linux/Documentation/s390/qeth.rst
<<
>>
Prefs
   1=============================
   2IBM s390 QDIO Ethernet Driver
   3=============================
   4
   5OSA and HiperSockets Bridge Port Support
   6========================================
   7
   8Uevents
   9-------
  10
  11To generate the events the device must be assigned a role of either
  12a primary or a secondary Bridge Port. For more information, see
  13"z/VM Connectivity, SC24-6174".
  14
  15When run on an OSA or HiperSockets Bridge Capable Port hardware, and the state
  16of some configured Bridge Port device on the channel changes, a udev
  17event with ACTION=CHANGE is emitted on behalf of the corresponding
  18ccwgroup device. The event has the following attributes:
  19
  20BRIDGEPORT=statechange
  21  indicates that the Bridge Port device changed
  22  its state.
  23
  24ROLE={primary|secondary|none}
  25  the role assigned to the port.
  26
  27STATE={active|standby|inactive}
  28  the newly assumed state of the port.
  29
  30When run on HiperSockets Bridge Capable Port hardware with host address
  31notifications enabled, a udev event with ACTION=CHANGE is emitted.
  32It is emitted on behalf of the corresponding ccwgroup device when a host
  33or a VLAN is registered or unregistered on the network served by the device.
  34The event has the following attributes:
  35
  36BRIDGEDHOST={reset|register|deregister|abort}
  37  host address
  38  notifications are started afresh, a new host or VLAN is registered or
  39  deregistered on the Bridge Port HiperSockets channel, or address
  40  notifications are aborted.
  41
  42VLAN=numeric-vlan-id
  43  VLAN ID on which the event occurred. Not included
  44  if no VLAN is involved in the event.
  45
  46MAC=xx:xx:xx:xx:xx:xx
  47  MAC address of the host that is being registered
  48  or deregistered from the HiperSockets channel. Not reported if the
  49  event reports the creation or destruction of a VLAN.
  50
  51NTOK_BUSID=x.y.zzzz
  52  device bus ID (CSSID, SSID and device number).
  53
  54NTOK_IID=xx
  55  device IID.
  56
  57NTOK_CHPID=xx
  58  device CHPID.
  59
  60NTOK_CHID=xxxx
  61  device channel ID.
  62
  63Note that the `NTOK_*` attributes refer to devices other than  the one
  64connected to the system on which the OS is running.
  65