linux/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0-only */
   2/*
   3 * Copyright (C) 1999 - 2010 Intel Corporation.
   4 * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
   5 *
   6 * This code was derived from the Intel e1000e Linux driver.
   7 */
   8#ifndef _PCH_GBE_PHY_H_
   9#define _PCH_GBE_PHY_H_
  10
  11#define PCH_GBE_PHY_REGS_LEN            32
  12#define PCH_GBE_PHY_RESET_DELAY_US      10
  13
  14s32 pch_gbe_phy_get_id(struct pch_gbe_hw *hw);
  15s32 pch_gbe_phy_read_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 *data);
  16s32 pch_gbe_phy_write_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 data);
  17void pch_gbe_phy_hw_reset(struct pch_gbe_hw *hw);
  18void pch_gbe_phy_power_up(struct pch_gbe_hw *hw);
  19void pch_gbe_phy_power_down(struct pch_gbe_hw *hw);
  20void pch_gbe_phy_set_rgmii(struct pch_gbe_hw *hw);
  21void pch_gbe_phy_init_setting(struct pch_gbe_hw *hw);
  22int pch_gbe_phy_disable_hibernate(struct pch_gbe_hw *hw);
  23
  24#endif /* _PCH_GBE_PHY_H_ */
  25