1
2
3menuconfig RC_CORE
4 tristate "Remote Controller support"
5 depends on INPUT
6 help
7 Enable support for Remote Controllers on Linux. This is
8 needed in order to support several video capture adapters,
9 standalone IR receivers/transmitters, and RF receivers.
10
11 Enable this option if you have a video capture board even
12 if you don't need IR, as otherwise, you may not be able to
13 compile the driver for your adapter.
14
15 Say Y when you have a TV or an IR device.
16
17if RC_CORE
18source "drivers/media/rc/keymaps/Kconfig"
19
20config LIRC
21 bool "LIRC user interface"
22 help
23 Enable this option to enable the Linux Infrared Remote
24 Control user interface (e.g. /dev/lirc*). This interface
25 passes raw IR to and from userspace, which is needed for
26 IR transmitting (aka "blasting") and for the lirc daemon.
27
28config BPF_LIRC_MODE2
29 bool "Support for eBPF programs attached to lirc devices"
30 depends on BPF_SYSCALL
31 depends on RC_CORE=y
32 depends on LIRC
33 help
34 Allow attaching eBPF programs to a lirc device using the bpf(2)
35 syscall command BPF_PROG_ATTACH. This is supported for raw IR
36 receivers.
37
38 These eBPF programs can be used to decode IR into scancodes, for
39 IR protocols not supported by the kernel decoders.
40
41menuconfig RC_DECODERS
42 bool "Remote controller decoders"
43
44if RC_DECODERS
45config IR_NEC_DECODER
46 tristate "Enable IR raw decoder for the NEC protocol"
47 select BITREVERSE
48
49 help
50 Enable this option if you have IR with NEC protocol, and
51 if the IR is decoded in software
52
53config IR_RC5_DECODER
54 tristate "Enable IR raw decoder for the RC-5 protocol"
55 select BITREVERSE
56
57 help
58 Enable this option if you have IR with RC-5 protocol, and
59 if the IR is decoded in software
60
61config IR_RC6_DECODER
62 tristate "Enable IR raw decoder for the RC6 protocol"
63 select BITREVERSE
64
65 help
66 Enable this option if you have an infrared remote control which
67 uses the RC6 protocol, and you need software decoding support.
68
69config IR_JVC_DECODER
70 tristate "Enable IR raw decoder for the JVC protocol"
71 select BITREVERSE
72
73 help
74 Enable this option if you have an infrared remote control which
75 uses the JVC protocol, and you need software decoding support.
76
77config IR_SONY_DECODER
78 tristate "Enable IR raw decoder for the Sony protocol"
79 select BITREVERSE
80
81 help
82 Enable this option if you have an infrared remote control which
83 uses the Sony protocol, and you need software decoding support.
84
85config IR_SANYO_DECODER
86 tristate "Enable IR raw decoder for the Sanyo protocol"
87 select BITREVERSE
88
89 help
90 Enable this option if you have an infrared remote control which
91 uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes),
92 and you need software decoding support.
93
94config IR_SHARP_DECODER
95 tristate "Enable IR raw decoder for the Sharp protocol"
96 select BITREVERSE
97
98 help
99 Enable this option if you have an infrared remote control which
100 uses the Sharp protocol (Sharp, Denon), and you need software
101 decoding support.
102
103config IR_MCE_KBD_DECODER
104 tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
105 select BITREVERSE
106
107 help
108 Enable this option if you have a Microsoft Remote Keyboard for
109 Windows Media Center Edition, which you would like to use with
110 a raw IR receiver in your system.
111
112config IR_XMP_DECODER
113 tristate "Enable IR raw decoder for the XMP protocol"
114 select BITREVERSE
115
116 help
117 Enable this option if you have IR with XMP protocol, and
118 if the IR is decoded in software
119
120config IR_IMON_DECODER
121 tristate "Enable IR raw decoder for the iMON protocol"
122 help
123 Enable this option if you have iMON PAD or Antec Veris infrared
124 remote control and you would like to use it with a raw IR
125 receiver, or if you wish to use an encoder to transmit this IR.
126
127config IR_RCMM_DECODER
128 tristate "Enable IR raw decoder for the RC-MM protocol"
129 help
130 Enable this option when you have IR with RC-MM protocol, and
131 you need the software decoder. The driver supports 12,
132 24 and 32 bits RC-MM variants. You can enable or disable the
133 different modes using the following RC protocol keywords:
134 'rc-mm-12', 'rc-mm-24' and 'rc-mm-32'.
135
136 To compile this driver as a module, choose M here: the module
137 will be called ir-rcmm-decoder.
138
139endif
140
141menuconfig RC_DEVICES
142 bool "Remote Controller devices"
143
144if RC_DEVICES
145
146config RC_ATI_REMOTE
147 tristate "ATI / X10 based USB RF remote controls"
148 depends on USB
149 help
150 Say Y here if you want to use an X10 based USB remote control.
151 These are RF remotes with USB receivers.
152
153 Such devices include the ATI remote that comes with many of ATI's
154 All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote,
155 Medion RF remote, and SnapStream FireFly remote.
156
157 This driver provides mouse pointer, left and right mouse buttons,
158 and maps all the other remote buttons to keypress events.
159
160 To compile this driver as a module, choose M here: the module will be
161 called ati_remote.
162
163config IR_ENE
164 tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
165 depends on PNP || COMPILE_TEST
166 help
167 Say Y here to enable support for integrated infrared receiver
168 /transceiver made by ENE.
169
170 You can see if you have it by looking at lspnp output.
171 Output should include ENE0100 ENE0200 or something similar.
172
173 To compile this driver as a module, choose M here: the
174 module will be called ene_ir.
175
176config IR_HIX5HD2
177 tristate "Hisilicon hix5hd2 IR remote control"
178 depends on OF || COMPILE_TEST
179 help
180 Say Y here if you want to use hisilicon hix5hd2 remote control.
181 To compile this driver as a module, choose M here: the module will be
182 called ir-hix5hd2.
183
184 If you're not sure, select N here
185
186config IR_IMON
187 tristate "SoundGraph iMON Receiver and Display"
188 depends on USB
189 help
190 Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
191 IR Receiver and/or LCD/VFD/VGA display.
192
193 To compile this driver as a module, choose M here: the
194 module will be called imon.
195
196config IR_IMON_RAW
197 tristate "SoundGraph iMON Receiver (early raw IR models)"
198 depends on USB
199 help
200 Say Y here if you want to use a SoundGraph iMON IR Receiver,
201 early raw models.
202
203 To compile this driver as a module, choose M here: the
204 module will be called imon_raw.
205
206config IR_MCEUSB
207 tristate "Windows Media Center Ed. eHome Infrared Transceiver"
208 depends on USB
209 help
210 Say Y here if you want to use a Windows Media Center Edition
211 eHome Infrared Transceiver.
212
213 To compile this driver as a module, choose M here: the
214 module will be called mceusb.
215
216config IR_ITE_CIR
217 tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
218 depends on PNP || COMPILE_TEST
219 help
220 Say Y here to enable support for integrated infrared receivers
221 /transceivers made by ITE Tech Inc. These are found in
222 several ASUS devices, like the ASUS Digimatrix or the ASUS
223 EEEBox 1501U.
224
225 To compile this driver as a module, choose M here: the
226 module will be called ite-cir.
227
228config IR_FINTEK
229 tristate "Fintek Consumer Infrared Transceiver"
230 depends on PNP || COMPILE_TEST
231 help
232 Say Y here to enable support for integrated infrared receiver
233 /transceiver made by Fintek. This chip is found on assorted
234 Jetway motherboards (and of course, possibly others).
235
236 To compile this driver as a module, choose M here: the
237 module will be called fintek-cir.
238
239config IR_MESON
240 tristate "Amlogic Meson IR remote receiver"
241 depends on ARCH_MESON || COMPILE_TEST
242 help
243 Say Y if you want to use the IR remote receiver available
244 on Amlogic Meson SoCs.
245
246 To compile this driver as a module, choose M here: the
247 module will be called meson-ir.
248
249config IR_MTK
250 tristate "Mediatek IR remote receiver"
251 depends on ARCH_MEDIATEK || COMPILE_TEST
252 help
253 Say Y if you want to use the IR remote receiver available
254 on Mediatek SoCs.
255
256 To compile this driver as a module, choose M here: the
257 module will be called mtk-cir.
258
259config IR_NUVOTON
260 tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
261 depends on PNP || COMPILE_TEST
262 help
263 Say Y here to enable support for integrated infrared receiver
264 /transceiver made by Nuvoton (formerly Winbond). This chip is
265 found in the ASRock ION 330HT, as well as assorted Intel
266 DP55-series motherboards (and of course, possibly others).
267
268 To compile this driver as a module, choose M here: the
269 module will be called nuvoton-cir.
270
271config IR_REDRAT3
272 tristate "RedRat3 IR Transceiver"
273 depends on USB
274 select NEW_LEDS
275 select LEDS_CLASS
276 help
277 Say Y here if you want to use a RedRat3 Infrared Transceiver.
278
279 To compile this driver as a module, choose M here: the
280 module will be called redrat3.
281
282config IR_SPI
283 tristate "SPI connected IR LED"
284 depends on SPI && LIRC
285 depends on OF || COMPILE_TEST
286 help
287 Say Y if you want to use an IR LED connected through SPI bus.
288
289 To compile this driver as a module, choose M here: the module will be
290 called ir-spi.
291
292config IR_STREAMZAP
293 tristate "Streamzap PC Remote IR Receiver"
294 depends on USB
295 help
296 Say Y here if you want to use a Streamzap PC Remote
297 Infrared Receiver.
298
299 To compile this driver as a module, choose M here: the
300 module will be called streamzap.
301
302config IR_WINBOND_CIR
303 tristate "Winbond IR remote control"
304 depends on (X86 && PNP) || COMPILE_TEST
305 select NEW_LEDS
306 select LEDS_CLASS
307 select BITREVERSE
308 help
309 Say Y here if you want to use the IR remote functionality found
310 in some Winbond SuperI/O chips. Currently only the WPCD376I
311 chip is supported (included in some Intel Media series
312 motherboards).
313
314 To compile this driver as a module, choose M here: the module will
315 be called winbond_cir.
316
317config IR_IGORPLUGUSB
318 tristate "IgorPlug-USB IR Receiver"
319 depends on USB
320 help
321 Say Y here if you want to use the IgorPlug-USB IR Receiver by
322 Igor Cesko. This device is included on the Fit-PC2.
323
324 Note that this device can only record bursts of 36 IR pulses and
325 spaces, which is not enough for the NEC, Sanyo and RC-6 protocol.
326
327 To compile this driver as a module, choose M here: the module will
328 be called igorplugusb.
329
330config IR_IGUANA
331 tristate "IguanaWorks USB IR Transceiver"
332 depends on USB
333 help
334 Say Y here if you want to use the IguanaWorks USB IR Transceiver.
335 Both infrared receive and send are supported. If you want to
336 change the ID or the pin config, use the user space driver from
337 IguanaWorks.
338
339 Only firmware 0x0205 and later is supported.
340
341 To compile this driver as a module, choose M here: the module will
342 be called iguanair.
343
344config IR_TTUSBIR
345 tristate "TechnoTrend USB IR Receiver"
346 depends on USB
347 select NEW_LEDS
348 select LEDS_CLASS
349 help
350 Say Y here if you want to use the TechnoTrend USB IR Receiver. The
351 driver can control the led.
352
353 To compile this driver as a module, choose M here: the module will
354 be called ttusbir.
355
356config IR_RX51
357 tristate "Nokia N900 IR transmitter diode"
358 depends on (OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS || COMPILE_TEST) && RC_CORE
359 help
360 Say Y or M here if you want to enable support for the IR
361 transmitter diode built in the Nokia N900 (RX51) device.
362
363 The driver uses omap DM timers for generating the carrier
364 wave and pulses.
365
366source "drivers/media/rc/img-ir/Kconfig"
367
368config RC_LOOPBACK
369 tristate "Remote Control Loopback Driver"
370 help
371 Say Y here if you want support for the remote control loopback
372 driver which allows TX data to be sent back as RX data.
373 This is mostly useful for debugging purposes.
374
375 If you're not sure, select N here.
376
377 To compile this driver as a module, choose M here: the module will
378 be called rc_loopback.
379
380config IR_GPIO_CIR
381 tristate "GPIO IR remote control"
382 depends on (OF && GPIOLIB) || COMPILE_TEST
383 help
384 Say Y if you want to use GPIO based IR Receiver.
385
386 To compile this driver as a module, choose M here: the module will
387 be called gpio-ir-recv.
388
389config IR_GPIO_TX
390 tristate "GPIO IR Bit Banging Transmitter"
391 depends on LIRC
392 depends on (OF && GPIOLIB) || COMPILE_TEST
393 help
394 Say Y if you want to a GPIO based IR transmitter. This is a
395 bit banging driver.
396
397 To compile this driver as a module, choose M here: the module will
398 be called gpio-ir-tx.
399
400config IR_PWM_TX
401 tristate "PWM IR transmitter"
402 depends on LIRC
403 depends on PWM
404 depends on OF || COMPILE_TEST
405 help
406 Say Y if you want to use a PWM based IR transmitter. This is
407 more power efficient than the bit banging gpio driver.
408
409 To compile this driver as a module, choose M here: the module will
410 be called pwm-ir-tx.
411
412config RC_ST
413 tristate "ST remote control receiver"
414 depends on ARCH_STI || COMPILE_TEST
415 help
416 Say Y here if you want support for ST remote control driver
417 which allows both IR and UHF RX.
418 The driver passes raw pulse and space information to the LIRC decoder.
419
420 If you're not sure, select N here.
421
422config IR_SUNXI
423 tristate "SUNXI IR remote control"
424 depends on ARCH_SUNXI || COMPILE_TEST
425 help
426 Say Y if you want to use sunXi internal IR Controller
427
428 To compile this driver as a module, choose M here: the module will
429 be called sunxi-ir.
430
431config IR_SERIAL
432 tristate "Homebrew Serial Port Receiver"
433 help
434 Say Y if you want to use Homebrew Serial Port Receivers and
435 Transceivers.
436
437 To compile this driver as a module, choose M here: the module will
438 be called serial-ir.
439
440config IR_SERIAL_TRANSMITTER
441 bool "Serial Port Transmitter"
442 depends on IR_SERIAL
443 help
444 Serial Port Transmitter support
445
446config IR_SIR
447 tristate "Built-in SIR IrDA port"
448 help
449 Say Y if you want to use a IrDA SIR port Transceivers.
450
451 To compile this driver as a module, choose M here: the module will
452 be called sir-ir.
453
454config RC_XBOX_DVD
455 tristate "Xbox DVD Movie Playback Kit"
456 depends on USB
457 help
458 Say Y here if you want to use the Xbox DVD Movie Playback Kit.
459 These are IR remotes with USB receivers for the Original Xbox (2001).
460
461 To compile this driver as a module, choose M here: the module will be
462 called xbox_remote.
463
464config IR_TOY
465 tristate "Infrared Toy and IR Droid"
466 depends on USB
467 help
468 Say Y here if you want to use the Infrared Toy or IR Droid, USB
469 versions.
470
471 To compile this driver as a module, choose M here: the module will be
472 called ir_toy.
473
474endif
475
476endif
477
