linux/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * Copyright (C) 2014-2018 The Linux Foundation. All rights reserved.
   4 * Copyright (C) 2013 Red Hat
   5 * Author: Rob Clark <robdclark@gmail.com>
   6 */
   7
   8#define pr_fmt(fmt)     "[drm:%s:%d] " fmt, __func__, __LINE__
   9
  10#include <linux/debugfs.h>
  11#include <linux/dma-buf.h>
  12
  13#include <drm/drm_atomic.h>
  14#include <drm/drm_atomic_uapi.h>
  15#include <drm/drm_damage_helper.h>
  16#include <drm/drm_file.h>
  17#include <drm/drm_gem_atomic_helper.h>
  18
  19#include "msm_drv.h"
  20#include "dpu_kms.h"
  21#include "dpu_formats.h"
  22#include "dpu_hw_sspp.h"
  23#include "dpu_trace.h"
  24#include "dpu_crtc.h"
  25#include "dpu_vbif.h"
  26#include "dpu_plane.h"
  27
  28#define DPU_DEBUG_PLANE(pl, fmt, ...) DRM_DEBUG_ATOMIC("plane%d " fmt,\
  29                (pl) ? (pl)->base.base.id : -1, ##__VA_ARGS__)
  30
  31#define DPU_ERROR_PLANE(pl, fmt, ...) DPU_ERROR("plane%d " fmt,\
  32                (pl) ? (pl)->base.base.id : -1, ##__VA_ARGS__)
  33
  34#define DECIMATED_DIMENSION(dim, deci) (((dim) + ((1 << (deci)) - 1)) >> (deci))
  35#define PHASE_STEP_SHIFT        21
  36#define PHASE_STEP_UNIT_SCALE   ((int) (1 << PHASE_STEP_SHIFT))
  37#define PHASE_RESIDUAL          15
  38
  39#define SHARP_STRENGTH_DEFAULT  32
  40#define SHARP_EDGE_THR_DEFAULT  112
  41#define SHARP_SMOOTH_THR_DEFAULT        8
  42#define SHARP_NOISE_THR_DEFAULT 2
  43
  44#define DPU_NAME_SIZE  12
  45
  46#define DPU_PLANE_COLOR_FILL_FLAG       BIT(31)
  47#define DPU_ZPOS_MAX 255
  48
  49/* multirect rect index */
  50enum {
  51        R0,
  52        R1,
  53        R_MAX
  54};
  55
  56/*
  57 * Default Preload Values
  58 */
  59#define DPU_QSEED3_DEFAULT_PRELOAD_H 0x4
  60#define DPU_QSEED3_DEFAULT_PRELOAD_V 0x3
  61#define DPU_QSEED4_DEFAULT_PRELOAD_V 0x2
  62#define DPU_QSEED4_DEFAULT_PRELOAD_H 0x4
  63
  64#define DEFAULT_REFRESH_RATE    60
  65
  66static const uint32_t qcom_compressed_supported_formats[] = {
  67        DRM_FORMAT_ABGR8888,
  68        DRM_FORMAT_ARGB8888,
  69        DRM_FORMAT_XBGR8888,
  70        DRM_FORMAT_XRGB8888,
  71        DRM_FORMAT_BGR565,
  72
  73        DRM_FORMAT_NV12,
  74};
  75
  76/**
  77 * enum dpu_plane_qos - Different qos configurations for each pipe
  78 *
  79 * @DPU_PLANE_QOS_VBLANK_CTRL: Setup VBLANK qos for the pipe.
  80 * @DPU_PLANE_QOS_VBLANK_AMORTIZE: Enables Amortization within pipe.
  81 *      this configuration is mutually exclusive from VBLANK_CTRL.
  82 * @DPU_PLANE_QOS_PANIC_CTRL: Setup panic for the pipe.
  83 */
  84enum dpu_plane_qos {
  85        DPU_PLANE_QOS_VBLANK_CTRL = BIT(0),
  86        DPU_PLANE_QOS_VBLANK_AMORTIZE = BIT(1),
  87        DPU_PLANE_QOS_PANIC_CTRL = BIT(2),
  88};
  89
  90/*
  91 * struct dpu_plane - local dpu plane structure
  92 * @aspace: address space pointer
  93 * @csc_ptr: Points to dpu_csc_cfg structure to use for current
  94 * @mplane_list: List of multirect planes of the same pipe
  95 * @catalog: Points to dpu catalog structure
  96 * @revalidate: force revalidation of all the plane properties
  97 */
  98struct dpu_plane {
  99        struct drm_plane base;
 100
 101        struct mutex lock;
 102
 103        enum dpu_sspp pipe;
 104        uint32_t features;      /* capabilities from catalog */
 105
 106        struct dpu_hw_pipe *pipe_hw;
 107        struct dpu_hw_pipe_cfg pipe_cfg;
 108        struct dpu_hw_pipe_qos_cfg pipe_qos_cfg;
 109        uint32_t color_fill;
 110        bool is_error;
 111        bool is_rt_pipe;
 112        bool is_virtual;
 113        struct list_head mplane_list;
 114        struct dpu_mdss_cfg *catalog;
 115
 116        struct dpu_csc_cfg *csc_ptr;
 117
 118        const struct dpu_sspp_sub_blks *pipe_sblk;
 119        char pipe_name[DPU_NAME_SIZE];
 120
 121        /* debugfs related stuff */
 122        struct dentry *debugfs_root;
 123        struct dpu_debugfs_regset32 debugfs_src;
 124        struct dpu_debugfs_regset32 debugfs_scaler;
 125        struct dpu_debugfs_regset32 debugfs_csc;
 126        bool debugfs_default_scale;
 127};
 128
 129static const uint64_t supported_format_modifiers[] = {
 130        DRM_FORMAT_MOD_QCOM_COMPRESSED,
 131        DRM_FORMAT_MOD_LINEAR,
 132        DRM_FORMAT_MOD_INVALID
 133};
 134
 135#define to_dpu_plane(x) container_of(x, struct dpu_plane, base)
 136
 137static struct dpu_kms *_dpu_plane_get_kms(struct drm_plane *plane)
 138{
 139        struct msm_drm_private *priv = plane->dev->dev_private;
 140
 141        return to_dpu_kms(priv->kms);
 142}
 143
 144/**
 145 * _dpu_plane_calc_bw - calculate bandwidth required for a plane
 146 * @plane: Pointer to drm plane.
 147 * @fb:   Pointer to framebuffer associated with the given plane
 148 * Result: Updates calculated bandwidth in the plane state.
 149 * BW Equation: src_w * src_h * bpp * fps * (v_total / v_dest)
 150 * Prefill BW Equation: line src bytes * line_time
 151 */
 152static void _dpu_plane_calc_bw(struct drm_plane *plane,
 153        struct drm_framebuffer *fb)
 154{
 155        struct dpu_plane *pdpu = to_dpu_plane(plane);
 156        struct dpu_plane_state *pstate;
 157        struct drm_display_mode *mode;
 158        const struct dpu_format *fmt = NULL;
 159        struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
 160        int src_width, src_height, dst_height, fps;
 161        u64 plane_prefill_bw;
 162        u64 plane_bw;
 163        u32 hw_latency_lines;
 164        u64 scale_factor;
 165        int vbp, vpw, vfp;
 166
 167        pstate = to_dpu_plane_state(plane->state);
 168        mode = &plane->state->crtc->mode;
 169
 170        fmt = dpu_get_dpu_format_ext(fb->format->format, fb->modifier);
 171
 172        src_width = drm_rect_width(&pdpu->pipe_cfg.src_rect);
 173        src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect);
 174        dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect);
 175        fps = drm_mode_vrefresh(mode);
 176        vbp = mode->vtotal - mode->vsync_end;
 177        vpw = mode->vsync_end - mode->vsync_start;
 178        vfp = mode->vsync_start - mode->vdisplay;
 179        hw_latency_lines =  dpu_kms->catalog->perf.min_prefill_lines;
 180        scale_factor = src_height > dst_height ?
 181                mult_frac(src_height, 1, dst_height) : 1;
 182
 183        plane_bw =
 184                src_width * mode->vtotal * fps * fmt->bpp *
 185                scale_factor;
 186
 187        plane_prefill_bw =
 188                src_width * hw_latency_lines * fps * fmt->bpp *
 189                scale_factor * mode->vtotal;
 190
 191        if ((vbp+vpw) > hw_latency_lines)
 192                do_div(plane_prefill_bw, (vbp+vpw));
 193        else if ((vbp+vpw+vfp) < hw_latency_lines)
 194                do_div(plane_prefill_bw, (vbp+vpw+vfp));
 195        else
 196                do_div(plane_prefill_bw, hw_latency_lines);
 197
 198
 199        pstate->plane_fetch_bw = max(plane_bw, plane_prefill_bw);
 200}
 201
 202/**
 203 * _dpu_plane_calc_clk - calculate clock required for a plane
 204 * @plane: Pointer to drm plane.
 205 * Result: Updates calculated clock in the plane state.
 206 * Clock equation: dst_w * v_total * fps * (src_h / dst_h)
 207 */
 208static void _dpu_plane_calc_clk(struct drm_plane *plane)
 209{
 210        struct dpu_plane *pdpu = to_dpu_plane(plane);
 211        struct dpu_plane_state *pstate;
 212        struct drm_display_mode *mode;
 213        int dst_width, src_height, dst_height, fps;
 214
 215        pstate = to_dpu_plane_state(plane->state);
 216        mode = &plane->state->crtc->mode;
 217
 218        src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect);
 219        dst_width = drm_rect_width(&pdpu->pipe_cfg.dst_rect);
 220        dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect);
 221        fps = drm_mode_vrefresh(mode);
 222
 223        pstate->plane_clk =
 224                dst_width * mode->vtotal * fps;
 225
 226        if (src_height > dst_height) {
 227                pstate->plane_clk *= src_height;
 228                do_div(pstate->plane_clk, dst_height);
 229        }
 230}
 231
 232/**
 233 * _dpu_plane_calc_fill_level - calculate fill level of the given source format
 234 * @plane:              Pointer to drm plane
 235 * @fmt:                Pointer to source buffer format
 236 * @src_width:          width of source buffer
 237 * Return: fill level corresponding to the source buffer/format or 0 if error
 238 */
 239static int _dpu_plane_calc_fill_level(struct drm_plane *plane,
 240                const struct dpu_format *fmt, u32 src_width)
 241{
 242        struct dpu_plane *pdpu, *tmp;
 243        struct dpu_plane_state *pstate;
 244        u32 fixed_buff_size;
 245        u32 total_fl;
 246
 247        if (!fmt || !plane->state || !src_width || !fmt->bpp) {
 248                DPU_ERROR("invalid arguments\n");
 249                return 0;
 250        }
 251
 252        pdpu = to_dpu_plane(plane);
 253        pstate = to_dpu_plane_state(plane->state);
 254        fixed_buff_size = pdpu->catalog->caps->pixel_ram_size;
 255
 256        list_for_each_entry(tmp, &pdpu->mplane_list, mplane_list) {
 257                if (!tmp->base.state->visible)
 258                        continue;
 259                DPU_DEBUG("plane%d/%d src_width:%d/%d\n",
 260                                pdpu->base.base.id, tmp->base.base.id,
 261                                src_width,
 262                                drm_rect_width(&tmp->pipe_cfg.src_rect));
 263                src_width = max_t(u32, src_width,
 264                                  drm_rect_width(&tmp->pipe_cfg.src_rect));
 265        }
 266
 267        if (fmt->fetch_planes == DPU_PLANE_PSEUDO_PLANAR) {
 268                if (fmt->chroma_sample == DPU_CHROMA_420) {
 269                        /* NV12 */
 270                        total_fl = (fixed_buff_size / 2) /
 271                                ((src_width + 32) * fmt->bpp);
 272                } else {
 273                        /* non NV12 */
 274                        total_fl = (fixed_buff_size / 2) * 2 /
 275                                ((src_width + 32) * fmt->bpp);
 276                }
 277        } else {
 278                if (pstate->multirect_mode == DPU_SSPP_MULTIRECT_PARALLEL) {
 279                        total_fl = (fixed_buff_size / 2) * 2 /
 280                                ((src_width + 32) * fmt->bpp);
 281                } else {
 282                        total_fl = (fixed_buff_size) * 2 /
 283                                ((src_width + 32) * fmt->bpp);
 284                }
 285        }
 286
 287        DPU_DEBUG_PLANE(pdpu, "pnum:%d fmt: %4.4s w:%u fl:%u\n",
 288                        pdpu->pipe - SSPP_VIG0,
 289                        (char *)&fmt->base.pixel_format,
 290                        src_width, total_fl);
 291
 292        return total_fl;
 293}
 294
 295/**
 296 * _dpu_plane_get_qos_lut - get LUT mapping based on fill level
 297 * @tbl:                Pointer to LUT table
 298 * @total_fl:           fill level
 299 * Return: LUT setting corresponding to the fill level
 300 */
 301static u64 _dpu_plane_get_qos_lut(const struct dpu_qos_lut_tbl *tbl,
 302                u32 total_fl)
 303{
 304        int i;
 305
 306        if (!tbl || !tbl->nentry || !tbl->entries)
 307                return 0;
 308
 309        for (i = 0; i < tbl->nentry; i++)
 310                if (total_fl <= tbl->entries[i].fl)
 311                        return tbl->entries[i].lut;
 312
 313        /* if last fl is zero, use as default */
 314        if (!tbl->entries[i-1].fl)
 315                return tbl->entries[i-1].lut;
 316
 317        return 0;
 318}
 319
 320/**
 321 * _dpu_plane_set_qos_lut - set QoS LUT of the given plane
 322 * @plane:              Pointer to drm plane
 323 * @fb:                 Pointer to framebuffer associated with the given plane
 324 */
 325static void _dpu_plane_set_qos_lut(struct drm_plane *plane,
 326                struct drm_framebuffer *fb)
 327{
 328        struct dpu_plane *pdpu = to_dpu_plane(plane);
 329        const struct dpu_format *fmt = NULL;
 330        u64 qos_lut;
 331        u32 total_fl = 0, lut_usage;
 332
 333        if (!pdpu->is_rt_pipe) {
 334                lut_usage = DPU_QOS_LUT_USAGE_NRT;
 335        } else {
 336                fmt = dpu_get_dpu_format_ext(
 337                                fb->format->format,
 338                                fb->modifier);
 339                total_fl = _dpu_plane_calc_fill_level(plane, fmt,
 340                                drm_rect_width(&pdpu->pipe_cfg.src_rect));
 341
 342                if (fmt && DPU_FORMAT_IS_LINEAR(fmt))
 343                        lut_usage = DPU_QOS_LUT_USAGE_LINEAR;
 344                else
 345                        lut_usage = DPU_QOS_LUT_USAGE_MACROTILE;
 346        }
 347
 348        qos_lut = _dpu_plane_get_qos_lut(
 349                        &pdpu->catalog->perf.qos_lut_tbl[lut_usage], total_fl);
 350
 351        pdpu->pipe_qos_cfg.creq_lut = qos_lut;
 352
 353        trace_dpu_perf_set_qos_luts(pdpu->pipe - SSPP_VIG0,
 354                        (fmt) ? fmt->base.pixel_format : 0,
 355                        pdpu->is_rt_pipe, total_fl, qos_lut, lut_usage);
 356
 357        DPU_DEBUG_PLANE(pdpu, "pnum:%d fmt: %4.4s rt:%d fl:%u lut:0x%llx\n",
 358                        pdpu->pipe - SSPP_VIG0,
 359                        fmt ? (char *)&fmt->base.pixel_format : NULL,
 360                        pdpu->is_rt_pipe, total_fl, qos_lut);
 361
 362        pdpu->pipe_hw->ops.setup_creq_lut(pdpu->pipe_hw, &pdpu->pipe_qos_cfg);
 363}
 364
 365/**
 366 * _dpu_plane_set_danger_lut - set danger/safe LUT of the given plane
 367 * @plane:              Pointer to drm plane
 368 * @fb:                 Pointer to framebuffer associated with the given plane
 369 */
 370static void _dpu_plane_set_danger_lut(struct drm_plane *plane,
 371                struct drm_framebuffer *fb)
 372{
 373        struct dpu_plane *pdpu = to_dpu_plane(plane);
 374        const struct dpu_format *fmt = NULL;
 375        u32 danger_lut, safe_lut;
 376
 377        if (!pdpu->is_rt_pipe) {
 378                danger_lut = pdpu->catalog->perf.danger_lut_tbl
 379                                [DPU_QOS_LUT_USAGE_NRT];
 380                safe_lut = pdpu->catalog->perf.safe_lut_tbl
 381                                [DPU_QOS_LUT_USAGE_NRT];
 382        } else {
 383                fmt = dpu_get_dpu_format_ext(
 384                                fb->format->format,
 385                                fb->modifier);
 386
 387                if (fmt && DPU_FORMAT_IS_LINEAR(fmt)) {
 388                        danger_lut = pdpu->catalog->perf.danger_lut_tbl
 389                                        [DPU_QOS_LUT_USAGE_LINEAR];
 390                        safe_lut = pdpu->catalog->perf.safe_lut_tbl
 391                                        [DPU_QOS_LUT_USAGE_LINEAR];
 392                } else {
 393                        danger_lut = pdpu->catalog->perf.danger_lut_tbl
 394                                        [DPU_QOS_LUT_USAGE_MACROTILE];
 395                        safe_lut = pdpu->catalog->perf.safe_lut_tbl
 396                                        [DPU_QOS_LUT_USAGE_MACROTILE];
 397                }
 398        }
 399
 400        pdpu->pipe_qos_cfg.danger_lut = danger_lut;
 401        pdpu->pipe_qos_cfg.safe_lut = safe_lut;
 402
 403        trace_dpu_perf_set_danger_luts(pdpu->pipe - SSPP_VIG0,
 404                        (fmt) ? fmt->base.pixel_format : 0,
 405                        (fmt) ? fmt->fetch_mode : 0,
 406                        pdpu->pipe_qos_cfg.danger_lut,
 407                        pdpu->pipe_qos_cfg.safe_lut);
 408
 409        DPU_DEBUG_PLANE(pdpu, "pnum:%d fmt: %4.4s mode:%d luts[0x%x, 0x%x]\n",
 410                pdpu->pipe - SSPP_VIG0,
 411                fmt ? (char *)&fmt->base.pixel_format : NULL,
 412                fmt ? fmt->fetch_mode : -1,
 413                pdpu->pipe_qos_cfg.danger_lut,
 414                pdpu->pipe_qos_cfg.safe_lut);
 415
 416        pdpu->pipe_hw->ops.setup_danger_safe_lut(pdpu->pipe_hw,
 417                        &pdpu->pipe_qos_cfg);
 418}
 419
 420/**
 421 * _dpu_plane_set_qos_ctrl - set QoS control of the given plane
 422 * @plane:              Pointer to drm plane
 423 * @enable:             true to enable QoS control
 424 * @flags:              QoS control mode (enum dpu_plane_qos)
 425 */
 426static void _dpu_plane_set_qos_ctrl(struct drm_plane *plane,
 427        bool enable, u32 flags)
 428{
 429        struct dpu_plane *pdpu = to_dpu_plane(plane);
 430
 431        if (flags & DPU_PLANE_QOS_VBLANK_CTRL) {
 432                pdpu->pipe_qos_cfg.creq_vblank = pdpu->pipe_sblk->creq_vblank;
 433                pdpu->pipe_qos_cfg.danger_vblank =
 434                                pdpu->pipe_sblk->danger_vblank;
 435                pdpu->pipe_qos_cfg.vblank_en = enable;
 436        }
 437
 438        if (flags & DPU_PLANE_QOS_VBLANK_AMORTIZE) {
 439                /* this feature overrules previous VBLANK_CTRL */
 440                pdpu->pipe_qos_cfg.vblank_en = false;
 441                pdpu->pipe_qos_cfg.creq_vblank = 0; /* clear vblank bits */
 442        }
 443
 444        if (flags & DPU_PLANE_QOS_PANIC_CTRL)
 445                pdpu->pipe_qos_cfg.danger_safe_en = enable;
 446
 447        if (!pdpu->is_rt_pipe) {
 448                pdpu->pipe_qos_cfg.vblank_en = false;
 449                pdpu->pipe_qos_cfg.danger_safe_en = false;
 450        }
 451
 452        DPU_DEBUG_PLANE(pdpu, "pnum:%d ds:%d vb:%d pri[0x%x, 0x%x] is_rt:%d\n",
 453                pdpu->pipe - SSPP_VIG0,
 454                pdpu->pipe_qos_cfg.danger_safe_en,
 455                pdpu->pipe_qos_cfg.vblank_en,
 456                pdpu->pipe_qos_cfg.creq_vblank,
 457                pdpu->pipe_qos_cfg.danger_vblank,
 458                pdpu->is_rt_pipe);
 459
 460        pdpu->pipe_hw->ops.setup_qos_ctrl(pdpu->pipe_hw,
 461                        &pdpu->pipe_qos_cfg);
 462}
 463
 464/**
 465 * _dpu_plane_set_ot_limit - set OT limit for the given plane
 466 * @plane:              Pointer to drm plane
 467 * @crtc:               Pointer to drm crtc
 468 */
 469static void _dpu_plane_set_ot_limit(struct drm_plane *plane,
 470                struct drm_crtc *crtc)
 471{
 472        struct dpu_plane *pdpu = to_dpu_plane(plane);
 473        struct dpu_vbif_set_ot_params ot_params;
 474        struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
 475
 476        memset(&ot_params, 0, sizeof(ot_params));
 477        ot_params.xin_id = pdpu->pipe_hw->cap->xin_id;
 478        ot_params.num = pdpu->pipe_hw->idx - SSPP_NONE;
 479        ot_params.width = drm_rect_width(&pdpu->pipe_cfg.src_rect);
 480        ot_params.height = drm_rect_height(&pdpu->pipe_cfg.src_rect);
 481        ot_params.is_wfd = !pdpu->is_rt_pipe;
 482        ot_params.frame_rate = drm_mode_vrefresh(&crtc->mode);
 483        ot_params.vbif_idx = VBIF_RT;
 484        ot_params.clk_ctrl = pdpu->pipe_hw->cap->clk_ctrl;
 485        ot_params.rd = true;
 486
 487        dpu_vbif_set_ot_limit(dpu_kms, &ot_params);
 488}
 489
 490/**
 491 * _dpu_plane_set_qos_remap - set vbif QoS for the given plane
 492 * @plane:              Pointer to drm plane
 493 */
 494static void _dpu_plane_set_qos_remap(struct drm_plane *plane)
 495{
 496        struct dpu_plane *pdpu = to_dpu_plane(plane);
 497        struct dpu_vbif_set_qos_params qos_params;
 498        struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
 499
 500        memset(&qos_params, 0, sizeof(qos_params));
 501        qos_params.vbif_idx = VBIF_RT;
 502        qos_params.clk_ctrl = pdpu->pipe_hw->cap->clk_ctrl;
 503        qos_params.xin_id = pdpu->pipe_hw->cap->xin_id;
 504        qos_params.num = pdpu->pipe_hw->idx - SSPP_VIG0;
 505        qos_params.is_rt = pdpu->is_rt_pipe;
 506
 507        DPU_DEBUG_PLANE(pdpu, "pipe:%d vbif:%d xin:%d rt:%d, clk_ctrl:%d\n",
 508                        qos_params.num,
 509                        qos_params.vbif_idx,
 510                        qos_params.xin_id, qos_params.is_rt,
 511                        qos_params.clk_ctrl);
 512
 513        dpu_vbif_set_qos_remap(dpu_kms, &qos_params);
 514}
 515
 516static void _dpu_plane_set_scanout(struct drm_plane *plane,
 517                struct dpu_plane_state *pstate,
 518                struct dpu_hw_pipe_cfg *pipe_cfg,
 519                struct drm_framebuffer *fb)
 520{
 521        struct dpu_plane *pdpu = to_dpu_plane(plane);
 522        struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
 523        struct msm_gem_address_space *aspace = kms->base.aspace;
 524        int ret;
 525
 526        ret = dpu_format_populate_layout(aspace, fb, &pipe_cfg->layout);
 527        if (ret == -EAGAIN)
 528                DPU_DEBUG_PLANE(pdpu, "not updating same src addrs\n");
 529        else if (ret)
 530                DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret);
 531        else if (pdpu->pipe_hw->ops.setup_sourceaddress) {
 532                trace_dpu_plane_set_scanout(pdpu->pipe_hw->idx,
 533                                            &pipe_cfg->layout,
 534                                            pstate->multirect_index);
 535                pdpu->pipe_hw->ops.setup_sourceaddress(pdpu->pipe_hw, pipe_cfg,
 536                                                pstate->multirect_index);
 537        }
 538}
 539
 540static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu,
 541                struct dpu_plane_state *pstate,
 542                uint32_t src_w, uint32_t src_h, uint32_t dst_w, uint32_t dst_h,
 543                struct dpu_hw_scaler3_cfg *scale_cfg,
 544                const struct dpu_format *fmt,
 545                uint32_t chroma_subsmpl_h, uint32_t chroma_subsmpl_v)
 546{
 547        uint32_t i;
 548
 549        memset(scale_cfg, 0, sizeof(*scale_cfg));
 550        memset(&pstate->pixel_ext, 0, sizeof(struct dpu_hw_pixel_ext));
 551
 552        scale_cfg->phase_step_x[DPU_SSPP_COMP_0] =
 553                mult_frac((1 << PHASE_STEP_SHIFT), src_w, dst_w);
 554        scale_cfg->phase_step_y[DPU_SSPP_COMP_0] =
 555                mult_frac((1 << PHASE_STEP_SHIFT), src_h, dst_h);
 556
 557
 558        scale_cfg->phase_step_y[DPU_SSPP_COMP_1_2] =
 559                scale_cfg->phase_step_y[DPU_SSPP_COMP_0] / chroma_subsmpl_v;
 560        scale_cfg->phase_step_x[DPU_SSPP_COMP_1_2] =
 561                scale_cfg->phase_step_x[DPU_SSPP_COMP_0] / chroma_subsmpl_h;
 562
 563        scale_cfg->phase_step_x[DPU_SSPP_COMP_2] =
 564                scale_cfg->phase_step_x[DPU_SSPP_COMP_1_2];
 565        scale_cfg->phase_step_y[DPU_SSPP_COMP_2] =
 566                scale_cfg->phase_step_y[DPU_SSPP_COMP_1_2];
 567
 568        scale_cfg->phase_step_x[DPU_SSPP_COMP_3] =
 569                scale_cfg->phase_step_x[DPU_SSPP_COMP_0];
 570        scale_cfg->phase_step_y[DPU_SSPP_COMP_3] =
 571                scale_cfg->phase_step_y[DPU_SSPP_COMP_0];
 572
 573        for (i = 0; i < DPU_MAX_PLANES; i++) {
 574                scale_cfg->src_width[i] = src_w;
 575                scale_cfg->src_height[i] = src_h;
 576                if (i == DPU_SSPP_COMP_1_2 || i == DPU_SSPP_COMP_2) {
 577                        scale_cfg->src_width[i] /= chroma_subsmpl_h;
 578                        scale_cfg->src_height[i] /= chroma_subsmpl_v;
 579                }
 580
 581                if (pdpu->pipe_hw->cap->features &
 582                        BIT(DPU_SSPP_SCALER_QSEED4)) {
 583                        scale_cfg->preload_x[i] = DPU_QSEED4_DEFAULT_PRELOAD_H;
 584                        scale_cfg->preload_y[i] = DPU_QSEED4_DEFAULT_PRELOAD_V;
 585                } else {
 586                        scale_cfg->preload_x[i] = DPU_QSEED3_DEFAULT_PRELOAD_H;
 587                        scale_cfg->preload_y[i] = DPU_QSEED3_DEFAULT_PRELOAD_V;
 588                }
 589
 590                pstate->pixel_ext.num_ext_pxls_top[i] =
 591                        scale_cfg->src_height[i];
 592                pstate->pixel_ext.num_ext_pxls_left[i] =
 593                        scale_cfg->src_width[i];
 594        }
 595        if (!(DPU_FORMAT_IS_YUV(fmt)) && (src_h == dst_h)
 596                && (src_w == dst_w))
 597                return;
 598
 599        scale_cfg->dst_width = dst_w;
 600        scale_cfg->dst_height = dst_h;
 601        scale_cfg->y_rgb_filter_cfg = DPU_SCALE_BIL;
 602        scale_cfg->uv_filter_cfg = DPU_SCALE_BIL;
 603        scale_cfg->alpha_filter_cfg = DPU_SCALE_ALPHA_BIL;
 604        scale_cfg->lut_flag = 0;
 605        scale_cfg->blend_cfg = 1;
 606        scale_cfg->enable = 1;
 607}
 608
 609static void _dpu_plane_setup_csc(struct dpu_plane *pdpu)
 610{
 611        static const struct dpu_csc_cfg dpu_csc_YUV2RGB_601L = {
 612                {
 613                        /* S15.16 format */
 614                        0x00012A00, 0x00000000, 0x00019880,
 615                        0x00012A00, 0xFFFF9B80, 0xFFFF3000,
 616                        0x00012A00, 0x00020480, 0x00000000,
 617                },
 618                /* signed bias */
 619                { 0xfff0, 0xff80, 0xff80,},
 620                { 0x0, 0x0, 0x0,},
 621                /* unsigned clamp */
 622                { 0x10, 0xeb, 0x10, 0xf0, 0x10, 0xf0,},
 623                { 0x00, 0xff, 0x00, 0xff, 0x00, 0xff,},
 624        };
 625        static const struct dpu_csc_cfg dpu_csc10_YUV2RGB_601L = {
 626                {
 627                        /* S15.16 format */
 628                        0x00012A00, 0x00000000, 0x00019880,
 629                        0x00012A00, 0xFFFF9B80, 0xFFFF3000,
 630                        0x00012A00, 0x00020480, 0x00000000,
 631                        },
 632                /* signed bias */
 633                { 0xffc0, 0xfe00, 0xfe00,},
 634                { 0x0, 0x0, 0x0,},
 635                /* unsigned clamp */
 636                { 0x40, 0x3ac, 0x40, 0x3c0, 0x40, 0x3c0,},
 637                { 0x00, 0x3ff, 0x00, 0x3ff, 0x00, 0x3ff,},
 638        };
 639
 640        if (!pdpu) {
 641                DPU_ERROR("invalid plane\n");
 642                return;
 643        }
 644
 645        if (BIT(DPU_SSPP_CSC_10BIT) & pdpu->features)
 646                pdpu->csc_ptr = (struct dpu_csc_cfg *)&dpu_csc10_YUV2RGB_601L;
 647        else
 648                pdpu->csc_ptr = (struct dpu_csc_cfg *)&dpu_csc_YUV2RGB_601L;
 649
 650        DPU_DEBUG_PLANE(pdpu, "using 0x%X 0x%X 0x%X...\n",
 651                        pdpu->csc_ptr->csc_mv[0],
 652                        pdpu->csc_ptr->csc_mv[1],
 653                        pdpu->csc_ptr->csc_mv[2]);
 654}
 655
 656static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu,
 657                struct dpu_plane_state *pstate,
 658                const struct dpu_format *fmt, bool color_fill)
 659{
 660        const struct drm_format_info *info = drm_format_info(fmt->base.pixel_format);
 661
 662        /* don't chroma subsample if decimating */
 663        /* update scaler. calculate default config for QSEED3 */
 664        _dpu_plane_setup_scaler3(pdpu, pstate,
 665                        drm_rect_width(&pdpu->pipe_cfg.src_rect),
 666                        drm_rect_height(&pdpu->pipe_cfg.src_rect),
 667                        drm_rect_width(&pdpu->pipe_cfg.dst_rect),
 668                        drm_rect_height(&pdpu->pipe_cfg.dst_rect),
 669                        &pstate->scaler3_cfg, fmt,
 670                        info->hsub, info->vsub);
 671}
 672
 673/**
 674 * _dpu_plane_color_fill - enables color fill on plane
 675 * @pdpu:   Pointer to DPU plane object
 676 * @color:  RGB fill color value, [23..16] Blue, [15..8] Green, [7..0] Red
 677 * @alpha:  8-bit fill alpha value, 255 selects 100% alpha
 678 * Returns: 0 on success
 679 */
 680static int _dpu_plane_color_fill(struct dpu_plane *pdpu,
 681                uint32_t color, uint32_t alpha)
 682{
 683        const struct dpu_format *fmt;
 684        const struct drm_plane *plane = &pdpu->base;
 685        struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
 686
 687        DPU_DEBUG_PLANE(pdpu, "\n");
 688
 689        /*
 690         * select fill format to match user property expectation,
 691         * h/w only supports RGB variants
 692         */
 693        fmt = dpu_get_dpu_format(DRM_FORMAT_ABGR8888);
 694
 695        /* update sspp */
 696        if (fmt && pdpu->pipe_hw->ops.setup_solidfill) {
 697                pdpu->pipe_hw->ops.setup_solidfill(pdpu->pipe_hw,
 698                                (color & 0xFFFFFF) | ((alpha & 0xFF) << 24),
 699                                pstate->multirect_index);
 700
 701                /* override scaler/decimation if solid fill */
 702                pdpu->pipe_cfg.src_rect.x1 = 0;
 703                pdpu->pipe_cfg.src_rect.y1 = 0;
 704                pdpu->pipe_cfg.src_rect.x2 =
 705                        drm_rect_width(&pdpu->pipe_cfg.dst_rect);
 706                pdpu->pipe_cfg.src_rect.y2 =
 707                        drm_rect_height(&pdpu->pipe_cfg.dst_rect);
 708                _dpu_plane_setup_scaler(pdpu, pstate, fmt, true);
 709
 710                if (pdpu->pipe_hw->ops.setup_format)
 711                        pdpu->pipe_hw->ops.setup_format(pdpu->pipe_hw,
 712                                        fmt, DPU_SSPP_SOLID_FILL,
 713                                        pstate->multirect_index);
 714
 715                if (pdpu->pipe_hw->ops.setup_rects)
 716                        pdpu->pipe_hw->ops.setup_rects(pdpu->pipe_hw,
 717                                        &pdpu->pipe_cfg,
 718                                        pstate->multirect_index);
 719
 720                if (pdpu->pipe_hw->ops.setup_pe)
 721                        pdpu->pipe_hw->ops.setup_pe(pdpu->pipe_hw,
 722                                        &pstate->pixel_ext);
 723
 724                if (pdpu->pipe_hw->ops.setup_scaler &&
 725                                pstate->multirect_index != DPU_SSPP_RECT_1)
 726                        pdpu->pipe_hw->ops.setup_scaler(pdpu->pipe_hw,
 727                                        &pdpu->pipe_cfg, &pstate->pixel_ext,
 728                                        &pstate->scaler3_cfg);
 729        }
 730
 731        return 0;
 732}
 733
 734void dpu_plane_clear_multirect(const struct drm_plane_state *drm_state)
 735{
 736        struct dpu_plane_state *pstate = to_dpu_plane_state(drm_state);
 737
 738        pstate->multirect_index = DPU_SSPP_RECT_SOLO;
 739        pstate->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
 740}
 741
 742int dpu_plane_validate_multirect_v2(struct dpu_multirect_plane_states *plane)
 743{
 744        struct dpu_plane_state *pstate[R_MAX];
 745        const struct drm_plane_state *drm_state[R_MAX];
 746        struct drm_rect src[R_MAX], dst[R_MAX];
 747        struct dpu_plane *dpu_plane[R_MAX];
 748        const struct dpu_format *fmt[R_MAX];
 749        int i, buffer_lines;
 750        unsigned int max_tile_height = 1;
 751        bool parallel_fetch_qualified = true;
 752        bool has_tiled_rect = false;
 753
 754        for (i = 0; i < R_MAX; i++) {
 755                const struct msm_format *msm_fmt;
 756
 757                drm_state[i] = i ? plane->r1 : plane->r0;
 758                msm_fmt = msm_framebuffer_format(drm_state[i]->fb);
 759                fmt[i] = to_dpu_format(msm_fmt);
 760
 761                if (DPU_FORMAT_IS_UBWC(fmt[i])) {
 762                        has_tiled_rect = true;
 763                        if (fmt[i]->tile_height > max_tile_height)
 764                                max_tile_height = fmt[i]->tile_height;
 765                }
 766        }
 767
 768        for (i = 0; i < R_MAX; i++) {
 769                int width_threshold;
 770
 771                pstate[i] = to_dpu_plane_state(drm_state[i]);
 772                dpu_plane[i] = to_dpu_plane(drm_state[i]->plane);
 773
 774                if (pstate[i] == NULL) {
 775                        DPU_ERROR("DPU plane state of plane id %d is NULL\n",
 776                                drm_state[i]->plane->base.id);
 777                        return -EINVAL;
 778                }
 779
 780                src[i].x1 = drm_state[i]->src_x >> 16;
 781                src[i].y1 = drm_state[i]->src_y >> 16;
 782                src[i].x2 = src[i].x1 + (drm_state[i]->src_w >> 16);
 783                src[i].y2 = src[i].y1 + (drm_state[i]->src_h >> 16);
 784
 785                dst[i] = drm_plane_state_dest(drm_state[i]);
 786
 787                if (drm_rect_calc_hscale(&src[i], &dst[i], 1, 1) != 1 ||
 788                    drm_rect_calc_vscale(&src[i], &dst[i], 1, 1) != 1) {
 789                        DPU_ERROR_PLANE(dpu_plane[i],
 790                                "scaling is not supported in multirect mode\n");
 791                        return -EINVAL;
 792                }
 793
 794                if (DPU_FORMAT_IS_YUV(fmt[i])) {
 795                        DPU_ERROR_PLANE(dpu_plane[i],
 796                                "Unsupported format for multirect mode\n");
 797                        return -EINVAL;
 798                }
 799
 800                /**
 801                 * SSPP PD_MEM is split half - one for each RECT.
 802                 * Tiled formats need 5 lines of buffering while fetching
 803                 * whereas linear formats need only 2 lines.
 804                 * So we cannot support more than half of the supported SSPP
 805                 * width for tiled formats.
 806                 */
 807                width_threshold = dpu_plane[i]->catalog->caps->max_linewidth;
 808                if (has_tiled_rect)
 809                        width_threshold /= 2;
 810
 811                if (parallel_fetch_qualified &&
 812                    drm_rect_width(&src[i]) > width_threshold)
 813                        parallel_fetch_qualified = false;
 814
 815        }
 816
 817        /* Validate RECT's and set the mode */
 818
 819        /* Prefer PARALLEL FETCH Mode over TIME_MX Mode */
 820        if (parallel_fetch_qualified) {
 821                pstate[R0]->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
 822                pstate[R1]->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
 823
 824                goto done;
 825        }
 826
 827        /* TIME_MX Mode */
 828        buffer_lines = 2 * max_tile_height;
 829
 830        if (dst[R1].y1 >= dst[R0].y2 + buffer_lines ||
 831            dst[R0].y1 >= dst[R1].y2 + buffer_lines) {
 832                pstate[R0]->multirect_mode = DPU_SSPP_MULTIRECT_TIME_MX;
 833                pstate[R1]->multirect_mode = DPU_SSPP_MULTIRECT_TIME_MX;
 834        } else {
 835                DPU_ERROR(
 836                        "No multirect mode possible for the planes (%d - %d)\n",
 837                        drm_state[R0]->plane->base.id,
 838                        drm_state[R1]->plane->base.id);
 839                return -EINVAL;
 840        }
 841
 842done:
 843        if (dpu_plane[R0]->is_virtual) {
 844                pstate[R0]->multirect_index = DPU_SSPP_RECT_1;
 845                pstate[R1]->multirect_index = DPU_SSPP_RECT_0;
 846        } else {
 847                pstate[R0]->multirect_index = DPU_SSPP_RECT_0;
 848                pstate[R1]->multirect_index = DPU_SSPP_RECT_1;
 849        }
 850
 851        DPU_DEBUG_PLANE(dpu_plane[R0], "R0: %d - %d\n",
 852                pstate[R0]->multirect_mode, pstate[R0]->multirect_index);
 853        DPU_DEBUG_PLANE(dpu_plane[R1], "R1: %d - %d\n",
 854                pstate[R1]->multirect_mode, pstate[R1]->multirect_index);
 855        return 0;
 856}
 857
 858/**
 859 * dpu_plane_get_ctl_flush - get control flush for the given plane
 860 * @plane: Pointer to drm plane structure
 861 * @ctl: Pointer to hardware control driver
 862 * @flush_sspp: Pointer to sspp flush control word
 863 */
 864void dpu_plane_get_ctl_flush(struct drm_plane *plane, struct dpu_hw_ctl *ctl,
 865                u32 *flush_sspp)
 866{
 867        *flush_sspp = ctl->ops.get_bitmask_sspp(ctl, dpu_plane_pipe(plane));
 868}
 869
 870static int dpu_plane_prepare_fb(struct drm_plane *plane,
 871                struct drm_plane_state *new_state)
 872{
 873        struct drm_framebuffer *fb = new_state->fb;
 874        struct dpu_plane *pdpu = to_dpu_plane(plane);
 875        struct dpu_plane_state *pstate = to_dpu_plane_state(new_state);
 876        struct dpu_hw_fmt_layout layout;
 877        struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
 878        int ret;
 879
 880        if (!new_state->fb)
 881                return 0;
 882
 883        DPU_DEBUG_PLANE(pdpu, "FB[%u]\n", fb->base.id);
 884
 885        /* cache aspace */
 886        pstate->aspace = kms->base.aspace;
 887
 888        /*
 889         * TODO: Need to sort out the msm_framebuffer_prepare() call below so
 890         *       we can use msm_atomic_prepare_fb() instead of doing the
 891         *       implicit fence and fb prepare by hand here.
 892         */
 893        drm_gem_plane_helper_prepare_fb(plane, new_state);
 894
 895        if (pstate->aspace) {
 896                ret = msm_framebuffer_prepare(new_state->fb,
 897                                pstate->aspace);
 898                if (ret) {
 899                        DPU_ERROR("failed to prepare framebuffer\n");
 900                        return ret;
 901                }
 902        }
 903
 904        /* validate framebuffer layout before commit */
 905        ret = dpu_format_populate_layout(pstate->aspace,
 906                        new_state->fb, &layout);
 907        if (ret) {
 908                DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret);
 909                return ret;
 910        }
 911
 912        return 0;
 913}
 914
 915static void dpu_plane_cleanup_fb(struct drm_plane *plane,
 916                struct drm_plane_state *old_state)
 917{
 918        struct dpu_plane *pdpu = to_dpu_plane(plane);
 919        struct dpu_plane_state *old_pstate;
 920
 921        if (!old_state || !old_state->fb)
 922                return;
 923
 924        old_pstate = to_dpu_plane_state(old_state);
 925
 926        DPU_DEBUG_PLANE(pdpu, "FB[%u]\n", old_state->fb->base.id);
 927
 928        msm_framebuffer_cleanup(old_state->fb, old_pstate->aspace);
 929}
 930
 931static bool dpu_plane_validate_src(struct drm_rect *src,
 932                                   struct drm_rect *fb_rect,
 933                                   uint32_t min_src_size)
 934{
 935        /* Ensure fb size is supported */
 936        if (drm_rect_width(fb_rect) > MAX_IMG_WIDTH ||
 937            drm_rect_height(fb_rect) > MAX_IMG_HEIGHT)
 938                return false;
 939
 940        /* Ensure src rect is above the minimum size */
 941        if (drm_rect_width(src) < min_src_size ||
 942            drm_rect_height(src) < min_src_size)
 943                return false;
 944
 945        /* Ensure src is fully encapsulated in fb */
 946        return drm_rect_intersect(fb_rect, src) &&
 947                drm_rect_equals(fb_rect, src);
 948}
 949
 950static int dpu_plane_atomic_check(struct drm_plane *plane,
 951                                  struct drm_atomic_state *state)
 952{
 953        struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
 954                                                                                 plane);
 955        int ret = 0, min_scale;
 956        struct dpu_plane *pdpu = to_dpu_plane(plane);
 957        struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
 958        const struct drm_crtc_state *crtc_state = NULL;
 959        const struct dpu_format *fmt;
 960        struct drm_rect src, dst, fb_rect = { 0 };
 961        uint32_t min_src_size, max_linewidth;
 962
 963        if (new_plane_state->crtc)
 964                crtc_state = drm_atomic_get_new_crtc_state(state,
 965                                                           new_plane_state->crtc);
 966
 967        min_scale = FRAC_16_16(1, pdpu->pipe_sblk->maxupscale);
 968        ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
 969                                                  min_scale,
 970                                                  pdpu->pipe_sblk->maxdwnscale << 16,
 971                                                  true, true);
 972        if (ret) {
 973                DPU_DEBUG_PLANE(pdpu, "Check plane state failed (%d)\n", ret);
 974                return ret;
 975        }
 976        if (!new_plane_state->visible)
 977                return 0;
 978
 979        src.x1 = new_plane_state->src_x >> 16;
 980        src.y1 = new_plane_state->src_y >> 16;
 981        src.x2 = src.x1 + (new_plane_state->src_w >> 16);
 982        src.y2 = src.y1 + (new_plane_state->src_h >> 16);
 983
 984        dst = drm_plane_state_dest(new_plane_state);
 985
 986        fb_rect.x2 = new_plane_state->fb->width;
 987        fb_rect.y2 = new_plane_state->fb->height;
 988
 989        max_linewidth = pdpu->catalog->caps->max_linewidth;
 990
 991        fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
 992
 993        min_src_size = DPU_FORMAT_IS_YUV(fmt) ? 2 : 1;
 994
 995        if (DPU_FORMAT_IS_YUV(fmt) &&
 996                (!(pdpu->features & DPU_SSPP_SCALER) ||
 997                 !(pdpu->features & (BIT(DPU_SSPP_CSC)
 998                 | BIT(DPU_SSPP_CSC_10BIT))))) {
 999                DPU_DEBUG_PLANE(pdpu,
1000                                "plane doesn't have scaler/csc for yuv\n");
1001                return -EINVAL;
1002
1003        /* check src bounds */
1004        } else if (!dpu_plane_validate_src(&src, &fb_rect, min_src_size)) {
1005                DPU_DEBUG_PLANE(pdpu, "invalid source " DRM_RECT_FMT "\n",
1006                                DRM_RECT_ARG(&src));
1007                return -E2BIG;
1008
1009        /* valid yuv image */
1010        } else if (DPU_FORMAT_IS_YUV(fmt) &&
1011                   (src.x1 & 0x1 || src.y1 & 0x1 ||
1012                    drm_rect_width(&src) & 0x1 ||
1013                    drm_rect_height(&src) & 0x1)) {
1014                DPU_DEBUG_PLANE(pdpu, "invalid yuv source " DRM_RECT_FMT "\n",
1015                                DRM_RECT_ARG(&src));
1016                return -EINVAL;
1017
1018        /* min dst support */
1019        } else if (drm_rect_width(&dst) < 0x1 || drm_rect_height(&dst) < 0x1) {
1020                DPU_DEBUG_PLANE(pdpu, "invalid dest rect " DRM_RECT_FMT "\n",
1021                                DRM_RECT_ARG(&dst));
1022                return -EINVAL;
1023
1024        /* check decimated source width */
1025        } else if (drm_rect_width(&src) > max_linewidth) {
1026                DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
1027                                DRM_RECT_ARG(&src), max_linewidth);
1028                return -E2BIG;
1029        }
1030
1031        pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
1032
1033        return 0;
1034}
1035
1036void dpu_plane_flush(struct drm_plane *plane)
1037{
1038        struct dpu_plane *pdpu;
1039        struct dpu_plane_state *pstate;
1040
1041        if (!plane || !plane->state) {
1042                DPU_ERROR("invalid plane\n");
1043                return;
1044        }
1045
1046        pdpu = to_dpu_plane(plane);
1047        pstate = to_dpu_plane_state(plane->state);
1048
1049        /*
1050         * These updates have to be done immediately before the plane flush
1051         * timing, and may not be moved to the atomic_update/mode_set functions.
1052         */
1053        if (pdpu->is_error)
1054                /* force white frame with 100% alpha pipe output on error */
1055                _dpu_plane_color_fill(pdpu, 0xFFFFFF, 0xFF);
1056        else if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG)
1057                /* force 100% alpha */
1058                _dpu_plane_color_fill(pdpu, pdpu->color_fill, 0xFF);
1059        else if (pdpu->pipe_hw && pdpu->csc_ptr && pdpu->pipe_hw->ops.setup_csc)
1060                pdpu->pipe_hw->ops.setup_csc(pdpu->pipe_hw, pdpu->csc_ptr);
1061
1062        /* flag h/w flush complete */
1063        if (plane->state)
1064                pstate->pending = false;
1065}
1066
1067/**
1068 * dpu_plane_set_error: enable/disable error condition
1069 * @plane: pointer to drm_plane structure
1070 * @error: error value to set
1071 */
1072void dpu_plane_set_error(struct drm_plane *plane, bool error)
1073{
1074        struct dpu_plane *pdpu;
1075
1076        if (!plane)
1077                return;
1078
1079        pdpu = to_dpu_plane(plane);
1080        pdpu->is_error = error;
1081}
1082
1083static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
1084{
1085        uint32_t src_flags;
1086        struct dpu_plane *pdpu = to_dpu_plane(plane);
1087        struct drm_plane_state *state = plane->state;
1088        struct dpu_plane_state *pstate = to_dpu_plane_state(state);
1089        struct drm_crtc *crtc = state->crtc;
1090        struct drm_framebuffer *fb = state->fb;
1091        bool is_rt_pipe, update_qos_remap;
1092        const struct dpu_format *fmt =
1093                to_dpu_format(msm_framebuffer_format(fb));
1094
1095        memset(&(pdpu->pipe_cfg), 0, sizeof(struct dpu_hw_pipe_cfg));
1096
1097        _dpu_plane_set_scanout(plane, pstate, &pdpu->pipe_cfg, fb);
1098
1099        pstate->pending = true;
1100
1101        is_rt_pipe = (dpu_crtc_get_client_type(crtc) != NRT_CLIENT);
1102        _dpu_plane_set_qos_ctrl(plane, false, DPU_PLANE_QOS_PANIC_CTRL);
1103
1104        DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT
1105                        ", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src),
1106                        crtc->base.id, DRM_RECT_ARG(&state->dst),
1107                        (char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt));
1108
1109        pdpu->pipe_cfg.src_rect = state->src;
1110
1111        /* state->src is 16.16, src_rect is not */
1112        pdpu->pipe_cfg.src_rect.x1 >>= 16;
1113        pdpu->pipe_cfg.src_rect.x2 >>= 16;
1114        pdpu->pipe_cfg.src_rect.y1 >>= 16;
1115        pdpu->pipe_cfg.src_rect.y2 >>= 16;
1116
1117        pdpu->pipe_cfg.dst_rect = state->dst;
1118
1119        _dpu_plane_setup_scaler(pdpu, pstate, fmt, false);
1120
1121        /* override for color fill */
1122        if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG) {
1123                /* skip remaining processing on color fill */
1124                return;
1125        }
1126
1127        if (pdpu->pipe_hw->ops.setup_rects) {
1128                pdpu->pipe_hw->ops.setup_rects(pdpu->pipe_hw,
1129                                &pdpu->pipe_cfg,
1130                                pstate->multirect_index);
1131        }
1132
1133        if (pdpu->pipe_hw->ops.setup_pe &&
1134                        (pstate->multirect_index != DPU_SSPP_RECT_1))
1135                pdpu->pipe_hw->ops.setup_pe(pdpu->pipe_hw,
1136                                &pstate->pixel_ext);
1137
1138        /**
1139         * when programmed in multirect mode, scalar block will be
1140         * bypassed. Still we need to update alpha and bitwidth
1141         * ONLY for RECT0
1142         */
1143        if (pdpu->pipe_hw->ops.setup_scaler &&
1144                        pstate->multirect_index != DPU_SSPP_RECT_1)
1145                pdpu->pipe_hw->ops.setup_scaler(pdpu->pipe_hw,
1146                                &pdpu->pipe_cfg, &pstate->pixel_ext,
1147                                &pstate->scaler3_cfg);
1148
1149        if (pdpu->pipe_hw->ops.setup_multirect)
1150                pdpu->pipe_hw->ops.setup_multirect(
1151                                pdpu->pipe_hw,
1152                                pstate->multirect_index,
1153                                pstate->multirect_mode);
1154
1155        if (pdpu->pipe_hw->ops.setup_format) {
1156                unsigned int rotation;
1157
1158                src_flags = 0x0;
1159
1160                rotation = drm_rotation_simplify(state->rotation,
1161                                                 DRM_MODE_ROTATE_0 |
1162                                                 DRM_MODE_REFLECT_X |
1163                                                 DRM_MODE_REFLECT_Y);
1164
1165                if (rotation & DRM_MODE_REFLECT_X)
1166                        src_flags |= DPU_SSPP_FLIP_LR;
1167
1168                if (rotation & DRM_MODE_REFLECT_Y)
1169                        src_flags |= DPU_SSPP_FLIP_UD;
1170
1171                /* update format */
1172                pdpu->pipe_hw->ops.setup_format(pdpu->pipe_hw, fmt, src_flags,
1173                                pstate->multirect_index);
1174
1175                if (pdpu->pipe_hw->ops.setup_cdp) {
1176                        struct dpu_hw_pipe_cdp_cfg *cdp_cfg = &pstate->cdp_cfg;
1177
1178                        memset(cdp_cfg, 0, sizeof(struct dpu_hw_pipe_cdp_cfg));
1179
1180                        cdp_cfg->enable = pdpu->catalog->perf.cdp_cfg
1181                                        [DPU_PERF_CDP_USAGE_RT].rd_enable;
1182                        cdp_cfg->ubwc_meta_enable =
1183                                        DPU_FORMAT_IS_UBWC(fmt);
1184                        cdp_cfg->tile_amortize_enable =
1185                                        DPU_FORMAT_IS_UBWC(fmt) ||
1186                                        DPU_FORMAT_IS_TILE(fmt);
1187                        cdp_cfg->preload_ahead = DPU_SSPP_CDP_PRELOAD_AHEAD_64;
1188
1189                        pdpu->pipe_hw->ops.setup_cdp(pdpu->pipe_hw, cdp_cfg);
1190                }
1191
1192                /* update csc */
1193                if (DPU_FORMAT_IS_YUV(fmt))
1194                        _dpu_plane_setup_csc(pdpu);
1195                else
1196                        pdpu->csc_ptr = NULL;
1197        }
1198
1199        _dpu_plane_set_qos_lut(plane, fb);
1200        _dpu_plane_set_danger_lut(plane, fb);
1201
1202        if (plane->type != DRM_PLANE_TYPE_CURSOR) {
1203                _dpu_plane_set_qos_ctrl(plane, true, DPU_PLANE_QOS_PANIC_CTRL);
1204                _dpu_plane_set_ot_limit(plane, crtc);
1205        }
1206
1207        update_qos_remap = (is_rt_pipe != pdpu->is_rt_pipe) ||
1208                        pstate->needs_qos_remap;
1209
1210        if (update_qos_remap) {
1211                if (is_rt_pipe != pdpu->is_rt_pipe)
1212                        pdpu->is_rt_pipe = is_rt_pipe;
1213                else if (pstate->needs_qos_remap)
1214                        pstate->needs_qos_remap = false;
1215                _dpu_plane_set_qos_remap(plane);
1216        }
1217
1218        _dpu_plane_calc_bw(plane, fb);
1219
1220        _dpu_plane_calc_clk(plane);
1221}
1222
1223static void _dpu_plane_atomic_disable(struct drm_plane *plane)
1224{
1225        struct dpu_plane *pdpu = to_dpu_plane(plane);
1226        struct drm_plane_state *state = plane->state;
1227        struct dpu_plane_state *pstate = to_dpu_plane_state(state);
1228
1229        trace_dpu_plane_disable(DRMID(plane), is_dpu_plane_virtual(plane),
1230                                pstate->multirect_mode);
1231
1232        pstate->pending = true;
1233
1234        if (is_dpu_plane_virtual(plane) &&
1235                        pdpu->pipe_hw && pdpu->pipe_hw->ops.setup_multirect)
1236                pdpu->pipe_hw->ops.setup_multirect(pdpu->pipe_hw,
1237                                DPU_SSPP_RECT_SOLO, DPU_SSPP_MULTIRECT_NONE);
1238}
1239
1240static void dpu_plane_atomic_update(struct drm_plane *plane,
1241                                struct drm_atomic_state *state)
1242{
1243        struct dpu_plane *pdpu = to_dpu_plane(plane);
1244        struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state,
1245                                                                           plane);
1246
1247        pdpu->is_error = false;
1248
1249        DPU_DEBUG_PLANE(pdpu, "\n");
1250
1251        if (!new_state->visible) {
1252                _dpu_plane_atomic_disable(plane);
1253        } else {
1254                dpu_plane_sspp_atomic_update(plane);
1255        }
1256}
1257
1258static void dpu_plane_destroy(struct drm_plane *plane)
1259{
1260        struct dpu_plane *pdpu = plane ? to_dpu_plane(plane) : NULL;
1261
1262        DPU_DEBUG_PLANE(pdpu, "\n");
1263
1264        if (pdpu) {
1265                _dpu_plane_set_qos_ctrl(plane, false, DPU_PLANE_QOS_PANIC_CTRL);
1266
1267                mutex_destroy(&pdpu->lock);
1268
1269                /* this will destroy the states as well */
1270                drm_plane_cleanup(plane);
1271
1272                dpu_hw_sspp_destroy(pdpu->pipe_hw);
1273
1274                kfree(pdpu);
1275        }
1276}
1277
1278static void dpu_plane_destroy_state(struct drm_plane *plane,
1279                struct drm_plane_state *state)
1280{
1281        __drm_atomic_helper_plane_destroy_state(state);
1282        kfree(to_dpu_plane_state(state));
1283}
1284
1285static struct drm_plane_state *
1286dpu_plane_duplicate_state(struct drm_plane *plane)
1287{
1288        struct dpu_plane *pdpu;
1289        struct dpu_plane_state *pstate;
1290        struct dpu_plane_state *old_state;
1291
1292        if (!plane) {
1293                DPU_ERROR("invalid plane\n");
1294                return NULL;
1295        } else if (!plane->state) {
1296                DPU_ERROR("invalid plane state\n");
1297                return NULL;
1298        }
1299
1300        old_state = to_dpu_plane_state(plane->state);
1301        pdpu = to_dpu_plane(plane);
1302        pstate = kmemdup(old_state, sizeof(*old_state), GFP_KERNEL);
1303        if (!pstate) {
1304                DPU_ERROR_PLANE(pdpu, "failed to allocate state\n");
1305                return NULL;
1306        }
1307
1308        DPU_DEBUG_PLANE(pdpu, "\n");
1309
1310        pstate->pending = false;
1311
1312        __drm_atomic_helper_plane_duplicate_state(plane, &pstate->base);
1313
1314        return &pstate->base;
1315}
1316
1317static void dpu_plane_reset(struct drm_plane *plane)
1318{
1319        struct dpu_plane *pdpu;
1320        struct dpu_plane_state *pstate;
1321
1322        if (!plane) {
1323                DPU_ERROR("invalid plane\n");
1324                return;
1325        }
1326
1327        pdpu = to_dpu_plane(plane);
1328        DPU_DEBUG_PLANE(pdpu, "\n");
1329
1330        /* remove previous state, if present */
1331        if (plane->state) {
1332                dpu_plane_destroy_state(plane, plane->state);
1333                plane->state = NULL;
1334        }
1335
1336        pstate = kzalloc(sizeof(*pstate), GFP_KERNEL);
1337        if (!pstate) {
1338                DPU_ERROR_PLANE(pdpu, "failed to allocate state\n");
1339                return;
1340        }
1341
1342        __drm_atomic_helper_plane_reset(plane, &pstate->base);
1343}
1344
1345#ifdef CONFIG_DEBUG_FS
1346static void dpu_plane_danger_signal_ctrl(struct drm_plane *plane, bool enable)
1347{
1348        struct dpu_plane *pdpu = to_dpu_plane(plane);
1349        struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
1350
1351        if (!pdpu->is_rt_pipe)
1352                return;
1353
1354        pm_runtime_get_sync(&dpu_kms->pdev->dev);
1355        _dpu_plane_set_qos_ctrl(plane, enable, DPU_PLANE_QOS_PANIC_CTRL);
1356        pm_runtime_put_sync(&dpu_kms->pdev->dev);
1357}
1358
1359static ssize_t _dpu_plane_danger_read(struct file *file,
1360                        char __user *buff, size_t count, loff_t *ppos)
1361{
1362        struct dpu_kms *kms = file->private_data;
1363        int len;
1364        char buf[40];
1365
1366        len = scnprintf(buf, sizeof(buf), "%d\n", !kms->has_danger_ctrl);
1367
1368        return simple_read_from_buffer(buff, count, ppos, buf, len);
1369}
1370
1371static void _dpu_plane_set_danger_state(struct dpu_kms *kms, bool enable)
1372{
1373        struct drm_plane *plane;
1374
1375        drm_for_each_plane(plane, kms->dev) {
1376                if (plane->fb && plane->state) {
1377                        dpu_plane_danger_signal_ctrl(plane, enable);
1378                        DPU_DEBUG("plane:%d img:%dx%d ",
1379                                plane->base.id, plane->fb->width,
1380                                plane->fb->height);
1381                        DPU_DEBUG("src[%d,%d,%d,%d] dst[%d,%d,%d,%d]\n",
1382                                plane->state->src_x >> 16,
1383                                plane->state->src_y >> 16,
1384                                plane->state->src_w >> 16,
1385                                plane->state->src_h >> 16,
1386                                plane->state->crtc_x, plane->state->crtc_y,
1387                                plane->state->crtc_w, plane->state->crtc_h);
1388                } else {
1389                        DPU_DEBUG("Inactive plane:%d\n", plane->base.id);
1390                }
1391        }
1392}
1393
1394static ssize_t _dpu_plane_danger_write(struct file *file,
1395                    const char __user *user_buf, size_t count, loff_t *ppos)
1396{
1397        struct dpu_kms *kms = file->private_data;
1398        int disable_panic;
1399        int ret;
1400
1401        ret = kstrtouint_from_user(user_buf, count, 0, &disable_panic);
1402        if (ret)
1403                return ret;
1404
1405        if (disable_panic) {
1406                /* Disable panic signal for all active pipes */
1407                DPU_DEBUG("Disabling danger:\n");
1408                _dpu_plane_set_danger_state(kms, false);
1409                kms->has_danger_ctrl = false;
1410        } else {
1411                /* Enable panic signal for all active pipes */
1412                DPU_DEBUG("Enabling danger:\n");
1413                kms->has_danger_ctrl = true;
1414                _dpu_plane_set_danger_state(kms, true);
1415        }
1416
1417        return count;
1418}
1419
1420static const struct file_operations dpu_plane_danger_enable = {
1421        .open = simple_open,
1422        .read = _dpu_plane_danger_read,
1423        .write = _dpu_plane_danger_write,
1424};
1425
1426static int _dpu_plane_init_debugfs(struct drm_plane *plane)
1427{
1428        struct dpu_plane *pdpu = to_dpu_plane(plane);
1429        struct dpu_kms *kms = _dpu_plane_get_kms(plane);
1430        const struct dpu_sspp_cfg *cfg = pdpu->pipe_hw->cap;
1431        const struct dpu_sspp_sub_blks *sblk = cfg->sblk;
1432
1433        /* create overall sub-directory for the pipe */
1434        pdpu->debugfs_root =
1435                debugfs_create_dir(pdpu->pipe_name,
1436                                plane->dev->primary->debugfs_root);
1437
1438        /* don't error check these */
1439        debugfs_create_x32("features", 0600,
1440                        pdpu->debugfs_root, &pdpu->features);
1441
1442        /* add register dump support */
1443        dpu_debugfs_setup_regset32(&pdpu->debugfs_src,
1444                        sblk->src_blk.base + cfg->base,
1445                        sblk->src_blk.len,
1446                        kms);
1447        dpu_debugfs_create_regset32("src_blk", 0400,
1448                        pdpu->debugfs_root, &pdpu->debugfs_src);
1449
1450        if (cfg->features & BIT(DPU_SSPP_SCALER_QSEED3) ||
1451                        cfg->features & BIT(DPU_SSPP_SCALER_QSEED3LITE) ||
1452                        cfg->features & BIT(DPU_SSPP_SCALER_QSEED2) ||
1453                        cfg->features & BIT(DPU_SSPP_SCALER_QSEED4)) {
1454                dpu_debugfs_setup_regset32(&pdpu->debugfs_scaler,
1455                                sblk->scaler_blk.base + cfg->base,
1456                                sblk->scaler_blk.len,
1457                                kms);
1458                dpu_debugfs_create_regset32("scaler_blk", 0400,
1459                                pdpu->debugfs_root,
1460                                &pdpu->debugfs_scaler);
1461                debugfs_create_bool("default_scaling",
1462                                0600,
1463                                pdpu->debugfs_root,
1464                                &pdpu->debugfs_default_scale);
1465        }
1466
1467        if (cfg->features & BIT(DPU_SSPP_CSC) ||
1468                        cfg->features & BIT(DPU_SSPP_CSC_10BIT)) {
1469                dpu_debugfs_setup_regset32(&pdpu->debugfs_csc,
1470                                sblk->csc_blk.base + cfg->base,
1471                                sblk->csc_blk.len,
1472                                kms);
1473                dpu_debugfs_create_regset32("csc_blk", 0400,
1474                                pdpu->debugfs_root, &pdpu->debugfs_csc);
1475        }
1476
1477        debugfs_create_u32("xin_id",
1478                        0400,
1479                        pdpu->debugfs_root,
1480                        (u32 *) &cfg->xin_id);
1481        debugfs_create_u32("clk_ctrl",
1482                        0400,
1483                        pdpu->debugfs_root,
1484                        (u32 *) &cfg->clk_ctrl);
1485        debugfs_create_x32("creq_vblank",
1486                        0600,
1487                        pdpu->debugfs_root,
1488                        (u32 *) &sblk->creq_vblank);
1489        debugfs_create_x32("danger_vblank",
1490                        0600,
1491                        pdpu->debugfs_root,
1492                        (u32 *) &sblk->danger_vblank);
1493
1494        debugfs_create_file("disable_danger",
1495                        0600,
1496                        pdpu->debugfs_root,
1497                        kms, &dpu_plane_danger_enable);
1498
1499        return 0;
1500}
1501#else
1502static int _dpu_plane_init_debugfs(struct drm_plane *plane)
1503{
1504        return 0;
1505}
1506#endif
1507
1508static int dpu_plane_late_register(struct drm_plane *plane)
1509{
1510        return _dpu_plane_init_debugfs(plane);
1511}
1512
1513static void dpu_plane_early_unregister(struct drm_plane *plane)
1514{
1515        struct dpu_plane *pdpu = to_dpu_plane(plane);
1516
1517        debugfs_remove_recursive(pdpu->debugfs_root);
1518}
1519
1520static bool dpu_plane_format_mod_supported(struct drm_plane *plane,
1521                uint32_t format, uint64_t modifier)
1522{
1523        if (modifier == DRM_FORMAT_MOD_LINEAR)
1524                return true;
1525
1526        if (modifier == DRM_FORMAT_MOD_QCOM_COMPRESSED) {
1527                int i;
1528                for (i = 0; i < ARRAY_SIZE(qcom_compressed_supported_formats); i++) {
1529                        if (format == qcom_compressed_supported_formats[i])
1530                                return true;
1531                }
1532        }
1533
1534        return false;
1535}
1536
1537static const struct drm_plane_funcs dpu_plane_funcs = {
1538                .update_plane = drm_atomic_helper_update_plane,
1539                .disable_plane = drm_atomic_helper_disable_plane,
1540                .destroy = dpu_plane_destroy,
1541                .reset = dpu_plane_reset,
1542                .atomic_duplicate_state = dpu_plane_duplicate_state,
1543                .atomic_destroy_state = dpu_plane_destroy_state,
1544                .late_register = dpu_plane_late_register,
1545                .early_unregister = dpu_plane_early_unregister,
1546                .format_mod_supported = dpu_plane_format_mod_supported,
1547};
1548
1549static const struct drm_plane_helper_funcs dpu_plane_helper_funcs = {
1550                .prepare_fb = dpu_plane_prepare_fb,
1551                .cleanup_fb = dpu_plane_cleanup_fb,
1552                .atomic_check = dpu_plane_atomic_check,
1553                .atomic_update = dpu_plane_atomic_update,
1554};
1555
1556enum dpu_sspp dpu_plane_pipe(struct drm_plane *plane)
1557{
1558        return plane ? to_dpu_plane(plane)->pipe : SSPP_NONE;
1559}
1560
1561bool is_dpu_plane_virtual(struct drm_plane *plane)
1562{
1563        return plane ? to_dpu_plane(plane)->is_virtual : false;
1564}
1565
1566/* initialize plane */
1567struct drm_plane *dpu_plane_init(struct drm_device *dev,
1568                uint32_t pipe, enum drm_plane_type type,
1569                unsigned long possible_crtcs, u32 master_plane_id)
1570{
1571        struct drm_plane *plane = NULL, *master_plane = NULL;
1572        const uint32_t *format_list;
1573        struct dpu_plane *pdpu;
1574        struct msm_drm_private *priv = dev->dev_private;
1575        struct dpu_kms *kms = to_dpu_kms(priv->kms);
1576        int zpos_max = DPU_ZPOS_MAX;
1577        uint32_t num_formats;
1578        int ret = -EINVAL;
1579
1580        /* create and zero local structure */
1581        pdpu = kzalloc(sizeof(*pdpu), GFP_KERNEL);
1582        if (!pdpu) {
1583                DPU_ERROR("[%u]failed to allocate local plane struct\n", pipe);
1584                ret = -ENOMEM;
1585                return ERR_PTR(ret);
1586        }
1587
1588        /* cache local stuff for later */
1589        plane = &pdpu->base;
1590        pdpu->pipe = pipe;
1591        pdpu->is_virtual = (master_plane_id != 0);
1592        INIT_LIST_HEAD(&pdpu->mplane_list);
1593        master_plane = drm_plane_find(dev, NULL, master_plane_id);
1594        if (master_plane) {
1595                struct dpu_plane *mpdpu = to_dpu_plane(master_plane);
1596
1597                list_add_tail(&pdpu->mplane_list, &mpdpu->mplane_list);
1598        }
1599
1600        /* initialize underlying h/w driver */
1601        pdpu->pipe_hw = dpu_hw_sspp_init(pipe, kms->mmio, kms->catalog,
1602                                                        master_plane_id != 0);
1603        if (IS_ERR(pdpu->pipe_hw)) {
1604                DPU_ERROR("[%u]SSPP init failed\n", pipe);
1605                ret = PTR_ERR(pdpu->pipe_hw);
1606                goto clean_plane;
1607        } else if (!pdpu->pipe_hw->cap || !pdpu->pipe_hw->cap->sblk) {
1608                DPU_ERROR("[%u]SSPP init returned invalid cfg\n", pipe);
1609                goto clean_sspp;
1610        }
1611
1612        /* cache features mask for later */
1613        pdpu->features = pdpu->pipe_hw->cap->features;
1614        pdpu->pipe_sblk = pdpu->pipe_hw->cap->sblk;
1615        if (!pdpu->pipe_sblk) {
1616                DPU_ERROR("[%u]invalid sblk\n", pipe);
1617                goto clean_sspp;
1618        }
1619
1620        if (pdpu->is_virtual) {
1621                format_list = pdpu->pipe_sblk->virt_format_list;
1622                num_formats = pdpu->pipe_sblk->virt_num_formats;
1623        }
1624        else {
1625                format_list = pdpu->pipe_sblk->format_list;
1626                num_formats = pdpu->pipe_sblk->num_formats;
1627        }
1628
1629        ret = drm_universal_plane_init(dev, plane, 0xff, &dpu_plane_funcs,
1630                                format_list, num_formats,
1631                                supported_format_modifiers, type, NULL);
1632        if (ret)
1633                goto clean_sspp;
1634
1635        pdpu->catalog = kms->catalog;
1636
1637        if (kms->catalog->mixer_count &&
1638                kms->catalog->mixer[0].sblk->maxblendstages) {
1639                zpos_max = kms->catalog->mixer[0].sblk->maxblendstages - 1;
1640                if (zpos_max > DPU_STAGE_MAX - DPU_STAGE_0 - 1)
1641                        zpos_max = DPU_STAGE_MAX - DPU_STAGE_0 - 1;
1642        }
1643
1644        ret = drm_plane_create_zpos_property(plane, 0, 0, zpos_max);
1645        if (ret)
1646                DPU_ERROR("failed to install zpos property, rc = %d\n", ret);
1647
1648        drm_plane_create_alpha_property(plane);
1649        drm_plane_create_blend_mode_property(plane,
1650                        BIT(DRM_MODE_BLEND_PIXEL_NONE) |
1651                        BIT(DRM_MODE_BLEND_PREMULTI) |
1652                        BIT(DRM_MODE_BLEND_COVERAGE));
1653
1654        drm_plane_create_rotation_property(plane,
1655                        DRM_MODE_ROTATE_0,
1656                        DRM_MODE_ROTATE_0 |
1657                        DRM_MODE_ROTATE_180 |
1658                        DRM_MODE_REFLECT_X |
1659                        DRM_MODE_REFLECT_Y);
1660
1661        drm_plane_enable_fb_damage_clips(plane);
1662
1663        /* success! finalize initialization */
1664        drm_plane_helper_add(plane, &dpu_plane_helper_funcs);
1665
1666        /* save user friendly pipe name for later */
1667        snprintf(pdpu->pipe_name, DPU_NAME_SIZE, "plane%u", plane->base.id);
1668
1669        mutex_init(&pdpu->lock);
1670
1671        DPU_DEBUG("%s created for pipe:%u id:%u virtual:%u\n", pdpu->pipe_name,
1672                                        pipe, plane->base.id, master_plane_id);
1673        return plane;
1674
1675clean_sspp:
1676        if (pdpu && pdpu->pipe_hw)
1677                dpu_hw_sspp_destroy(pdpu->pipe_hw);
1678clean_plane:
1679        kfree(pdpu);
1680        return ERR_PTR(ret);
1681}
1682