linux/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * Copyright (C) 2014 Traphandler
   4 * Copyright (C) 2014 Free Electrons
   5 * Copyright (C) 2014 Atmel
   6 *
   7 * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
   8 * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
   9 */
  10
  11#include <linux/clk.h>
  12#include <linux/irq.h>
  13#include <linux/irqchip.h>
  14#include <linux/mfd/atmel-hlcdc.h>
  15#include <linux/module.h>
  16#include <linux/pm_runtime.h>
  17#include <linux/platform_device.h>
  18
  19#include <drm/drm_atomic.h>
  20#include <drm/drm_atomic_helper.h>
  21#include <drm/drm_drv.h>
  22#include <drm/drm_fb_helper.h>
  23#include <drm/drm_gem_cma_helper.h>
  24#include <drm/drm_gem_framebuffer_helper.h>
  25#include <drm/drm_irq.h>
  26#include <drm/drm_probe_helper.h>
  27#include <drm/drm_vblank.h>
  28
  29#include "atmel_hlcdc_dc.h"
  30
  31#define ATMEL_HLCDC_LAYER_IRQS_OFFSET           8
  32
  33static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9n12_layers[] = {
  34        {
  35                .name = "base",
  36                .formats = &atmel_hlcdc_plane_rgb_formats,
  37                .regs_offset = 0x40,
  38                .id = 0,
  39                .type = ATMEL_HLCDC_BASE_LAYER,
  40                .cfgs_offset = 0x2c,
  41                .layout = {
  42                        .xstride = { 2 },
  43                        .default_color = 3,
  44                        .general_config = 4,
  45                },
  46                .clut_offset = 0x400,
  47        },
  48};
  49
  50static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_at91sam9n12 = {
  51        .min_width = 0,
  52        .min_height = 0,
  53        .max_width = 1280,
  54        .max_height = 860,
  55        .max_spw = 0x3f,
  56        .max_vpw = 0x3f,
  57        .max_hpw = 0xff,
  58        .conflicting_output_formats = true,
  59        .nlayers = ARRAY_SIZE(atmel_hlcdc_at91sam9n12_layers),
  60        .layers = atmel_hlcdc_at91sam9n12_layers,
  61};
  62
  63static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = {
  64        {
  65                .name = "base",
  66                .formats = &atmel_hlcdc_plane_rgb_formats,
  67                .regs_offset = 0x40,
  68                .id = 0,
  69                .type = ATMEL_HLCDC_BASE_LAYER,
  70                .cfgs_offset = 0x2c,
  71                .layout = {
  72                        .xstride = { 2 },
  73                        .default_color = 3,
  74                        .general_config = 4,
  75                        .disc_pos = 5,
  76                        .disc_size = 6,
  77                },
  78                .clut_offset = 0x400,
  79        },
  80        {
  81                .name = "overlay1",
  82                .formats = &atmel_hlcdc_plane_rgb_formats,
  83                .regs_offset = 0x100,
  84                .id = 1,
  85                .type = ATMEL_HLCDC_OVERLAY_LAYER,
  86                .cfgs_offset = 0x2c,
  87                .layout = {
  88                        .pos = 2,
  89                        .size = 3,
  90                        .xstride = { 4 },
  91                        .pstride = { 5 },
  92                        .default_color = 6,
  93                        .chroma_key = 7,
  94                        .chroma_key_mask = 8,
  95                        .general_config = 9,
  96                },
  97                .clut_offset = 0x800,
  98        },
  99        {
 100                .name = "high-end-overlay",
 101                .formats = &atmel_hlcdc_plane_rgb_and_yuv_formats,
 102                .regs_offset = 0x280,
 103                .id = 2,
 104                .type = ATMEL_HLCDC_OVERLAY_LAYER,
 105                .cfgs_offset = 0x4c,
 106                .layout = {
 107                        .pos = 2,
 108                        .size = 3,
 109                        .memsize = 4,
 110                        .xstride = { 5, 7 },
 111                        .pstride = { 6, 8 },
 112                        .default_color = 9,
 113                        .chroma_key = 10,
 114                        .chroma_key_mask = 11,
 115                        .general_config = 12,
 116                        .scaler_config = 13,
 117                        .csc = 14,
 118                },
 119                .clut_offset = 0x1000,
 120        },
 121        {
 122                .name = "cursor",
 123                .formats = &atmel_hlcdc_plane_rgb_formats,
 124                .regs_offset = 0x340,
 125                .id = 3,
 126                .type = ATMEL_HLCDC_CURSOR_LAYER,
 127                .max_width = 128,
 128                .max_height = 128,
 129                .cfgs_offset = 0x2c,
 130                .layout = {
 131                        .pos = 2,
 132                        .size = 3,
 133                        .xstride = { 4 },
 134                        .default_color = 6,
 135                        .chroma_key = 7,
 136                        .chroma_key_mask = 8,
 137                        .general_config = 9,
 138                },
 139                .clut_offset = 0x1400,
 140        },
 141};
 142
 143static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_at91sam9x5 = {
 144        .min_width = 0,
 145        .min_height = 0,
 146        .max_width = 800,
 147        .max_height = 600,
 148        .max_spw = 0x3f,
 149        .max_vpw = 0x3f,
 150        .max_hpw = 0xff,
 151        .conflicting_output_formats = true,
 152        .nlayers = ARRAY_SIZE(atmel_hlcdc_at91sam9x5_layers),
 153        .layers = atmel_hlcdc_at91sam9x5_layers,
 154};
 155
 156static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
 157        {
 158                .name = "base",
 159                .formats = &atmel_hlcdc_plane_rgb_formats,
 160                .regs_offset = 0x40,
 161                .id = 0,
 162                .type = ATMEL_HLCDC_BASE_LAYER,
 163                .cfgs_offset = 0x2c,
 164                .layout = {
 165                        .xstride = { 2 },
 166                        .default_color = 3,
 167                        .general_config = 4,
 168                        .disc_pos = 5,
 169                        .disc_size = 6,
 170                },
 171                .clut_offset = 0x600,
 172        },
 173        {
 174                .name = "overlay1",
 175                .formats = &atmel_hlcdc_plane_rgb_formats,
 176                .regs_offset = 0x140,
 177                .id = 1,
 178                .type = ATMEL_HLCDC_OVERLAY_LAYER,
 179                .cfgs_offset = 0x2c,
 180                .layout = {
 181                        .pos = 2,
 182                        .size = 3,
 183                        .xstride = { 4 },
 184                        .pstride = { 5 },
 185                        .default_color = 6,
 186                        .chroma_key = 7,
 187                        .chroma_key_mask = 8,
 188                        .general_config = 9,
 189                },
 190                .clut_offset = 0xa00,
 191        },
 192        {
 193                .name = "overlay2",
 194                .formats = &atmel_hlcdc_plane_rgb_formats,
 195                .regs_offset = 0x240,
 196                .id = 2,
 197                .type = ATMEL_HLCDC_OVERLAY_LAYER,
 198                .cfgs_offset = 0x2c,
 199                .layout = {
 200                        .pos = 2,
 201                        .size = 3,
 202                        .xstride = { 4 },
 203                        .pstride = { 5 },
 204                        .default_color = 6,
 205                        .chroma_key = 7,
 206                        .chroma_key_mask = 8,
 207                        .general_config = 9,
 208                },
 209                .clut_offset = 0xe00,
 210        },
 211        {
 212                .name = "high-end-overlay",
 213                .formats = &atmel_hlcdc_plane_rgb_and_yuv_formats,
 214                .regs_offset = 0x340,
 215                .id = 3,
 216                .type = ATMEL_HLCDC_OVERLAY_LAYER,
 217                .cfgs_offset = 0x4c,
 218                .layout = {
 219                        .pos = 2,
 220                        .size = 3,
 221                        .memsize = 4,
 222                        .xstride = { 5, 7 },
 223                        .pstride = { 6, 8 },
 224                        .default_color = 9,
 225                        .chroma_key = 10,
 226                        .chroma_key_mask = 11,
 227                        .general_config = 12,
 228                        .scaler_config = 13,
 229                        .phicoeffs = {
 230                                .x = 17,
 231                                .y = 33,
 232                        },
 233                        .csc = 14,
 234                },
 235                .clut_offset = 0x1200,
 236        },
 237        {
 238                .name = "cursor",
 239                .formats = &atmel_hlcdc_plane_rgb_formats,
 240                .regs_offset = 0x440,
 241                .id = 4,
 242                .type = ATMEL_HLCDC_CURSOR_LAYER,
 243                .max_width = 128,
 244                .max_height = 128,
 245                .cfgs_offset = 0x2c,
 246                .layout = {
 247                        .pos = 2,
 248                        .size = 3,
 249                        .xstride = { 4 },
 250                        .pstride = { 5 },
 251                        .default_color = 6,
 252                        .chroma_key = 7,
 253                        .chroma_key_mask = 8,
 254                        .general_config = 9,
 255                        .scaler_config = 13,
 256                },
 257                .clut_offset = 0x1600,
 258        },
 259};
 260
 261static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sama5d3 = {
 262        .min_width = 0,
 263        .min_height = 0,
 264        .max_width = 2048,
 265        .max_height = 2048,
 266        .max_spw = 0x3f,
 267        .max_vpw = 0x3f,
 268        .max_hpw = 0x1ff,
 269        .conflicting_output_formats = true,
 270        .nlayers = ARRAY_SIZE(atmel_hlcdc_sama5d3_layers),
 271        .layers = atmel_hlcdc_sama5d3_layers,
 272};
 273
 274static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d4_layers[] = {
 275        {
 276                .name = "base",
 277                .formats = &atmel_hlcdc_plane_rgb_formats,
 278                .regs_offset = 0x40,
 279                .id = 0,
 280                .type = ATMEL_HLCDC_BASE_LAYER,
 281                .cfgs_offset = 0x2c,
 282                .layout = {
 283                        .xstride = { 2 },
 284                        .default_color = 3,
 285                        .general_config = 4,
 286                        .disc_pos = 5,
 287                        .disc_size = 6,
 288                },
 289                .clut_offset = 0x600,
 290        },
 291        {
 292                .name = "overlay1",
 293                .formats = &atmel_hlcdc_plane_rgb_formats,
 294                .regs_offset = 0x140,
 295                .id = 1,
 296                .type = ATMEL_HLCDC_OVERLAY_LAYER,
 297                .cfgs_offset = 0x2c,
 298                .layout = {
 299                        .pos = 2,
 300                        .size = 3,
 301                        .xstride = { 4 },
 302                        .pstride = { 5 },
 303                        .default_color = 6,
 304                        .chroma_key = 7,
 305                        .chroma_key_mask = 8,
 306                        .general_config = 9,
 307                },
 308                .clut_offset = 0xa00,
 309        },
 310        {
 311                .name = "overlay2",
 312                .formats = &atmel_hlcdc_plane_rgb_formats,
 313                .regs_offset = 0x240,
 314                .id = 2,
 315                .type = ATMEL_HLCDC_OVERLAY_LAYER,
 316                .cfgs_offset = 0x2c,
 317                .layout = {
 318                        .pos = 2,
 319                        .size = 3,
 320                        .xstride = { 4 },
 321                        .pstride = { 5 },
 322                        .default_color = 6,
 323                        .chroma_key = 7,
 324                        .chroma_key_mask = 8,
 325                        .general_config = 9,
 326                },
 327                .clut_offset = 0xe00,
 328        },
 329        {
 330                .name = "high-end-overlay",
 331                .formats = &atmel_hlcdc_plane_rgb_and_yuv_formats,
 332                .regs_offset = 0x340,
 333                .id = 3,
 334                .type = ATMEL_HLCDC_OVERLAY_LAYER,
 335                .cfgs_offset = 0x4c,
 336                .layout = {
 337                        .pos = 2,
 338                        .size = 3,
 339                        .memsize = 4,
 340                        .xstride = { 5, 7 },
 341                        .pstride = { 6, 8 },
 342                        .default_color = 9,
 343                        .chroma_key = 10,
 344                        .chroma_key_mask = 11,
 345                        .general_config = 12,
 346                        .scaler_config = 13,
 347                        .phicoeffs = {
 348                                .x = 17,
 349                                .y = 33,
 350                        },
 351                        .csc = 14,
 352                },
 353                .clut_offset = 0x1200,
 354        },
 355};
 356
 357static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sama5d4 = {
 358        .min_width = 0,
 359        .min_height = 0,
 360        .max_width = 2048,
 361        .max_height = 2048,
 362        .max_spw = 0xff,
 363        .max_vpw = 0xff,
 364        .max_hpw = 0x3ff,
 365        .nlayers = ARRAY_SIZE(atmel_hlcdc_sama5d4_layers),
 366        .layers = atmel_hlcdc_sama5d4_layers,
 367};
 368
 369static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sam9x60_layers[] = {
 370        {
 371                .name = "base",
 372                .formats = &atmel_hlcdc_plane_rgb_formats,
 373                .regs_offset = 0x60,
 374                .id = 0,
 375                .type = ATMEL_HLCDC_BASE_LAYER,
 376                .cfgs_offset = 0x2c,
 377                .layout = {
 378                        .xstride = { 2 },
 379                        .default_color = 3,
 380                        .general_config = 4,
 381                        .disc_pos = 5,
 382                        .disc_size = 6,
 383                },
 384                .clut_offset = 0x600,
 385        },
 386        {
 387                .name = "overlay1",
 388                .formats = &atmel_hlcdc_plane_rgb_formats,
 389                .regs_offset = 0x160,
 390                .id = 1,
 391                .type = ATMEL_HLCDC_OVERLAY_LAYER,
 392                .cfgs_offset = 0x2c,
 393                .layout = {
 394                        .pos = 2,
 395                        .size = 3,
 396                        .xstride = { 4 },
 397                        .pstride = { 5 },
 398                        .default_color = 6,
 399                        .chroma_key = 7,
 400                        .chroma_key_mask = 8,
 401                        .general_config = 9,
 402                },
 403                .clut_offset = 0xa00,
 404        },
 405        {
 406                .name = "overlay2",
 407                .formats = &atmel_hlcdc_plane_rgb_formats,
 408                .regs_offset = 0x260,
 409                .id = 2,
 410                .type = ATMEL_HLCDC_OVERLAY_LAYER,
 411                .cfgs_offset = 0x2c,
 412                .layout = {
 413                        .pos = 2,
 414                        .size = 3,
 415                        .xstride = { 4 },
 416                        .pstride = { 5 },
 417                        .default_color = 6,
 418                        .chroma_key = 7,
 419                        .chroma_key_mask = 8,
 420                        .general_config = 9,
 421                },
 422                .clut_offset = 0xe00,
 423        },
 424        {
 425                .name = "high-end-overlay",
 426                .formats = &atmel_hlcdc_plane_rgb_and_yuv_formats,
 427                .regs_offset = 0x360,
 428                .id = 3,
 429                .type = ATMEL_HLCDC_OVERLAY_LAYER,
 430                .cfgs_offset = 0x4c,
 431                .layout = {
 432                        .pos = 2,
 433                        .size = 3,
 434                        .memsize = 4,
 435                        .xstride = { 5, 7 },
 436                        .pstride = { 6, 8 },
 437                        .default_color = 9,
 438                        .chroma_key = 10,
 439                        .chroma_key_mask = 11,
 440                        .general_config = 12,
 441                        .scaler_config = 13,
 442                        .phicoeffs = {
 443                                .x = 17,
 444                                .y = 33,
 445                        },
 446                        .csc = 14,
 447                },
 448                .clut_offset = 0x1200,
 449        },
 450};
 451
 452static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sam9x60 = {
 453        .min_width = 0,
 454        .min_height = 0,
 455        .max_width = 2048,
 456        .max_height = 2048,
 457        .max_spw = 0xff,
 458        .max_vpw = 0xff,
 459        .max_hpw = 0x3ff,
 460        .fixed_clksrc = true,
 461        .nlayers = ARRAY_SIZE(atmel_hlcdc_sam9x60_layers),
 462        .layers = atmel_hlcdc_sam9x60_layers,
 463};
 464
 465static const struct of_device_id atmel_hlcdc_of_match[] = {
 466        {
 467                .compatible = "atmel,at91sam9n12-hlcdc",
 468                .data = &atmel_hlcdc_dc_at91sam9n12,
 469        },
 470        {
 471                .compatible = "atmel,at91sam9x5-hlcdc",
 472                .data = &atmel_hlcdc_dc_at91sam9x5,
 473        },
 474        {
 475                .compatible = "atmel,sama5d2-hlcdc",
 476                .data = &atmel_hlcdc_dc_sama5d4,
 477        },
 478        {
 479                .compatible = "atmel,sama5d3-hlcdc",
 480                .data = &atmel_hlcdc_dc_sama5d3,
 481        },
 482        {
 483                .compatible = "atmel,sama5d4-hlcdc",
 484                .data = &atmel_hlcdc_dc_sama5d4,
 485        },
 486        {
 487                .compatible = "microchip,sam9x60-hlcdc",
 488                .data = &atmel_hlcdc_dc_sam9x60,
 489        },
 490        { /* sentinel */ },
 491};
 492MODULE_DEVICE_TABLE(of, atmel_hlcdc_of_match);
 493
 494enum drm_mode_status
 495atmel_hlcdc_dc_mode_valid(struct atmel_hlcdc_dc *dc,
 496                          const struct drm_display_mode *mode)
 497{
 498        int vfront_porch = mode->vsync_start - mode->vdisplay;
 499        int vback_porch = mode->vtotal - mode->vsync_end;
 500        int vsync_len = mode->vsync_end - mode->vsync_start;
 501        int hfront_porch = mode->hsync_start - mode->hdisplay;
 502        int hback_porch = mode->htotal - mode->hsync_end;
 503        int hsync_len = mode->hsync_end - mode->hsync_start;
 504
 505        if (hsync_len > dc->desc->max_spw + 1 || hsync_len < 1)
 506                return MODE_HSYNC;
 507
 508        if (vsync_len > dc->desc->max_spw + 1 || vsync_len < 1)
 509                return MODE_VSYNC;
 510
 511        if (hfront_porch > dc->desc->max_hpw + 1 || hfront_porch < 1 ||
 512            hback_porch > dc->desc->max_hpw + 1 || hback_porch < 1 ||
 513            mode->hdisplay < 1)
 514                return MODE_H_ILLEGAL;
 515
 516        if (vfront_porch > dc->desc->max_vpw + 1 || vfront_porch < 1 ||
 517            vback_porch > dc->desc->max_vpw || vback_porch < 0 ||
 518            mode->vdisplay < 1)
 519                return MODE_V_ILLEGAL;
 520
 521        return MODE_OK;
 522}
 523
 524static void atmel_hlcdc_layer_irq(struct atmel_hlcdc_layer *layer)
 525{
 526        if (!layer)
 527                return;
 528
 529        if (layer->desc->type == ATMEL_HLCDC_BASE_LAYER ||
 530            layer->desc->type == ATMEL_HLCDC_OVERLAY_LAYER ||
 531            layer->desc->type == ATMEL_HLCDC_CURSOR_LAYER)
 532                atmel_hlcdc_plane_irq(atmel_hlcdc_layer_to_plane(layer));
 533}
 534
 535static irqreturn_t atmel_hlcdc_dc_irq_handler(int irq, void *data)
 536{
 537        struct drm_device *dev = data;
 538        struct atmel_hlcdc_dc *dc = dev->dev_private;
 539        unsigned long status;
 540        unsigned int imr, isr;
 541        int i;
 542
 543        regmap_read(dc->hlcdc->regmap, ATMEL_HLCDC_IMR, &imr);
 544        regmap_read(dc->hlcdc->regmap, ATMEL_HLCDC_ISR, &isr);
 545        status = imr & isr;
 546        if (!status)
 547                return IRQ_NONE;
 548
 549        if (status & ATMEL_HLCDC_SOF)
 550                atmel_hlcdc_crtc_irq(dc->crtc);
 551
 552        for (i = 0; i < ATMEL_HLCDC_MAX_LAYERS; i++) {
 553                if (ATMEL_HLCDC_LAYER_STATUS(i) & status)
 554                        atmel_hlcdc_layer_irq(dc->layers[i]);
 555        }
 556
 557        return IRQ_HANDLED;
 558}
 559
 560static const struct drm_mode_config_funcs mode_config_funcs = {
 561        .fb_create = drm_gem_fb_create,
 562        .atomic_check = drm_atomic_helper_check,
 563        .atomic_commit = drm_atomic_helper_commit,
 564};
 565
 566static int atmel_hlcdc_dc_modeset_init(struct drm_device *dev)
 567{
 568        struct atmel_hlcdc_dc *dc = dev->dev_private;
 569        int ret;
 570
 571        drm_mode_config_init(dev);
 572
 573        ret = atmel_hlcdc_create_outputs(dev);
 574        if (ret) {
 575                dev_err(dev->dev, "failed to create HLCDC outputs: %d\n", ret);
 576                return ret;
 577        }
 578
 579        ret = atmel_hlcdc_create_planes(dev);
 580        if (ret) {
 581                dev_err(dev->dev, "failed to create planes: %d\n", ret);
 582                return ret;
 583        }
 584
 585        ret = atmel_hlcdc_crtc_create(dev);
 586        if (ret) {
 587                dev_err(dev->dev, "failed to create crtc\n");
 588                return ret;
 589        }
 590
 591        dev->mode_config.min_width = dc->desc->min_width;
 592        dev->mode_config.min_height = dc->desc->min_height;
 593        dev->mode_config.max_width = dc->desc->max_width;
 594        dev->mode_config.max_height = dc->desc->max_height;
 595        dev->mode_config.funcs = &mode_config_funcs;
 596        dev->mode_config.async_page_flip = true;
 597
 598        return 0;
 599}
 600
 601static int atmel_hlcdc_dc_load(struct drm_device *dev)
 602{
 603        struct platform_device *pdev = to_platform_device(dev->dev);
 604        const struct of_device_id *match;
 605        struct atmel_hlcdc_dc *dc;
 606        int ret;
 607
 608        match = of_match_node(atmel_hlcdc_of_match, dev->dev->parent->of_node);
 609        if (!match) {
 610                dev_err(&pdev->dev, "invalid compatible string\n");
 611                return -ENODEV;
 612        }
 613
 614        if (!match->data) {
 615                dev_err(&pdev->dev, "invalid hlcdc description\n");
 616                return -EINVAL;
 617        }
 618
 619        dc = devm_kzalloc(dev->dev, sizeof(*dc), GFP_KERNEL);
 620        if (!dc)
 621                return -ENOMEM;
 622
 623        dc->desc = match->data;
 624        dc->hlcdc = dev_get_drvdata(dev->dev->parent);
 625        dev->dev_private = dc;
 626
 627        ret = clk_prepare_enable(dc->hlcdc->periph_clk);
 628        if (ret) {
 629                dev_err(dev->dev, "failed to enable periph_clk\n");
 630                return ret;
 631        }
 632
 633        pm_runtime_enable(dev->dev);
 634
 635        ret = drm_vblank_init(dev, 1);
 636        if (ret < 0) {
 637                dev_err(dev->dev, "failed to initialize vblank\n");
 638                goto err_periph_clk_disable;
 639        }
 640
 641        ret = atmel_hlcdc_dc_modeset_init(dev);
 642        if (ret < 0) {
 643                dev_err(dev->dev, "failed to initialize mode setting\n");
 644                goto err_periph_clk_disable;
 645        }
 646
 647        drm_mode_config_reset(dev);
 648
 649        pm_runtime_get_sync(dev->dev);
 650        ret = drm_irq_install(dev, dc->hlcdc->irq);
 651        pm_runtime_put_sync(dev->dev);
 652        if (ret < 0) {
 653                dev_err(dev->dev, "failed to install IRQ handler\n");
 654                goto err_periph_clk_disable;
 655        }
 656
 657        platform_set_drvdata(pdev, dev);
 658
 659        drm_kms_helper_poll_init(dev);
 660
 661        return 0;
 662
 663err_periph_clk_disable:
 664        pm_runtime_disable(dev->dev);
 665        clk_disable_unprepare(dc->hlcdc->periph_clk);
 666
 667        return ret;
 668}
 669
 670static void atmel_hlcdc_dc_unload(struct drm_device *dev)
 671{
 672        struct atmel_hlcdc_dc *dc = dev->dev_private;
 673
 674        drm_kms_helper_poll_fini(dev);
 675        drm_atomic_helper_shutdown(dev);
 676        drm_mode_config_cleanup(dev);
 677
 678        pm_runtime_get_sync(dev->dev);
 679        drm_irq_uninstall(dev);
 680        pm_runtime_put_sync(dev->dev);
 681
 682        dev->dev_private = NULL;
 683
 684        pm_runtime_disable(dev->dev);
 685        clk_disable_unprepare(dc->hlcdc->periph_clk);
 686}
 687
 688static int atmel_hlcdc_dc_irq_postinstall(struct drm_device *dev)
 689{
 690        struct atmel_hlcdc_dc *dc = dev->dev_private;
 691        unsigned int cfg = 0;
 692        int i;
 693
 694        /* Enable interrupts on activated layers */
 695        for (i = 0; i < ATMEL_HLCDC_MAX_LAYERS; i++) {
 696                if (dc->layers[i])
 697                        cfg |= ATMEL_HLCDC_LAYER_STATUS(i);
 698        }
 699
 700        regmap_write(dc->hlcdc->regmap, ATMEL_HLCDC_IER, cfg);
 701
 702        return 0;
 703}
 704
 705static void atmel_hlcdc_dc_irq_uninstall(struct drm_device *dev)
 706{
 707        struct atmel_hlcdc_dc *dc = dev->dev_private;
 708        unsigned int isr;
 709
 710        regmap_write(dc->hlcdc->regmap, ATMEL_HLCDC_IDR, 0xffffffff);
 711        regmap_read(dc->hlcdc->regmap, ATMEL_HLCDC_ISR, &isr);
 712}
 713
 714DEFINE_DRM_GEM_CMA_FOPS(fops);
 715
 716static const struct drm_driver atmel_hlcdc_dc_driver = {
 717        .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
 718        .irq_handler = atmel_hlcdc_dc_irq_handler,
 719        .irq_preinstall = atmel_hlcdc_dc_irq_uninstall,
 720        .irq_postinstall = atmel_hlcdc_dc_irq_postinstall,
 721        .irq_uninstall = atmel_hlcdc_dc_irq_uninstall,
 722        DRM_GEM_CMA_DRIVER_OPS,
 723        .fops = &fops,
 724        .name = "atmel-hlcdc",
 725        .desc = "Atmel HLCD Controller DRM",
 726        .date = "20141504",
 727        .major = 1,
 728        .minor = 0,
 729};
 730
 731static int atmel_hlcdc_dc_drm_probe(struct platform_device *pdev)
 732{
 733        struct drm_device *ddev;
 734        int ret;
 735
 736        ddev = drm_dev_alloc(&atmel_hlcdc_dc_driver, &pdev->dev);
 737        if (IS_ERR(ddev))
 738                return PTR_ERR(ddev);
 739
 740        ret = atmel_hlcdc_dc_load(ddev);
 741        if (ret)
 742                goto err_put;
 743
 744        ret = drm_dev_register(ddev, 0);
 745        if (ret)
 746                goto err_unload;
 747
 748        drm_fbdev_generic_setup(ddev, 24);
 749
 750        return 0;
 751
 752err_unload:
 753        atmel_hlcdc_dc_unload(ddev);
 754
 755err_put:
 756        drm_dev_put(ddev);
 757
 758        return ret;
 759}
 760
 761static int atmel_hlcdc_dc_drm_remove(struct platform_device *pdev)
 762{
 763        struct drm_device *ddev = platform_get_drvdata(pdev);
 764
 765        drm_dev_unregister(ddev);
 766        atmel_hlcdc_dc_unload(ddev);
 767        drm_dev_put(ddev);
 768
 769        return 0;
 770}
 771
 772#ifdef CONFIG_PM_SLEEP
 773static int atmel_hlcdc_dc_drm_suspend(struct device *dev)
 774{
 775        struct drm_device *drm_dev = dev_get_drvdata(dev);
 776        struct atmel_hlcdc_dc *dc = drm_dev->dev_private;
 777        struct regmap *regmap = dc->hlcdc->regmap;
 778        struct drm_atomic_state *state;
 779
 780        state = drm_atomic_helper_suspend(drm_dev);
 781        if (IS_ERR(state))
 782                return PTR_ERR(state);
 783
 784        dc->suspend.state = state;
 785
 786        regmap_read(regmap, ATMEL_HLCDC_IMR, &dc->suspend.imr);
 787        regmap_write(regmap, ATMEL_HLCDC_IDR, dc->suspend.imr);
 788        clk_disable_unprepare(dc->hlcdc->periph_clk);
 789
 790        return 0;
 791}
 792
 793static int atmel_hlcdc_dc_drm_resume(struct device *dev)
 794{
 795        struct drm_device *drm_dev = dev_get_drvdata(dev);
 796        struct atmel_hlcdc_dc *dc = drm_dev->dev_private;
 797
 798        clk_prepare_enable(dc->hlcdc->periph_clk);
 799        regmap_write(dc->hlcdc->regmap, ATMEL_HLCDC_IER, dc->suspend.imr);
 800
 801        return drm_atomic_helper_resume(drm_dev, dc->suspend.state);
 802}
 803#endif
 804
 805static SIMPLE_DEV_PM_OPS(atmel_hlcdc_dc_drm_pm_ops,
 806                atmel_hlcdc_dc_drm_suspend, atmel_hlcdc_dc_drm_resume);
 807
 808static const struct of_device_id atmel_hlcdc_dc_of_match[] = {
 809        { .compatible = "atmel,hlcdc-display-controller" },
 810        { },
 811};
 812
 813static struct platform_driver atmel_hlcdc_dc_platform_driver = {
 814        .probe  = atmel_hlcdc_dc_drm_probe,
 815        .remove = atmel_hlcdc_dc_drm_remove,
 816        .driver = {
 817                .name   = "atmel-hlcdc-display-controller",
 818                .pm     = &atmel_hlcdc_dc_drm_pm_ops,
 819                .of_match_table = atmel_hlcdc_dc_of_match,
 820        },
 821};
 822module_platform_driver(atmel_hlcdc_dc_platform_driver);
 823
 824MODULE_AUTHOR("Jean-Jacques Hiblot <jjhiblot@traphandler.com>");
 825MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
 826MODULE_DESCRIPTION("Atmel HLCDC Display Controller DRM Driver");
 827MODULE_LICENSE("GPL");
 828MODULE_ALIAS("platform:atmel-hlcdc-dc");
 829