1
2
3menuconfig RC_CORE
4 tristate "Remote Controller support"
5 depends on INPUT
6 help
7 Enable support for Remote Controllers on Linux. This is
8 needed in order to support several video capture adapters,
9 standalone IR receivers/transmitters, and RF receivers.
10
11 Enable this option if you have a video capture board even
12 if you don't need IR, as otherwise, you may not be able to
13 compile the driver for your adapter.
14
15 Say Y when you have a TV or an IR device.
16
17if RC_CORE
18source "drivers/media/rc/keymaps/Kconfig"
19
20config LIRC
21 bool "LIRC user interface"
22 depends on RC_CORE
23 help
24 Enable this option to enable the Linux Infrared Remote
25 Control user interface (e.g. /dev/lirc*). This interface
26 passes raw IR to and from userspace, which is needed for
27 IR transmitting (aka "blasting") and for the lirc daemon.
28
29config BPF_LIRC_MODE2
30 bool "Support for eBPF programs attached to lirc devices"
31 depends on BPF_SYSCALL
32 depends on RC_CORE=y
33 depends on LIRC
34 help
35 Allow attaching eBPF programs to a lirc device using the bpf(2)
36 syscall command BPF_PROG_ATTACH. This is supported for raw IR
37 receivers.
38
39 These eBPF programs can be used to decode IR into scancodes, for
40 IR protocols not supported by the kernel decoders.
41
42menuconfig RC_DECODERS
43 bool "Remote controller decoders"
44 depends on RC_CORE
45
46if RC_DECODERS
47config IR_NEC_DECODER
48 tristate "Enable IR raw decoder for the NEC protocol"
49 depends on RC_CORE
50 select BITREVERSE
51
52 help
53 Enable this option if you have IR with NEC protocol, and
54 if the IR is decoded in software
55
56config IR_RC5_DECODER
57 tristate "Enable IR raw decoder for the RC-5 protocol"
58 depends on RC_CORE
59 select BITREVERSE
60
61 help
62 Enable this option if you have IR with RC-5 protocol, and
63 if the IR is decoded in software
64
65config IR_RC6_DECODER
66 tristate "Enable IR raw decoder for the RC6 protocol"
67 depends on RC_CORE
68 select BITREVERSE
69
70 help
71 Enable this option if you have an infrared remote control which
72 uses the RC6 protocol, and you need software decoding support.
73
74config IR_JVC_DECODER
75 tristate "Enable IR raw decoder for the JVC protocol"
76 depends on RC_CORE
77 select BITREVERSE
78
79 help
80 Enable this option if you have an infrared remote control which
81 uses the JVC protocol, and you need software decoding support.
82
83config IR_SONY_DECODER
84 tristate "Enable IR raw decoder for the Sony protocol"
85 depends on RC_CORE
86 select BITREVERSE
87
88 help
89 Enable this option if you have an infrared remote control which
90 uses the Sony protocol, and you need software decoding support.
91
92config IR_SANYO_DECODER
93 tristate "Enable IR raw decoder for the Sanyo protocol"
94 depends on RC_CORE
95 select BITREVERSE
96
97 help
98 Enable this option if you have an infrared remote control which
99 uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes),
100 and you need software decoding support.
101
102config IR_SHARP_DECODER
103 tristate "Enable IR raw decoder for the Sharp protocol"
104 depends on RC_CORE
105 select BITREVERSE
106
107 help
108 Enable this option if you have an infrared remote control which
109 uses the Sharp protocol (Sharp, Denon), and you need software
110 decoding support.
111
112config IR_MCE_KBD_DECODER
113 tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
114 depends on RC_CORE
115 select BITREVERSE
116
117 help
118 Enable this option if you have a Microsoft Remote Keyboard for
119 Windows Media Center Edition, which you would like to use with
120 a raw IR receiver in your system.
121
122config IR_XMP_DECODER
123 tristate "Enable IR raw decoder for the XMP protocol"
124 depends on RC_CORE
125 select BITREVERSE
126
127 help
128 Enable this option if you have IR with XMP protocol, and
129 if the IR is decoded in software
130
131config IR_IMON_DECODER
132 tristate "Enable IR raw decoder for the iMON protocol"
133 depends on RC_CORE
134 help
135 Enable this option if you have iMON PAD or Antec Veris infrared
136 remote control and you would like to use it with a raw IR
137 receiver, or if you wish to use an encoder to transmit this IR.
138
139config IR_RCMM_DECODER
140 tristate "Enable IR raw decoder for the RC-MM protocol"
141 depends on RC_CORE
142 help
143 Enable this option when you have IR with RC-MM protocol, and
144 you need the software decoder. The driver supports 12,
145 24 and 32 bits RC-MM variants. You can enable or disable the
146 different modes using the following RC protocol keywords:
147 'rc-mm-12', 'rc-mm-24' and 'rc-mm-32'.
148
149 To compile this driver as a module, choose M here: the module
150 will be called ir-rcmm-decoder.
151
152endif
153
154menuconfig RC_DEVICES
155 bool "Remote Controller devices"
156 depends on RC_CORE
157
158if RC_DEVICES
159
160config RC_ATI_REMOTE
161 tristate "ATI / X10 based USB RF remote controls"
162 depends on USB_ARCH_HAS_HCD
163 depends on RC_CORE
164 select USB
165 help
166 Say Y here if you want to use an X10 based USB remote control.
167 These are RF remotes with USB receivers.
168
169 Such devices include the ATI remote that comes with many of ATI's
170 All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote,
171 Medion RF remote, and SnapStream FireFly remote.
172
173 This driver provides mouse pointer, left and right mouse buttons,
174 and maps all the other remote buttons to keypress events.
175
176 To compile this driver as a module, choose M here: the module will be
177 called ati_remote.
178
179config IR_ENE
180 tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
181 depends on PNP || COMPILE_TEST
182 depends on RC_CORE
183 help
184 Say Y here to enable support for integrated infrared receiver
185 /transceiver made by ENE.
186
187 You can see if you have it by looking at lspnp output.
188 Output should include ENE0100 ENE0200 or something similar.
189
190 To compile this driver as a module, choose M here: the
191 module will be called ene_ir.
192
193config IR_HIX5HD2
194 tristate "Hisilicon hix5hd2 IR remote control"
195 depends on RC_CORE
196 depends on OF || COMPILE_TEST
197 help
198 Say Y here if you want to use hisilicon hix5hd2 remote control.
199 To compile this driver as a module, choose M here: the module will be
200 called ir-hix5hd2.
201
202 If you're not sure, select N here
203
204config IR_IMON
205 tristate "SoundGraph iMON Receiver and Display"
206 depends on USB_ARCH_HAS_HCD
207 depends on RC_CORE
208 select USB
209 help
210 Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
211 IR Receiver and/or LCD/VFD/VGA display.
212
213 To compile this driver as a module, choose M here: the
214 module will be called imon.
215
216config IR_IMON_RAW
217 tristate "SoundGraph iMON Receiver (early raw IR models)"
218 depends on USB_ARCH_HAS_HCD
219 depends on RC_CORE
220 select USB
221 help
222 Say Y here if you want to use a SoundGraph iMON IR Receiver,
223 early raw models.
224
225 To compile this driver as a module, choose M here: the
226 module will be called imon_raw.
227
228config IR_MCEUSB
229 tristate "Windows Media Center Ed. eHome Infrared Transceiver"
230 depends on USB_ARCH_HAS_HCD
231 depends on RC_CORE
232 select USB
233 help
234 Say Y here if you want to use a Windows Media Center Edition
235 eHome Infrared Transceiver.
236
237 To compile this driver as a module, choose M here: the
238 module will be called mceusb.
239
240config IR_ITE_CIR
241 tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
242 depends on PNP || COMPILE_TEST
243 depends on RC_CORE
244 help
245 Say Y here to enable support for integrated infrared receivers
246 /transceivers made by ITE Tech Inc. These are found in
247 several ASUS devices, like the ASUS Digimatrix or the ASUS
248 EEEBox 1501U.
249
250 To compile this driver as a module, choose M here: the
251 module will be called ite-cir.
252
253config IR_FINTEK
254 tristate "Fintek Consumer Infrared Transceiver"
255 depends on PNP || COMPILE_TEST
256 depends on RC_CORE
257 help
258 Say Y here to enable support for integrated infrared receiver
259 /transceiver made by Fintek. This chip is found on assorted
260 Jetway motherboards (and of course, possibly others).
261
262 To compile this driver as a module, choose M here: the
263 module will be called fintek-cir.
264
265config IR_MESON
266 tristate "Amlogic Meson IR remote receiver"
267 depends on RC_CORE
268 depends on ARCH_MESON || COMPILE_TEST
269 help
270 Say Y if you want to use the IR remote receiver available
271 on Amlogic Meson SoCs.
272
273 To compile this driver as a module, choose M here: the
274 module will be called meson-ir.
275
276config IR_MTK
277 tristate "Mediatek IR remote receiver"
278 depends on RC_CORE
279 depends on ARCH_MEDIATEK || COMPILE_TEST
280 help
281 Say Y if you want to use the IR remote receiver available
282 on Mediatek SoCs.
283
284 To compile this driver as a module, choose M here: the
285 module will be called mtk-cir.
286
287config IR_NUVOTON
288 tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
289 depends on PNP || COMPILE_TEST
290 depends on RC_CORE
291 help
292 Say Y here to enable support for integrated infrared receiver
293 /transceiver made by Nuvoton (formerly Winbond). This chip is
294 found in the ASRock ION 330HT, as well as assorted Intel
295 DP55-series motherboards (and of course, possibly others).
296
297 To compile this driver as a module, choose M here: the
298 module will be called nuvoton-cir.
299
300config IR_REDRAT3
301 tristate "RedRat3 IR Transceiver"
302 depends on USB_ARCH_HAS_HCD
303 depends on RC_CORE
304 select NEW_LEDS
305 select LEDS_CLASS
306 select USB
307 help
308 Say Y here if you want to use a RedRat3 Infrared Transceiver.
309
310 To compile this driver as a module, choose M here: the
311 module will be called redrat3.
312
313config IR_SPI
314 tristate "SPI connected IR LED"
315 depends on SPI && LIRC
316 depends on OF || COMPILE_TEST
317 help
318 Say Y if you want to use an IR LED connected through SPI bus.
319
320 To compile this driver as a module, choose M here: the module will be
321 called ir-spi.
322
323config IR_STREAMZAP
324 tristate "Streamzap PC Remote IR Receiver"
325 depends on USB_ARCH_HAS_HCD
326 depends on RC_CORE
327 select USB
328 help
329 Say Y here if you want to use a Streamzap PC Remote
330 Infrared Receiver.
331
332 To compile this driver as a module, choose M here: the
333 module will be called streamzap.
334
335config IR_WINBOND_CIR
336 tristate "Winbond IR remote control"
337 depends on (X86 && PNP) || COMPILE_TEST
338 depends on RC_CORE
339 select NEW_LEDS
340 select LEDS_CLASS
341 select BITREVERSE
342 help
343 Say Y here if you want to use the IR remote functionality found
344 in some Winbond SuperI/O chips. Currently only the WPCD376I
345 chip is supported (included in some Intel Media series
346 motherboards).
347
348 To compile this driver as a module, choose M here: the module will
349 be called winbond_cir.
350
351config IR_IGORPLUGUSB
352 tristate "IgorPlug-USB IR Receiver"
353 depends on USB_ARCH_HAS_HCD
354 depends on RC_CORE
355 select USB
356 help
357 Say Y here if you want to use the IgorPlug-USB IR Receiver by
358 Igor Cesko. This device is included on the Fit-PC2.
359
360 Note that this device can only record bursts of 36 IR pulses and
361 spaces, which is not enough for the NEC, Sanyo and RC-6 protocol.
362
363 To compile this driver as a module, choose M here: the module will
364 be called igorplugusb.
365
366config IR_IGUANA
367 tristate "IguanaWorks USB IR Transceiver"
368 depends on USB_ARCH_HAS_HCD
369 depends on RC_CORE
370 select USB
371 help
372 Say Y here if you want to use the IguanaWorks USB IR Transceiver.
373 Both infrared receive and send are supported. If you want to
374 change the ID or the pin config, use the user space driver from
375 IguanaWorks.
376
377 Only firmware 0x0205 and later is supported.
378
379 To compile this driver as a module, choose M here: the module will
380 be called iguanair.
381
382config IR_TTUSBIR
383 tristate "TechnoTrend USB IR Receiver"
384 depends on USB_ARCH_HAS_HCD
385 depends on RC_CORE
386 select USB
387 select NEW_LEDS
388 select LEDS_CLASS
389 help
390 Say Y here if you want to use the TechnoTrend USB IR Receiver. The
391 driver can control the led.
392
393 To compile this driver as a module, choose M here: the module will
394 be called ttusbir.
395
396config IR_RX51
397 tristate "Nokia N900 IR transmitter diode"
398 depends on (OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS || COMPILE_TEST) && RC_CORE
399 help
400 Say Y or M here if you want to enable support for the IR
401 transmitter diode built in the Nokia N900 (RX51) device.
402
403 The driver uses omap DM timers for generating the carrier
404 wave and pulses.
405
406source "drivers/media/rc/img-ir/Kconfig"
407
408config RC_LOOPBACK
409 tristate "Remote Control Loopback Driver"
410 depends on RC_CORE
411 help
412 Say Y here if you want support for the remote control loopback
413 driver which allows TX data to be sent back as RX data.
414 This is mostly useful for debugging purposes.
415
416 If you're not sure, select N here.
417
418 To compile this driver as a module, choose M here: the module will
419 be called rc_loopback.
420
421config IR_GPIO_CIR
422 tristate "GPIO IR remote control"
423 depends on RC_CORE
424 depends on (OF && GPIOLIB) || COMPILE_TEST
425 help
426 Say Y if you want to use GPIO based IR Receiver.
427
428 To compile this driver as a module, choose M here: the module will
429 be called gpio-ir-recv.
430
431config IR_GPIO_TX
432 tristate "GPIO IR Bit Banging Transmitter"
433 depends on RC_CORE
434 depends on LIRC
435 depends on (OF && GPIOLIB) || COMPILE_TEST
436 help
437 Say Y if you want to a GPIO based IR transmitter. This is a
438 bit banging driver.
439
440 To compile this driver as a module, choose M here: the module will
441 be called gpio-ir-tx.
442
443config IR_PWM_TX
444 tristate "PWM IR transmitter"
445 depends on RC_CORE
446 depends on LIRC
447 depends on PWM
448 depends on OF || COMPILE_TEST
449 help
450 Say Y if you want to use a PWM based IR transmitter. This is
451 more power efficient than the bit banging gpio driver.
452
453 To compile this driver as a module, choose M here: the module will
454 be called pwm-ir-tx.
455
456config RC_ST
457 tristate "ST remote control receiver"
458 depends on RC_CORE
459 depends on ARCH_STI || COMPILE_TEST
460 help
461 Say Y here if you want support for ST remote control driver
462 which allows both IR and UHF RX.
463 The driver passes raw pulse and space information to the LIRC decoder.
464
465 If you're not sure, select N here.
466
467config IR_SUNXI
468 tristate "SUNXI IR remote control"
469 depends on RC_CORE
470 depends on ARCH_SUNXI || COMPILE_TEST
471 help
472 Say Y if you want to use sunXi internal IR Controller
473
474 To compile this driver as a module, choose M here: the module will
475 be called sunxi-ir.
476
477config IR_SERIAL
478 tristate "Homebrew Serial Port Receiver"
479 depends on RC_CORE
480 help
481 Say Y if you want to use Homebrew Serial Port Receivers and
482 Transceivers.
483
484 To compile this driver as a module, choose M here: the module will
485 be called serial-ir.
486
487config IR_SERIAL_TRANSMITTER
488 bool "Serial Port Transmitter"
489 depends on IR_SERIAL
490 help
491 Serial Port Transmitter support
492
493config IR_SIR
494 tristate "Built-in SIR IrDA port"
495 depends on RC_CORE
496 help
497 Say Y if you want to use a IrDA SIR port Transceivers.
498
499 To compile this driver as a module, choose M here: the module will
500 be called sir-ir.
501
502config IR_TANGO
503 tristate "Sigma Designs SMP86xx IR decoder"
504 depends on RC_CORE
505 depends on ARCH_TANGO || COMPILE_TEST
506 help
507 Adds support for the HW IR decoder embedded on Sigma Designs
508 Tango-based systems (SMP86xx, SMP87xx).
509 The HW decoder supports NEC, RC-5, RC-6 IR protocols.
510 When compiled as a module, look for tango-ir.
511
512config RC_XBOX_DVD
513 tristate "Xbox DVD Movie Playback Kit"
514 depends on RC_CORE
515 depends on USB_ARCH_HAS_HCD
516 select USB
517 help
518 Say Y here if you want to use the Xbox DVD Movie Playback Kit.
519 These are IR remotes with USB receivers for the Original Xbox (2001).
520
521 To compile this driver as a module, choose M here: the module will be
522 called xbox_remote.
523
524config IR_ZX
525 tristate "ZTE ZX IR remote control"
526 depends on RC_CORE
527 depends on ARCH_ZX || COMPILE_TEST
528 help
529 Say Y if you want to use the IR remote control available
530 on ZTE ZX family SoCs.
531
532 To compile this driver as a module, choose M here: the
533 module will be called zx-irdec.
534
535config IR_TOY
536 tristate "Infrared Toy and IR Droid"
537 depends on RC_CORE
538 depends on USB_ARCH_HAS_HCD
539 help
540 Say Y here if you want to use the Infrared Toy or IR Droid, USB
541 versions.
542
543 To compile this driver as a module, choose M here: the module will be
544 called ir_toy.
545
546endif
547
548endif
549