1
2
3
4
5
6
7#include <linux/module.h>
8#include <linux/kernel.h>
9#include <linux/init.h>
10#include <linux/slab.h>
11#include <linux/types.h>
12#include <linux/errno.h>
13#include <linux/device.h>
14#include <linux/firmware.h>
15#include <linux/usb.h>
16#include <asm/unaligned.h>
17#include <net/bluetooth/bluetooth.h>
18
19#define VERSION "1.0"
20#define ATH3K_FIRMWARE "ath3k-1.fw"
21
22#define ATH3K_DNLOAD 0x01
23#define ATH3K_GETSTATE 0x05
24#define ATH3K_SET_NORMAL_MODE 0x07
25#define ATH3K_GETVERSION 0x09
26#define USB_REG_SWITCH_VID_PID 0x0a
27
28#define ATH3K_MODE_MASK 0x3F
29#define ATH3K_NORMAL_MODE 0x0E
30
31#define ATH3K_PATCH_UPDATE 0x80
32#define ATH3K_SYSCFG_UPDATE 0x40
33
34#define ATH3K_XTAL_FREQ_26M 0x00
35#define ATH3K_XTAL_FREQ_40M 0x01
36#define ATH3K_XTAL_FREQ_19P2 0x02
37#define ATH3K_NAME_LEN 0xFF
38
39struct ath3k_version {
40 __le32 rom_version;
41 __le32 build_version;
42 __le32 ram_version;
43 __u8 ref_clock;
44 __u8 reserved[7];
45} __packed;
46
47static const struct usb_device_id ath3k_table[] = {
48
49 { USB_DEVICE(0x0CF3, 0x3000) },
50
51
52 { USB_DEVICE(0x0489, 0xE027) },
53 { USB_DEVICE(0x0489, 0xE03D) },
54 { USB_DEVICE(0x04F2, 0xAFF1) },
55 { USB_DEVICE(0x0930, 0x0215) },
56 { USB_DEVICE(0x0CF3, 0x3002) },
57 { USB_DEVICE(0x0CF3, 0xE019) },
58 { USB_DEVICE(0x13d3, 0x3304) },
59
60
61 { USB_DEVICE(0x03F0, 0x311D) },
62
63
64 { USB_DEVICE(0x0489, 0xe04d) },
65 { USB_DEVICE(0x0489, 0xe04e) },
66 { USB_DEVICE(0x0489, 0xe057) },
67 { USB_DEVICE(0x0489, 0xe056) },
68 { USB_DEVICE(0x0489, 0xe05f) },
69 { USB_DEVICE(0x0489, 0xe076) },
70 { USB_DEVICE(0x0489, 0xe078) },
71 { USB_DEVICE(0x0489, 0xe095) },
72 { USB_DEVICE(0x04c5, 0x1330) },
73 { USB_DEVICE(0x04CA, 0x3004) },
74 { USB_DEVICE(0x04CA, 0x3005) },
75 { USB_DEVICE(0x04CA, 0x3006) },
76 { USB_DEVICE(0x04CA, 0x3007) },
77 { USB_DEVICE(0x04CA, 0x3008) },
78 { USB_DEVICE(0x04CA, 0x300b) },
79 { USB_DEVICE(0x04CA, 0x300d) },
80 { USB_DEVICE(0x04CA, 0x300f) },
81 { USB_DEVICE(0x04CA, 0x3010) },
82 { USB_DEVICE(0x04CA, 0x3014) },
83 { USB_DEVICE(0x04CA, 0x3018) },
84 { USB_DEVICE(0x0930, 0x0219) },
85 { USB_DEVICE(0x0930, 0x021c) },
86 { USB_DEVICE(0x0930, 0x0220) },
87 { USB_DEVICE(0x0930, 0x0227) },
88 { USB_DEVICE(0x0b05, 0x17d0) },
89 { USB_DEVICE(0x0CF3, 0x0036) },
90 { USB_DEVICE(0x0CF3, 0x3004) },
91 { USB_DEVICE(0x0CF3, 0x3008) },
92 { USB_DEVICE(0x0CF3, 0x311D) },
93 { USB_DEVICE(0x0CF3, 0x311E) },
94 { USB_DEVICE(0x0CF3, 0x311F) },
95 { USB_DEVICE(0x0cf3, 0x3121) },
96 { USB_DEVICE(0x0CF3, 0x817a) },
97 { USB_DEVICE(0x0CF3, 0x817b) },
98 { USB_DEVICE(0x0cf3, 0xe003) },
99 { USB_DEVICE(0x0CF3, 0xE004) },
100 { USB_DEVICE(0x0CF3, 0xE005) },
101 { USB_DEVICE(0x0CF3, 0xE006) },
102 { USB_DEVICE(0x13d3, 0x3362) },
103 { USB_DEVICE(0x13d3, 0x3375) },
104 { USB_DEVICE(0x13d3, 0x3393) },
105 { USB_DEVICE(0x13d3, 0x3395) },
106 { USB_DEVICE(0x13d3, 0x3402) },
107 { USB_DEVICE(0x13d3, 0x3408) },
108 { USB_DEVICE(0x13d3, 0x3423) },
109 { USB_DEVICE(0x13d3, 0x3432) },
110 { USB_DEVICE(0x13d3, 0x3472) },
111 { USB_DEVICE(0x13d3, 0x3474) },
112 { USB_DEVICE(0x13d3, 0x3487) },
113 { USB_DEVICE(0x13d3, 0x3490) },
114
115
116 { USB_DEVICE(0x0489, 0xE02C) },
117
118
119 { USB_DEVICE(0x0489, 0xE036) },
120 { USB_DEVICE(0x0489, 0xE03C) },
121
122 { }
123};
124
125MODULE_DEVICE_TABLE(usb, ath3k_table);
126
127#define BTUSB_ATH3012 0x80
128
129
130
131static const struct usb_device_id ath3k_blist_tbl[] = {
132
133
134 { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
135 { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
136 { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
137 { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
138 { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
139 { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
140 { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
141 { USB_DEVICE(0x0489, 0xe095), .driver_info = BTUSB_ATH3012 },
142 { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
143 { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
144 { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
145 { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
146 { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
147 { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
148 { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
149 { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
150 { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
151 { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
152 { USB_DEVICE(0x04ca, 0x3014), .driver_info = BTUSB_ATH3012 },
153 { USB_DEVICE(0x04ca, 0x3018), .driver_info = BTUSB_ATH3012 },
154 { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
155 { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
156 { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
157 { USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
158 { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
159 { USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
160 { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
161 { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
162 { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
163 { USB_DEVICE(0x0cf3, 0x311E), .driver_info = BTUSB_ATH3012 },
164 { USB_DEVICE(0x0cf3, 0x311F), .driver_info = BTUSB_ATH3012 },
165 { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
166 { USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
167 { USB_DEVICE(0x0CF3, 0x817b), .driver_info = BTUSB_ATH3012 },
168 { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
169 { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
170 { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
171 { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
172 { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
173 { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
174 { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
175 { USB_DEVICE(0x13d3, 0x3395), .driver_info = BTUSB_ATH3012 },
176 { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
177 { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
178 { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
179 { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
180 { USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 },
181 { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
182 { USB_DEVICE(0x13d3, 0x3487), .driver_info = BTUSB_ATH3012 },
183 { USB_DEVICE(0x13d3, 0x3490), .driver_info = BTUSB_ATH3012 },
184
185
186 { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
187 { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
188
189 { }
190};
191
192static inline void ath3k_log_failed_loading(int err, int len, int size,
193 int count)
194{
195 BT_ERR("Firmware loading err = %d, len = %d, size = %d, count = %d",
196 err, len, size, count);
197}
198
199#define USB_REQ_DFU_DNLOAD 1
200#define BULK_SIZE 4096
201#define FW_HDR_SIZE 20
202#define TIMEGAP_USEC_MIN 50
203#define TIMEGAP_USEC_MAX 100
204
205static int ath3k_load_firmware(struct usb_device *udev,
206 const struct firmware *firmware)
207{
208 u8 *send_buf;
209 int len = 0;
210 int err, pipe, size, sent = 0;
211 int count = firmware->size;
212
213 BT_DBG("udev %p", udev);
214
215 send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
216 if (!send_buf) {
217 BT_ERR("Can't allocate memory chunk for firmware");
218 return -ENOMEM;
219 }
220
221 err = usb_control_msg_send(udev, 0, USB_REQ_DFU_DNLOAD, USB_TYPE_VENDOR,
222 0, 0, firmware->data, FW_HDR_SIZE,
223 USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
224 if (err) {
225 BT_ERR("Can't change to loading configuration err");
226 goto error;
227 }
228 sent += FW_HDR_SIZE;
229 count -= FW_HDR_SIZE;
230
231 pipe = usb_sndbulkpipe(udev, 0x02);
232
233 while (count) {
234
235 usleep_range(TIMEGAP_USEC_MIN, TIMEGAP_USEC_MAX);
236
237 size = min_t(uint, count, BULK_SIZE);
238 memcpy(send_buf, firmware->data + sent, size);
239
240 err = usb_bulk_msg(udev, pipe, send_buf, size,
241 &len, 3000);
242
243 if (err || (len != size)) {
244 ath3k_log_failed_loading(err, len, size, count);
245 goto error;
246 }
247
248 sent += size;
249 count -= size;
250 }
251
252error:
253 kfree(send_buf);
254 return err;
255}
256
257static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
258{
259 return usb_control_msg_recv(udev, 0, ATH3K_GETSTATE,
260 USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
261 state, 1, USB_CTRL_SET_TIMEOUT,
262 GFP_KERNEL);
263}
264
265static int ath3k_get_version(struct usb_device *udev,
266 struct ath3k_version *version)
267{
268 return usb_control_msg_recv(udev, 0, ATH3K_GETVERSION,
269 USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
270 version, sizeof(*version), USB_CTRL_SET_TIMEOUT,
271 GFP_KERNEL);
272}
273
274static int ath3k_load_fwfile(struct usb_device *udev,
275 const struct firmware *firmware)
276{
277 u8 *send_buf;
278 int len = 0;
279 int err, pipe, size, count, sent = 0;
280 int ret;
281
282 count = firmware->size;
283
284 send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
285 if (!send_buf) {
286 BT_ERR("Can't allocate memory chunk for firmware");
287 return -ENOMEM;
288 }
289
290 size = min_t(uint, count, FW_HDR_SIZE);
291
292 ret = usb_control_msg_send(udev, 0, ATH3K_DNLOAD, USB_TYPE_VENDOR, 0, 0,
293 firmware->data, size, USB_CTRL_SET_TIMEOUT,
294 GFP_KERNEL);
295 if (ret) {
296 BT_ERR("Can't change to loading configuration err");
297 kfree(send_buf);
298 return ret;
299 }
300
301 sent += size;
302 count -= size;
303
304 pipe = usb_sndbulkpipe(udev, 0x02);
305
306 while (count) {
307
308 usleep_range(TIMEGAP_USEC_MIN, TIMEGAP_USEC_MAX);
309
310 size = min_t(uint, count, BULK_SIZE);
311 memcpy(send_buf, firmware->data + sent, size);
312
313 err = usb_bulk_msg(udev, pipe, send_buf, size,
314 &len, 3000);
315 if (err || (len != size)) {
316 ath3k_log_failed_loading(err, len, size, count);
317 kfree(send_buf);
318 return err;
319 }
320 sent += size;
321 count -= size;
322 }
323
324 kfree(send_buf);
325 return 0;
326}
327
328static void ath3k_switch_pid(struct usb_device *udev)
329{
330 usb_control_msg_send(udev, 0, USB_REG_SWITCH_VID_PID, USB_TYPE_VENDOR,
331 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
332}
333
334static int ath3k_set_normal_mode(struct usb_device *udev)
335{
336 unsigned char fw_state;
337 int ret;
338
339 ret = ath3k_get_state(udev, &fw_state);
340 if (ret) {
341 BT_ERR("Can't get state to change to normal mode err");
342 return ret;
343 }
344
345 if ((fw_state & ATH3K_MODE_MASK) == ATH3K_NORMAL_MODE) {
346 BT_DBG("firmware was already in normal mode");
347 return 0;
348 }
349
350 return usb_control_msg_send(udev, 0, ATH3K_SET_NORMAL_MODE,
351 USB_TYPE_VENDOR, 0, 0, NULL, 0,
352 USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
353}
354
355static int ath3k_load_patch(struct usb_device *udev)
356{
357 unsigned char fw_state;
358 char filename[ATH3K_NAME_LEN];
359 const struct firmware *firmware;
360 struct ath3k_version fw_version;
361 __u32 pt_rom_version, pt_build_version;
362 int ret;
363
364 ret = ath3k_get_state(udev, &fw_state);
365 if (ret) {
366 BT_ERR("Can't get state to change to load ram patch err");
367 return ret;
368 }
369
370 if (fw_state & ATH3K_PATCH_UPDATE) {
371 BT_DBG("Patch was already downloaded");
372 return 0;
373 }
374
375 ret = ath3k_get_version(udev, &fw_version);
376 if (ret) {
377 BT_ERR("Can't get version to change to load ram patch err");
378 return ret;
379 }
380
381 snprintf(filename, ATH3K_NAME_LEN, "ar3k/AthrBT_0x%08x.dfu",
382 le32_to_cpu(fw_version.rom_version));
383
384 ret = request_firmware(&firmware, filename, &udev->dev);
385 if (ret < 0) {
386 BT_ERR("Patch file not found %s", filename);
387 return ret;
388 }
389
390 pt_rom_version = get_unaligned_le32(firmware->data +
391 firmware->size - 8);
392 pt_build_version = get_unaligned_le32(firmware->data +
393 firmware->size - 4);
394
395 if (pt_rom_version != le32_to_cpu(fw_version.rom_version) ||
396 pt_build_version <= le32_to_cpu(fw_version.build_version)) {
397 BT_ERR("Patch file version did not match with firmware");
398 release_firmware(firmware);
399 return -EINVAL;
400 }
401
402 ret = ath3k_load_fwfile(udev, firmware);
403 release_firmware(firmware);
404
405 return ret;
406}
407
408static int ath3k_load_syscfg(struct usb_device *udev)
409{
410 unsigned char fw_state;
411 char filename[ATH3K_NAME_LEN];
412 const struct firmware *firmware;
413 struct ath3k_version fw_version;
414 int clk_value, ret;
415
416 ret = ath3k_get_state(udev, &fw_state);
417 if (ret) {
418 BT_ERR("Can't get state to change to load configuration err");
419 return -EBUSY;
420 }
421
422 ret = ath3k_get_version(udev, &fw_version);
423 if (ret) {
424 BT_ERR("Can't get version to change to load ram patch err");
425 return ret;
426 }
427
428 switch (fw_version.ref_clock) {
429
430 case ATH3K_XTAL_FREQ_26M:
431 clk_value = 26;
432 break;
433 case ATH3K_XTAL_FREQ_40M:
434 clk_value = 40;
435 break;
436 case ATH3K_XTAL_FREQ_19P2:
437 clk_value = 19;
438 break;
439 default:
440 clk_value = 0;
441 break;
442 }
443
444 snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
445 le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");
446
447 ret = request_firmware(&firmware, filename, &udev->dev);
448 if (ret < 0) {
449 BT_ERR("Configuration file not found %s", filename);
450 return ret;
451 }
452
453 ret = ath3k_load_fwfile(udev, firmware);
454 release_firmware(firmware);
455
456 return ret;
457}
458
459static int ath3k_probe(struct usb_interface *intf,
460 const struct usb_device_id *id)
461{
462 const struct firmware *firmware;
463 struct usb_device *udev = interface_to_usbdev(intf);
464 int ret;
465
466 BT_DBG("intf %p id %p", intf, id);
467
468 if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
469 return -ENODEV;
470
471
472 if (!id->driver_info) {
473 const struct usb_device_id *match;
474
475 match = usb_match_id(intf, ath3k_blist_tbl);
476 if (match)
477 id = match;
478 }
479
480
481 if (id->driver_info & BTUSB_ATH3012) {
482
483 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001)
484 return -ENODEV;
485
486 ret = ath3k_load_patch(udev);
487 if (ret < 0) {
488 BT_ERR("Loading patch file failed");
489 return ret;
490 }
491 ret = ath3k_load_syscfg(udev);
492 if (ret < 0) {
493 BT_ERR("Loading sysconfig file failed");
494 return ret;
495 }
496 ret = ath3k_set_normal_mode(udev);
497 if (ret) {
498 BT_ERR("Set normal mode failed");
499 return ret;
500 }
501 ath3k_switch_pid(udev);
502 return 0;
503 }
504
505 ret = request_firmware(&firmware, ATH3K_FIRMWARE, &udev->dev);
506 if (ret < 0) {
507 if (ret == -ENOENT)
508 BT_ERR("Firmware file \"%s\" not found",
509 ATH3K_FIRMWARE);
510 else
511 BT_ERR("Firmware file \"%s\" request failed (err=%d)",
512 ATH3K_FIRMWARE, ret);
513 return ret;
514 }
515
516 ret = ath3k_load_firmware(udev, firmware);
517 release_firmware(firmware);
518
519 return ret;
520}
521
522static void ath3k_disconnect(struct usb_interface *intf)
523{
524 BT_DBG("%s intf %p", __func__, intf);
525}
526
527static struct usb_driver ath3k_driver = {
528 .name = "ath3k",
529 .probe = ath3k_probe,
530 .disconnect = ath3k_disconnect,
531 .id_table = ath3k_table,
532 .disable_hub_initiated_lpm = 1,
533};
534
535module_usb_driver(ath3k_driver);
536
537MODULE_AUTHOR("Atheros Communications");
538MODULE_DESCRIPTION("Atheros AR30xx firmware driver");
539MODULE_VERSION(VERSION);
540MODULE_LICENSE("GPL");
541MODULE_FIRMWARE(ATH3K_FIRMWARE);
542
