// SPDX-License-Identifier: GPL-2.0+
/*
 *  Freescale lpuart serial port driver
 *
 *  Copyright 2012-2014 Freescale Semiconductor, Inc.
 */

#include <linux/clk.h>
#include <linux/console.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/dmapool.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_dma.h>
#include <linux/serial_core.h>
#include <linux/slab.h>
#include <linux/tty_flip.h>

/* All registers are 8-bit width */
#define UARTBDH                 0x00
#define UARTBDL                 0x01
#define UARTCR1                 0x02
#define UARTCR2                 0x03
#define UARTSR1                 0x04
#define UARTCR3                 0x06
#define UARTDR                  0x07
#define UARTCR4                 0x0a
#define UARTCR5                 0x0b
#define UARTMODEM               0x0d
#define UARTPFIFO               0x10
#define UARTCFIFO               0x11
#define UARTSFIFO               0x12
#define UARTTWFIFO              0x13
#define UARTTCFIFO              0x14
#define UARTRWFIFO              0x15

#define UARTBDH_LBKDIE          0x80
#define UARTBDH_RXEDGIE         0x40
#define UARTBDH_SBR_MASK        0x1f

#define UARTCR1_LOOPS           0x80
#define UARTCR1_RSRC            0x20
#define UARTCR1_M               0x10
#define UARTCR1_WAKE            0x08
#define UARTCR1_ILT             0x04
#define UARTCR1_PE              0x02
#define UARTCR1_PT              0x01

#define UARTCR2_TIE             0x80
#define UARTCR2_TCIE            0x40
#define UARTCR2_RIE             0x20
#define UARTCR2_ILIE            0x10
#define UARTCR2_TE              0x08
#define UARTCR2_RE              0x04
#define UARTCR2_RWU             0x02
#define UARTCR2_SBK             0x01

#define UARTSR1_TDRE            0x80
#define UARTSR1_TC              0x40
#define UARTSR1_RDRF            0x20
#define UARTSR1_IDLE            0x10
#define UARTSR1_OR              0x08
#define UARTSR1_NF              0x04
#define UARTSR1_FE              0x02
#define UARTSR1_PE              0x01

#define UARTCR3_R8              0x80
#define UARTCR3_T8              0x40
#define UARTCR3_TXDIR           0x20
#define UARTCR3_TXINV           0x10
#define UARTCR3_ORIE            0x08
#define UARTCR3_NEIE            0x04
#define UARTCR3_FEIE            0x02
#define UARTCR3_PEIE            0x01

#define UARTCR4_MAEN1           0x80
#define UARTCR4_MAEN2           0x40
#define UARTCR4_M10             0x20
#define UARTCR4_BRFA_MASK       0x1f
#define UARTCR4_BRFA_OFF        0

#define UARTCR5_TDMAS           0x80
#define UARTCR5_RDMAS           0x20

#define UARTMODEM_RXRTSE        0x08
#define UARTMODEM_TXRTSPOL      0x04
#define UARTMODEM_TXRTSE        0x02
#define UARTMODEM_TXCTSE        0x01

#define UARTPFIFO_TXFE          0x80
#define UARTPFIFO_FIFOSIZE_MASK 0x7
#define UARTPFIFO_TXSIZE_OFF    4
#define UARTPFIFO_RXFE          0x08
#define UARTPFIFO_RXSIZE_OFF    0

#define UARTCFIFO_TXFLUSH       0x80
#define UARTCFIFO_RXFLUSH       0x40
#define UARTCFIFO_RXOFE         0x04
#define UARTCFIFO_TXOFE         0x02
#define UARTCFIFO_RXUFE         0x01

#define UARTSFIFO_TXEMPT        0x80
#define UARTSFIFO_RXEMPT        0x40
#define UARTSFIFO_RXOF          0x04
#define UARTSFIFO_TXOF          0x02
#define UARTSFIFO_RXUF          0x01

/* 32-bit register definition */
#define UARTBAUD                0x00
#define UARTSTAT                0x04
#define UARTCTRL                0x08
#define UARTDATA                0x0C
#define UARTMATCH               0x10
#define UARTMODIR               0x14
#define UARTFIFO                0x18
#define UARTWATER               0x1c

#define UARTBAUD_MAEN1          0x80000000
#define UARTBAUD_MAEN2          0x40000000
#define UARTBAUD_M10            0x20000000
#define UARTBAUD_TDMAE          0x00800000
#define UARTBAUD_RDMAE          0x00200000
#define UARTBAUD_MATCFG         0x00400000
#define UARTBAUD_BOTHEDGE       0x00020000
#define UARTBAUD_RESYNCDIS      0x00010000
#define UARTBAUD_LBKDIE         0x00008000
#define UARTBAUD_RXEDGIE        0x00004000
#define UARTBAUD_SBNS           0x00002000
#define UARTBAUD_SBR            0x00000000
#define UARTBAUD_SBR_MASK       0x1fff
#define UARTBAUD_OSR_MASK       0x1f
#define UARTBAUD_OSR_SHIFT      24

#define UARTSTAT_LBKDIF         0x80000000
#define UARTSTAT_RXEDGIF        0x40000000
#define UARTSTAT_MSBF           0x20000000
#define UARTSTAT_RXINV          0x10000000
#define UARTSTAT_RWUID          0x08000000
#define UARTSTAT_BRK13          0x04000000
#define UARTSTAT_LBKDE          0x02000000
#define UARTSTAT_RAF            0x01000000
#define UARTSTAT_TDRE           0x00800000
#define UARTSTAT_TC             0x00400000
#define UARTSTAT_RDRF           0x00200000
#define UARTSTAT_IDLE           0x00100000
#define UARTSTAT_OR             0x00080000
#define UARTSTAT_NF             0x00040000
#define UARTSTAT_FE             0x00020000
#define UARTSTAT_PE             0x00010000
#define UARTSTAT_MA1F           0x00008000
#define UARTSTAT_M21F           0x00004000

#define UARTCTRL_R8T9           0x80000000
#define UARTCTRL_R9T8           0x40000000
#define UARTCTRL_TXDIR          0x20000000
#define UARTCTRL_TXINV          0x10000000
#define UARTCTRL_ORIE           0x08000000
#define UARTCTRL_NEIE           0x04000000
#define UARTCTRL_FEIE           0x02000000
#define UARTCTRL_PEIE           0x01000000
#define UARTCTRL_TIE            0x00800000
#define UARTCTRL_TCIE           0x00400000
#define UARTCTRL_RIE            0x00200000
#define UARTCTRL_ILIE           0x00100000
#define UARTCTRL_TE             0x00080000
#define UARTCTRL_RE             0x00040000
#define UARTCTRL_RWU            0x00020000
#define UARTCTRL_SBK            0x00010000
#define UARTCTRL_MA1IE          0x00008000
#define UARTCTRL_MA2IE          0x00004000
#define UARTCTRL_IDLECFG        0x00000100
#define UARTCTRL_LOOPS          0x00000080
#define UARTCTRL_DOZEEN         0x00000040
#define UARTCTRL_RSRC           0x00000020
#define UARTCTRL_M              0x00000010
#define UARTCTRL_WAKE           0x00000008
#define UARTCTRL_ILT            0x00000004
#define UARTCTRL_PE             0x00000002
#define UARTCTRL_PT             0x00000001

#define UARTDATA_NOISY          0x00008000
#define UARTDATA_PARITYE        0x00004000
#define UARTDATA_FRETSC         0x00002000
#define UARTDATA_RXEMPT         0x00001000
#define UARTDATA_IDLINE         0x00000800
#define UARTDATA_MASK           0x3ff

#define UARTMODIR_IREN          0x00020000
#define UARTMODIR_TXCTSSRC      0x00000020
#define UARTMODIR_TXCTSC        0x00000010
#define UARTMODIR_RXRTSE        0x00000008
#define UARTMODIR_TXRTSPOL      0x00000004
#define UARTMODIR_TXRTSE        0x00000002
#define UARTMODIR_TXCTSE        0x00000001

#define UARTFIFO_TXEMPT         0x00800000
#define UARTFIFO_RXEMPT         0x00400000
#define UARTFIFO_TXOF           0x00020000
#define UARTFIFO_RXUF           0x00010000
#define UARTFIFO_TXFLUSH        0x00008000
#define UARTFIFO_RXFLUSH        0x00004000
#define UARTFIFO_TXOFE          0x00000200
#define UARTFIFO_RXUFE          0x00000100
#define UARTFIFO_TXFE           0x00000080
#define UARTFIFO_FIFOSIZE_MASK  0x7
#define UARTFIFO_TXSIZE_OFF     4
#define UARTFIFO_RXFE           0x00000008
#define UARTFIFO_RXSIZE_OFF     0
#define UARTFIFO_DEPTH(x)       (0x1 << ((x) ? ((x) + 1) : 0))

#define UARTWATER_COUNT_MASK    0xff
#define UARTWATER_TXCNT_OFF     8
#define UARTWATER_RXCNT_OFF     24
#define UARTWATER_WATER_MASK    0xff
#define UARTWATER_TXWATER_OFF   0
#define UARTWATER_RXWATER_OFF   16

/* Rx DMA timeout in ms, which is used to calculate Rx ring buffer size */
#define DMA_RX_TIMEOUT          (10)

#define DRIVER_NAME     "fsl-lpuart"
#define DEV_NAME        "ttyLP"
#define UART_NR         6

/* IMX lpuart has four extra unused regs located at the beginning */
#define IMX_REG_OFF     0x10

static DEFINE_IDA(fsl_lpuart_ida);

enum lpuart_type {
        VF610_LPUART,
        LS1021A_LPUART,
        LS1028A_LPUART,
        IMX7ULP_LPUART,
        IMX8QXP_LPUART,
};

struct lpuart_port {
        struct uart_port        port;
        enum lpuart_type        devtype;
        struct clk              *ipg_clk;
        struct clk              *baud_clk;
        unsigned int            txfifo_size;
        unsigned int            rxfifo_size;

        bool                    lpuart_dma_tx_use;
        bool                    lpuart_dma_rx_use;
        struct dma_chan         *dma_tx_chan;
        struct dma_chan         *dma_rx_chan;
        struct dma_async_tx_descriptor  *dma_tx_desc;
        struct dma_async_tx_descriptor  *dma_rx_desc;
        dma_cookie_t            dma_tx_cookie;
        dma_cookie_t            dma_rx_cookie;
        unsigned int            dma_tx_bytes;
        unsigned int            dma_rx_bytes;
        bool                    dma_tx_in_progress;
        unsigned int            dma_rx_timeout;
        struct timer_list       lpuart_timer;
        struct scatterlist      rx_sgl, tx_sgl[2];
        struct circ_buf         rx_ring;
        int                     rx_dma_rng_buf_len;
        unsigned int            dma_tx_nents;
        wait_queue_head_t       dma_wait;
        bool                    id_allocated;
};

struct lpuart_soc_data {
        enum lpuart_type devtype;
        char iotype;
        u8 reg_off;
};

static const struct lpuart_soc_data vf_data = {
        .devtype = VF610_LPUART,
        .iotype = UPIO_MEM,
};

static const struct lpuart_soc_data ls1021a_data = {
        .devtype = LS1021A_LPUART,
        .iotype = UPIO_MEM32BE,
};

static const struct lpuart_soc_data ls1028a_data = {
        .devtype = LS1028A_LPUART,
        .iotype = UPIO_MEM32,
};

static struct lpuart_soc_data imx7ulp_data = {
        .devtype = IMX7ULP_LPUART,
        .iotype = UPIO_MEM32,
        .reg_off = IMX_REG_OFF,
};

static struct lpuart_soc_data imx8qxp_data = {
        .devtype = IMX8QXP_LPUART,
        .iotype = UPIO_MEM32,
        .reg_off = IMX_REG_OFF,
};

static const struct of_device_id lpuart_dt_ids[] = {
        { .compatible = "fsl,vf610-lpuart",     .data = &vf_data, },
        { .compatible = "fsl,ls1021a-lpuart",   .data = &ls1021a_data, },
        { .compatible = "fsl,ls1028a-lpuart",   .data = &ls1028a_data, },
        { .compatible = "fsl,imx7ulp-lpuart",   .data = &imx7ulp_data, },
        { .compatible = "fsl,imx8qxp-lpuart",   .data = &imx8qxp_data, },
        { /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, lpuart_dt_ids);

/* Forward declare this for the dma callbacks*/
static void lpuart_dma_tx_complete(void *arg);

static inline bool is_layerscape_lpuart(struct lpuart_port *sport)
{
        return (sport->devtype == LS1021A_LPUART ||
                sport->devtype == LS1028A_LPUART);
}

static inline bool is_imx8qxp_lpuart(struct lpuart_port *sport)
{
        return sport->devtype == IMX8QXP_LPUART;
}

static inline u32 lpuart32_read(struct uart_port *port, u32 off)
{
        switch (port->iotype) {
        case UPIO_MEM32:
                return readl(port->membase + off);
        case UPIO_MEM32BE:
                return ioread32be(port->membase + off);
        default:
                return 0;
        }
}

static inline void lpuart32_write(struct uart_port *port, u32 val,
                                  u32 off)
{
        switch (port->iotype) {
        case UPIO_MEM32:
                writel(val, port->membase + off);
                break;
        case UPIO_MEM32BE:
                iowrite32be(val, port->membase + off);
                break;
        }
}

static int __lpuart_enable_clks(struct lpuart_port *sport, bool is_en)
{
        int ret = 0;

        if (is_en) {
                ret = clk_prepare_enable(sport->ipg_clk);
                if (ret)
                        return ret;

                ret = clk_prepare_enable(sport->baud_clk);
                if (ret) {
                        clk_disable_unprepare(sport->ipg_clk);
                        return ret;
                }
        } else {
                clk_disable_unprepare(sport->baud_clk);
                clk_disable_unprepare(sport->ipg_clk);
        }

        return 0;
}

static unsigned int lpuart_get_baud_clk_rate(struct lpuart_port *sport)
{
        if (is_imx8qxp_lpuart(sport))
                return clk_get_rate(sport->baud_clk);

        return clk_get_rate(sport->ipg_clk);
}

#define lpuart_enable_clks(x)   __lpuart_enable_clks(x, true)
#define lpuart_disable_clks(x)  __lpuart_enable_clks(x, false)

static void lpuart_stop_tx(struct uart_port *port)
{
        unsigned char temp;

        temp = readb(port->membase + UARTCR2);
        temp &= ~(UARTCR2_TIE | UARTCR2_TCIE);
        writeb(temp, port->membase + UARTCR2);
}

static void lpuart32_stop_tx(struct uart_port *port)
{
        unsigned long temp;

        temp = lpuart32_read(port, UARTCTRL);
        temp &= ~(UARTCTRL_TIE | UARTCTRL_TCIE);
        lpuart32_write(port, temp, UARTCTRL);
}

static void lpuart_stop_rx(struct uart_port *port)
{
        unsigned char temp;

        temp = readb(port->membase + UARTCR2);
        writeb(temp & ~UARTCR2_RE, port->membase + UARTCR2);
}

static void lpuart32_stop_rx(struct uart_port *port)
{
        unsigned long temp;

        temp = lpuart32_read(port, UARTCTRL);
        lpuart32_write(port, temp & ~UARTCTRL_RE, UARTCTRL);
}

static void lpuart_dma_tx(struct lpuart_port *sport)
{
        struct circ_buf *xmit = &sport->port.state->xmit;
        struct scatterlist *sgl = sport->tx_sgl;
        struct device *dev = sport->port.dev;
        struct dma_chan *chan = sport->dma_tx_chan;
        int ret;

        if (sport->dma_tx_in_progress)
                return;

        sport->dma_tx_bytes = uart_circ_chars_pending(xmit);

        if (xmit->tail < xmit->head || xmit->head == 0) {
                sport->dma_tx_nents = 1;
                sg_init_one(sgl, xmit->buf + xmit->tail, sport->dma_tx_bytes);
        } else {
                sport->dma_tx_nents = 2;
                sg_init_table(sgl, 2);
                sg_set_buf(sgl, xmit->buf + xmit->tail,
                                UART_XMIT_SIZE - xmit->tail);
                sg_set_buf(sgl + 1, xmit->buf, xmit->head);
        }

        ret = dma_map_sg(chan->device->dev, sgl, sport->dma_tx_nents,
                         DMA_TO_DEVICE);
        if (!ret) {
                dev_err(dev, "DMA mapping error for TX.\n");
                return;
        }

        sport->dma_tx_desc = dmaengine_prep_slave_sg(chan, sgl,
                                        ret, DMA_MEM_TO_DEV,
                                        DMA_PREP_INTERRUPT);
        if (!sport->dma_tx_desc) {
                dma_unmap_sg(chan->device->dev, sgl, sport->dma_tx_nents,
                              DMA_TO_DEVICE);
                dev_err(dev, "Cannot prepare TX slave DMA!\n");
                return;
        }

        sport->dma_tx_desc->callback = lpuart_dma_tx_complete;
        sport->dma_tx_desc->callback_param = sport;
        sport->dma_tx_in_progress = true;
        sport->dma_tx_cookie = dmaengine_submit(sport->dma_tx_desc);
        dma_async_issue_pending(chan);
}

static bool lpuart_stopped_or_empty(struct uart_port *port)
{
        return uart_circ_empty(&port->state->xmit) || uart_tx_stopped(port);
}

static void lpuart_dma_tx_complete(void *arg)
{
        struct lpuart_port *sport = arg;
        struct scatterlist *sgl = &sport->tx_sgl[0];
        struct circ_buf *xmit = &sport->port.state->xmit;
        struct dma_chan *chan = sport->dma_tx_chan;
        unsigned long flags;

        spin_lock_irqsave(&sport->port.lock, flags);

        dma_unmap_sg(chan->device->dev, sgl, sport->dma_tx_nents,
                     DMA_TO_DEVICE);

        xmit->tail = (xmit->tail + sport->dma_tx_bytes) & (UART_XMIT_SIZE - 1);

        sport->port.icount.tx += sport->dma_tx_bytes;
        sport->dma_tx_in_progress = false;
        spin_unlock_irqrestore(&sport->port.lock, flags);

        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
                uart_write_wakeup(&sport->port);

        if (waitqueue_active(&sport->dma_wait)) {
                wake_up(&sport->dma_wait);
                return;
        }

        spin_lock_irqsave(&sport->port.lock, flags);

        if (!lpuart_stopped_or_empty(&sport->port))
                lpuart_dma_tx(sport);

        spin_unlock_irqrestore(&sport->port.lock, flags);
}

static dma_addr_t lpuart_dma_datareg_addr(struct lpuart_port *sport)
{
        switch (sport->port.iotype) {
        case UPIO_MEM32:
                return sport->port.mapbase + UARTDATA;
        case UPIO_MEM32BE:
                return sport->port.mapbase + UARTDATA + sizeof(u32) - 1;
        }
        return sport->port.mapbase + UARTDR;
}

static int lpuart_dma_tx_request(struct uart_port *port)
{
        struct lpuart_port *sport = container_of(port,
                                        struct lpuart_port, port);
        struct dma_slave_config dma_tx_sconfig = {};
        int ret;

        dma_tx_sconfig.dst_addr = lpuart_dma_datareg_addr(sport);
        dma_tx_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
        dma_tx_sconfig.dst_maxburst = 1;
        dma_tx_sconfig.direction = DMA_MEM_TO_DEV;
        ret = dmaengine_slave_config(sport->dma_tx_chan, &dma_tx_sconfig);

        if (ret) {
                dev_err(sport->port.dev,
                                "DMA slave config failed, err = %d\n", ret);
                return ret;
        }

        return 0;
}

static bool lpuart_is_32(struct lpuart_port *sport)
{
        return sport->port.iotype == UPIO_MEM32 ||
               sport->port.iotype ==  UPIO_MEM32BE;
}

static void lpuart_flush_buffer(struct uart_port *port)
{
        struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
        struct dma_chan *chan = sport->dma_tx_chan;
        u32 val;

        if (sport->lpuart_dma_tx_use) {
                if (sport->dma_tx_in_progress) {
                        dma_unmap_sg(chan->device->dev, &sport->tx_sgl[0],
                                sport->dma_tx_nents, DMA_TO_DEVICE);
                        sport->dma_tx_in_progress = false;
                }
                dmaengine_terminate_all(chan);
        }

        if (lpuart_is_32(sport)) {
                val = lpuart32_read(&sport->port, UARTFIFO);
                val |= UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH;
                lpuart32_write(&sport->port, val, UARTFIFO);
        } else {
                val = readb(sport->port.membase + UARTCFIFO);
                val |= UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH;
                writeb(val, sport->port.membase + UARTCFIFO);
        }
}

static void lpuart_wait_bit_set(struct uart_port *port, unsigned int offset,
                                u8 bit)
{
        while (!(readb(port->membase + offset) & bit))
                cpu_relax();
}

static void lpuart32_wait_bit_set(struct uart_port *port, unsigned int offset,
                                  u32 bit)
{
        while (!(lpuart32_read(port, offset) & bit))
                cpu_relax();
}

#if defined(CONFIG_CONSOLE_POLL)

static int lpuart_poll_init(struct uart_port *port)
{
        struct lpuart_port *sport = container_of(port,
                                        struct lpuart_port, port);
        unsigned long flags;
        unsigned char temp;

        sport->port.fifosize = 0;

        spin_lock_irqsave(&sport->port.lock, flags);
        /* Disable Rx & Tx */
        writeb(0, sport->port.membase + UARTCR2);

        temp = readb(sport->port.membase + UARTPFIFO);
        /* Enable Rx and Tx FIFO */
        writeb(temp | UARTPFIFO_RXFE | UARTPFIFO_TXFE,
                        sport->port.membase + UARTPFIFO);

        /* flush Tx and Rx FIFO */
        writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH,
                        sport->port.membase + UARTCFIFO);

        /* explicitly clear RDRF */
        if (readb(sport->port.membase + UARTSR1) & UARTSR1_RDRF) {
                readb(sport->port.membase + UARTDR);
                writeb(UARTSFIFO_RXUF, sport->port.membase + UARTSFIFO);
        }

        writeb(0, sport->port.membase + UARTTWFIFO);
        writeb(1, sport->port.membase + UARTRWFIFO);

        /* Enable Rx and Tx */
        writeb(UARTCR2_RE | UARTCR2_TE, sport->port.membase + UARTCR2);
        spin_unlock_irqrestore(&sport->port.lock, flags);

        return 0;
}

static void lpuart_poll_put_char(struct uart_port *port, unsigned char c)
{
        /* drain */
        lpuart_wait_bit_set(port, UARTSR1, UARTSR1_TDRE);
        writeb(c, port->membase + UARTDR);
}

static int lpuart_poll_get_char(struct uart_port *port)
{
        if (!(readb(port->membase + UARTSR1) & UARTSR1_RDRF))
                return NO_POLL_CHAR;

        return readb(port->membase + UARTDR);
}

static int lpuart32_poll_init(struct uart_port *port)
{
        unsigned long flags;
        struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
        u32 temp;

        sport->port.fifosize = 0;

        spin_lock_irqsave(&sport->port.lock, flags);

        /* Disable Rx & Tx */
        lpuart32_write(&sport->port, 0, UARTCTRL);

        temp = lpuart32_read(&sport->port, UARTFIFO);

        /* Enable Rx and Tx FIFO */
        lpuart32_write(&sport->port, temp | UARTFIFO_RXFE | UARTFIFO_TXFE, UARTFIFO);

        /* flush Tx and Rx FIFO */
        lpuart32_write(&sport->port, UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH, UARTFIFO);

        /* explicitly clear RDRF */
        if (lpuart32_read(&sport->port, UARTSTAT) & UARTSTAT_RDRF) {
                lpuart32_read(&sport->port, UARTDATA);
                lpuart32_write(&sport->port, UARTFIFO_RXUF, UARTFIFO);
        }

        /* Enable Rx and Tx */
        lpuart32_write(&sport->port, UARTCTRL_RE | UARTCTRL_TE, UARTCTRL);
        spin_unlock_irqrestore(&sport->port.lock, flags);

        return 0;
}

static void lpuart32_poll_put_char(struct uart_port *port, unsigned char c)
{
        lpuart32_wait_bit_set(port, UARTSTAT, UARTSTAT_TDRE);
        lpuart32_write(port, c, UARTDATA);
}

static int lpuart32_poll_get_char(struct uart_port *port)
{
        if (!(lpuart32_read(port, UARTWATER) >> UARTWATER_RXCNT_OFF))
                return NO_POLL_CHAR;

        return lpuart32_read(port, UARTDATA);
}
#endif

static inline void lpuart_transmit_buffer(struct lpuart_port *sport)
{
        struct circ_buf *xmit = &sport->port.state->xmit;

        if (sport->port.x_char) {
                writeb(sport->port.x_char, sport->port.membase + UARTDR);
                sport->port.icount.tx++;
                sport->port.x_char = 0;
                return;
        }

        if (lpuart_stopped_or_empty(&sport->port)) {
                lpuart_stop_tx(&sport->port);
                return;
        }

        while (!uart_circ_empty(xmit) &&
                (readb(sport->port.membase + UARTTCFIFO) < sport->txfifo_size)) {
                writeb(xmit->buf[xmit->tail], sport->port.membase + UARTDR);
                xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
                sport->port.icount.tx++;
        }

        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
                uart_write_wakeup(&sport->port);

        if (uart_circ_empty(xmit))
                lpuart_stop_tx(&sport->port);
}

static inline void lpuart32_transmit_buffer(struct lpuart_port *sport)
{
        struct circ_buf *xmit = &sport->port.state->xmit;
        unsigned long txcnt;

        if (sport->port.x_char) {
                lpuart32_write(&sport->port, sport->port.x_char, UARTDATA);
                sport->port.icount.tx++;
                sport->port.x_char = 0;
                return;
        }

        if (lpuart_stopped_or_empty(&sport->port)) {
                lpuart32_stop_tx(&sport->port);
                return;
        }

        txcnt = lpuart32_read(&sport->port, UARTWATER);
        txcnt = txcnt >> UARTWATER_TXCNT_OFF;
        txcnt &= UARTWATER_COUNT_MASK;
        while (!uart_circ_empty(xmit) && (txcnt < sport->txfifo_size)) {
                lpuart32_write(&sport->port, xmit->buf[xmit->tail], UARTDATA);
                xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
                sport->port.icount.tx++;
                txcnt = lpuart32_read(&sport->port, UARTWATER);
                txcnt = txcnt >> UARTWATER_TXCNT_OFF;
                txcnt &= UARTWATER_COUNT_MASK;
        }

        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
                uart_write_wakeup(&sport->port);

        if (uart_circ_empty(xmit))
                lpuart32_stop_tx(&sport->port);
}

static void lpuart_start_tx(struct uart_port *port)
{
        struct lpuart_port *sport = container_of(port,
                        struct lpuart_port, port);
        unsigned char temp;

        temp = readb(port->membase + UARTCR2);
        writeb(temp | UARTCR2_TIE, port->membase + UARTCR2);

        if (sport->lpuart_dma_tx_use) {
                if (!lpuart_stopped_or_empty(port))
                        lpuart_dma_tx(sport);
        } else {
                if (readb(port->membase + UARTSR1) & UARTSR1_TDRE)
                        lpuart_transmit_buffer(sport);
        }
}

static void lpuart32_start_tx(struct uart_port *port)
{
        struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
        unsigned long temp;

        if (sport->lpuart_dma_tx_use) {
                if (!lpuart_stopped_or_empty(port))
                        lpuart_dma_tx(sport);
        } else {
                temp = lpuart32_read(port, UARTCTRL);
                lpuart32_write(port, temp | UARTCTRL_TIE, UARTCTRL);

                if (lpuart32_read(port, UARTSTAT) & UARTSTAT_TDRE)
                        lpuart32_transmit_buffer(sport);
        }
}

/* return TIOCSER_TEMT when transmitter is not busy */
static unsigned int lpuart_tx_empty(struct uart_port *port)
{
        struct lpuart_port *sport = container_of(port,
                        struct lpuart_port, port);
        unsigned char sr1 = readb(port->membase + UARTSR1);
        unsigned char sfifo = readb(port->membase + UARTSFIFO);

        if (sport->dma_tx_in_progress)
                return 0;

        if (sr1 & UARTSR1_TC && sfifo & UARTSFIFO_TXEMPT)
                return TIOCSER_TEMT;

        return 0;
}

static unsigned int lpuart32_tx_empty(struct uart_port *port)
{
        struct lpuart_port *sport = container_of(port,
                        struct lpuart_port, port);
        unsigned long stat = lpuart32_read(port, UARTSTAT);
        unsigned long sfifo = lpuart32_read(port, UARTFIFO);

        if (sport->dma_tx_in_progress)
                return 0;

        if (stat & UARTSTAT_TC && sfifo & UARTFIFO_TXEMPT)
                return TIOCSER_TEMT;

        return 0;
}

static void lpuart_txint(struct lpuart_port *sport)
{
        spin_lock(&sport->port.lock);
        lpuart_transmit_buffer(sport);
        spin_unlock(&sport->port.lock);
}

static void lpuart_rxint(struct lpuart_port *sport)
{
        unsigned int flg, ignored = 0, overrun = 0;
        struct tty_port *port = &sport->port.state->port;
        unsigned char rx, sr;

        spin_lock(&sport->port.lock);

        while (!(readb(sport->port.membase + UARTSFIFO) & UARTSFIFO_RXEMPT)) {
                flg = TTY_NORMAL;
                sport->port.icount.rx++;
                /*
                 * to clear the FE, OR, NF, FE, PE flags,
                 * read SR1 then read DR
                 */
                sr = readb(sport->port.membase + UARTSR1);
                rx = readb(sport->port.membase + UARTDR);

                if (uart_prepare_sysrq_char(&sport->port, rx))
                        continue;

                if (sr & (UARTSR1_PE | UARTSR1_OR | UARTSR1_FE)) {
                        if (sr & UARTSR1_PE)
                                sport->port.icount.parity++;
                        else if (sr & UARTSR1_FE)
                                sport->port.icount.frame++;

                        if (sr & UARTSR1_OR)
                                overrun++;

                        if (sr & sport->port.ignore_status_mask) {
                                if (++ignored > 100)
                                        goto out;
                                continue;
                        }

                        sr &= sport->port.read_status_mask;

                        if (sr & UARTSR1_PE)
                                flg = TTY_PARITY;
                        else if (sr & UARTSR1_FE)
                                flg = TTY_FRAME;

                        if (sr & UARTSR1_OR)
                                flg = TTY_OVERRUN;

                        sport->port.sysrq = 0;
                }

                tty_insert_flip_char(port, rx, flg);
        }

out:
        if (overrun) {
                sport->port.icount.overrun += overrun;

                /*
                 * Overruns cause FIFO pointers to become missaligned.
                 * Flushing the receive FIFO reinitializes the pointers.
                 */
                writeb(UARTCFIFO_RXFLUSH, sport->port.membase + UARTCFIFO);
                writeb(UARTSFIFO_RXOF, sport->port.membase + UARTSFIFO);
        }

        uart_unlock_and_check_sysrq(&sport->port);

        tty_flip_buffer_push(port);
}

static void lpuart32_txint(struct lpuart_port *sport)
{
        spin_lock(&sport->port.lock);
        lpuart32_transmit_buffer(sport);
        spin_unlock(&sport->port.lock);
}

static void lpuart32_rxint(struct lpuart_port *sport)
{
        unsigned int flg, ignored = 0;
        struct tty_port *port = &sport->port.state->port;
        unsigned long rx, sr;
        bool is_break;

        spin_lock(&sport->port.lock);

        while (!(lpuart32_read(&sport->port, UARTFIFO) & UARTFIFO_RXEMPT)) {
                flg = TTY_NORMAL;
                sport->port.icount.rx++;
                /*
                 * to clear the FE, OR, NF, FE, PE flags,
                 * read STAT then read DATA reg
                 */
                sr = lpuart32_read(&sport->port, UARTSTAT);
                rx = lpuart32_read(&sport->port, UARTDATA);
                rx &= UARTDATA_MASK;

                /*
                 * The LPUART can't distinguish between a break and a framing error,
                 * thus we assume it is a break if the received data is zero.
                 */
                is_break = (sr & UARTSTAT_FE) && !rx;

                if (is_break && uart_handle_break(&sport->port))
                        continue;

                if (uart_prepare_sysrq_char(&sport->port, rx))
                        continue;

                if (sr & (UARTSTAT_PE | UARTSTAT_OR | UARTSTAT_FE)) {
                        if (sr & UARTSTAT_PE) {
                                if (is_break)
                                        sport->port.icount.brk++;
                                else
                                        sport->port.icount.parity++;
                        } else if (sr & UARTSTAT_FE) {
                                sport->port.icount.frame++;
                        }

                        if (sr & UARTSTAT_OR)
                                sport->port.icount.overrun++;

                        if (sr & sport->port.ignore_status_mask) {
                                if (++ignored > 100)
                                        goto out;
                                continue;
                        }

                        sr &= sport->port.read_status_mask;

                        if (sr & UARTSTAT_PE) {
                                if (is_break)
                                        flg = TTY_BREAK;
                                else
                                        flg = TTY_PARITY;
                        } else if (sr & UARTSTAT_FE) {
                                flg = TTY_FRAME;
                        }

                        if (sr & UARTSTAT_OR)
                                flg = TTY_OVERRUN;
                }

                tty_insert_flip_char(port, rx, flg);
        }

out:
        uart_unlock_and_check_sysrq(&sport->port);

        tty_flip_buffer_push(port);
}

static irqreturn_t lpuart_int(int irq, void *dev_id)
{
        struct lpuart_port *sport = dev_id;
        unsigned char sts;

        sts = readb(sport->port.membase + UARTSR1);

        /* SysRq, using dma, check for linebreak by framing err. */
        if (sts & UARTSR1_FE && sport->lpuart_dma_rx_use) {
                readb(sport->port.membase + UARTDR);
                uart_handle_break(&sport->port);
                /* linebreak produces some garbage, removing it */
                writeb(UARTCFIFO_RXFLUSH, sport->port.membase + UARTCFIFO);
                return IRQ_HANDLED;
        }

        if (sts & UARTSR1_RDRF && !sport->lpuart_dma_rx_use)
                lpuart_rxint(sport);

        if (sts & UARTSR1_TDRE && !sport->lpuart_dma_tx_use)
                lpuart_txint(sport);

        return IRQ_HANDLED;
}

static irqreturn_t lpuart32_int(int irq, void *dev_id)
{
        struct lpuart_port *sport = dev_id;
        unsigned long sts, rxcount;

        sts = lpuart32_read(&sport->port, UARTSTAT);
        rxcount = lpuart32_read(&sport->port, UARTWATER);
        rxcount = rxcount >> UARTWATER_RXCNT_OFF;

        if ((sts & UARTSTAT_RDRF || rxcount > 0) && !sport->lpuart_dma_rx_use)
                lpuart32_rxint(sport);

        if ((sts & UARTSTAT_TDRE) && !sport->lpuart_dma_tx_use)
                lpuart32_txint(sport);

        lpuart32_write(&sport->port, sts, UARTSTAT);
        return IRQ_HANDLED;
}


static inline void lpuart_handle_sysrq_chars(struct uart_port *port,
                                             unsigned char *p, int count)
{
        while (count--) {
                if (*p && uart_handle_sysrq_char(port, *p))
                        return;
                p++;
        }
}

static void lpuart_handle_sysrq(struct lpuart_port *sport)
{
        struct circ_buf *ring = &sport->rx_ring;
        int count;

        if (ring->head < ring->tail) {
                count = sport->rx_sgl.length - ring->tail;
                lpuart_handle_sysrq_chars(&sport->port,
                                          ring->buf + ring->tail, count);
                ring->tail = 0;
        }

        if (ring->head > ring->tail) {
                count = ring->head - ring->tail;
                lpuart_handle_sysrq_chars(&sport->port,
                                          ring->buf + ring->tail, count);
                ring->tail = ring->head;
        }
}

static void lpuart_copy_rx_to_tty(struct lpuart_port *sport)
{
        struct tty_port *port = &sport->port.state->port;
        struct dma_tx_state state;
        enum dma_status dmastat;
        struct dma_chan *chan = sport->dma_rx_chan;
        struct circ_buf *ring = &sport->rx_ring;
        unsigned long flags;
        int count = 0;

        if (lpuart_is_32(sport)) {
                unsigned long sr = lpuart32_read(&sport->port, UARTSTAT);

                if (sr & (UARTSTAT_PE | UARTSTAT_FE)) {
                        /* Read DR to clear the error flags */
                        lpuart32_read(&sport->port, UARTDATA);

                        if (sr & UARTSTAT_PE)
                                sport->port.icount.parity++;
                        else if (sr & UARTSTAT_FE)
                                sport->port.icount.frame++;
                }
        } else {
                unsigned char sr = readb(sport->port.membase + UARTSR1);

                if (sr & (UARTSR1_PE | UARTSR1_FE)) {
                        unsigned char cr2;

                        /* Disable receiver during this operation... */
                        cr2 = readb(sport->port.membase + UARTCR2);
                        cr2 &= ~UARTCR2_RE;
                        writeb(cr2, sport->port.membase + UARTCR2);

                        /* Read DR to clear the error flags */
                        readb(sport->port.membase + UARTDR);

                        if (sr & UARTSR1_PE)
                                sport->port.icount.parity++;
                        else if (sr & UARTSR1_FE)
                                sport->port.icount.frame++;
                        /*
                         * At this point parity/framing error is
                         * cleared However, since the DMA already read
                         * the data register and we had to read it
                         * again after reading the status register to
                         * properly clear the flags, the FIFO actually
                         * underflowed... This requires a clearing of
                         * the FIFO...
                         */
                        if (readb(sport->port.membase + UARTSFIFO) &
                            UARTSFIFO_RXUF) {
                                writeb(UARTSFIFO_RXUF,
                                       sport->port.membase + UARTSFIFO);
                                writeb(UARTCFIFO_RXFLUSH,
                                       sport->port.membase + UARTCFIFO);
                        }

                        cr2 |= UARTCR2_RE;
                        writeb(cr2, sport->port.membase + UARTCR2);
                }
        }

        async_tx_ack(sport->dma_rx_desc);

        spin_lock_irqsave(&sport->port.lock, flags);

        dmastat = dmaengine_tx_status(chan, sport->dma_rx_cookie, &state);
        if (dmastat == DMA_ERROR) {
                dev_err(sport->port.dev, "Rx DMA transfer failed!\n");
                spin_unlock_irqrestore(&sport->port.lock, flags);
                return;
        }

        /* CPU claims ownership of RX DMA buffer */
        dma_sync_sg_for_cpu(chan->device->dev, &sport->rx_sgl, 1,
                            DMA_FROM_DEVICE);

        /*
         * ring->head points to the end of data already written by the DMA.
         * ring->tail points to the beginning of data to be read by the
         * framework.
         * The current transfer size should not be larger than the dma buffer
         * length.
         */
        ring->head = sport->rx_sgl.length - state.residue;
        BUG_ON(ring->head > sport->rx_sgl.length);

        /*
         * Silent handling of keys pressed in the sysrq timeframe
         */
        if (sport->port.sysrq) {
                lpuart_handle_sysrq(sport);
                goto exit;
        }

        /*
         * At this point ring->head may point to the first byte right after the
         * last byte of the dma buffer:
         * 0 <= ring->head <= sport->rx_sgl.length
         *
         * However ring->tail must always points inside the dma buffer:
         * 0 <= ring->tail <= sport->rx_sgl.length - 1
         *
         * Since we use a ring buffer, we have to handle the case
         * where head is lower than tail. In such a case, we first read from
         * tail to the end of the buffer then reset tail.
         */
        if (ring->head < ring->tail) {
                count = sport->rx_sgl.length - ring->tail;

                tty_insert_flip_string(port, ring->buf + ring->tail, count);
                ring->tail = 0;
                sport->port.icount.rx += count;
        }

        /* Finally we read data from tail to head */
        if (ring->tail < ring->head) {
                count = ring->head - ring->tail;
                tty_insert_flip_string(port, ring->buf + ring->tail, count);
                /* Wrap ring->head if needed */
                if (ring->head >= sport->rx_sgl.length)
                        ring->head = 0;
                ring->tail = ring->head;
                sport->port.icount.rx += count;
        }

exit:
        dma_sync_sg_for_device(chan->device->dev, &sport->rx_sgl, 1,
                               DMA_FROM_DEVICE);

        spin_unlock_irqrestore(&sport->port.lock, flags);

        tty_flip_buffer_push(port);
        mod_timer(&sport->lpuart_timer, jiffies + sport->dma_rx_timeout);
}

static void lpuart_dma_rx_complete(void *arg)
{
        struct lpuart_port *sport = arg;

        lpuart_copy_rx_to_tty(sport);
}

static void lpuart_timer_func(struct timer_list *t)
{
        struct lpuart_port *sport = from_timer(sport, t, lpuart_timer);

        lpuart_copy_rx_to_tty(sport);
}

static inline int lpuart_start_rx_dma(struct lpuart_port *sport)
{
        struct dma_slave_config dma_rx_sconfig = {};
        struct circ_buf *ring = &sport->rx_ring;
        int ret, nent;
        int bits, baud;
        struct tty_port *port = &sport->port.state->port;
        struct tty_struct *tty = port->tty;
        struct ktermios *termios = &tty->termios;
        struct dma_chan *chan = sport->dma_rx_chan;

        baud = tty_get_baud_rate(tty);

        bits = (termios->c_cflag & CSIZE) == CS7 ? 9 : 10;
        if (termios->c_cflag & PARENB)
                bits++;

        /*
         * Calculate length of one DMA buffer size to keep latency below
         * 10ms at any baud rate.
         */
        sport->rx_dma_rng_buf_len = (DMA_RX_TIMEOUT * baud /  bits / 1000) * 2;
        sport->rx_dma_rng_buf_len = (1 << (fls(sport->rx_dma_rng_buf_len) - 1));
        if (sport->rx_dma_rng_buf_len < 16)
                sport->rx_dma_rng_buf_len = 16;

        ring->buf = kzalloc(sport->rx_dma_rng_buf_len, GFP_ATOMIC);
        if (!ring->buf)
                return -ENOMEM;

        sg_init_one(&sport->rx_sgl, ring->buf, sport->rx_dma_rng_buf_len);
        nent = dma_map_sg(chan->device->dev, &sport->rx_sgl, 1,
                          DMA_FROM_DEVICE);

        if (!nent) {
                dev_err(sport->port.dev, "DMA Rx mapping error\n");
                return -EINVAL;
        }

        dma_rx_sconfig.src_addr = lpuart_dma_datareg_addr(sport);
        dma_rx_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
        dma_rx_sconfig.src_maxburst = 1;
        dma_rx_sconfig.direction = DMA_DEV_TO_MEM;
        ret = dmaengine_slave_config(chan, &dma_rx_sconfig);

        if (ret < 0) {
                dev_err(sport->port.dev,
                                "DMA Rx slave config failed, err = %d\n", ret);
                return ret;
        }

        sport->dma_rx_desc = dmaengine_prep_dma_cyclic(chan,
                                 sg_dma_address(&sport->rx_sgl),
                                 sport->rx_sgl.length,
                                 sport->rx_sgl.length / 2,
                                 DMA_DEV_TO_MEM,
                                 DMA_PREP_INTERRUPT);
        if (!sport->dma_rx_desc) {
                dev_err(sport->port.dev, "Cannot prepare cyclic DMA\n");
                return -EFAULT;
        }

        sport->dma_rx_desc->callback = lpuart_dma_rx_complete;
        sport->dma_rx_desc->callback_param = sport;
        sport->dma_rx_cookie = dmaengine_submit(sport->dma_rx_desc);
        dma_async_issue_pending(chan);

        if (lpuart_is_32(sport)) {
                unsigned long temp = lpuart32_read(&sport->port, UARTBAUD);

                lpuart32_write(&sport->port, temp | UARTBAUD_RDMAE, UARTBAUD);
        } else {
                writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_RDMAS,
                       sport->port.membase + UARTCR5);
        }

        return 0;
}

static void lpuart_dma_rx_free(struct uart_port *port)
{
        struct lpuart_port *sport = container_of(port,
                                        struct lpuart_port, port);
        struct dma_chan *chan = sport->dma_rx_chan;

        dmaengine_terminate_all(chan);
        dma_unmap_sg(chan->device->dev, &sport->rx_sgl, 1, DMA_FROM_DEVICE);
        kfree(sport->rx_ring.buf);
        sport->rx_ring.tail = 0;
        sport->rx_ring.head = 0;
        sport->dma_rx_desc = NULL;
        sport->dma_rx_cookie = -EINVAL;
}

static int lpuart_config_rs485(struct uart_port *port,
                        struct serial_rs485 *rs485)
{
        struct lpuart_port *sport = container_of(port,
                        struct lpuart_port, port);

        u8 modem = readb(sport->port.membase + UARTMODEM) &
                ~(UARTMODEM_TXRTSPOL | UARTMODEM_TXRTSE);
        writeb(modem, sport->port.membase + UARTMODEM);

        /* clear unsupported configurations */
        rs485->delay_rts_before_send = 0;
        rs485->delay_rts_after_send = 0;
        rs485->flags &= ~SER_RS485_RX_DURING_TX;

        if (rs485->flags & SER_RS485_ENABLED) {
                /* Enable auto RS-485 RTS mode */
                modem |= UARTMODEM_TXRTSE;

                /*
                 * RTS needs to be logic HIGH either during transfer _or_ after
                 * transfer, other variants are not supported by the hardware.
                 */

                if (!(rs485->flags & (SER_RS485_RTS_ON_SEND |
                                SER_RS485_RTS_AFTER_SEND)))
                        rs485->flags |= SER_RS485_RTS_ON_SEND;

                if (rs485->flags & SER_RS485_RTS_ON_SEND &&
                                rs485->flags & SER_RS485_RTS_AFTER_SEND)
                        rs485->flags &= ~SER_RS485_RTS_AFTER_SEND;

                /*
                 * The hardware defaults to RTS logic HIGH while transfer.
                 * Switch polarity in case RTS shall be logic HIGH
                 * after transfer.
                 * Note: UART is assumed to be active high.
                 */
                if (rs485->flags & SER_RS485_RTS_ON_SEND)
                        modem &= ~UARTMODEM_TXRTSPOL;
                else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
                        modem |= UARTMODEM_TXRTSPOL;
        }

        /* Store the new configuration */
        sport->port.rs485 = *rs485;

        writeb(modem, sport->port.membase + UARTMODEM);
        return 0;
}

static int lpuart32_config_rs485(struct uart_port *port,
                        struct serial_rs485 *rs485)
{
        struct lpuart_port *sport = container_of(port,
                        struct lpuart_port, port);

        unsigned long modem = lpuart32_read(&sport->port, UARTMODIR)
                                & ~(UARTMODEM_TXRTSPOL | UARTMODEM_TXRTSE);
        lpuart32_write(&sport->port, modem, UARTMODIR);

        /* clear unsupported configurations */
        rs485->delay_rts_before_send = 0;
        rs485->delay_rts_after_send = 0;
        rs485->flags &= ~SER_RS485_RX_DURING_TX;

        if (rs485->flags & SER_RS485_ENABLED) {
                /* Enable auto RS-485 RTS mode */
                modem |= UARTMODEM_TXRTSE;

                /*
                 * RTS needs to be logic HIGH either during transfer _or_ after
                 * transfer, other variants are not supported by the hardware.
                 */

                if (!(rs485->flags & (SER_RS485_RTS_ON_SEND |
                                SER_RS485_RTS_AFTER_SEND)))
                        rs485->flags |= SER_RS485_RTS_ON_SEND;

                if (rs485->flags & SER_RS485_RTS_ON_SEND &&
                                rs485->flags & SER_RS485_RTS_AFTER_SEND)
                        rs485->flags &= ~SER_RS485_RTS_AFTER_SEND;

                /*
                 * The hardware defaults to RTS logic HIGH while transfer.
                 * Switch polarity in case RTS shall be logic HIGH
                 * after transfer.
                 * Note: UART is assumed to be active high.
                 */
                if (rs485->flags & SER_RS485_RTS_ON_SEND)
                        modem &= ~UARTMODEM_TXRTSPOL;
                else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
                        modem |= UARTMODEM_TXRTSPOL;
        }

        /* Store the new configuration */
        sport->port.rs485 = *rs485;

        lpuart32_write(&sport->port, modem, UARTMODIR);
        return 0;
}

static unsigned int lpuart_get_mctrl(struct uart_port *port)
{
        unsigned int mctrl = 0;
        u8 reg;

        reg = readb(port->membase + UARTCR1);
        if (reg & UARTCR1_LOOPS)
                mctrl |= TIOCM_LOOP;

        return mctrl;
}

static unsigned int lpuart32_get_mctrl(struct uart_port *port)
{
        unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
        u32 reg;

        reg = lpuart32_read(port, UARTCTRL);
        if (reg & UARTCTRL_LOOPS)
                mctrl |= TIOCM_LOOP;

        return mctrl;
}

static void lpuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
        u8 reg;

        reg = readb(port->membase + UARTCR1);

        /* for internal loopback we need LOOPS=1 and RSRC=0 */
        reg &= ~(UARTCR1_LOOPS | UARTCR1_RSRC);
        if (mctrl & TIOCM_LOOP)
                reg |= UARTCR1_LOOPS;

        writeb(reg, port->membase + UARTCR1);
}

static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
        u32 reg;

        reg = lpuart32_read(port, UARTCTRL);

        /* for internal loopback we need LOOPS=1 and RSRC=0 */
        reg &= ~(UARTCTRL_LOOPS | UARTCTRL_RSRC);
        if (mctrl & TIOCM_LOOP)
                reg |= UARTCTRL_LOOPS;

        lpuart32_write(port, reg, UARTCTRL);
}

static void lpuart_break_ctl(struct uart_port *port, int break_state)
{
        unsigned char temp;

        temp = readb(port->membase + UARTCR2) & ~UARTCR2_SBK;

        if (break_state != 0)
                temp |= UARTCR2_SBK;

        writeb(temp, port->membase + UARTCR2);
}

static void lpuart32_break_ctl(struct uart_port *port, int break_state)
{
        unsigned long temp;

        temp = lpuart32_read(port, UARTCTRL) & ~UARTCTRL_SBK;

        if (break_state != 0)
                temp |= UARTCTRL_SBK;

        lpuart32_write(port, temp, UARTCTRL);
}

static void lpuart_setup_watermark(struct lpuart_port *sport)
{
        unsigned char val, cr2;
        unsigned char cr2_saved;

        cr2 = readb(sport->port.membase + UARTCR2);
        cr2_saved = cr2;
        cr2 &= ~(UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_TE |
                        UARTCR2_RIE | UARTCR2_RE);
        writeb(cr2, sport->port.membase + UARTCR2);

        val = readb(sport->port.membase + UARTPFIFO);
        writeb(val | UARTPFIFO_TXFE | UARTPFIFO_RXFE,
                        sport->port.membase + UARTPFIFO);

        /* flush Tx and Rx FIFO */
        writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH,
                        sport->port.membase + UARTCFIFO);

        /* explicitly clear RDRF */
        if (readb(sport->port.membase + UARTSR1) & UARTSR1_RDRF) {
                readb(sport->port.membase + UARTDR);
                writeb(UARTSFIFO_RXUF, sport->port.membase + UARTSFIFO);
        }

        writeb(0, sport->port.membase + UARTTWFIFO);
        writeb(1, sport->port.membase + UARTRWFIFO);

        /* Restore cr2 */
        writeb(cr2_saved, sport->port.membase + UARTCR2);
}

static void lpuart_setup_watermark_enable(struct lpuart_port *sport)
{
        unsigned char cr2;

        lpuart_setup_watermark(sport);

        cr2 = readb(sport->port.membase + UARTCR2);
        cr2 |= UARTCR2_RIE | UARTCR2_RE | UARTCR2_TE;
        writeb(cr2, sport->port.membase + UARTCR2);
}

static void lpuart32_setup_watermark(struct lpuart_port *sport)
{
        unsigned long val, ctrl;
        unsigned long ctrl_saved;

        ctrl = lpuart32_read(&sport->port, UARTCTRL);
        ctrl_saved = ctrl;
        ctrl &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_TE |
                        UARTCTRL_RIE | UARTCTRL_RE);
        lpuart32_write(&sport->port, ctrl, UARTCTRL);

        /* enable FIFO mode */
        val = lpuart32_read(&sport->port, UARTFIFO);
        val |= UARTFIFO_TXFE | UARTFIFO_RXFE;
        val |= UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH;
        lpuart32_write(&sport->port, val, UARTFIFO);

        /* set the watermark */
        val = (0x1 << UARTWATER_RXWATER_OFF) | (0x0 << UARTWATER_TXWATER_OFF);
        lpuart32_write(&sport->port, val, UARTWATER);

        /* Restore cr2 */
        lpuart32_write(&sport->port, ctrl_saved, UARTCTRL);
}

static void lpuart32_setup_watermark_enable(struct lpuart_port *sport)
{
        u32 temp;

        lpuart32_setup_watermark(sport);

        temp = lpuart32_read(&sport->port, UARTCTRL);
        temp |= UARTCTRL_RE | UARTCTRL_TE | UARTCTRL_ILIE;
        lpuart32_write(&sport->port, temp, UARTCTRL);
}

static void rx_dma_timer_init(struct lpuart_port *sport)
{
        timer_setup(&sport->lpuart_timer, lpuart_timer_func, 0);
        sport->lpuart_timer.expires = jiffies + sport->dma_rx_timeout;
        add_timer(&sport->lpuart_timer);
}

static void lpuart_request_dma(struct lpuart_port *sport)
{
        sport->dma_tx_chan = dma_request_chan(sport->port.dev, "tx");
        if (IS_ERR(sport->dma_tx_chan)) {
                dev_dbg_once(sport->port.dev,
                             "DMA tx channel request failed, operating without tx DMA (%ld)\n",
                             PTR_ERR(sport->dma_tx_chan));
                sport->dma_tx_chan = NULL;
        }

        sport->dma_rx_chan = dma_request_chan(sport->port.dev, "rx");
        if (IS_ERR(sport->dma_rx_chan)) {
                dev_dbg_once(sport->port.dev,
                             "DMA rx channel request failed, operating without rx DMA (%ld)\n",
                             PTR_ERR(sport->dma_rx_chan));
                sport->dma_rx_chan = NULL;
        }
}

static void lpuart_tx_dma_startup(struct lpuart_port *sport)
{
        u32 uartbaud;
        int ret;

        if (uart_console(&sport->port))
                goto err;

        if (!sport->dma_tx_chan)
                goto err;

        ret = lpuart_dma_tx_request(&sport->port);
        if (ret)
                goto err;

        init_waitqueue_head(&sport->dma_wait);
        sport->lpuart_dma_tx_use = true;
        if (lpuart_is_32(sport)) {
                uartbaud = lpuart32_read(&sport->port, UARTBAUD);
                lpuart32_write(&sport->port,
                               uartbaud | UARTBAUD_TDMAE, UARTBAUD);
        } else {
                writeb(readb(sport->port.membase + UARTCR5) |
                       UARTCR5_TDMAS, sport->port.membase + UARTCR5);
        }

        return;

err:
        sport->lpuart_dma_tx_use = false;
}

static void lpuart_rx_dma_startup(struct lpuart_port *sport)
{
        int ret;
        unsigned char cr3;

        if (uart_console(&sport->port))
                goto err;

        if (!sport->dma_rx_chan)
                goto err;

        ret = lpuart_start_rx_dma(sport);
        if (ret)
                goto err;

        /* set Rx DMA timeout */
        sport->dma_rx_timeout = msecs_to_jiffies(DMA_RX_TIMEOUT);
        if (!sport->dma_rx_timeout)
                sport->dma_rx_timeout = 1;

        sport->lpuart_dma_rx_use = true;
        rx_dma_timer_init(sport);

        if (sport->port.has_sysrq && !lpuart_is_32(sport)) {
                cr3 = readb(sport->port.membase + UARTCR3);
                cr3 |= UARTCR3_FEIE;
                writeb(cr3, sport->port.membase + UARTCR3);
        }

        return;

err:
        sport->lpuart_dma_rx_use = false;
}

static int lpuart_startup(struct uart_port *port)
{
        struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
        unsigned long flags;
        unsigned char temp;

        /* determine FIFO size and enable FIFO mode */
        temp = readb(sport->port.membase + UARTPFIFO);

        sport->txfifo_size = UARTFIFO_DEPTH((temp >> UARTPFIFO_TXSIZE_OFF) &
                                            UARTPFIFO_FIFOSIZE_MASK);
        sport->port.fifosize = sport->txfifo_size;

        sport->rxfifo_size = UARTFIFO_DEPTH((temp >> UARTPFIFO_RXSIZE_OFF) &
                                            UARTPFIFO_FIFOSIZE_MASK);

        lpuart_request_dma(sport);

        spin_lock_irqsave(&sport->port.lock, flags);

        lpuart_setup_watermark_enable(sport);

        lpuart_rx_dma_startup(sport);
        lpuart_tx_dma_startup(sport);

        spin_unlock_irqrestore(&sport->port.lock, flags);

        return 0;
}

static void lpuart32_configure(struct lpuart_port *sport)
{
        unsigned long temp;

        if (sport->lpuart_dma_rx_use) {
                /* RXWATER must be 0 */
                temp = lpuart32_read(&sport->port, UARTWATER);
                temp &= ~(UARTWATER_WATER_MASK << UARTWATER_RXWATER_OFF);
                lpuart32_write(&sport->port, temp, UARTWATER);
        }
        temp = lpuart32_read(&sport->port, UARTCTRL);
        if (!sport->lpuart_dma_rx_use)
                temp |= UARTCTRL_RIE;
        if (!sport->lpuart_dma_tx_use)
                temp |= UARTCTRL_TIE;
        lpuart32_write(&sport->port, temp, UARTCTRL);
}

static int lpuart32_startup(struct uart_port *port)
{
        struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
        unsigned long flags;
        unsigned long temp;

        /* determine FIFO size */
        temp = lpuart32_read(&sport->port, UARTFIFO);

        sport->txfifo_size = UARTFIFO_DEPTH((temp >> UARTFIFO_TXSIZE_OFF) &
                                            UARTFIFO_FIFOSIZE_MASK);
        sport->port.fifosize = sport->txfifo_size;

        sport->rxfifo_size = UARTFIFO_DEPTH((temp >> UARTFIFO_RXSIZE_OFF) &
                                            UARTFIFO_FIFOSIZE_MASK);

        /*
         * The LS1021A and LS1028A have a fixed FIFO depth of 16 words.
         * Although they support the RX/TXSIZE fields, their encoding is
         * different. Eg the reference manual states 0b101 is 16 words.
         */
        if (is_layerscape_lpuart(sport)) {
                sport->rxfifo_size = 16;
                sport->txfifo_size = 16;
                sport->port.fifosize = sport->txfifo_size;
        }

        lpuart_request_dma(sport);

        spin_lock_irqsave(&sport->port.lock, flags);

        lpuart32_setup_watermark_enable(sport);

        lpuart_rx_dma_startup(sport);
        lpuart_tx_dma_startup(sport);

        lpuart32_configure(sport);

        spin_unlock_irqrestore(&sport->port.lock, flags);
        return 0;
}

static void lpuart_dma_shutdown(struct lpuart_port *sport)
{
        if (sport->lpuart_dma_rx_use) {
                del_timer_sync(&sport->lpuart_timer);
                lpuart_dma_rx_free(&sport->port);
        }

        if (sport->lpuart_dma_tx_use) {
                if (wait_event_interruptible(sport->dma_wait,
                        !sport->dma_tx_in_progress) != false) {
                        sport->dma_tx_in_progress = false;
                        dmaengine_terminate_all(sport->dma_tx_chan);
                }
        }

        if (sport->dma_tx_chan)
                dma_release_channel(sport->dma_tx_chan);
        if (sport->dma_rx_chan)
                dma_release_channel(sport->dma_rx_chan);
}

static void lpuart_shutdown(struct uart_port *port)
{
        struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
        unsigned char temp;
        unsigned long flags;

        spin_lock_irqsave(&port->lock, flags);

        /* disable Rx/Tx and interrupts */
        temp = readb(port->membase + UARTCR2);
        temp &= ~(UARTCR2_TE | UARTCR2_RE |
                        UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_RIE);
        writeb(temp, port->membase + UARTCR2);

        spin_unlock_irqrestore(&port->lock, flags);

        lpuart_dma_shutdown(sport);
}

static void lpuart32_shutdown(struct uart_port *port)
{
        struct lpuart_port *sport =
                container_of(port, struct lpuart_port, port);
        unsigned long temp;
        unsigned long flags;

        spin_lock_irqsave(&port->lock, flags);

        /* disable Rx/Tx and interrupts */
        temp = lpuart32_read(port, UARTCTRL);
        temp &= ~(UARTCTRL_TE | UARTCTRL_RE |
                        UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE);
        lpuart32_write(port, temp, UARTCTRL);

        spin_unlock_irqrestore(&port->lock, flags);

        lpuart_dma_shutdown(sport);
}

static void
lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
                   struct ktermios *old)
{
        struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
        unsigned long flags;
        unsigned char cr1, old_cr1, old_cr2, cr3, cr4, bdh, modem;
        unsigned int  baud;
        unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
        unsigned int sbr, brfa;

        cr1 = old_cr1 = readb(sport->port.membase + UARTCR1);
        old_cr2 = readb(sport->port.membase + UARTCR2);
        cr3 = readb(sport->port.membase + UARTCR3);
        cr4 = readb(sport->port.membase + UARTCR4);
        bdh = readb(sport->port.membase + UARTBDH);
        modem = readb(sport->port.membase + UARTMODEM);
        /*
         * only support CS8 and CS7, and for CS7 must enable PE.
         * supported mode:
         *  - (7,e/o,1)
         *  - (8,n,1)
         *  - (8,m/s,1)
         *  - (8,e/o,1)
         */
        while ((termios->c_cflag & CSIZE) != CS8 &&
                (termios->c_cflag & CSIZE) != CS7) {
                termios->c_cflag &= ~CSIZE;
                termios->c_cflag |= old_csize;
                old_csize = CS8;
        }

        if ((termios->c_cflag & CSIZE) == CS8 ||
                (termios->c_cflag & CSIZE) == CS7)
                cr1 = old_cr1 & ~UARTCR1_M;

        if (termios->c_cflag & CMSPAR) {
                if ((termios->c_cflag & CSIZE) != CS8) {
                        termios->c_cflag &= ~CSIZE;
                        termios->c_cflag |= CS8;
                }
                cr1 |= UARTCR1_M;
        }

        /*
         * When auto RS-485 RTS mode is enabled,
         * hardware flow control need to be disabled.
         */
        if (sport->port.rs485.flags & SER_RS485_ENABLED)
                termios->c_cflag &= ~CRTSCTS;

        if (termios->c_cflag & CRTSCTS)
                modem |= UARTMODEM_RXRTSE | UARTMODEM_TXCTSE;
        else
                modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);

        termios->c_cflag &= ~CSTOPB;

        /* parity must be enabled when CS7 to match 8-bits format */
        if ((termios->c_cflag & CSIZE) == CS7)
                termios->c_cflag |= PARENB;

        if (termios->c_cflag & PARENB) {
                if (termios->c_cflag & CMSPAR) {
                        cr1 &= ~UARTCR1_PE;
                        if (termios->c_cflag & PARODD)
                                cr3 |= UARTCR3_T8;
                        else
                                cr3 &= ~UARTCR3_T8;
                } else {
                        cr1 |= UARTCR1_PE;
                        if ((termios->c_cflag & CSIZE) == CS8)
                                cr1 |= UARTCR1_M;
                        if (termios->c_cflag & PARODD)
                                cr1 |= UARTCR1_PT;
                        else
                                cr1 &= ~UARTCR1_PT;
                }
        } else {
                cr1 &= ~UARTCR1_PE;
        }

        /* ask the core to calculate the divisor */
        baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);

        /*
         * Need to update the Ring buffer length according to the selected
         * baud rate and restart Rx DMA path.
         *
         * Since timer function acqures sport->port.lock, need to stop before
         * acquring same lock because otherwise del_timer_sync() can deadlock.
         */
        if (old && sport->lpuart_dma_rx_use) {
                del_timer_sync(&sport->lpuart_timer);
                lpuart_dma_rx_free(&sport->port);
        }

        spin_lock_irqsave(&sport->port.lock, flags);

        sport->port.read_status_mask = 0;
        if (termios->c_iflag & INPCK)
                sport->port.read_status_mask |= UARTSR1_FE | UARTSR1_PE;
        if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
                sport->port.read_status_mask |= UARTSR1_FE;

        /* characters to ignore */
        sport->port.ignore_status_mask = 0;
        if (termios->c_iflag & IGNPAR)
                sport->port.ignore_status_mask |= UARTSR1_PE;
        if (termios->c_iflag & IGNBRK) {
                sport->port.ignore_status_mask |= UARTSR1_FE;
                /*
                 * if we're ignoring parity and break indicators,
                 * ignore overruns too (for real raw support).
                 */
                if (termios->c_iflag & IGNPAR)
                        sport->port.ignore_status_mask |= UARTSR1_OR;
        }

        /* update the per-port timeout */
        uart_update_timeout(port, termios->c_cflag, baud);

        /* wait transmit engin complete */
        lpuart_wait_bit_set(&sport->port, UARTSR1, UARTSR1_TC);

        /* disable transmit and receive */
        writeb(old_cr2 & ~(UARTCR2_TE | UARTCR2_RE),
                        sport->port.membase + UARTCR2);

        sbr = sport->port.uartclk / (16 * baud);
        brfa = ((sport->port.uartclk - (16 * sbr * baud)) * 2) / baud;
        bdh &= ~UARTBDH_SBR_MASK;
        bdh |= (sbr >> 8) & 0x1F;
        cr4 &= ~UARTCR4_BRFA_MASK;
        brfa &= UARTCR4_BRFA_MASK;
        writeb(cr4 | brfa, sport->port.membase + UARTCR4);
        writeb(bdh, sport->port.membase + UARTBDH);
        writeb(sbr & 0xFF, sport->port.membase + UARTBDL);
        writeb(cr3, sport->port.membase + UARTCR3);
        writeb(cr1, sport->port.membase + UARTCR1);
        writeb(modem, sport->port.membase + UARTMODEM);

        /* restore control register */
        writeb(old_cr2, sport->port.membase + UARTCR2);

        if (old && sport->lpuart_dma_rx_use) {
                if (!lpuart_start_rx_dma(sport))
                        rx_dma_timer_init(sport);
                else
                        sport->lpuart_dma_rx_use = false;
        }

        spin_unlock_irqrestore(&sport->port.lock, flags);
}

static void __lpuart32_serial_setbrg(struct uart_port *port,
                                     unsigned int baudrate, bool use_rx_dma,
                                     bool use_tx_dma)
{
        u32 sbr, osr, baud_diff, tmp_osr, tmp_sbr, tmp_diff, tmp;
        u32 clk = port->uartclk;

        /*
         * The idea is to use the best OSR (over-sampling rate) possible.
         * Note, OSR is typically hard-set to 16 in other LPUART instantiations.
         * Loop to find the best OSR value possible, one that generates minimum
         * baud_diff iterate through the rest of the supported values of OSR.
         *
         * Calculation Formula:
         *  Baud Rate = baud clock / ((OSR+1) × SBR)
         */
        baud_diff = baudrate;
        osr = 0;
        sbr = 0;

        for (tmp_osr = 4; tmp_osr <= 32; tmp_osr++) {
                /* calculate the temporary sbr value  */
                tmp_sbr = (clk / (baudrate * tmp_osr));
                if (tmp_sbr == 0)
                        tmp_sbr = 1;

                /*
                 * calculate the baud rate difference based on the temporary
                 * osr and sbr values
                 */
                tmp_diff = clk / (tmp_osr * tmp_sbr) - baudrate;

                /* select best values between sbr and sbr+1 */
                tmp = clk / (tmp_osr * (tmp_sbr + 1));
                if (tmp_diff > (baudrate - tmp)) {
                        tmp_diff = baudrate - tmp;
                        tmp_sbr++;
                }

                if (tmp_sbr > UARTBAUD_SBR_MASK)
                        continue;

                if (tmp_diff <= baud_diff) {
                        baud_diff = tmp_diff;

                        osr = tmp_osr;
                        sbr = tmp_sbr;

                        if (!baud_diff)
                                break;
                }
        }

        /* handle buadrate outside acceptable rate */
        if (baud_diff > ((baudrate / 100) * 3))
                dev_warn(port->dev,
                         "unacceptable baud rate difference of more than 3%%\n");

        tmp = lpuart32_read(port, UARTBAUD);

        if ((osr > 3) && (osr < 8))
                tmp |= UARTBAUD_BOTHEDGE;

        tmp &= ~(UARTBAUD_OSR_MASK << UARTBAUD_OSR_SHIFT);
        tmp |= ((osr-1) & UARTBAUD_OSR_MASK) << UARTBAUD_OSR_SHIFT;

        tmp &= ~UARTBAUD_SBR_MASK;
        tmp |= sbr & UARTBAUD_SBR_MASK;

        if (!use_rx_dma)
                tmp &= ~UARTBAUD_RDMAE;
        if (!use_tx_dma)
                tmp &= ~UARTBAUD_TDMAE;

        lpuart32_write(port, tmp, UARTBAUD);
}

static void lpuart32_serial_setbrg(struct lpuart_port *sport,
                                   unsigned int baudrate)
{
        __lpuart32_serial_setbrg(&sport->port, baudrate,
                                 sport->lpuart_dma_rx_use,
                                 sport->lpuart_dma_tx_use);
}


static void
lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
                   struct ktermios *old)
{
        struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
        unsigned long flags;
        unsigned long ctrl, old_ctrl, modem;
        unsigned int  baud;
        unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;

        ctrl = old_ctrl = lpuart32_read(&sport->port, UARTCTRL);
        modem = lpuart32_read(&sport->port, UARTMODIR);
        /*
         * only support CS8 and CS7, and for CS7 must enable PE.
         * supported mode:
         *  - (7,e/o,1)
         *  - (8,n,1)
         *  - (8,m/s,1)
         *  - (8,e/o,1)
         */
        while ((termios->c_cflag & CSIZE) != CS8 &&
                (termios->c_cflag & CSIZE) != CS7) {
                termios->c_cflag &= ~CSIZE;
                termios->c_cflag |= old_csize;
                old_csize = CS8;
        }

        if ((termios->c_cflag & CSIZE) == CS8 ||
                (termios->c_cflag & CSIZE) == CS7)
                ctrl = old_ctrl & ~UARTCTRL_M;

        if (termios->c_cflag & CMSPAR) {
                if ((termios->c_cflag & CSIZE) != CS8) {
                        termios->c_cflag &= ~CSIZE;
                        termios->c_cflag |= CS8;
                }
                ctrl |= UARTCTRL_M;
        }

        /*
         * When auto RS-485 RTS mode is enabled,
         * hardware flow control need to be disabled.
         */
        if (sport->port.rs485.flags & SER_RS485_ENABLED)
                termios->c_cflag &= ~CRTSCTS;

        if (termios->c_cflag & CRTSCTS) {
                modem |= (UARTMODIR_RXRTSE | UARTMODIR_TXCTSE);
        } else {
                termios->c_cflag &= ~CRTSCTS;
                modem &= ~(UARTMODIR_RXRTSE | UARTMODIR_TXCTSE);
        }

        if (termios->c_cflag & CSTOPB)
                termios->c_cflag &= ~CSTOPB;

        /* parity must be enabled when CS7 to match 8-bits format */
        if ((termios->c_cflag & CSIZE) == CS7)
                termios->c_cflag |= PARENB;

        if ((termios->c_cflag & PARENB)) {
                if (termios->c_cflag & CMSPAR) {
                        ctrl &= ~UARTCTRL_PE;
                        ctrl |= UARTCTRL_M;
                } else {
                        ctrl |= UARTCTRL_PE;
                        if ((termios->c_cflag & CSIZE) == CS8)
                                ctrl |= UARTCTRL_M;
                        if (termios->c_cflag & PARODD)
                                ctrl |= UARTCTRL_PT;
                        else
                                ctrl &= ~UARTCTRL_PT;
                }
        } else {
                ctrl &= ~UARTCTRL_PE;
        }

        /* ask the core to calculate the divisor */
        baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 4);

        /*
         * Need to update the Ring buffer length according to the selected
         * baud rate and restart Rx DMA path.
         *
         * Since timer function acqures sport->port.lock, need to stop before
         * acquring same lock because otherwise del_timer_sync() can deadlock.
         */
        if (old && sport->lpuart_dma_rx_use) {
                del_timer_sync(&sport->lpuart_timer);
                lpuart_dma_rx_free(&sport->port);
        }

        spin_lock_irqsave(&sport->port.lock, flags);

        sport->port.read_status_mask = 0;
        if (termios->c_iflag & INPCK)
                sport->port.read_status_mask |= UARTSTAT_FE | UARTSTAT_PE;
        if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
                sport->port.read_status_mask |= UARTSTAT_FE;

        /* characters to ignore */
        sport->port.ignore_status_mask = 0;
        if (termios->c_iflag & IGNPAR)
                sport->port.ignore_status_mask |= UARTSTAT_PE;
        if (termios->c_iflag & IGNBRK) {
                sport->port.ignore_status_mask |= UARTSTAT_FE;
                /*
                 * if we're ignoring parity and break indicators,
                 * ignore overruns too (for real raw support).
                 */
                if (termios->c_iflag & IGNPAR)
                        sport->port.ignore_status_mask |= UARTSTAT_OR;
        }

        /* update the per-port timeout */
        uart_update_timeout(port, termios->c_cflag, baud);

        /* wait transmit engin complete */
        lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC);

        /* disable transmit and receive */
        lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE),
                       UARTCTRL);

        lpuart32_serial_setbrg(sport, baud);
        lpuart32_write(&sport->port, modem, UARTMODIR);
        lpuart32_write(&sport->port, ctrl, UARTCTRL);
        /* restore control register */

        if (old && sport->lpuart_dma_rx_use) {
                if (!lpuart_start_rx_dma(sport))
                        rx_dma_timer_init(sport);
                else
                        sport->lpuart_dma_rx_use = false;
        }

        spin_unlock_irqrestore(&sport->port.lock, flags);
}

static const char *lpuart_type(struct uart_port *port)
{
        return "FSL_LPUART";
}

static void lpuart_release_port(struct uart_port *port)
{
        /* nothing to do */
}

static int lpuart_request_port(struct uart_port *port)
{
        return  0;
}

/* configure/autoconfigure the port */
static void lpuart_config_port(struct uart_port *port, int flags)
{
        if (flags & UART_CONFIG_TYPE)
                port->type = PORT_LPUART;
}

static int lpuart_verify_port(struct uart_port *port, struct serial_struct *ser)
{
        int ret = 0;

        if (ser->type != PORT_UNKNOWN && ser->type != PORT_LPUART)
                ret = -EINVAL;
        if (port->irq != ser->irq)
                ret = -EINVAL;
        if (ser->io_type != UPIO_MEM)
                ret = -EINVAL;
        if (port->uartclk / 16 != ser->baud_base)
                ret = -EINVAL;
        if (port->iobase != ser->port)
                ret = -EINVAL;
        if (ser->hub6 != 0)
                ret = -EINVAL;
        return ret;
}

static const struct uart_ops lpuart_pops = {
        .tx_empty       = lpuart_tx_empty,
        .set_mctrl      = lpuart_set_mctrl,
        .get_mctrl      = lpuart_get_mctrl,
        .stop_tx        = lpuart_stop_tx,
        .start_tx       = lpuart_start_tx,
        .stop_rx        = lpuart_stop_rx,
        .break_ctl      = lpuart_break_ctl,
        .startup        = lpuart_startup,
        .shutdown       = lpuart_shutdown,
        .set_termios    = lpuart_set_termios,
        .type           = lpuart_type,
        .request_port   = lpuart_request_port,
        .release_port   = lpuart_release_port,
        .config_port    = lpuart_config_port,
        .verify_port    = lpuart_verify_port,
        .flush_buffer   = lpuart_flush_buffer,
#if defined(CONFIG_CONSOLE_POLL)
        .poll_init      = lpuart_poll_init,
        .poll_get_char  = lpuart_poll_get_char,
        .poll_put_char  = lpuart_poll_put_char,
#endif
};

static const struct uart_ops lpuart32_pops = {
        .tx_empty       = lpuart32_tx_empty,
        .set_mctrl      = lpuart32_set_mctrl,
        .get_mctrl      = lpuart32_get_mctrl,
        .stop_tx        = lpuart32_stop_tx,
        .start_tx       = lpuart32_start_tx,
        .stop_rx        = lpuart32_stop_rx,
        .break_ctl      = lpuart32_break_ctl,
        .startup        = lpuart32_startup,
        .shutdown       = lpuart32_shutdown,
        .set_termios    = lpuart32_set_termios,
        .type           = lpuart_type,
        .request_port   = lpuart_request_port,
        .release_port   = lpuart_release_port,
        .config_port    = lpuart_config_port,
        .verify_port    = lpuart_verify_port,
        .flush_buffer   = lpuart_flush_buffer,
#if defined(CONFIG_CONSOLE_POLL)
        .poll_init      = lpuart32_poll_init,
        .poll_get_char  = lpuart32_poll_get_char,
        .poll_put_char  = lpuart32_poll_put_char,
#endif
};

static struct lpuart_port *lpuart_ports[UART_NR];

#ifdef CONFIG_SERIAL_FSL_LPUART_CONSOLE
static void lpuart_console_putchar(struct uart_port *port, int ch)
{
        lpuart_wait_bit_set(port, UARTSR1, UARTSR1_TDRE);
        writeb(ch, port->membase + UARTDR);
}

static void lpuart32_console_putchar(struct uart_port *port, int ch)
{
        lpuart32_wait_bit_set(port, UARTSTAT, UARTSTAT_TDRE);
        lpuart32_write(port, ch, UARTDATA);
}

static void
lpuart_console_write(struct console *co, const char *s, unsigned int count)
{
        struct lpuart_port *sport = lpuart_ports[co->index];
        unsigned char  old_cr2, cr2;
        unsigned long flags;
        int locked = 1;

        if (oops_in_progress)
                locked = spin_trylock_irqsave(&sport->port.lock, flags);
        else
                spin_lock_irqsave(&sport->port.lock, flags);

        /* first save CR2 and then disable interrupts */
        cr2 = old_cr2 = readb(sport->port.membase + UARTCR2);
        cr2 |= UARTCR2_TE | UARTCR2_RE;
        cr2 &= ~(UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_RIE);
        writeb(cr2, sport->port.membase + UARTCR2);

        uart_console_write(&sport->port, s, count, lpuart_console_putchar);

        /* wait for transmitter finish complete and restore CR2 */
        lpuart_wait_bit_set(&sport->port, UARTSR1, UARTSR1_TC);

        writeb(old_cr2, sport->port.membase + UARTCR2);

        if (locked)
                spin_unlock_irqrestore(&sport->port.lock, flags);
}

static void
lpuart32_console_write(struct console *co, const char *s, unsigned int count)
{
        struct lpuart_port *sport = lpuart_ports[co->index];
        unsigned long  old_cr, cr;
        unsigned long flags;
        int locked = 1;

        if (oops_in_progress)
                locked = spin_trylock_irqsave(&sport->port.lock, flags);
        else
                spin_lock_irqsave(&sport->port.lock, flags);

        /* first save CR2 and then disable interrupts */
        cr = old_cr = lpuart32_read(&sport->port, UARTCTRL);
        cr |= UARTCTRL_TE | UARTCTRL_RE;
        cr &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE);
        lpuart32_write(&sport->port, cr, UARTCTRL);

        uart_console_write(&sport->port, s, count, lpuart32_console_putchar);

        /* wait for transmitter finish complete and restore CR2 */
        lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC);

        lpuart32_write(&sport->port, old_cr, UARTCTRL);

        if (locked)
                spin_unlock_irqrestore(&sport->port.lock, flags);
}

/*
 * if the port was already initialised (eg, by a boot loader),
 * try to determine the current setup.
 */
static void __init
lpuart_console_get_options(struct lpuart_port *sport, int *baud,
                           int *parity, int *bits)
{
        unsigned char cr, bdh, bdl, brfa;
        unsigned int sbr, uartclk, baud_raw;

        cr = readb(sport->port.membase + UARTCR2);
        cr &= UARTCR2_TE | UARTCR2_RE;
        if (!cr)
                return;

        /* ok, the port was enabled */

        cr = readb(sport->port.membase + UARTCR1);

        *parity = 'n';
        if (cr & UARTCR1_PE) {
                if (cr & UARTCR1_PT)
                        *parity = 'o';
                else
                        *parity = 'e';
        }

        if (cr & UARTCR1_M)
                *bits = 9;
        else
                *bits = 8;

        bdh = readb(sport->port.membase + UARTBDH);
        bdh &= UARTBDH_SBR_MASK;
        bdl = readb(sport->port.membase + UARTBDL);
        sbr = bdh;
        sbr <<= 8;
        sbr |= bdl;
        brfa = readb(sport->port.membase + UARTCR4);
        brfa &= UARTCR4_BRFA_MASK;

        uartclk = lpuart_get_baud_clk_rate(sport);
        /*
         * baud = mod_clk/(16*(sbr[13]+(brfa)/32)
         */
        baud_raw = uartclk / (16 * (sbr + brfa / 32));

        if (*baud != baud_raw)
                dev_info(sport->port.dev, "Serial: Console lpuart rounded baud rate"
                                "from %d to %d\n", baud_raw, *baud);
}

static void __init
lpuart32_console_get_options(struct lpuart_port *sport, int *baud,
                           int *parity, int *bits)
{
        unsigned long cr, bd;
        unsigned int sbr, uartclk, baud_raw;

        cr = lpuart32_read(&sport->port, UARTCTRL);
        cr &= UARTCTRL_TE | UARTCTRL_RE;
        if (!cr)
                return;

        /* ok, the port was enabled */

        cr = lpuart32_read(&sport->port, UARTCTRL);

        *parity = 'n';
        if (cr & UARTCTRL_PE) {
                if (cr & UARTCTRL_PT)
                        *parity = 'o';
                else
                        *parity = 'e';
        }

        if (cr & UARTCTRL_M)
                *bits = 9;
        else
                *bits = 8;

        bd = lpuart32_read(&sport->port, UARTBAUD);
        bd &= UARTBAUD_SBR_MASK;
        if (!bd)
                return;

        sbr = bd;
        uartclk = lpuart_get_baud_clk_rate(sport);
        /*
         * baud = mod_clk/(16*(sbr[13]+(brfa)/32)
         */
        baud_raw = uartclk / (16 * sbr);

        if (*baud != baud_raw)
                dev_info(sport->port.dev, "Serial: Console lpuart rounded baud rate"
                                "from %d to %d\n", baud_raw, *baud);
}

static int __init lpuart_console_setup(struct console *co, char *options)
{
        struct lpuart_port *sport;
        int baud = 115200;
        int bits = 8;
        int parity = 'n';
        int flow = 'n';

        /*
         * check whether an invalid uart number has been specified, and
         * if so, search for the first available port that does have
         * console support.
         */
        if (co->index == -1 || co->index >= ARRAY_SIZE(lpuart_ports))
                co->index = 0;

        sport = lpuart_ports[co->index];
        if (sport == NULL)
                return -ENODEV;

        if (options)
                uart_parse_options(options, &baud, &parity, &bits, &flow);
        else
                if (lpuart_is_32(sport))
                        lpuart32_console_get_options(sport, &baud, &parity, &bits);
                else
                        lpuart_console_get_options(sport, &baud, &parity, &bits);

        if (lpuart_is_32(sport))
                lpuart32_setup_watermark(sport);
        else
                lpuart_setup_watermark(sport);

        return uart_set_options(&sport->port, co, baud, parity, bits, flow);
}

static struct uart_driver lpuart_reg;
static struct console lpuart_console = {
        .name           = DEV_NAME,
        .write          = lpuart_console_write,
        .device         = uart_console_device,
        .setup          = lpuart_console_setup,
        .flags          = CON_PRINTBUFFER,
        .index          = -1,
        .data           = &lpuart_reg,
};

static struct console lpuart32_console = {
        .name           = DEV_NAME,
        .write          = lpuart32_console_write,
        .device         = uart_console_device,
        .setup          = lpuart_console_setup,
        .flags          = CON_PRINTBUFFER,
        .index          = -1,
        .data           = &lpuart_reg,
};

static void lpuart_early_write(struct console *con, const char *s, unsigned n)
{
        struct earlycon_device *dev = con->data;

        uart_console_write(&dev->port, s, n, lpuart_console_putchar);
}

static void lpuart32_early_write(struct console *con, const char *s, unsigned n)
{
        struct earlycon_device *dev = con->data;

        uart_console_write(&dev->port, s, n, lpuart32_console_putchar);
}

static int __init lpuart_early_console_setup(struct earlycon_device *device,
                                          const char *opt)
{
        if (!device->port.membase)
                return -ENODEV;

        device->con->write = lpuart_early_write;
        return 0;
}

static int __init lpuart32_early_console_setup(struct earlycon_device *device,
                                          const char *opt)
{
        if (!device->port.membase)
                return -ENODEV;

        if (device->port.iotype != UPIO_MEM32)
                device->port.iotype = UPIO_MEM32BE;

        device->con->write = lpuart32_early_write;
        return 0;
}

static int __init ls1028a_early_console_setup(struct earlycon_device *device,
                                              const char *opt)
{
        u32 cr;

        if (!device->port.membase)
                return -ENODEV;

        device->port.iotype = UPIO_MEM32;
        device->con->write = lpuart32_early_write;

        /* set the baudrate */
        if (device->port.uartclk && device->baud)
                __lpuart32_serial_setbrg(&device->port, device->baud,
                                         false, false);

        /* enable transmitter */
        cr = lpuart32_read(&device->port, UARTCTRL);
        cr |= UARTCTRL_TE;
        lpuart32_write(&device->port, cr, UARTCTRL);

        return 0;
}

static int __init lpuart32_imx_early_console_setup(struct earlycon_device *device,
                                                   const char *opt)
{
        if (!device->port.membase)
                return -ENODEV;

        device->port.iotype = UPIO_MEM32;
        device->port.membase += IMX_REG_OFF;
        device->con->write = lpuart32_early_write;

        return 0;
}
OF_EARLYCON_DECLARE(lpuart, "fsl,vf610-lpuart", lpuart_early_console_setup);
OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1021a-lpuart", lpuart32_early_console_setup);
OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1028a-lpuart", ls1028a_early_console_setup);
OF_EARLYCON_DECLARE(lpuart32, "fsl,imx7ulp-lpuart", lpuart32_imx_early_console_setup);
EARLYCON_DECLARE(lpuart, lpuart_early_console_setup);
EARLYCON_DECLARE(lpuart32, lpuart32_early_console_setup);

#define LPUART_CONSOLE  (&lpuart_console)
#define LPUART32_CONSOLE        (&lpuart32_console)
#else
#define LPUART_CONSOLE  NULL
#define LPUART32_CONSOLE        NULL
#endif

static struct uart_driver lpuart_reg = {
        .owner          = THIS_MODULE,
        .driver_name    = DRIVER_NAME,
        .dev_name       = DEV_NAME,
        .nr             = ARRAY_SIZE(lpuart_ports),
        .cons           = LPUART_CONSOLE,
};

static int lpuart_probe(struct platform_device *pdev)
{
        const struct lpuart_soc_data *sdata = of_device_get_match_data(&pdev->dev);
        struct device_node *np = pdev->dev.of_node;
        struct lpuart_port *sport;
        struct resource *res;
        int ret;

        sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
        if (!sport)
                return -ENOMEM;

        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        sport->port.membase = devm_ioremap_resource(&pdev->dev, res);
        if (IS_ERR(sport->port.membase))
                return PTR_ERR(sport->port.membase);

        sport->port.membase += sdata->reg_off;
        sport->port.mapbase = res->start;
        sport->port.dev = &pdev->dev;
        sport->port.type = PORT_LPUART;
        sport->devtype = sdata->devtype;
        ret = platform_get_irq(pdev, 0);
        if (ret < 0)
                return ret;
        sport->port.irq = ret;
        sport->port.iotype = sdata->iotype;
        if (lpuart_is_32(sport))
                sport->port.ops = &lpuart32_pops;
        else
                sport->port.ops = &lpuart_pops;
        sport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_FSL_LPUART_CONSOLE);
        sport->port.flags = UPF_BOOT_AUTOCONF;

        if (lpuart_is_32(sport))
                sport->port.rs485_config = lpuart32_config_rs485;
        else
                sport->port.rs485_config = lpuart_config_rs485;

        sport->ipg_clk = devm_clk_get(&pdev->dev, "ipg");
        if (IS_ERR(sport->ipg_clk)) {
                ret = PTR_ERR(sport->ipg_clk);
                dev_err(&pdev->dev, "failed to get uart ipg clk: %d\n", ret);
                return ret;
        }

        sport->baud_clk = NULL;
        if (is_imx8qxp_lpuart(sport)) {
                sport->baud_clk = devm_clk_get(&pdev->dev, "baud");
                if (IS_ERR(sport->baud_clk)) {
                        ret = PTR_ERR(sport->baud_clk);
                        dev_err(&pdev->dev, "failed to get uart baud clk: %d\n", ret);
                        return ret;
                }
        }

        ret = of_alias_get_id(np, "serial");
        if (ret < 0) {
                ret = ida_simple_get(&fsl_lpuart_ida, 0, UART_NR, GFP_KERNEL);
                if (ret < 0) {
                        dev_err(&pdev->dev, "port line is full, add device failed\n");
                        return ret;
                }
                sport->id_allocated = true;
        }
        if (ret >= ARRAY_SIZE(lpuart_ports)) {
                dev_err(&pdev->dev, "serial%d out of range\n", ret);
                ret = -EINVAL;
                goto failed_out_of_range;
        }
        sport->port.line = ret;

        ret = lpuart_enable_clks(sport);
        if (ret)
                goto failed_clock_enable;
        sport->port.uartclk = lpuart_get_baud_clk_rate(sport);

        lpuart_ports[sport->port.line] = sport;

        platform_set_drvdata(pdev, &sport->port);

        if (lpuart_is_32(sport)) {
                lpuart_reg.cons = LPUART32_CONSOLE;
                ret = devm_request_irq(&pdev->dev, sport->port.irq, lpuart32_int, 0,
                                        DRIVER_NAME, sport);
        } else {
                lpuart_reg.cons = LPUART_CONSOLE;
                ret = devm_request_irq(&pdev->dev, sport->port.irq, lpuart_int, 0,
                                        DRIVER_NAME, sport);
        }

        if (ret)
                goto failed_irq_request;

        ret = uart_add_one_port(&lpuart_reg, &sport->port);
        if (ret)
                goto failed_attach_port;

        ret = uart_get_rs485_mode(&sport->port);
        if (ret)
                goto failed_get_rs485;

        if (sport->port.rs485.flags & SER_RS485_RX_DURING_TX)
                dev_err(&pdev->dev, "driver doesn't support RX during TX\n");

        if (sport->port.rs485.delay_rts_before_send ||
            sport->port.rs485.delay_rts_after_send)
                dev_err(&pdev->dev, "driver doesn't support RTS delays\n");

        sport->port.rs485_config(&sport->port, &sport->port.rs485);

        return 0;

failed_get_rs485:
failed_attach_port:
failed_irq_request:
        lpuart_disable_clks(sport);
failed_clock_enable:
failed_out_of_range:
        if (sport->id_allocated)
                ida_simple_remove(&fsl_lpuart_ida, sport->port.line);
        return ret;
}

static int lpuart_remove(struct platform_device *pdev)
{
        struct lpuart_port *sport = platform_get_drvdata(pdev);

        uart_remove_one_port(&lpuart_reg, &sport->port);

        if (sport->id_allocated)
                ida_simple_remove(&fsl_lpuart_ida, sport->port.line);

        lpuart_disable_clks(sport);

        if (sport->dma_tx_chan)
                dma_release_channel(sport->dma_tx_chan);

        if (sport->dma_rx_chan)
                dma_release_channel(sport->dma_rx_chan);

        return 0;
}

static int __maybe_unused lpuart_suspend(struct device *dev)
{
        struct lpuart_port *sport = dev_get_drvdata(dev);
        unsigned long temp;
        bool irq_wake;

        if (lpuart_is_32(sport)) {
                /* disable Rx/Tx and interrupts */
                temp = lpuart32_read(&sport->port, UARTCTRL);
                temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE);
                lpuart32_write(&sport->port, temp, UARTCTRL);
        } else {
                /* disable Rx/Tx and interrupts */
                temp = readb(sport->port.membase + UARTCR2);
                temp &= ~(UARTCR2_TE | UARTCR2_TIE | UARTCR2_TCIE);
                writeb(temp, sport->port.membase + UARTCR2);
        }

        uart_suspend_port(&lpuart_reg, &sport->port);

        /* uart_suspend_port() might set wakeup flag */
        irq_wake = irqd_is_wakeup_set(irq_get_irq_data(sport->port.irq));

        if (sport->lpuart_dma_rx_use) {
                /*
                 * EDMA driver during suspend will forcefully release any
                 * non-idle DMA channels. If port wakeup is enabled or if port
                 * is console port or 'no_console_suspend' is set the Rx DMA
                 * cannot resume as as expected, hence gracefully release the
                 * Rx DMA path before suspend and start Rx DMA path on resume.
                 */
                if (irq_wake) {
                        del_timer_sync(&sport->lpuart_timer);
                        lpuart_dma_rx_free(&sport->port);
                }

                /* Disable Rx DMA to use UART port as wakeup source */
                if (lpuart_is_32(sport)) {
                        temp = lpuart32_read(&sport->port, UARTBAUD);
                        lpuart32_write(&sport->port, temp & ~UARTBAUD_RDMAE,
                                       UARTBAUD);
                } else {
                        writeb(readb(sport->port.membase + UARTCR5) &
                               ~UARTCR5_RDMAS, sport->port.membase + UARTCR5);
                }
        }

        if (sport->lpuart_dma_tx_use) {
                sport->dma_tx_in_progress = false;
                dmaengine_terminate_all(sport->dma_tx_chan);
        }

        if (sport->port.suspended && !irq_wake)
                lpuart_disable_clks(sport);

        return 0;
}

static int __maybe_unused lpuart_resume(struct device *dev)
{
        struct lpuart_port *sport = dev_get_drvdata(dev);
        bool irq_wake = irqd_is_wakeup_set(irq_get_irq_data(sport->port.irq));

        if (sport->port.suspended && !irq_wake)
                lpuart_enable_clks(sport);

        if (lpuart_is_32(sport))
                lpuart32_setup_watermark_enable(sport);
        else
                lpuart_setup_watermark_enable(sport);

        if (sport->lpuart_dma_rx_use) {
                if (irq_wake) {
                        if (!lpuart_start_rx_dma(sport))
                                rx_dma_timer_init(sport);
                        else
                                sport->lpuart_dma_rx_use = false;
                }
        }

        lpuart_tx_dma_startup(sport);

        if (lpuart_is_32(sport))
                lpuart32_configure(sport);

        uart_resume_port(&lpuart_reg, &sport->port);

        return 0;
}

static SIMPLE_DEV_PM_OPS(lpuart_pm_ops, lpuart_suspend, lpuart_resume);

static struct platform_driver lpuart_driver = {
        .probe          = lpuart_probe,
        .remove         = lpuart_remove,
        .driver         = {
                .name   = "fsl-lpuart",
                .of_match_table = lpuart_dt_ids,
                .pm     = &lpuart_pm_ops,
        },
};

static int __init lpuart_serial_init(void)
{
        int ret = uart_register_driver(&lpuart_reg);

        if (ret)
                return ret;

        ret = platform_driver_register(&lpuart_driver);
        if (ret)
                uart_unregister_driver(&lpuart_reg);

        return ret;
}

static void __exit lpuart_serial_exit(void)
{
        ida_destroy(&fsl_lpuart_ida);
        platform_driver_unregister(&lpuart_driver);
        uart_unregister_driver(&lpuart_reg);
}

module_init(lpuart_serial_init);
module_exit(lpuart_serial_exit);

MODULE_DESCRIPTION("Freescale lpuart serial port driver");
MODULE_LICENSE("GPL v2");