linux/drivers/scsi/aic7xxx/aic7770.c
<<
>>
Prefs
   1/*
   2 * Product specific probe and attach routines for:
   3 *      27/284X and aic7770 motherboard SCSI controllers
   4 *
   5 * Copyright (c) 1994-1998, 2000, 2001 Justin T. Gibbs.
   6 * All rights reserved.
   7 *
   8 * Redistribution and use in source and binary forms, with or without
   9 * modification, are permitted provided that the following conditions
  10 * are met:
  11 * 1. Redistributions of source code must retain the above copyright
  12 *    notice, this list of conditions, and the following disclaimer,
  13 *    without modification.
  14 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  15 *    substantially similar to the "NO WARRANTY" disclaimer below
  16 *    ("Disclaimer") and any redistribution must be conditioned upon
  17 *    including a substantially similar Disclaimer requirement for further
  18 *    binary redistribution.
  19 * 3. Neither the names of the above-listed copyright holders nor the names
  20 *    of any contributors may be used to endorse or promote products derived
  21 *    from this software without specific prior written permission.
  22 *
  23 * Alternatively, this software may be distributed under the terms of the
  24 * GNU General Public License ("GPL") version 2 as published by the Free
  25 * Software Foundation.
  26 *
  27 * NO WARRANTY
  28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  32 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  33 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  34 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  35 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  36 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  37 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  38 * POSSIBILITY OF SUCH DAMAGES.
  39 *
  40 * $Id: //depot/aic7xxx/aic7xxx/aic7770.c#32 $
  41 *
  42 * $FreeBSD$
  43 */
  44
  45#include "aic7xxx_osm.h"
  46#include "aic7xxx_inline.h"
  47#include "aic7xxx_93cx6.h"
  48
  49#define ID_AIC7770      0x04907770
  50#define ID_AHA_274x     0x04907771
  51#define ID_AHA_284xB    0x04907756 /* BIOS enabled */
  52#define ID_AHA_284x     0x04907757 /* BIOS disabled*/
  53#define ID_OLV_274x     0x04907782 /* Olivetti OEM */
  54#define ID_OLV_274xD    0x04907783 /* Olivetti OEM (Differential) */
  55
  56static int aic7770_chip_init(struct ahc_softc *ahc);
  57static int aha2840_load_seeprom(struct ahc_softc *ahc);
  58static ahc_device_setup_t ahc_aic7770_VL_setup;
  59static ahc_device_setup_t ahc_aic7770_EISA_setup;
  60static ahc_device_setup_t ahc_aic7770_setup;
  61
  62struct aic7770_identity aic7770_ident_table[] =
  63{
  64        {
  65                ID_AHA_274x,
  66                0xFFFFFFFF,
  67                "Adaptec 274X SCSI adapter",
  68                ahc_aic7770_EISA_setup
  69        },
  70        {
  71                ID_AHA_284xB,
  72                0xFFFFFFFE,
  73                "Adaptec 284X SCSI adapter",
  74                ahc_aic7770_VL_setup
  75        },
  76        {
  77                ID_AHA_284x,
  78                0xFFFFFFFE,
  79                "Adaptec 284X SCSI adapter (BIOS Disabled)",
  80                ahc_aic7770_VL_setup
  81        },
  82        {
  83                ID_OLV_274x,
  84                0xFFFFFFFF,
  85                "Adaptec (Olivetti OEM) 274X SCSI adapter",
  86                ahc_aic7770_EISA_setup
  87        },
  88        {
  89                ID_OLV_274xD,
  90                0xFFFFFFFF,
  91                "Adaptec (Olivetti OEM) 274X Differential SCSI adapter",
  92                ahc_aic7770_EISA_setup
  93        },
  94        /* Generic chip probes for devices we don't know 'exactly' */
  95        {
  96                ID_AIC7770,
  97                0xFFFFFFFF,
  98                "Adaptec aic7770 SCSI adapter",
  99                ahc_aic7770_EISA_setup
 100        }
 101};
 102const int ahc_num_aic7770_devs = ARRAY_SIZE(aic7770_ident_table);
 103
 104struct aic7770_identity *
 105aic7770_find_device(uint32_t id)
 106{
 107        struct  aic7770_identity *entry;
 108        int     i;
 109
 110        for (i = 0; i < ahc_num_aic7770_devs; i++) {
 111                entry = &aic7770_ident_table[i];
 112                if (entry->full_id == (id & entry->id_mask))
 113                        return (entry);
 114        }
 115        return (NULL);
 116}
 117
 118int
 119aic7770_config(struct ahc_softc *ahc, struct aic7770_identity *entry, u_int io)
 120{
 121        int     error;
 122        int     have_seeprom;
 123        u_int   hostconf;
 124        u_int   irq;
 125        u_int   intdef;
 126
 127        error = entry->setup(ahc);
 128        have_seeprom = 0;
 129        if (error != 0)
 130                return (error);
 131
 132        error = aic7770_map_registers(ahc, io);
 133        if (error != 0)
 134                return (error);
 135
 136        /*
 137         * Before we continue probing the card, ensure that
 138         * its interrupts are *disabled*.  We don't want
 139         * a misstep to hang the machine in an interrupt
 140         * storm.
 141         */
 142        ahc_intr_enable(ahc, FALSE);
 143
 144        ahc->description = entry->name;
 145        error = ahc_softc_init(ahc);
 146        if (error != 0)
 147                return (error);
 148
 149        ahc->bus_chip_init = aic7770_chip_init;
 150
 151        error = ahc_reset(ahc, /*reinit*/FALSE);
 152        if (error != 0)
 153                return (error);
 154
 155        /* Make sure we have a valid interrupt vector */
 156        intdef = ahc_inb(ahc, INTDEF);
 157        irq = intdef & VECTOR;
 158        switch (irq) {
 159        case 9:
 160        case 10:
 161        case 11:
 162        case 12:
 163        case 14:
 164        case 15:
 165                break;
 166        default:
 167                printk("aic7770_config: invalid irq setting %d\n", intdef);
 168                return (ENXIO);
 169        }
 170
 171        if ((intdef & EDGE_TRIG) != 0)
 172                ahc->flags |= AHC_EDGE_INTERRUPT;
 173
 174        switch (ahc->chip & (AHC_EISA|AHC_VL)) {
 175        case AHC_EISA:
 176        {
 177                u_int biosctrl;
 178                u_int scsiconf;
 179                u_int scsiconf1;
 180
 181                biosctrl = ahc_inb(ahc, HA_274_BIOSCTRL);
 182                scsiconf = ahc_inb(ahc, SCSICONF);
 183                scsiconf1 = ahc_inb(ahc, SCSICONF + 1);
 184
 185                /* Get the primary channel information */
 186                if ((biosctrl & CHANNEL_B_PRIMARY) != 0)
 187                        ahc->flags |= 1;
 188
 189                if ((biosctrl & BIOSMODE) == BIOSDISABLED) {
 190                        ahc->flags |= AHC_USEDEFAULTS;
 191                } else {
 192                        if ((ahc->features & AHC_WIDE) != 0) {
 193                                ahc->our_id = scsiconf1 & HWSCSIID;
 194                                if (scsiconf & TERM_ENB)
 195                                        ahc->flags |= AHC_TERM_ENB_A;
 196                        } else {
 197                                ahc->our_id = scsiconf & HSCSIID;
 198                                ahc->our_id_b = scsiconf1 & HSCSIID;
 199                                if (scsiconf & TERM_ENB)
 200                                        ahc->flags |= AHC_TERM_ENB_A;
 201                                if (scsiconf1 & TERM_ENB)
 202                                        ahc->flags |= AHC_TERM_ENB_B;
 203                        }
 204                }
 205                if ((ahc_inb(ahc, HA_274_BIOSGLOBAL) & HA_274_EXTENDED_TRANS))
 206                        ahc->flags |= AHC_EXTENDED_TRANS_A|AHC_EXTENDED_TRANS_B;
 207                break;
 208        }
 209        case AHC_VL:
 210        {
 211                have_seeprom = aha2840_load_seeprom(ahc);
 212                break;
 213        }
 214        default:
 215                break;
 216        }
 217        if (have_seeprom == 0) {
 218                kfree(ahc->seep_config);
 219                ahc->seep_config = NULL;
 220        }
 221
 222        /*
 223         * Ensure autoflush is enabled
 224         */
 225        ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) & ~AUTOFLUSHDIS);
 226
 227        /* Setup the FIFO threshold and the bus off time */
 228        hostconf = ahc_inb(ahc, HOSTCONF);
 229        ahc_outb(ahc, BUSSPD, hostconf & DFTHRSH);
 230        ahc_outb(ahc, BUSTIME, (hostconf << 2) & BOFF);
 231
 232        ahc->bus_softc.aic7770_softc.busspd = hostconf & DFTHRSH;
 233        ahc->bus_softc.aic7770_softc.bustime = (hostconf << 2) & BOFF;
 234
 235        /*
 236         * Generic aic7xxx initialization.
 237         */
 238        error = ahc_init(ahc);
 239        if (error != 0)
 240                return (error);
 241
 242        error = aic7770_map_int(ahc, irq);
 243        if (error != 0)
 244                return (error);
 245
 246        ahc->init_level++;
 247
 248        /*
 249         * Enable the board's BUS drivers
 250         */
 251        ahc_outb(ahc, BCTL, ENABLE);
 252        return (0);
 253}
 254
 255static int
 256aic7770_chip_init(struct ahc_softc *ahc)
 257{
 258        ahc_outb(ahc, BUSSPD, ahc->bus_softc.aic7770_softc.busspd);
 259        ahc_outb(ahc, BUSTIME, ahc->bus_softc.aic7770_softc.bustime);
 260        ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) & ~AUTOFLUSHDIS);
 261        ahc_outb(ahc, BCTL, ENABLE);
 262        return (ahc_chip_init(ahc));
 263}
 264
 265/*
 266 * Read the 284x SEEPROM.
 267 */
 268static int
 269aha2840_load_seeprom(struct ahc_softc *ahc)
 270{
 271        struct  seeprom_descriptor sd;
 272        struct  seeprom_config *sc;
 273        int     have_seeprom;
 274        uint8_t scsi_conf;
 275
 276        sd.sd_ahc = ahc;
 277        sd.sd_control_offset = SEECTL_2840;
 278        sd.sd_status_offset = STATUS_2840;
 279        sd.sd_dataout_offset = STATUS_2840;             
 280        sd.sd_chip = C46;
 281        sd.sd_MS = 0;
 282        sd.sd_RDY = EEPROM_TF;
 283        sd.sd_CS = CS_2840;
 284        sd.sd_CK = CK_2840;
 285        sd.sd_DO = DO_2840;
 286        sd.sd_DI = DI_2840;
 287        sc = ahc->seep_config;
 288
 289        if (bootverbose)
 290                printk("%s: Reading SEEPROM...", ahc_name(ahc));
 291        have_seeprom = ahc_read_seeprom(&sd, (uint16_t *)sc,
 292                                        /*start_addr*/0, sizeof(*sc)/2);
 293
 294        if (have_seeprom) {
 295
 296                if (ahc_verify_cksum(sc) == 0) {
 297                        if(bootverbose)
 298                                printk ("checksum error\n");
 299                        have_seeprom = 0;
 300                } else if (bootverbose) {
 301                        printk("done.\n");
 302                }
 303        }
 304
 305        if (!have_seeprom) {
 306                if (bootverbose)
 307                        printk("%s: No SEEPROM available\n", ahc_name(ahc));
 308                ahc->flags |= AHC_USEDEFAULTS;
 309        } else {
 310                /*
 311                 * Put the data we've collected down into SRAM
 312                 * where ahc_init will find it.
 313                 */
 314                int      i;
 315                int      max_targ;
 316                uint16_t discenable;
 317
 318                max_targ = (ahc->features & AHC_WIDE) != 0 ? 16 : 8;
 319                discenable = 0;
 320                for (i = 0; i < max_targ; i++){
 321                        uint8_t target_settings;
 322
 323                        target_settings = (sc->device_flags[i] & CFXFER) << 4;
 324                        if (sc->device_flags[i] & CFSYNCH)
 325                                target_settings |= SOFS;
 326                        if (sc->device_flags[i] & CFWIDEB)
 327                                target_settings |= WIDEXFER;
 328                        if (sc->device_flags[i] & CFDISC)
 329                                discenable |= (0x01 << i);
 330                        ahc_outb(ahc, TARG_SCSIRATE + i, target_settings);
 331                }
 332                ahc_outb(ahc, DISC_DSB, ~(discenable & 0xff));
 333                ahc_outb(ahc, DISC_DSB + 1, ~((discenable >> 8) & 0xff));
 334
 335                ahc->our_id = sc->brtime_id & CFSCSIID;
 336
 337                scsi_conf = (ahc->our_id & 0x7);
 338                if (sc->adapter_control & CFSPARITY)
 339                        scsi_conf |= ENSPCHK;
 340                if (sc->adapter_control & CFRESETB)
 341                        scsi_conf |= RESET_SCSI;
 342
 343                if (sc->bios_control & CF284XEXTEND)            
 344                        ahc->flags |= AHC_EXTENDED_TRANS_A;
 345                /* Set SCSICONF info */
 346                ahc_outb(ahc, SCSICONF, scsi_conf);
 347
 348                if (sc->adapter_control & CF284XSTERM)
 349                        ahc->flags |= AHC_TERM_ENB_A;
 350        }
 351        return (have_seeprom);
 352}
 353
 354static int
 355ahc_aic7770_VL_setup(struct ahc_softc *ahc)
 356{
 357        int error;
 358
 359        error = ahc_aic7770_setup(ahc);
 360        ahc->chip |= AHC_VL;
 361        return (error);
 362}
 363
 364static int
 365ahc_aic7770_EISA_setup(struct ahc_softc *ahc)
 366{
 367        int error;
 368
 369        error = ahc_aic7770_setup(ahc);
 370        ahc->chip |= AHC_EISA;
 371        return (error);
 372}
 373
 374static int
 375ahc_aic7770_setup(struct ahc_softc *ahc)
 376{
 377        ahc->channel = 'A';
 378        ahc->channel_b = 'B';
 379        ahc->chip = AHC_AIC7770;
 380        ahc->features = AHC_AIC7770_FE;
 381        ahc->bugs |= AHC_TMODE_WIDEODD_BUG;
 382        ahc->flags |= AHC_PAGESCBS;
 383        ahc->instruction_ram_size = 448;
 384        return (0);
 385}
 386