linux/sound/soc/intel/boards/bytcht_es8316.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 *  bytcht_es8316.c - ASoc Machine driver for Intel Baytrail/Cherrytrail
   4 *                    platforms with Everest ES8316 SoC
   5 *
   6 *  Copyright (C) 2017 Endless Mobile, Inc.
   7 *  Authors: David Yang <yangxiaohua@everest-semi.com>,
   8 *           Daniel Drake <drake@endlessm.com>
   9 *
  10 *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  11 *
  12 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  13 */
  14#include <linux/acpi.h>
  15#include <linux/clk.h>
  16#include <linux/device.h>
  17#include <linux/dmi.h>
  18#include <linux/gpio/consumer.h>
  19#include <linux/i2c.h>
  20#include <linux/init.h>
  21#include <linux/input.h>
  22#include <linux/module.h>
  23#include <linux/platform_device.h>
  24#include <linux/slab.h>
  25#include <sound/jack.h>
  26#include <sound/pcm.h>
  27#include <sound/pcm_params.h>
  28#include <sound/soc.h>
  29#include <sound/soc-acpi.h>
  30#include "../atom/sst-atom-controls.h"
  31#include "../common/soc-intel-quirks.h"
  32
  33/* jd-inv + terminating entry */
  34#define MAX_NO_PROPS 2
  35
  36struct byt_cht_es8316_private {
  37        struct clk *mclk;
  38        struct snd_soc_jack jack;
  39        struct gpio_desc *speaker_en_gpio;
  40        bool speaker_en;
  41};
  42
  43enum {
  44        BYT_CHT_ES8316_INTMIC_IN1_MAP,
  45        BYT_CHT_ES8316_INTMIC_IN2_MAP,
  46};
  47
  48#define BYT_CHT_ES8316_MAP(quirk)               ((quirk) & GENMASK(3, 0))
  49#define BYT_CHT_ES8316_SSP0                     BIT(16)
  50#define BYT_CHT_ES8316_MONO_SPEAKER             BIT(17)
  51#define BYT_CHT_ES8316_JD_INVERTED              BIT(18)
  52
  53static unsigned long quirk;
  54
  55static int quirk_override = -1;
  56module_param_named(quirk, quirk_override, int, 0444);
  57MODULE_PARM_DESC(quirk, "Board-specific quirk override");
  58
  59static void log_quirks(struct device *dev)
  60{
  61        if (BYT_CHT_ES8316_MAP(quirk) == BYT_CHT_ES8316_INTMIC_IN1_MAP)
  62                dev_info(dev, "quirk IN1_MAP enabled");
  63        if (BYT_CHT_ES8316_MAP(quirk) == BYT_CHT_ES8316_INTMIC_IN2_MAP)
  64                dev_info(dev, "quirk IN2_MAP enabled");
  65        if (quirk & BYT_CHT_ES8316_SSP0)
  66                dev_info(dev, "quirk SSP0 enabled");
  67        if (quirk & BYT_CHT_ES8316_MONO_SPEAKER)
  68                dev_info(dev, "quirk MONO_SPEAKER enabled\n");
  69        if (quirk & BYT_CHT_ES8316_JD_INVERTED)
  70                dev_info(dev, "quirk JD_INVERTED enabled\n");
  71}
  72
  73static int byt_cht_es8316_speaker_power_event(struct snd_soc_dapm_widget *w,
  74        struct snd_kcontrol *kcontrol, int event)
  75{
  76        struct snd_soc_card *card = w->dapm->card;
  77        struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card);
  78
  79        if (SND_SOC_DAPM_EVENT_ON(event))
  80                priv->speaker_en = true;
  81        else
  82                priv->speaker_en = false;
  83
  84        gpiod_set_value_cansleep(priv->speaker_en_gpio, priv->speaker_en);
  85
  86        return 0;
  87}
  88
  89static const struct snd_soc_dapm_widget byt_cht_es8316_widgets[] = {
  90        SND_SOC_DAPM_SPK("Speaker", NULL),
  91        SND_SOC_DAPM_HP("Headphone", NULL),
  92        SND_SOC_DAPM_MIC("Headset Mic", NULL),
  93        SND_SOC_DAPM_MIC("Internal Mic", NULL),
  94
  95        SND_SOC_DAPM_SUPPLY("Speaker Power", SND_SOC_NOPM, 0, 0,
  96                            byt_cht_es8316_speaker_power_event,
  97                            SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
  98};
  99
 100static const struct snd_soc_dapm_route byt_cht_es8316_audio_map[] = {
 101        {"Headphone", NULL, "HPOL"},
 102        {"Headphone", NULL, "HPOR"},
 103
 104        /*
 105         * There is no separate speaker output instead the speakers are muxed to
 106         * the HP outputs. The mux is controlled by the "Speaker Power" supply.
 107         */
 108        {"Speaker", NULL, "HPOL"},
 109        {"Speaker", NULL, "HPOR"},
 110        {"Speaker", NULL, "Speaker Power"},
 111};
 112
 113static const struct snd_soc_dapm_route byt_cht_es8316_intmic_in1_map[] = {
 114        {"MIC1", NULL, "Internal Mic"},
 115        {"MIC2", NULL, "Headset Mic"},
 116};
 117
 118static const struct snd_soc_dapm_route byt_cht_es8316_intmic_in2_map[] = {
 119        {"MIC2", NULL, "Internal Mic"},
 120        {"MIC1", NULL, "Headset Mic"},
 121};
 122
 123static const struct snd_soc_dapm_route byt_cht_es8316_ssp0_map[] = {
 124        {"Playback", NULL, "ssp0 Tx"},
 125        {"ssp0 Tx", NULL, "modem_out"},
 126        {"modem_in", NULL, "ssp0 Rx"},
 127        {"ssp0 Rx", NULL, "Capture"},
 128};
 129
 130static const struct snd_soc_dapm_route byt_cht_es8316_ssp2_map[] = {
 131        {"Playback", NULL, "ssp2 Tx"},
 132        {"ssp2 Tx", NULL, "codec_out0"},
 133        {"ssp2 Tx", NULL, "codec_out1"},
 134        {"codec_in0", NULL, "ssp2 Rx" },
 135        {"codec_in1", NULL, "ssp2 Rx" },
 136        {"ssp2 Rx", NULL, "Capture"},
 137};
 138
 139static const struct snd_kcontrol_new byt_cht_es8316_controls[] = {
 140        SOC_DAPM_PIN_SWITCH("Speaker"),
 141        SOC_DAPM_PIN_SWITCH("Headphone"),
 142        SOC_DAPM_PIN_SWITCH("Headset Mic"),
 143        SOC_DAPM_PIN_SWITCH("Internal Mic"),
 144};
 145
 146static struct snd_soc_jack_pin byt_cht_es8316_jack_pins[] = {
 147        {
 148                .pin    = "Headphone",
 149                .mask   = SND_JACK_HEADPHONE,
 150        },
 151        {
 152                .pin    = "Headset Mic",
 153                .mask   = SND_JACK_MICROPHONE,
 154        },
 155};
 156
 157static int byt_cht_es8316_init(struct snd_soc_pcm_runtime *runtime)
 158{
 159        struct snd_soc_component *codec = asoc_rtd_to_codec(runtime, 0)->component;
 160        struct snd_soc_card *card = runtime->card;
 161        struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card);
 162        const struct snd_soc_dapm_route *custom_map;
 163        int num_routes;
 164        int ret;
 165
 166        card->dapm.idle_bias_off = true;
 167
 168        switch (BYT_CHT_ES8316_MAP(quirk)) {
 169        case BYT_CHT_ES8316_INTMIC_IN1_MAP:
 170        default:
 171                custom_map = byt_cht_es8316_intmic_in1_map;
 172                num_routes = ARRAY_SIZE(byt_cht_es8316_intmic_in1_map);
 173                break;
 174        case BYT_CHT_ES8316_INTMIC_IN2_MAP:
 175                custom_map = byt_cht_es8316_intmic_in2_map;
 176                num_routes = ARRAY_SIZE(byt_cht_es8316_intmic_in2_map);
 177                break;
 178        }
 179        ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes);
 180        if (ret)
 181                return ret;
 182
 183        if (quirk & BYT_CHT_ES8316_SSP0) {
 184                custom_map = byt_cht_es8316_ssp0_map;
 185                num_routes = ARRAY_SIZE(byt_cht_es8316_ssp0_map);
 186        } else {
 187                custom_map = byt_cht_es8316_ssp2_map;
 188                num_routes = ARRAY_SIZE(byt_cht_es8316_ssp2_map);
 189        }
 190        ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes);
 191        if (ret)
 192                return ret;
 193
 194        /*
 195         * The firmware might enable the clock at boot (this information
 196         * may or may not be reflected in the enable clock register).
 197         * To change the rate we must disable the clock first to cover these
 198         * cases. Due to common clock framework restrictions that do not allow
 199         * to disable a clock that has not been enabled, we need to enable
 200         * the clock first.
 201         */
 202        ret = clk_prepare_enable(priv->mclk);
 203        if (!ret)
 204                clk_disable_unprepare(priv->mclk);
 205
 206        ret = clk_set_rate(priv->mclk, 19200000);
 207        if (ret)
 208                dev_err(card->dev, "unable to set MCLK rate\n");
 209
 210        ret = clk_prepare_enable(priv->mclk);
 211        if (ret)
 212                dev_err(card->dev, "unable to enable MCLK\n");
 213
 214        ret = snd_soc_dai_set_sysclk(asoc_rtd_to_codec(runtime, 0), 0, 19200000,
 215                                     SND_SOC_CLOCK_IN);
 216        if (ret < 0) {
 217                dev_err(card->dev, "can't set codec clock %d\n", ret);
 218                return ret;
 219        }
 220
 221        ret = snd_soc_card_jack_new(card, "Headset",
 222                                    SND_JACK_HEADSET | SND_JACK_BTN_0,
 223                                    &priv->jack, byt_cht_es8316_jack_pins,
 224                                    ARRAY_SIZE(byt_cht_es8316_jack_pins));
 225        if (ret) {
 226                dev_err(card->dev, "jack creation failed %d\n", ret);
 227                return ret;
 228        }
 229
 230        snd_jack_set_key(priv->jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
 231        snd_soc_component_set_jack(codec, &priv->jack, NULL);
 232
 233        return 0;
 234}
 235
 236static int byt_cht_es8316_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 237                            struct snd_pcm_hw_params *params)
 238{
 239        struct snd_interval *rate = hw_param_interval(params,
 240                        SNDRV_PCM_HW_PARAM_RATE);
 241        struct snd_interval *channels = hw_param_interval(params,
 242                                                SNDRV_PCM_HW_PARAM_CHANNELS);
 243        int ret, bits;
 244
 245        /* The DSP will covert the FE rate to 48k, stereo */
 246        rate->min = rate->max = 48000;
 247        channels->min = channels->max = 2;
 248
 249        if (quirk & BYT_CHT_ES8316_SSP0) {
 250                /* set SSP0 to 16-bit */
 251                params_set_format(params, SNDRV_PCM_FORMAT_S16_LE);
 252                bits = 16;
 253        } else {
 254                /* set SSP2 to 24-bit */
 255                params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
 256                bits = 24;
 257        }
 258
 259        /*
 260         * Default mode for SSP configuration is TDM 4 slot, override config
 261         * with explicit setting to I2S 2ch 24-bit. The word length is set with
 262         * dai_set_tdm_slot() since there is no other API exposed
 263         */
 264        ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0),
 265                                SND_SOC_DAIFMT_I2S     |
 266                                SND_SOC_DAIFMT_NB_NF   |
 267                                SND_SOC_DAIFMT_CBS_CFS
 268                );
 269        if (ret < 0) {
 270                dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret);
 271                return ret;
 272        }
 273
 274        ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, bits);
 275        if (ret < 0) {
 276                dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
 277                return ret;
 278        }
 279
 280        return 0;
 281}
 282
 283static int byt_cht_es8316_aif1_startup(struct snd_pcm_substream *substream)
 284{
 285        return snd_pcm_hw_constraint_single(substream->runtime,
 286                        SNDRV_PCM_HW_PARAM_RATE, 48000);
 287}
 288
 289static const struct snd_soc_ops byt_cht_es8316_aif1_ops = {
 290        .startup = byt_cht_es8316_aif1_startup,
 291};
 292
 293SND_SOC_DAILINK_DEF(dummy,
 294        DAILINK_COMP_ARRAY(COMP_DUMMY()));
 295
 296SND_SOC_DAILINK_DEF(media,
 297        DAILINK_COMP_ARRAY(COMP_CPU("media-cpu-dai")));
 298
 299SND_SOC_DAILINK_DEF(deepbuffer,
 300        DAILINK_COMP_ARRAY(COMP_CPU("deepbuffer-cpu-dai")));
 301
 302SND_SOC_DAILINK_DEF(ssp2_port,
 303        DAILINK_COMP_ARRAY(COMP_CPU("ssp2-port")));
 304SND_SOC_DAILINK_DEF(ssp2_codec,
 305        DAILINK_COMP_ARRAY(COMP_CODEC("i2c-ESSX8316:00", "ES8316 HiFi")));
 306
 307SND_SOC_DAILINK_DEF(platform,
 308        DAILINK_COMP_ARRAY(COMP_PLATFORM("sst-mfld-platform")));
 309
 310static struct snd_soc_dai_link byt_cht_es8316_dais[] = {
 311        [MERR_DPCM_AUDIO] = {
 312                .name = "Audio Port",
 313                .stream_name = "Audio",
 314                .nonatomic = true,
 315                .dynamic = 1,
 316                .dpcm_playback = 1,
 317                .dpcm_capture = 1,
 318                .ops = &byt_cht_es8316_aif1_ops,
 319                SND_SOC_DAILINK_REG(media, dummy, platform),
 320        },
 321
 322        [MERR_DPCM_DEEP_BUFFER] = {
 323                .name = "Deep-Buffer Audio Port",
 324                .stream_name = "Deep-Buffer Audio",
 325                .nonatomic = true,
 326                .dynamic = 1,
 327                .dpcm_playback = 1,
 328                .ops = &byt_cht_es8316_aif1_ops,
 329                SND_SOC_DAILINK_REG(deepbuffer, dummy, platform),
 330        },
 331
 332                /* back ends */
 333        {
 334                .name = "SSP2-Codec",
 335                .id = 0,
 336                .no_pcm = 1,
 337                .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
 338                                                | SND_SOC_DAIFMT_CBS_CFS,
 339                .be_hw_params_fixup = byt_cht_es8316_codec_fixup,
 340                .nonatomic = true,
 341                .dpcm_playback = 1,
 342                .dpcm_capture = 1,
 343                .init = byt_cht_es8316_init,
 344                SND_SOC_DAILINK_REG(ssp2_port, ssp2_codec, platform),
 345        },
 346};
 347
 348
 349/* SoC card */
 350static char codec_name[SND_ACPI_I2C_ID_LEN];
 351#if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES)
 352static char long_name[50]; /* = "bytcht-es8316-*-spk-*-mic" */
 353#endif
 354static char components_string[32]; /* = "cfg-spk:* cfg-mic:* */
 355
 356static int byt_cht_es8316_suspend(struct snd_soc_card *card)
 357{
 358        struct snd_soc_component *component;
 359
 360        for_each_card_components(card, component) {
 361                if (!strcmp(component->name, codec_name)) {
 362                        dev_dbg(component->dev, "disabling jack detect before suspend\n");
 363                        snd_soc_component_set_jack(component, NULL, NULL);
 364                        break;
 365                }
 366        }
 367
 368        return 0;
 369}
 370
 371static int byt_cht_es8316_resume(struct snd_soc_card *card)
 372{
 373        struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card);
 374        struct snd_soc_component *component;
 375
 376        for_each_card_components(card, component) {
 377                if (!strcmp(component->name, codec_name)) {
 378                        dev_dbg(component->dev, "re-enabling jack detect after resume\n");
 379                        snd_soc_component_set_jack(component, &priv->jack, NULL);
 380                        break;
 381                }
 382        }
 383
 384        /*
 385         * Some Cherry Trail boards with an ES8316 codec have a bug in their
 386         * ACPI tables where the MSSL1680 touchscreen's _PS0 and _PS3 methods
 387         * wrongly also set the speaker-enable GPIO to 1/0. Testing has shown
 388         * that this really is a bug and the GPIO has no influence on the
 389         * touchscreen at all.
 390         *
 391         * The silead.c touchscreen driver does not support runtime suspend, so
 392         * the GPIO can only be changed underneath us during a system suspend.
 393         * This resume() function runs from a pm complete() callback, and thus
 394         * is guaranteed to run after the touchscreen driver/ACPI-subsys has
 395         * brought the touchscreen back up again (and thus changed the GPIO).
 396         *
 397         * So to work around this we pass GPIOD_FLAGS_BIT_NONEXCLUSIVE when
 398         * requesting the GPIO and we set its value here to undo any changes
 399         * done by the touchscreen's broken _PS0 ACPI method.
 400         */
 401        gpiod_set_value_cansleep(priv->speaker_en_gpio, priv->speaker_en);
 402
 403        return 0;
 404}
 405
 406/* use space before codec name to simplify card ID, and simplify driver name */
 407#define SOF_CARD_NAME "bytcht es8316" /* card name will be 'sof-bytcht es8316' */
 408#define SOF_DRIVER_NAME "SOF"
 409
 410#define CARD_NAME "bytcht-es8316"
 411#define DRIVER_NAME NULL /* card name will be used for driver name */
 412
 413static struct snd_soc_card byt_cht_es8316_card = {
 414        .owner = THIS_MODULE,
 415        .dai_link = byt_cht_es8316_dais,
 416        .num_links = ARRAY_SIZE(byt_cht_es8316_dais),
 417        .dapm_widgets = byt_cht_es8316_widgets,
 418        .num_dapm_widgets = ARRAY_SIZE(byt_cht_es8316_widgets),
 419        .dapm_routes = byt_cht_es8316_audio_map,
 420        .num_dapm_routes = ARRAY_SIZE(byt_cht_es8316_audio_map),
 421        .controls = byt_cht_es8316_controls,
 422        .num_controls = ARRAY_SIZE(byt_cht_es8316_controls),
 423        .fully_routed = true,
 424        .suspend_pre = byt_cht_es8316_suspend,
 425        .resume_post = byt_cht_es8316_resume,
 426};
 427
 428static const struct acpi_gpio_params first_gpio = { 0, 0, false };
 429
 430static const struct acpi_gpio_mapping byt_cht_es8316_gpios[] = {
 431        { "speaker-enable-gpios", &first_gpio, 1 },
 432        { },
 433};
 434
 435/* Please keep this list alphabetically sorted */
 436static const struct dmi_system_id byt_cht_es8316_quirk_table[] = {
 437        {       /* Irbis NB41 */
 438                .matches = {
 439                        DMI_MATCH(DMI_SYS_VENDOR, "IRBIS"),
 440                        DMI_MATCH(DMI_PRODUCT_NAME, "NB41"),
 441                },
 442                .driver_data = (void *)(BYT_CHT_ES8316_SSP0
 443                                        | BYT_CHT_ES8316_INTMIC_IN2_MAP
 444                                        | BYT_CHT_ES8316_JD_INVERTED),
 445        },
 446        {       /* Teclast X98 Plus II */
 447                .matches = {
 448                        DMI_MATCH(DMI_SYS_VENDOR, "TECLAST"),
 449                        DMI_MATCH(DMI_PRODUCT_NAME, "X98 Plus II"),
 450                },
 451                .driver_data = (void *)(BYT_CHT_ES8316_INTMIC_IN1_MAP
 452                                        | BYT_CHT_ES8316_JD_INVERTED),
 453        },
 454        {}
 455};
 456
 457static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
 458{
 459        static const char * const mic_name[] = { "in1", "in2" };
 460        struct property_entry props[MAX_NO_PROPS] = {};
 461        struct byt_cht_es8316_private *priv;
 462        const struct dmi_system_id *dmi_id;
 463        struct device *dev = &pdev->dev;
 464        struct snd_soc_acpi_mach *mach;
 465        const char *platform_name;
 466        struct acpi_device *adev;
 467        struct device *codec_dev;
 468        bool sof_parent;
 469        unsigned int cnt = 0;
 470        int dai_index = 0;
 471        int i;
 472        int ret = 0;
 473
 474        priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 475        if (!priv)
 476                return -ENOMEM;
 477
 478        mach = dev->platform_data;
 479        /* fix index of codec dai */
 480        for (i = 0; i < ARRAY_SIZE(byt_cht_es8316_dais); i++) {
 481                if (!strcmp(byt_cht_es8316_dais[i].codecs->name,
 482                            "i2c-ESSX8316:00")) {
 483                        dai_index = i;
 484                        break;
 485                }
 486        }
 487
 488        /* fixup codec name based on HID */
 489        adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1);
 490        if (adev) {
 491                snprintf(codec_name, sizeof(codec_name),
 492                         "i2c-%s", acpi_dev_name(adev));
 493                put_device(&adev->dev);
 494                byt_cht_es8316_dais[dai_index].codecs->name = codec_name;
 495        }
 496
 497        /* override plaform name, if required */
 498        byt_cht_es8316_card.dev = dev;
 499        platform_name = mach->mach_params.platform;
 500
 501        ret = snd_soc_fixup_dai_links_platform_name(&byt_cht_es8316_card,
 502                                                    platform_name);
 503        if (ret)
 504                return ret;
 505
 506        /* Check for BYTCR or other platform and setup quirks */
 507        dmi_id = dmi_first_match(byt_cht_es8316_quirk_table);
 508        if (dmi_id) {
 509                quirk = (unsigned long)dmi_id->driver_data;
 510        } else if (soc_intel_is_byt() &&
 511                   mach->mach_params.acpi_ipc_irq_index == 0) {
 512                /* On BYTCR default to SSP0, internal-mic-in2-map, mono-spk */
 513                quirk = BYT_CHT_ES8316_SSP0 | BYT_CHT_ES8316_INTMIC_IN2_MAP |
 514                        BYT_CHT_ES8316_MONO_SPEAKER;
 515        } else {
 516                /* Others default to internal-mic-in1-map, mono-speaker */
 517                quirk = BYT_CHT_ES8316_INTMIC_IN1_MAP |
 518                        BYT_CHT_ES8316_MONO_SPEAKER;
 519        }
 520        if (quirk_override != -1) {
 521                dev_info(dev, "Overriding quirk 0x%lx => 0x%x\n",
 522                         quirk, quirk_override);
 523                quirk = quirk_override;
 524        }
 525        log_quirks(dev);
 526
 527        if (quirk & BYT_CHT_ES8316_SSP0)
 528                byt_cht_es8316_dais[dai_index].cpus->dai_name = "ssp0-port";
 529
 530        /* get the clock */
 531        priv->mclk = devm_clk_get(dev, "pmc_plt_clk_3");
 532        if (IS_ERR(priv->mclk)) {
 533                ret = PTR_ERR(priv->mclk);
 534                dev_err(dev, "clk_get pmc_plt_clk_3 failed: %d\n", ret);
 535                return ret;
 536        }
 537
 538        /* get speaker enable GPIO */
 539        codec_dev = bus_find_device_by_name(&i2c_bus_type, NULL, codec_name);
 540        if (!codec_dev)
 541                return -EPROBE_DEFER;
 542
 543        if (quirk & BYT_CHT_ES8316_JD_INVERTED)
 544                props[cnt++] = PROPERTY_ENTRY_BOOL("everest,jack-detect-inverted");
 545
 546        if (cnt) {
 547                ret = device_add_properties(codec_dev, props);
 548                if (ret) {
 549                        put_device(codec_dev);
 550                        return ret;
 551                }
 552        }
 553
 554        devm_acpi_dev_add_driver_gpios(codec_dev, byt_cht_es8316_gpios);
 555        priv->speaker_en_gpio =
 556                gpiod_get_index(codec_dev, "speaker-enable", 0,
 557                                /* see comment in byt_cht_es8316_resume */
 558                                GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
 559        put_device(codec_dev);
 560
 561        if (IS_ERR(priv->speaker_en_gpio)) {
 562                ret = PTR_ERR(priv->speaker_en_gpio);
 563                switch (ret) {
 564                case -ENOENT:
 565                        priv->speaker_en_gpio = NULL;
 566                        break;
 567                default:
 568                        dev_err(dev, "get speaker GPIO failed: %d\n", ret);
 569                        fallthrough;
 570                case -EPROBE_DEFER:
 571                        return ret;
 572                }
 573        }
 574
 575        snprintf(components_string, sizeof(components_string),
 576                 "cfg-spk:%s cfg-mic:%s",
 577                 (quirk & BYT_CHT_ES8316_MONO_SPEAKER) ? "1" : "2",
 578                 mic_name[BYT_CHT_ES8316_MAP(quirk)]);
 579        byt_cht_es8316_card.components = components_string;
 580#if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES)
 581        snprintf(long_name, sizeof(long_name), "bytcht-es8316-%s-spk-%s-mic",
 582                 (quirk & BYT_CHT_ES8316_MONO_SPEAKER) ? "mono" : "stereo",
 583                 mic_name[BYT_CHT_ES8316_MAP(quirk)]);
 584        byt_cht_es8316_card.long_name = long_name;
 585#endif
 586
 587        sof_parent = snd_soc_acpi_sof_parent(&pdev->dev);
 588
 589        /* set card and driver name */
 590        if (sof_parent) {
 591                byt_cht_es8316_card.name = SOF_CARD_NAME;
 592                byt_cht_es8316_card.driver_name = SOF_DRIVER_NAME;
 593        } else {
 594                byt_cht_es8316_card.name = CARD_NAME;
 595                byt_cht_es8316_card.driver_name = DRIVER_NAME;
 596        }
 597
 598        /* set pm ops */
 599        if (sof_parent)
 600                dev->driver->pm = &snd_soc_pm_ops;
 601
 602        /* register the soc card */
 603        snd_soc_card_set_drvdata(&byt_cht_es8316_card, priv);
 604
 605        ret = devm_snd_soc_register_card(dev, &byt_cht_es8316_card);
 606        if (ret) {
 607                gpiod_put(priv->speaker_en_gpio);
 608                dev_err(dev, "snd_soc_register_card failed: %d\n", ret);
 609                return ret;
 610        }
 611        platform_set_drvdata(pdev, &byt_cht_es8316_card);
 612        return 0;
 613}
 614
 615static int snd_byt_cht_es8316_mc_remove(struct platform_device *pdev)
 616{
 617        struct snd_soc_card *card = platform_get_drvdata(pdev);
 618        struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card);
 619
 620        gpiod_put(priv->speaker_en_gpio);
 621        return 0;
 622}
 623
 624static struct platform_driver snd_byt_cht_es8316_mc_driver = {
 625        .driver = {
 626                .name = "bytcht_es8316",
 627        },
 628        .probe = snd_byt_cht_es8316_mc_probe,
 629        .remove = snd_byt_cht_es8316_mc_remove,
 630};
 631
 632module_platform_driver(snd_byt_cht_es8316_mc_driver);
 633MODULE_DESCRIPTION("ASoC Intel(R) Baytrail/Cherrytrail Machine driver");
 634MODULE_AUTHOR("David Yang <yangxiaohua@everest-semi.com>");
 635MODULE_LICENSE("GPL v2");
 636MODULE_ALIAS("platform:bytcht_es8316");
 637