linux/drivers/staging/nvec/nvec.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0
   2/*
   3 * NVEC: NVIDIA compliant embedded controller interface
   4 *
   5 * Copyright (C) 2011 The AC100 Kernel Team <ac100@lists.lauchpad.net>
   6 *
   7 * Authors:  Pierre-Hugues Husson <phhusson@free.fr>
   8 *           Ilya Petrov <ilya.muromec@gmail.com>
   9 *           Marc Dietrich <marvin24@gmx.de>
  10 *           Julian Andres Klode <jak@jak-linux.org>
  11 */
  12
  13#include <linux/kernel.h>
  14#include <linux/module.h>
  15#include <linux/atomic.h>
  16#include <linux/clk.h>
  17#include <linux/completion.h>
  18#include <linux/delay.h>
  19#include <linux/err.h>
  20#include <linux/gpio/consumer.h>
  21#include <linux/interrupt.h>
  22#include <linux/io.h>
  23#include <linux/irq.h>
  24#include <linux/of.h>
  25#include <linux/list.h>
  26#include <linux/mfd/core.h>
  27#include <linux/mutex.h>
  28#include <linux/notifier.h>
  29#include <linux/slab.h>
  30#include <linux/spinlock.h>
  31#include <linux/workqueue.h>
  32
  33#include "nvec.h"
  34
  35#define I2C_CNFG                        0x00
  36#define I2C_CNFG_PACKET_MODE_EN         BIT(10)
  37#define I2C_CNFG_NEW_MASTER_SFM         BIT(11)
  38#define I2C_CNFG_DEBOUNCE_CNT_SHIFT     12
  39
  40#define I2C_SL_CNFG             0x20
  41#define I2C_SL_NEWSL            BIT(2)
  42#define I2C_SL_NACK             BIT(1)
  43#define I2C_SL_RESP             BIT(0)
  44#define I2C_SL_IRQ              BIT(3)
  45#define END_TRANS               BIT(4)
  46#define RCVD                    BIT(2)
  47#define RNW                     BIT(1)
  48
  49#define I2C_SL_RCVD             0x24
  50#define I2C_SL_STATUS           0x28
  51#define I2C_SL_ADDR1            0x2c
  52#define I2C_SL_ADDR2            0x30
  53#define I2C_SL_DELAY_COUNT      0x3c
  54
  55/**
  56 * enum nvec_msg_category - Message categories for nvec_msg_alloc()
  57 * @NVEC_MSG_RX: The message is an incoming message (from EC)
  58 * @NVEC_MSG_TX: The message is an outgoing message (to EC)
  59 */
  60enum nvec_msg_category  {
  61        NVEC_MSG_RX,
  62        NVEC_MSG_TX,
  63};
  64
  65enum nvec_sleep_subcmds {
  66        GLOBAL_EVENTS,
  67        AP_PWR_DOWN,
  68        AP_SUSPEND,
  69};
  70
  71#define CNF_EVENT_REPORTING 0x01
  72#define GET_FIRMWARE_VERSION 0x15
  73#define LID_SWITCH BIT(1)
  74#define PWR_BUTTON BIT(15)
  75
  76static struct nvec_chip *nvec_power_handle;
  77
  78static const struct mfd_cell nvec_devices[] = {
  79        {
  80                .name = "nvec-kbd",
  81        },
  82        {
  83                .name = "nvec-mouse",
  84        },
  85        {
  86                .name = "nvec-power",
  87                .id = 0,
  88        },
  89        {
  90                .name = "nvec-power",
  91                .id = 1,
  92        },
  93        {
  94                .name = "nvec-paz00",
  95        },
  96};
  97
  98/**
  99 * nvec_register_notifier - Register a notifier with nvec
 100 * @nvec: A &struct nvec_chip
 101 * @nb: The notifier block to register
 102 * @events: Unused
 103 *
 104 * Registers a notifier with @nvec. The notifier will be added to an atomic
 105 * notifier chain that is called for all received messages except those that
 106 * correspond to a request initiated by nvec_write_sync().
 107 */
 108int nvec_register_notifier(struct nvec_chip *nvec, struct notifier_block *nb,
 109                           unsigned int events)
 110{
 111        return atomic_notifier_chain_register(&nvec->notifier_list, nb);
 112}
 113EXPORT_SYMBOL_GPL(nvec_register_notifier);
 114
 115/**
 116 * nvec_unregister_notifier - Unregister a notifier with nvec
 117 * @nvec: A &struct nvec_chip
 118 * @nb: The notifier block to unregister
 119 *
 120 * Unregisters a notifier with @nvec. The notifier will be removed from the
 121 * atomic notifier chain.
 122 */
 123int nvec_unregister_notifier(struct nvec_chip *nvec, struct notifier_block *nb)
 124{
 125        return atomic_notifier_chain_unregister(&nvec->notifier_list, nb);
 126}
 127EXPORT_SYMBOL_GPL(nvec_unregister_notifier);
 128
 129/*
 130 * nvec_status_notifier - The final notifier
 131 *
 132 * Prints a message about control events not handled in the notifier
 133 * chain.
 134 */
 135static int nvec_status_notifier(struct notifier_block *nb,
 136                                unsigned long event_type, void *data)
 137{
 138        struct nvec_chip *nvec = container_of(nb, struct nvec_chip,
 139                                                nvec_status_notifier);
 140        unsigned char *msg = data;
 141
 142        if (event_type != NVEC_CNTL)
 143                return NOTIFY_DONE;
 144
 145        dev_warn(nvec->dev, "unhandled msg type %ld\n", event_type);
 146        print_hex_dump(KERN_WARNING, "payload: ", DUMP_PREFIX_NONE, 16, 1,
 147                       msg, msg[1] + 2, true);
 148
 149        return NOTIFY_OK;
 150}
 151
 152/**
 153 * nvec_msg_alloc:
 154 * @nvec: A &struct nvec_chip
 155 * @category: Pool category, see &enum nvec_msg_category
 156 *
 157 * Allocate a single &struct nvec_msg object from the message pool of
 158 * @nvec. The result shall be passed to nvec_msg_free() if no longer
 159 * used.
 160 *
 161 * Outgoing messages are placed in the upper 75% of the pool, keeping the
 162 * lower 25% available for RX buffers only. The reason is to prevent a
 163 * situation where all buffers are full and a message is thus endlessly
 164 * retried because the response could never be processed.
 165 */
 166static struct nvec_msg *nvec_msg_alloc(struct nvec_chip *nvec,
 167                                       enum nvec_msg_category category)
 168{
 169        int i = (category == NVEC_MSG_TX) ? (NVEC_POOL_SIZE / 4) : 0;
 170
 171        for (; i < NVEC_POOL_SIZE; i++) {
 172                if (atomic_xchg(&nvec->msg_pool[i].used, 1) == 0) {
 173                        dev_vdbg(nvec->dev, "INFO: Allocate %i\n", i);
 174                        return &nvec->msg_pool[i];
 175                }
 176        }
 177
 178        dev_err(nvec->dev, "could not allocate %s buffer\n",
 179                (category == NVEC_MSG_TX) ? "TX" : "RX");
 180
 181        return NULL;
 182}
 183
 184/**
 185 * nvec_msg_free:
 186 * @nvec: A &struct nvec_chip
 187 * @msg:  A message (must be allocated by nvec_msg_alloc() and belong to @nvec)
 188 *
 189 * Free the given message
 190 */
 191void nvec_msg_free(struct nvec_chip *nvec, struct nvec_msg *msg)
 192{
 193        if (msg != &nvec->tx_scratch)
 194                dev_vdbg(nvec->dev, "INFO: Free %ti\n", msg - nvec->msg_pool);
 195        atomic_set(&msg->used, 0);
 196}
 197EXPORT_SYMBOL_GPL(nvec_msg_free);
 198
 199/**
 200 * nvec_msg_is_event - Return %true if @msg is an event
 201 * @msg: A message
 202 */
 203static bool nvec_msg_is_event(struct nvec_msg *msg)
 204{
 205        return msg->data[0] >> 7;
 206}
 207
 208/**
 209 * nvec_msg_size - Get the size of a message
 210 * @msg: The message to get the size for
 211 *
 212 * This only works for received messages, not for outgoing messages.
 213 */
 214static size_t nvec_msg_size(struct nvec_msg *msg)
 215{
 216        bool is_event = nvec_msg_is_event(msg);
 217        int event_length = (msg->data[0] & 0x60) >> 5;
 218
 219        /* for variable size, payload size in byte 1 + count (1) + cmd (1) */
 220        if (!is_event || event_length == NVEC_VAR_SIZE)
 221                return (msg->pos || msg->size) ? (msg->data[1] + 2) : 0;
 222        else if (event_length == NVEC_2BYTES)
 223                return 2;
 224        else if (event_length == NVEC_3BYTES)
 225                return 3;
 226        return 0;
 227}
 228
 229/**
 230 * nvec_gpio_set_value - Set the GPIO value
 231 * @nvec: A &struct nvec_chip
 232 * @value: The value to write (0 or 1)
 233 *
 234 * Like gpio_set_value(), but generating debugging information
 235 */
 236static void nvec_gpio_set_value(struct nvec_chip *nvec, int value)
 237{
 238        dev_dbg(nvec->dev, "GPIO changed from %u to %u\n",
 239                gpiod_get_value(nvec->gpiod), value);
 240        gpiod_set_value(nvec->gpiod, value);
 241}
 242
 243/**
 244 * nvec_write_async - Asynchronously write a message to NVEC
 245 * @nvec: An nvec_chip instance
 246 * @data: The message data, starting with the request type
 247 * @size: The size of @data
 248 *
 249 * Queue a single message to be transferred to the embedded controller
 250 * and return immediately.
 251 *
 252 * Returns: 0 on success, a negative error code on failure. If a failure
 253 * occurred, the nvec driver may print an error.
 254 */
 255int nvec_write_async(struct nvec_chip *nvec, const unsigned char *data,
 256                     short size)
 257{
 258        struct nvec_msg *msg;
 259        unsigned long flags;
 260
 261        msg = nvec_msg_alloc(nvec, NVEC_MSG_TX);
 262
 263        if (!msg)
 264                return -ENOMEM;
 265
 266        msg->data[0] = size;
 267        memcpy(msg->data + 1, data, size);
 268        msg->size = size + 1;
 269
 270        spin_lock_irqsave(&nvec->tx_lock, flags);
 271        list_add_tail(&msg->node, &nvec->tx_data);
 272        spin_unlock_irqrestore(&nvec->tx_lock, flags);
 273
 274        schedule_work(&nvec->tx_work);
 275
 276        return 0;
 277}
 278EXPORT_SYMBOL(nvec_write_async);
 279
 280/**
 281 * nvec_write_sync - Write a message to nvec and read the response
 282 * @nvec: An &struct nvec_chip
 283 * @data: The data to write
 284 * @size: The size of @data
 285 * @msg:  The response message received
 286 *
 287 * This is similar to nvec_write_async(), but waits for the
 288 * request to be answered before returning. This function
 289 * uses a mutex and can thus not be called from e.g.
 290 * interrupt handlers.
 291 *
 292 * Returns: 0 on success, a negative error code on failure.
 293 * The response message is returned in @msg. Shall be freed
 294 * with nvec_msg_free() once no longer used.
 295 *
 296 */
 297int nvec_write_sync(struct nvec_chip *nvec,
 298                    const unsigned char *data, short size,
 299                    struct nvec_msg **msg)
 300{
 301        mutex_lock(&nvec->sync_write_mutex);
 302
 303        *msg = NULL;
 304        nvec->sync_write_pending = (data[1] << 8) + data[0];
 305
 306        if (nvec_write_async(nvec, data, size) < 0) {
 307                mutex_unlock(&nvec->sync_write_mutex);
 308                return -ENOMEM;
 309        }
 310
 311        dev_dbg(nvec->dev, "nvec_sync_write: 0x%04x\n",
 312                nvec->sync_write_pending);
 313        if (!(wait_for_completion_timeout(&nvec->sync_write,
 314                                          msecs_to_jiffies(2000)))) {
 315                dev_warn(nvec->dev,
 316                         "timeout waiting for sync write to complete\n");
 317                mutex_unlock(&nvec->sync_write_mutex);
 318                return -ETIMEDOUT;
 319        }
 320
 321        dev_dbg(nvec->dev, "nvec_sync_write: pong!\n");
 322
 323        *msg = nvec->last_sync_msg;
 324
 325        mutex_unlock(&nvec->sync_write_mutex);
 326
 327        return 0;
 328}
 329EXPORT_SYMBOL(nvec_write_sync);
 330
 331/**
 332 * nvec_toggle_global_events - enables or disables global event reporting
 333 * @nvec: nvec handle
 334 * @state: true for enable, false for disable
 335 *
 336 * This switches on/off global event reports by the embedded controller.
 337 */
 338static void nvec_toggle_global_events(struct nvec_chip *nvec, bool state)
 339{
 340        unsigned char global_events[] = { NVEC_SLEEP, GLOBAL_EVENTS, state };
 341
 342        nvec_write_async(nvec, global_events, 3);
 343}
 344
 345/**
 346 * nvec_event_mask - fill the command string with event bitfield
 347 * @ev: points to event command string
 348 * @mask: bit to insert into the event mask
 349 *
 350 * Configure event command expects a 32 bit bitfield which describes
 351 * which events to enable. The bitfield has the following structure
 352 * (from highest byte to lowest):
 353 *      system state bits 7-0
 354 *      system state bits 15-8
 355 *      oem system state bits 7-0
 356 *      oem system state bits 15-8
 357 */
 358static void nvec_event_mask(char *ev, u32 mask)
 359{
 360        ev[3] = mask >> 16 & 0xff;
 361        ev[4] = mask >> 24 & 0xff;
 362        ev[5] = mask >> 0  & 0xff;
 363        ev[6] = mask >> 8  & 0xff;
 364}
 365
 366/**
 367 * nvec_request_master - Process outgoing messages
 368 * @work: A &struct work_struct (the tx_worker member of &struct nvec_chip)
 369 *
 370 * Processes all outgoing requests by sending the request and awaiting the
 371 * response, then continuing with the next request. Once a request has a
 372 * matching response, it will be freed and removed from the list.
 373 */
 374static void nvec_request_master(struct work_struct *work)
 375{
 376        struct nvec_chip *nvec = container_of(work, struct nvec_chip, tx_work);
 377        unsigned long flags;
 378        long err;
 379        struct nvec_msg *msg;
 380
 381        spin_lock_irqsave(&nvec->tx_lock, flags);
 382        while (!list_empty(&nvec->tx_data)) {
 383                msg = list_first_entry(&nvec->tx_data, struct nvec_msg, node);
 384                spin_unlock_irqrestore(&nvec->tx_lock, flags);
 385                nvec_gpio_set_value(nvec, 0);
 386                err = wait_for_completion_interruptible_timeout(
 387                                &nvec->ec_transfer, msecs_to_jiffies(5000));
 388
 389                if (err == 0) {
 390                        dev_warn(nvec->dev, "timeout waiting for ec transfer\n");
 391                        nvec_gpio_set_value(nvec, 1);
 392                        msg->pos = 0;
 393                }
 394
 395                spin_lock_irqsave(&nvec->tx_lock, flags);
 396
 397                if (err > 0) {
 398                        list_del_init(&msg->node);
 399                        nvec_msg_free(nvec, msg);
 400                }
 401        }
 402        spin_unlock_irqrestore(&nvec->tx_lock, flags);
 403}
 404
 405/**
 406 * parse_msg - Print some information and call the notifiers on an RX message
 407 * @nvec: A &struct nvec_chip
 408 * @msg: A message received by @nvec
 409 *
 410 * Paarse some pieces of the message and then call the chain of notifiers
 411 * registered via nvec_register_notifier.
 412 */
 413static int parse_msg(struct nvec_chip *nvec, struct nvec_msg *msg)
 414{
 415        if ((msg->data[0] & 1 << 7) == 0 && msg->data[3]) {
 416                dev_err(nvec->dev, "ec responded %*ph\n", 4, msg->data);
 417                return -EINVAL;
 418        }
 419
 420        if ((msg->data[0] >> 7) == 1 && (msg->data[0] & 0x0f) == 5)
 421                print_hex_dump(KERN_WARNING, "ec system event ",
 422                               DUMP_PREFIX_NONE, 16, 1, msg->data,
 423                               msg->data[1] + 2, true);
 424
 425        atomic_notifier_call_chain(&nvec->notifier_list, msg->data[0] & 0x8f,
 426                                   msg->data);
 427
 428        return 0;
 429}
 430
 431/**
 432 * nvec_dispatch - Process messages received from the EC
 433 * @work: A &struct work_struct (the tx_worker member of &struct nvec_chip)
 434 *
 435 * Process messages previously received from the EC and put into the RX
 436 * queue of the &struct nvec_chip instance associated with @work.
 437 */
 438static void nvec_dispatch(struct work_struct *work)
 439{
 440        struct nvec_chip *nvec = container_of(work, struct nvec_chip, rx_work);
 441        unsigned long flags;
 442        struct nvec_msg *msg;
 443
 444        spin_lock_irqsave(&nvec->rx_lock, flags);
 445        while (!list_empty(&nvec->rx_data)) {
 446                msg = list_first_entry(&nvec->rx_data, struct nvec_msg, node);
 447                list_del_init(&msg->node);
 448                spin_unlock_irqrestore(&nvec->rx_lock, flags);
 449
 450                if (nvec->sync_write_pending ==
 451                      (msg->data[2] << 8) + msg->data[0]) {
 452                        dev_dbg(nvec->dev, "sync write completed!\n");
 453                        nvec->sync_write_pending = 0;
 454                        nvec->last_sync_msg = msg;
 455                        complete(&nvec->sync_write);
 456                } else {
 457                        parse_msg(nvec, msg);
 458                        nvec_msg_free(nvec, msg);
 459                }
 460                spin_lock_irqsave(&nvec->rx_lock, flags);
 461        }
 462        spin_unlock_irqrestore(&nvec->rx_lock, flags);
 463}
 464
 465/**
 466 * nvec_tx_completed - Complete the current transfer
 467 * @nvec: A &struct nvec_chip
 468 *
 469 * This is called when we have received an END_TRANS on a TX transfer.
 470 */
 471static void nvec_tx_completed(struct nvec_chip *nvec)
 472{
 473        /* We got an END_TRANS, let's skip this, maybe there's an event */
 474        if (nvec->tx->pos != nvec->tx->size) {
 475                dev_err(nvec->dev, "premature END_TRANS, resending\n");
 476                nvec->tx->pos = 0;
 477                nvec_gpio_set_value(nvec, 0);
 478        } else {
 479                nvec->state = 0;
 480        }
 481}
 482
 483/**
 484 * nvec_rx_completed - Complete the current transfer
 485 * @nvec: A &struct nvec_chip
 486 *
 487 * This is called when we have received an END_TRANS on a RX transfer.
 488 */
 489static void nvec_rx_completed(struct nvec_chip *nvec)
 490{
 491        if (nvec->rx->pos != nvec_msg_size(nvec->rx)) {
 492                dev_err(nvec->dev, "RX incomplete: Expected %u bytes, got %u\n",
 493                        (uint)nvec_msg_size(nvec->rx),
 494                        (uint)nvec->rx->pos);
 495
 496                nvec_msg_free(nvec, nvec->rx);
 497                nvec->state = 0;
 498
 499                /* Battery quirk - Often incomplete, and likes to crash */
 500                if (nvec->rx->data[0] == NVEC_BAT)
 501                        complete(&nvec->ec_transfer);
 502
 503                return;
 504        }
 505
 506        spin_lock(&nvec->rx_lock);
 507
 508        /*
 509         * Add the received data to the work list and move the ring buffer
 510         * pointer to the next entry.
 511         */
 512        list_add_tail(&nvec->rx->node, &nvec->rx_data);
 513
 514        spin_unlock(&nvec->rx_lock);
 515
 516        nvec->state = 0;
 517
 518        if (!nvec_msg_is_event(nvec->rx))
 519                complete(&nvec->ec_transfer);
 520
 521        schedule_work(&nvec->rx_work);
 522}
 523
 524/**
 525 * nvec_invalid_flags - Send an error message about invalid flags and jump
 526 * @nvec: The nvec device
 527 * @status: The status flags
 528 * @reset: Whether we shall jump to state 0.
 529 */
 530static void nvec_invalid_flags(struct nvec_chip *nvec, unsigned int status,
 531                               bool reset)
 532{
 533        dev_err(nvec->dev, "unexpected status flags 0x%02x during state %i\n",
 534                status, nvec->state);
 535        if (reset)
 536                nvec->state = 0;
 537}
 538
 539/**
 540 * nvec_tx_set - Set the message to transfer (nvec->tx)
 541 * @nvec: A &struct nvec_chip
 542 *
 543 * Gets the first entry from the tx_data list of @nvec and sets the
 544 * tx member to it. If the tx_data list is empty, this uses the
 545 * tx_scratch message to send a no operation message.
 546 */
 547static void nvec_tx_set(struct nvec_chip *nvec)
 548{
 549        spin_lock(&nvec->tx_lock);
 550        if (list_empty(&nvec->tx_data)) {
 551                dev_err(nvec->dev, "empty tx - sending no-op\n");
 552                memcpy(nvec->tx_scratch.data, "\x02\x07\x02", 3);
 553                nvec->tx_scratch.size = 3;
 554                nvec->tx_scratch.pos = 0;
 555                nvec->tx = &nvec->tx_scratch;
 556                list_add_tail(&nvec->tx->node, &nvec->tx_data);
 557        } else {
 558                nvec->tx = list_first_entry(&nvec->tx_data, struct nvec_msg,
 559                                            node);
 560                nvec->tx->pos = 0;
 561        }
 562        spin_unlock(&nvec->tx_lock);
 563
 564        dev_dbg(nvec->dev, "Sending message of length %u, command 0x%x\n",
 565                (uint)nvec->tx->size, nvec->tx->data[1]);
 566}
 567
 568/**
 569 * nvec_interrupt - Interrupt handler
 570 * @irq: The IRQ
 571 * @dev: The nvec device
 572 *
 573 * Interrupt handler that fills our RX buffers and empties our TX
 574 * buffers. This uses a finite state machine with ridiculous amounts
 575 * of error checking, in order to be fairly reliable.
 576 */
 577static irqreturn_t nvec_interrupt(int irq, void *dev)
 578{
 579        unsigned long status;
 580        unsigned int received = 0;
 581        unsigned char to_send = 0xff;
 582        const unsigned long irq_mask = I2C_SL_IRQ | END_TRANS | RCVD | RNW;
 583        struct nvec_chip *nvec = dev;
 584        unsigned int state = nvec->state;
 585
 586        status = readl(nvec->base + I2C_SL_STATUS);
 587
 588        /* Filter out some errors */
 589        if ((status & irq_mask) == 0 && (status & ~irq_mask) != 0) {
 590                dev_err(nvec->dev, "unexpected irq mask %lx\n", status);
 591                return IRQ_HANDLED;
 592        }
 593        if ((status & I2C_SL_IRQ) == 0) {
 594                dev_err(nvec->dev, "Spurious IRQ\n");
 595                return IRQ_HANDLED;
 596        }
 597
 598        /* The EC did not request a read, so it send us something, read it */
 599        if ((status & RNW) == 0) {
 600                received = readl(nvec->base + I2C_SL_RCVD);
 601                if (status & RCVD)
 602                        writel(0, nvec->base + I2C_SL_RCVD);
 603        }
 604
 605        if (status == (I2C_SL_IRQ | RCVD))
 606                nvec->state = 0;
 607
 608        switch (nvec->state) {
 609        case 0:         /* Verify that its a transfer start, the rest later */
 610                if (status != (I2C_SL_IRQ | RCVD))
 611                        nvec_invalid_flags(nvec, status, false);
 612                break;
 613        case 1:         /* command byte */
 614                if (status != I2C_SL_IRQ) {
 615                        nvec_invalid_flags(nvec, status, true);
 616                } else {
 617                        nvec->rx = nvec_msg_alloc(nvec, NVEC_MSG_RX);
 618                        /* Should not happen in a normal world */
 619                        if (unlikely(!nvec->rx)) {
 620                                nvec->state = 0;
 621                                break;
 622                        }
 623                        nvec->rx->data[0] = received;
 624                        nvec->rx->pos = 1;
 625                        nvec->state = 2;
 626                }
 627                break;
 628        case 2:         /* first byte after command */
 629                if (status == (I2C_SL_IRQ | RNW | RCVD)) {
 630                        udelay(33);
 631                        if (nvec->rx->data[0] != 0x01) {
 632                                dev_err(nvec->dev,
 633                                        "Read without prior read command\n");
 634                                nvec->state = 0;
 635                                break;
 636                        }
 637                        nvec_msg_free(nvec, nvec->rx);
 638                        nvec->state = 3;
 639                        nvec_tx_set(nvec);
 640                        to_send = nvec->tx->data[0];
 641                        nvec->tx->pos = 1;
 642                } else if (status == (I2C_SL_IRQ)) {
 643                        nvec->rx->data[1] = received;
 644                        nvec->rx->pos = 2;
 645                        nvec->state = 4;
 646                } else {
 647                        nvec_invalid_flags(nvec, status, true);
 648                }
 649                break;
 650        case 3:         /* EC does a block read, we transmit data */
 651                if (status & END_TRANS) {
 652                        nvec_tx_completed(nvec);
 653                } else if ((status & RNW) == 0 || (status & RCVD)) {
 654                        nvec_invalid_flags(nvec, status, true);
 655                } else if (nvec->tx && nvec->tx->pos < nvec->tx->size) {
 656                        to_send = nvec->tx->data[nvec->tx->pos++];
 657                } else {
 658                        dev_err(nvec->dev,
 659                                "tx buffer underflow on %p (%u > %u)\n",
 660                                nvec->tx,
 661                                (uint)(nvec->tx ? nvec->tx->pos : 0),
 662                                (uint)(nvec->tx ? nvec->tx->size : 0));
 663                        nvec->state = 0;
 664                }
 665                break;
 666        case 4:         /* EC does some write, we read the data */
 667                if ((status & (END_TRANS | RNW)) == END_TRANS)
 668                        nvec_rx_completed(nvec);
 669                else if (status & (RNW | RCVD))
 670                        nvec_invalid_flags(nvec, status, true);
 671                else if (nvec->rx && nvec->rx->pos < NVEC_MSG_SIZE)
 672                        nvec->rx->data[nvec->rx->pos++] = received;
 673                else
 674                        dev_err(nvec->dev,
 675                                "RX buffer overflow on %p: Trying to write byte %u of %u\n",
 676                                nvec->rx, nvec->rx ? nvec->rx->pos : 0,
 677                                NVEC_MSG_SIZE);
 678                break;
 679        default:
 680                nvec->state = 0;
 681        }
 682
 683        /* If we are told that a new transfer starts, verify it */
 684        if ((status & (RCVD | RNW)) == RCVD) {
 685                if (received != nvec->i2c_addr)
 686                        dev_err(nvec->dev,
 687                                "received address 0x%02x, expected 0x%02x\n",
 688                                received, nvec->i2c_addr);
 689                nvec->state = 1;
 690        }
 691
 692        /* Send data if requested, but not on end of transmission */
 693        if ((status & (RNW | END_TRANS)) == RNW)
 694                writel(to_send, nvec->base + I2C_SL_RCVD);
 695
 696        /* If we have send the first byte */
 697        if (status == (I2C_SL_IRQ | RNW | RCVD))
 698                nvec_gpio_set_value(nvec, 1);
 699
 700        dev_dbg(nvec->dev,
 701                "Handled: %s 0x%02x, %s 0x%02x in state %u [%s%s%s]\n",
 702                (status & RNW) == 0 ? "received" : "R=",
 703                received,
 704                (status & (RNW | END_TRANS)) ? "sent" : "S=",
 705                to_send,
 706                state,
 707                status & END_TRANS ? " END_TRANS" : "",
 708                status & RCVD ? " RCVD" : "",
 709                status & RNW ? " RNW" : "");
 710
 711        /*
 712         * TODO: A correct fix needs to be found for this.
 713         *
 714         * We experience less incomplete messages with this delay than without
 715         * it, but we don't know why. Help is appreciated.
 716         */
 717        udelay(100);
 718
 719        return IRQ_HANDLED;
 720}
 721
 722static void tegra_init_i2c_slave(struct nvec_chip *nvec)
 723{
 724        u32 val;
 725
 726        clk_prepare_enable(nvec->i2c_clk);
 727
 728        reset_control_assert(nvec->rst);
 729        udelay(2);
 730        reset_control_deassert(nvec->rst);
 731
 732        val = I2C_CNFG_NEW_MASTER_SFM | I2C_CNFG_PACKET_MODE_EN |
 733            (0x2 << I2C_CNFG_DEBOUNCE_CNT_SHIFT);
 734        writel(val, nvec->base + I2C_CNFG);
 735
 736        clk_set_rate(nvec->i2c_clk, 8 * 80000);
 737
 738        writel(I2C_SL_NEWSL, nvec->base + I2C_SL_CNFG);
 739        writel(0x1E, nvec->base + I2C_SL_DELAY_COUNT);
 740
 741        writel(nvec->i2c_addr >> 1, nvec->base + I2C_SL_ADDR1);
 742        writel(0, nvec->base + I2C_SL_ADDR2);
 743
 744        enable_irq(nvec->irq);
 745}
 746
 747#ifdef CONFIG_PM_SLEEP
 748static void nvec_disable_i2c_slave(struct nvec_chip *nvec)
 749{
 750        disable_irq(nvec->irq);
 751        writel(I2C_SL_NEWSL | I2C_SL_NACK, nvec->base + I2C_SL_CNFG);
 752        clk_disable_unprepare(nvec->i2c_clk);
 753}
 754#endif
 755
 756static void nvec_power_off(void)
 757{
 758        char ap_pwr_down[] = { NVEC_SLEEP, AP_PWR_DOWN };
 759
 760        nvec_toggle_global_events(nvec_power_handle, false);
 761        nvec_write_async(nvec_power_handle, ap_pwr_down, 2);
 762}
 763
 764static int tegra_nvec_probe(struct platform_device *pdev)
 765{
 766        int err, ret;
 767        struct clk *i2c_clk;
 768        struct device *dev = &pdev->dev;
 769        struct nvec_chip *nvec;
 770        struct nvec_msg *msg;
 771        void __iomem *base;
 772        char    get_firmware_version[] = { NVEC_CNTL, GET_FIRMWARE_VERSION },
 773                unmute_speakers[] = { NVEC_OEM0, 0x10, 0x59, 0x95 },
 774                enable_event[7] = { NVEC_SYS, CNF_EVENT_REPORTING, true };
 775
 776        if (!dev->of_node) {
 777                dev_err(dev, "must be instantiated using device tree\n");
 778                return -ENODEV;
 779        }
 780
 781        nvec = devm_kzalloc(dev, sizeof(struct nvec_chip), GFP_KERNEL);
 782        if (!nvec)
 783                return -ENOMEM;
 784
 785        platform_set_drvdata(pdev, nvec);
 786        nvec->dev = dev;
 787
 788        if (of_property_read_u32(dev->of_node, "slave-addr", &nvec->i2c_addr)) {
 789                dev_err(dev, "no i2c address specified");
 790                return -ENODEV;
 791        }
 792
 793        base = devm_platform_ioremap_resource(pdev, 0);
 794        if (IS_ERR(base))
 795                return PTR_ERR(base);
 796
 797        nvec->irq = platform_get_irq(pdev, 0);
 798        if (nvec->irq < 0)
 799                return -ENODEV;
 800
 801        i2c_clk = devm_clk_get(dev, "div-clk");
 802        if (IS_ERR(i2c_clk)) {
 803                dev_err(dev, "failed to get controller clock\n");
 804                return -ENODEV;
 805        }
 806
 807        nvec->rst = devm_reset_control_get_exclusive(dev, "i2c");
 808        if (IS_ERR(nvec->rst)) {
 809                dev_err(dev, "failed to get controller reset\n");
 810                return PTR_ERR(nvec->rst);
 811        }
 812
 813        nvec->base = base;
 814        nvec->i2c_clk = i2c_clk;
 815        nvec->rx = &nvec->msg_pool[0];
 816
 817        ATOMIC_INIT_NOTIFIER_HEAD(&nvec->notifier_list);
 818
 819        init_completion(&nvec->sync_write);
 820        init_completion(&nvec->ec_transfer);
 821        mutex_init(&nvec->sync_write_mutex);
 822        spin_lock_init(&nvec->tx_lock);
 823        spin_lock_init(&nvec->rx_lock);
 824        INIT_LIST_HEAD(&nvec->rx_data);
 825        INIT_LIST_HEAD(&nvec->tx_data);
 826        INIT_WORK(&nvec->rx_work, nvec_dispatch);
 827        INIT_WORK(&nvec->tx_work, nvec_request_master);
 828
 829        nvec->gpiod = devm_gpiod_get(dev, "request", GPIOD_OUT_HIGH);
 830        if (IS_ERR(nvec->gpiod)) {
 831                dev_err(dev, "couldn't request gpio\n");
 832                return PTR_ERR(nvec->gpiod);
 833        }
 834
 835        err = devm_request_irq(dev, nvec->irq, nvec_interrupt, 0,
 836                               "nvec", nvec);
 837        if (err) {
 838                dev_err(dev, "couldn't request irq\n");
 839                return -ENODEV;
 840        }
 841        disable_irq(nvec->irq);
 842
 843        tegra_init_i2c_slave(nvec);
 844
 845        /* enable event reporting */
 846        nvec_toggle_global_events(nvec, true);
 847
 848        nvec->nvec_status_notifier.notifier_call = nvec_status_notifier;
 849        nvec_register_notifier(nvec, &nvec->nvec_status_notifier, 0);
 850
 851        nvec_power_handle = nvec;
 852        pm_power_off = nvec_power_off;
 853
 854        /* Get Firmware Version */
 855        err = nvec_write_sync(nvec, get_firmware_version, 2, &msg);
 856
 857        if (!err) {
 858                dev_warn(dev,
 859                         "ec firmware version %02x.%02x.%02x / %02x\n",
 860                         msg->data[4], msg->data[5],
 861                         msg->data[6], msg->data[7]);
 862
 863                nvec_msg_free(nvec, msg);
 864        }
 865
 866        ret = mfd_add_devices(dev, 0, nvec_devices,
 867                              ARRAY_SIZE(nvec_devices), NULL, 0, NULL);
 868        if (ret)
 869                dev_err(dev, "error adding subdevices\n");
 870
 871        /* unmute speakers? */
 872        nvec_write_async(nvec, unmute_speakers, 4);
 873
 874        /* enable lid switch event */
 875        nvec_event_mask(enable_event, LID_SWITCH);
 876        nvec_write_async(nvec, enable_event, 7);
 877
 878        /* enable power button event */
 879        nvec_event_mask(enable_event, PWR_BUTTON);
 880        nvec_write_async(nvec, enable_event, 7);
 881
 882        return 0;
 883}
 884
 885static int tegra_nvec_remove(struct platform_device *pdev)
 886{
 887        struct nvec_chip *nvec = platform_get_drvdata(pdev);
 888
 889        nvec_toggle_global_events(nvec, false);
 890        mfd_remove_devices(nvec->dev);
 891        nvec_unregister_notifier(nvec, &nvec->nvec_status_notifier);
 892        cancel_work_sync(&nvec->rx_work);
 893        cancel_work_sync(&nvec->tx_work);
 894        /* FIXME: needs check whether nvec is responsible for power off */
 895        pm_power_off = NULL;
 896
 897        return 0;
 898}
 899
 900#ifdef CONFIG_PM_SLEEP
 901static int nvec_suspend(struct device *dev)
 902{
 903        int err;
 904        struct nvec_chip *nvec = dev_get_drvdata(dev);
 905        struct nvec_msg *msg;
 906        char ap_suspend[] = { NVEC_SLEEP, AP_SUSPEND };
 907
 908        dev_dbg(nvec->dev, "suspending\n");
 909
 910        /* keep these sync or you'll break suspend */
 911        nvec_toggle_global_events(nvec, false);
 912
 913        err = nvec_write_sync(nvec, ap_suspend, sizeof(ap_suspend), &msg);
 914        if (!err)
 915                nvec_msg_free(nvec, msg);
 916
 917        nvec_disable_i2c_slave(nvec);
 918
 919        return 0;
 920}
 921
 922static int nvec_resume(struct device *dev)
 923{
 924        struct nvec_chip *nvec = dev_get_drvdata(dev);
 925
 926        dev_dbg(nvec->dev, "resuming\n");
 927        tegra_init_i2c_slave(nvec);
 928        nvec_toggle_global_events(nvec, true);
 929
 930        return 0;
 931}
 932#endif
 933
 934static SIMPLE_DEV_PM_OPS(nvec_pm_ops, nvec_suspend, nvec_resume);
 935
 936/* Match table for of_platform binding */
 937static const struct of_device_id nvidia_nvec_of_match[] = {
 938        { .compatible = "nvidia,nvec", },
 939        {},
 940};
 941MODULE_DEVICE_TABLE(of, nvidia_nvec_of_match);
 942
 943static struct platform_driver nvec_device_driver = {
 944        .probe   = tegra_nvec_probe,
 945        .remove  = tegra_nvec_remove,
 946        .driver  = {
 947                .name = "nvec",
 948                .pm = &nvec_pm_ops,
 949                .of_match_table = nvidia_nvec_of_match,
 950        }
 951};
 952
 953module_platform_driver(nvec_device_driver);
 954
 955MODULE_ALIAS("platform:nvec");
 956MODULE_DESCRIPTION("NVIDIA compliant embedded controller interface");
 957MODULE_AUTHOR("Marc Dietrich <marvin24@gmx.de>");
 958MODULE_LICENSE("GPL");
 959