/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __HEAD_BOOKE_H__
#define __HEAD_BOOKE_H__

#include <asm/ptrace.h> /* for STACK_FRAME_REGS_MARKER */
#include <asm/kvm_asm.h>
#include <asm/kvm_booke_hv_asm.h>

#ifdef __ASSEMBLY__

/*
 * Macros used for common Book-e exception handling
 */

#define SET_IVOR(vector_number, vector_label)           \
                li      r26,vector_label@l;             \
                mtspr   SPRN_IVOR##vector_number,r26;   \
                sync

#if (THREAD_SHIFT < 15)
#define ALLOC_STACK_FRAME(reg, val)                     \
        addi reg,reg,val
#else
#define ALLOC_STACK_FRAME(reg, val)                     \
        addis   reg,reg,val@ha;                         \
        addi    reg,reg,val@l
#endif

/*
 * Macro used to get to thread save registers.
 * Note that entries 0-3 are used for the prolog code, and the remaining
 * entries are available for specific exception use in the event a handler
 * requires more than 4 scratch registers.
 */
#define THREAD_NORMSAVE(offset) (THREAD_NORMSAVES + (offset * 4))

#ifdef CONFIG_PPC_FSL_BOOK3E
#define BOOKE_CLEAR_BTB(reg)                                                                    \
START_BTB_FLUSH_SECTION                                                         \
        BTB_FLUSH(reg)                                                                  \
END_BTB_FLUSH_SECTION
#else
#define BOOKE_CLEAR_BTB(reg)
#endif


#define NORMAL_EXCEPTION_PROLOG(trapno, intno)                                               \
        mtspr   SPRN_SPRG_WSCRATCH0, r10;       /* save one register */      \
        mfspr   r10, SPRN_SPRG_THREAD;                                       \
        stw     r11, THREAD_NORMSAVE(0)(r10);                                \
        stw     r13, THREAD_NORMSAVE(2)(r10);                                \
        mfcr    r13;                    /* save CR in r13 for now          */\
        mfspr   r11, SPRN_SRR1;                                              \
        DO_KVM  BOOKE_INTERRUPT_##intno SPRN_SRR1;                           \
        andi.   r11, r11, MSR_PR;       /* check whether user or kernel    */\
        LOAD_REG_IMMEDIATE(r11, MSR_KERNEL);                            \
        mtmsr   r11;                                                    \
        mr      r11, r1;                                                     \
        beq     1f;                                                          \
        BOOKE_CLEAR_BTB(r11)                                            \
        /* if from user, start at top of this thread's kernel stack */       \
        lwz     r11, TASK_STACK - THREAD(r10);                               \
        ALLOC_STACK_FRAME(r11, THREAD_SIZE);                                 \
1 :     subi    r11, r11, INT_FRAME_SIZE; /* Allocate exception frame */     \
        stw     r13, _CCR(r11);         /* save various registers */         \
        stw     r12,GPR12(r11);                                              \
        stw     r9,GPR9(r11);                                                \
        mfspr   r13, SPRN_SPRG_RSCRATCH0;                                    \
        stw     r13, GPR10(r11);                                             \
        lwz     r12, THREAD_NORMSAVE(0)(r10);                                \
        stw     r12,GPR11(r11);                                              \
        lwz     r13, THREAD_NORMSAVE(2)(r10); /* restore r13 */              \
        mflr    r10;                                                         \
        stw     r10,_LINK(r11);                                              \
        mfspr   r12,SPRN_SRR0;                                               \
        stw     r1, GPR1(r11);                                               \
        mfspr   r9,SPRN_SRR1;                                                \
        stw     r1, 0(r11);                                                  \
        mr      r1, r11;                                                     \
        rlwinm  r9,r9,0,14,12;          /* clear MSR_WE (necessary?)       */\
        COMMON_EXCEPTION_PROLOG_END trapno

.macro COMMON_EXCEPTION_PROLOG_END trapno
        stw     r0,GPR0(r1)
        lis     r10, STACK_FRAME_REGS_MARKER@ha /* exception frame marker */
        addi    r10, r10, STACK_FRAME_REGS_MARKER@l
        stw     r10, 8(r1)
        li      r10, \trapno
        stw     r10,_TRAP(r1)
        SAVE_4GPRS(3, r1)
        SAVE_2GPRS(7, r1)
        SAVE_NVGPRS(r1)
        stw     r2,GPR2(r1)
        stw     r12,_NIP(r1)
        stw     r9,_MSR(r1)
        mfctr   r10
        mfspr   r2,SPRN_SPRG_THREAD
        stw     r10,_CTR(r1)
        tovirt(r2, r2)
        mfspr   r10,SPRN_XER
        addi    r2, r2, -THREAD
        stw     r10,_XER(r1)
        addi    r3,r1,STACK_FRAME_OVERHEAD
.endm

.macro prepare_transfer_to_handler
#ifdef CONFIG_E500
        andi.   r12,r9,MSR_PR
        bne     777f
        bl      prepare_transfer_to_handler
777:
#endif
.endm

.macro SYSCALL_ENTRY trapno intno srr1
        mfspr   r10, SPRN_SPRG_THREAD
#ifdef CONFIG_KVM_BOOKE_HV
BEGIN_FTR_SECTION
        mtspr   SPRN_SPRG_WSCRATCH0, r10
        stw     r11, THREAD_NORMSAVE(0)(r10)
        stw     r13, THREAD_NORMSAVE(2)(r10)
        mfcr    r13                     /* save CR in r13 for now          */
        mfspr   r11, SPRN_SRR1
        mtocrf  0x80, r11       /* check MSR[GS] without clobbering reg */
        bf      3, 1975f
        b       kvmppc_handler_\intno\()_\srr1
1975:
        mr      r12, r13
        lwz     r13, THREAD_NORMSAVE(2)(r10)
FTR_SECTION_ELSE
        mfcr    r12
ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV)
#else
        mfcr    r12
#endif
        mfspr   r9, SPRN_SRR1
        BOOKE_CLEAR_BTB(r11)
        mr      r11, r1
        lwz     r1, TASK_STACK - THREAD(r10)
        rlwinm  r12,r12,0,4,2   /* Clear SO bit in CR */
        ALLOC_STACK_FRAME(r1, THREAD_SIZE - INT_FRAME_SIZE)
        stw     r12, _CCR(r1)
        mfspr   r12,SPRN_SRR0
        stw     r12,_NIP(r1)
        b       transfer_to_syscall     /* jump to handler */
.endm

/* To handle the additional exception priority levels on 40x and Book-E
 * processors we allocate a stack per additional priority level.
 *
 * On 40x critical is the only additional level
 * On 44x/e500 we have critical and machine check
 *
 * Additionally we reserve a SPRG for each priority level so we can free up a
 * GPR to use as the base for indirect access to the exception stacks.  This
 * is necessary since the MMU is always on, for Book-E parts, and the stacks
 * are offset from KERNELBASE.
 *
 * There is some space optimization to be had here if desired.  However
 * to allow for a common kernel with support for debug exceptions either
 * going to critical or their own debug level we aren't currently
 * providing configurations that micro-optimize space usage.
 */

#define MC_STACK_BASE           mcheckirq_ctx
#define CRIT_STACK_BASE         critirq_ctx

/* only on e500mc */
#define DBG_STACK_BASE          dbgirq_ctx

#ifdef CONFIG_SMP
#define BOOKE_LOAD_EXC_LEVEL_STACK(level)               \
        mfspr   r8,SPRN_PIR;                            \
        slwi    r8,r8,2;                                \
        addis   r8,r8,level##_STACK_BASE@ha;            \
        lwz     r8,level##_STACK_BASE@l(r8);            \
        addi    r8,r8,THREAD_SIZE - INT_FRAME_SIZE;
#else
#define BOOKE_LOAD_EXC_LEVEL_STACK(level)               \
        lis     r8,level##_STACK_BASE@ha;               \
        lwz     r8,level##_STACK_BASE@l(r8);            \
        addi    r8,r8,THREAD_SIZE - INT_FRAME_SIZE;
#endif

/*
 * Exception prolog for critical/machine check exceptions.  This is a
 * little different from the normal exception prolog above since a
 * critical/machine check exception can potentially occur at any point
 * during normal exception processing. Thus we cannot use the same SPRG
 * registers as the normal prolog above. Instead we use a portion of the
 * critical/machine check exception stack at low physical addresses.
 */
#define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, trapno, intno, exc_level_srr0, exc_level_srr1) \
        mtspr   SPRN_SPRG_WSCRATCH_##exc_level,r8;                           \
        BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
        stw     r9,GPR9(r8);            /* save various registers          */\
        mfcr    r9;                     /* save CR in r9 for now           */\
        stw     r10,GPR10(r8);                                               \
        stw     r11,GPR11(r8);                                               \
        stw     r9,_CCR(r8);            /* save CR on stack                */\
        mfspr   r11,exc_level_srr1;     /* check whether user or kernel    */\
        DO_KVM  BOOKE_INTERRUPT_##intno exc_level_srr1;                      \
        BOOKE_CLEAR_BTB(r10)                                            \
        andi.   r11,r11,MSR_PR;                                              \
        LOAD_REG_IMMEDIATE(r11, MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE));  \
        mtmsr   r11;                                                    \
        mfspr   r11,SPRN_SPRG_THREAD;   /* if from user, start at top of   */\
        lwz     r11, TASK_STACK - THREAD(r11); /* this thread's kernel stack */\
        addi    r11,r11,THREAD_SIZE - INT_FRAME_SIZE;   /* allocate stack frame    */\
        beq     1f;                                                          \
        /* COMING FROM USER MODE */                                          \
        stw     r9,_CCR(r11);           /* save CR                         */\
        lwz     r10,GPR10(r8);          /* copy regs from exception stack  */\
        lwz     r9,GPR9(r8);                                                 \
        stw     r10,GPR10(r11);                                              \
        lwz     r10,GPR11(r8);                                               \
        stw     r9,GPR9(r11);                                                \
        stw     r10,GPR11(r11);                                              \
        b       2f;                                                          \
        /* COMING FROM PRIV MODE */                                          \
1:      mr      r11, r8;                                                             \
2:      mfspr   r8,SPRN_SPRG_RSCRATCH_##exc_level;                           \
        stw     r12,GPR12(r11);         /* save various registers          */\
        mflr    r10;                                                         \
        stw     r10,_LINK(r11);                                              \
        mfspr   r12,SPRN_DEAR;          /* save DEAR and ESR in the frame  */\
        stw     r12,_DEAR(r11);         /* since they may have had stuff   */\
        mfspr   r9,SPRN_ESR;            /* in them at the point where the  */\
        stw     r9,_ESR(r11);           /* exception was taken             */\
        mfspr   r12,exc_level_srr0;                                          \
        stw     r1,GPR1(r11);                                                \
        mfspr   r9,exc_level_srr1;                                           \
        stw     r1,0(r11);                                                   \
        mr      r1,r11;                                                      \
        rlwinm  r9,r9,0,14,12;          /* clear MSR_WE (necessary?)       */\
        COMMON_EXCEPTION_PROLOG_END trapno

#define SAVE_xSRR(xSRR)                 \
        mfspr   r0,SPRN_##xSRR##0;      \
        stw     r0,_##xSRR##0(r1);      \
        mfspr   r0,SPRN_##xSRR##1;      \
        stw     r0,_##xSRR##1(r1)


.macro SAVE_MMU_REGS
#ifdef CONFIG_PPC_BOOK3E_MMU
        mfspr   r0,SPRN_MAS0
        stw     r0,MAS0(r1)
        mfspr   r0,SPRN_MAS1
        stw     r0,MAS1(r1)
        mfspr   r0,SPRN_MAS2
        stw     r0,MAS2(r1)
        mfspr   r0,SPRN_MAS3
        stw     r0,MAS3(r1)
        mfspr   r0,SPRN_MAS6
        stw     r0,MAS6(r1)
#ifdef CONFIG_PHYS_64BIT
        mfspr   r0,SPRN_MAS7
        stw     r0,MAS7(r1)
#endif /* CONFIG_PHYS_64BIT */
#endif /* CONFIG_PPC_BOOK3E_MMU */
#ifdef CONFIG_44x
        mfspr   r0,SPRN_MMUCR
        stw     r0,MMUCR(r1)
#endif
.endm

#define CRITICAL_EXCEPTION_PROLOG(trapno, intno) \
                EXC_LEVEL_EXCEPTION_PROLOG(CRIT, trapno+2, intno, SPRN_CSRR0, SPRN_CSRR1)
#define DEBUG_EXCEPTION_PROLOG(trapno) \
                EXC_LEVEL_EXCEPTION_PROLOG(DBG, trapno+8, DEBUG, SPRN_DSRR0, SPRN_DSRR1)
#define MCHECK_EXCEPTION_PROLOG(trapno) \
                EXC_LEVEL_EXCEPTION_PROLOG(MC, trapno+4, MACHINE_CHECK, \
                        SPRN_MCSRR0, SPRN_MCSRR1)

/*
 * Guest Doorbell -- this is a bit odd in that uses GSRR0/1 despite
 * being delivered to the host.  This exception can only happen
 * inside a KVM guest -- so we just handle up to the DO_KVM rather
 * than try to fit this into one of the existing prolog macros.
 */
#define GUEST_DOORBELL_EXCEPTION \
        START_EXCEPTION(GuestDoorbell);                                      \
        mtspr   SPRN_SPRG_WSCRATCH0, r10;       /* save one register */      \
        mfspr   r10, SPRN_SPRG_THREAD;                                       \
        stw     r11, THREAD_NORMSAVE(0)(r10);                                \
        mfspr   r11, SPRN_SRR1;                                              \
        stw     r13, THREAD_NORMSAVE(2)(r10);                                \
        mfcr    r13;                    /* save CR in r13 for now          */\
        DO_KVM  BOOKE_INTERRUPT_GUEST_DBELL SPRN_GSRR1;                      \
        trap

/*
 * Exception vectors.
 */
#define START_EXCEPTION(label)                                               \
        .align 5;                                                            \
label:

#define EXCEPTION(n, intno, label, hdlr)                        \
        START_EXCEPTION(label);                                 \
        NORMAL_EXCEPTION_PROLOG(n, intno);                      \
        prepare_transfer_to_handler;                            \
        bl      hdlr;                                           \
        b       interrupt_return

#define CRITICAL_EXCEPTION(n, intno, label, hdlr)                       \
        START_EXCEPTION(label);                                         \
        CRITICAL_EXCEPTION_PROLOG(n, intno);                            \
        SAVE_MMU_REGS;                                                  \
        SAVE_xSRR(SRR);                                                 \
        prepare_transfer_to_handler;                                    \
        bl      hdlr;                                                   \
        b       ret_from_crit_exc

#define MCHECK_EXCEPTION(n, label, hdlr)                        \
        START_EXCEPTION(label);                                 \
        MCHECK_EXCEPTION_PROLOG(n);                             \
        mfspr   r5,SPRN_ESR;                                    \
        stw     r5,_ESR(r11);                                   \
        SAVE_xSRR(DSRR);                                        \
        SAVE_xSRR(CSRR);                                        \
        SAVE_MMU_REGS;                                          \
        SAVE_xSRR(SRR);                                         \
        prepare_transfer_to_handler;                            \
        bl      hdlr;                                           \
        b       ret_from_mcheck_exc

/* Check for a single step debug exception while in an exception
 * handler before state has been saved.  This is to catch the case
 * where an instruction that we are trying to single step causes
 * an exception (eg ITLB/DTLB miss) and thus the first instruction of
 * the exception handler generates a single step debug exception.
 *
 * If we get a debug trap on the first instruction of an exception handler,
 * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
 * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
 * The exception handler was handling a non-critical interrupt, so it will
 * save (and later restore) the MSR via SPRN_CSRR1, which will still have
 * the MSR_DE bit set.
 */
#define DEBUG_DEBUG_EXCEPTION                                                 \
        START_EXCEPTION(DebugDebug);                                          \
        DEBUG_EXCEPTION_PROLOG(2000);                                                 \
                                                                              \
        /*                                                                    \
         * If there is a single step or branch-taken exception in an          \
         * exception entry sequence, it was probably meant to apply to        \
         * the code where the exception occurred (since exception entry       \
         * doesn't turn off DE automatically).  We simulate the effect        \
         * of turning off DE on entry to an exception handler by turning      \
         * off DE in the DSRR1 value and clearing the debug status.           \
         */                                                                   \
        mfspr   r10,SPRN_DBSR;          /* check single-step/branch taken */  \
        andis.  r10,r10,(DBSR_IC|DBSR_BT)@h;                                  \
        beq+    2f;                                                           \
                                                                              \
        lis     r10,interrupt_base@h;   /* check if exception in vectors */   \
        ori     r10,r10,interrupt_base@l;                                     \
        cmplw   r12,r10;                                                      \
        blt+    2f;                     /* addr below exception vectors */    \
                                                                              \
        lis     r10,interrupt_end@h;                                          \
        ori     r10,r10,interrupt_end@l;                                      \
        cmplw   r12,r10;                                                      \
        bgt+    2f;                     /* addr above exception vectors */    \
                                                                              \
        /* here it looks like we got an inappropriate debug exception. */     \
1:      rlwinm  r9,r9,0,~MSR_DE;        /* clear DE in the CDRR1 value */     \
        lis     r10,(DBSR_IC|DBSR_BT)@h;        /* clear the IC event */      \
        mtspr   SPRN_DBSR,r10;                                                \
        /* restore state and get out */                                       \
        lwz     r10,_CCR(r11);                                                \
        lwz     r0,GPR0(r11);                                                 \
        lwz     r1,GPR1(r11);                                                 \
        mtcrf   0x80,r10;                                                     \
        mtspr   SPRN_DSRR0,r12;                                               \
        mtspr   SPRN_DSRR1,r9;                                                \
        lwz     r9,GPR9(r11);                                                 \
        lwz     r12,GPR12(r11);                                               \
        mtspr   SPRN_SPRG_WSCRATCH_DBG,r8;                                    \
        BOOKE_LOAD_EXC_LEVEL_STACK(DBG); /* r8 points to the debug stack */ \
        lwz     r10,GPR10(r8);                                                \
        lwz     r11,GPR11(r8);                                                \
        mfspr   r8,SPRN_SPRG_RSCRATCH_DBG;                                    \
                                                                              \
        PPC_RFDI;                                                             \
        b       .;                                                            \
                                                                              \
        /* continue normal handling for a debug exception... */               \
2:      mfspr   r4,SPRN_DBSR;                                                 \
        stw     r4,_ESR(r11);           /* DebugException takes DBSR in _ESR */\
        SAVE_xSRR(CSRR);                                                      \
        SAVE_MMU_REGS;                                                        \
        SAVE_xSRR(SRR);                                                       \
        prepare_transfer_to_handler;                                  \
        bl      DebugException;                                               \
        b       ret_from_debug_exc

#define DEBUG_CRIT_EXCEPTION                                                  \
        START_EXCEPTION(DebugCrit);                                           \
        CRITICAL_EXCEPTION_PROLOG(2000,DEBUG);                                \
                                                                              \
        /*                                                                    \
         * If there is a single step or branch-taken exception in an          \
         * exception entry sequence, it was probably meant to apply to        \
         * the code where the exception occurred (since exception entry       \
         * doesn't turn off DE automatically).  We simulate the effect        \
         * of turning off DE on entry to an exception handler by turning      \
         * off DE in the CSRR1 value and clearing the debug status.           \
         */                                                                   \
        mfspr   r10,SPRN_DBSR;          /* check single-step/branch taken */  \
        andis.  r10,r10,(DBSR_IC|DBSR_BT)@h;                                  \
        beq+    2f;                                                           \
                                                                              \
        lis     r10,interrupt_base@h;   /* check if exception in vectors */   \
        ori     r10,r10,interrupt_base@l;                                     \
        cmplw   r12,r10;                                                      \
        blt+    2f;                     /* addr below exception vectors */    \
                                                                              \
        lis     r10,interrupt_end@h;                                          \
        ori     r10,r10,interrupt_end@l;                                      \
        cmplw   r12,r10;                                                      \
        bgt+    2f;                     /* addr above exception vectors */    \
                                                                              \
        /* here it looks like we got an inappropriate debug exception. */     \
1:      rlwinm  r9,r9,0,~MSR_DE;        /* clear DE in the CSRR1 value */     \
        lis     r10,(DBSR_IC|DBSR_BT)@h;        /* clear the IC event */      \
        mtspr   SPRN_DBSR,r10;                                                \
        /* restore state and get out */                                       \
        lwz     r10,_CCR(r11);                                                \
        lwz     r0,GPR0(r11);                                                 \
        lwz     r1,GPR1(r11);                                                 \
        mtcrf   0x80,r10;                                                     \
        mtspr   SPRN_CSRR0,r12;                                               \
        mtspr   SPRN_CSRR1,r9;                                                \
        lwz     r9,GPR9(r11);                                                 \
        lwz     r12,GPR12(r11);                                               \
        mtspr   SPRN_SPRG_WSCRATCH_CRIT,r8;                                   \
        BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */  \
        lwz     r10,GPR10(r8);                                                \
        lwz     r11,GPR11(r8);                                                \
        mfspr   r8,SPRN_SPRG_RSCRATCH_CRIT;                                   \
                                                                              \
        rfci;                                                                 \
        b       .;                                                            \
                                                                              \
        /* continue normal handling for a critical exception... */            \
2:      mfspr   r4,SPRN_DBSR;                                                 \
        stw     r4,_ESR(r11);           /* DebugException takes DBSR in _ESR */\
        SAVE_MMU_REGS;                                                        \
        SAVE_xSRR(SRR);                                                       \
        prepare_transfer_to_handler;                                          \
        bl      DebugException;                                               \
        b       ret_from_crit_exc

#define DATA_STORAGE_EXCEPTION                                                \
        START_EXCEPTION(DataStorage)                                          \
        NORMAL_EXCEPTION_PROLOG(0x300, DATA_STORAGE);                 \
        mfspr   r5,SPRN_ESR;            /* Grab the ESR and save it */        \
        stw     r5,_ESR(r11);                                                 \
        mfspr   r4,SPRN_DEAR;           /* Grab the DEAR */                   \
        stw     r4, _DEAR(r11);                                               \
        prepare_transfer_to_handler;                                          \
        bl      do_page_fault;                                                \
        b       interrupt_return

#define INSTRUCTION_STORAGE_EXCEPTION                                         \
        START_EXCEPTION(InstructionStorage)                                   \
        NORMAL_EXCEPTION_PROLOG(0x400, INST_STORAGE);                 \
        mfspr   r5,SPRN_ESR;            /* Grab the ESR and save it */        \
        stw     r5,_ESR(r11);                                                 \
        stw     r12, _DEAR(r11);        /* Pass SRR0 as arg2 */               \
        prepare_transfer_to_handler;                                          \
        bl      do_page_fault;                                                \
        b       interrupt_return

#define ALIGNMENT_EXCEPTION                                                   \
        START_EXCEPTION(Alignment)                                            \
        NORMAL_EXCEPTION_PROLOG(0x600, ALIGNMENT);                    \
        mfspr   r4,SPRN_DEAR;           /* Grab the DEAR and save it */       \
        stw     r4,_DEAR(r11);                                                \
        prepare_transfer_to_handler;                                          \
        bl      alignment_exception;                                          \
        REST_NVGPRS(r1);                                                      \
        b       interrupt_return

#define PROGRAM_EXCEPTION                                                     \
        START_EXCEPTION(Program)                                              \
        NORMAL_EXCEPTION_PROLOG(0x700, PROGRAM);                      \
        mfspr   r4,SPRN_ESR;            /* Grab the ESR and save it */        \
        stw     r4,_ESR(r11);                                                 \
        prepare_transfer_to_handler;                                          \
        bl      program_check_exception;                                      \
        REST_NVGPRS(r1);                                                      \
        b       interrupt_return

#define DECREMENTER_EXCEPTION                                                 \
        START_EXCEPTION(Decrementer)                                          \
        NORMAL_EXCEPTION_PROLOG(0x900, DECREMENTER);                  \
        lis     r0,TSR_DIS@h;           /* Setup the DEC interrupt mask */    \
        mtspr   SPRN_TSR,r0;            /* Clear the DEC interrupt */         \
        prepare_transfer_to_handler;                                          \
        bl      timer_interrupt;                                              \
        b       interrupt_return

#define FP_UNAVAILABLE_EXCEPTION                                              \
        START_EXCEPTION(FloatingPointUnavailable)                             \
        NORMAL_EXCEPTION_PROLOG(0x800, FP_UNAVAIL);                   \
        beq     1f;                                                           \
        bl      load_up_fpu;            /* if from user, just load it up */   \
        b       fast_exception_return;                                        \
1:      prepare_transfer_to_handler;                                          \
        bl      kernel_fp_unavailable_exception;                              \
        b       interrupt_return

#endif /* __ASSEMBLY__ */
#endif /* __HEAD_BOOKE_H__ */