// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2010,2015,2019 The Linux Foundation. All rights reserved.
 * Copyright (C) 2015 Linaro Ltd.
 */
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/cpumask.h>
#include <linux/export.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/qcom_scm.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
#include <linux/reset-controller.h>
#include <linux/arm-smccc.h>

#include "qcom_scm.h"

static bool download_mode = IS_ENABLED(CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT);
module_param(download_mode, bool, 0);

#define SCM_HAS_CORE_CLK        BIT(0)
#define SCM_HAS_IFACE_CLK       BIT(1)
#define SCM_HAS_BUS_CLK         BIT(2)

struct qcom_scm {
        struct device *dev;
        struct clk *core_clk;
        struct clk *iface_clk;
        struct clk *bus_clk;
        struct reset_controller_dev reset;

        u64 dload_mode_addr;
};

struct qcom_scm_current_perm_info {
        __le32 vmid;
        __le32 perm;
        __le64 ctx;
        __le32 ctx_size;
        __le32 unused;
};

struct qcom_scm_mem_map_info {
        __le64 mem_addr;
        __le64 mem_size;
};

/* Each bit configures cold/warm boot address for one of the 4 CPUs */
static const u8 qcom_scm_cpu_cold_bits[QCOM_SCM_BOOT_MAX_CPUS] = {
        0, BIT(0), BIT(3), BIT(5)
};
static const u8 qcom_scm_cpu_warm_bits[QCOM_SCM_BOOT_MAX_CPUS] = {
        BIT(2), BIT(1), BIT(4), BIT(6)
};

static const char * const qcom_scm_convention_names[] = {
        [SMC_CONVENTION_UNKNOWN] = "unknown",
        [SMC_CONVENTION_ARM_32] = "smc arm 32",
        [SMC_CONVENTION_ARM_64] = "smc arm 64",
        [SMC_CONVENTION_LEGACY] = "smc legacy",
};

static struct qcom_scm *__scm;

static int qcom_scm_clk_enable(void)
{
        int ret;

        ret = clk_prepare_enable(__scm->core_clk);
        if (ret)
                goto bail;

        ret = clk_prepare_enable(__scm->iface_clk);
        if (ret)
                goto disable_core;

        ret = clk_prepare_enable(__scm->bus_clk);
        if (ret)
                goto disable_iface;

        return 0;

disable_iface:
        clk_disable_unprepare(__scm->iface_clk);
disable_core:
        clk_disable_unprepare(__scm->core_clk);
bail:
        return ret;
}

static void qcom_scm_clk_disable(void)
{
        clk_disable_unprepare(__scm->core_clk);
        clk_disable_unprepare(__scm->iface_clk);
        clk_disable_unprepare(__scm->bus_clk);
}

enum qcom_scm_convention qcom_scm_convention = SMC_CONVENTION_UNKNOWN;
static DEFINE_SPINLOCK(scm_query_lock);

static enum qcom_scm_convention __get_convention(void)
{
        unsigned long flags;
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_INFO,
                .cmd = QCOM_SCM_INFO_IS_CALL_AVAIL,
                .args[0] = SCM_SMC_FNID(QCOM_SCM_SVC_INFO,
                                           QCOM_SCM_INFO_IS_CALL_AVAIL) |
                           (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT),
                .arginfo = QCOM_SCM_ARGS(1),
                .owner = ARM_SMCCC_OWNER_SIP,
        };
        struct qcom_scm_res res;
        enum qcom_scm_convention probed_convention;
        int ret;
        bool forced = false;

        if (likely(qcom_scm_convention != SMC_CONVENTION_UNKNOWN))
                return qcom_scm_convention;

        /*
         * Device isn't required as there is only one argument - no device
         * needed to dma_map_single to secure world
         */
        probed_convention = SMC_CONVENTION_ARM_64;
        ret = __scm_smc_call(NULL, &desc, probed_convention, &res, true);
        if (!ret && res.result[0] == 1)
                goto found;

        /*
         * Some SC7180 firmwares didn't implement the
         * QCOM_SCM_INFO_IS_CALL_AVAIL call, so we fallback to forcing ARM_64
         * calling conventions on these firmwares. Luckily we don't make any
         * early calls into the firmware on these SoCs so the device pointer
         * will be valid here to check if the compatible matches.
         */
        if (of_device_is_compatible(__scm ? __scm->dev->of_node : NULL, "qcom,scm-sc7180")) {
                forced = true;
                goto found;
        }

        probed_convention = SMC_CONVENTION_ARM_32;
        ret = __scm_smc_call(NULL, &desc, probed_convention, &res, true);
        if (!ret && res.result[0] == 1)
                goto found;

        probed_convention = SMC_CONVENTION_LEGACY;
found:
        spin_lock_irqsave(&scm_query_lock, flags);
        if (probed_convention != qcom_scm_convention) {
                qcom_scm_convention = probed_convention;
                pr_info("qcom_scm: convention: %s%s\n",
                        qcom_scm_convention_names[qcom_scm_convention],
                        forced ? " (forced)" : "");
        }
        spin_unlock_irqrestore(&scm_query_lock, flags);

        return qcom_scm_convention;
}

/**
 * qcom_scm_call() - Invoke a syscall in the secure world
 * @dev:        device
 * @desc:       Descriptor structure containing arguments and return values
 * @res:        Structure containing results from SMC/HVC call
 *
 * Sends a command to the SCM and waits for the command to finish processing.
 * This should *only* be called in pre-emptible context.
 */
static int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
                         struct qcom_scm_res *res)
{
        might_sleep();
        switch (__get_convention()) {
        case SMC_CONVENTION_ARM_32:
        case SMC_CONVENTION_ARM_64:
                return scm_smc_call(dev, desc, res, false);
        case SMC_CONVENTION_LEGACY:
                return scm_legacy_call(dev, desc, res);
        default:
                pr_err("Unknown current SCM calling convention.\n");
                return -EINVAL;
        }
}

/**
 * qcom_scm_call_atomic() - atomic variation of qcom_scm_call()
 * @dev:        device
 * @desc:       Descriptor structure containing arguments and return values
 * @res:        Structure containing results from SMC/HVC call
 *
 * Sends a command to the SCM and waits for the command to finish processing.
 * This can be called in atomic context.
 */
static int qcom_scm_call_atomic(struct device *dev,
                                const struct qcom_scm_desc *desc,
                                struct qcom_scm_res *res)
{
        switch (__get_convention()) {
        case SMC_CONVENTION_ARM_32:
        case SMC_CONVENTION_ARM_64:
                return scm_smc_call(dev, desc, res, true);
        case SMC_CONVENTION_LEGACY:
                return scm_legacy_call_atomic(dev, desc, res);
        default:
                pr_err("Unknown current SCM calling convention.\n");
                return -EINVAL;
        }
}

static bool __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
                                         u32 cmd_id)
{
        int ret;
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_INFO,
                .cmd = QCOM_SCM_INFO_IS_CALL_AVAIL,
                .owner = ARM_SMCCC_OWNER_SIP,
        };
        struct qcom_scm_res res;

        desc.arginfo = QCOM_SCM_ARGS(1);
        switch (__get_convention()) {
        case SMC_CONVENTION_ARM_32:
        case SMC_CONVENTION_ARM_64:
                desc.args[0] = SCM_SMC_FNID(svc_id, cmd_id) |
                                (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);
                break;
        case SMC_CONVENTION_LEGACY:
                desc.args[0] = SCM_LEGACY_FNID(svc_id, cmd_id);
                break;
        default:
                pr_err("Unknown SMC convention being used\n");
                return false;
        }

        ret = qcom_scm_call(dev, &desc, &res);

        return ret ? false : !!res.result[0];
}

static int qcom_scm_set_boot_addr(void *entry, const u8 *cpu_bits)
{
        int cpu;
        unsigned int flags = 0;
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_BOOT,
                .cmd = QCOM_SCM_BOOT_SET_ADDR,
                .arginfo = QCOM_SCM_ARGS(2),
                .owner = ARM_SMCCC_OWNER_SIP,
        };

        for_each_present_cpu(cpu) {
                if (cpu >= QCOM_SCM_BOOT_MAX_CPUS)
                        return -EINVAL;
                flags |= cpu_bits[cpu];
        }

        desc.args[0] = flags;
        desc.args[1] = virt_to_phys(entry);

        return qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL);
}

static int qcom_scm_set_boot_addr_mc(void *entry, unsigned int flags)
{
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_BOOT,
                .cmd = QCOM_SCM_BOOT_SET_ADDR_MC,
                .owner = ARM_SMCCC_OWNER_SIP,
                .arginfo = QCOM_SCM_ARGS(6),
                .args = {
                        virt_to_phys(entry),
                        /* Apply to all CPUs in all affinity levels */
                        ~0ULL, ~0ULL, ~0ULL, ~0ULL,
                        flags,
                },
        };

        /* Need a device for DMA of the additional arguments */
        if (!__scm || __get_convention() == SMC_CONVENTION_LEGACY)
                return -EOPNOTSUPP;

        return qcom_scm_call(__scm->dev, &desc, NULL);
}

/**
 * qcom_scm_set_warm_boot_addr() - Set the warm boot address for all cpus
 * @entry: Entry point function for the cpus
 *
 * Set the Linux entry point for the SCM to transfer control to when coming
 * out of a power down. CPU power down may be executed on cpuidle or hotplug.
 */
int qcom_scm_set_warm_boot_addr(void *entry)
{
        if (qcom_scm_set_boot_addr_mc(entry, QCOM_SCM_BOOT_MC_FLAG_WARMBOOT))
                /* Fallback to old SCM call */
                return qcom_scm_set_boot_addr(entry, qcom_scm_cpu_warm_bits);
        return 0;
}
EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);

/**
 * qcom_scm_set_cold_boot_addr() - Set the cold boot address for all cpus
 * @entry: Entry point function for the cpus
 */
int qcom_scm_set_cold_boot_addr(void *entry)
{
        if (qcom_scm_set_boot_addr_mc(entry, QCOM_SCM_BOOT_MC_FLAG_COLDBOOT))
                /* Fallback to old SCM call */
                return qcom_scm_set_boot_addr(entry, qcom_scm_cpu_cold_bits);
        return 0;
}
EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);

/**
 * qcom_scm_cpu_power_down() - Power down the cpu
 * @flags:      Flags to flush cache
 *
 * This is an end point to power down cpu. If there was a pending interrupt,
 * the control would return from this function, otherwise, the cpu jumps to the
 * warm boot entry point set for this cpu upon reset.
 */
void qcom_scm_cpu_power_down(u32 flags)
{
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_BOOT,
                .cmd = QCOM_SCM_BOOT_TERMINATE_PC,
                .args[0] = flags & QCOM_SCM_FLUSH_FLAG_MASK,
                .arginfo = QCOM_SCM_ARGS(1),
                .owner = ARM_SMCCC_OWNER_SIP,
        };

        qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_cpu_power_down);

int qcom_scm_set_remote_state(u32 state, u32 id)
{
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_BOOT,
                .cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE,
                .arginfo = QCOM_SCM_ARGS(2),
                .args[0] = state,
                .args[1] = id,
                .owner = ARM_SMCCC_OWNER_SIP,
        };
        struct qcom_scm_res res;
        int ret;

        ret = qcom_scm_call(__scm->dev, &desc, &res);

        return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_set_remote_state);

static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
{
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_BOOT,
                .cmd = QCOM_SCM_BOOT_SET_DLOAD_MODE,
                .arginfo = QCOM_SCM_ARGS(2),
                .args[0] = QCOM_SCM_BOOT_SET_DLOAD_MODE,
                .owner = ARM_SMCCC_OWNER_SIP,
        };

        desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;

        return qcom_scm_call_atomic(__scm->dev, &desc, NULL);
}

static void qcom_scm_set_download_mode(bool enable)
{
        bool avail;
        int ret = 0;

        avail = __qcom_scm_is_call_available(__scm->dev,
                                             QCOM_SCM_SVC_BOOT,
                                             QCOM_SCM_BOOT_SET_DLOAD_MODE);
        if (avail) {
                ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
        } else if (__scm->dload_mode_addr) {
                ret = qcom_scm_io_writel(__scm->dload_mode_addr,
                                enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
        } else {
                dev_err(__scm->dev,
                        "No available mechanism for setting download mode\n");
        }

        if (ret)
                dev_err(__scm->dev, "failed to set download mode: %d\n", ret);
}

/**
 * qcom_scm_pas_init_image() - Initialize peripheral authentication service
 *                             state machine for a given peripheral, using the
 *                             metadata
 * @peripheral: peripheral id
 * @metadata:   pointer to memory containing ELF header, program header table
 *              and optional blob of data used for authenticating the metadata
 *              and the rest of the firmware
 * @size:       size of the metadata
 * @ctx:        optional metadata context
 *
 * Return: 0 on success.
 *
 * Upon successful return, the PAS metadata context (@ctx) will be used to
 * track the metadata allocation, this needs to be released by invoking
 * qcom_scm_pas_metadata_release() by the caller.
 */
int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size,
                            struct qcom_scm_pas_metadata *ctx)
{
        dma_addr_t mdata_phys;
        void *mdata_buf;
        int ret;
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_PIL,
                .cmd = QCOM_SCM_PIL_PAS_INIT_IMAGE,
                .arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW),
                .args[0] = peripheral,
                .owner = ARM_SMCCC_OWNER_SIP,
        };
        struct qcom_scm_res res;

        /*
         * During the scm call memory protection will be enabled for the meta
         * data blob, so make sure it's physically contiguous, 4K aligned and
         * non-cachable to avoid XPU violations.
         */
        mdata_buf = dma_alloc_coherent(__scm->dev, size, &mdata_phys,
                                       GFP_KERNEL);
        if (!mdata_buf) {
                dev_err(__scm->dev, "Allocation of metadata buffer failed.\n");
                return -ENOMEM;
        }
        memcpy(mdata_buf, metadata, size);

        ret = qcom_scm_clk_enable();
        if (ret)
                goto out;

        desc.args[1] = mdata_phys;

        ret = qcom_scm_call(__scm->dev, &desc, &res);

        qcom_scm_clk_disable();

out:
        if (ret < 0 || !ctx) {
                dma_free_coherent(__scm->dev, size, mdata_buf, mdata_phys);
        } else if (ctx) {
                ctx->ptr = mdata_buf;
                ctx->phys = mdata_phys;
                ctx->size = size;
        }

        return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_pas_init_image);

/**
 * qcom_scm_pas_metadata_release() - release metadata context
 * @ctx:        metadata context
 */
void qcom_scm_pas_metadata_release(struct qcom_scm_pas_metadata *ctx)
{
        if (!ctx->ptr)
                return;

        dma_free_coherent(__scm->dev, ctx->size, ctx->ptr, ctx->phys);

        ctx->ptr = NULL;
        ctx->phys = 0;
        ctx->size = 0;
}
EXPORT_SYMBOL(qcom_scm_pas_metadata_release);

/**
 * qcom_scm_pas_mem_setup() - Prepare the memory related to a given peripheral
 *                            for firmware loading
 * @peripheral: peripheral id
 * @addr:       start address of memory area to prepare
 * @size:       size of the memory area to prepare
 *
 * Returns 0 on success.
 */
int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size)
{
        int ret;
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_PIL,
                .cmd = QCOM_SCM_PIL_PAS_MEM_SETUP,
                .arginfo = QCOM_SCM_ARGS(3),
                .args[0] = peripheral,
                .args[1] = addr,
                .args[2] = size,
                .owner = ARM_SMCCC_OWNER_SIP,
        };
        struct qcom_scm_res res;

        ret = qcom_scm_clk_enable();
        if (ret)
                return ret;

        ret = qcom_scm_call(__scm->dev, &desc, &res);
        qcom_scm_clk_disable();

        return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_pas_mem_setup);

/**
 * qcom_scm_pas_auth_and_reset() - Authenticate the given peripheral firmware
 *                                 and reset the remote processor
 * @peripheral: peripheral id
 *
 * Return 0 on success.
 */
int qcom_scm_pas_auth_and_reset(u32 peripheral)
{
        int ret;
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_PIL,
                .cmd = QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
                .arginfo = QCOM_SCM_ARGS(1),
                .args[0] = peripheral,
                .owner = ARM_SMCCC_OWNER_SIP,
        };
        struct qcom_scm_res res;

        ret = qcom_scm_clk_enable();
        if (ret)
                return ret;

        ret = qcom_scm_call(__scm->dev, &desc, &res);
        qcom_scm_clk_disable();

        return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_pas_auth_and_reset);

/**
 * qcom_scm_pas_shutdown() - Shut down the remote processor
 * @peripheral: peripheral id
 *
 * Returns 0 on success.
 */
int qcom_scm_pas_shutdown(u32 peripheral)
{
        int ret;
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_PIL,
                .cmd = QCOM_SCM_PIL_PAS_SHUTDOWN,
                .arginfo = QCOM_SCM_ARGS(1),
                .args[0] = peripheral,
                .owner = ARM_SMCCC_OWNER_SIP,
        };
        struct qcom_scm_res res;

        ret = qcom_scm_clk_enable();
        if (ret)
                return ret;

        ret = qcom_scm_call(__scm->dev, &desc, &res);

        qcom_scm_clk_disable();

        return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_pas_shutdown);

/**
 * qcom_scm_pas_supported() - Check if the peripheral authentication service is
 *                            available for the given peripherial
 * @peripheral: peripheral id
 *
 * Returns true if PAS is supported for this peripheral, otherwise false.
 */
bool qcom_scm_pas_supported(u32 peripheral)
{
        int ret;
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_PIL,
                .cmd = QCOM_SCM_PIL_PAS_IS_SUPPORTED,
                .arginfo = QCOM_SCM_ARGS(1),
                .args[0] = peripheral,
                .owner = ARM_SMCCC_OWNER_SIP,
        };
        struct qcom_scm_res res;

        if (!__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
                                          QCOM_SCM_PIL_PAS_IS_SUPPORTED))
                return false;

        ret = qcom_scm_call(__scm->dev, &desc, &res);

        return ret ? false : !!res.result[0];
}
EXPORT_SYMBOL(qcom_scm_pas_supported);

static int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
{
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_PIL,
                .cmd = QCOM_SCM_PIL_PAS_MSS_RESET,
                .arginfo = QCOM_SCM_ARGS(2),
                .args[0] = reset,
                .args[1] = 0,
                .owner = ARM_SMCCC_OWNER_SIP,
        };
        struct qcom_scm_res res;
        int ret;

        ret = qcom_scm_call(__scm->dev, &desc, &res);

        return ret ? : res.result[0];
}

static int qcom_scm_pas_reset_assert(struct reset_controller_dev *rcdev,
                                     unsigned long idx)
{
        if (idx != 0)
                return -EINVAL;

        return __qcom_scm_pas_mss_reset(__scm->dev, 1);
}

static int qcom_scm_pas_reset_deassert(struct reset_controller_dev *rcdev,
                                       unsigned long idx)
{
        if (idx != 0)
                return -EINVAL;

        return __qcom_scm_pas_mss_reset(__scm->dev, 0);
}

static const struct reset_control_ops qcom_scm_pas_reset_ops = {
        .assert = qcom_scm_pas_reset_assert,
        .deassert = qcom_scm_pas_reset_deassert,
};

int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val)
{
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_IO,
                .cmd = QCOM_SCM_IO_READ,
                .arginfo = QCOM_SCM_ARGS(1),
                .args[0] = addr,
                .owner = ARM_SMCCC_OWNER_SIP,
        };
        struct qcom_scm_res res;
        int ret;


        ret = qcom_scm_call_atomic(__scm->dev, &desc, &res);
        if (ret >= 0)
                *val = res.result[0];

        return ret < 0 ? ret : 0;
}
EXPORT_SYMBOL(qcom_scm_io_readl);

int qcom_scm_io_writel(phys_addr_t addr, unsigned int val)
{
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_IO,
                .cmd = QCOM_SCM_IO_WRITE,
                .arginfo = QCOM_SCM_ARGS(2),
                .args[0] = addr,
                .args[1] = val,
                .owner = ARM_SMCCC_OWNER_SIP,
        };

        return qcom_scm_call_atomic(__scm->dev, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_io_writel);

/**
 * qcom_scm_restore_sec_cfg_available() - Check if secure environment
 * supports restore security config interface.
 *
 * Return true if restore-cfg interface is supported, false if not.
 */
bool qcom_scm_restore_sec_cfg_available(void)
{
        return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_MP,
                                            QCOM_SCM_MP_RESTORE_SEC_CFG);
}
EXPORT_SYMBOL(qcom_scm_restore_sec_cfg_available);

int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare)
{
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_MP,
                .cmd = QCOM_SCM_MP_RESTORE_SEC_CFG,
                .arginfo = QCOM_SCM_ARGS(2),
                .args[0] = device_id,
                .args[1] = spare,
                .owner = ARM_SMCCC_OWNER_SIP,
        };
        struct qcom_scm_res res;
        int ret;

        ret = qcom_scm_call(__scm->dev, &desc, &res);

        return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_restore_sec_cfg);

int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size)
{
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_MP,
                .cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE,
                .arginfo = QCOM_SCM_ARGS(1),
                .args[0] = spare,
                .owner = ARM_SMCCC_OWNER_SIP,
        };
        struct qcom_scm_res res;
        int ret;

        ret = qcom_scm_call(__scm->dev, &desc, &res);

        if (size)
                *size = res.result[0];

        return ret ? : res.result[1];
}
EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_size);

int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare)
{
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_MP,
                .cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT,
                .arginfo = QCOM_SCM_ARGS(3, QCOM_SCM_RW, QCOM_SCM_VAL,
                                         QCOM_SCM_VAL),
                .args[0] = addr,
                .args[1] = size,
                .args[2] = spare,
                .owner = ARM_SMCCC_OWNER_SIP,
        };
        int ret;

        ret = qcom_scm_call(__scm->dev, &desc, NULL);

        /* the pg table has been initialized already, ignore the error */
        if (ret == -EPERM)
                ret = 0;

        return ret;
}
EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_init);

int qcom_scm_iommu_set_cp_pool_size(u32 spare, u32 size)
{
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_MP,
                .cmd = QCOM_SCM_MP_IOMMU_SET_CP_POOL_SIZE,
                .arginfo = QCOM_SCM_ARGS(2),
                .args[0] = size,
                .args[1] = spare,
                .owner = ARM_SMCCC_OWNER_SIP,
        };

        return qcom_scm_call(__scm->dev, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_iommu_set_cp_pool_size);

int qcom_scm_mem_protect_video_var(u32 cp_start, u32 cp_size,
                                   u32 cp_nonpixel_start,
                                   u32 cp_nonpixel_size)
{
        int ret;
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_MP,
                .cmd = QCOM_SCM_MP_VIDEO_VAR,
                .arginfo = QCOM_SCM_ARGS(4, QCOM_SCM_VAL, QCOM_SCM_VAL,
                                         QCOM_SCM_VAL, QCOM_SCM_VAL),
                .args[0] = cp_start,
                .args[1] = cp_size,
                .args[2] = cp_nonpixel_start,
                .args[3] = cp_nonpixel_size,
                .owner = ARM_SMCCC_OWNER_SIP,
        };
        struct qcom_scm_res res;

        ret = qcom_scm_call(__scm->dev, &desc, &res);

        return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_mem_protect_video_var);

static int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
                                 size_t mem_sz, phys_addr_t src, size_t src_sz,
                                 phys_addr_t dest, size_t dest_sz)
{
        int ret;
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_MP,
                .cmd = QCOM_SCM_MP_ASSIGN,
                .arginfo = QCOM_SCM_ARGS(7, QCOM_SCM_RO, QCOM_SCM_VAL,
                                         QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_RO,
                                         QCOM_SCM_VAL, QCOM_SCM_VAL),
                .args[0] = mem_region,
                .args[1] = mem_sz,
                .args[2] = src,
                .args[3] = src_sz,
                .args[4] = dest,
                .args[5] = dest_sz,
                .args[6] = 0,
                .owner = ARM_SMCCC_OWNER_SIP,
        };
        struct qcom_scm_res res;

        ret = qcom_scm_call(dev, &desc, &res);

        return ret ? : res.result[0];
}

/**
 * qcom_scm_assign_mem() - Make a secure call to reassign memory ownership
 * @mem_addr: mem region whose ownership need to be reassigned
 * @mem_sz:   size of the region.
 * @srcvm:    vmid for current set of owners, each set bit in
 *            flag indicate a unique owner
 * @newvm:    array having new owners and corresponding permission
 *            flags
 * @dest_cnt: number of owners in next set.
 *
 * Return negative errno on failure or 0 on success with @srcvm updated.
 */
int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
                        unsigned int *srcvm,
                        const struct qcom_scm_vmperm *newvm,
                        unsigned int dest_cnt)
{
        struct qcom_scm_current_perm_info *destvm;
        struct qcom_scm_mem_map_info *mem_to_map;
        phys_addr_t mem_to_map_phys;
        phys_addr_t dest_phys;
        dma_addr_t ptr_phys;
        size_t mem_to_map_sz;
        size_t dest_sz;
        size_t src_sz;
        size_t ptr_sz;
        int next_vm;
        __le32 *src;
        void *ptr;
        int ret, i, b;
        unsigned long srcvm_bits = *srcvm;

        src_sz = hweight_long(srcvm_bits) * sizeof(*src);
        mem_to_map_sz = sizeof(*mem_to_map);
        dest_sz = dest_cnt * sizeof(*destvm);
        ptr_sz = ALIGN(src_sz, SZ_64) + ALIGN(mem_to_map_sz, SZ_64) +
                        ALIGN(dest_sz, SZ_64);

        ptr = dma_alloc_coherent(__scm->dev, ptr_sz, &ptr_phys, GFP_KERNEL);
        if (!ptr)
                return -ENOMEM;

        /* Fill source vmid detail */
        src = ptr;
        i = 0;
        for_each_set_bit(b, &srcvm_bits, BITS_PER_LONG)
                src[i++] = cpu_to_le32(b);

        /* Fill details of mem buff to map */
        mem_to_map = ptr + ALIGN(src_sz, SZ_64);
        mem_to_map_phys = ptr_phys + ALIGN(src_sz, SZ_64);
        mem_to_map->mem_addr = cpu_to_le64(mem_addr);
        mem_to_map->mem_size = cpu_to_le64(mem_sz);

        next_vm = 0;
        /* Fill details of next vmid detail */
        destvm = ptr + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(src_sz, SZ_64);
        dest_phys = ptr_phys + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(src_sz, SZ_64);
        for (i = 0; i < dest_cnt; i++, destvm++, newvm++) {
                destvm->vmid = cpu_to_le32(newvm->vmid);
                destvm->perm = cpu_to_le32(newvm->perm);
                destvm->ctx = 0;
                destvm->ctx_size = 0;
                next_vm |= BIT(newvm->vmid);
        }

        ret = __qcom_scm_assign_mem(__scm->dev, mem_to_map_phys, mem_to_map_sz,
                                    ptr_phys, src_sz, dest_phys, dest_sz);
        dma_free_coherent(__scm->dev, ptr_sz, ptr, ptr_phys);
        if (ret) {
                dev_err(__scm->dev,
                        "Assign memory protection call failed %d\n", ret);
                return -EINVAL;
        }

        *srcvm = next_vm;
        return 0;
}
EXPORT_SYMBOL(qcom_scm_assign_mem);

/**
 * qcom_scm_ocmem_lock_available() - is OCMEM lock/unlock interface available
 */
bool qcom_scm_ocmem_lock_available(void)
{
        return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_OCMEM,
                                            QCOM_SCM_OCMEM_LOCK_CMD);
}
EXPORT_SYMBOL(qcom_scm_ocmem_lock_available);

/**
 * qcom_scm_ocmem_lock() - call OCMEM lock interface to assign an OCMEM
 * region to the specified initiator
 *
 * @id:     tz initiator id
 * @offset: OCMEM offset
 * @size:   OCMEM size
 * @mode:   access mode (WIDE/NARROW)
 */
int qcom_scm_ocmem_lock(enum qcom_scm_ocmem_client id, u32 offset, u32 size,
                        u32 mode)
{
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_OCMEM,
                .cmd = QCOM_SCM_OCMEM_LOCK_CMD,
                .args[0] = id,
                .args[1] = offset,
                .args[2] = size,
                .args[3] = mode,
                .arginfo = QCOM_SCM_ARGS(4),
        };

        return qcom_scm_call(__scm->dev, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_ocmem_lock);

/**
 * qcom_scm_ocmem_unlock() - call OCMEM unlock interface to release an OCMEM
 * region from the specified initiator
 *
 * @id:     tz initiator id
 * @offset: OCMEM offset
 * @size:   OCMEM size
 */
int qcom_scm_ocmem_unlock(enum qcom_scm_ocmem_client id, u32 offset, u32 size)
{
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_OCMEM,
                .cmd = QCOM_SCM_OCMEM_UNLOCK_CMD,
                .args[0] = id,
                .args[1] = offset,
                .args[2] = size,
                .arginfo = QCOM_SCM_ARGS(3),
        };

        return qcom_scm_call(__scm->dev, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_ocmem_unlock);

/**
 * qcom_scm_ice_available() - Is the ICE key programming interface available?
 *
 * Return: true iff the SCM calls wrapped by qcom_scm_ice_invalidate_key() and
 *         qcom_scm_ice_set_key() are available.
 */
bool qcom_scm_ice_available(void)
{
        return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_ES,
                                            QCOM_SCM_ES_INVALIDATE_ICE_KEY) &&
                __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_ES,
                                             QCOM_SCM_ES_CONFIG_SET_ICE_KEY);
}
EXPORT_SYMBOL(qcom_scm_ice_available);

/**
 * qcom_scm_ice_invalidate_key() - Invalidate an inline encryption key
 * @index: the keyslot to invalidate
 *
 * The UFSHCI and eMMC standards define a standard way to do this, but it
 * doesn't work on these SoCs; only this SCM call does.
 *
 * It is assumed that the SoC has only one ICE instance being used, as this SCM
 * call doesn't specify which ICE instance the keyslot belongs to.
 *
 * Return: 0 on success; -errno on failure.
 */
int qcom_scm_ice_invalidate_key(u32 index)
{
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_ES,
                .cmd = QCOM_SCM_ES_INVALIDATE_ICE_KEY,
                .arginfo = QCOM_SCM_ARGS(1),
                .args[0] = index,
                .owner = ARM_SMCCC_OWNER_SIP,
        };

        return qcom_scm_call(__scm->dev, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_ice_invalidate_key);

/**
 * qcom_scm_ice_set_key() - Set an inline encryption key
 * @index: the keyslot into which to set the key
 * @key: the key to program
 * @key_size: the size of the key in bytes
 * @cipher: the encryption algorithm the key is for
 * @data_unit_size: the encryption data unit size, i.e. the size of each
 *                  individual plaintext and ciphertext.  Given in 512-byte
 *                  units, e.g. 1 = 512 bytes, 8 = 4096 bytes, etc.
 *
 * Program a key into a keyslot of Qualcomm ICE (Inline Crypto Engine), where it
 * can then be used to encrypt/decrypt UFS or eMMC I/O requests inline.
 *
 * The UFSHCI and eMMC standards define a standard way to do this, but it
 * doesn't work on these SoCs; only this SCM call does.
 *
 * It is assumed that the SoC has only one ICE instance being used, as this SCM
 * call doesn't specify which ICE instance the keyslot belongs to.
 *
 * Return: 0 on success; -errno on failure.
 */
int qcom_scm_ice_set_key(u32 index, const u8 *key, u32 key_size,
                         enum qcom_scm_ice_cipher cipher, u32 data_unit_size)
{
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_ES,
                .cmd = QCOM_SCM_ES_CONFIG_SET_ICE_KEY,
                .arginfo = QCOM_SCM_ARGS(5, QCOM_SCM_VAL, QCOM_SCM_RW,
                                         QCOM_SCM_VAL, QCOM_SCM_VAL,
                                         QCOM_SCM_VAL),
                .args[0] = index,
                .args[2] = key_size,
                .args[3] = cipher,
                .args[4] = data_unit_size,
                .owner = ARM_SMCCC_OWNER_SIP,
        };
        void *keybuf;
        dma_addr_t key_phys;
        int ret;

        /*
         * 'key' may point to vmalloc()'ed memory, but we need to pass a
         * physical address that's been properly flushed.  The sanctioned way to
         * do this is by using the DMA API.  But as is best practice for crypto
         * keys, we also must wipe the key after use.  This makes kmemdup() +
         * dma_map_single() not clearly correct, since the DMA API can use
         * bounce buffers.  Instead, just use dma_alloc_coherent().  Programming
         * keys is normally rare and thus not performance-critical.
         */

        keybuf = dma_alloc_coherent(__scm->dev, key_size, &key_phys,
                                    GFP_KERNEL);
        if (!keybuf)
                return -ENOMEM;
        memcpy(keybuf, key, key_size);
        desc.args[1] = key_phys;

        ret = qcom_scm_call(__scm->dev, &desc, NULL);

        memzero_explicit(keybuf, key_size);

        dma_free_coherent(__scm->dev, key_size, keybuf, key_phys);
        return ret;
}
EXPORT_SYMBOL(qcom_scm_ice_set_key);

/**
 * qcom_scm_hdcp_available() - Check if secure environment supports HDCP.
 *
 * Return true if HDCP is supported, false if not.
 */
bool qcom_scm_hdcp_available(void)
{
        bool avail;
        int ret = qcom_scm_clk_enable();

        if (ret)
                return ret;

        avail = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP,
                                                QCOM_SCM_HDCP_INVOKE);

        qcom_scm_clk_disable();

        return avail;
}
EXPORT_SYMBOL(qcom_scm_hdcp_available);

/**
 * qcom_scm_hdcp_req() - Send HDCP request.
 * @req: HDCP request array
 * @req_cnt: HDCP request array count
 * @resp: response buffer passed to SCM
 *
 * Write HDCP register(s) through SCM.
 */
int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
{
        int ret;
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_HDCP,
                .cmd = QCOM_SCM_HDCP_INVOKE,
                .arginfo = QCOM_SCM_ARGS(10),
                .args = {
                        req[0].addr,
                        req[0].val,
                        req[1].addr,
                        req[1].val,
                        req[2].addr,
                        req[2].val,
                        req[3].addr,
                        req[3].val,
                        req[4].addr,
                        req[4].val
                },
                .owner = ARM_SMCCC_OWNER_SIP,
        };
        struct qcom_scm_res res;

        if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
                return -ERANGE;

        ret = qcom_scm_clk_enable();
        if (ret)
                return ret;

        ret = qcom_scm_call(__scm->dev, &desc, &res);
        *resp = res.result[0];

        qcom_scm_clk_disable();

        return ret;
}
EXPORT_SYMBOL(qcom_scm_hdcp_req);

int qcom_scm_iommu_set_pt_format(u32 sec_id, u32 ctx_num, u32 pt_fmt)
{
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_SMMU_PROGRAM,
                .cmd = QCOM_SCM_SMMU_PT_FORMAT,
                .arginfo = QCOM_SCM_ARGS(3),
                .args[0] = sec_id,
                .args[1] = ctx_num,
                .args[2] = pt_fmt, /* 0: LPAE AArch32 - 1: AArch64 */
                .owner = ARM_SMCCC_OWNER_SIP,
        };

        return qcom_scm_call(__scm->dev, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_iommu_set_pt_format);

int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
{
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_SMMU_PROGRAM,
                .cmd = QCOM_SCM_SMMU_CONFIG_ERRATA1,
                .arginfo = QCOM_SCM_ARGS(2),
                .args[0] = QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL,
                .args[1] = en,
                .owner = ARM_SMCCC_OWNER_SIP,
        };


        return qcom_scm_call_atomic(__scm->dev, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_qsmmu500_wait_safe_toggle);

bool qcom_scm_lmh_dcvsh_available(void)
{
        return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_LMH, QCOM_SCM_LMH_LIMIT_DCVSH);
}
EXPORT_SYMBOL(qcom_scm_lmh_dcvsh_available);

int qcom_scm_lmh_profile_change(u32 profile_id)
{
        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_LMH,
                .cmd = QCOM_SCM_LMH_LIMIT_PROFILE_CHANGE,
                .arginfo = QCOM_SCM_ARGS(1, QCOM_SCM_VAL),
                .args[0] = profile_id,
                .owner = ARM_SMCCC_OWNER_SIP,
        };

        return qcom_scm_call(__scm->dev, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_lmh_profile_change);

int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
                       u64 limit_node, u32 node_id, u64 version)
{
        dma_addr_t payload_phys;
        u32 *payload_buf;
        int ret, payload_size = 5 * sizeof(u32);

        struct qcom_scm_desc desc = {
                .svc = QCOM_SCM_SVC_LMH,
                .cmd = QCOM_SCM_LMH_LIMIT_DCVSH,
                .arginfo = QCOM_SCM_ARGS(5, QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_VAL,
                                        QCOM_SCM_VAL, QCOM_SCM_VAL),
                .args[1] = payload_size,
                .args[2] = limit_node,
                .args[3] = node_id,
                .args[4] = version,
                .owner = ARM_SMCCC_OWNER_SIP,
        };

        payload_buf = dma_alloc_coherent(__scm->dev, payload_size, &payload_phys, GFP_KERNEL);
        if (!payload_buf)
                return -ENOMEM;

        payload_buf[0] = payload_fn;
        payload_buf[1] = 0;
        payload_buf[2] = payload_reg;
        payload_buf[3] = 1;
        payload_buf[4] = payload_val;

        desc.args[0] = payload_phys;

        ret = qcom_scm_call(__scm->dev, &desc, NULL);

        dma_free_coherent(__scm->dev, payload_size, payload_buf, payload_phys);
        return ret;
}
EXPORT_SYMBOL(qcom_scm_lmh_dcvsh);

static int qcom_scm_find_dload_address(struct device *dev, u64 *addr)
{
        struct device_node *tcsr;
        struct device_node *np = dev->of_node;
        struct resource res;
        u32 offset;
        int ret;

        tcsr = of_parse_phandle(np, "qcom,dload-mode", 0);
        if (!tcsr)
                return 0;

        ret = of_address_to_resource(tcsr, 0, &res);
        of_node_put(tcsr);
        if (ret)
                return ret;

        ret = of_property_read_u32_index(np, "qcom,dload-mode", 1, &offset);
        if (ret < 0)
                return ret;

        *addr = res.start + offset;

        return 0;
}

/**
 * qcom_scm_is_available() - Checks if SCM is available
 */
bool qcom_scm_is_available(void)
{
        return !!__scm;
}
EXPORT_SYMBOL(qcom_scm_is_available);

static int qcom_scm_probe(struct platform_device *pdev)
{
        struct qcom_scm *scm;
        unsigned long clks;
        int ret;

        scm = devm_kzalloc(&pdev->dev, sizeof(*scm), GFP_KERNEL);
        if (!scm)
                return -ENOMEM;

        ret = qcom_scm_find_dload_address(&pdev->dev, &scm->dload_mode_addr);
        if (ret < 0)
                return ret;

        clks = (unsigned long)of_device_get_match_data(&pdev->dev);

        scm->core_clk = devm_clk_get(&pdev->dev, "core");
        if (IS_ERR(scm->core_clk)) {
                if (PTR_ERR(scm->core_clk) == -EPROBE_DEFER)
                        return PTR_ERR(scm->core_clk);

                if (clks & SCM_HAS_CORE_CLK) {
                        dev_err(&pdev->dev, "failed to acquire core clk\n");
                        return PTR_ERR(scm->core_clk);
                }

                scm->core_clk = NULL;
        }

        scm->iface_clk = devm_clk_get(&pdev->dev, "iface");
        if (IS_ERR(scm->iface_clk)) {
                if (PTR_ERR(scm->iface_clk) == -EPROBE_DEFER)
                        return PTR_ERR(scm->iface_clk);

                if (clks & SCM_HAS_IFACE_CLK) {
                        dev_err(&pdev->dev, "failed to acquire iface clk\n");
                        return PTR_ERR(scm->iface_clk);
                }

                scm->iface_clk = NULL;
        }

        scm->bus_clk = devm_clk_get(&pdev->dev, "bus");
        if (IS_ERR(scm->bus_clk)) {
                if (PTR_ERR(scm->bus_clk) == -EPROBE_DEFER)
                        return PTR_ERR(scm->bus_clk);

                if (clks & SCM_HAS_BUS_CLK) {
                        dev_err(&pdev->dev, "failed to acquire bus clk\n");
                        return PTR_ERR(scm->bus_clk);
                }

                scm->bus_clk = NULL;
        }

        scm->reset.ops = &qcom_scm_pas_reset_ops;
        scm->reset.nr_resets = 1;
        scm->reset.of_node = pdev->dev.of_node;
        ret = devm_reset_controller_register(&pdev->dev, &scm->reset);
        if (ret)
                return ret;

        /* vote for max clk rate for highest performance */
        ret = clk_set_rate(scm->core_clk, INT_MAX);
        if (ret)
                return ret;

        __scm = scm;
        __scm->dev = &pdev->dev;

        __get_convention();

        /*
         * If requested enable "download mode", from this point on warmboot
         * will cause the the boot stages to enter download mode, unless
         * disabled below by a clean shutdown/reboot.
         */
        if (download_mode)
                qcom_scm_set_download_mode(true);

        return 0;
}

static void qcom_scm_shutdown(struct platform_device *pdev)
{
        /* Clean shutdown, disable download mode to allow normal restart */
        if (download_mode)
                qcom_scm_set_download_mode(false);
}

static const struct of_device_id qcom_scm_dt_match[] = {
        { .compatible = "qcom,scm-apq8064",
          /* FIXME: This should have .data = (void *) SCM_HAS_CORE_CLK */
        },
        { .compatible = "qcom,scm-apq8084", .data = (void *)(SCM_HAS_CORE_CLK |
                                                             SCM_HAS_IFACE_CLK |
                                                             SCM_HAS_BUS_CLK)
        },
        { .compatible = "qcom,scm-ipq4019" },
        { .compatible = "qcom,scm-mdm9607", .data = (void *)(SCM_HAS_CORE_CLK |
                                                             SCM_HAS_IFACE_CLK |
                                                             SCM_HAS_BUS_CLK) },
        { .compatible = "qcom,scm-msm8660", .data = (void *) SCM_HAS_CORE_CLK },
        { .compatible = "qcom,scm-msm8960", .data = (void *) SCM_HAS_CORE_CLK },
        { .compatible = "qcom,scm-msm8916", .data = (void *)(SCM_HAS_CORE_CLK |
                                                             SCM_HAS_IFACE_CLK |
                                                             SCM_HAS_BUS_CLK)
        },
        { .compatible = "qcom,scm-msm8953", .data = (void *)(SCM_HAS_CORE_CLK |
                                                             SCM_HAS_IFACE_CLK |
                                                             SCM_HAS_BUS_CLK)
        },
        { .compatible = "qcom,scm-msm8974", .data = (void *)(SCM_HAS_CORE_CLK |
                                                             SCM_HAS_IFACE_CLK |
                                                             SCM_HAS_BUS_CLK)
        },
        { .compatible = "qcom,scm-msm8994" },
        { .compatible = "qcom,scm-msm8996" },
        { .compatible = "qcom,scm" },
        {}
};
MODULE_DEVICE_TABLE(of, qcom_scm_dt_match);

static struct platform_driver qcom_scm_driver = {
        .driver = {
                .name   = "qcom_scm",
                .of_match_table = qcom_scm_dt_match,
                .suppress_bind_attrs = true,
        },
        .probe = qcom_scm_probe,
        .shutdown = qcom_scm_shutdown,
};

static int __init qcom_scm_init(void)
{
        return platform_driver_register(&qcom_scm_driver);
}
subsys_initcall(qcom_scm_init);

MODULE_DESCRIPTION("Qualcomm Technologies, Inc. SCM driver");
MODULE_LICENSE("GPL v2");