// SPDX-License-Identifier: GPL-2.0-only
//
// tegra_audio_graph_card.c - Audio Graph based Tegra Machine Driver
//
// Copyright (c) 2020-2021 NVIDIA CORPORATION.  All rights reserved.

#include <linux/math64.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <sound/graph_card.h>
#include <sound/pcm_params.h>

#define MAX_PLLA_OUT0_DIV 128

#define simple_to_tegra_priv(simple) \
                container_of(simple, struct tegra_audio_priv, simple)

enum srate_type {
        /*
         * Sample rates multiple of 8000 Hz and below are supported:
         * ( 8000, 16000, 32000, 48000, 96000, 192000 Hz )
         */
        x8_RATE,

        /*
         * Sample rates multiple of 11025 Hz and below are supported:
         * ( 11025, 22050, 44100, 88200, 176400 Hz )
         */
        x11_RATE,

        NUM_RATE_TYPE,
};

struct tegra_audio_priv {
        struct asoc_simple_priv simple;
        struct clk *clk_plla_out0;
        struct clk *clk_plla;
};

/* Tegra audio chip data */
struct tegra_audio_cdata {
        unsigned int plla_rates[NUM_RATE_TYPE];
        unsigned int plla_out0_rates[NUM_RATE_TYPE];
};

/* Setup PLL clock as per the given sample rate */
static int tegra_audio_graph_update_pll(struct snd_pcm_substream *substream,
                                        struct snd_pcm_hw_params *params)
{
        struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
        struct asoc_simple_priv *simple = snd_soc_card_get_drvdata(rtd->card);
        struct tegra_audio_priv *priv = simple_to_tegra_priv(simple);
        struct device *dev = rtd->card->dev;
        const struct tegra_audio_cdata *data = of_device_get_match_data(dev);
        unsigned int plla_rate, plla_out0_rate, bclk;
        unsigned int srate = params_rate(params);
        int err;

        switch (srate) {
        case 11025:
        case 22050:
        case 44100:
        case 88200:
        case 176400:
                plla_out0_rate = data->plla_out0_rates[x11_RATE];
                plla_rate = data->plla_rates[x11_RATE];
                break;
        case 8000:
        case 16000:
        case 32000:
        case 48000:
        case 96000:
        case 192000:
                plla_out0_rate = data->plla_out0_rates[x8_RATE];
                plla_rate = data->plla_rates[x8_RATE];
                break;
        default:
                dev_err(rtd->card->dev, "Unsupported sample rate %u\n",
                        srate);
                return -EINVAL;
        }

        /*
         * Below is the clock relation:
         *
         *      PLLA
         *        |
         *        |--> PLLA_OUT0
         *                |
         *                |---> I2S modules
         *                |
         *                |---> DMIC modules
         *                |
         *                |---> DSPK modules
         *
         *
         * Default PLLA_OUT0 rate might be too high when I/O is running
         * at minimum PCM configurations. This may result in incorrect
         * clock rates and glitchy audio. The maximum divider is 128
         * and any thing higher than that won't work. Thus reduce PLLA_OUT0
         * to work for lower configurations.
         *
         * This problem is seen for I2S only, as DMIC and DSPK minimum
         * clock requirements are under allowed divider limits.
         */
        bclk = srate * params_channels(params) * params_width(params);
        if (div_u64(plla_out0_rate, bclk) > MAX_PLLA_OUT0_DIV)
                plla_out0_rate >>= 1;

        dev_dbg(rtd->card->dev,
                "Update clock rates: PLLA(= %u Hz) and PLLA_OUT0(= %u Hz)\n",
                plla_rate, plla_out0_rate);

        /* Set PLLA rate */
        err = clk_set_rate(priv->clk_plla, plla_rate);
        if (err) {
                dev_err(rtd->card->dev,
                        "Can't set plla rate for %u, err: %d\n",
                        plla_rate, err);
                return err;
        }

        /* Set PLLA_OUT0 rate */
        err = clk_set_rate(priv->clk_plla_out0, plla_out0_rate);
        if (err) {
                dev_err(rtd->card->dev,
                        "Can't set plla_out0 rate %u, err: %d\n",
                        plla_out0_rate, err);
                return err;
        }

        return err;
}

static int tegra_audio_graph_hw_params(struct snd_pcm_substream *substream,
                                       struct snd_pcm_hw_params *params)
{
        struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
        struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
        int err;

        /*
         * This gets called for each DAI link (FE or BE) when DPCM is used.
         * We may not want to update PLLA rate for each call. So PLLA update
         * must be restricted to external I/O links (I2S, DMIC or DSPK) since
         * they actually depend on it. I/O modules update their clocks in
         * hw_param() of their respective component driver and PLLA rate
         * update here helps them to derive appropriate rates.
         *
         * TODO: When more HW accelerators get added (like sample rate
         * converter, volume gain controller etc., which don't really
         * depend on PLLA) we need a better way to filter here.
         */
        if (cpu_dai->driver->ops && rtd->dai_link->no_pcm) {
                err = tegra_audio_graph_update_pll(substream, params);
                if (err)
                        return err;
        }

        return asoc_simple_hw_params(substream, params);
}

static const struct snd_soc_ops tegra_audio_graph_ops = {
        .startup        = asoc_simple_startup,
        .shutdown       = asoc_simple_shutdown,
        .hw_params      = tegra_audio_graph_hw_params,
};

static int tegra_audio_graph_card_probe(struct snd_soc_card *card)
{
        struct asoc_simple_priv *simple = snd_soc_card_get_drvdata(card);
        struct tegra_audio_priv *priv = simple_to_tegra_priv(simple);

        priv->clk_plla = devm_clk_get(card->dev, "pll_a");
        if (IS_ERR(priv->clk_plla)) {
                dev_err(card->dev, "Can't retrieve clk pll_a\n");
                return PTR_ERR(priv->clk_plla);
        }

        priv->clk_plla_out0 = devm_clk_get(card->dev, "plla_out0");
        if (IS_ERR(priv->clk_plla_out0)) {
                dev_err(card->dev, "Can't retrieve clk plla_out0\n");
                return PTR_ERR(priv->clk_plla_out0);
        }

        return asoc_graph_card_probe(card);
}

static int tegra_audio_graph_probe(struct platform_device *pdev)
{
        struct tegra_audio_priv *priv;
        struct device *dev = &pdev->dev;
        struct snd_soc_card *card;

        priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
        if (!priv)
                return -ENOMEM;

        card = simple_priv_to_card(&priv->simple);
        card->driver_name = "tegra-ape";

        card->probe = tegra_audio_graph_card_probe;

        /* audio_graph_parse_of() depends on below */
        card->component_chaining = 1;
        priv->simple.ops = &tegra_audio_graph_ops;
        priv->simple.force_dpcm = 1;

        return audio_graph_parse_of(&priv->simple, dev);
}

static const struct tegra_audio_cdata tegra210_data = {
        /* PLLA */
        .plla_rates[x8_RATE] = 368640000,
        .plla_rates[x11_RATE] = 338688000,
        /* PLLA_OUT0 */
        .plla_out0_rates[x8_RATE] = 49152000,
        .plla_out0_rates[x11_RATE] = 45158400,
};

static const struct tegra_audio_cdata tegra186_data = {
        /* PLLA */
        .plla_rates[x8_RATE] = 245760000,
        .plla_rates[x11_RATE] = 270950400,
        /* PLLA_OUT0 */
        .plla_out0_rates[x8_RATE] = 49152000,
        .plla_out0_rates[x11_RATE] = 45158400,
};

static const struct of_device_id graph_of_tegra_match[] = {
        { .compatible = "nvidia,tegra210-audio-graph-card",
          .data = &tegra210_data },
        { .compatible = "nvidia,tegra186-audio-graph-card",
          .data = &tegra186_data },
        {},
};
MODULE_DEVICE_TABLE(of, graph_of_tegra_match);

static struct platform_driver tegra_audio_graph_card = {
        .driver = {
                .name = "tegra-audio-graph-card",
                .pm = &snd_soc_pm_ops,
                .of_match_table = graph_of_tegra_match,
        },
        .probe = tegra_audio_graph_probe,
        .remove = asoc_simple_remove,
};
module_platform_driver(tegra_audio_graph_card);

MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("ASoC Tegra Audio Graph Sound Card");
MODULE_AUTHOR("Sameer Pujar <spujar@nvidia.com>");