linux/drivers/hwmon/jc42.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 * jc42.c - driver for Jedec JC42.4 compliant temperature sensors
   4 *
   5 * Copyright (c) 2010  Ericsson AB.
   6 *
   7 * Derived from lm77.c by Andras BALI <drewie@freemail.hu>.
   8 *
   9 * JC42.4 compliant temperature sensors are typically used on memory modules.
  10 */
  11
  12#include <linux/bitops.h>
  13#include <linux/module.h>
  14#include <linux/init.h>
  15#include <linux/slab.h>
  16#include <linux/jiffies.h>
  17#include <linux/i2c.h>
  18#include <linux/hwmon.h>
  19#include <linux/err.h>
  20#include <linux/mutex.h>
  21#include <linux/of.h>
  22
  23/* Addresses to scan */
  24static const unsigned short normal_i2c[] = {
  25        0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, I2C_CLIENT_END };
  26
  27/* JC42 registers. All registers are 16 bit. */
  28#define JC42_REG_CAP            0x00
  29#define JC42_REG_CONFIG         0x01
  30#define JC42_REG_TEMP_UPPER     0x02
  31#define JC42_REG_TEMP_LOWER     0x03
  32#define JC42_REG_TEMP_CRITICAL  0x04
  33#define JC42_REG_TEMP           0x05
  34#define JC42_REG_MANID          0x06
  35#define JC42_REG_DEVICEID       0x07
  36#define JC42_REG_SMBUS          0x22 /* NXP and Atmel, possibly others? */
  37
  38/* Status bits in temperature register */
  39#define JC42_ALARM_CRIT_BIT     15
  40#define JC42_ALARM_MAX_BIT      14
  41#define JC42_ALARM_MIN_BIT      13
  42
  43/* Configuration register defines */
  44#define JC42_CFG_CRIT_ONLY      (1 << 2)
  45#define JC42_CFG_TCRIT_LOCK     (1 << 6)
  46#define JC42_CFG_EVENT_LOCK     (1 << 7)
  47#define JC42_CFG_SHUTDOWN       (1 << 8)
  48#define JC42_CFG_HYST_SHIFT     9
  49#define JC42_CFG_HYST_MASK      (0x03 << 9)
  50
  51/* Capabilities */
  52#define JC42_CAP_RANGE          (1 << 2)
  53
  54/* Manufacturer IDs */
  55#define ADT_MANID               0x11d4  /* Analog Devices */
  56#define ATMEL_MANID             0x001f  /* Atmel */
  57#define ATMEL_MANID2            0x1114  /* Atmel */
  58#define MAX_MANID               0x004d  /* Maxim */
  59#define IDT_MANID               0x00b3  /* IDT */
  60#define MCP_MANID               0x0054  /* Microchip */
  61#define NXP_MANID               0x1131  /* NXP Semiconductors */
  62#define ONS_MANID               0x1b09  /* ON Semiconductor */
  63#define STM_MANID               0x104a  /* ST Microelectronics */
  64#define GT_MANID                0x1c68  /* Giantec */
  65#define GT_MANID2               0x132d  /* Giantec, 2nd mfg ID */
  66
  67/* SMBUS register */
  68#define SMBUS_STMOUT            BIT(7)  /* SMBus time-out, active low */
  69
  70/* Supported chips */
  71
  72/* Analog Devices */
  73#define ADT7408_DEVID           0x0801
  74#define ADT7408_DEVID_MASK      0xffff
  75
  76/* Atmel */
  77#define AT30TS00_DEVID          0x8201
  78#define AT30TS00_DEVID_MASK     0xffff
  79
  80#define AT30TSE004_DEVID        0x2200
  81#define AT30TSE004_DEVID_MASK   0xffff
  82
  83/* Giantec */
  84#define GT30TS00_DEVID          0x2200
  85#define GT30TS00_DEVID_MASK     0xff00
  86
  87#define GT34TS02_DEVID          0x3300
  88#define GT34TS02_DEVID_MASK     0xff00
  89
  90/* IDT */
  91#define TSE2004_DEVID           0x2200
  92#define TSE2004_DEVID_MASK      0xff00
  93
  94#define TS3000_DEVID            0x2900  /* Also matches TSE2002 */
  95#define TS3000_DEVID_MASK       0xff00
  96
  97#define TS3001_DEVID            0x3000
  98#define TS3001_DEVID_MASK       0xff00
  99
 100/* Maxim */
 101#define MAX6604_DEVID           0x3e00
 102#define MAX6604_DEVID_MASK      0xffff
 103
 104/* Microchip */
 105#define MCP9804_DEVID           0x0200
 106#define MCP9804_DEVID_MASK      0xfffc
 107
 108#define MCP9808_DEVID           0x0400
 109#define MCP9808_DEVID_MASK      0xfffc
 110
 111#define MCP98242_DEVID          0x2000
 112#define MCP98242_DEVID_MASK     0xfffc
 113
 114#define MCP98243_DEVID          0x2100
 115#define MCP98243_DEVID_MASK     0xfffc
 116
 117#define MCP98244_DEVID          0x2200
 118#define MCP98244_DEVID_MASK     0xfffc
 119
 120#define MCP9843_DEVID           0x0000  /* Also matches mcp9805 */
 121#define MCP9843_DEVID_MASK      0xfffe
 122
 123/* NXP */
 124#define SE97_DEVID              0xa200
 125#define SE97_DEVID_MASK         0xfffc
 126
 127#define SE98_DEVID              0xa100
 128#define SE98_DEVID_MASK         0xfffc
 129
 130/* ON Semiconductor */
 131#define CAT6095_DEVID           0x0800  /* Also matches CAT34TS02 */
 132#define CAT6095_DEVID_MASK      0xffe0
 133
 134#define CAT34TS02C_DEVID        0x0a00
 135#define CAT34TS02C_DEVID_MASK   0xfff0
 136
 137#define CAT34TS04_DEVID         0x2200
 138#define CAT34TS04_DEVID_MASK    0xfff0
 139
 140/* ST Microelectronics */
 141#define STTS424_DEVID           0x0101
 142#define STTS424_DEVID_MASK      0xffff
 143
 144#define STTS424E_DEVID          0x0000
 145#define STTS424E_DEVID_MASK     0xfffe
 146
 147#define STTS2002_DEVID          0x0300
 148#define STTS2002_DEVID_MASK     0xffff
 149
 150#define STTS2004_DEVID          0x2201
 151#define STTS2004_DEVID_MASK     0xffff
 152
 153#define STTS3000_DEVID          0x0200
 154#define STTS3000_DEVID_MASK     0xffff
 155
 156static u16 jc42_hysteresis[] = { 0, 1500, 3000, 6000 };
 157
 158struct jc42_chips {
 159        u16 manid;
 160        u16 devid;
 161        u16 devid_mask;
 162};
 163
 164static struct jc42_chips jc42_chips[] = {
 165        { ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK },
 166        { ATMEL_MANID, AT30TS00_DEVID, AT30TS00_DEVID_MASK },
 167        { ATMEL_MANID2, AT30TSE004_DEVID, AT30TSE004_DEVID_MASK },
 168        { GT_MANID, GT30TS00_DEVID, GT30TS00_DEVID_MASK },
 169        { GT_MANID2, GT34TS02_DEVID, GT34TS02_DEVID_MASK },
 170        { IDT_MANID, TSE2004_DEVID, TSE2004_DEVID_MASK },
 171        { IDT_MANID, TS3000_DEVID, TS3000_DEVID_MASK },
 172        { IDT_MANID, TS3001_DEVID, TS3001_DEVID_MASK },
 173        { MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK },
 174        { MCP_MANID, MCP9804_DEVID, MCP9804_DEVID_MASK },
 175        { MCP_MANID, MCP9808_DEVID, MCP9808_DEVID_MASK },
 176        { MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK },
 177        { MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK },
 178        { MCP_MANID, MCP98244_DEVID, MCP98244_DEVID_MASK },
 179        { MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK },
 180        { NXP_MANID, SE97_DEVID, SE97_DEVID_MASK },
 181        { ONS_MANID, CAT6095_DEVID, CAT6095_DEVID_MASK },
 182        { ONS_MANID, CAT34TS02C_DEVID, CAT34TS02C_DEVID_MASK },
 183        { ONS_MANID, CAT34TS04_DEVID, CAT34TS04_DEVID_MASK },
 184        { NXP_MANID, SE98_DEVID, SE98_DEVID_MASK },
 185        { STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK },
 186        { STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK },
 187        { STM_MANID, STTS2002_DEVID, STTS2002_DEVID_MASK },
 188        { STM_MANID, STTS2004_DEVID, STTS2004_DEVID_MASK },
 189        { STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK },
 190};
 191
 192enum temp_index {
 193        t_input = 0,
 194        t_crit,
 195        t_min,
 196        t_max,
 197        t_num_temp
 198};
 199
 200static const u8 temp_regs[t_num_temp] = {
 201        [t_input] = JC42_REG_TEMP,
 202        [t_crit] = JC42_REG_TEMP_CRITICAL,
 203        [t_min] = JC42_REG_TEMP_LOWER,
 204        [t_max] = JC42_REG_TEMP_UPPER,
 205};
 206
 207/* Each client has this additional data */
 208struct jc42_data {
 209        struct i2c_client *client;
 210        struct mutex    update_lock;    /* protect register access */
 211        bool            extended;       /* true if extended range supported */
 212        bool            valid;
 213        unsigned long   last_updated;   /* In jiffies */
 214        u16             orig_config;    /* original configuration */
 215        u16             config;         /* current configuration */
 216        u16             temp[t_num_temp];/* Temperatures */
 217};
 218
 219#define JC42_TEMP_MIN_EXTENDED  (-40000)
 220#define JC42_TEMP_MIN           0
 221#define JC42_TEMP_MAX           125000
 222
 223static u16 jc42_temp_to_reg(long temp, bool extended)
 224{
 225        int ntemp = clamp_val(temp,
 226                              extended ? JC42_TEMP_MIN_EXTENDED :
 227                              JC42_TEMP_MIN, JC42_TEMP_MAX);
 228
 229        /* convert from 0.001 to 0.0625 resolution */
 230        return (ntemp * 2 / 125) & 0x1fff;
 231}
 232
 233static int jc42_temp_from_reg(s16 reg)
 234{
 235        reg = sign_extend32(reg, 12);
 236
 237        /* convert from 0.0625 to 0.001 resolution */
 238        return reg * 125 / 2;
 239}
 240
 241static struct jc42_data *jc42_update_device(struct device *dev)
 242{
 243        struct jc42_data *data = dev_get_drvdata(dev);
 244        struct i2c_client *client = data->client;
 245        struct jc42_data *ret = data;
 246        int i, val;
 247
 248        mutex_lock(&data->update_lock);
 249
 250        if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
 251                for (i = 0; i < t_num_temp; i++) {
 252                        val = i2c_smbus_read_word_swapped(client, temp_regs[i]);
 253                        if (val < 0) {
 254                                ret = ERR_PTR(val);
 255                                goto abort;
 256                        }
 257                        data->temp[i] = val;
 258                }
 259                data->last_updated = jiffies;
 260                data->valid = true;
 261        }
 262abort:
 263        mutex_unlock(&data->update_lock);
 264        return ret;
 265}
 266
 267static int jc42_read(struct device *dev, enum hwmon_sensor_types type,
 268                     u32 attr, int channel, long *val)
 269{
 270        struct jc42_data *data = jc42_update_device(dev);
 271        int temp, hyst;
 272
 273        if (IS_ERR(data))
 274                return PTR_ERR(data);
 275
 276        switch (attr) {
 277        case hwmon_temp_input:
 278                *val = jc42_temp_from_reg(data->temp[t_input]);
 279                return 0;
 280        case hwmon_temp_min:
 281                *val = jc42_temp_from_reg(data->temp[t_min]);
 282                return 0;
 283        case hwmon_temp_max:
 284                *val = jc42_temp_from_reg(data->temp[t_max]);
 285                return 0;
 286        case hwmon_temp_crit:
 287                *val = jc42_temp_from_reg(data->temp[t_crit]);
 288                return 0;
 289        case hwmon_temp_max_hyst:
 290                temp = jc42_temp_from_reg(data->temp[t_max]);
 291                hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK)
 292                                                >> JC42_CFG_HYST_SHIFT];
 293                *val = temp - hyst;
 294                return 0;
 295        case hwmon_temp_crit_hyst:
 296                temp = jc42_temp_from_reg(data->temp[t_crit]);
 297                hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK)
 298                                                >> JC42_CFG_HYST_SHIFT];
 299                *val = temp - hyst;
 300                return 0;
 301        case hwmon_temp_min_alarm:
 302                *val = (data->temp[t_input] >> JC42_ALARM_MIN_BIT) & 1;
 303                return 0;
 304        case hwmon_temp_max_alarm:
 305                *val = (data->temp[t_input] >> JC42_ALARM_MAX_BIT) & 1;
 306                return 0;
 307        case hwmon_temp_crit_alarm:
 308                *val = (data->temp[t_input] >> JC42_ALARM_CRIT_BIT) & 1;
 309                return 0;
 310        default:
 311                return -EOPNOTSUPP;
 312        }
 313}
 314
 315static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
 316                      u32 attr, int channel, long val)
 317{
 318        struct jc42_data *data = dev_get_drvdata(dev);
 319        struct i2c_client *client = data->client;
 320        int diff, hyst;
 321        int ret;
 322
 323        mutex_lock(&data->update_lock);
 324
 325        switch (attr) {
 326        case hwmon_temp_min:
 327                data->temp[t_min] = jc42_temp_to_reg(val, data->extended);
 328                ret = i2c_smbus_write_word_swapped(client, temp_regs[t_min],
 329                                                   data->temp[t_min]);
 330                break;
 331        case hwmon_temp_max:
 332                data->temp[t_max] = jc42_temp_to_reg(val, data->extended);
 333                ret = i2c_smbus_write_word_swapped(client, temp_regs[t_max],
 334                                                   data->temp[t_max]);
 335                break;
 336        case hwmon_temp_crit:
 337                data->temp[t_crit] = jc42_temp_to_reg(val, data->extended);
 338                ret = i2c_smbus_write_word_swapped(client, temp_regs[t_crit],
 339                                                   data->temp[t_crit]);
 340                break;
 341        case hwmon_temp_crit_hyst:
 342                /*
 343                 * JC42.4 compliant chips only support four hysteresis values.
 344                 * Pick best choice and go from there.
 345                 */
 346                val = clamp_val(val, (data->extended ? JC42_TEMP_MIN_EXTENDED
 347                                                     : JC42_TEMP_MIN) - 6000,
 348                                JC42_TEMP_MAX);
 349                diff = jc42_temp_from_reg(data->temp[t_crit]) - val;
 350                hyst = 0;
 351                if (diff > 0) {
 352                        if (diff < 2250)
 353                                hyst = 1;       /* 1.5 degrees C */
 354                        else if (diff < 4500)
 355                                hyst = 2;       /* 3.0 degrees C */
 356                        else
 357                                hyst = 3;       /* 6.0 degrees C */
 358                }
 359                data->config = (data->config & ~JC42_CFG_HYST_MASK) |
 360                                (hyst << JC42_CFG_HYST_SHIFT);
 361                ret = i2c_smbus_write_word_swapped(data->client,
 362                                                   JC42_REG_CONFIG,
 363                                                   data->config);
 364                break;
 365        default:
 366                ret = -EOPNOTSUPP;
 367                break;
 368        }
 369
 370        mutex_unlock(&data->update_lock);
 371
 372        return ret;
 373}
 374
 375static umode_t jc42_is_visible(const void *_data, enum hwmon_sensor_types type,
 376                               u32 attr, int channel)
 377{
 378        const struct jc42_data *data = _data;
 379        unsigned int config = data->config;
 380        umode_t mode = 0444;
 381
 382        switch (attr) {
 383        case hwmon_temp_min:
 384        case hwmon_temp_max:
 385                if (!(config & JC42_CFG_EVENT_LOCK))
 386                        mode |= 0200;
 387                break;
 388        case hwmon_temp_crit:
 389                if (!(config & JC42_CFG_TCRIT_LOCK))
 390                        mode |= 0200;
 391                break;
 392        case hwmon_temp_crit_hyst:
 393                if (!(config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK)))
 394                        mode |= 0200;
 395                break;
 396        case hwmon_temp_input:
 397        case hwmon_temp_max_hyst:
 398        case hwmon_temp_min_alarm:
 399        case hwmon_temp_max_alarm:
 400        case hwmon_temp_crit_alarm:
 401                break;
 402        default:
 403                mode = 0;
 404                break;
 405        }
 406        return mode;
 407}
 408
 409/* Return 0 if detection is successful, -ENODEV otherwise */
 410static int jc42_detect(struct i2c_client *client, struct i2c_board_info *info)
 411{
 412        struct i2c_adapter *adapter = client->adapter;
 413        int i, config, cap, manid, devid;
 414
 415        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
 416                                     I2C_FUNC_SMBUS_WORD_DATA))
 417                return -ENODEV;
 418
 419        cap = i2c_smbus_read_word_swapped(client, JC42_REG_CAP);
 420        config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG);
 421        manid = i2c_smbus_read_word_swapped(client, JC42_REG_MANID);
 422        devid = i2c_smbus_read_word_swapped(client, JC42_REG_DEVICEID);
 423
 424        if (cap < 0 || config < 0 || manid < 0 || devid < 0)
 425                return -ENODEV;
 426
 427        if ((cap & 0xff00) || (config & 0xf800))
 428                return -ENODEV;
 429
 430        for (i = 0; i < ARRAY_SIZE(jc42_chips); i++) {
 431                struct jc42_chips *chip = &jc42_chips[i];
 432                if (manid == chip->manid &&
 433                    (devid & chip->devid_mask) == chip->devid) {
 434                        strlcpy(info->type, "jc42", I2C_NAME_SIZE);
 435                        return 0;
 436                }
 437        }
 438        return -ENODEV;
 439}
 440
 441static const struct hwmon_channel_info *jc42_info[] = {
 442        HWMON_CHANNEL_INFO(temp,
 443                           HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
 444                           HWMON_T_CRIT | HWMON_T_MAX_HYST |
 445                           HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
 446                           HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM),
 447        NULL
 448};
 449
 450static const struct hwmon_ops jc42_hwmon_ops = {
 451        .is_visible = jc42_is_visible,
 452        .read = jc42_read,
 453        .write = jc42_write,
 454};
 455
 456static const struct hwmon_chip_info jc42_chip_info = {
 457        .ops = &jc42_hwmon_ops,
 458        .info = jc42_info,
 459};
 460
 461static int jc42_probe(struct i2c_client *client)
 462{
 463        struct device *dev = &client->dev;
 464        struct device *hwmon_dev;
 465        struct jc42_data *data;
 466        int config, cap;
 467
 468        data = devm_kzalloc(dev, sizeof(struct jc42_data), GFP_KERNEL);
 469        if (!data)
 470                return -ENOMEM;
 471
 472        data->client = client;
 473        i2c_set_clientdata(client, data);
 474        mutex_init(&data->update_lock);
 475
 476        cap = i2c_smbus_read_word_swapped(client, JC42_REG_CAP);
 477        if (cap < 0)
 478                return cap;
 479
 480        data->extended = !!(cap & JC42_CAP_RANGE);
 481
 482        if (device_property_read_bool(dev, "smbus-timeout-disable")) {
 483                int smbus;
 484
 485                /*
 486                 * Not all chips support this register, but from a
 487                 * quick read of various datasheets no chip appears
 488                 * incompatible with the below attempt to disable
 489                 * the timeout. And the whole thing is opt-in...
 490                 */
 491                smbus = i2c_smbus_read_word_swapped(client, JC42_REG_SMBUS);
 492                if (smbus < 0)
 493                        return smbus;
 494                i2c_smbus_write_word_swapped(client, JC42_REG_SMBUS,
 495                                             smbus | SMBUS_STMOUT);
 496        }
 497
 498        config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG);
 499        if (config < 0)
 500                return config;
 501
 502        data->orig_config = config;
 503        if (config & JC42_CFG_SHUTDOWN) {
 504                config &= ~JC42_CFG_SHUTDOWN;
 505                i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config);
 506        }
 507        data->config = config;
 508
 509        hwmon_dev = devm_hwmon_device_register_with_info(dev, "jc42",
 510                                                         data, &jc42_chip_info,
 511                                                         NULL);
 512        return PTR_ERR_OR_ZERO(hwmon_dev);
 513}
 514
 515static int jc42_remove(struct i2c_client *client)
 516{
 517        struct jc42_data *data = i2c_get_clientdata(client);
 518
 519        /* Restore original configuration except hysteresis */
 520        if ((data->config & ~JC42_CFG_HYST_MASK) !=
 521            (data->orig_config & ~JC42_CFG_HYST_MASK)) {
 522                int config;
 523
 524                config = (data->orig_config & ~JC42_CFG_HYST_MASK)
 525                  | (data->config & JC42_CFG_HYST_MASK);
 526                i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config);
 527        }
 528        return 0;
 529}
 530
 531#ifdef CONFIG_PM
 532
 533static int jc42_suspend(struct device *dev)
 534{
 535        struct jc42_data *data = dev_get_drvdata(dev);
 536
 537        data->config |= JC42_CFG_SHUTDOWN;
 538        i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG,
 539                                     data->config);
 540        return 0;
 541}
 542
 543static int jc42_resume(struct device *dev)
 544{
 545        struct jc42_data *data = dev_get_drvdata(dev);
 546
 547        data->config &= ~JC42_CFG_SHUTDOWN;
 548        i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG,
 549                                     data->config);
 550        return 0;
 551}
 552
 553static const struct dev_pm_ops jc42_dev_pm_ops = {
 554        .suspend = jc42_suspend,
 555        .resume = jc42_resume,
 556};
 557
 558#define JC42_DEV_PM_OPS (&jc42_dev_pm_ops)
 559#else
 560#define JC42_DEV_PM_OPS NULL
 561#endif /* CONFIG_PM */
 562
 563static const struct i2c_device_id jc42_id[] = {
 564        { "jc42", 0 },
 565        { }
 566};
 567MODULE_DEVICE_TABLE(i2c, jc42_id);
 568
 569#ifdef CONFIG_OF
 570static const struct of_device_id jc42_of_ids[] = {
 571        { .compatible = "jedec,jc-42.4-temp", },
 572        { }
 573};
 574MODULE_DEVICE_TABLE(of, jc42_of_ids);
 575#endif
 576
 577static struct i2c_driver jc42_driver = {
 578        .class          = I2C_CLASS_SPD | I2C_CLASS_HWMON,
 579        .driver = {
 580                .name   = "jc42",
 581                .pm = JC42_DEV_PM_OPS,
 582                .of_match_table = of_match_ptr(jc42_of_ids),
 583        },
 584        .probe_new      = jc42_probe,
 585        .remove         = jc42_remove,
 586        .id_table       = jc42_id,
 587        .detect         = jc42_detect,
 588        .address_list   = normal_i2c,
 589};
 590
 591module_i2c_driver(jc42_driver);
 592
 593MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
 594MODULE_DESCRIPTION("JC42 driver");
 595MODULE_LICENSE("GPL");
 596