1/* SPDX-License-Identifier: GPL-2.0 */ 2/****************************************************************************/ 3 4/* 5 * m52xxacr.h -- ColdFire version 2 core cache support 6 * 7 * (C) Copyright 2010, Greg Ungerer <gerg@snapgear.com> 8 */ 9 10/****************************************************************************/ 11#ifndef m52xxacr_h 12#define m52xxacr_h 13/****************************************************************************/ 14 15/* 16 * All varients of the ColdFire using version 2 cores have a similar 17 * cache setup. Although not absolutely identical the cache register 18 * definitions are compatible for all of them. Mostly they support a 19 * configurable cache memory that can be instruction only, data only, 20 * or split instruction and data. The exception is the very old version 2 21 * core based parts, like the 5206(e), 5249 and 5272, which are instruction 22 * cache only. Cache size varies from 2k up to 16k. 23 */ 24 25/* 26 * Define the Cache Control register flags. 27 */ 28#define CACR_CENB 0x80000000 /* Enable cache */ 29#define CACR_CDPI 0x10000000 /* Disable invalidation by CPUSHL */ 30#define CACR_CFRZ 0x08000000 /* Cache freeze mode */ 31#define CACR_CINV 0x01000000 /* Invalidate cache */ 32#define CACR_DISI 0x00800000 /* Disable instruction cache */ 33#define CACR_DISD 0x00400000 /* Disable data cache */ 34#define CACR_INVI 0x00200000 /* Invalidate instruction cache */ 35#define CACR_INVD 0x00100000 /* Invalidate data cache */ 36#define CACR_CEIB 0x00000400 /* Non-cachable instruction burst */ 37#define CACR_DCM 0x00000200 /* Default cache mode */ 38#define CACR_DBWE 0x00000100 /* Buffered write enable */ 39#define CACR_DWP 0x00000020 /* Write protection */ 40#define CACR_EUSP 0x00000010 /* Enable separate user a7 */ 41 42/* 43 * Define the Access Control register flags. 44 */ 45#define ACR_BASE_POS 24 /* Address Base (upper 8 bits) */ 46#define ACR_MASK_POS 16 /* Address Mask (next 8 bits) */ 47#define ACR_ENABLE 0x00008000 /* Enable this ACR */ 48#define ACR_USER 0x00000000 /* Allow only user accesses */ 49#define ACR_SUPER 0x00002000 /* Allow supervisor access only */ 50#define ACR_ANY 0x00004000 /* Allow any access type */ 51#define ACR_CENB 0x00000000 /* Caching of region enabled */ 52#define ACR_CDIS 0x00000040 /* Caching of region disabled */ 53#define ACR_BWE 0x00000020 /* Write buffer enabled */ 54#define ACR_WPROTECT 0x00000004 /* Write protect region */ 55 56/* 57 * Set the cache controller settings we will use. On the cores that support 58 * a split cache configuration we allow all the combinations at Kconfig 59 * time. For those cores that only have an instruction cache we just set 60 * that as on. 61 */ 62#if defined(CONFIG_CACHE_I) 63#define CACHE_TYPE (CACR_DISD + CACR_EUSP) 64#define CACHE_INVTYPEI 0 65#elif defined(CONFIG_CACHE_D) 66#define CACHE_TYPE (CACR_DISI + CACR_EUSP) 67#define CACHE_INVTYPED 0 68#elif defined(CONFIG_CACHE_BOTH) 69#define CACHE_TYPE CACR_EUSP 70#define CACHE_INVTYPEI CACR_INVI 71#define CACHE_INVTYPED CACR_INVD 72#else 73/* This is the instruction cache only devices (no split cache, no eusp) */ 74#define CACHE_TYPE 0 75#define CACHE_INVTYPEI 0 76#endif 77 78#define CACHE_INIT (CACR_CINV + CACHE_TYPE) 79#define CACHE_MODE (CACR_CENB + CACHE_TYPE + CACR_DCM) 80 81#define CACHE_INVALIDATE (CACHE_MODE + CACR_CINV) 82#if defined(CACHE_INVTYPEI) 83#define CACHE_INVALIDATEI (CACHE_MODE + CACR_CINV + CACHE_INVTYPEI) 84#endif 85#if defined(CACHE_INVTYPED) 86#define CACHE_INVALIDATED (CACHE_MODE + CACR_CINV + CACHE_INVTYPED) 87#endif 88 89#define ACR0_MODE ((CONFIG_RAMBASE & 0xff000000) + \ 90 (0x000f0000) + \ 91 (ACR_ENABLE + ACR_ANY + ACR_CENB + ACR_BWE)) 92#define ACR1_MODE 0 93 94/****************************************************************************/ 95#endif /* m52xxsim_h */ 96