_subtype - parse subtypes and attach it to correct topology device
 * present in the device_list
 *      @sub_type_hdr - subtype section of crat_image
 *      @device_list - list of topology devices present in this crat_image
 */
static int kfd_parse_subtype(struct crat_subtype_generic *sub_type_hdr,
                                struct list_head *device_list)
{
        struct crat_subtype_computeunit *cu;
        struct crat_subtype_memory *mem;
        struct crat_subtype_cache *cache;
        struct crat_subtype_iolink *iolink;
        int ret = 0;

        switch (sub_type_hdr->type) {
        case CRAT_SUBTYPE_COMPUTEUNIT_AFFINITY:
                cu = (struct crat_subtype_computeunit *)sub_type_hdr;
                ret = kfd_parse_subtype_cu(cu, device_list);
                break;
        case CRAT_SUBTYPE_MEMORY_AFFINITY:
                mem = (struct crat_subtype_memory *)sub_type_hdr;
                ret = kfd_parse_subtype_mem(mem, device_list);
                break;
        case CRAT_SUBTYPE_CACHE_AFFINITY:
                cache = (struct crat_subtype_cache *)sub_type_hdr;
                ret = kfd_parse_subtype_cache(cache, device_list);
                break;
        case CRAT_SUBTYPE_TLB_AFFINITY:
                /*
                 * For now, nothing to do here
                 */
                pr_debug("Found TLB entry in CRAT table (not processing)\n");
                break;
        case CRAT_SUBTYPE_CCOMPUTE_AFFINITY:
                /*
                 * For now, nothing to do here
                 */
                pr_debug("Found CCOMPUTE entry in CRAT table (not processing)\n");
                break;
        case CRAT_SUBTYPE_IOLINK_AFFINITY:
                iolink = (struct crat_subtype_iolink *)sub_type_hdr;
                ret = kfd_parse_subtype_iolink(iolink, device_list);
                break;
        default:
                pr_warn("Unknown subtype %d in CRAT\n",
                                sub_type_hdr->type);
        }

        return ret;
}

/* kfd_parse_crat_table - parse CRAT table. For each node present in CRAT
 * create a kfd_topology_device and add in to device_list. Also parse
 * CRAT subtypes and attach it to appropriate kfd_topology_device
 *      @crat_image - input image containing CRAT
 *      @device_list - [OUT] list of kfd_topology_device generated after
 *                     parsing crat_image
 *      @proximity_domain - Proximity domain of the first device in the table
 *
 *      Return - 0 if successful else -ve value
 */
int kfd_parse_crat_table(void *crat_image, struct list_head *device_list,
                         uint32_t proximity_domain)
{
        struct kfd_topology_device *top_dev = NULL;
        struct crat_subtype_generic *sub_type_hdr;
        uint16_t node_id;
        int ret = 0;
        struct crat_header *crat_table = (struct crat_header *)crat_image;
        uint16_t num_nodes;
        uint32_t image_len;

        if (!crat_image)
                return -EINVAL;

        if (!list_empty(device_list)) {
                pr_warn("Error device list should be empty\n");
                return -EINVAL;
        }

        num_nodes = crat_table->num_domains;
        image_len = crat_table->length;

        pr_debug("Parsing CRAT table with %d nodes\n", num_nodes);

        for (node_id = 0; node_id < num_nodes; node_id++) {
                top_dev = kfd_create_topology_device(device_list);
                if (!top_dev)
                        break;
                top_dev->proximity_domain = proximity_domain++;
        }

        if (!top_dev) {
                ret = -ENOMEM;
                goto err;
        }

        memcpy(top_dev->oem_id, crat_table->oem_id, CRAT_OEMID_LENGTH);
        memcpy(top_dev->oem_table_id, crat_table->oem_table_id,
                        CRAT_OEMTABLEID_LENGTH);
        top_dev->oem_revision = crat_table->oem_revision;

        sub_type_hdr = (struct crat_subtype_generic *)(crat_table+1);
        while ((char *)sub_type_hdr + sizeof(struct crat_subtype_generic) <
                        ((char *)crat_image) + image_len) {
                if (sub_type_hdr->flags & CRAT_SUBTYPE_FLAGS_ENABLED) {
                        ret = kfd_parse_subtype(sub_type_hdr, device_list);
                        if (ret)
                                break;
                }

                sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
                                sub_type_hdr->length);
        }

err:
        if (ret)
                kfd_release_topology_device_list(device_list);

        return ret;
}

/* Helper function. See kfd_fill_gpu_cache_info for parameter description */
static int fill_in_pcache(struct crat_subtype_cache *pcache,
                                struct kfd_gpu_cache_info *pcache_info,
                                struct kfd_cu_info *cu_info,
                                int mem_available,
                                int cu_bitmask,
                                int cache_type, unsigned int cu_processor_id,
                                int cu_block)
{
        unsigned int cu_sibling_map_mask;
        int first_active_cu;

        /* First check if enough memory is available */
        if (sizeof(struct crat_subtype_cache) > mem_available)
                return -ENOMEM;

        cu_sibling_map_mask = cu_bitmask;
        cu_sibling_map_mask >>= cu_block;
        cu_sibling_map_mask &=
                ((1 << pcache_info[cache_type].num_cu_shared) - 1);
        first_active_cu = ffs(cu_sibling_map_mask);

        /* CU could be inactive. In case of shared cache find the first active
         * CU. and incase of non-shared cache check if the CU is inactive. If
         * inactive active skip it
         */
        if (first_active_cu) {
                memset(pcache, 0, sizeof(struct crat_subtype_cache));
                pcache->type = CRAT_SUBTYPE_CACHE_AFFINITY;
                pcache->length = sizeof(struct crat_subtype_cache);
                pcache->flags = pcache_info[cache_type].flags;
                pcache->processor_id_low = cu_processor_id
                                         + (first_active_cu - 1);
                pcache->cache_level = pcache_info[cache_type].cache_level;
                pcache->cache_size = pcache_info[cache_type].cache_size;

                /* Sibling map is w.r.t processor_id_low, so shift out
                 * inactive CU
                 */
                cu_sibling_map_mask =
                        cu_sibling_map_mask >> (first_active_cu - 1);

                pcache->sibling_map[0] = (uint8_t)(cu_sibling_map_mask & 0xFF);
                pcache->sibling_map[1] =
                                (uint8_t)((cu_sibling_map_mask >> 8) & 0xFF);
                pcache->sibling_map[2] =
                                (uint8_t)((cu_sibling_map_mask >> 16) & 0xFF);
                pcache->sibling_map[3] =
                                (uint8_t)((cu_sibling_map_mask >> 24) & 0xFF);
                return 0;
        }
        return 1;
}

/* kfd_fill_gpu_cache_info - Fill GPU cache info using kfd_gpu_cache_info
 * tables
 *
 *      @kdev - [IN] GPU device
 *      @gpu_processor_id - [IN] GPU processor ID to which these caches
 *                          associate
 *      @available_size - [IN] Amount of memory available in pcache
 *      @cu_info - [IN] Compute Unit info obtained from KGD
 *      @pcache - [OUT] memory into which cache data is to be filled in.
 *      @size_filled - [OUT] amount of data used up in pcache.
 *      @num_of_entries - [OUT] number of caches added
 */
static int kfd_fill_gpu_cache_info(struct kfd_dev *kdev,
                        int gpu_processor_id,
                        int available_size,
                        struct kfd_cu_info *cu_info,
                        struct crat_subtype_cache *pcache,
                        int *size_filled,
                        int *num_of_entries)
{
        struct kfd_gpu_cache_info *pcache_info;
        int num_of_cache_types = 0;
        int i, j, k;
        int ct = 0;
        int mem_available = available_size;
        unsigned int cu_processor_id;
        int ret;

        switch (kdev->device_info->asic_family) {
        case CHIP_KAVERI:
                pcache_info = kaveri_cache_info;
                num_of_cache_types = ARRAY_SIZE(kaveri_cache_info);
                break;
        case CHIP_HAWAII:
                pcache_info = hawaii_cache_info;
                num_of_cache_types = ARRAY_SIZE(hawaii_cache_info);
                break;
        case CHIP_CARRIZO:
                pcache_info = carrizo_cache_info;
                num_of_cache_types = ARRAY_SIZE(carrizo_cache_info);
                break;
        case CHIP_TONGA:
                pcache_info = tonga_cache_info;
                num_of_cache_types = ARRAY_SIZE(tonga_cache_info);
                break;
        case CHIP_FIJI:
                pcache_info = fiji_cache_info;
                num_of_cache_types = ARRAY_SIZE(fiji_cache_info);
                break;
        case CHIP_POLARIS10:
                pcache_info = polaris10_cache_info;
                num_of_cache_types = ARRAY_SIZE(polaris10_cache_info);
                break;
        case CHIP_POLARIS11:
                pcache_info = polaris11_cache_info;
                num_of_cache_types = ARRAY_SIZE(polaris11_cache_info);
                break;
        case CHIP_POLARIS12:
                pcache_info = polaris12_cache_info;
                num_of_cache_types = ARRAY_SIZE(polaris12_cache_info);
                break;
        case CHIP_VEGAM:
                pcache_info = vegam_cache_info;
                num_of_cache_types = ARRAY_SIZE(vegam_cache_info);
                break;
        case CHIP_VEGA10:
        case CHIP_VEGA12:
        case CHIP_VEGA20:
        case CHIP_ARCTURUS:
                pcache_info = vega10_cache_info;
                num_of_cache_types = ARRAY_SIZE(vega10_cache_info);
                break;
        case CHIP_RAVEN:
                pcache_info = raven_cache_info;
                num_of_cache_types = ARRAY_SIZE(raven_cache_info);
                break;
        case CHIP_RENOIR:
                pcache_info = renoir_cache_info;
                num_of_cache_types = ARRAY_SIZE(renoir_cache_info);
                break;
        case CHIP_NAVI10:
        case CHIP_NAVI12:
        case CHIP_NAVI14:
        case CHIP_SIENNA_CICHLID:
        case CHIP_NAVY_FLOUNDER:
        case CHIP_DIMGREY_CAVEFISH:
                pcache_info = navi10_cache_info;
                num_of_cache_types = ARRAY_SIZE(navi10_cache_info);
                break;
        case CHIP_VANGOGH:
                pcache_info = vangogh_cache_info;
                num_of_cache_types = ARRAY_SIZE(vangogh_cache_info);
                break;
        default:
                return -EINVAL;
        }

        *size_filled = 0;
        *num_of_entries = 0;

        /* For each type of cache listed in the kfd_gpu_cache_info table,
         * go through all available Compute Units.
         * The [i,j,k] loop will
         *              if kfd_gpu_cache_info.num_cu_shared = 1
         *                      will parse through all available CU
         *              If (kfd_gpu_cache_info.num_cu_shared != 1)
         *                      then it will consider only one CU from
         *                      the shared unit
         */

        for (ct = 0; ct < num_of_cache_types; ct++) {
                cu_processor_id = gpu_processor_id;
                for (i = 0; i < cu_info->num_shader_engines; i++) {
                        for (j = 0; j < cu_info->num_shader_arrays_per_engine;
                                j++) {
                                for (k = 0; k < cu_info->num_cu_per_sh;
                                        k += pcache_info[ct].num_cu_shared) {

                                        ret = fill_in_pcache(pcache,
                                                pcache_info,
                                                cu_info,
                                                mem_available,
                                                cu_info->cu_bitmap[i % 4][j + i / 4],
                                                ct,
                                                cu_processor_id,
                                                k);

                                        if (ret < 0)
                                                break;

                                        if (!ret) {
                                                pcache++;
                                                (*num_of_entries)++;
                                                mem_available -=
                                                        sizeof(*pcache);
                                                (*size_filled) +=
                                                        sizeof(*pcache);
                                        }

                                        /* Move to next CU block */
                                        cu_processor_id +=
                                                pcache_info[ct].num_cu_shared;
                                }
                        }
                }
        }

        pr_debug("Added [%d] GPU cache entries\n", *num_of_entries);

        return 0;
}

static bool kfd_ignore_crat(void)
{
        bool ret;

        if (ignore_crat)
                return true;

#ifndef KFD_SUPPORT_IOMMU_V2
        ret = true;
#else
        ret = false;
#endif

        return ret;
}

/*
 * kfd_create_crat_image_acpi - Allocates memory for CRAT image and
 * copies CRAT from ACPI (if available).
 * NOTE: Call kfd_destroy_crat_image to free CRAT image memory
 *
 *      @crat_image: CRAT read from ACPI. If no CRAT in ACPI then
 *                   crat_image will be NULL
 *      @size: [OUT] size of crat_image
 *
 *      Return 0 if successful else return error code
 */
int kfd_create_crat_image_acpi(void **crat_image, size_t *size)
{
        struct acpi_table_header *crat_table;
        acpi_status status;
        void *pcrat_image;
        int rc = 0;

        if (!crat_image)
                return -EINVAL;

        *crat_image = NULL;

        if (kfd_ignore_crat()) {
                pr_info("CRAT table disabled by module option\n");
                return -ENODATA;
        }

        /* Fetch the CRAT table from ACPI */
        status = acpi_get_table(CRAT_SIGNATURE, 0, &crat_table);
        if (status == AE_NOT_FOUND) {
                pr_warn("CRAT table not found\n");
                return -ENODATA;
        } else if (ACPI_FAILURE(status)) {
                const char *err = acpi_format_exception(status);

                pr_err("CRAT table error: %s\n", err);
                return -EINVAL;
        }

        pcrat_image = kvmalloc(crat_table->length, GFP_KERNEL);
        if (!pcrat_image) {
                rc = -ENOMEM;
                goto out;
        }

        memcpy(pcrat_image, crat_table, crat_table->length);
        *crat_image = pcrat_image;
        *size = crat_table->length;
out:
        acpi_put_table(crat_table);
        return rc;
}

/* Memory required to create Virtual CRAT.
 * Since there is no easy way to predict the amount of memory required, the
 * following amount is allocated for GPU Virtual CRAT. This is
 * expected to cover all known conditions. But to be safe additional check
 * is put in the code to ensure we don't overwrite.
 */
#define VCRAT_SIZE_FOR_GPU      (4 * PAGE_SIZE)

/* kfd_fill_cu_for_cpu - Fill in Compute info for the given CPU NUMA node
 *
 *      @numa_node_id: CPU NUMA node id
 *      @avail_size: Available size in the memory
 *      @sub_type_hdr: Memory into which compute info will be filled in
 *
 *      Return 0 if successful else return -ve value
 */
static int kfd_fill_cu_for_cpu(int numa_node_id, int *avail_size,
                                int proximity_domain,
                                struct crat_subtype_computeunit *sub_type_hdr)
{
        const struct cpumask *cpumask;

        *avail_size -= sizeof(struct crat_subtype_computeunit);
        if (*avail_size < 0)
                return -ENOMEM;

        memset(sub_type_hdr, 0, sizeof(struct crat_subtype_computeunit));

        /* Fill in subtype header data */
        sub_type_hdr->type = CRAT_SUBTYPE_COMPUTEUNIT_AFFINITY;
        sub_type_hdr->length = sizeof(struct crat_subtype_computeunit);
        sub_type_hdr->flags = CRAT_SUBTYPE_FLAGS_ENABLED;

        cpumask = cpumask_of_node(numa_node_id);

        /* Fill in CU data */
        sub_type_hdr->flags |= CRAT_CU_FLAGS_CPU_PRESENT;
        sub_type_hdr->proximity_domain = proximity_domain;
        sub_type_hdr->processor_id_low = kfd_numa_node_to_apic_id(numa_node_id);
        if (sub_type_hdr->processor_id_low == -1)
                return -EINVAL;

        sub_type_hdr->num_cpu_cores = cpumask_weight(cpumask);

        return 0;
}

/* kfd_fill_mem_info_for_cpu - Fill in Memory info for the given CPU NUMA node
 *
 *      @numa_node_id: CPU NUMA node id
 *      @avail_size: Available size in the memory
 *      @sub_type_hdr: Memory into which compute info will be filled in
 *
 *      Return 0 if successful else return -ve value
 */
static int kfd_fill_mem_info_for_cpu(int numa_node_id, int *avail_size,
                        int proximity_domain,
                        struct crat_subtype_memory *sub_type_hdr)
{
        uint64_t mem_in_bytes = 0;
        pg_data_t *pgdat;
        int zone_type;

        *avail_size -= sizeof(struct crat_subtype_memory);
        if (*avail_size < 0)
                return -ENOMEM;

        memset(sub_type_hdr, 0, sizeof(struct crat_subtype_memory));

        /* Fill in subtype header data */
        sub_type_hdr->type = CRAT_SUBTYPE_MEMORY_AFFINITY;
        sub_type_hdr->length = sizeof(struct crat_subtype_memory);
        sub_type_hdr->flags = CRAT_SUBTYPE_FLAGS_ENABLED;

        /* Fill in Memory Subunit data */

        /* Unlike si_meminfo, si_meminfo_node is not exported. So
         * the following lines are duplicated from si_meminfo_node
         * function
         */
        pgdat = NODE_DATA(numa_node_id);
        for (zone_type = 0; zone_type < MAX_NR_ZONES; zone_type++)
                mem_in_bytes += zone_managed_pages(&pgdat->node_zones[zone_type]);
        mem_in_bytes <<= PAGE_SHIFT;

        sub_type_hdr->length_low = lower_32_bits(mem_in_bytes);
        sub_type_hdr->length_high = upper_32_bits(mem_in_bytes);
        sub_type_hdr->proximity_domain = proximity_domain;

        return 0;
}

#ifdef CONFIG_X86_64
static int kfd_fill_iolink_info_for_cpu(int numa_node_id, int *avail_size,
                                uint32_t *num_entries,
                                struct crat_subtype_iolink *sub_type_hdr)
{
        int nid;
        struct cpuinfo_x86 *c = &cpu_data(0);
        uint8_t link_type;

        if (c->x86_vendor == X86_VENDOR_AMD)
                link_type = CRAT_IOLINK_TYPE_HYPERTRANSPORT;
        else
                link_type = CRAT_IOLINK_TYPE_QPI_1_1;

        *num_entries = 0;

        /* Create IO links from this node to other CPU nodes */
        for_each_online_node(nid) {
                if (nid == numa_node_id) /* node itself */
                        continue;

                *avail_size -= sizeof(struct crat_subtype_iolink);
                if (*avail_size < 0)
                        return -ENOMEM;

                memset(sub_type_hdr, 0, sizeof(struct crat_subtype_iolink));

                /* Fill in subtype header data */
                sub_type_hdr->type = CRAT_SUBTYPE_IOLINK_AFFINITY;
                sub_type_hdr->length = sizeof(struct crat_subtype_iolink);
                sub_type_hdr->flags = CRAT_SUBTYPE_FLAGS_ENABLED;

                /* Fill in IO link data */
                sub_type_hdr->proximity_domain_from = numa_node_id;
                sub_type_hdr->proximity_domain_to = nid;
                sub_type_hdr->io_interface_type = link_type;

                (*num_entries)++;
                sub_type_hdr++;
        }

        return 0;
}
#endif

/* kfd_create_vcrat_image_cpu - Create Virtual CRAT for CPU
 *
 *      @pcrat_image: Fill in VCRAT for CPU
 *      @size:  [IN] allocated size of crat_image.
 *              [OUT] actual size of data filled in crat_image
 */
static int kfd_create_vcrat_image_cpu(void *pcrat_image, size_t *size)
{
        struct crat_header *crat_table = (struct crat_header *)pcrat_image;
        struct acpi_table_header *acpi_table;
        acpi_status status;
        struct crat_subtype_generic *sub_type_hdr;
        int avail_size = *size;
        int numa_node_id;
#ifdef CONFIG_X86_64
        uint32_t entries = 0;
#endif
        int ret = 0;

        if (!pcrat_image)
                return -EINVAL;

        /* Fill in CRAT Header.
         * Modify length and total_entries as subunits are added.
         */
        avail_size -= sizeof(struct crat_header);
        if (avail_size < 0)
                return -ENOMEM;

        memset(crat_table, 0, sizeof(struct crat_header));
        memcpy(&crat_table->signature, CRAT_SIGNATURE,
                        sizeof(crat_table->signature));
        crat_table->length = sizeof(struct crat_header);

        status = acpi_get_table("DSDT", 0, &acpi_table);
        if (status != AE_OK)
                pr_warn("DSDT table not found for OEM information\n");
        else {
                crat_table->oem_revision = acpi_table->revision;
                memcpy(crat_table->oem_id, acpi_table->oem_id,
                                CRAT_OEMID_LENGTH);
                memcpy(crat_table->oem_table_id, acpi_table->oem_table_id,
                                CRAT_OEMTABLEID_LENGTH);

                acpi_put_table(acpi_table);
        }
        crat_table->total_entries = 0;
        crat_table->num_domains = 0;

        sub_type_hdr = (struct crat_subtype_generic *)(crat_table+1);

        for_each_online_node(numa_node_id) {
                if (kfd_numa_node_to_apic_id(numa_node_id) == -1)
                        continue;

                /* Fill in Subtype: Compute Unit */
                ret = kfd_fill_cu_for_cpu(numa_node_id, &avail_size,
                        crat_table->num_domains,
                        (struct crat_subtype_computeunit *)sub_type_hdr);
                if (ret < 0)
                        return ret;
                crat_table->length += sub_type_hdr->length;
                crat_table->total_entries++;

                sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
                        sub_type_hdr->length);

                /* Fill in Subtype: Memory */
                ret = kfd_fill_mem_info_for_cpu(numa_node_id, &avail_size,
                        crat_table->num_domains,
                        (struct crat_subtype_memory *)sub_type_hdr);
                if (ret < 0)
                        return ret;
                crat_table->length += sub_type_hdr->length;
                crat_table->total_entries++;

                sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
                        sub_type_hdr->length);

                /* Fill in Subtype: IO Link */
#ifdef CONFIG_X86_64
                ret = kfd_fill_iolink_info_for_cpu(numa_node_id, &avail_size,
                                &entries,
                                (struct crat_subtype_iolink *)sub_type_hdr);
                if (ret < 0)
                        return ret;

                if (entries) {
                        crat_table->length += (sub_type_hdr->length * entries);
                        crat_table->total_entries += entries;

                        sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
                                        sub_type_hdr->length * entries);
                }
#else
                pr_info("IO link not available for non x86 platforms\n");
#endif

                crat_table->num_domains++;
        }

        /* TODO: Add cache Subtype for CPU.
         * Currently, CPU cache information is available in function
         * detect_cache_attributes(cpu) defined in the file
         * ./arch/x86/kernel/cpu/intel_cacheinfo.c. This function is not
         * exported and to get the same information the code needs to be
         * duplicated.
         */

        *size = crat_table->length;
        pr_info("Virtual CRAT table created for CPU\n");

        return 0;
}

static int kfd_fill_gpu_memory_affinity(int *avail_size,
                struct kfd_dev *kdev, uint8_t type, uint64_t size,
                struct crat_subtype_memory *sub_type_hdr,
                uint32_t proximity_domain,
                const struct kfd_local_mem_info *local_mem_info)
{
        *avail_size -= sizeof(struct crat_subtype_memory);
        if (*avail_size < 0)
                return -ENOMEM;

        memset((void *)sub_type_hdr, 0, sizeof(struct crat_subtype_memory));
        sub_type_hdr->type = CRAT_SUBTYPE_MEMORY_AFFINITY;
        sub_type_hdr->length = sizeof(struct crat_subtype_memory);
        sub_type_hdr->flags |= CRAT_SUBTYPE_FLAGS_ENABLED;

        sub_type_hdr->proximity_domain = proximity_domain;

        pr_debug("Fill gpu memory affinity - type 0x%x size 0x%llx\n",
                        type, size);

        sub_type_hdr->length_low = lower_32_bits(size);
        sub_type_hdr->length_high = upper_32_bits(size);

        sub_type_hdr->width = local_mem_info->vram_width;
        sub_type_hdr->visibility_type = type;

        return 0;
}

/* kfd_fill_gpu_direct_io_link - Fill in direct io link from GPU
 * to its NUMA node
 *      @avail_size: Available size in the memory
 *      @kdev - [IN] GPU device
 *      @sub_type_hdr: Memory into which io link info will be filled in
 *      @proximity_domain - proximity domain of the GPU node
 *
 *      Return 0 if successful else return -ve value
 */
static int kfd_fill_gpu_direct_io_link_to_cpu(int *avail_size,
                        struct kfd_dev *kdev,
                        struct crat_subtype_iolink *sub_type_hdr,
                        uint32_t proximity_domain)
{
        *avail_size -= sizeof(struct crat_subtype_iolink);
        if (*avail_size < 0)
                return -ENOMEM;

        memset((void *)sub_type_hdr, 0, sizeof(struct crat_subtype_iolink));

        /* Fill in subtype header data */
        sub_type_hdr->type = CRAT_SUBTYPE_IOLINK_AFFINITY;
        sub_type_hdr->length = sizeof(struct crat_subtype_iolink);
        sub_type_hdr->flags |= CRAT_SUBTYPE_FLAGS_ENABLED;
        if (kfd_dev_is_large_bar(kdev))
                sub_type_hdr->flags |= CRAT_IOLINK_FLAGS_BI_DIRECTIONAL;

        /* Fill in IOLINK subtype.
         * TODO: Fill-in other fields of iolink subtype
         */
        sub_type_hdr->io_interface_type = CRAT_IOLINK_TYPE_PCIEXPRESS;
        sub_type_hdr->proximity_domain_from = proximity_domain;
#ifdef CONFIG_NUMA
        if (kdev->pdev->dev.numa_node == NUMA_NO_NODE)
                sub_type_hdr->proximity_domain_to = 0;
        else
                sub_type_hdr->proximity_domain_to = kdev->pdev->dev.numa_node;
#else
        sub_type_hdr->proximity_domain_to = 0;
#endif
        return 0;
}

static int kfd_fill_gpu_xgmi_link_to_gpu(int *avail_size,
                        struct kfd_dev *kdev,
                        struct kfd_dev *peer_kdev,
                        struct crat_subtype_iolink *sub_type_hdr,
                        uint32_t proximity_domain_from,
                        uint32_t proximity_domain_to)
{
        *avail_size -= sizeof(struct crat_subtype_iolink);
        if (*avail_size < 0)
                return -ENOMEM;

        memset((void *)sub_type_hdr, 0, sizeof(struct crat_subtype_iolink));

        sub_type_hdr->type = CRAT_SUBTYPE_IOLINK_AFFINITY;
        sub_type_hdr->length = sizeof(struct crat_subtype_iolink);
        sub_type_hdr->flags |= CRAT_SUBTYPE_FLAGS_ENABLED |
                               CRAT_IOLINK_FLAGS_BI_DIRECTIONAL;

        sub_type_hdr->io_interface_type = CRAT_IOLINK_TYPE_XGMI;
        sub_type_hdr->proximity_domain_from = proximity_domain_from;
        sub_type_hdr->proximity_domain_to = proximity_domain_to;
        sub_type_hdr->num_hops_xgmi =
                amdgpu_amdkfd_get_xgmi_hops_count(kdev->kgd, peer_kdev->kgd);
        return 0;
}

/* kfd_create_vcrat_image_gpu - Create Virtual CRAT for CPU
 *
 *      @pcrat_image: Fill in VCRAT for GPU
 *      @size:  [IN] allocated size of crat_image.
 *              [OUT] actual size of data filled in crat_image
 */
static int kfd_create_vcrat_image_gpu(void *pcrat_image,
                                      size_t *size, struct kfd_dev *kdev,
                                      uint32_t proximity_domain)
{
        struct crat_header *crat_table = (struct crat_header *)pcrat_image;
        struct crat_subtype_generic *sub_type_hdr;
        struct kfd_local_mem_info local_mem_info;
        struct kfd_topology_device *peer_dev;
        struct crat_subtype_computeunit *cu;
        struct kfd_cu_info cu_info;
        int avail_size = *size;
        uint32_t total_num_of_cu;
        int num_of_cache_entries = 0;
        int cache_mem_filled = 0;
        uint32_t nid = 0;
        int ret = 0;

        if (!pcrat_image || avail_size < VCRAT_SIZE_FOR_GPU)
                return -EINVAL;

        /* Fill the CRAT Header.
         * Modify length and total_entries as subunits are added.
         */
        avail_size -= sizeof(struct crat_header);
        if (avail_size < 0)
                return -ENOMEM;

        memset(crat_table, 0, sizeof(struct crat_header));

        memcpy(&crat_table->signature, CRAT_SIGNATURE,
                        sizeof(crat_table->signature));
        /* Change length as we add more subtypes*/
        crat_table->length = sizeof(struct crat_header);
        crat_table->num_domains = 1;
        crat_table->total_entries = 0;

        /* Fill in Subtype: Compute Unit
         * First fill in the sub type header and then sub type data
         */
        avail_size -= sizeof(struct crat_subtype_computeunit);
        if (avail_size < 0)
                return -ENOMEM;

        sub_type_hdr = (struct crat_subtype_generic *)(crat_table + 1);
        memset(sub_type_hdr, 0, sizeof(struct crat_subtype_computeunit));

        sub_type_hdr->type = CRAT_SUBTYPE_COMPUTEUNIT_AFFINITY;
        sub_type_hdr->length = sizeof(struct crat_subtype_computeunit);
        sub_type_hdr->flags = CRAT_SUBTYPE_FLAGS_ENABLED;

        /* Fill CU subtype data */
        cu = (struct crat_subtype_computeunit *)sub_type_hdr;
        cu->flags |= CRAT_CU_FLAGS_GPU_PRESENT;
        cu->proximity_domain = proximity_domain;

        amdgpu_amdkfd_get_cu_info(kdev->kgd, &cu_info);
        cu->num_simd_per_cu = cu_info.simd_per_cu;
        cu->num_simd_cores = cu_info.simd_per_cu * cu_info.cu_active_number;
        cu->max_waves_simd = cu_info.max_waves_per_simd;

        cu->wave_front_size = cu_info.wave_front_size;
        cu->array_count = cu_info.num_shader_arrays_per_engine *
                cu_info.num_shader_engines;
        total_num_of_cu = (cu->array_count * cu_info.num_cu_per_sh);
        cu->processor_id_low = get_and_inc_gpu_processor_id(total_num_of_cu);
        cu->num_cu_per_array = cu_info.num_cu_per_sh;
        cu->max_slots_scatch_cu = cu_info.max_scratch_slots_per_cu;
        cu->num_banks = cu_info.num_shader_engines;
        cu->lds_size_in_kb = cu_info.lds_size;

        cu->hsa_capability = 0;

        /* Check if this node supports IOMMU. During parsing this flag will
         * translate to HSA_CAP_ATS_PRESENT
         */
        if (!kfd_iommu_check_device(kdev))
                cu->hsa_capability |= CRAT_CU_FLAGS_IOMMU_PRESENT;

        crat_table->length += sub_type_hdr->length;
        crat_table->total_entries++;

        /* Fill in Subtype: Memory. Only on systems with large BAR (no
         * private FB), report memory as public. On other systems
         * report the total FB size (public+private) as a single
         * private heap.
         */
        amdgpu_amdkfd_get_local_mem_info(kdev->kgd, &local_mem_info);
        sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
                        sub_type_hdr->length);

        if (debug_largebar)
                local_mem_info.local_mem_size_private = 0;

        if (local_mem_info.local_mem_size_private == 0)
                ret = kfd_fill_gpu_memory_affinity(&avail_size,
                                kdev, HSA_MEM_HEAP_TYPE_FB_PUBLIC,
                                local_mem_info.local_mem_size_public,
                                (struct crat_subtype_memory *)sub_type_hdr,
                                proximity_domain,
                                &local_mem_info);
        else
                ret = kfd_fill_gpu_memory_affinity(&avail_size,
                                kdev, HSA_MEM_HEAP_TYPE_FB_PRIVATE,
                                local_mem_info.local_mem_size_public +
                                local_mem_info.local_mem_size_private,
                                (struct crat_subtype_memory *)sub_type_hdr,
                                proximity_domain,
                                &local_mem_info);
        if (ret < 0)
                return ret;

        crat_table->length += sizeof(struct crat_subtype_memory);
        crat_table->total_entries++;

        /* TODO: Fill in cache information. This information is NOT readily
         * available in KGD
         */
        sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
                sub_type_hdr->length);
        ret = kfd_fill_gpu_cache_info(kdev, cu->processor_id_low,
                                avail_size,
                                &cu_info,
                                (struct crat_subtype_cache *)sub_type_hdr,
                                &cache_mem_filled,
                                &num_of_cache_entries);

        if (ret < 0)
                return ret;

        crat_table->length += cache_mem_filled;
        crat_table->total_entries += num_of_cache_entries;
        avail_size -= cache_mem_filled;

        /* Fill in Subtype: IO_LINKS
         *  Only direct links are added here which is Link from GPU to
         *  to its NUMA node. Indirect links are added by userspace.
         */
        sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
                cache_mem_filled);
        ret = kfd_fill_gpu_direct_io_link_to_cpu(&avail_size, kdev,
                (struct crat_subtype_iolink *)sub_type_hdr, proximity_domain);

        if (ret < 0)
                return ret;

        crat_table->length += sub_type_hdr->length;
        crat_table->total_entries++;


        /* Fill in Subtype: IO_LINKS
         * Direct links from GPU to other GPUs through xGMI.
         * We will loop GPUs that already be processed (with lower value
         * of proximity_domain), add the link for the GPUs with same
         * hive id (from this GPU to other GPU) . The reversed iolink
         * (from other GPU to this GPU) will be added
         * in kfd_parse_subtype_iolink.
         */
        if (kdev->hive_id) {
                for (nid = 0; nid < proximity_domain; ++nid) {
                        peer_dev = kfd_topology_device_by_proximity_domain(nid);
                        if (!peer_dev->gpu)
                                continue;
                        if (peer_dev->gpu->hive_id != kdev->hive_id)
                                continue;
                        sub_type_hdr = (typeof(sub_type_hdr))(
                                (char *)sub_type_hdr +
                                sizeof(struct crat_subtype_iolink));
                        ret = kfd_fill_gpu_xgmi_link_to_gpu(
                                &avail_size, kdev, peer_dev->gpu,
                                (struct crat_subtype_iolink *)sub_type_hdr,
                                proximity_domain, nid);
                        if (ret < 0)
                                return ret;
                        crat_table->length += sub_type_hdr->length;
                        crat_table->total_entries++;
                }
        }
        *size = crat_table->length;
        pr_info("Virtual CRAT table created for GPU\n");

        return ret;
}

/* kfd_create_crat_image_virtual - Allocates memory for CRAT image and
 *              creates a Virtual CRAT (VCRAT) image
 *
 * NOTE: Call kfd_destroy_crat_image to free CRAT image memory
 *
 *      @crat_image: VCRAT image created because ACPI does not have a
 *                   CRAT for this device
 *      @size: [OUT] size of virtual crat_image
 *      @flags: COMPUTE_UNIT_CPU - Create VCRAT for CPU device
 *              COMPUTE_UNIT_GPU - Create VCRAT for GPU
 *              (COMPUTE_UNIT_CPU | COMPUTE_UNIT_GPU) - Create VCRAT for APU
 *                      -- this option is not currently implemented.
 *                      The assumption is that all AMD APUs will have CRAT
 *      @kdev: Valid kfd_device required if flags contain COMPUTE_UNIT_GPU
 *
 *      Return 0 if successful else return -ve value
 */
int kfd_create_crat_image_virtual(void **crat_image, size_t *size,
                                  int flags, struct kfd_dev *kdev,
                                  uint32_t proximity_domain)
{
        void *pcrat_image = NULL;
        int ret = 0, num_nodes;
        size_t dyn_size;

        if (!crat_image)
                return -EINVAL;

        *crat_image = NULL;

        /* Allocate the CPU Virtual CRAT size based on the number of online
         * nodes. Allocate VCRAT_SIZE_FOR_GPU for GPU virtual CRAT image.
         * This should cover all the current conditions. A check is put not
         * to overwrite beyond allocated size for GPUs
         */
        switch (flags) {
        case COMPUTE_UNIT_CPU:
                num_nodes = num_online_nodes();
                dyn_size = sizeof(struct crat_header) +
                        num_nodes * (sizeof(struct crat_subtype_computeunit) +
                        sizeof(struct crat_subtype_memory) +
                        (num_nodes - 1) * sizeof(struct crat_subtype_iolink));
                pcrat_image = kvmalloc(dyn_size, GFP_KERNEL);
                if (!pcrat_image)
                        return -ENOMEM;
                *size = dyn_size;
                pr_debug("CRAT size is %ld", dyn_size);
                ret = kfd_create_vcrat_image_cpu(pcrat_image, size);
                break;
        case COMPUTE_UNIT_GPU:
                if (!kdev)
                        return -EINVAL;
                pcrat_image = kvmalloc(VCRAT_SIZE_FOR_GPU, GFP_KERNEL);
                if (!pcrat_image)
                        return -ENOMEM;
                *size = VCRAT_SIZE_FOR_GPU;
                ret = kfd_create_vcrat_image_gpu(pcrat_image, size, kdev,
                                                 proximity_domain);
                break;
        case (COMPUTE_UNIT_CPU | COMPUTE_UNIT_GPU):
                /* TODO: */
                ret = -EINVAL;
                pr_err("VCRAT not implemented for APU\n");
                break;
        default:
                ret = -EINVAL;
        }

        if (!ret)
                *crat_image = pcrat_image;
        else
                kvfree(pcrat_image);

        return ret;
}


/* kfd_destroy_crat_image
 *
 *      @crat_image: [IN] - crat_image from kfd_create_crat_image_xxx(..)
 *
 */
void kfd_destroy_crat_image(void *crat_image)
{
        kvfree(crat_image);
}