linux/drivers/pci/hotplug/ibmphp_ebda.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0+
   2/*
   3 * IBM Hot Plug Controller Driver
   4 *
   5 * Written By: Tong Yu, IBM Corporation
   6 *
   7 * Copyright (C) 2001,2003 Greg Kroah-Hartman (greg@kroah.com)
   8 * Copyright (C) 2001-2003 IBM Corp.
   9 *
  10 * All rights reserved.
  11 *
  12 * Send feedback to <gregkh@us.ibm.com>
  13 *
  14 */
  15
  16#include <linux/module.h>
  17#include <linux/errno.h>
  18#include <linux/mm.h>
  19#include <linux/slab.h>
  20#include <linux/pci.h>
  21#include <linux/list.h>
  22#include <linux/init.h>
  23#include "ibmphp.h"
  24
  25/*
  26 * POST builds data blocks(in this data block definition, a char-1
  27 * byte, short(or word)-2 byte, long(dword)-4 byte) in the Extended
  28 * BIOS Data Area which describe the configuration of the hot-plug
  29 * controllers and resources used by the PCI Hot-Plug devices.
  30 *
  31 * This file walks EBDA, maps data block from physical addr,
  32 * reconstruct linked lists about all system resource(MEM, PFM, IO)
  33 * already assigned by POST, as well as linked lists about hot plug
  34 * controllers (ctlr#, slot#, bus&slot features...)
  35 */
  36
  37/* Global lists */
  38LIST_HEAD(ibmphp_ebda_pci_rsrc_head);
  39LIST_HEAD(ibmphp_slot_head);
  40
  41/* Local variables */
  42static struct ebda_hpc_list *hpc_list_ptr;
  43static struct ebda_rsrc_list *rsrc_list_ptr;
  44static struct rio_table_hdr *rio_table_ptr = NULL;
  45static LIST_HEAD(ebda_hpc_head);
  46static LIST_HEAD(bus_info_head);
  47static LIST_HEAD(rio_vg_head);
  48static LIST_HEAD(rio_lo_head);
  49static LIST_HEAD(opt_vg_head);
  50static LIST_HEAD(opt_lo_head);
  51static void __iomem *io_mem;
  52
  53/* Local functions */
  54static int ebda_rsrc_controller(void);
  55static int ebda_rsrc_rsrc(void);
  56static int ebda_rio_table(void);
  57
  58static struct ebda_hpc_list * __init alloc_ebda_hpc_list(void)
  59{
  60        return kzalloc(sizeof(struct ebda_hpc_list), GFP_KERNEL);
  61}
  62
  63static struct controller *alloc_ebda_hpc(u32 slot_count, u32 bus_count)
  64{
  65        struct controller *controller;
  66        struct ebda_hpc_slot *slots;
  67        struct ebda_hpc_bus *buses;
  68
  69        controller = kzalloc(sizeof(struct controller), GFP_KERNEL);
  70        if (!controller)
  71                goto error;
  72
  73        slots = kcalloc(slot_count, sizeof(struct ebda_hpc_slot), GFP_KERNEL);
  74        if (!slots)
  75                goto error_contr;
  76        controller->slots = slots;
  77
  78        buses = kcalloc(bus_count, sizeof(struct ebda_hpc_bus), GFP_KERNEL);
  79        if (!buses)
  80                goto error_slots;
  81        controller->buses = buses;
  82
  83        return controller;
  84error_slots:
  85        kfree(controller->slots);
  86error_contr:
  87        kfree(controller);
  88error:
  89        return NULL;
  90}
  91
  92static void free_ebda_hpc(struct controller *controller)
  93{
  94        kfree(controller->slots);
  95        kfree(controller->buses);
  96        kfree(controller);
  97}
  98
  99static struct ebda_rsrc_list * __init alloc_ebda_rsrc_list(void)
 100{
 101        return kzalloc(sizeof(struct ebda_rsrc_list), GFP_KERNEL);
 102}
 103
 104static struct ebda_pci_rsrc *alloc_ebda_pci_rsrc(void)
 105{
 106        return kzalloc(sizeof(struct ebda_pci_rsrc), GFP_KERNEL);
 107}
 108
 109static void __init print_bus_info(void)
 110{
 111        struct bus_info *ptr;
 112
 113        list_for_each_entry(ptr, &bus_info_head, bus_info_list) {
 114                debug("%s - slot_min = %x\n", __func__, ptr->slot_min);
 115                debug("%s - slot_max = %x\n", __func__, ptr->slot_max);
 116                debug("%s - slot_count = %x\n", __func__, ptr->slot_count);
 117                debug("%s - bus# = %x\n", __func__, ptr->busno);
 118                debug("%s - current_speed = %x\n", __func__, ptr->current_speed);
 119                debug("%s - controller_id = %x\n", __func__, ptr->controller_id);
 120
 121                debug("%s - slots_at_33_conv = %x\n", __func__, ptr->slots_at_33_conv);
 122                debug("%s - slots_at_66_conv = %x\n", __func__, ptr->slots_at_66_conv);
 123                debug("%s - slots_at_66_pcix = %x\n", __func__, ptr->slots_at_66_pcix);
 124                debug("%s - slots_at_100_pcix = %x\n", __func__, ptr->slots_at_100_pcix);
 125                debug("%s - slots_at_133_pcix = %x\n", __func__, ptr->slots_at_133_pcix);
 126
 127        }
 128}
 129
 130static void print_lo_info(void)
 131{
 132        struct rio_detail *ptr;
 133        debug("print_lo_info ----\n");
 134        list_for_each_entry(ptr, &rio_lo_head, rio_detail_list) {
 135                debug("%s - rio_node_id = %x\n", __func__, ptr->rio_node_id);
 136                debug("%s - rio_type = %x\n", __func__, ptr->rio_type);
 137                debug("%s - owner_id = %x\n", __func__, ptr->owner_id);
 138                debug("%s - first_slot_num = %x\n", __func__, ptr->first_slot_num);
 139                debug("%s - wpindex = %x\n", __func__, ptr->wpindex);
 140                debug("%s - chassis_num = %x\n", __func__, ptr->chassis_num);
 141
 142        }
 143}
 144
 145static void print_vg_info(void)
 146{
 147        struct rio_detail *ptr;
 148        debug("%s ---\n", __func__);
 149        list_for_each_entry(ptr, &rio_vg_head, rio_detail_list) {
 150                debug("%s - rio_node_id = %x\n", __func__, ptr->rio_node_id);
 151                debug("%s - rio_type = %x\n", __func__, ptr->rio_type);
 152                debug("%s - owner_id = %x\n", __func__, ptr->owner_id);
 153                debug("%s - first_slot_num = %x\n", __func__, ptr->first_slot_num);
 154                debug("%s - wpindex = %x\n", __func__, ptr->wpindex);
 155                debug("%s - chassis_num = %x\n", __func__, ptr->chassis_num);
 156
 157        }
 158}
 159
 160static void __init print_ebda_pci_rsrc(void)
 161{
 162        struct ebda_pci_rsrc *ptr;
 163
 164        list_for_each_entry(ptr, &ibmphp_ebda_pci_rsrc_head, ebda_pci_rsrc_list) {
 165                debug("%s - rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
 166                        __func__, ptr->rsrc_type, ptr->bus_num, ptr->dev_fun, ptr->start_addr, ptr->end_addr);
 167        }
 168}
 169
 170static void __init print_ibm_slot(void)
 171{
 172        struct slot *ptr;
 173
 174        list_for_each_entry(ptr, &ibmphp_slot_head, ibm_slot_list) {
 175                debug("%s - slot_number: %x\n", __func__, ptr->number);
 176        }
 177}
 178
 179static void __init print_opt_vg(void)
 180{
 181        struct opt_rio *ptr;
 182        debug("%s ---\n", __func__);
 183        list_for_each_entry(ptr, &opt_vg_head, opt_rio_list) {
 184                debug("%s - rio_type %x\n", __func__, ptr->rio_type);
 185                debug("%s - chassis_num: %x\n", __func__, ptr->chassis_num);
 186                debug("%s - first_slot_num: %x\n", __func__, ptr->first_slot_num);
 187                debug("%s - middle_num: %x\n", __func__, ptr->middle_num);
 188        }
 189}
 190
 191static void __init print_ebda_hpc(void)
 192{
 193        struct controller *hpc_ptr;
 194        u16 index;
 195
 196        list_for_each_entry(hpc_ptr, &ebda_hpc_head, ebda_hpc_list) {
 197                for (index = 0; index < hpc_ptr->slot_count; index++) {
 198                        debug("%s - physical slot#: %x\n", __func__, hpc_ptr->slots[index].slot_num);
 199                        debug("%s - pci bus# of the slot: %x\n", __func__, hpc_ptr->slots[index].slot_bus_num);
 200                        debug("%s - index into ctlr addr: %x\n", __func__, hpc_ptr->slots[index].ctl_index);
 201                        debug("%s - cap of the slot: %x\n", __func__, hpc_ptr->slots[index].slot_cap);
 202                }
 203
 204                for (index = 0; index < hpc_ptr->bus_count; index++)
 205                        debug("%s - bus# of each bus controlled by this ctlr: %x\n", __func__, hpc_ptr->buses[index].bus_num);
 206
 207                debug("%s - type of hpc: %x\n", __func__, hpc_ptr->ctlr_type);
 208                switch (hpc_ptr->ctlr_type) {
 209                case 1:
 210                        debug("%s - bus: %x\n", __func__, hpc_ptr->u.pci_ctlr.bus);
 211                        debug("%s - dev_fun: %x\n", __func__, hpc_ptr->u.pci_ctlr.dev_fun);
 212                        debug("%s - irq: %x\n", __func__, hpc_ptr->irq);
 213                        break;
 214
 215                case 0:
 216                        debug("%s - io_start: %x\n", __func__, hpc_ptr->u.isa_ctlr.io_start);
 217                        debug("%s - io_end: %x\n", __func__, hpc_ptr->u.isa_ctlr.io_end);
 218                        debug("%s - irq: %x\n", __func__, hpc_ptr->irq);
 219                        break;
 220
 221                case 2:
 222                case 4:
 223                        debug("%s - wpegbbar: %lx\n", __func__, hpc_ptr->u.wpeg_ctlr.wpegbbar);
 224                        debug("%s - i2c_addr: %x\n", __func__, hpc_ptr->u.wpeg_ctlr.i2c_addr);
 225                        debug("%s - irq: %x\n", __func__, hpc_ptr->irq);
 226                        break;
 227                }
 228        }
 229}
 230
 231int __init ibmphp_access_ebda(void)
 232{
 233        u8 format, num_ctlrs, rio_complete, hs_complete, ebda_sz;
 234        u16 ebda_seg, num_entries, next_offset, offset, blk_id, sub_addr, re, rc_id, re_id, base;
 235        int rc = 0;
 236
 237
 238        rio_complete = 0;
 239        hs_complete = 0;
 240
 241        io_mem = ioremap((0x40 << 4) + 0x0e, 2);
 242        if (!io_mem)
 243                return -ENOMEM;
 244        ebda_seg = readw(io_mem);
 245        iounmap(io_mem);
 246        debug("returned ebda segment: %x\n", ebda_seg);
 247
 248        io_mem = ioremap(ebda_seg<<4, 1);
 249        if (!io_mem)
 250                return -ENOMEM;
 251        ebda_sz = readb(io_mem);
 252        iounmap(io_mem);
 253        debug("ebda size: %d(KiB)\n", ebda_sz);
 254        if (ebda_sz == 0)
 255                return -ENOMEM;
 256
 257        io_mem = ioremap(ebda_seg<<4, (ebda_sz * 1024));
 258        if (!io_mem)
 259                return -ENOMEM;
 260        next_offset = 0x180;
 261
 262        for (;;) {
 263                offset = next_offset;
 264
 265                /* Make sure what we read is still in the mapped section */
 266                if (WARN(offset > (ebda_sz * 1024 - 4),
 267                         "ibmphp_ebda: next read is beyond ebda_sz\n"))
 268                        break;
 269
 270                next_offset = readw(io_mem + offset);   /* offset of next blk */
 271
 272                offset += 2;
 273                if (next_offset == 0)   /* 0 indicate it's last blk */
 274                        break;
 275                blk_id = readw(io_mem + offset);        /* this blk id */
 276
 277                offset += 2;
 278                /* check if it is hot swap block or rio block */
 279                if (blk_id != 0x4853 && blk_id != 0x4752)
 280                        continue;
 281                /* found hs table */
 282                if (blk_id == 0x4853) {
 283                        debug("now enter hot swap block---\n");
 284                        debug("hot blk id: %x\n", blk_id);
 285                        format = readb(io_mem + offset);
 286
 287                        offset += 1;
 288                        if (format != 4)
 289                                goto error_nodev;
 290                        debug("hot blk format: %x\n", format);
 291                        /* hot swap sub blk */
 292                        base = offset;
 293
 294                        sub_addr = base;
 295                        re = readw(io_mem + sub_addr);  /* next sub blk */
 296
 297                        sub_addr += 2;
 298                        rc_id = readw(io_mem + sub_addr);       /* sub blk id */
 299
 300                        sub_addr += 2;
 301                        if (rc_id != 0x5243)
 302                                goto error_nodev;
 303                        /* rc sub blk signature  */
 304                        num_ctlrs = readb(io_mem + sub_addr);
 305
 306                        sub_addr += 1;
 307                        hpc_list_ptr = alloc_ebda_hpc_list();
 308                        if (!hpc_list_ptr) {
 309                                rc = -ENOMEM;
 310                                goto out;
 311                        }
 312                        hpc_list_ptr->format = format;
 313                        hpc_list_ptr->num_ctlrs = num_ctlrs;
 314                        hpc_list_ptr->phys_addr = sub_addr;     /*  offset of RSRC_CONTROLLER blk */
 315                        debug("info about hpc descriptor---\n");
 316                        debug("hot blk format: %x\n", format);
 317                        debug("num of controller: %x\n", num_ctlrs);
 318                        debug("offset of hpc data structure entries: %x\n ", sub_addr);
 319
 320                        sub_addr = base + re;   /* re sub blk */
 321                        /* FIXME: rc is never used/checked */
 322                        rc = readw(io_mem + sub_addr);  /* next sub blk */
 323
 324                        sub_addr += 2;
 325                        re_id = readw(io_mem + sub_addr);       /* sub blk id */
 326
 327                        sub_addr += 2;
 328                        if (re_id != 0x5245)
 329                                goto error_nodev;
 330
 331                        /* signature of re */
 332                        num_entries = readw(io_mem + sub_addr);
 333
 334                        sub_addr += 2;  /* offset of RSRC_ENTRIES blk */
 335                        rsrc_list_ptr = alloc_ebda_rsrc_list();
 336                        if (!rsrc_list_ptr) {
 337                                rc = -ENOMEM;
 338                                goto out;
 339                        }
 340                        rsrc_list_ptr->format = format;
 341                        rsrc_list_ptr->num_entries = num_entries;
 342                        rsrc_list_ptr->phys_addr = sub_addr;
 343
 344                        debug("info about rsrc descriptor---\n");
 345                        debug("format: %x\n", format);
 346                        debug("num of rsrc: %x\n", num_entries);
 347                        debug("offset of rsrc data structure entries: %x\n ", sub_addr);
 348
 349                        hs_complete = 1;
 350                } else {
 351                /* found rio table, blk_id == 0x4752 */
 352                        debug("now enter io table ---\n");
 353                        debug("rio blk id: %x\n", blk_id);
 354
 355                        rio_table_ptr = kzalloc(sizeof(struct rio_table_hdr), GFP_KERNEL);
 356                        if (!rio_table_ptr) {
 357                                rc = -ENOMEM;
 358                                goto out;
 359                        }
 360                        rio_table_ptr->ver_num = readb(io_mem + offset);
 361                        rio_table_ptr->scal_count = readb(io_mem + offset + 1);
 362                        rio_table_ptr->riodev_count = readb(io_mem + offset + 2);
 363                        rio_table_ptr->offset = offset + 3 ;
 364
 365                        debug("info about rio table hdr ---\n");
 366                        debug("ver_num: %x\nscal_count: %x\nriodev_count: %x\noffset of rio table: %x\n ",
 367                                rio_table_ptr->ver_num, rio_table_ptr->scal_count,
 368                                rio_table_ptr->riodev_count, rio_table_ptr->offset);
 369
 370                        rio_complete = 1;
 371                }
 372        }
 373
 374        if (!hs_complete && !rio_complete)
 375                goto error_nodev;
 376
 377        if (rio_table_ptr) {
 378                if (rio_complete && rio_table_ptr->ver_num == 3) {
 379                        rc = ebda_rio_table();
 380                        if (rc)
 381                                goto out;
 382                }
 383        }
 384        rc = ebda_rsrc_controller();
 385        if (rc)
 386                goto out;
 387
 388        rc = ebda_rsrc_rsrc();
 389        goto out;
 390error_nodev:
 391        rc = -ENODEV;
 392out:
 393        iounmap(io_mem);
 394        return rc;
 395}
 396
 397/*
 398 * map info of scalability details and rio details from physical address
 399 */
 400static int __init ebda_rio_table(void)
 401{
 402        u16 offset;
 403        u8 i;
 404        struct rio_detail *rio_detail_ptr;
 405
 406        offset = rio_table_ptr->offset;
 407        offset += 12 * rio_table_ptr->scal_count;
 408
 409        // we do concern about rio details
 410        for (i = 0; i < rio_table_ptr->riodev_count; i++) {
 411                rio_detail_ptr = kzalloc(sizeof(struct rio_detail), GFP_KERNEL);
 412                if (!rio_detail_ptr)
 413                        return -ENOMEM;
 414                rio_detail_ptr->rio_node_id = readb(io_mem + offset);
 415                rio_detail_ptr->bbar = readl(io_mem + offset + 1);
 416                rio_detail_ptr->rio_type = readb(io_mem + offset + 5);
 417                rio_detail_ptr->owner_id = readb(io_mem + offset + 6);
 418                rio_detail_ptr->port0_node_connect = readb(io_mem + offset + 7);
 419                rio_detail_ptr->port0_port_connect = readb(io_mem + offset + 8);
 420                rio_detail_ptr->port1_node_connect = readb(io_mem + offset + 9);
 421                rio_detail_ptr->port1_port_connect = readb(io_mem + offset + 10);
 422                rio_detail_ptr->first_slot_num = readb(io_mem + offset + 11);
 423                rio_detail_ptr->status = readb(io_mem + offset + 12);
 424                rio_detail_ptr->wpindex = readb(io_mem + offset + 13);
 425                rio_detail_ptr->chassis_num = readb(io_mem + offset + 14);
 426//              debug("rio_node_id: %x\nbbar: %x\nrio_type: %x\nowner_id: %x\nport0_node: %x\nport0_port: %x\nport1_node: %x\nport1_port: %x\nfirst_slot_num: %x\nstatus: %x\n", rio_detail_ptr->rio_node_id, rio_detail_ptr->bbar, rio_detail_ptr->rio_type, rio_detail_ptr->owner_id, rio_detail_ptr->port0_node_connect, rio_detail_ptr->port0_port_connect, rio_detail_ptr->port1_node_connect, rio_detail_ptr->port1_port_connect, rio_detail_ptr->first_slot_num, rio_detail_ptr->status);
 427                //create linked list of chassis
 428                if (rio_detail_ptr->rio_type == 4 || rio_detail_ptr->rio_type == 5)
 429                        list_add(&rio_detail_ptr->rio_detail_list, &rio_vg_head);
 430                //create linked list of expansion box
 431                else if (rio_detail_ptr->rio_type == 6 || rio_detail_ptr->rio_type == 7)
 432                        list_add(&rio_detail_ptr->rio_detail_list, &rio_lo_head);
 433                else
 434                        // not in my concern
 435                        kfree(rio_detail_ptr);
 436                offset += 15;
 437        }
 438        print_lo_info();
 439        print_vg_info();
 440        return 0;
 441}
 442
 443/*
 444 * reorganizing linked list of chassis
 445 */
 446static struct opt_rio *search_opt_vg(u8 chassis_num)
 447{
 448        struct opt_rio *ptr;
 449        list_for_each_entry(ptr, &opt_vg_head, opt_rio_list) {
 450                if (ptr->chassis_num == chassis_num)
 451                        return ptr;
 452        }
 453        return NULL;
 454}
 455
 456static int __init combine_wpg_for_chassis(void)
 457{
 458        struct opt_rio *opt_rio_ptr = NULL;
 459        struct rio_detail *rio_detail_ptr = NULL;
 460
 461        list_for_each_entry(rio_detail_ptr, &rio_vg_head, rio_detail_list) {
 462                opt_rio_ptr = search_opt_vg(rio_detail_ptr->chassis_num);
 463                if (!opt_rio_ptr) {
 464                        opt_rio_ptr = kzalloc(sizeof(struct opt_rio), GFP_KERNEL);
 465                        if (!opt_rio_ptr)
 466                                return -ENOMEM;
 467                        opt_rio_ptr->rio_type = rio_detail_ptr->rio_type;
 468                        opt_rio_ptr->chassis_num = rio_detail_ptr->chassis_num;
 469                        opt_rio_ptr->first_slot_num = rio_detail_ptr->first_slot_num;
 470                        opt_rio_ptr->middle_num = rio_detail_ptr->first_slot_num;
 471                        list_add(&opt_rio_ptr->opt_rio_list, &opt_vg_head);
 472                } else {
 473                        opt_rio_ptr->first_slot_num = min(opt_rio_ptr->first_slot_num, rio_detail_ptr->first_slot_num);
 474                        opt_rio_ptr->middle_num = max(opt_rio_ptr->middle_num, rio_detail_ptr->first_slot_num);
 475                }
 476        }
 477        print_opt_vg();
 478        return 0;
 479}
 480
 481/*
 482 * reorganizing linked list of expansion box
 483 */
 484static struct opt_rio_lo *search_opt_lo(u8 chassis_num)
 485{
 486        struct opt_rio_lo *ptr;
 487        list_for_each_entry(ptr, &opt_lo_head, opt_rio_lo_list) {
 488                if (ptr->chassis_num == chassis_num)
 489                        return ptr;
 490        }
 491        return NULL;
 492}
 493
 494static int combine_wpg_for_expansion(void)
 495{
 496        struct opt_rio_lo *opt_rio_lo_ptr = NULL;
 497        struct rio_detail *rio_detail_ptr = NULL;
 498
 499        list_for_each_entry(rio_detail_ptr, &rio_lo_head, rio_detail_list) {
 500                opt_rio_lo_ptr = search_opt_lo(rio_detail_ptr->chassis_num);
 501                if (!opt_rio_lo_ptr) {
 502                        opt_rio_lo_ptr = kzalloc(sizeof(struct opt_rio_lo), GFP_KERNEL);
 503                        if (!opt_rio_lo_ptr)
 504                                return -ENOMEM;
 505                        opt_rio_lo_ptr->rio_type = rio_detail_ptr->rio_type;
 506                        opt_rio_lo_ptr->chassis_num = rio_detail_ptr->chassis_num;
 507                        opt_rio_lo_ptr->first_slot_num = rio_detail_ptr->first_slot_num;
 508                        opt_rio_lo_ptr->middle_num = rio_detail_ptr->first_slot_num;
 509                        opt_rio_lo_ptr->pack_count = 1;
 510
 511                        list_add(&opt_rio_lo_ptr->opt_rio_lo_list, &opt_lo_head);
 512                } else {
 513                        opt_rio_lo_ptr->first_slot_num = min(opt_rio_lo_ptr->first_slot_num, rio_detail_ptr->first_slot_num);
 514                        opt_rio_lo_ptr->middle_num = max(opt_rio_lo_ptr->middle_num, rio_detail_ptr->first_slot_num);
 515                        opt_rio_lo_ptr->pack_count = 2;
 516                }
 517        }
 518        return 0;
 519}
 520
 521
 522/* Since we don't know the max slot number per each chassis, hence go
 523 * through the list of all chassis to find out the range
 524 * Arguments: slot_num, 1st slot number of the chassis we think we are on,
 525 * var (0 = chassis, 1 = expansion box)
 526 */
 527static int first_slot_num(u8 slot_num, u8 first_slot, u8 var)
 528{
 529        struct opt_rio *opt_vg_ptr = NULL;
 530        struct opt_rio_lo *opt_lo_ptr = NULL;
 531        int rc = 0;
 532
 533        if (!var) {
 534                list_for_each_entry(opt_vg_ptr, &opt_vg_head, opt_rio_list) {
 535                        if ((first_slot < opt_vg_ptr->first_slot_num) && (slot_num >= opt_vg_ptr->first_slot_num)) {
 536                                rc = -ENODEV;
 537                                break;
 538                        }
 539                }
 540        } else {
 541                list_for_each_entry(opt_lo_ptr, &opt_lo_head, opt_rio_lo_list) {
 542                        if ((first_slot < opt_lo_ptr->first_slot_num) && (slot_num >= opt_lo_ptr->first_slot_num)) {
 543                                rc = -ENODEV;
 544                                break;
 545                        }
 546                }
 547        }
 548        return rc;
 549}
 550
 551static struct opt_rio_lo *find_rxe_num(u8 slot_num)
 552{
 553        struct opt_rio_lo *opt_lo_ptr;
 554
 555        list_for_each_entry(opt_lo_ptr, &opt_lo_head, opt_rio_lo_list) {
 556                //check to see if this slot_num belongs to expansion box
 557                if ((slot_num >= opt_lo_ptr->first_slot_num) && (!first_slot_num(slot_num, opt_lo_ptr->first_slot_num, 1)))
 558                        return opt_lo_ptr;
 559        }
 560        return NULL;
 561}
 562
 563static struct opt_rio *find_chassis_num(u8 slot_num)
 564{
 565        struct opt_rio *opt_vg_ptr;
 566
 567        list_for_each_entry(opt_vg_ptr, &opt_vg_head, opt_rio_list) {
 568                //check to see if this slot_num belongs to chassis
 569                if ((slot_num >= opt_vg_ptr->first_slot_num) && (!first_slot_num(slot_num, opt_vg_ptr->first_slot_num, 0)))
 570                        return opt_vg_ptr;
 571        }
 572        return NULL;
 573}
 574
 575/* This routine will find out how many slots are in the chassis, so that
 576 * the slot numbers for rxe100 would start from 1, and not from 7, or 6 etc
 577 */
 578static u8 calculate_first_slot(u8 slot_num)
 579{
 580        u8 first_slot = 1;
 581        struct slot *slot_cur;
 582
 583        list_for_each_entry(slot_cur, &ibmphp_slot_head, ibm_slot_list) {
 584                if (slot_cur->ctrl) {
 585                        if ((slot_cur->ctrl->ctlr_type != 4) && (slot_cur->ctrl->ending_slot_num > first_slot) && (slot_num > slot_cur->ctrl->ending_slot_num))
 586                                first_slot = slot_cur->ctrl->ending_slot_num;
 587                }
 588        }
 589        return first_slot + 1;
 590
 591}
 592
 593#define SLOT_NAME_SIZE 30
 594
 595static char *create_file_name(struct slot *slot_cur)
 596{
 597        struct opt_rio *opt_vg_ptr = NULL;
 598        struct opt_rio_lo *opt_lo_ptr = NULL;
 599        static char str[SLOT_NAME_SIZE];
 600        int which = 0; /* rxe = 1, chassis = 0 */
 601        u8 number = 1; /* either chassis or rxe # */
 602        u8 first_slot = 1;
 603        u8 slot_num;
 604        u8 flag = 0;
 605
 606        if (!slot_cur) {
 607                err("Structure passed is empty\n");
 608                return NULL;
 609        }
 610
 611        slot_num = slot_cur->number;
 612
 613        memset(str, 0, sizeof(str));
 614
 615        if (rio_table_ptr) {
 616                if (rio_table_ptr->ver_num == 3) {
 617                        opt_vg_ptr = find_chassis_num(slot_num);
 618                        opt_lo_ptr = find_rxe_num(slot_num);
 619                }
 620        }
 621        if (opt_vg_ptr) {
 622                if (opt_lo_ptr) {
 623                        if ((slot_num - opt_vg_ptr->first_slot_num) > (slot_num - opt_lo_ptr->first_slot_num)) {
 624                                number = opt_lo_ptr->chassis_num;
 625                                first_slot = opt_lo_ptr->first_slot_num;
 626                                which = 1; /* it is RXE */
 627                        } else {
 628                                first_slot = opt_vg_ptr->first_slot_num;
 629                                number = opt_vg_ptr->chassis_num;
 630                                which = 0;
 631                        }
 632                } else {
 633                        first_slot = opt_vg_ptr->first_slot_num;
 634                        number = opt_vg_ptr->chassis_num;
 635                        which = 0;
 636                }
 637                ++flag;
 638        } else if (opt_lo_ptr) {
 639                number = opt_lo_ptr->chassis_num;
 640                first_slot = opt_lo_ptr->first_slot_num;
 641                which = 1;
 642                ++flag;
 643        } else if (rio_table_ptr) {
 644                if (rio_table_ptr->ver_num == 3) {
 645                        /* if both NULL and we DO have correct RIO table in BIOS */
 646                        return NULL;
 647                }
 648        }
 649        if (!flag) {
 650                if (slot_cur->ctrl->ctlr_type == 4) {
 651                        first_slot = calculate_first_slot(slot_num);
 652                        which = 1;
 653                } else {
 654                        which = 0;
 655                }
 656        }
 657
 658        sprintf(str, "%s%dslot%d",
 659                which == 0 ? "chassis" : "rxe",
 660                number, slot_num - first_slot + 1);
 661        return str;
 662}
 663
 664static int fillslotinfo(struct hotplug_slot *hotplug_slot)
 665{
 666        struct slot *slot;
 667        int rc = 0;
 668
 669        slot = to_slot(hotplug_slot);
 670        rc = ibmphp_hpc_readslot(slot, READ_ALLSTAT, NULL);
 671        return rc;
 672}
 673
 674static struct pci_driver ibmphp_driver;
 675
 676/*
 677 * map info (ctlr-id, slot count, slot#.. bus count, bus#, ctlr type...) of
 678 * each hpc from physical address to a list of hot plug controllers based on
 679 * hpc descriptors.
 680 */
 681static int __init ebda_rsrc_controller(void)
 682{
 683        u16 addr, addr_slot, addr_bus;
 684        u8 ctlr_id, temp, bus_index;
 685        u16 ctlr, slot, bus;
 686        u16 slot_num, bus_num, index;
 687        struct controller *hpc_ptr;
 688        struct ebda_hpc_bus *bus_ptr;
 689        struct ebda_hpc_slot *slot_ptr;
 690        struct bus_info *bus_info_ptr1, *bus_info_ptr2;
 691        int rc;
 692        struct slot *tmp_slot;
 693        char name[SLOT_NAME_SIZE];
 694
 695        addr = hpc_list_ptr->phys_addr;
 696        for (ctlr = 0; ctlr < hpc_list_ptr->num_ctlrs; ctlr++) {
 697                bus_index = 1;
 698                ctlr_id = readb(io_mem + addr);
 699                addr += 1;
 700                slot_num = readb(io_mem + addr);
 701
 702                addr += 1;
 703                addr_slot = addr;       /* offset of slot structure */
 704                addr += (slot_num * 4);
 705
 706                bus_num = readb(io_mem + addr);
 707
 708                addr += 1;
 709                addr_bus = addr;        /* offset of bus */
 710                addr += (bus_num * 9);  /* offset of ctlr_type */
 711                temp = readb(io_mem + addr);
 712
 713                addr += 1;
 714                /* init hpc structure */
 715                hpc_ptr = alloc_ebda_hpc(slot_num, bus_num);
 716                if (!hpc_ptr) {
 717                        rc = -ENOMEM;
 718                        goto error_no_hpc;
 719                }
 720                hpc_ptr->ctlr_id = ctlr_id;
 721                hpc_ptr->ctlr_relative_id = ctlr;
 722                hpc_ptr->slot_count = slot_num;
 723                hpc_ptr->bus_count = bus_num;
 724                debug("now enter ctlr data structure ---\n");
 725                debug("ctlr id: %x\n", ctlr_id);
 726                debug("ctlr_relative_id: %x\n", hpc_ptr->ctlr_relative_id);
 727                debug("count of slots controlled by this ctlr: %x\n", slot_num);
 728                debug("count of buses controlled by this ctlr: %x\n", bus_num);
 729
 730                /* init slot structure, fetch slot, bus, cap... */
 731                slot_ptr = hpc_ptr->slots;
 732                for (slot = 0; slot < slot_num; slot++) {
 733                        slot_ptr->slot_num = readb(io_mem + addr_slot);
 734                        slot_ptr->slot_bus_num = readb(io_mem + addr_slot + slot_num);
 735                        slot_ptr->ctl_index = readb(io_mem + addr_slot + 2*slot_num);
 736                        slot_ptr->slot_cap = readb(io_mem + addr_slot + 3*slot_num);
 737
 738                        // create bus_info lined list --- if only one slot per bus: slot_min = slot_max
 739
 740                        bus_info_ptr2 = ibmphp_find_same_bus_num(slot_ptr->slot_bus_num);
 741                        if (!bus_info_ptr2) {
 742                                bus_info_ptr1 = kzalloc(sizeof(struct bus_info), GFP_KERNEL);
 743                                if (!bus_info_ptr1) {
 744                                        rc = -ENOMEM;
 745                                        goto error_no_slot;
 746                                }
 747                                bus_info_ptr1->slot_min = slot_ptr->slot_num;
 748                                bus_info_ptr1->slot_max = slot_ptr->slot_num;
 749                                bus_info_ptr1->slot_count += 1;
 750                                bus_info_ptr1->busno = slot_ptr->slot_bus_num;
 751                                bus_info_ptr1->index = bus_index++;
 752                                bus_info_ptr1->current_speed = 0xff;
 753                                bus_info_ptr1->current_bus_mode = 0xff;
 754
 755                                bus_info_ptr1->controller_id = hpc_ptr->ctlr_id;
 756
 757                                list_add_tail(&bus_info_ptr1->bus_info_list, &bus_info_head);
 758
 759                        } else {
 760                                bus_info_ptr2->slot_min = min(bus_info_ptr2->slot_min, slot_ptr->slot_num);
 761                                bus_info_ptr2->slot_max = max(bus_info_ptr2->slot_max, slot_ptr->slot_num);
 762                                bus_info_ptr2->slot_count += 1;
 763
 764                        }
 765
 766                        // end of creating the bus_info linked list
 767
 768                        slot_ptr++;
 769                        addr_slot += 1;
 770                }
 771
 772                /* init bus structure */
 773                bus_ptr = hpc_ptr->buses;
 774                for (bus = 0; bus < bus_num; bus++) {
 775                        bus_ptr->bus_num = readb(io_mem + addr_bus + bus);
 776                        bus_ptr->slots_at_33_conv = readb(io_mem + addr_bus + bus_num + 8 * bus);
 777                        bus_ptr->slots_at_66_conv = readb(io_mem + addr_bus + bus_num + 8 * bus + 1);
 778
 779                        bus_ptr->slots_at_66_pcix = readb(io_mem + addr_bus + bus_num + 8 * bus + 2);
 780
 781                        bus_ptr->slots_at_100_pcix = readb(io_mem + addr_bus + bus_num + 8 * bus + 3);
 782
 783                        bus_ptr->slots_at_133_pcix = readb(io_mem + addr_bus + bus_num + 8 * bus + 4);
 784
 785                        bus_info_ptr2 = ibmphp_find_same_bus_num(bus_ptr->bus_num);
 786                        if (bus_info_ptr2) {
 787                                bus_info_ptr2->slots_at_33_conv = bus_ptr->slots_at_33_conv;
 788                                bus_info_ptr2->slots_at_66_conv = bus_ptr->slots_at_66_conv;
 789                                bus_info_ptr2->slots_at_66_pcix = bus_ptr->slots_at_66_pcix;
 790                                bus_info_ptr2->slots_at_100_pcix = bus_ptr->slots_at_100_pcix;
 791                                bus_info_ptr2->slots_at_133_pcix = bus_ptr->slots_at_133_pcix;
 792                        }
 793                        bus_ptr++;
 794                }
 795
 796                hpc_ptr->ctlr_type = temp;
 797
 798                switch (hpc_ptr->ctlr_type) {
 799                        case 1:
 800                                hpc_ptr->u.pci_ctlr.bus = readb(io_mem + addr);
 801                                hpc_ptr->u.pci_ctlr.dev_fun = readb(io_mem + addr + 1);
 802                                hpc_ptr->irq = readb(io_mem + addr + 2);
 803                                addr += 3;
 804                                debug("ctrl bus = %x, ctlr devfun = %x, irq = %x\n",
 805                                        hpc_ptr->u.pci_ctlr.bus,
 806                                        hpc_ptr->u.pci_ctlr.dev_fun, hpc_ptr->irq);
 807                                break;
 808
 809                        case 0:
 810                                hpc_ptr->u.isa_ctlr.io_start = readw(io_mem + addr);
 811                                hpc_ptr->u.isa_ctlr.io_end = readw(io_mem + addr + 2);
 812                                if (!request_region(hpc_ptr->u.isa_ctlr.io_start,
 813                                                     (hpc_ptr->u.isa_ctlr.io_end - hpc_ptr->u.isa_ctlr.io_start + 1),
 814                                                     "ibmphp")) {
 815                                        rc = -ENODEV;
 816                                        goto error_no_slot;
 817                                }
 818                                hpc_ptr->irq = readb(io_mem + addr + 4);
 819                                addr += 5;
 820                                break;
 821
 822                        case 2:
 823                        case 4:
 824                                hpc_ptr->u.wpeg_ctlr.wpegbbar = readl(io_mem + addr);
 825                                hpc_ptr->u.wpeg_ctlr.i2c_addr = readb(io_mem + addr + 4);
 826                                hpc_ptr->irq = readb(io_mem + addr + 5);
 827                                addr += 6;
 828                                break;
 829                        default:
 830                                rc = -ENODEV;
 831                                goto error_no_slot;
 832                }
 833
 834                //reorganize chassis' linked list
 835                combine_wpg_for_chassis();
 836                combine_wpg_for_expansion();
 837                hpc_ptr->revision = 0xff;
 838                hpc_ptr->options = 0xff;
 839                hpc_ptr->starting_slot_num = hpc_ptr->slots[0].slot_num;
 840                hpc_ptr->ending_slot_num = hpc_ptr->slots[slot_num-1].slot_num;
 841
 842                // register slots with hpc core as well as create linked list of ibm slot
 843                for (index = 0; index < hpc_ptr->slot_count; index++) {
 844                        tmp_slot = kzalloc(sizeof(*tmp_slot), GFP_KERNEL);
 845                        if (!tmp_slot) {
 846                                rc = -ENOMEM;
 847                                goto error_no_slot;
 848                        }
 849
 850                        tmp_slot->flag = 1;
 851
 852                        tmp_slot->capabilities = hpc_ptr->slots[index].slot_cap;
 853                        if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_133_MAX) == EBDA_SLOT_133_MAX)
 854                                tmp_slot->supported_speed =  3;
 855                        else if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_100_MAX) == EBDA_SLOT_100_MAX)
 856                                tmp_slot->supported_speed =  2;
 857                        else if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_66_MAX) == EBDA_SLOT_66_MAX)
 858                                tmp_slot->supported_speed =  1;
 859
 860                        if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_PCIX_CAP) == EBDA_SLOT_PCIX_CAP)
 861                                tmp_slot->supported_bus_mode = 1;
 862                        else
 863                                tmp_slot->supported_bus_mode = 0;
 864
 865
 866                        tmp_slot->bus = hpc_ptr->slots[index].slot_bus_num;
 867
 868                        bus_info_ptr1 = ibmphp_find_same_bus_num(hpc_ptr->slots[index].slot_bus_num);
 869                        if (!bus_info_ptr1) {
 870                                rc = -ENODEV;
 871                                goto error;
 872                        }
 873                        tmp_slot->bus_on = bus_info_ptr1;
 874                        bus_info_ptr1 = NULL;
 875                        tmp_slot->ctrl = hpc_ptr;
 876
 877                        tmp_slot->ctlr_index = hpc_ptr->slots[index].ctl_index;
 878                        tmp_slot->number = hpc_ptr->slots[index].slot_num;
 879
 880                        rc = fillslotinfo(&tmp_slot->hotplug_slot);
 881                        if (rc)
 882                                goto error;
 883
 884                        rc = ibmphp_init_devno(&tmp_slot);
 885                        if (rc)
 886                                goto error;
 887                        tmp_slot->hotplug_slot.ops = &ibmphp_hotplug_slot_ops;
 888
 889                        // end of registering ibm slot with hotplug core
 890
 891                        list_add(&tmp_slot->ibm_slot_list, &ibmphp_slot_head);
 892                }
 893
 894                print_bus_info();
 895                list_add(&hpc_ptr->ebda_hpc_list, &ebda_hpc_head);
 896
 897        }                       /* each hpc  */
 898
 899        list_for_each_entry(tmp_slot, &ibmphp_slot_head, ibm_slot_list) {
 900                snprintf(name, SLOT_NAME_SIZE, "%s", create_file_name(tmp_slot));
 901                pci_hp_register(&tmp_slot->hotplug_slot,
 902                        pci_find_bus(0, tmp_slot->bus), tmp_slot->device, name);
 903        }
 904
 905        print_ebda_hpc();
 906        print_ibm_slot();
 907        return 0;
 908
 909error:
 910        kfree(tmp_slot);
 911error_no_slot:
 912        free_ebda_hpc(hpc_ptr);
 913error_no_hpc:
 914        iounmap(io_mem);
 915        return rc;
 916}
 917
 918/*
 919 * map info (bus, devfun, start addr, end addr..) of i/o, memory,
 920 * pfm from the physical addr to a list of resource.
 921 */
 922static int __init ebda_rsrc_rsrc(void)
 923{
 924        u16 addr;
 925        short rsrc;
 926        u8 type, rsrc_type;
 927        struct ebda_pci_rsrc *rsrc_ptr;
 928
 929        addr = rsrc_list_ptr->phys_addr;
 930        debug("now entering rsrc land\n");
 931        debug("offset of rsrc: %x\n", rsrc_list_ptr->phys_addr);
 932
 933        for (rsrc = 0; rsrc < rsrc_list_ptr->num_entries; rsrc++) {
 934                type = readb(io_mem + addr);
 935
 936                addr += 1;
 937                rsrc_type = type & EBDA_RSRC_TYPE_MASK;
 938
 939                if (rsrc_type == EBDA_IO_RSRC_TYPE) {
 940                        rsrc_ptr = alloc_ebda_pci_rsrc();
 941                        if (!rsrc_ptr) {
 942                                iounmap(io_mem);
 943                                return -ENOMEM;
 944                        }
 945                        rsrc_ptr->rsrc_type = type;
 946
 947                        rsrc_ptr->bus_num = readb(io_mem + addr);
 948                        rsrc_ptr->dev_fun = readb(io_mem + addr + 1);
 949                        rsrc_ptr->start_addr = readw(io_mem + addr + 2);
 950                        rsrc_ptr->end_addr = readw(io_mem + addr + 4);
 951                        addr += 6;
 952
 953                        debug("rsrc from io type ----\n");
 954                        debug("rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
 955                                rsrc_ptr->rsrc_type, rsrc_ptr->bus_num, rsrc_ptr->dev_fun, rsrc_ptr->start_addr, rsrc_ptr->end_addr);
 956
 957                        list_add(&rsrc_ptr->ebda_pci_rsrc_list, &ibmphp_ebda_pci_rsrc_head);
 958                }
 959
 960                if (rsrc_type == EBDA_MEM_RSRC_TYPE || rsrc_type == EBDA_PFM_RSRC_TYPE) {
 961                        rsrc_ptr = alloc_ebda_pci_rsrc();
 962                        if (!rsrc_ptr) {
 963                                iounmap(io_mem);
 964                                return -ENOMEM;
 965                        }
 966                        rsrc_ptr->rsrc_type = type;
 967
 968                        rsrc_ptr->bus_num = readb(io_mem + addr);
 969                        rsrc_ptr->dev_fun = readb(io_mem + addr + 1);
 970                        rsrc_ptr->start_addr = readl(io_mem + addr + 2);
 971                        rsrc_ptr->end_addr = readl(io_mem + addr + 6);
 972                        addr += 10;
 973
 974                        debug("rsrc from mem or pfm ---\n");
 975                        debug("rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
 976                                rsrc_ptr->rsrc_type, rsrc_ptr->bus_num, rsrc_ptr->dev_fun, rsrc_ptr->start_addr, rsrc_ptr->end_addr);
 977
 978                        list_add(&rsrc_ptr->ebda_pci_rsrc_list, &ibmphp_ebda_pci_rsrc_head);
 979                }
 980        }
 981        kfree(rsrc_list_ptr);
 982        rsrc_list_ptr = NULL;
 983        print_ebda_pci_rsrc();
 984        return 0;
 985}
 986
 987u16 ibmphp_get_total_controllers(void)
 988{
 989        return hpc_list_ptr->num_ctlrs;
 990}
 991
 992struct slot *ibmphp_get_slot_from_physical_num(u8 physical_num)
 993{
 994        struct slot *slot;
 995
 996        list_for_each_entry(slot, &ibmphp_slot_head, ibm_slot_list) {
 997                if (slot->number == physical_num)
 998                        return slot;
 999        }
1000        return NULL;
1001}
1002
1003/* To find:
1004 *      - the smallest slot number
1005 *      - the largest slot number
1006 *      - the total number of the slots based on each bus
1007 *        (if only one slot per bus slot_min = slot_max )
1008 */
1009struct bus_info *ibmphp_find_same_bus_num(u32 num)
1010{
1011        struct bus_info *ptr;
1012
1013        list_for_each_entry(ptr, &bus_info_head, bus_info_list) {
1014                if (ptr->busno == num)
1015                         return ptr;
1016        }
1017        return NULL;
1018}
1019
1020/*  Finding relative bus number, in order to map corresponding
1021 *  bus register
1022 */
1023int ibmphp_get_bus_index(u8 num)
1024{
1025        struct bus_info *ptr;
1026
1027        list_for_each_entry(ptr, &bus_info_head, bus_info_list) {
1028                if (ptr->busno == num)
1029                        return ptr->index;
1030        }
1031        return -ENODEV;
1032}
1033
1034void ibmphp_free_bus_info_queue(void)
1035{
1036        struct bus_info *bus_info, *next;
1037
1038        list_for_each_entry_safe(bus_info, next, &bus_info_head,
1039                                 bus_info_list) {
1040                kfree (bus_info);
1041        }
1042}
1043
1044void ibmphp_free_ebda_hpc_queue(void)
1045{
1046        struct controller *controller = NULL, *next;
1047        int pci_flag = 0;
1048
1049        list_for_each_entry_safe(controller, next, &ebda_hpc_head,
1050                                 ebda_hpc_list) {
1051                if (controller->ctlr_type == 0)
1052                        release_region(controller->u.isa_ctlr.io_start, (controller->u.isa_ctlr.io_end - controller->u.isa_ctlr.io_start + 1));
1053                else if ((controller->ctlr_type == 1) && (!pci_flag)) {
1054                        ++pci_flag;
1055                        pci_unregister_driver(&ibmphp_driver);
1056                }
1057                free_ebda_hpc(controller);
1058        }
1059}
1060
1061void ibmphp_free_ebda_pci_rsrc_queue(void)
1062{
1063        struct ebda_pci_rsrc *resource, *next;
1064
1065        list_for_each_entry_safe(resource, next, &ibmphp_ebda_pci_rsrc_head,
1066                                 ebda_pci_rsrc_list) {
1067                kfree (resource);
1068                resource = NULL;
1069        }
1070}
1071
1072static const struct pci_device_id id_table[] = {
1073        {
1074                .vendor         = PCI_VENDOR_ID_IBM,
1075                .device         = HPC_DEVICE_ID,
1076                .subvendor      = PCI_VENDOR_ID_IBM,
1077                .subdevice      = HPC_SUBSYSTEM_ID,
1078                .class          = ((PCI_CLASS_SYSTEM_PCI_HOTPLUG << 8) | 0x00),
1079        }, {}
1080};
1081
1082MODULE_DEVICE_TABLE(pci, id_table);
1083
1084static int ibmphp_probe(struct pci_dev *, const struct pci_device_id *);
1085static struct pci_driver ibmphp_driver = {
1086        .name           = "ibmphp",
1087        .id_table       = id_table,
1088        .probe          = ibmphp_probe,
1089};
1090
1091int ibmphp_register_pci(void)
1092{
1093        struct controller *ctrl;
1094        int rc = 0;
1095
1096        list_for_each_entry(ctrl, &ebda_hpc_head, ebda_hpc_list) {
1097                if (ctrl->ctlr_type == 1) {
1098                        rc = pci_register_driver(&ibmphp_driver);
1099                        break;
1100                }
1101        }
1102        return rc;
1103}
1104static int ibmphp_probe(struct pci_dev *dev, const struct pci_device_id *ids)
1105{
1106        struct controller *ctrl;
1107
1108        debug("inside ibmphp_probe\n");
1109
1110        list_for_each_entry(ctrl, &ebda_hpc_head, ebda_hpc_list) {
1111                if (ctrl->ctlr_type == 1) {
1112                        if ((dev->devfn == ctrl->u.pci_ctlr.dev_fun) && (dev->bus->number == ctrl->u.pci_ctlr.bus)) {
1113                                ctrl->ctrl_dev = dev;
1114                                debug("found device!!!\n");
1115                                debug("dev->device = %x, dev->subsystem_device = %x\n", dev->device, dev->subsystem_device);
1116                                return 0;
1117                        }
1118                }
1119        }
1120        return -ENODEV;
1121}
1122