/*
 * Copyright (c) 2006-2008 Intel Corporation
 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
 *
 * DRM core CRTC related functions
 *
 * Permission to use, copy, modify, distribute, and sell this software and its
 * documentation for any purpose is hereby granted without fee, provided that
 * the above copyright notice appear in all copies and that both that copyright
 * notice and this permission notice appear in supporting documentation, and
 * that the name of the copyright holders not be used in advertising or
 * publicity pertaining to distribution of the software without specific,
 * written prior permission.  The copyright holders make no representations
 * about the suitability of this software for any purpose.  It is provided "as
 * is" without express or implied warranty.
 *
 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
 * OF THIS SOFTWARE.
 *
 * Authors:
 *      Keith Packard
 *      Eric Anholt <eric@anholt.net>
 *      Dave Airlie <airlied@linux.ie>
 *      Jesse Barnes <jesse.barnes@intel.com>
 */

#include <linux/export.h>
#include <linux/moduleparam.h>

#include <drm/drm_bridge.h>
#include <drm/drm_client.h>
#include <drm/drm_crtc.h>
#include <drm/drm_edid.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_modeset_helper_vtables.h>
#include <drm/drm_print.h>
#include <drm/drm_probe_helper.h>
#include <drm/drm_sysfs.h>

#include "drm_crtc_helper_internal.h"

/**
 * DOC: output probing helper overview
 *
 * This library provides some helper code for output probing. It provides an
 * implementation of the core &drm_connector_funcs.fill_modes interface with
 * drm_helper_probe_single_connector_modes().
 *
 * It also provides support for polling connectors with a work item and for
 * generic hotplug interrupt handling where the driver doesn't or cannot keep
 * track of a per-connector hpd interrupt.
 *
 * This helper library can be used independently of the modeset helper library.
 * Drivers can also overwrite different parts e.g. use their own hotplug
 * handling code to avoid probing unrelated outputs.
 *
 * The probe helpers share the function table structures with other display
 * helper libraries. See &struct drm_connector_helper_funcs for the details.
 */

static bool drm_kms_helper_poll = true;
module_param_named(poll, drm_kms_helper_poll, bool, 0600);

static enum drm_mode_status
drm_mode_validate_flag(const struct drm_display_mode *mode,
                       int flags)
{
        if ((mode->flags & DRM_MODE_FLAG_INTERLACE) &&
            !(flags & DRM_MODE_FLAG_INTERLACE))
                return MODE_NO_INTERLACE;

        if ((mode->flags & DRM_MODE_FLAG_DBLSCAN) &&
            !(flags & DRM_MODE_FLAG_DBLSCAN))
                return MODE_NO_DBLESCAN;

        if ((mode->flags & DRM_MODE_FLAG_3D_MASK) &&
            !(flags & DRM_MODE_FLAG_3D_MASK))
                return MODE_NO_STEREO;

        return MODE_OK;
}

static int
drm_mode_validate_pipeline(struct drm_display_mode *mode,
                           struct drm_connector *connector,
                           struct drm_modeset_acquire_ctx *ctx,
                           enum drm_mode_status *status)
{
        struct drm_device *dev = connector->dev;
        struct drm_encoder *encoder;
        int ret;

        /* Step 1: Validate against connector */
        ret = drm_connector_mode_valid(connector, mode, ctx, status);
        if (ret || *status != MODE_OK)
                return ret;

        /* Step 2: Validate against encoders and crtcs */
        drm_connector_for_each_possible_encoder(connector, encoder) {
                struct drm_bridge *bridge;
                struct drm_crtc *crtc;

                *status = drm_encoder_mode_valid(encoder, mode);
                if (*status != MODE_OK) {
                        /* No point in continuing for crtc check as this encoder
                         * will not accept the mode anyway. If all encoders
                         * reject the mode then, at exit, ret will not be
                         * MODE_OK. */
                        continue;
                }

                bridge = drm_bridge_chain_get_first_bridge(encoder);
                *status = drm_bridge_chain_mode_valid(bridge,
                                                      &connector->display_info,
                                                      mode);
                if (*status != MODE_OK) {
                        /* There is also no point in continuing for crtc check
                         * here. */
                        continue;
                }

                drm_for_each_crtc(crtc, dev) {
                        if (!drm_encoder_crtc_ok(encoder, crtc))
                                continue;

                        *status = drm_crtc_mode_valid(crtc, mode);
                        if (*status == MODE_OK) {
                                /* If we get to this point there is at least
                                 * one combination of encoder+crtc that works
                                 * for this mode. Lets return now. */
                                return 0;
                        }
                }
        }

        return 0;
}

static int drm_helper_probe_add_cmdline_mode(struct drm_connector *connector)
{
        struct drm_cmdline_mode *cmdline_mode;
        struct drm_display_mode *mode;

        cmdline_mode = &connector->cmdline_mode;
        if (!cmdline_mode->specified)
                return 0;

        /* Only add a GTF mode if we find no matching probed modes */
        list_for_each_entry(mode, &connector->probed_modes, head) {
                if (mode->hdisplay != cmdline_mode->xres ||
                    mode->vdisplay != cmdline_mode->yres)
                        continue;

                if (cmdline_mode->refresh_specified) {
                        /* The probed mode's vrefresh is set until later */
                        if (drm_mode_vrefresh(mode) != cmdline_mode->refresh)
                                continue;
                }

                /* Mark the matching mode as being preferred by the user */
                mode->type |= DRM_MODE_TYPE_USERDEF;
                return 0;
        }

        mode = drm_mode_create_from_cmdline_mode(connector->dev,
                                                 cmdline_mode);
        if (mode == NULL)
                return 0;

        drm_mode_probed_add(connector, mode);
        return 1;
}

enum drm_mode_status drm_crtc_mode_valid(struct drm_crtc *crtc,
                                         const struct drm_display_mode *mode)
{
        const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;

        if (!crtc_funcs || !crtc_funcs->mode_valid)
                return MODE_OK;

        return crtc_funcs->mode_valid(crtc, mode);
}

enum drm_mode_status drm_encoder_mode_valid(struct drm_encoder *encoder,
                                            const struct drm_display_mode *mode)
{
        const struct drm_encoder_helper_funcs *encoder_funcs =
                encoder->helper_private;

        if (!encoder_funcs || !encoder_funcs->mode_valid)
                return MODE_OK;

        return encoder_funcs->mode_valid(encoder, mode);
}

int
drm_connector_mode_valid(struct drm_connector *connector,
                         struct drm_display_mode *mode,
                         struct drm_modeset_acquire_ctx *ctx,
                         enum drm_mode_status *status)
{
        const struct drm_connector_helper_funcs *connector_funcs =
                connector->helper_private;
        int ret = 0;

        if (!connector_funcs)
                *status = MODE_OK;
        else if (connector_funcs->mode_valid_ctx)
                ret = connector_funcs->mode_valid_ctx(connector, mode, ctx,
                                                      status);
        else if (connector_funcs->mode_valid)
                *status = connector_funcs->mode_valid(connector, mode);
        else
                *status = MODE_OK;

        return ret;
}

#define DRM_OUTPUT_POLL_PERIOD (10*HZ)
/**
 * drm_kms_helper_poll_enable - re-enable output polling.
 * @dev: drm_device
 *
 * This function re-enables the output polling work, after it has been
 * temporarily disabled using drm_kms_helper_poll_disable(), for example over
 * suspend/resume.
 *
 * Drivers can call this helper from their device resume implementation. It is
 * not an error to call this even when output polling isn't enabled.
 *
 * Note that calls to enable and disable polling must be strictly ordered, which
 * is automatically the case when they're only call from suspend/resume
 * callbacks.
 */
void drm_kms_helper_poll_enable(struct drm_device *dev)
{
        bool poll = false;
        struct drm_connector *connector;
        struct drm_connector_list_iter conn_iter;
        unsigned long delay = DRM_OUTPUT_POLL_PERIOD;

        if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll)
                return;

        drm_connector_list_iter_begin(dev, &conn_iter);
        drm_for_each_connector_iter(connector, &conn_iter) {
                if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT |
                                         DRM_CONNECTOR_POLL_DISCONNECT))
                        poll = true;
        }
        drm_connector_list_iter_end(&conn_iter);

        if (dev->mode_config.delayed_event) {
                /*
                 * FIXME:
                 *
                 * Use short (1s) delay to handle the initial delayed event.
                 * This delay should not be needed, but Optimus/nouveau will
                 * fail in a mysterious way if the delayed event is handled as
                 * soon as possible like it is done in
                 * drm_helper_probe_single_connector_modes() in case the poll
                 * was enabled before.
                 */
                poll = true;
                delay = HZ;
        }

        if (poll)
                schedule_delayed_work(&dev->mode_config.output_poll_work, delay);
}
EXPORT_SYMBOL(drm_kms_helper_poll_enable);

static enum drm_connector_status
drm_helper_probe_detect_ctx(struct drm_connector *connector, bool force)
{
        const struct drm_connector_helper_funcs *funcs = connector->helper_private;
        struct drm_modeset_acquire_ctx ctx;
        int ret;

        drm_modeset_acquire_init(&ctx, 0);

retry:
        ret = drm_modeset_lock(&connector->dev->mode_config.connection_mutex, &ctx);
        if (!ret) {
                if (funcs->detect_ctx)
                        ret = funcs->detect_ctx(connector, &ctx, force);
                else if (connector->funcs->detect)
                        ret = connector->funcs->detect(connector, force);
                else
                        ret = connector_status_connected;
        }

        if (ret == -EDEADLK) {
                drm_modeset_backoff(&ctx);
                goto retry;
        }

        if (WARN_ON(ret < 0))
                ret = connector_status_unknown;

        if (ret != connector->status)
                connector->epoch_counter += 1;

        drm_modeset_drop_locks(&ctx);
        drm_modeset_acquire_fini(&ctx);

        return ret;
}

/**
 * drm_helper_probe_detect - probe connector status
 * @connector: connector to probe
 * @ctx: acquire_ctx, or NULL to let this function handle locking.
 * @force: Whether destructive probe operations should be performed.
 *
 * This function calls the detect callbacks of the connector.
 * This function returns &drm_connector_status, or
 * if @ctx is set, it might also return -EDEADLK.
 */
int
drm_helper_probe_detect(struct drm_connector *connector,
                        struct drm_modeset_acquire_ctx *ctx,
                        bool force)
{
        const struct drm_connector_helper_funcs *funcs = connector->helper_private;
        struct drm_device *dev = connector->dev;
        int ret;

        if (!ctx)
                return drm_helper_probe_detect_ctx(connector, force);

        ret = drm_modeset_lock(&dev->mode_config.connection_mutex, ctx);
        if (ret)
                return ret;

        if (funcs->detect_ctx)
                ret = funcs->detect_ctx(connector, ctx, force);
        else if (connector->funcs->detect)
                ret = connector->funcs->detect(connector, force);
        else
                ret = connector_status_connected;

        if (ret != connector->status)
                connector->epoch_counter += 1;

        return ret;
}
EXPORT_SYMBOL(drm_helper_probe_detect);

/**
 * drm_helper_probe_single_connector_modes - get complete set of display modes
 * @connector: connector to probe
 * @maxX: max width for modes
 * @maxY: max height for modes
 *
 * Based on the helper callbacks implemented by @connector in struct
 * &drm_connector_helper_funcs try to detect all valid modes.  Modes will first
 * be added to the connector's probed_modes list, then culled (based on validity
 * and the @maxX, @maxY parameters) and put into the normal modes list.
 *
 * Intended to be used as a generic implementation of the
 * &drm_connector_funcs.fill_modes() vfunc for drivers that use the CRTC helpers
 * for output mode filtering and detection.
 *
 * The basic procedure is as follows
 *
 * 1. All modes currently on the connector's modes list are marked as stale
 *
 * 2. New modes are added to the connector's probed_modes list with
 *    drm_mode_probed_add(). New modes start their life with status as OK.
 *    Modes are added from a single source using the following priority order.
 *
 *    - &drm_connector_helper_funcs.get_modes vfunc
 *    - if the connector status is connector_status_connected, standard
 *      VESA DMT modes up to 1024x768 are automatically added
 *      (drm_add_modes_noedid())
 *
 *    Finally modes specified via the kernel command line (video=...) are
 *    added in addition to what the earlier probes produced
 *    (drm_helper_probe_add_cmdline_mode()). These modes are generated
 *    using the VESA GTF/CVT formulas.
 *
 * 3. Modes are moved from the probed_modes list to the modes list. Potential
 *    duplicates are merged together (see drm_connector_list_update()).
 *    After this step the probed_modes list will be empty again.
 *
 * 4. Any non-stale mode on the modes list then undergoes validation
 *
 *    - drm_mode_validate_basic() performs basic sanity checks
 *    - drm_mode_validate_size() filters out modes larger than @maxX and @maxY
 *      (if specified)
 *    - drm_mode_validate_flag() checks the modes against basic connector
 *      capabilities (interlace_allowed,doublescan_allowed,stereo_allowed)
 *    - the optional &drm_connector_helper_funcs.mode_valid or
 *      &drm_connector_helper_funcs.mode_valid_ctx helpers can perform driver
 *      and/or sink specific checks
 *    - the optional &drm_crtc_helper_funcs.mode_valid,
 *      &drm_bridge_funcs.mode_valid and &drm_encoder_helper_funcs.mode_valid
 *      helpers can perform driver and/or source specific checks which are also
 *      enforced by the modeset/atomic helpers
 *
 * 5. Any mode whose status is not OK is pruned from the connector's modes list,
 *    accompanied by a debug message indicating the reason for the mode's
 *    rejection (see drm_mode_prune_invalid()).
 *
 * Returns:
 * The number of modes found on @connector.
 */
int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
                                            uint32_t maxX, uint32_t maxY)
{
        struct drm_device *dev = connector->dev;
        struct drm_display_mode *mode;
        const struct drm_connector_helper_funcs *connector_funcs =
                connector->helper_private;
        int count = 0, ret;
        int mode_flags = 0;
        bool verbose_prune = true;
        enum drm_connector_status old_status;
        struct drm_modeset_acquire_ctx ctx;

        WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));

        drm_modeset_acquire_init(&ctx, 0);

        DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id,
                        connector->name);

retry:
        ret = drm_modeset_lock(&dev->mode_config.connection_mutex, &ctx);
        if (ret == -EDEADLK) {
                drm_modeset_backoff(&ctx);
                goto retry;
        } else
                WARN_ON(ret < 0);

        /* set all old modes to the stale state */
        list_for_each_entry(mode, &connector->modes, head)
                mode->status = MODE_STALE;

        old_status = connector->status;

        if (connector->force) {
                if (connector->force == DRM_FORCE_ON ||
                    connector->force == DRM_FORCE_ON_DIGITAL)
                        connector->status = connector_status_connected;
                else
                        connector->status = connector_status_disconnected;
                if (connector->funcs->force)
                        connector->funcs->force(connector);
        } else {
                ret = drm_helper_probe_detect(connector, &ctx, true);

                if (ret == -EDEADLK) {
                        drm_modeset_backoff(&ctx);
                        goto retry;
                } else if (WARN(ret < 0, "Invalid return value %i for connector detection\n", ret))
                        ret = connector_status_unknown;

                connector->status = ret;
        }

        /*
         * Normally either the driver's hpd code or the poll loop should
         * pick up any changes and fire the hotplug event. But if
         * userspace sneaks in a probe, we might miss a change. Hence
         * check here, and if anything changed start the hotplug code.
         */
        if (old_status != connector->status) {
                DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
                              connector->base.id,
                              connector->name,
                              drm_get_connector_status_name(old_status),
                              drm_get_connector_status_name(connector->status));

                /*
                 * The hotplug event code might call into the fb
                 * helpers, and so expects that we do not hold any
                 * locks. Fire up the poll struct instead, it will
                 * disable itself again.
                 */
                dev->mode_config.delayed_event = true;
                if (dev->mode_config.poll_enabled)
                        schedule_delayed_work(&dev->mode_config.output_poll_work,
                                              0);
        }

        /* Re-enable polling in case the global poll config changed. */
        if (drm_kms_helper_poll != dev->mode_config.poll_running)
                drm_kms_helper_poll_enable(dev);

        dev->mode_config.poll_running = drm_kms_helper_poll;

        if (connector->status == connector_status_disconnected) {
                DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n",
                        connector->base.id, connector->name);
                drm_connector_update_edid_property(connector, NULL);
                verbose_prune = false;
                goto prune;
        }

        count = (*connector_funcs->get_modes)(connector);

        /*
         * Fallback for when DDC probe failed in drm_get_edid() and thus skipped
         * override/firmware EDID.
         */
        if (count == 0 && connector->status == connector_status_connected)
                count = drm_add_override_edid_modes(connector);

        if (count == 0 && (connector->status == connector_status_connected ||
                           connector->status == connector_status_unknown))
                count = drm_add_modes_noedid(connector, 1024, 768);
        count += drm_helper_probe_add_cmdline_mode(connector);
        if (count == 0)
                goto prune;

        drm_connector_list_update(connector);

        if (connector->interlace_allowed)
                mode_flags |= DRM_MODE_FLAG_INTERLACE;
        if (connector->doublescan_allowed)
                mode_flags |= DRM_MODE_FLAG_DBLSCAN;
        if (connector->stereo_allowed)
                mode_flags |= DRM_MODE_FLAG_3D_MASK;

        list_for_each_entry(mode, &connector->modes, head) {
                if (mode->status != MODE_OK)
                        continue;

                mode->status = drm_mode_validate_driver(dev, mode);
                if (mode->status != MODE_OK)
                        continue;

                mode->status = drm_mode_validate_size(mode, maxX, maxY);
                if (mode->status != MODE_OK)
                        continue;

                mode->status = drm_mode_validate_flag(mode, mode_flags);
                if (mode->status != MODE_OK)
                        continue;

                ret = drm_mode_validate_pipeline(mode, connector, &ctx,
                                                 &mode->status);
                if (ret) {
                        drm_dbg_kms(dev,
                                    "drm_mode_validate_pipeline failed: %d\n",
                                    ret);

                        if (drm_WARN_ON_ONCE(dev, ret != -EDEADLK)) {
                                mode->status = MODE_ERROR;
                        } else {
                                drm_modeset_backoff(&ctx);
                                goto retry;
                        }
                }

                if (mode->status != MODE_OK)
                        continue;
                mode->status = drm_mode_validate_ycbcr420(mode, connector);
        }

prune:
        drm_mode_prune_invalid(dev, &connector->modes, verbose_prune);

        drm_modeset_drop_locks(&ctx);
        drm_modeset_acquire_fini(&ctx);

        if (list_empty(&connector->modes))
                return 0;

        drm_mode_sort(&connector->modes);

        DRM_DEBUG_KMS("[CONNECTOR:%d:%s] probed modes :\n", connector->base.id,
                        connector->name);
        list_for_each_entry(mode, &connector->modes, head) {
                drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
                drm_mode_debug_printmodeline(mode);
        }

        return count;
}
EXPORT_SYMBOL(drm_helper_probe_single_connector_modes);

/**
 * drm_kms_helper_hotplug_event - fire off KMS hotplug events
 * @dev: drm_device whose connector state changed
 *
 * This function fires off the uevent for userspace and also calls the
 * output_poll_changed function, which is most commonly used to inform the fbdev
 * emulation code and allow it to update the fbcon output configuration.
 *
 * Drivers should call this from their hotplug handling code when a change is
 * detected. Note that this function does not do any output detection of its
 * own, like drm_helper_hpd_irq_event() does - this is assumed to be done by the
 * driver already.
 *
 * This function must be called from process context with no mode
 * setting locks held.
 */
void drm_kms_helper_hotplug_event(struct drm_device *dev)
{
        /* send a uevent + call fbdev */
        drm_sysfs_hotplug_event(dev);
        if (dev->mode_config.funcs->output_poll_changed)
                dev->mode_config.funcs->output_poll_changed(dev);

        drm_client_dev_hotplug(dev);
}
EXPORT_SYMBOL(drm_kms_helper_hotplug_event);

static void output_poll_execute(struct work_struct *work)
{
        struct delayed_work *delayed_work = to_delayed_work(work);
        struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_work);
        struct drm_connector *connector;
        struct drm_connector_list_iter conn_iter;
        enum drm_connector_status old_status;
        bool repoll = false, changed;
        u64 old_epoch_counter;

        if (!dev->mode_config.poll_enabled)
                return;

        /* Pick up any changes detected by the probe functions. */
        changed = dev->mode_config.delayed_event;
        dev->mode_config.delayed_event = false;

        if (!drm_kms_helper_poll)
                goto out;

        if (!mutex_trylock(&dev->mode_config.mutex)) {
                repoll = true;
                goto out;
        }

        drm_connector_list_iter_begin(dev, &conn_iter);
        drm_for_each_connector_iter(connector, &conn_iter) {
                /* Ignore forced connectors. */
                if (connector->force)
                        continue;

                /* Ignore HPD capable connectors and connectors where we don't
                 * want any hotplug detection at all for polling. */
                if (!connector->polled || connector->polled == DRM_CONNECTOR_POLL_HPD)
                        continue;

                old_status = connector->status;
                /* if we are connected and don't want to poll for disconnect
                   skip it */
                if (old_status == connector_status_connected &&
                    !(connector->polled & DRM_CONNECTOR_POLL_DISCONNECT))
                        continue;

                repoll = true;

                old_epoch_counter = connector->epoch_counter;
                connector->status = drm_helper_probe_detect(connector, NULL, false);
                if (old_epoch_counter != connector->epoch_counter) {
                        const char *old, *new;

                        /*
                         * The poll work sets force=false when calling detect so
                         * that drivers can avoid to do disruptive tests (e.g.
                         * when load detect cycles could cause flickering on
                         * other, running displays). This bears the risk that we
                         * flip-flop between unknown here in the poll work and
                         * the real state when userspace forces a full detect
                         * call after receiving a hotplug event due to this
                         * change.
                         *
                         * Hence clamp an unknown detect status to the old
                         * value.
                         */
                        if (connector->status == connector_status_unknown) {
                                connector->status = old_status;
                                continue;
                        }

                        old = drm_get_connector_status_name(old_status);
                        new = drm_get_connector_status_name(connector->status);

                        DRM_DEBUG_KMS("[CONNECTOR:%d:%s] "
                                      "status updated from %s to %s\n",
                                      connector->base.id,
                                      connector->name,
                                      old, new);
                        DRM_DEBUG_KMS("[CONNECTOR:%d:%s] epoch counter %llu -> %llu\n",
                                      connector->base.id, connector->name,
                                      old_epoch_counter, connector->epoch_counter);

                        changed = true;
                }
        }
        drm_connector_list_iter_end(&conn_iter);

        mutex_unlock(&dev->mode_config.mutex);

out:
        if (changed)
                drm_kms_helper_hotplug_event(dev);

        if (repoll)
                schedule_delayed_work(delayed_work, DRM_OUTPUT_POLL_PERIOD);
}

/**
 * drm_kms_helper_is_poll_worker - is %current task an output poll worker?
 *
 * Determine if %current task is an output poll worker.  This can be used
 * to select distinct code paths for output polling versus other contexts.
 *
 * One use case is to avoid a deadlock between the output poll worker and
 * the autosuspend worker wherein the latter waits for polling to finish
 * upon calling drm_kms_helper_poll_disable(), while the former waits for
 * runtime suspend to finish upon calling pm_runtime_get_sync() in a
 * connector ->detect hook.
 */
bool drm_kms_helper_is_poll_worker(void)
{
        struct work_struct *work = current_work();

        return work && work->func == output_poll_execute;
}
EXPORT_SYMBOL(drm_kms_helper_is_poll_worker);

/**
 * drm_kms_helper_poll_disable - disable output polling
 * @dev: drm_device
 *
 * This function disables the output polling work.
 *
 * Drivers can call this helper from their device suspend implementation. It is
 * not an error to call this even when output polling isn't enabled or already
 * disabled. Polling is re-enabled by calling drm_kms_helper_poll_enable().
 *
 * Note that calls to enable and disable polling must be strictly ordered, which
 * is automatically the case when they're only call from suspend/resume
 * callbacks.
 */
void drm_kms_helper_poll_disable(struct drm_device *dev)
{
        if (!dev->mode_config.poll_enabled)
                return;
        cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
}
EXPORT_SYMBOL(drm_kms_helper_poll_disable);

/**
 * drm_kms_helper_poll_init - initialize and enable output polling
 * @dev: drm_device
 *
 * This function intializes and then also enables output polling support for
 * @dev. Drivers which do not have reliable hotplug support in hardware can use
 * this helper infrastructure to regularly poll such connectors for changes in
 * their connection state.
 *
 * Drivers can control which connectors are polled by setting the
 * DRM_CONNECTOR_POLL_CONNECT and DRM_CONNECTOR_POLL_DISCONNECT flags. On
 * connectors where probing live outputs can result in visual distortion drivers
 * should not set the DRM_CONNECTOR_POLL_DISCONNECT flag to avoid this.
 * Connectors which have no flag or only DRM_CONNECTOR_POLL_HPD set are
 * completely ignored by the polling logic.
 *
 * Note that a connector can be both polled and probed from the hotplug handler,
 * in case the hotplug interrupt is known to be unreliable.
 */
void drm_kms_helper_poll_init(struct drm_device *dev)
{
        INIT_DELAYED_WORK(&dev->mode_config.output_poll_work, output_poll_execute);
        dev->mode_config.poll_enabled = true;

        drm_kms_helper_poll_enable(dev);
}
EXPORT_SYMBOL(drm_kms_helper_poll_init);

/**
 * drm_kms_helper_poll_fini - disable output polling and clean it up
 * @dev: drm_device
 */
void drm_kms_helper_poll_fini(struct drm_device *dev)
{
        if (!dev->mode_config.poll_enabled)
                return;

        dev->mode_config.poll_enabled = false;
        cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
}
EXPORT_SYMBOL(drm_kms_helper_poll_fini);

/**
 * drm_helper_hpd_irq_event - hotplug processing
 * @dev: drm_device
 *
 * Drivers can use this helper function to run a detect cycle on all connectors
 * which have the DRM_CONNECTOR_POLL_HPD flag set in their &polled member. All
 * other connectors are ignored, which is useful to avoid reprobing fixed
 * panels.
 *
 * This helper function is useful for drivers which can't or don't track hotplug
 * interrupts for each connector.
 *
 * Drivers which support hotplug interrupts for each connector individually and
 * which have a more fine-grained detect logic should bypass this code and
 * directly call drm_kms_helper_hotplug_event() in case the connector state
 * changed.
 *
 * This function must be called from process context with no mode
 * setting locks held.
 *
 * Note that a connector can be both polled and probed from the hotplug handler,
 * in case the hotplug interrupt is known to be unreliable.
 */
bool drm_helper_hpd_irq_event(struct drm_device *dev)
{
        struct drm_connector *connector;
        struct drm_connector_list_iter conn_iter;
        enum drm_connector_status old_status;
        bool changed = false;
        u64 old_epoch_counter;

        if (!dev->mode_config.poll_enabled)
                return false;

        mutex_lock(&dev->mode_config.mutex);
        drm_connector_list_iter_begin(dev, &conn_iter);
        drm_for_each_connector_iter(connector, &conn_iter) {
                /* Only handle HPD capable connectors. */
                if (!(connector->polled & DRM_CONNECTOR_POLL_HPD))
                        continue;

                old_status = connector->status;

                old_epoch_counter = connector->epoch_counter;

                DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Old epoch counter %llu\n", connector->base.id,
                              connector->name,
                              old_epoch_counter);

                connector->status = drm_helper_probe_detect(connector, NULL, false);
                DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
                              connector->base.id,
                              connector->name,
                              drm_get_connector_status_name(old_status),
                              drm_get_connector_status_name(connector->status));

                DRM_DEBUG_KMS("[CONNECTOR:%d:%s] New epoch counter %llu\n",
                              connector->base.id,
                              connector->name,
                              connector->epoch_counter);

                /*
                 * Check if epoch counter had changed, meaning that we need
                 * to send a uevent.
                 */
                if (old_epoch_counter != connector->epoch_counter)
                        changed = true;

        }
        drm_connector_list_iter_end(&conn_iter);
        mutex_unlock(&dev->mode_config.mutex);

        if (changed) {
                drm_kms_helper_hotplug_event(dev);
                DRM_DEBUG_KMS("Sent hotplug event\n");
        }

        return changed;
}
EXPORT_SYMBOL(drm_helper_hpd_irq_event);