1
2
3
4
5
6#include <linux/clk.h>
7#include <linux/cpu.h>
8#include <linux/cpufreq.h>
9#include <linux/err.h>
10#include <linux/module.h>
11#include <linux/nvmem-consumer.h>
12#include <linux/of.h>
13#include <linux/of_address.h>
14#include <linux/pm_opp.h>
15#include <linux/platform_device.h>
16#include <linux/regulator/consumer.h>
17
18#define PU_SOC_VOLTAGE_NORMAL 1250000
19#define PU_SOC_VOLTAGE_HIGH 1275000
20#define FREQ_1P2_GHZ 1200000000
21
22static struct regulator *arm_reg;
23static struct regulator *pu_reg;
24static struct regulator *soc_reg;
25
26enum IMX6_CPUFREQ_CLKS {
27 ARM,
28 PLL1_SYS,
29 STEP,
30 PLL1_SW,
31 PLL2_PFD2_396M,
32
33 PLL2_BUS,
34 SECONDARY_SEL,
35};
36#define IMX6Q_CPUFREQ_CLK_NUM 5
37#define IMX6UL_CPUFREQ_CLK_NUM 7
38
39static int num_clks;
40static struct clk_bulk_data clks[] = {
41 { .id = "arm" },
42 { .id = "pll1_sys" },
43 { .id = "step" },
44 { .id = "pll1_sw" },
45 { .id = "pll2_pfd2_396m" },
46 { .id = "pll2_bus" },
47 { .id = "secondary_sel" },
48};
49
50static struct device *cpu_dev;
51static struct cpufreq_frequency_table *freq_table;
52static unsigned int max_freq;
53static unsigned int transition_latency;
54
55static u32 *imx6_soc_volt;
56static u32 soc_opp_count;
57
58static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
59{
60 struct dev_pm_opp *opp;
61 unsigned long freq_hz, volt, volt_old;
62 unsigned int old_freq, new_freq;
63 bool pll1_sys_temp_enabled = false;
64 int ret;
65
66 new_freq = freq_table[index].frequency;
67 freq_hz = new_freq * 1000;
68 old_freq = clk_get_rate(clks[ARM].clk) / 1000;
69
70 opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz);
71 if (IS_ERR(opp)) {
72 dev_err(cpu_dev, "failed to find OPP for %ld\n", freq_hz);
73 return PTR_ERR(opp);
74 }
75
76 volt = dev_pm_opp_get_voltage(opp);
77 dev_pm_opp_put(opp);
78
79 volt_old = regulator_get_voltage(arm_reg);
80
81 dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n",
82 old_freq / 1000, volt_old / 1000,
83 new_freq / 1000, volt / 1000);
84
85
86 if (new_freq > old_freq) {
87 if (!IS_ERR(pu_reg)) {
88 ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0);
89 if (ret) {
90 dev_err(cpu_dev, "failed to scale vddpu up: %d\n", ret);
91 return ret;
92 }
93 }
94 ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0);
95 if (ret) {
96 dev_err(cpu_dev, "failed to scale vddsoc up: %d\n", ret);
97 return ret;
98 }
99 ret = regulator_set_voltage_tol(arm_reg, volt, 0);
100 if (ret) {
101 dev_err(cpu_dev,
102 "failed to scale vddarm up: %d\n", ret);
103 return ret;
104 }
105 }
106
107
108
109
110
111
112
113
114
115
116
117
118 if (of_machine_is_compatible("fsl,imx6ul") ||
119 of_machine_is_compatible("fsl,imx6ull")) {
120
121
122
123
124
125
126
127 clk_set_rate(clks[ARM].clk, (old_freq >> 1) * 1000);
128 clk_set_parent(clks[PLL1_SW].clk, clks[PLL1_SYS].clk);
129 if (freq_hz > clk_get_rate(clks[PLL2_PFD2_396M].clk))
130 clk_set_parent(clks[SECONDARY_SEL].clk,
131 clks[PLL2_BUS].clk);
132 else
133 clk_set_parent(clks[SECONDARY_SEL].clk,
134 clks[PLL2_PFD2_396M].clk);
135 clk_set_parent(clks[STEP].clk, clks[SECONDARY_SEL].clk);
136 clk_set_parent(clks[PLL1_SW].clk, clks[STEP].clk);
137 if (freq_hz > clk_get_rate(clks[PLL2_BUS].clk)) {
138 clk_set_rate(clks[PLL1_SYS].clk, new_freq * 1000);
139 clk_set_parent(clks[PLL1_SW].clk, clks[PLL1_SYS].clk);
140 }
141 } else {
142 clk_set_parent(clks[STEP].clk, clks[PLL2_PFD2_396M].clk);
143 clk_set_parent(clks[PLL1_SW].clk, clks[STEP].clk);
144 if (freq_hz > clk_get_rate(clks[PLL2_PFD2_396M].clk)) {
145 clk_set_rate(clks[PLL1_SYS].clk, new_freq * 1000);
146 clk_set_parent(clks[PLL1_SW].clk, clks[PLL1_SYS].clk);
147 } else {
148
149 pll1_sys_temp_enabled = true;
150 clk_prepare_enable(clks[PLL1_SYS].clk);
151 }
152 }
153
154
155 ret = clk_set_rate(clks[ARM].clk, new_freq * 1000);
156 if (ret) {
157 int ret1;
158
159 dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
160 ret1 = regulator_set_voltage_tol(arm_reg, volt_old, 0);
161 if (ret1)
162 dev_warn(cpu_dev,
163 "failed to restore vddarm voltage: %d\n", ret1);
164 return ret;
165 }
166
167
168 if (pll1_sys_temp_enabled)
169 clk_disable_unprepare(clks[PLL1_SYS].clk);
170
171
172 if (new_freq < old_freq) {
173 ret = regulator_set_voltage_tol(arm_reg, volt, 0);
174 if (ret)
175 dev_warn(cpu_dev,
176 "failed to scale vddarm down: %d\n", ret);
177 ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0);
178 if (ret)
179 dev_warn(cpu_dev, "failed to scale vddsoc down: %d\n", ret);
180 if (!IS_ERR(pu_reg)) {
181 ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0);
182 if (ret)
183 dev_warn(cpu_dev, "failed to scale vddpu down: %d\n", ret);
184 }
185 }
186
187 return 0;
188}
189
190static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
191{
192 policy->clk = clks[ARM].clk;
193 cpufreq_generic_init(policy, freq_table, transition_latency);
194 policy->suspend_freq = max_freq;
195 dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
196
197 return 0;
198}
199
200static struct cpufreq_driver imx6q_cpufreq_driver = {
201 .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK |
202 CPUFREQ_IS_COOLING_DEV,
203 .verify = cpufreq_generic_frequency_table_verify,
204 .target_index = imx6q_set_target,
205 .get = cpufreq_generic_get,
206 .init = imx6q_cpufreq_init,
207 .name = "imx6q-cpufreq",
208 .attr = cpufreq_generic_attr,
209 .suspend = cpufreq_generic_suspend,
210};
211
212#define OCOTP_CFG3 0x440
213#define OCOTP_CFG3_SPEED_SHIFT 16
214#define OCOTP_CFG3_SPEED_1P2GHZ 0x3
215#define OCOTP_CFG3_SPEED_996MHZ 0x2
216#define OCOTP_CFG3_SPEED_852MHZ 0x1
217
218static int imx6q_opp_check_speed_grading(struct device *dev)
219{
220 struct device_node *np;
221 void __iomem *base;
222 u32 val;
223 int ret;
224
225 if (of_find_property(dev->of_node, "nvmem-cells", NULL)) {
226 ret = nvmem_cell_read_u32(dev, "speed_grade", &val);
227 if (ret)
228 return ret;
229 } else {
230 np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ocotp");
231 if (!np)
232 return -ENOENT;
233
234 base = of_iomap(np, 0);
235 of_node_put(np);
236 if (!base) {
237 dev_err(dev, "failed to map ocotp\n");
238 return -EFAULT;
239 }
240
241
242
243
244
245
246
247
248
249 val = readl_relaxed(base + OCOTP_CFG3);
250 iounmap(base);
251 }
252
253 val >>= OCOTP_CFG3_SPEED_SHIFT;
254 val &= 0x3;
255
256 if (val < OCOTP_CFG3_SPEED_996MHZ)
257 if (dev_pm_opp_disable(dev, 996000000))
258 dev_warn(dev, "failed to disable 996MHz OPP\n");
259
260 if (of_machine_is_compatible("fsl,imx6q") ||
261 of_machine_is_compatible("fsl,imx6qp")) {
262 if (val != OCOTP_CFG3_SPEED_852MHZ)
263 if (dev_pm_opp_disable(dev, 852000000))
264 dev_warn(dev, "failed to disable 852MHz OPP\n");
265 if (val != OCOTP_CFG3_SPEED_1P2GHZ)
266 if (dev_pm_opp_disable(dev, 1200000000))
267 dev_warn(dev, "failed to disable 1.2GHz OPP\n");
268 }
269
270 return 0;
271}
272
273#define OCOTP_CFG3_6UL_SPEED_696MHZ 0x2
274#define OCOTP_CFG3_6ULL_SPEED_792MHZ 0x2
275#define OCOTP_CFG3_6ULL_SPEED_900MHZ 0x3
276
277static int imx6ul_opp_check_speed_grading(struct device *dev)
278{
279 u32 val;
280 int ret = 0;
281
282 if (of_find_property(dev->of_node, "nvmem-cells", NULL)) {
283 ret = nvmem_cell_read_u32(dev, "speed_grade", &val);
284 if (ret)
285 return ret;
286 } else {
287 struct device_node *np;
288 void __iomem *base;
289
290 np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-ocotp");
291 if (!np)
292 np = of_find_compatible_node(NULL, NULL,
293 "fsl,imx6ull-ocotp");
294 if (!np)
295 return -ENOENT;
296
297 base = of_iomap(np, 0);
298 of_node_put(np);
299 if (!base) {
300 dev_err(dev, "failed to map ocotp\n");
301 return -EFAULT;
302 }
303
304 val = readl_relaxed(base + OCOTP_CFG3);
305 iounmap(base);
306 }
307
308
309
310
311
312
313
314
315
316 val >>= OCOTP_CFG3_SPEED_SHIFT;
317 val &= 0x3;
318
319 if (of_machine_is_compatible("fsl,imx6ul")) {
320 if (val != OCOTP_CFG3_6UL_SPEED_696MHZ)
321 if (dev_pm_opp_disable(dev, 696000000))
322 dev_warn(dev, "failed to disable 696MHz OPP\n");
323 }
324
325 if (of_machine_is_compatible("fsl,imx6ull")) {
326 if (val != OCOTP_CFG3_6ULL_SPEED_792MHZ)
327 if (dev_pm_opp_disable(dev, 792000000))
328 dev_warn(dev, "failed to disable 792MHz OPP\n");
329
330 if (val != OCOTP_CFG3_6ULL_SPEED_900MHZ)
331 if (dev_pm_opp_disable(dev, 900000000))
332 dev_warn(dev, "failed to disable 900MHz OPP\n");
333 }
334
335 return ret;
336}
337
338static int imx6q_cpufreq_probe(struct platform_device *pdev)
339{
340 struct device_node *np;
341 struct dev_pm_opp *opp;
342 unsigned long min_volt, max_volt;
343 int num, ret;
344 const struct property *prop;
345 const __be32 *val;
346 u32 nr, i, j;
347
348 cpu_dev = get_cpu_device(0);
349 if (!cpu_dev) {
350 pr_err("failed to get cpu0 device\n");
351 return -ENODEV;
352 }
353
354 np = of_node_get(cpu_dev->of_node);
355 if (!np) {
356 dev_err(cpu_dev, "failed to find cpu0 node\n");
357 return -ENOENT;
358 }
359
360 if (of_machine_is_compatible("fsl,imx6ul") ||
361 of_machine_is_compatible("fsl,imx6ull"))
362 num_clks = IMX6UL_CPUFREQ_CLK_NUM;
363 else
364 num_clks = IMX6Q_CPUFREQ_CLK_NUM;
365
366 ret = clk_bulk_get(cpu_dev, num_clks, clks);
367 if (ret)
368 goto put_node;
369
370 arm_reg = regulator_get(cpu_dev, "arm");
371 pu_reg = regulator_get_optional(cpu_dev, "pu");
372 soc_reg = regulator_get(cpu_dev, "soc");
373 if (PTR_ERR(arm_reg) == -EPROBE_DEFER ||
374 PTR_ERR(soc_reg) == -EPROBE_DEFER ||
375 PTR_ERR(pu_reg) == -EPROBE_DEFER) {
376 ret = -EPROBE_DEFER;
377 dev_dbg(cpu_dev, "regulators not ready, defer\n");
378 goto put_reg;
379 }
380 if (IS_ERR(arm_reg) || IS_ERR(soc_reg)) {
381 dev_err(cpu_dev, "failed to get regulators\n");
382 ret = -ENOENT;
383 goto put_reg;
384 }
385
386 ret = dev_pm_opp_of_add_table(cpu_dev);
387 if (ret < 0) {
388 dev_err(cpu_dev, "failed to init OPP table: %d\n", ret);
389 goto put_reg;
390 }
391
392 if (of_machine_is_compatible("fsl,imx6ul") ||
393 of_machine_is_compatible("fsl,imx6ull")) {
394 ret = imx6ul_opp_check_speed_grading(cpu_dev);
395 } else {
396 ret = imx6q_opp_check_speed_grading(cpu_dev);
397 }
398 if (ret) {
399 if (ret != -EPROBE_DEFER)
400 dev_err(cpu_dev, "failed to read ocotp: %d\n",
401 ret);
402 goto out_free_opp;
403 }
404
405 num = dev_pm_opp_get_opp_count(cpu_dev);
406 if (num < 0) {
407 ret = num;
408 dev_err(cpu_dev, "no OPP table is found: %d\n", ret);
409 goto out_free_opp;
410 }
411
412 ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
413 if (ret) {
414 dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
415 goto out_free_opp;
416 }
417
418
419 imx6_soc_volt = devm_kcalloc(cpu_dev, num, sizeof(*imx6_soc_volt),
420 GFP_KERNEL);
421 if (imx6_soc_volt == NULL) {
422 ret = -ENOMEM;
423 goto free_freq_table;
424 }
425
426 prop = of_find_property(np, "fsl,soc-operating-points", NULL);
427 if (!prop || !prop->value)
428 goto soc_opp_out;
429
430
431
432
433
434 nr = prop->length / sizeof(u32);
435 if (nr % 2 || (nr / 2) < num)
436 goto soc_opp_out;
437
438 for (j = 0; j < num; j++) {
439 val = prop->value;
440 for (i = 0; i < nr / 2; i++) {
441 unsigned long freq = be32_to_cpup(val++);
442 unsigned long volt = be32_to_cpup(val++);
443 if (freq_table[j].frequency == freq) {
444 imx6_soc_volt[soc_opp_count++] = volt;
445 break;
446 }
447 }
448 }
449
450soc_opp_out:
451
452 if (soc_opp_count != num) {
453 dev_warn(cpu_dev, "can NOT find valid fsl,soc-operating-points property in dtb, use default value!\n");
454 for (j = 0; j < num; j++)
455 imx6_soc_volt[j] = PU_SOC_VOLTAGE_NORMAL;
456 if (freq_table[num - 1].frequency * 1000 == FREQ_1P2_GHZ)
457 imx6_soc_volt[num - 1] = PU_SOC_VOLTAGE_HIGH;
458 }
459
460 if (of_property_read_u32(np, "clock-latency", &transition_latency))
461 transition_latency = CPUFREQ_ETERNAL;
462
463
464
465
466
467 ret = regulator_set_voltage_time(soc_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]);
468 if (ret > 0)
469 transition_latency += ret * 1000;
470 if (!IS_ERR(pu_reg)) {
471 ret = regulator_set_voltage_time(pu_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]);
472 if (ret > 0)
473 transition_latency += ret * 1000;
474 }
475
476
477
478
479
480
481 max_freq = freq_table[--num].frequency;
482 opp = dev_pm_opp_find_freq_exact(cpu_dev,
483 freq_table[0].frequency * 1000, true);
484 min_volt = dev_pm_opp_get_voltage(opp);
485 dev_pm_opp_put(opp);
486 opp = dev_pm_opp_find_freq_exact(cpu_dev, max_freq * 1000, true);
487 max_volt = dev_pm_opp_get_voltage(opp);
488 dev_pm_opp_put(opp);
489
490 ret = regulator_set_voltage_time(arm_reg, min_volt, max_volt);
491 if (ret > 0)
492 transition_latency += ret * 1000;
493
494 ret = cpufreq_register_driver(&imx6q_cpufreq_driver);
495 if (ret) {
496 dev_err(cpu_dev, "failed register driver: %d\n", ret);
497 goto free_freq_table;
498 }
499
500 of_node_put(np);
501 return 0;
502
503free_freq_table:
504 dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
505out_free_opp:
506 dev_pm_opp_of_remove_table(cpu_dev);
507put_reg:
508 if (!IS_ERR(arm_reg))
509 regulator_put(arm_reg);
510 if (!IS_ERR(pu_reg))
511 regulator_put(pu_reg);
512 if (!IS_ERR(soc_reg))
513 regulator_put(soc_reg);
514
515 clk_bulk_put(num_clks, clks);
516put_node:
517 of_node_put(np);
518
519 return ret;
520}
521
522static int imx6q_cpufreq_remove(struct platform_device *pdev)
523{
524 cpufreq_unregister_driver(&imx6q_cpufreq_driver);
525 dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
526 dev_pm_opp_of_remove_table(cpu_dev);
527 regulator_put(arm_reg);
528 if (!IS_ERR(pu_reg))
529 regulator_put(pu_reg);
530 regulator_put(soc_reg);
531
532 clk_bulk_put(num_clks, clks);
533
534 return 0;
535}
536
537static struct platform_driver imx6q_cpufreq_platdrv = {
538 .driver = {
539 .name = "imx6q-cpufreq",
540 },
541 .probe = imx6q_cpufreq_probe,
542 .remove = imx6q_cpufreq_remove,
543};
544module_platform_driver(imx6q_cpufreq_platdrv);
545
546MODULE_ALIAS("platform:imx6q-cpufreq");
547MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
548MODULE_DESCRIPTION("Freescale i.MX6Q cpufreq driver");
549MODULE_LICENSE("GPL");
550
