LXR linux/drivers/net/wireless/ti/wl12xx/conf.h

   1/* SPDX-License-Identifier: GPL-2.0-only */
   2/*
   3 * This file is part of wl12xx
   4 *
   5 * Copyright (C) 2011 Texas Instruments Inc.
   6 */
   7
   8#ifndef __WL12XX_CONF_H__
   9#define __WL12XX_CONF_H__
  10
  11/* these are number of channels on the band divided by two, rounded up */
  12#define CONF_TX_PWR_COMPENSATION_LEN_2 7
  13#define CONF_TX_PWR_COMPENSATION_LEN_5 18
  14
  15struct wl12xx_conf_rf {
  16        /*
  17         * Per channel power compensation for 2.4GHz
  18         *
  19         * Range: s8
  20         */
  21        u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2];
  22
  23        /*
  24         * Per channel power compensation for 5GHz
  25         *
  26         * Range: s8
  27         */
  28        u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5];
  29};
  30
  31struct wl12xx_priv_conf {
  32        struct wl12xx_conf_rf rf;
  33        struct conf_memory_settings mem_wl127x;
  34};
  35
  36enum wl12xx_sg_params {
  37        /*
  38        * Configure the min and max time BT gains the antenna
  39        * in WLAN / BT master basic rate
  40        *
  41        * Range: 0 - 255 (ms)
  42        */
  43        WL12XX_CONF_SG_ACL_BT_MASTER_MIN_BR = 0,
  44        WL12XX_CONF_SG_ACL_BT_MASTER_MAX_BR,
  45
  46        /*
  47        * Configure the min and max time BT gains the antenna
  48        * in WLAN / BT slave basic rate
  49        *
  50        * Range: 0 - 255 (ms)
  51        */
  52        WL12XX_CONF_SG_ACL_BT_SLAVE_MIN_BR,
  53        WL12XX_CONF_SG_ACL_BT_SLAVE_MAX_BR,
  54
  55        /*
  56        * Configure the min and max time BT gains the antenna
  57        * in WLAN / BT master EDR
  58        *
  59        * Range: 0 - 255 (ms)
  60        */
  61        WL12XX_CONF_SG_ACL_BT_MASTER_MIN_EDR,
  62        WL12XX_CONF_SG_ACL_BT_MASTER_MAX_EDR,
  63
  64        /*
  65        * Configure the min and max time BT gains the antenna
  66        * in WLAN / BT slave EDR
  67        *
  68        * Range: 0 - 255 (ms)
  69        */
  70        WL12XX_CONF_SG_ACL_BT_SLAVE_MIN_EDR,
  71        WL12XX_CONF_SG_ACL_BT_SLAVE_MAX_EDR,
  72
  73        /*
  74        * The maximum time WLAN can gain the antenna
  75        * in WLAN PSM / BT master/slave BR
  76        *
  77        * Range: 0 - 255 (ms)
  78        */
  79        WL12XX_CONF_SG_ACL_WLAN_PS_MASTER_BR,
  80        WL12XX_CONF_SG_ACL_WLAN_PS_SLAVE_BR,
  81
  82        /*
  83        * The maximum time WLAN can gain the antenna
  84        * in WLAN PSM / BT master/slave EDR
  85        *
  86        * Range: 0 - 255 (ms)
  87        */
  88        WL12XX_CONF_SG_ACL_WLAN_PS_MASTER_EDR,
  89        WL12XX_CONF_SG_ACL_WLAN_PS_SLAVE_EDR,
  90
  91        /* TODO: explain these values */
  92        WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR,
  93        WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR,
  94        WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR,
  95        WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR,
  96        WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR,
  97        WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR,
  98        WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR,
  99        WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR,
 100
 101        WL12XX_CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR,
 102        WL12XX_CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR,
 103        WL12XX_CONF_SG_ACL_PASSIVE_SCAN_BT_BR,
 104        WL12XX_CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR,
 105        WL12XX_CONF_SG_ACL_PASSIVE_SCAN_BT_EDR,
 106        WL12XX_CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR,
 107
 108        /*
 109        * Compensation percentage of probe requests when scan initiated
 110        * during BT voice/ACL link.
 111        *
 112        * Range: 0 - 255 (%)
 113        */
 114        WL12XX_CONF_SG_AUTO_SCAN_PROBE_REQ,
 115
 116        /*
 117        * Compensation percentage of probe requests when active scan initiated
 118        * during BT voice
 119        *
 120        * Range: 0 - 255 (%)
 121        */
 122        WL12XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
 123
 124        /*
 125        * Compensation percentage of WLAN active scan window if initiated
 126        * during BT A2DP
 127        *
 128        * Range: 0 - 1000 (%)
 129        */
 130        WL12XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
 131
 132        /*
 133        * Compensation percentage of WLAN passive scan window if initiated
 134        * during BT A2DP BR
 135        *
 136        * Range: 0 - 1000 (%)
 137        */
 138        WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_A2DP_BR,
 139
 140        /*
 141        * Compensation percentage of WLAN passive scan window if initiated
 142        * during BT A2DP EDR
 143        *
 144        * Range: 0 - 1000 (%)
 145        */
 146        WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_A2DP_EDR,
 147
 148        /*
 149        * Compensation percentage of WLAN passive scan window if initiated
 150        * during BT voice
 151        *
 152        * Range: 0 - 1000 (%)
 153        */
 154        WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_HV3,
 155
 156        /* TODO: explain these values */
 157        WL12XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
 158        WL12XX_CONF_SG_BCN_HV3_COLL_THR_IN_PASSIVE_SCAN,
 159        WL12XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN,
 160
 161        /*
 162        * Defines whether the SG will force WLAN host to enter/exit PSM
 163        *
 164        * Range: 1 - SG can force, 0 - host handles PSM
 165        */
 166        WL12XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO,
 167
 168        /*
 169        * Defines antenna configuration (single/dual antenna)
 170        *
 171        * Range: 0 - single antenna, 1 - dual antenna
 172        */
 173        WL12XX_CONF_SG_ANTENNA_CONFIGURATION,
 174
 175        /*
 176        * The threshold (percent) of max consecutive beacon misses before
 177        * increasing priority of beacon reception.
 178        *
 179        * Range: 0 - 100 (%)
 180        */
 181        WL12XX_CONF_SG_BEACON_MISS_PERCENT,
 182
 183        /*
 184        * Protection time of the DHCP procedure.
 185        *
 186        * Range: 0 - 100000 (ms)
 187        */
 188        WL12XX_CONF_SG_DHCP_TIME,
 189
 190        /*
 191        * RX guard time before the beginning of a new BT voice frame during
 192        * which no new WLAN trigger frame is transmitted.
 193        *
 194        * Range: 0 - 100000 (us)
 195        */
 196        WL12XX_CONF_SG_RXT,
 197
 198        /*
 199        * TX guard time before the beginning of a new BT voice frame during
 200        * which no new WLAN frame is transmitted.
 201        *
 202        * Range: 0 - 100000 (us)
 203        */
 204        WL12XX_CONF_SG_TXT,
 205
 206        /*
 207        * Enable adaptive RXT/TXT algorithm. If disabled, the host values
 208        * will be utilized.
 209        *
 210        * Range: 0 - disable, 1 - enable
 211        */
 212        WL12XX_CONF_SG_ADAPTIVE_RXT_TXT,
 213
 214        /* TODO: explain this value */
 215        WL12XX_CONF_SG_GENERAL_USAGE_BIT_MAP,
 216
 217        /*
 218        * Number of consecutive BT voice frames not interrupted by WLAN
 219        *
 220        * Range: 0 - 100
 221        */
 222        WL12XX_CONF_SG_HV3_MAX_SERVED,
 223
 224        /*
 225        * The used WLAN legacy service period during active BT ACL link
 226        *
 227        * Range: 0 - 255 (ms)
 228        */
 229        WL12XX_CONF_SG_PS_POLL_TIMEOUT,
 230
 231        /*
 232        * The used WLAN UPSD service period during active BT ACL link
 233        *
 234        * Range: 0 - 255 (ms)
 235        */
 236        WL12XX_CONF_SG_UPSD_TIMEOUT,
 237
 238        WL12XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
 239        WL12XX_CONF_SG_STA_RX_WINDOW_AFTER_DTIM,
 240        WL12XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME,
 241
 242        /* AP params */
 243        WL12XX_CONF_AP_BEACON_MISS_TX,
 244        WL12XX_CONF_AP_RX_WINDOW_AFTER_BEACON,
 245        WL12XX_CONF_AP_BEACON_WINDOW_INTERVAL,
 246        WL12XX_CONF_AP_CONNECTION_PROTECTION_TIME,
 247        WL12XX_CONF_AP_BT_ACL_VAL_BT_SERVE_TIME,
 248        WL12XX_CONF_AP_BT_ACL_VAL_WL_SERVE_TIME,
 249
 250        /* CTS Diluting params */
 251        WL12XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH,
 252        WL12XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER,
 253
 254        WL12XX_CONF_SG_TEMP_PARAM_1,
 255        WL12XX_CONF_SG_TEMP_PARAM_2,
 256        WL12XX_CONF_SG_TEMP_PARAM_3,
 257        WL12XX_CONF_SG_TEMP_PARAM_4,
 258        WL12XX_CONF_SG_TEMP_PARAM_5,
 259        WL12XX_CONF_SG_TEMP_PARAM_6,
 260        WL12XX_CONF_SG_TEMP_PARAM_7,
 261        WL12XX_CONF_SG_TEMP_PARAM_8,
 262        WL12XX_CONF_SG_TEMP_PARAM_9,
 263        WL12XX_CONF_SG_TEMP_PARAM_10,
 264
 265        WL12XX_CONF_SG_PARAMS_MAX,
 266        WL12XX_CONF_SG_PARAMS_ALL = 0xff
 267};
 268
 269#endif /* __WL12XX_CONF_H__ */
 270