linux/net/mac80211/mesh.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * Copyright (c) 2008, 2009 open80211s Ltd.
   4 * Copyright (C) 2018 - 2020 Intel Corporation
   5 * Authors:    Luis Carlos Cobo <luisca@cozybit.com>
   6 *             Javier Cardona <javier@cozybit.com>
   7 */
   8
   9#include <linux/slab.h>
  10#include <asm/unaligned.h>
  11#include "ieee80211_i.h"
  12#include "mesh.h"
  13#include "driver-ops.h"
  14
  15static int mesh_allocated;
  16static struct kmem_cache *rm_cache;
  17
  18bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt)
  19{
  20        return (mgmt->u.action.u.mesh_action.action_code ==
  21                        WLAN_MESH_ACTION_HWMP_PATH_SELECTION);
  22}
  23
  24void ieee80211s_init(void)
  25{
  26        mesh_allocated = 1;
  27        rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry),
  28                                     0, 0, NULL);
  29}
  30
  31void ieee80211s_stop(void)
  32{
  33        if (!mesh_allocated)
  34                return;
  35        kmem_cache_destroy(rm_cache);
  36}
  37
  38static void ieee80211_mesh_housekeeping_timer(struct timer_list *t)
  39{
  40        struct ieee80211_sub_if_data *sdata =
  41                from_timer(sdata, t, u.mesh.housekeeping_timer);
  42        struct ieee80211_local *local = sdata->local;
  43        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  44
  45        set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
  46
  47        ieee80211_queue_work(&local->hw, &sdata->work);
  48}
  49
  50/**
  51 * mesh_matches_local - check if the config of a mesh point matches ours
  52 *
  53 * @sdata: local mesh subif
  54 * @ie: information elements of a management frame from the mesh peer
  55 *
  56 * This function checks if the mesh configuration of a mesh point matches the
  57 * local mesh configuration, i.e. if both nodes belong to the same mesh network.
  58 */
  59bool mesh_matches_local(struct ieee80211_sub_if_data *sdata,
  60                        struct ieee802_11_elems *ie)
  61{
  62        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
  63        u32 basic_rates = 0;
  64        struct cfg80211_chan_def sta_chan_def;
  65        struct ieee80211_supported_band *sband;
  66        u32 vht_cap_info = 0;
  67
  68        /*
  69         * As support for each feature is added, check for matching
  70         * - On mesh config capabilities
  71         *   - Power Save Support En
  72         *   - Sync support enabled
  73         *   - Sync support active
  74         *   - Sync support required from peer
  75         *   - MDA enabled
  76         * - Power management control on fc
  77         */
  78        if (!(ifmsh->mesh_id_len == ie->mesh_id_len &&
  79             memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
  80             (ifmsh->mesh_pp_id == ie->mesh_config->meshconf_psel) &&
  81             (ifmsh->mesh_pm_id == ie->mesh_config->meshconf_pmetric) &&
  82             (ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) &&
  83             (ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) &&
  84             (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth)))
  85                return false;
  86
  87        sband = ieee80211_get_sband(sdata);
  88        if (!sband)
  89                return false;
  90
  91        ieee80211_sta_get_rates(sdata, ie, sband->band,
  92                                &basic_rates);
  93
  94        if (sdata->vif.bss_conf.basic_rates != basic_rates)
  95                return false;
  96
  97        cfg80211_chandef_create(&sta_chan_def, sdata->vif.bss_conf.chandef.chan,
  98                                NL80211_CHAN_NO_HT);
  99        ieee80211_chandef_ht_oper(ie->ht_operation, &sta_chan_def);
 100
 101        if (ie->vht_cap_elem)
 102                vht_cap_info = le32_to_cpu(ie->vht_cap_elem->vht_cap_info);
 103
 104        ieee80211_chandef_vht_oper(&sdata->local->hw, vht_cap_info,
 105                                   ie->vht_operation, ie->ht_operation,
 106                                   &sta_chan_def);
 107        ieee80211_chandef_he_6ghz_oper(sdata, ie->he_operation, &sta_chan_def);
 108
 109        if (!cfg80211_chandef_compatible(&sdata->vif.bss_conf.chandef,
 110                                         &sta_chan_def))
 111                return false;
 112
 113        return true;
 114}
 115
 116/**
 117 * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links
 118 *
 119 * @ie: information elements of a management frame from the mesh peer
 120 */
 121bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie)
 122{
 123        return (ie->mesh_config->meshconf_cap &
 124                        IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS) != 0;
 125}
 126
 127/**
 128 * mesh_accept_plinks_update - update accepting_plink in local mesh beacons
 129 *
 130 * @sdata: mesh interface in which mesh beacons are going to be updated
 131 *
 132 * Returns: beacon changed flag if the beacon content changed.
 133 */
 134u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata)
 135{
 136        bool free_plinks;
 137        u32 changed = 0;
 138
 139        /* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0,
 140         * the mesh interface might be able to establish plinks with peers that
 141         * are already on the table but are not on PLINK_ESTAB state. However,
 142         * in general the mesh interface is not accepting peer link requests
 143         * from new peers, and that must be reflected in the beacon
 144         */
 145        free_plinks = mesh_plink_availables(sdata);
 146
 147        if (free_plinks != sdata->u.mesh.accepting_plinks) {
 148                sdata->u.mesh.accepting_plinks = free_plinks;
 149                changed = BSS_CHANGED_BEACON;
 150        }
 151
 152        return changed;
 153}
 154
 155/*
 156 * mesh_sta_cleanup - clean up any mesh sta state
 157 *
 158 * @sta: mesh sta to clean up.
 159 */
 160void mesh_sta_cleanup(struct sta_info *sta)
 161{
 162        struct ieee80211_sub_if_data *sdata = sta->sdata;
 163        u32 changed = mesh_plink_deactivate(sta);
 164
 165        if (changed)
 166                ieee80211_mbss_info_change_notify(sdata, changed);
 167}
 168
 169int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
 170{
 171        int i;
 172
 173        sdata->u.mesh.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL);
 174        if (!sdata->u.mesh.rmc)
 175                return -ENOMEM;
 176        sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1;
 177        for (i = 0; i < RMC_BUCKETS; i++)
 178                INIT_HLIST_HEAD(&sdata->u.mesh.rmc->bucket[i]);
 179        return 0;
 180}
 181
 182void mesh_rmc_free(struct ieee80211_sub_if_data *sdata)
 183{
 184        struct mesh_rmc *rmc = sdata->u.mesh.rmc;
 185        struct rmc_entry *p;
 186        struct hlist_node *n;
 187        int i;
 188
 189        if (!sdata->u.mesh.rmc)
 190                return;
 191
 192        for (i = 0; i < RMC_BUCKETS; i++) {
 193                hlist_for_each_entry_safe(p, n, &rmc->bucket[i], list) {
 194                        hlist_del(&p->list);
 195                        kmem_cache_free(rm_cache, p);
 196                }
 197        }
 198
 199        kfree(rmc);
 200        sdata->u.mesh.rmc = NULL;
 201}
 202
 203/**
 204 * mesh_rmc_check - Check frame in recent multicast cache and add if absent.
 205 *
 206 * @sdata:      interface
 207 * @sa:         source address
 208 * @mesh_hdr:   mesh_header
 209 *
 210 * Returns: 0 if the frame is not in the cache, nonzero otherwise.
 211 *
 212 * Checks using the source address and the mesh sequence number if we have
 213 * received this frame lately. If the frame is not in the cache, it is added to
 214 * it.
 215 */
 216int mesh_rmc_check(struct ieee80211_sub_if_data *sdata,
 217                   const u8 *sa, struct ieee80211s_hdr *mesh_hdr)
 218{
 219        struct mesh_rmc *rmc = sdata->u.mesh.rmc;
 220        u32 seqnum = 0;
 221        int entries = 0;
 222        u8 idx;
 223        struct rmc_entry *p;
 224        struct hlist_node *n;
 225
 226        if (!rmc)
 227                return -1;
 228
 229        /* Don't care about endianness since only match matters */
 230        memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum));
 231        idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask;
 232        hlist_for_each_entry_safe(p, n, &rmc->bucket[idx], list) {
 233                ++entries;
 234                if (time_after(jiffies, p->exp_time) ||
 235                    entries == RMC_QUEUE_MAX_LEN) {
 236                        hlist_del(&p->list);
 237                        kmem_cache_free(rm_cache, p);
 238                        --entries;
 239                } else if ((seqnum == p->seqnum) && ether_addr_equal(sa, p->sa))
 240                        return -1;
 241        }
 242
 243        p = kmem_cache_alloc(rm_cache, GFP_ATOMIC);
 244        if (!p)
 245                return 0;
 246
 247        p->seqnum = seqnum;
 248        p->exp_time = jiffies + RMC_TIMEOUT;
 249        memcpy(p->sa, sa, ETH_ALEN);
 250        hlist_add_head(&p->list, &rmc->bucket[idx]);
 251        return 0;
 252}
 253
 254int mesh_add_meshconf_ie(struct ieee80211_sub_if_data *sdata,
 255                         struct sk_buff *skb)
 256{
 257        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 258        u8 *pos, neighbors;
 259        u8 meshconf_len = sizeof(struct ieee80211_meshconf_ie);
 260        bool is_connected_to_gate = ifmsh->num_gates > 0 ||
 261                ifmsh->mshcfg.dot11MeshGateAnnouncementProtocol ||
 262                ifmsh->mshcfg.dot11MeshConnectedToMeshGate;
 263        bool is_connected_to_as = ifmsh->mshcfg.dot11MeshConnectedToAuthServer;
 264
 265        if (skb_tailroom(skb) < 2 + meshconf_len)
 266                return -ENOMEM;
 267
 268        pos = skb_put(skb, 2 + meshconf_len);
 269        *pos++ = WLAN_EID_MESH_CONFIG;
 270        *pos++ = meshconf_len;
 271
 272        /* save a pointer for quick updates in pre-tbtt */
 273        ifmsh->meshconf_offset = pos - skb->data;
 274
 275        /* Active path selection protocol ID */
 276        *pos++ = ifmsh->mesh_pp_id;
 277        /* Active path selection metric ID   */
 278        *pos++ = ifmsh->mesh_pm_id;
 279        /* Congestion control mode identifier */
 280        *pos++ = ifmsh->mesh_cc_id;
 281        /* Synchronization protocol identifier */
 282        *pos++ = ifmsh->mesh_sp_id;
 283        /* Authentication Protocol identifier */
 284        *pos++ = ifmsh->mesh_auth_id;
 285        /* Mesh Formation Info - number of neighbors */
 286        neighbors = atomic_read(&ifmsh->estab_plinks);
 287        neighbors = min_t(int, neighbors, IEEE80211_MAX_MESH_PEERINGS);
 288        *pos++ = (is_connected_to_as << 7) |
 289                 (neighbors << 1) |
 290                 is_connected_to_gate;
 291        /* Mesh capability */
 292        *pos = 0x00;
 293        *pos |= ifmsh->mshcfg.dot11MeshForwarding ?
 294                        IEEE80211_MESHCONF_CAPAB_FORWARDING : 0x00;
 295        *pos |= ifmsh->accepting_plinks ?
 296                        IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
 297        /* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */
 298        *pos |= ifmsh->ps_peers_deep_sleep ?
 299                        IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL : 0x00;
 300        return 0;
 301}
 302
 303int mesh_add_meshid_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
 304{
 305        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 306        u8 *pos;
 307
 308        if (skb_tailroom(skb) < 2 + ifmsh->mesh_id_len)
 309                return -ENOMEM;
 310
 311        pos = skb_put(skb, 2 + ifmsh->mesh_id_len);
 312        *pos++ = WLAN_EID_MESH_ID;
 313        *pos++ = ifmsh->mesh_id_len;
 314        if (ifmsh->mesh_id_len)
 315                memcpy(pos, ifmsh->mesh_id, ifmsh->mesh_id_len);
 316
 317        return 0;
 318}
 319
 320static int mesh_add_awake_window_ie(struct ieee80211_sub_if_data *sdata,
 321                                    struct sk_buff *skb)
 322{
 323        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 324        u8 *pos;
 325
 326        /* see IEEE802.11-2012 13.14.6 */
 327        if (ifmsh->ps_peers_light_sleep == 0 &&
 328            ifmsh->ps_peers_deep_sleep == 0 &&
 329            ifmsh->nonpeer_pm == NL80211_MESH_POWER_ACTIVE)
 330                return 0;
 331
 332        if (skb_tailroom(skb) < 4)
 333                return -ENOMEM;
 334
 335        pos = skb_put(skb, 2 + 2);
 336        *pos++ = WLAN_EID_MESH_AWAKE_WINDOW;
 337        *pos++ = 2;
 338        put_unaligned_le16(ifmsh->mshcfg.dot11MeshAwakeWindowDuration, pos);
 339
 340        return 0;
 341}
 342
 343int mesh_add_vendor_ies(struct ieee80211_sub_if_data *sdata,
 344                        struct sk_buff *skb)
 345{
 346        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 347        u8 offset, len;
 348        const u8 *data;
 349
 350        if (!ifmsh->ie || !ifmsh->ie_len)
 351                return 0;
 352
 353        /* fast-forward to vendor IEs */
 354        offset = ieee80211_ie_split_vendor(ifmsh->ie, ifmsh->ie_len, 0);
 355
 356        if (offset < ifmsh->ie_len) {
 357                len = ifmsh->ie_len - offset;
 358                data = ifmsh->ie + offset;
 359                if (skb_tailroom(skb) < len)
 360                        return -ENOMEM;
 361                skb_put_data(skb, data, len);
 362        }
 363
 364        return 0;
 365}
 366
 367int mesh_add_rsn_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
 368{
 369        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 370        u8 len = 0;
 371        const u8 *data;
 372
 373        if (!ifmsh->ie || !ifmsh->ie_len)
 374                return 0;
 375
 376        /* find RSN IE */
 377        data = cfg80211_find_ie(WLAN_EID_RSN, ifmsh->ie, ifmsh->ie_len);
 378        if (!data)
 379                return 0;
 380
 381        len = data[1] + 2;
 382
 383        if (skb_tailroom(skb) < len)
 384                return -ENOMEM;
 385        skb_put_data(skb, data, len);
 386
 387        return 0;
 388}
 389
 390static int mesh_add_ds_params_ie(struct ieee80211_sub_if_data *sdata,
 391                                 struct sk_buff *skb)
 392{
 393        struct ieee80211_chanctx_conf *chanctx_conf;
 394        struct ieee80211_channel *chan;
 395        u8 *pos;
 396
 397        if (skb_tailroom(skb) < 3)
 398                return -ENOMEM;
 399
 400        rcu_read_lock();
 401        chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
 402        if (WARN_ON(!chanctx_conf)) {
 403                rcu_read_unlock();
 404                return -EINVAL;
 405        }
 406        chan = chanctx_conf->def.chan;
 407        rcu_read_unlock();
 408
 409        pos = skb_put(skb, 2 + 1);
 410        *pos++ = WLAN_EID_DS_PARAMS;
 411        *pos++ = 1;
 412        *pos++ = ieee80211_frequency_to_channel(chan->center_freq);
 413
 414        return 0;
 415}
 416
 417int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data *sdata,
 418                       struct sk_buff *skb)
 419{
 420        struct ieee80211_supported_band *sband;
 421        u8 *pos;
 422
 423        sband = ieee80211_get_sband(sdata);
 424        if (!sband)
 425                return -EINVAL;
 426
 427        /* HT not allowed in 6 GHz */
 428        if (sband->band == NL80211_BAND_6GHZ)
 429                return 0;
 430
 431        if (!sband->ht_cap.ht_supported ||
 432            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
 433            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
 434            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
 435                return 0;
 436
 437        if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_cap))
 438                return -ENOMEM;
 439
 440        pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_cap));
 441        ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, sband->ht_cap.cap);
 442
 443        return 0;
 444}
 445
 446int mesh_add_ht_oper_ie(struct ieee80211_sub_if_data *sdata,
 447                        struct sk_buff *skb)
 448{
 449        struct ieee80211_local *local = sdata->local;
 450        struct ieee80211_chanctx_conf *chanctx_conf;
 451        struct ieee80211_channel *channel;
 452        struct ieee80211_supported_band *sband;
 453        struct ieee80211_sta_ht_cap *ht_cap;
 454        u8 *pos;
 455
 456        rcu_read_lock();
 457        chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
 458        if (WARN_ON(!chanctx_conf)) {
 459                rcu_read_unlock();
 460                return -EINVAL;
 461        }
 462        channel = chanctx_conf->def.chan;
 463        rcu_read_unlock();
 464
 465        sband = local->hw.wiphy->bands[channel->band];
 466        ht_cap = &sband->ht_cap;
 467
 468        /* HT not allowed in 6 GHz */
 469        if (sband->band == NL80211_BAND_6GHZ)
 470                return 0;
 471
 472        if (!ht_cap->ht_supported ||
 473            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
 474            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
 475            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
 476                return 0;
 477
 478        if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_operation))
 479                return -ENOMEM;
 480
 481        pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_operation));
 482        ieee80211_ie_build_ht_oper(pos, ht_cap, &sdata->vif.bss_conf.chandef,
 483                                   sdata->vif.bss_conf.ht_operation_mode,
 484                                   false);
 485
 486        return 0;
 487}
 488
 489int mesh_add_vht_cap_ie(struct ieee80211_sub_if_data *sdata,
 490                        struct sk_buff *skb)
 491{
 492        struct ieee80211_supported_band *sband;
 493        u8 *pos;
 494
 495        sband = ieee80211_get_sband(sdata);
 496        if (!sband)
 497                return -EINVAL;
 498
 499        /* VHT not allowed in 6 GHz */
 500        if (sband->band == NL80211_BAND_6GHZ)
 501                return 0;
 502
 503        if (!sband->vht_cap.vht_supported ||
 504            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
 505            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
 506            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
 507                return 0;
 508
 509        if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_vht_cap))
 510                return -ENOMEM;
 511
 512        pos = skb_put(skb, 2 + sizeof(struct ieee80211_vht_cap));
 513        ieee80211_ie_build_vht_cap(pos, &sband->vht_cap, sband->vht_cap.cap);
 514
 515        return 0;
 516}
 517
 518int mesh_add_vht_oper_ie(struct ieee80211_sub_if_data *sdata,
 519                         struct sk_buff *skb)
 520{
 521        struct ieee80211_local *local = sdata->local;
 522        struct ieee80211_chanctx_conf *chanctx_conf;
 523        struct ieee80211_channel *channel;
 524        struct ieee80211_supported_band *sband;
 525        struct ieee80211_sta_vht_cap *vht_cap;
 526        u8 *pos;
 527
 528        rcu_read_lock();
 529        chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
 530        if (WARN_ON(!chanctx_conf)) {
 531                rcu_read_unlock();
 532                return -EINVAL;
 533        }
 534        channel = chanctx_conf->def.chan;
 535        rcu_read_unlock();
 536
 537        sband = local->hw.wiphy->bands[channel->band];
 538        vht_cap = &sband->vht_cap;
 539
 540        /* VHT not allowed in 6 GHz */
 541        if (sband->band == NL80211_BAND_6GHZ)
 542                return 0;
 543
 544        if (!vht_cap->vht_supported ||
 545            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
 546            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
 547            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
 548                return 0;
 549
 550        if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_vht_operation))
 551                return -ENOMEM;
 552
 553        pos = skb_put(skb, 2 + sizeof(struct ieee80211_vht_operation));
 554        ieee80211_ie_build_vht_oper(pos, vht_cap,
 555                                    &sdata->vif.bss_conf.chandef);
 556
 557        return 0;
 558}
 559
 560int mesh_add_he_cap_ie(struct ieee80211_sub_if_data *sdata,
 561                       struct sk_buff *skb, u8 ie_len)
 562{
 563        const struct ieee80211_sta_he_cap *he_cap;
 564        struct ieee80211_supported_band *sband;
 565        u8 *pos;
 566
 567        sband = ieee80211_get_sband(sdata);
 568        if (!sband)
 569                return -EINVAL;
 570
 571        he_cap = ieee80211_get_he_iftype_cap(sband, NL80211_IFTYPE_MESH_POINT);
 572
 573        if (!he_cap ||
 574            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
 575            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
 576            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
 577                return 0;
 578
 579        if (skb_tailroom(skb) < ie_len)
 580                return -ENOMEM;
 581
 582        pos = skb_put(skb, ie_len);
 583        ieee80211_ie_build_he_cap(pos, he_cap, pos + ie_len);
 584
 585        return 0;
 586}
 587
 588int mesh_add_he_oper_ie(struct ieee80211_sub_if_data *sdata,
 589                        struct sk_buff *skb)
 590{
 591        const struct ieee80211_sta_he_cap *he_cap;
 592        struct ieee80211_supported_band *sband;
 593        u32 len;
 594        u8 *pos;
 595
 596        sband = ieee80211_get_sband(sdata);
 597        if (!sband)
 598                return -EINVAL;
 599
 600        he_cap = ieee80211_get_he_iftype_cap(sband, NL80211_IFTYPE_MESH_POINT);
 601        if (!he_cap ||
 602            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
 603            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
 604            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
 605                return 0;
 606
 607        len = 2 + 1 + sizeof(struct ieee80211_he_operation);
 608        if (sdata->vif.bss_conf.chandef.chan->band == NL80211_BAND_6GHZ)
 609                len += sizeof(struct ieee80211_he_6ghz_oper);
 610
 611        if (skb_tailroom(skb) < len)
 612                return -ENOMEM;
 613
 614        pos = skb_put(skb, len);
 615        ieee80211_ie_build_he_oper(pos, &sdata->vif.bss_conf.chandef);
 616
 617        return 0;
 618}
 619
 620int mesh_add_he_6ghz_cap_ie(struct ieee80211_sub_if_data *sdata,
 621                            struct sk_buff *skb)
 622{
 623        struct ieee80211_supported_band *sband;
 624        const struct ieee80211_sband_iftype_data *iftd;
 625
 626        sband = ieee80211_get_sband(sdata);
 627        if (!sband)
 628                return -EINVAL;
 629
 630        iftd = ieee80211_get_sband_iftype_data(sband,
 631                                               NL80211_IFTYPE_MESH_POINT);
 632        /* The device doesn't support HE in mesh mode or at all */
 633        if (!iftd)
 634                return 0;
 635
 636        ieee80211_ie_build_he_6ghz_cap(sdata, skb);
 637        return 0;
 638}
 639
 640static void ieee80211_mesh_path_timer(struct timer_list *t)
 641{
 642        struct ieee80211_sub_if_data *sdata =
 643                from_timer(sdata, t, u.mesh.mesh_path_timer);
 644
 645        ieee80211_queue_work(&sdata->local->hw, &sdata->work);
 646}
 647
 648static void ieee80211_mesh_path_root_timer(struct timer_list *t)
 649{
 650        struct ieee80211_sub_if_data *sdata =
 651                from_timer(sdata, t, u.mesh.mesh_path_root_timer);
 652        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 653
 654        set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
 655
 656        ieee80211_queue_work(&sdata->local->hw, &sdata->work);
 657}
 658
 659void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh)
 660{
 661        if (ifmsh->mshcfg.dot11MeshHWMPRootMode > IEEE80211_ROOTMODE_ROOT)
 662                set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
 663        else {
 664                clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
 665                /* stop running timer */
 666                del_timer_sync(&ifmsh->mesh_path_root_timer);
 667        }
 668}
 669
 670static void
 671ieee80211_mesh_update_bss_params(struct ieee80211_sub_if_data *sdata,
 672                                 u8 *ie, u8 ie_len)
 673{
 674        struct ieee80211_supported_band *sband;
 675        const u8 *cap;
 676        const struct ieee80211_he_operation *he_oper = NULL;
 677
 678        sband = ieee80211_get_sband(sdata);
 679        if (!sband)
 680                return;
 681
 682        if (!ieee80211_get_he_iftype_cap(sband, NL80211_IFTYPE_MESH_POINT) ||
 683            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
 684            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
 685            sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
 686                return;
 687
 688        sdata->vif.bss_conf.he_support = true;
 689
 690        cap = cfg80211_find_ext_ie(WLAN_EID_EXT_HE_OPERATION, ie, ie_len);
 691        if (cap && cap[1] >= ieee80211_he_oper_size(&cap[3]))
 692                he_oper = (void *)(cap + 3);
 693
 694        if (he_oper)
 695                sdata->vif.bss_conf.he_oper.params =
 696                        __le32_to_cpu(he_oper->he_oper_params);
 697}
 698
 699/**
 700 * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame
 701 * @hdr:        802.11 frame header
 702 * @fc:         frame control field
 703 * @meshda:     destination address in the mesh
 704 * @meshsa:     source address in the mesh.  Same as TA, as frame is
 705 *              locally originated.
 706 *
 707 * Return the length of the 802.11 (does not include a mesh control header)
 708 */
 709int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,
 710                                  const u8 *meshda, const u8 *meshsa)
 711{
 712        if (is_multicast_ether_addr(meshda)) {
 713                *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
 714                /* DA TA SA */
 715                memcpy(hdr->addr1, meshda, ETH_ALEN);
 716                memcpy(hdr->addr2, meshsa, ETH_ALEN);
 717                memcpy(hdr->addr3, meshsa, ETH_ALEN);
 718                return 24;
 719        } else {
 720                *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
 721                /* RA TA DA SA */
 722                eth_zero_addr(hdr->addr1);   /* RA is resolved later */
 723                memcpy(hdr->addr2, meshsa, ETH_ALEN);
 724                memcpy(hdr->addr3, meshda, ETH_ALEN);
 725                memcpy(hdr->addr4, meshsa, ETH_ALEN);
 726                return 30;
 727        }
 728}
 729
 730/**
 731 * ieee80211_new_mesh_header - create a new mesh header
 732 * @sdata:      mesh interface to be used
 733 * @meshhdr:    uninitialized mesh header
 734 * @addr4or5:   1st address in the ae header, which may correspond to address 4
 735 *              (if addr6 is NULL) or address 5 (if addr6 is present). It may
 736 *              be NULL.
 737 * @addr6:      2nd address in the ae header, which corresponds to addr6 of the
 738 *              mesh frame
 739 *
 740 * Return the header length.
 741 */
 742unsigned int ieee80211_new_mesh_header(struct ieee80211_sub_if_data *sdata,
 743                                       struct ieee80211s_hdr *meshhdr,
 744                                       const char *addr4or5, const char *addr6)
 745{
 746        if (WARN_ON(!addr4or5 && addr6))
 747                return 0;
 748
 749        memset(meshhdr, 0, sizeof(*meshhdr));
 750
 751        meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
 752
 753        /* FIXME: racy -- TX on multiple queues can be concurrent */
 754        put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum);
 755        sdata->u.mesh.mesh_seqnum++;
 756
 757        if (addr4or5 && !addr6) {
 758                meshhdr->flags |= MESH_FLAGS_AE_A4;
 759                memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
 760                return 2 * ETH_ALEN;
 761        } else if (addr4or5 && addr6) {
 762                meshhdr->flags |= MESH_FLAGS_AE_A5_A6;
 763                memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
 764                memcpy(meshhdr->eaddr2, addr6, ETH_ALEN);
 765                return 3 * ETH_ALEN;
 766        }
 767
 768        return ETH_ALEN;
 769}
 770
 771static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata)
 772{
 773        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 774        u32 changed;
 775
 776        if (ifmsh->mshcfg.plink_timeout > 0)
 777                ieee80211_sta_expire(sdata, ifmsh->mshcfg.plink_timeout * HZ);
 778        mesh_path_expire(sdata);
 779
 780        changed = mesh_accept_plinks_update(sdata);
 781        ieee80211_mbss_info_change_notify(sdata, changed);
 782
 783        mod_timer(&ifmsh->housekeeping_timer,
 784                  round_jiffies(jiffies +
 785                                IEEE80211_MESH_HOUSEKEEPING_INTERVAL));
 786}
 787
 788static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata)
 789{
 790        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 791        u32 interval;
 792
 793        mesh_path_tx_root_frame(sdata);
 794
 795        if (ifmsh->mshcfg.dot11MeshHWMPRootMode == IEEE80211_PROACTIVE_RANN)
 796                interval = ifmsh->mshcfg.dot11MeshHWMPRannInterval;
 797        else
 798                interval = ifmsh->mshcfg.dot11MeshHWMProotInterval;
 799
 800        mod_timer(&ifmsh->mesh_path_root_timer,
 801                  round_jiffies(TU_TO_EXP_TIME(interval)));
 802}
 803
 804static int
 805ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh)
 806{
 807        struct beacon_data *bcn;
 808        int head_len, tail_len;
 809        struct sk_buff *skb;
 810        struct ieee80211_mgmt *mgmt;
 811        struct ieee80211_chanctx_conf *chanctx_conf;
 812        struct mesh_csa_settings *csa;
 813        enum nl80211_band band;
 814        u8 ie_len_he_cap;
 815        u8 *pos;
 816        struct ieee80211_sub_if_data *sdata;
 817        int hdr_len = offsetofend(struct ieee80211_mgmt, u.beacon);
 818
 819        sdata = container_of(ifmsh, struct ieee80211_sub_if_data, u.mesh);
 820        rcu_read_lock();
 821        chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
 822        band = chanctx_conf->def.chan->band;
 823        rcu_read_unlock();
 824
 825        ie_len_he_cap = ieee80211_ie_len_he_cap(sdata,
 826                                                NL80211_IFTYPE_MESH_POINT);
 827        head_len = hdr_len +
 828                   2 + /* NULL SSID */
 829                   /* Channel Switch Announcement */
 830                   2 + sizeof(struct ieee80211_channel_sw_ie) +
 831                   /* Mesh Channel Switch Parameters */
 832                   2 + sizeof(struct ieee80211_mesh_chansw_params_ie) +
 833                   /* Channel Switch Wrapper + Wide Bandwidth CSA IE */
 834                   2 + 2 + sizeof(struct ieee80211_wide_bw_chansw_ie) +
 835                   2 + sizeof(struct ieee80211_sec_chan_offs_ie) +
 836                   2 + 8 + /* supported rates */
 837                   2 + 3; /* DS params */
 838        tail_len = 2 + (IEEE80211_MAX_SUPP_RATES - 8) +
 839                   2 + sizeof(struct ieee80211_ht_cap) +
 840                   2 + sizeof(struct ieee80211_ht_operation) +
 841                   2 + ifmsh->mesh_id_len +
 842                   2 + sizeof(struct ieee80211_meshconf_ie) +
 843                   2 + sizeof(__le16) + /* awake window */
 844                   2 + sizeof(struct ieee80211_vht_cap) +
 845                   2 + sizeof(struct ieee80211_vht_operation) +
 846                   ie_len_he_cap +
 847                   2 + 1 + sizeof(struct ieee80211_he_operation) +
 848                           sizeof(struct ieee80211_he_6ghz_oper) +
 849                   2 + 1 + sizeof(struct ieee80211_he_6ghz_capa) +
 850                   ifmsh->ie_len;
 851
 852        bcn = kzalloc(sizeof(*bcn) + head_len + tail_len, GFP_KERNEL);
 853        /* need an skb for IE builders to operate on */
 854        skb = dev_alloc_skb(max(head_len, tail_len));
 855
 856        if (!bcn || !skb)
 857                goto out_free;
 858
 859        /*
 860         * pointers go into the block we allocated,
 861         * memory is | beacon_data | head | tail |
 862         */
 863        bcn->head = ((u8 *) bcn) + sizeof(*bcn);
 864
 865        /* fill in the head */
 866        mgmt = skb_put_zero(skb, hdr_len);
 867        mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
 868                                          IEEE80211_STYPE_BEACON);
 869        eth_broadcast_addr(mgmt->da);
 870        memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
 871        memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
 872        ieee80211_mps_set_frame_flags(sdata, NULL, (void *) mgmt);
 873        mgmt->u.beacon.beacon_int =
 874                cpu_to_le16(sdata->vif.bss_conf.beacon_int);
 875        mgmt->u.beacon.capab_info |= cpu_to_le16(
 876                sdata->u.mesh.security ? WLAN_CAPABILITY_PRIVACY : 0);
 877
 878        pos = skb_put(skb, 2);
 879        *pos++ = WLAN_EID_SSID;
 880        *pos++ = 0x0;
 881
 882        rcu_read_lock();
 883        csa = rcu_dereference(ifmsh->csa);
 884        if (csa) {
 885                enum nl80211_channel_type ct;
 886                struct cfg80211_chan_def *chandef;
 887                int ie_len = 2 + sizeof(struct ieee80211_channel_sw_ie) +
 888                             2 + sizeof(struct ieee80211_mesh_chansw_params_ie);
 889
 890                pos = skb_put_zero(skb, ie_len);
 891                *pos++ = WLAN_EID_CHANNEL_SWITCH;
 892                *pos++ = 3;
 893                *pos++ = 0x0;
 894                *pos++ = ieee80211_frequency_to_channel(
 895                                csa->settings.chandef.chan->center_freq);
 896                bcn->cntdwn_current_counter = csa->settings.count;
 897                bcn->cntdwn_counter_offsets[0] = hdr_len + 6;
 898                *pos++ = csa->settings.count;
 899                *pos++ = WLAN_EID_CHAN_SWITCH_PARAM;
 900                *pos++ = 6;
 901                if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT) {
 902                        *pos++ = ifmsh->mshcfg.dot11MeshTTL;
 903                        *pos |= WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR;
 904                } else {
 905                        *pos++ = ifmsh->chsw_ttl;
 906                }
 907                *pos++ |= csa->settings.block_tx ?
 908                          WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT : 0x00;
 909                put_unaligned_le16(WLAN_REASON_MESH_CHAN, pos);
 910                pos += 2;
 911                put_unaligned_le16(ifmsh->pre_value, pos);
 912                pos += 2;
 913
 914                switch (csa->settings.chandef.width) {
 915                case NL80211_CHAN_WIDTH_40:
 916                        ie_len = 2 + sizeof(struct ieee80211_sec_chan_offs_ie);
 917                        pos = skb_put_zero(skb, ie_len);
 918
 919                        *pos++ = WLAN_EID_SECONDARY_CHANNEL_OFFSET; /* EID */
 920                        *pos++ = 1;                                 /* len */
 921                        ct = cfg80211_get_chandef_type(&csa->settings.chandef);
 922                        if (ct == NL80211_CHAN_HT40PLUS)
 923                                *pos++ = IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
 924                        else
 925                                *pos++ = IEEE80211_HT_PARAM_CHA_SEC_BELOW;
 926                        break;
 927                case NL80211_CHAN_WIDTH_80:
 928                case NL80211_CHAN_WIDTH_80P80:
 929                case NL80211_CHAN_WIDTH_160:
 930                        /* Channel Switch Wrapper + Wide Bandwidth CSA IE */
 931                        ie_len = 2 + 2 +
 932                                 sizeof(struct ieee80211_wide_bw_chansw_ie);
 933                        pos = skb_put_zero(skb, ie_len);
 934
 935                        *pos++ = WLAN_EID_CHANNEL_SWITCH_WRAPPER; /* EID */
 936                        *pos++ = 5;                               /* len */
 937                        /* put sub IE */
 938                        chandef = &csa->settings.chandef;
 939                        ieee80211_ie_build_wide_bw_cs(pos, chandef);
 940                        break;
 941                default:
 942                        break;
 943                }
 944        }
 945        rcu_read_unlock();
 946
 947        if (ieee80211_add_srates_ie(sdata, skb, true, band) ||
 948            mesh_add_ds_params_ie(sdata, skb))
 949                goto out_free;
 950
 951        bcn->head_len = skb->len;
 952        memcpy(bcn->head, skb->data, bcn->head_len);
 953
 954        /* now the tail */
 955        skb_trim(skb, 0);
 956        bcn->tail = bcn->head + bcn->head_len;
 957
 958        if (ieee80211_add_ext_srates_ie(sdata, skb, true, band) ||
 959            mesh_add_rsn_ie(sdata, skb) ||
 960            mesh_add_ht_cap_ie(sdata, skb) ||
 961            mesh_add_ht_oper_ie(sdata, skb) ||
 962            mesh_add_meshid_ie(sdata, skb) ||
 963            mesh_add_meshconf_ie(sdata, skb) ||
 964            mesh_add_awake_window_ie(sdata, skb) ||
 965            mesh_add_vht_cap_ie(sdata, skb) ||
 966            mesh_add_vht_oper_ie(sdata, skb) ||
 967            mesh_add_he_cap_ie(sdata, skb, ie_len_he_cap) ||
 968            mesh_add_he_oper_ie(sdata, skb) ||
 969            mesh_add_he_6ghz_cap_ie(sdata, skb) ||
 970            mesh_add_vendor_ies(sdata, skb))
 971                goto out_free;
 972
 973        bcn->tail_len = skb->len;
 974        memcpy(bcn->tail, skb->data, bcn->tail_len);
 975        ieee80211_mesh_update_bss_params(sdata, bcn->tail, bcn->tail_len);
 976        bcn->meshconf = (struct ieee80211_meshconf_ie *)
 977                                        (bcn->tail + ifmsh->meshconf_offset);
 978
 979        dev_kfree_skb(skb);
 980        rcu_assign_pointer(ifmsh->beacon, bcn);
 981        return 0;
 982out_free:
 983        kfree(bcn);
 984        dev_kfree_skb(skb);
 985        return -ENOMEM;
 986}
 987
 988static int
 989ieee80211_mesh_rebuild_beacon(struct ieee80211_sub_if_data *sdata)
 990{
 991        struct beacon_data *old_bcn;
 992        int ret;
 993
 994        old_bcn = rcu_dereference_protected(sdata->u.mesh.beacon,
 995                                            lockdep_is_held(&sdata->wdev.mtx));
 996        ret = ieee80211_mesh_build_beacon(&sdata->u.mesh);
 997        if (ret)
 998                /* just reuse old beacon */
 999                return ret;
1000
1001        if (old_bcn)
1002                kfree_rcu(old_bcn, rcu_head);
1003        return 0;
1004}
1005
1006void ieee80211_mbss_info_change_notify(struct ieee80211_sub_if_data *sdata,
1007                                       u32 changed)
1008{
1009        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1010        unsigned long bits = changed;
1011        u32 bit;
1012
1013        if (!bits)
1014                return;
1015
1016        /* if we race with running work, worst case this work becomes a noop */
1017        for_each_set_bit(bit, &bits, sizeof(changed) * BITS_PER_BYTE)
1018                set_bit(bit, &ifmsh->mbss_changed);
1019        set_bit(MESH_WORK_MBSS_CHANGED, &ifmsh->wrkq_flags);
1020        ieee80211_queue_work(&sdata->local->hw, &sdata->work);
1021}
1022
1023int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
1024{
1025        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1026        struct ieee80211_local *local = sdata->local;
1027        u32 changed = BSS_CHANGED_BEACON |
1028                      BSS_CHANGED_BEACON_ENABLED |
1029                      BSS_CHANGED_HT |
1030                      BSS_CHANGED_BASIC_RATES |
1031                      BSS_CHANGED_BEACON_INT |
1032                      BSS_CHANGED_MCAST_RATE;
1033
1034        local->fif_other_bss++;
1035        /* mesh ifaces must set allmulti to forward mcast traffic */
1036        atomic_inc(&local->iff_allmultis);
1037        ieee80211_configure_filter(local);
1038
1039        ifmsh->mesh_cc_id = 0;  /* Disabled */
1040        /* register sync ops from extensible synchronization framework */
1041        ifmsh->sync_ops = ieee80211_mesh_sync_ops_get(ifmsh->mesh_sp_id);
1042        ifmsh->sync_offset_clockdrift_max = 0;
1043        set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
1044        ieee80211_mesh_root_setup(ifmsh);
1045        ieee80211_queue_work(&local->hw, &sdata->work);
1046        sdata->vif.bss_conf.ht_operation_mode =
1047                                ifmsh->mshcfg.ht_opmode;
1048        sdata->vif.bss_conf.enable_beacon = true;
1049
1050        changed |= ieee80211_mps_local_status_update(sdata);
1051
1052        if (ieee80211_mesh_build_beacon(ifmsh)) {
1053                ieee80211_stop_mesh(sdata);
1054                return -ENOMEM;
1055        }
1056
1057        ieee80211_recalc_dtim(local, sdata);
1058        ieee80211_bss_info_change_notify(sdata, changed);
1059
1060        netif_carrier_on(sdata->dev);
1061        return 0;
1062}
1063
1064void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
1065{
1066        struct ieee80211_local *local = sdata->local;
1067        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1068        struct beacon_data *bcn;
1069
1070        netif_carrier_off(sdata->dev);
1071
1072        /* flush STAs and mpaths on this iface */
1073        sta_info_flush(sdata);
1074        ieee80211_free_keys(sdata, true);
1075        mesh_path_flush_by_iface(sdata);
1076
1077        /* stop the beacon */
1078        ifmsh->mesh_id_len = 0;
1079        sdata->vif.bss_conf.enable_beacon = false;
1080        sdata->beacon_rate_set = false;
1081        clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state);
1082        ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
1083
1084        /* remove beacon */
1085        bcn = rcu_dereference_protected(ifmsh->beacon,
1086                                        lockdep_is_held(&sdata->wdev.mtx));
1087        RCU_INIT_POINTER(ifmsh->beacon, NULL);
1088        kfree_rcu(bcn, rcu_head);
1089
1090        /* free all potentially still buffered group-addressed frames */
1091        local->total_ps_buffered -= skb_queue_len(&ifmsh->ps.bc_buf);
1092        skb_queue_purge(&ifmsh->ps.bc_buf);
1093
1094        del_timer_sync(&sdata->u.mesh.housekeeping_timer);
1095        del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
1096        del_timer_sync(&sdata->u.mesh.mesh_path_timer);
1097
1098        /* clear any mesh work (for next join) we may have accrued */
1099        ifmsh->wrkq_flags = 0;
1100        ifmsh->mbss_changed = 0;
1101
1102        local->fif_other_bss--;
1103        atomic_dec(&local->iff_allmultis);
1104        ieee80211_configure_filter(local);
1105}
1106
1107static void ieee80211_mesh_csa_mark_radar(struct ieee80211_sub_if_data *sdata)
1108{
1109        int err;
1110
1111        /* if the current channel is a DFS channel, mark the channel as
1112         * unavailable.
1113         */
1114        err = cfg80211_chandef_dfs_required(sdata->local->hw.wiphy,
1115                                            &sdata->vif.bss_conf.chandef,
1116                                            NL80211_IFTYPE_MESH_POINT);
1117        if (err > 0)
1118                cfg80211_radar_event(sdata->local->hw.wiphy,
1119                                     &sdata->vif.bss_conf.chandef, GFP_ATOMIC);
1120}
1121
1122static bool
1123ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata,
1124                                 struct ieee802_11_elems *elems, bool beacon)
1125{
1126        struct cfg80211_csa_settings params;
1127        struct ieee80211_csa_ie csa_ie;
1128        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1129        struct ieee80211_supported_band *sband;
1130        int err;
1131        u32 sta_flags, vht_cap_info = 0;
1132
1133        sdata_assert_lock(sdata);
1134
1135        sband = ieee80211_get_sband(sdata);
1136        if (!sband)
1137                return false;
1138
1139        sta_flags = 0;
1140        switch (sdata->vif.bss_conf.chandef.width) {
1141        case NL80211_CHAN_WIDTH_20_NOHT:
1142                sta_flags |= IEEE80211_STA_DISABLE_HT;
1143                fallthrough;
1144        case NL80211_CHAN_WIDTH_20:
1145                sta_flags |= IEEE80211_STA_DISABLE_40MHZ;
1146                fallthrough;
1147        case NL80211_CHAN_WIDTH_40:
1148                sta_flags |= IEEE80211_STA_DISABLE_VHT;
1149                break;
1150        default:
1151                break;
1152        }
1153
1154        if (elems->vht_cap_elem)
1155                vht_cap_info =
1156                        le32_to_cpu(elems->vht_cap_elem->vht_cap_info);
1157
1158        memset(&params, 0, sizeof(params));
1159        err = ieee80211_parse_ch_switch_ie(sdata, elems, sband->band,
1160                                           vht_cap_info,
1161                                           sta_flags, sdata->vif.addr,
1162                                           &csa_ie);
1163        if (err < 0)
1164                return false;
1165        if (err)
1166                return false;
1167
1168        /* Mark the channel unavailable if the reason for the switch is
1169         * regulatory.
1170         */
1171        if (csa_ie.reason_code == WLAN_REASON_MESH_CHAN_REGULATORY)
1172                ieee80211_mesh_csa_mark_radar(sdata);
1173
1174        params.chandef = csa_ie.chandef;
1175        params.count = csa_ie.count;
1176
1177        if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, &params.chandef,
1178                                     IEEE80211_CHAN_DISABLED) ||
1179            !cfg80211_reg_can_beacon(sdata->local->hw.wiphy, &params.chandef,
1180                                     NL80211_IFTYPE_MESH_POINT)) {
1181                sdata_info(sdata,
1182                           "mesh STA %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting\n",
1183                           sdata->vif.addr,
1184                           params.chandef.chan->center_freq,
1185                           params.chandef.width,
1186                           params.chandef.center_freq1,
1187                           params.chandef.center_freq2);
1188                return false;
1189        }
1190
1191        err = cfg80211_chandef_dfs_required(sdata->local->hw.wiphy,
1192                                            &params.chandef,
1193                                            NL80211_IFTYPE_MESH_POINT);
1194        if (err < 0)
1195                return false;
1196        if (err > 0 && !ifmsh->userspace_handles_dfs) {
1197                sdata_info(sdata,
1198                           "mesh STA %pM switches to channel requiring DFS (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting\n",
1199                           sdata->vif.addr,
1200                           params.chandef.chan->center_freq,
1201                           params.chandef.width,
1202                           params.chandef.center_freq1,
1203                           params.chandef.center_freq2);
1204                return false;
1205        }
1206
1207        params.radar_required = err;
1208
1209        if (cfg80211_chandef_identical(&params.chandef,
1210                                       &sdata->vif.bss_conf.chandef)) {
1211                mcsa_dbg(sdata,
1212                         "received csa with an identical chandef, ignoring\n");
1213                return true;
1214        }
1215
1216        mcsa_dbg(sdata,
1217                 "received channel switch announcement to go to channel %d MHz\n",
1218                 params.chandef.chan->center_freq);
1219
1220        params.block_tx = csa_ie.mode & WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT;
1221        if (beacon) {
1222                ifmsh->chsw_ttl = csa_ie.ttl - 1;
1223                if (ifmsh->pre_value >= csa_ie.pre_value)
1224                        return false;
1225                ifmsh->pre_value = csa_ie.pre_value;
1226        }
1227
1228        if (ifmsh->chsw_ttl >= ifmsh->mshcfg.dot11MeshTTL)
1229                return false;
1230
1231        ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_REPEATER;
1232
1233        if (ieee80211_channel_switch(sdata->local->hw.wiphy, sdata->dev,
1234                                     &params) < 0)
1235                return false;
1236
1237        return true;
1238}
1239
1240static void
1241ieee80211_mesh_rx_probe_req(struct ieee80211_sub_if_data *sdata,
1242                            struct ieee80211_mgmt *mgmt, size_t len)
1243{
1244        struct ieee80211_local *local = sdata->local;
1245        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1246        struct sk_buff *presp;
1247        struct beacon_data *bcn;
1248        struct ieee80211_mgmt *hdr;
1249        struct ieee802_11_elems elems;
1250        size_t baselen;
1251        u8 *pos;
1252
1253        pos = mgmt->u.probe_req.variable;
1254        baselen = (u8 *) pos - (u8 *) mgmt;
1255        if (baselen > len)
1256                return;
1257
1258        ieee802_11_parse_elems(pos, len - baselen, false, &elems, mgmt->bssid,
1259                               NULL);
1260
1261        if (!elems.mesh_id)
1262                return;
1263
1264        /* 802.11-2012 10.1.4.3.2 */
1265        if ((!ether_addr_equal(mgmt->da, sdata->vif.addr) &&
1266             !is_broadcast_ether_addr(mgmt->da)) ||
1267            elems.ssid_len != 0)
1268                return;
1269
1270        if (elems.mesh_id_len != 0 &&
1271            (elems.mesh_id_len != ifmsh->mesh_id_len ||
1272             memcmp(elems.mesh_id, ifmsh->mesh_id, ifmsh->mesh_id_len)))
1273                return;
1274
1275        rcu_read_lock();
1276        bcn = rcu_dereference(ifmsh->beacon);
1277
1278        if (!bcn)
1279                goto out;
1280
1281        presp = dev_alloc_skb(local->tx_headroom +
1282                              bcn->head_len + bcn->tail_len);
1283        if (!presp)
1284                goto out;
1285
1286        skb_reserve(presp, local->tx_headroom);
1287        skb_put_data(presp, bcn->head, bcn->head_len);
1288        skb_put_data(presp, bcn->tail, bcn->tail_len);
1289        hdr = (struct ieee80211_mgmt *) presp->data;
1290        hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
1291                                         IEEE80211_STYPE_PROBE_RESP);
1292        memcpy(hdr->da, mgmt->sa, ETH_ALEN);
1293        IEEE80211_SKB_CB(presp)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
1294        ieee80211_tx_skb(sdata, presp);
1295out:
1296        rcu_read_unlock();
1297}
1298
1299static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
1300                                        u16 stype,
1301                                        struct ieee80211_mgmt *mgmt,
1302                                        size_t len,
1303                                        struct ieee80211_rx_status *rx_status)
1304{
1305        struct ieee80211_local *local = sdata->local;
1306        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1307        struct ieee802_11_elems elems;
1308        struct ieee80211_channel *channel;
1309        size_t baselen;
1310        int freq;
1311        enum nl80211_band band = rx_status->band;
1312
1313        /* ignore ProbeResp to foreign address */
1314        if (stype == IEEE80211_STYPE_PROBE_RESP &&
1315            !ether_addr_equal(mgmt->da, sdata->vif.addr))
1316                return;
1317
1318        baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
1319        if (baselen > len)
1320                return;
1321
1322        ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
1323                               false, &elems, mgmt->bssid, NULL);
1324
1325        /* ignore non-mesh or secure / unsecure mismatch */
1326        if ((!elems.mesh_id || !elems.mesh_config) ||
1327            (elems.rsn && sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) ||
1328            (!elems.rsn && sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE))
1329                return;
1330
1331        if (elems.ds_params)
1332                freq = ieee80211_channel_to_frequency(elems.ds_params[0], band);
1333        else
1334                freq = rx_status->freq;
1335
1336        channel = ieee80211_get_channel(local->hw.wiphy, freq);
1337
1338        if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
1339                return;
1340
1341        if (mesh_matches_local(sdata, &elems)) {
1342                mpl_dbg(sdata, "rssi_threshold=%d,rx_status->signal=%d\n",
1343                        sdata->u.mesh.mshcfg.rssi_threshold, rx_status->signal);
1344                if (!sdata->u.mesh.user_mpm ||
1345                    sdata->u.mesh.mshcfg.rssi_threshold == 0 ||
1346                    sdata->u.mesh.mshcfg.rssi_threshold < rx_status->signal)
1347                        mesh_neighbour_update(sdata, mgmt->sa, &elems,
1348                                              rx_status);
1349
1350                if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT &&
1351                    !sdata->vif.csa_active)
1352                        ieee80211_mesh_process_chnswitch(sdata, &elems, true);
1353        }
1354
1355        if (ifmsh->sync_ops)
1356                ifmsh->sync_ops->rx_bcn_presp(sdata,
1357                        stype, mgmt, &elems, rx_status);
1358}
1359
1360int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata)
1361{
1362        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1363        struct mesh_csa_settings *tmp_csa_settings;
1364        int ret = 0;
1365        int changed = 0;
1366
1367        /* Reset the TTL value and Initiator flag */
1368        ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE;
1369        ifmsh->chsw_ttl = 0;
1370
1371        /* Remove the CSA and MCSP elements from the beacon */
1372        tmp_csa_settings = rcu_dereference_protected(ifmsh->csa,
1373                                            lockdep_is_held(&sdata->wdev.mtx));
1374        RCU_INIT_POINTER(ifmsh->csa, NULL);
1375        if (tmp_csa_settings)
1376                kfree_rcu(tmp_csa_settings, rcu_head);
1377        ret = ieee80211_mesh_rebuild_beacon(sdata);
1378        if (ret)
1379                return -EINVAL;
1380
1381        changed |= BSS_CHANGED_BEACON;
1382
1383        mcsa_dbg(sdata, "complete switching to center freq %d MHz",
1384                 sdata->vif.bss_conf.chandef.chan->center_freq);
1385        return changed;
1386}
1387
1388int ieee80211_mesh_csa_beacon(struct ieee80211_sub_if_data *sdata,
1389                              struct cfg80211_csa_settings *csa_settings)
1390{
1391        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1392        struct mesh_csa_settings *tmp_csa_settings;
1393        int ret = 0;
1394
1395        lockdep_assert_held(&sdata->wdev.mtx);
1396
1397        tmp_csa_settings = kmalloc(sizeof(*tmp_csa_settings),
1398                                   GFP_ATOMIC);
1399        if (!tmp_csa_settings)
1400                return -ENOMEM;
1401
1402        memcpy(&tmp_csa_settings->settings, csa_settings,
1403               sizeof(struct cfg80211_csa_settings));
1404
1405        rcu_assign_pointer(ifmsh->csa, tmp_csa_settings);
1406
1407        ret = ieee80211_mesh_rebuild_beacon(sdata);
1408        if (ret) {
1409                tmp_csa_settings = rcu_dereference(ifmsh->csa);
1410                RCU_INIT_POINTER(ifmsh->csa, NULL);
1411                kfree_rcu(tmp_csa_settings, rcu_head);
1412                return ret;
1413        }
1414
1415        return BSS_CHANGED_BEACON;
1416}
1417
1418static int mesh_fwd_csa_frame(struct ieee80211_sub_if_data *sdata,
1419                               struct ieee80211_mgmt *mgmt, size_t len,
1420                               struct ieee802_11_elems *elems)
1421{
1422        struct ieee80211_mgmt *mgmt_fwd;
1423        struct sk_buff *skb;
1424        struct ieee80211_local *local = sdata->local;
1425
1426        skb = dev_alloc_skb(local->tx_headroom + len);
1427        if (!skb)
1428                return -ENOMEM;
1429        skb_reserve(skb, local->tx_headroom);
1430        mgmt_fwd = skb_put(skb, len);
1431
1432        elems->mesh_chansw_params_ie->mesh_ttl--;
1433        elems->mesh_chansw_params_ie->mesh_flags &=
1434                ~WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR;
1435
1436        memcpy(mgmt_fwd, mgmt, len);
1437        eth_broadcast_addr(mgmt_fwd->da);
1438        memcpy(mgmt_fwd->sa, sdata->vif.addr, ETH_ALEN);
1439        memcpy(mgmt_fwd->bssid, sdata->vif.addr, ETH_ALEN);
1440
1441        ieee80211_tx_skb(sdata, skb);
1442        return 0;
1443}
1444
1445static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata,
1446                              struct ieee80211_mgmt *mgmt, size_t len)
1447{
1448        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1449        struct ieee802_11_elems elems;
1450        u16 pre_value;
1451        bool fwd_csa = true;
1452        size_t baselen;
1453        u8 *pos;
1454
1455        if (mgmt->u.action.u.measurement.action_code !=
1456            WLAN_ACTION_SPCT_CHL_SWITCH)
1457                return;
1458
1459        pos = mgmt->u.action.u.chan_switch.variable;
1460        baselen = offsetof(struct ieee80211_mgmt,
1461                           u.action.u.chan_switch.variable);
1462        ieee802_11_parse_elems(pos, len - baselen, true, &elems,
1463                               mgmt->bssid, NULL);
1464
1465        if (!mesh_matches_local(sdata, &elems))
1466                return;
1467
1468        ifmsh->chsw_ttl = elems.mesh_chansw_params_ie->mesh_ttl;
1469        if (!--ifmsh->chsw_ttl)
1470                fwd_csa = false;
1471
1472        pre_value = le16_to_cpu(elems.mesh_chansw_params_ie->mesh_pre_value);
1473        if (ifmsh->pre_value >= pre_value)
1474                return;
1475
1476        ifmsh->pre_value = pre_value;
1477
1478        if (!sdata->vif.csa_active &&
1479            !ieee80211_mesh_process_chnswitch(sdata, &elems, false)) {
1480                mcsa_dbg(sdata, "Failed to process CSA action frame");
1481                return;
1482        }
1483
1484        /* forward or re-broadcast the CSA frame */
1485        if (fwd_csa) {
1486                if (mesh_fwd_csa_frame(sdata, mgmt, len, &elems) < 0)
1487                        mcsa_dbg(sdata, "Failed to forward the CSA frame");
1488        }
1489}
1490
1491static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
1492                                          struct ieee80211_mgmt *mgmt,
1493                                          size_t len,
1494                                          struct ieee80211_rx_status *rx_status)
1495{
1496        switch (mgmt->u.action.category) {
1497        case WLAN_CATEGORY_SELF_PROTECTED:
1498                switch (mgmt->u.action.u.self_prot.action_code) {
1499                case WLAN_SP_MESH_PEERING_OPEN:
1500                case WLAN_SP_MESH_PEERING_CLOSE:
1501                case WLAN_SP_MESH_PEERING_CONFIRM:
1502                        mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
1503                        break;
1504                }
1505                break;
1506        case WLAN_CATEGORY_MESH_ACTION:
1507                if (mesh_action_is_path_sel(mgmt))
1508                        mesh_rx_path_sel_frame(sdata, mgmt, len);
1509                break;
1510        case WLAN_CATEGORY_SPECTRUM_MGMT:
1511                mesh_rx_csa_frame(sdata, mgmt, len);
1512                break;
1513        }
1514}
1515
1516void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
1517                                   struct sk_buff *skb)
1518{
1519        struct ieee80211_rx_status *rx_status;
1520        struct ieee80211_mgmt *mgmt;
1521        u16 stype;
1522
1523        sdata_lock(sdata);
1524
1525        /* mesh already went down */
1526        if (!sdata->u.mesh.mesh_id_len)
1527                goto out;
1528
1529        rx_status = IEEE80211_SKB_RXCB(skb);
1530        mgmt = (struct ieee80211_mgmt *) skb->data;
1531        stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE;
1532
1533        switch (stype) {
1534        case IEEE80211_STYPE_PROBE_RESP:
1535        case IEEE80211_STYPE_BEACON:
1536                ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len,
1537                                            rx_status);
1538                break;
1539        case IEEE80211_STYPE_PROBE_REQ:
1540                ieee80211_mesh_rx_probe_req(sdata, mgmt, skb->len);
1541                break;
1542        case IEEE80211_STYPE_ACTION:
1543                ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status);
1544                break;
1545        }
1546out:
1547        sdata_unlock(sdata);
1548}
1549
1550static void mesh_bss_info_changed(struct ieee80211_sub_if_data *sdata)
1551{
1552        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1553        u32 bit, changed = 0;
1554
1555        for_each_set_bit(bit, &ifmsh->mbss_changed,
1556                         sizeof(changed) * BITS_PER_BYTE) {
1557                clear_bit(bit, &ifmsh->mbss_changed);
1558                changed |= BIT(bit);
1559        }
1560
1561        if (sdata->vif.bss_conf.enable_beacon &&
1562            (changed & (BSS_CHANGED_BEACON |
1563                        BSS_CHANGED_HT |
1564                        BSS_CHANGED_BASIC_RATES |
1565                        BSS_CHANGED_BEACON_INT)))
1566                if (ieee80211_mesh_rebuild_beacon(sdata))
1567                        return;
1568
1569        ieee80211_bss_info_change_notify(sdata, changed);
1570}
1571
1572void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata)
1573{
1574        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1575
1576        sdata_lock(sdata);
1577
1578        /* mesh already went down */
1579        if (!sdata->u.mesh.mesh_id_len)
1580                goto out;
1581
1582        if (ifmsh->preq_queue_len &&
1583            time_after(jiffies,
1584                       ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval)))
1585                mesh_path_start_discovery(sdata);
1586
1587        if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags))
1588                ieee80211_mesh_housekeeping(sdata);
1589
1590        if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags))
1591                ieee80211_mesh_rootpath(sdata);
1592
1593        if (test_and_clear_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags))
1594                mesh_sync_adjust_tsf(sdata);
1595
1596        if (test_and_clear_bit(MESH_WORK_MBSS_CHANGED, &ifmsh->wrkq_flags))
1597                mesh_bss_info_changed(sdata);
1598out:
1599        sdata_unlock(sdata);
1600}
1601
1602
1603void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
1604{
1605        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
1606        static u8 zero_addr[ETH_ALEN] = {};
1607
1608        timer_setup(&ifmsh->housekeeping_timer,
1609                    ieee80211_mesh_housekeeping_timer, 0);
1610
1611        ifmsh->accepting_plinks = true;
1612        atomic_set(&ifmsh->mpaths, 0);
1613        mesh_rmc_init(sdata);
1614        ifmsh->last_preq = jiffies;
1615        ifmsh->next_perr = jiffies;
1616        ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE;
1617        /* Allocate all mesh structures when creating the first mesh interface. */
1618        if (!mesh_allocated)
1619                ieee80211s_init();
1620
1621        mesh_pathtbl_init(sdata);
1622
1623        timer_setup(&ifmsh->mesh_path_timer, ieee80211_mesh_path_timer, 0);
1624        timer_setup(&ifmsh->mesh_path_root_timer,
1625                    ieee80211_mesh_path_root_timer, 0);
1626        INIT_LIST_HEAD(&ifmsh->preq_queue.list);
1627        skb_queue_head_init(&ifmsh->ps.bc_buf);
1628        spin_lock_init(&ifmsh->mesh_preq_queue_lock);
1629        spin_lock_init(&ifmsh->sync_offset_lock);
1630        RCU_INIT_POINTER(ifmsh->beacon, NULL);
1631
1632        sdata->vif.bss_conf.bssid = zero_addr;
1633}
1634
1635void ieee80211_mesh_teardown_sdata(struct ieee80211_sub_if_data *sdata)
1636{
1637        mesh_rmc_free(sdata);
1638        mesh_pathtbl_unregister(sdata);
1639}
1640