/*
 * Copyright (C) 2017 Spreadtrum Communications Inc.
 *
 * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 */

#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>

#define I2C_CTL                 0x00
#define I2C_ADDR_CFG            0x04
#define I2C_COUNT               0x08
#define I2C_RX                  0x0c
#define I2C_TX                  0x10
#define I2C_STATUS              0x14
#define I2C_HSMODE_CFG          0x18
#define I2C_VERSION             0x1c
#define ADDR_DVD0               0x20
#define ADDR_DVD1               0x24
#define ADDR_STA0_DVD           0x28
#define ADDR_RST                0x2c

/* I2C_CTL */
#define STP_EN                  BIT(20)
#define FIFO_AF_LVL_MASK        GENMASK(19, 16)
#define FIFO_AF_LVL             16
#define FIFO_AE_LVL_MASK        GENMASK(15, 12)
#define FIFO_AE_LVL             12
#define I2C_DMA_EN              BIT(11)
#define FULL_INTEN              BIT(10)
#define EMPTY_INTEN             BIT(9)
#define I2C_DVD_OPT             BIT(8)
#define I2C_OUT_OPT             BIT(7)
#define I2C_TRIM_OPT            BIT(6)
#define I2C_HS_MODE             BIT(4)
#define I2C_MODE                BIT(3)
#define I2C_EN                  BIT(2)
#define I2C_INT_EN              BIT(1)
#define I2C_START               BIT(0)

/* I2C_STATUS */
#define SDA_IN                  BIT(21)
#define SCL_IN                  BIT(20)
#define FIFO_FULL               BIT(4)
#define FIFO_EMPTY              BIT(3)
#define I2C_INT                 BIT(2)
#define I2C_RX_ACK              BIT(1)
#define I2C_BUSY                BIT(0)

/* ADDR_RST */
#define I2C_RST                 BIT(0)

#define I2C_FIFO_DEEP           12
#define I2C_FIFO_FULL_THLD      15
#define I2C_FIFO_EMPTY_THLD     4
#define I2C_DATA_STEP           8
#define I2C_ADDR_DVD0_CALC(high, low)   \
        ((((high) & GENMASK(15, 0)) << 16) | ((low) & GENMASK(15, 0)))
#define I2C_ADDR_DVD1_CALC(high, low)   \
        (((high) & GENMASK(31, 16)) | (((low) & GENMASK(31, 16)) >> 16))

/* timeout (ms) for pm runtime autosuspend */
#define SPRD_I2C_PM_TIMEOUT     1000
/* timeout (ms) for transfer message */
#define I2C_XFER_TIMEOUT        1000

/* SPRD i2c data structure */
struct sprd_i2c {
        struct i2c_adapter adap;
        struct device *dev;
        void __iomem *base;
        struct i2c_msg *msg;
        struct clk *clk;
        u32 src_clk;
        u32 bus_freq;
        struct completion complete;
        u8 *buf;
        u32 count;
        int irq;
        int err;
};

static void sprd_i2c_set_count(struct sprd_i2c *i2c_dev, u32 count)
{
        writel(count, i2c_dev->base + I2C_COUNT);
}

static void sprd_i2c_send_stop(struct sprd_i2c *i2c_dev, int stop)
{
        u32 tmp = readl(i2c_dev->base + I2C_CTL);

        if (stop)
                writel(tmp & ~STP_EN, i2c_dev->base + I2C_CTL);
        else
                writel(tmp | STP_EN, i2c_dev->base + I2C_CTL);
}

static void sprd_i2c_clear_start(struct sprd_i2c *i2c_dev)
{
        u32 tmp = readl(i2c_dev->base + I2C_CTL);

        writel(tmp & ~I2C_START, i2c_dev->base + I2C_CTL);
}

static void sprd_i2c_clear_ack(struct sprd_i2c *i2c_dev)
{
        u32 tmp = readl(i2c_dev->base + I2C_STATUS);

        writel(tmp & ~I2C_RX_ACK, i2c_dev->base + I2C_STATUS);
}

static void sprd_i2c_clear_irq(struct sprd_i2c *i2c_dev)
{
        u32 tmp = readl(i2c_dev->base + I2C_STATUS);

        writel(tmp & ~I2C_INT, i2c_dev->base + I2C_STATUS);
}

static void sprd_i2c_reset_fifo(struct sprd_i2c *i2c_dev)
{
        writel(I2C_RST, i2c_dev->base + ADDR_RST);
}

static void sprd_i2c_set_devaddr(struct sprd_i2c *i2c_dev, struct i2c_msg *m)
{
        writel(m->addr << 1, i2c_dev->base + I2C_ADDR_CFG);
}

static void sprd_i2c_write_bytes(struct sprd_i2c *i2c_dev, u8 *buf, u32 len)
{
        u32 i;

        for (i = 0; i < len; i++)
                writeb(buf[i], i2c_dev->base + I2C_TX);
}

static void sprd_i2c_read_bytes(struct sprd_i2c *i2c_dev, u8 *buf, u32 len)
{
        u32 i;

        for (i = 0; i < len; i++)
                buf[i] = readb(i2c_dev->base + I2C_RX);
}

static void sprd_i2c_set_full_thld(struct sprd_i2c *i2c_dev, u32 full_thld)
{
        u32 tmp = readl(i2c_dev->base + I2C_CTL);

        tmp &= ~FIFO_AF_LVL_MASK;
        tmp |= full_thld << FIFO_AF_LVL;
        writel(tmp, i2c_dev->base + I2C_CTL);
};

static void sprd_i2c_set_empty_thld(struct sprd_i2c *i2c_dev, u32 empty_thld)
{
        u32 tmp = readl(i2c_dev->base + I2C_CTL);

        tmp &= ~FIFO_AE_LVL_MASK;
        tmp |= empty_thld << FIFO_AE_LVL;
        writel(tmp, i2c_dev->base + I2C_CTL);
};

static void sprd_i2c_set_fifo_full_int(struct sprd_i2c *i2c_dev, int enable)
{
        u32 tmp = readl(i2c_dev->base + I2C_CTL);

        if (enable)
                tmp |= FULL_INTEN;
        else
                tmp &= ~FULL_INTEN;

        writel(tmp, i2c_dev->base + I2C_CTL);
};

static void sprd_i2c_set_fifo_empty_int(struct sprd_i2c *i2c_dev, int enable)
{
        u32 tmp = readl(i2c_dev->base + I2C_CTL);

        if (enable)
                tmp |= EMPTY_INTEN;
        else
                tmp &= ~EMPTY_INTEN;

        writel(tmp, i2c_dev->base + I2C_CTL);
};

static void sprd_i2c_opt_start(struct sprd_i2c *i2c_dev)
{
        u32 tmp = readl(i2c_dev->base + I2C_CTL);

        writel(tmp | I2C_START, i2c_dev->base + I2C_CTL);
}

static void sprd_i2c_opt_mode(struct sprd_i2c *i2c_dev, int rw)
{
        u32 cmd = readl(i2c_dev->base + I2C_CTL) & ~I2C_MODE;

        writel(cmd | rw << 3, i2c_dev->base + I2C_CTL);
}

static void sprd_i2c_data_transfer(struct sprd_i2c *i2c_dev)
{
        u32 i2c_count = i2c_dev->count;
        u32 need_tran = i2c_count <= I2C_FIFO_DEEP ? i2c_count : I2C_FIFO_DEEP;
        struct i2c_msg *msg = i2c_dev->msg;

        if (msg->flags & I2C_M_RD) {
                sprd_i2c_read_bytes(i2c_dev, i2c_dev->buf, I2C_FIFO_FULL_THLD);
                i2c_dev->count -= I2C_FIFO_FULL_THLD;
                i2c_dev->buf += I2C_FIFO_FULL_THLD;

                /*
                 * If the read data count is larger than rx fifo full threshold,
                 * we should enable the rx fifo full interrupt to read data
                 * again.
                 */
                if (i2c_dev->count >= I2C_FIFO_FULL_THLD)
                        sprd_i2c_set_fifo_full_int(i2c_dev, 1);
        } else {
                sprd_i2c_write_bytes(i2c_dev, i2c_dev->buf, need_tran);
                i2c_dev->buf += need_tran;
                i2c_dev->count -= need_tran;

                /*
                 * If the write data count is arger than tx fifo depth which
                 * means we can not write all data in one time, then we should
                 * enable the tx fifo empty interrupt to write again.
                 */
                if (i2c_count > I2C_FIFO_DEEP)
                        sprd_i2c_set_fifo_empty_int(i2c_dev, 1);
        }
}

static int sprd_i2c_handle_msg(struct i2c_adapter *i2c_adap,
                               struct i2c_msg *msg, bool is_last_msg)
{
        struct sprd_i2c *i2c_dev = i2c_adap->algo_data;
        unsigned long time_left;

        i2c_dev->msg = msg;
        i2c_dev->buf = msg->buf;
        i2c_dev->count = msg->len;

        reinit_completion(&i2c_dev->complete);
        sprd_i2c_reset_fifo(i2c_dev);
        sprd_i2c_set_devaddr(i2c_dev, msg);
        sprd_i2c_set_count(i2c_dev, msg->len);

        if (msg->flags & I2C_M_RD) {
                sprd_i2c_opt_mode(i2c_dev, 1);
                sprd_i2c_send_stop(i2c_dev, 1);
        } else {
                sprd_i2c_opt_mode(i2c_dev, 0);
                sprd_i2c_send_stop(i2c_dev, !!is_last_msg);
        }

        /*
         * We should enable rx fifo full interrupt to get data when receiving
         * full data.
         */
        if (msg->flags & I2C_M_RD)
                sprd_i2c_set_fifo_full_int(i2c_dev, 1);
        else
                sprd_i2c_data_transfer(i2c_dev);

        sprd_i2c_opt_start(i2c_dev);

        time_left = wait_for_completion_timeout(&i2c_dev->complete,
                                msecs_to_jiffies(I2C_XFER_TIMEOUT));
        if (!time_left)
                return -ETIMEDOUT;

        return i2c_dev->err;
}

static int sprd_i2c_master_xfer(struct i2c_adapter *i2c_adap,
                                struct i2c_msg *msgs, int num)
{
        struct sprd_i2c *i2c_dev = i2c_adap->algo_data;
        int im, ret;

        ret = pm_runtime_resume_and_get(i2c_dev->dev);
        if (ret < 0)
                return ret;

        for (im = 0; im < num - 1; im++) {
                ret = sprd_i2c_handle_msg(i2c_adap, &msgs[im], 0);
                if (ret)
                        goto err_msg;
        }

        ret = sprd_i2c_handle_msg(i2c_adap, &msgs[im++], 1);

err_msg:
        pm_runtime_mark_last_busy(i2c_dev->dev);
        pm_runtime_put_autosuspend(i2c_dev->dev);

        return ret < 0 ? ret : im;
}

static u32 sprd_i2c_func(struct i2c_adapter *adap)
{
        return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}

static const struct i2c_algorithm sprd_i2c_algo = {
        .master_xfer = sprd_i2c_master_xfer,
        .functionality = sprd_i2c_func,
};

static void sprd_i2c_set_clk(struct sprd_i2c *i2c_dev, u32 freq)
{
        u32 apb_clk = i2c_dev->src_clk;
        /*
         * From I2C databook, the prescale calculation formula:
         * prescale = freq_i2c / (4 * freq_scl) - 1;
         */
        u32 i2c_dvd = apb_clk / (4 * freq) - 1;
        /*
         * From I2C databook, the high period of SCL clock is recommended as
         * 40% (2/5), and the low period of SCL clock is recommended as 60%
         * (3/5), then the formula should be:
         * high = (prescale * 2 * 2) / 5
         * low = (prescale * 2 * 3) / 5
         */
        u32 high = ((i2c_dvd << 1) * 2) / 5;
        u32 low = ((i2c_dvd << 1) * 3) / 5;
        u32 div0 = I2C_ADDR_DVD0_CALC(high, low);
        u32 div1 = I2C_ADDR_DVD1_CALC(high, low);

        writel(div0, i2c_dev->base + ADDR_DVD0);
        writel(div1, i2c_dev->base + ADDR_DVD1);

        /* Start hold timing = hold time(us) * source clock */
        if (freq == I2C_MAX_FAST_MODE_FREQ)
                writel((6 * apb_clk) / 10000000, i2c_dev->base + ADDR_STA0_DVD);
        else if (freq == I2C_MAX_STANDARD_MODE_FREQ)
                writel((4 * apb_clk) / 1000000, i2c_dev->base + ADDR_STA0_DVD);
}

static void sprd_i2c_enable(struct sprd_i2c *i2c_dev)
{
        u32 tmp = I2C_DVD_OPT;

        writel(tmp, i2c_dev->base + I2C_CTL);

        sprd_i2c_set_full_thld(i2c_dev, I2C_FIFO_FULL_THLD);
        sprd_i2c_set_empty_thld(i2c_dev, I2C_FIFO_EMPTY_THLD);

        sprd_i2c_set_clk(i2c_dev, i2c_dev->bus_freq);
        sprd_i2c_reset_fifo(i2c_dev);
        sprd_i2c_clear_irq(i2c_dev);

        tmp = readl(i2c_dev->base + I2C_CTL);
        writel(tmp | I2C_EN | I2C_INT_EN, i2c_dev->base + I2C_CTL);
}

static irqreturn_t sprd_i2c_isr_thread(int irq, void *dev_id)
{
        struct sprd_i2c *i2c_dev = dev_id;
        struct i2c_msg *msg = i2c_dev->msg;
        bool ack = !(readl(i2c_dev->base + I2C_STATUS) & I2C_RX_ACK);
        u32 i2c_tran;

        if (msg->flags & I2C_M_RD)
                i2c_tran = i2c_dev->count >= I2C_FIFO_FULL_THLD;
        else
                i2c_tran = i2c_dev->count;

        /*
         * If we got one ACK from slave when writing data, and we did not
         * finish this transmission (i2c_tran is not zero), then we should
         * continue to write data.
         *
         * For reading data, ack is always true, if i2c_tran is not 0 which
         * means we still need to contine to read data from slave.
         */
        if (i2c_tran && ack) {
                sprd_i2c_data_transfer(i2c_dev);
                return IRQ_HANDLED;
        }

        i2c_dev->err = 0;

        /*
         * If we did not get one ACK from slave when writing data, we should
         * return -EIO to notify users.
         */
        if (!ack)
                i2c_dev->err = -EIO;
        else if (msg->flags & I2C_M_RD && i2c_dev->count)
                sprd_i2c_read_bytes(i2c_dev, i2c_dev->buf, i2c_dev->count);

        /* Transmission is done and clear ack and start operation */
        sprd_i2c_clear_ack(i2c_dev);
        sprd_i2c_clear_start(i2c_dev);
        complete(&i2c_dev->complete);

        return IRQ_HANDLED;
}

static irqreturn_t sprd_i2c_isr(int irq, void *dev_id)
{
        struct sprd_i2c *i2c_dev = dev_id;
        struct i2c_msg *msg = i2c_dev->msg;
        bool ack = !(readl(i2c_dev->base + I2C_STATUS) & I2C_RX_ACK);
        u32 i2c_tran;

        if (msg->flags & I2C_M_RD)
                i2c_tran = i2c_dev->count >= I2C_FIFO_FULL_THLD;
        else
                i2c_tran = i2c_dev->count;

        /*
         * If we did not get one ACK from slave when writing data, then we
         * should finish this transmission since we got some errors.
         *
         * When writing data, if i2c_tran == 0 which means we have writen
         * done all data, then we can finish this transmission.
         *
         * When reading data, if conut < rx fifo full threshold, which
         * means we can read all data in one time, then we can finish this
         * transmission too.
         */
        if (!i2c_tran || !ack) {
                sprd_i2c_clear_start(i2c_dev);
                sprd_i2c_clear_irq(i2c_dev);
        }

        sprd_i2c_set_fifo_empty_int(i2c_dev, 0);
        sprd_i2c_set_fifo_full_int(i2c_dev, 0);

        return IRQ_WAKE_THREAD;
}

static int sprd_i2c_clk_init(struct sprd_i2c *i2c_dev)
{
        struct clk *clk_i2c, *clk_parent;

        clk_i2c = devm_clk_get(i2c_dev->dev, "i2c");
        if (IS_ERR(clk_i2c)) {
                dev_warn(i2c_dev->dev, "i2c%d can't get the i2c clock\n",
                         i2c_dev->adap.nr);
                clk_i2c = NULL;
        }

        clk_parent = devm_clk_get(i2c_dev->dev, "source");
        if (IS_ERR(clk_parent)) {
                dev_warn(i2c_dev->dev, "i2c%d can't get the source clock\n",
                         i2c_dev->adap.nr);
                clk_parent = NULL;
        }

        if (clk_set_parent(clk_i2c, clk_parent))
                i2c_dev->src_clk = clk_get_rate(clk_i2c);
        else
                i2c_dev->src_clk = 26000000;

        dev_dbg(i2c_dev->dev, "i2c%d set source clock is %d\n",
                i2c_dev->adap.nr, i2c_dev->src_clk);

        i2c_dev->clk = devm_clk_get(i2c_dev->dev, "enable");
        if (IS_ERR(i2c_dev->clk)) {
                dev_err(i2c_dev->dev, "i2c%d can't get the enable clock\n",
                        i2c_dev->adap.nr);
                return PTR_ERR(i2c_dev->clk);
        }

        return 0;
}

static int sprd_i2c_probe(struct platform_device *pdev)
{
        struct device *dev = &pdev->dev;
        struct sprd_i2c *i2c_dev;
        u32 prop;
        int ret;

        pdev->id = of_alias_get_id(dev->of_node, "i2c");

        i2c_dev = devm_kzalloc(dev, sizeof(struct sprd_i2c), GFP_KERNEL);
        if (!i2c_dev)
                return -ENOMEM;

        i2c_dev->base = devm_platform_ioremap_resource(pdev, 0);
        if (IS_ERR(i2c_dev->base))
                return PTR_ERR(i2c_dev->base);

        i2c_dev->irq = platform_get_irq(pdev, 0);
        if (i2c_dev->irq < 0)
                return i2c_dev->irq;

        i2c_set_adapdata(&i2c_dev->adap, i2c_dev);
        init_completion(&i2c_dev->complete);
        snprintf(i2c_dev->adap.name, sizeof(i2c_dev->adap.name),
                 "%s", "sprd-i2c");

        i2c_dev->bus_freq = I2C_MAX_STANDARD_MODE_FREQ;
        i2c_dev->adap.owner = THIS_MODULE;
        i2c_dev->dev = dev;
        i2c_dev->adap.retries = 3;
        i2c_dev->adap.algo = &sprd_i2c_algo;
        i2c_dev->adap.algo_data = i2c_dev;
        i2c_dev->adap.dev.parent = dev;
        i2c_dev->adap.nr = pdev->id;
        i2c_dev->adap.dev.of_node = dev->of_node;

        if (!of_property_read_u32(dev->of_node, "clock-frequency", &prop))
                i2c_dev->bus_freq = prop;

        /* We only support 100k and 400k now, otherwise will return error. */
        if (i2c_dev->bus_freq != I2C_MAX_STANDARD_MODE_FREQ &&
            i2c_dev->bus_freq != I2C_MAX_FAST_MODE_FREQ)
                return -EINVAL;

        ret = sprd_i2c_clk_init(i2c_dev);
        if (ret)
                return ret;

        platform_set_drvdata(pdev, i2c_dev);

        ret = clk_prepare_enable(i2c_dev->clk);
        if (ret)
                return ret;

        sprd_i2c_enable(i2c_dev);

        pm_runtime_set_autosuspend_delay(i2c_dev->dev, SPRD_I2C_PM_TIMEOUT);
        pm_runtime_use_autosuspend(i2c_dev->dev);
        pm_runtime_set_active(i2c_dev->dev);
        pm_runtime_enable(i2c_dev->dev);

        ret = pm_runtime_get_sync(i2c_dev->dev);
        if (ret < 0)
                goto err_rpm_put;

        ret = devm_request_threaded_irq(dev, i2c_dev->irq,
                sprd_i2c_isr, sprd_i2c_isr_thread,
                IRQF_NO_SUSPEND | IRQF_ONESHOT,
                pdev->name, i2c_dev);
        if (ret) {
                dev_err(&pdev->dev, "failed to request irq %d\n", i2c_dev->irq);
                goto err_rpm_put;
        }

        ret = i2c_add_numbered_adapter(&i2c_dev->adap);
        if (ret) {
                dev_err(&pdev->dev, "add adapter failed\n");
                goto err_rpm_put;
        }

        pm_runtime_mark_last_busy(i2c_dev->dev);
        pm_runtime_put_autosuspend(i2c_dev->dev);
        return 0;

err_rpm_put:
        pm_runtime_put_noidle(i2c_dev->dev);
        pm_runtime_disable(i2c_dev->dev);
        clk_disable_unprepare(i2c_dev->clk);
        return ret;
}

static int sprd_i2c_remove(struct platform_device *pdev)
{
        struct sprd_i2c *i2c_dev = platform_get_drvdata(pdev);
        int ret;

        ret = pm_runtime_resume_and_get(i2c_dev->dev);
        if (ret < 0)
                return ret;

        i2c_del_adapter(&i2c_dev->adap);
        clk_disable_unprepare(i2c_dev->clk);

        pm_runtime_put_noidle(i2c_dev->dev);
        pm_runtime_disable(i2c_dev->dev);

        return 0;
}

static int __maybe_unused sprd_i2c_suspend_noirq(struct device *dev)
{
        struct sprd_i2c *i2c_dev = dev_get_drvdata(dev);

        i2c_mark_adapter_suspended(&i2c_dev->adap);
        return pm_runtime_force_suspend(dev);
}

static int __maybe_unused sprd_i2c_resume_noirq(struct device *dev)
{
        struct sprd_i2c *i2c_dev = dev_get_drvdata(dev);

        i2c_mark_adapter_resumed(&i2c_dev->adap);
        return pm_runtime_force_resume(dev);
}

static int __maybe_unused sprd_i2c_runtime_suspend(struct device *dev)
{
        struct sprd_i2c *i2c_dev = dev_get_drvdata(dev);

        clk_disable_unprepare(i2c_dev->clk);

        return 0;
}

static int __maybe_unused sprd_i2c_runtime_resume(struct device *dev)
{
        struct sprd_i2c *i2c_dev = dev_get_drvdata(dev);
        int ret;

        ret = clk_prepare_enable(i2c_dev->clk);
        if (ret)
                return ret;

        sprd_i2c_enable(i2c_dev);

        return 0;
}

static const struct dev_pm_ops sprd_i2c_pm_ops = {
        SET_RUNTIME_PM_OPS(sprd_i2c_runtime_suspend,
                           sprd_i2c_runtime_resume, NULL)

        SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(sprd_i2c_suspend_noirq,
                                      sprd_i2c_resume_noirq)
};

static const struct of_device_id sprd_i2c_of_match[] = {
        { .compatible = "sprd,sc9860-i2c", },
        {},
};
MODULE_DEVICE_TABLE(of, sprd_i2c_of_match);

static struct platform_driver sprd_i2c_driver = {
        .probe = sprd_i2c_probe,
        .remove = sprd_i2c_remove,
        .driver = {
                   .name = "sprd-i2c",
                   .of_match_table = sprd_i2c_of_match,
                   .pm = &sprd_i2c_pm_ops,
        },
};

module_platform_driver(sprd_i2c_driver);

MODULE_DESCRIPTION("Spreadtrum I2C master controller driver");
MODULE_LICENSE("GPL v2");