linux/drivers/input/misc/keyspan_remote.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * keyspan_remote: USB driver for the Keyspan DMR
   4 *
   5 * Copyright (C) 2005 Zymeta Corporation - Michael Downey (downey@zymeta.com)
   6 *
   7 * This driver has been put together with the support of Innosys, Inc.
   8 * and Keyspan, Inc the manufacturers of the Keyspan USB DMR product.
   9 */
  10
  11#include <linux/kernel.h>
  12#include <linux/errno.h>
  13#include <linux/slab.h>
  14#include <linux/module.h>
  15#include <linux/usb/input.h>
  16
  17/* Parameters that can be passed to the driver. */
  18static int debug;
  19module_param(debug, int, 0444);
  20MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
  21
  22/* Vendor and product ids */
  23#define USB_KEYSPAN_VENDOR_ID           0x06CD
  24#define USB_KEYSPAN_PRODUCT_UIA11       0x0202
  25
  26/* Defines for converting the data from the remote. */
  27#define ZERO            0x18
  28#define ZERO_MASK       0x1F    /* 5 bits for a 0 */
  29#define ONE             0x3C
  30#define ONE_MASK        0x3F    /* 6 bits for a 1 */
  31#define SYNC            0x3F80
  32#define SYNC_MASK       0x3FFF  /* 14 bits for a SYNC sequence */
  33#define STOP            0x00
  34#define STOP_MASK       0x1F    /* 5 bits for the STOP sequence */
  35#define GAP             0xFF
  36
  37#define RECV_SIZE       8       /* The UIA-11 type have a 8 byte limit. */
  38
  39/*
  40 * Table that maps the 31 possible keycodes to input keys.
  41 * Currently there are 15 and 17 button models so RESERVED codes
  42 * are blank areas in the mapping.
  43 */
  44static const unsigned short keyspan_key_table[] = {
  45        KEY_RESERVED,           /* 0 is just a place holder. */
  46        KEY_RESERVED,
  47        KEY_STOP,
  48        KEY_PLAYCD,
  49        KEY_RESERVED,
  50        KEY_PREVIOUSSONG,
  51        KEY_REWIND,
  52        KEY_FORWARD,
  53        KEY_NEXTSONG,
  54        KEY_RESERVED,
  55        KEY_RESERVED,
  56        KEY_RESERVED,
  57        KEY_PAUSE,
  58        KEY_VOLUMEUP,
  59        KEY_RESERVED,
  60        KEY_RESERVED,
  61        KEY_RESERVED,
  62        KEY_VOLUMEDOWN,
  63        KEY_RESERVED,
  64        KEY_UP,
  65        KEY_RESERVED,
  66        KEY_MUTE,
  67        KEY_LEFT,
  68        KEY_ENTER,
  69        KEY_RIGHT,
  70        KEY_RESERVED,
  71        KEY_RESERVED,
  72        KEY_DOWN,
  73        KEY_RESERVED,
  74        KEY_KPASTERISK,
  75        KEY_RESERVED,
  76        KEY_MENU
  77};
  78
  79/* table of devices that work with this driver */
  80static const struct usb_device_id keyspan_table[] = {
  81        { USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) },
  82        { }                                     /* Terminating entry */
  83};
  84
  85/* Structure to store all the real stuff that a remote sends to us. */
  86struct keyspan_message {
  87        u16     system;
  88        u8      button;
  89        u8      toggle;
  90};
  91
  92/* Structure used for all the bit testing magic needed to be done. */
  93struct bit_tester {
  94        u32     tester;
  95        int     len;
  96        int     pos;
  97        int     bits_left;
  98        u8      buffer[32];
  99};
 100
 101/* Structure to hold all of our driver specific stuff */
 102struct usb_keyspan {
 103        char                            name[128];
 104        char                            phys[64];
 105        unsigned short                  keymap[ARRAY_SIZE(keyspan_key_table)];
 106        struct usb_device               *udev;
 107        struct input_dev                *input;
 108        struct usb_interface            *interface;
 109        struct usb_endpoint_descriptor  *in_endpoint;
 110        struct urb*                     irq_urb;
 111        int                             open;
 112        dma_addr_t                      in_dma;
 113        unsigned char                   *in_buffer;
 114
 115        /* variables used to parse messages from remote. */
 116        struct bit_tester               data;
 117        int                             stage;
 118        int                             toggle;
 119};
 120
 121static struct usb_driver keyspan_driver;
 122
 123/*
 124 * Debug routine that prints out what we've received from the remote.
 125 */
 126static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/
 127{
 128        char codes[4 * RECV_SIZE];
 129        int i;
 130
 131        for (i = 0; i < RECV_SIZE; i++)
 132                snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]);
 133
 134        dev_info(&dev->udev->dev, "%s\n", codes);
 135}
 136
 137/*
 138 * Routine that manages the bit_tester structure.  It makes sure that there are
 139 * at least bits_needed bits loaded into the tester.
 140 */
 141static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed)
 142{
 143        if (dev->data.bits_left >= bits_needed)
 144                return 0;
 145
 146        /*
 147         * Somehow we've missed the last message. The message will be repeated
 148         * though so it's not too big a deal
 149         */
 150        if (dev->data.pos >= dev->data.len) {
 151                dev_dbg(&dev->interface->dev,
 152                        "%s - Error ran out of data. pos: %d, len: %d\n",
 153                        __func__, dev->data.pos, dev->data.len);
 154                return -1;
 155        }
 156
 157        /* Load as much as we can into the tester. */
 158        while ((dev->data.bits_left + 7 < (sizeof(dev->data.tester) * 8)) &&
 159               (dev->data.pos < dev->data.len)) {
 160                dev->data.tester += (dev->data.buffer[dev->data.pos++] << dev->data.bits_left);
 161                dev->data.bits_left += 8;
 162        }
 163
 164        return 0;
 165}
 166
 167static void keyspan_report_button(struct usb_keyspan *remote, int button, int press)
 168{
 169        struct input_dev *input = remote->input;
 170
 171        input_event(input, EV_MSC, MSC_SCAN, button);
 172        input_report_key(input, remote->keymap[button], press);
 173        input_sync(input);
 174}
 175
 176/*
 177 * Routine that handles all the logic needed to parse out the message from the remote.
 178 */
 179static void keyspan_check_data(struct usb_keyspan *remote)
 180{
 181        int i;
 182        int found = 0;
 183        struct keyspan_message message;
 184
 185        switch(remote->stage) {
 186        case 0:
 187                /*
 188                 * In stage 0 we want to find the start of a message.  The remote sends a 0xFF as filler.
 189                 * So the first byte that isn't a FF should be the start of a new message.
 190                 */
 191                for (i = 0; i < RECV_SIZE && remote->in_buffer[i] == GAP; ++i);
 192
 193                if (i < RECV_SIZE) {
 194                        memcpy(remote->data.buffer, remote->in_buffer, RECV_SIZE);
 195                        remote->data.len = RECV_SIZE;
 196                        remote->data.pos = 0;
 197                        remote->data.tester = 0;
 198                        remote->data.bits_left = 0;
 199                        remote->stage = 1;
 200                }
 201                break;
 202
 203        case 1:
 204                /*
 205                 * Stage 1 we should have 16 bytes and should be able to detect a
 206                 * SYNC.  The SYNC is 14 bits, 7 0's and then 7 1's.
 207                 */
 208                memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
 209                remote->data.len += RECV_SIZE;
 210
 211                found = 0;
 212                while ((remote->data.bits_left >= 14 || remote->data.pos < remote->data.len) && !found) {
 213                        for (i = 0; i < 8; ++i) {
 214                                if (keyspan_load_tester(remote, 14) != 0) {
 215                                        remote->stage = 0;
 216                                        return;
 217                                }
 218
 219                                if ((remote->data.tester & SYNC_MASK) == SYNC) {
 220                                        remote->data.tester = remote->data.tester >> 14;
 221                                        remote->data.bits_left -= 14;
 222                                        found = 1;
 223                                        break;
 224                                } else {
 225                                        remote->data.tester = remote->data.tester >> 1;
 226                                        --remote->data.bits_left;
 227                                }
 228                        }
 229                }
 230
 231                if (!found) {
 232                        remote->stage = 0;
 233                        remote->data.len = 0;
 234                } else {
 235                        remote->stage = 2;
 236                }
 237                break;
 238
 239        case 2:
 240                /*
 241                 * Stage 2 we should have 24 bytes which will be enough for a full
 242                 * message.  We need to parse out the system code, button code,
 243                 * toggle code, and stop.
 244                 */
 245                memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
 246                remote->data.len += RECV_SIZE;
 247
 248                message.system = 0;
 249                for (i = 0; i < 9; i++) {
 250                        keyspan_load_tester(remote, 6);
 251
 252                        if ((remote->data.tester & ZERO_MASK) == ZERO) {
 253                                message.system = message.system << 1;
 254                                remote->data.tester = remote->data.tester >> 5;
 255                                remote->data.bits_left -= 5;
 256                        } else if ((remote->data.tester & ONE_MASK) == ONE) {
 257                                message.system = (message.system << 1) + 1;
 258                                remote->data.tester = remote->data.tester >> 6;
 259                                remote->data.bits_left -= 6;
 260                        } else {
 261                                dev_err(&remote->interface->dev,
 262                                        "%s - Unknown sequence found in system data.\n",
 263                                        __func__);
 264                                remote->stage = 0;
 265                                return;
 266                        }
 267                }
 268
 269                message.button = 0;
 270                for (i = 0; i < 5; i++) {
 271                        keyspan_load_tester(remote, 6);
 272
 273                        if ((remote->data.tester & ZERO_MASK) == ZERO) {
 274                                message.button = message.button << 1;
 275                                remote->data.tester = remote->data.tester >> 5;
 276                                remote->data.bits_left -= 5;
 277                        } else if ((remote->data.tester & ONE_MASK) == ONE) {
 278                                message.button = (message.button << 1) + 1;
 279                                remote->data.tester = remote->data.tester >> 6;
 280                                remote->data.bits_left -= 6;
 281                        } else {
 282                                dev_err(&remote->interface->dev,
 283                                        "%s - Unknown sequence found in button data.\n",
 284                                        __func__);
 285                                remote->stage = 0;
 286                                return;
 287                        }
 288                }
 289
 290                keyspan_load_tester(remote, 6);
 291                if ((remote->data.tester & ZERO_MASK) == ZERO) {
 292                        message.toggle = 0;
 293                        remote->data.tester = remote->data.tester >> 5;
 294                        remote->data.bits_left -= 5;
 295                } else if ((remote->data.tester & ONE_MASK) == ONE) {
 296                        message.toggle = 1;
 297                        remote->data.tester = remote->data.tester >> 6;
 298                        remote->data.bits_left -= 6;
 299                } else {
 300                        dev_err(&remote->interface->dev,
 301                                "%s - Error in message, invalid toggle.\n",
 302                                __func__);
 303                        remote->stage = 0;
 304                        return;
 305                }
 306
 307                keyspan_load_tester(remote, 5);
 308                if ((remote->data.tester & STOP_MASK) == STOP) {
 309                        remote->data.tester = remote->data.tester >> 5;
 310                        remote->data.bits_left -= 5;
 311                } else {
 312                        dev_err(&remote->interface->dev,
 313                                "Bad message received, no stop bit found.\n");
 314                }
 315
 316                dev_dbg(&remote->interface->dev,
 317                        "%s found valid message: system: %d, button: %d, toggle: %d\n",
 318                        __func__, message.system, message.button, message.toggle);
 319
 320                if (message.toggle != remote->toggle) {
 321                        keyspan_report_button(remote, message.button, 1);
 322                        keyspan_report_button(remote, message.button, 0);
 323                        remote->toggle = message.toggle;
 324                }
 325
 326                remote->stage = 0;
 327                break;
 328        }
 329}
 330
 331/*
 332 * Routine for sending all the initialization messages to the remote.
 333 */
 334static int keyspan_setup(struct usb_device* dev)
 335{
 336        int retval = 0;
 337
 338        retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 339                                 0x11, 0x40, 0x5601, 0x0, NULL, 0,
 340                                 USB_CTRL_SET_TIMEOUT);
 341        if (retval) {
 342                dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n",
 343                        __func__, retval);
 344                return(retval);
 345        }
 346
 347        retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 348                                 0x44, 0x40, 0x0, 0x0, NULL, 0,
 349                                 USB_CTRL_SET_TIMEOUT);
 350        if (retval) {
 351                dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n",
 352                        __func__, retval);
 353                return(retval);
 354        }
 355
 356        retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 357                                 0x22, 0x40, 0x0, 0x0, NULL, 0,
 358                                 USB_CTRL_SET_TIMEOUT);
 359        if (retval) {
 360                dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n",
 361                        __func__, retval);
 362                return(retval);
 363        }
 364
 365        dev_dbg(&dev->dev, "%s - Setup complete.\n", __func__);
 366        return(retval);
 367}
 368
 369/*
 370 * Routine used to handle a new message that has come in.
 371 */
 372static void keyspan_irq_recv(struct urb *urb)
 373{
 374        struct usb_keyspan *dev = urb->context;
 375        int retval;
 376
 377        /* Check our status in case we need to bail out early. */
 378        switch (urb->status) {
 379        case 0:
 380                break;
 381
 382        /* Device went away so don't keep trying to read from it. */
 383        case -ECONNRESET:
 384        case -ENOENT:
 385        case -ESHUTDOWN:
 386                return;
 387
 388        default:
 389                goto resubmit;
 390        }
 391
 392        if (debug)
 393                keyspan_print(dev);
 394
 395        keyspan_check_data(dev);
 396
 397resubmit:
 398        retval = usb_submit_urb(urb, GFP_ATOMIC);
 399        if (retval)
 400                dev_err(&dev->interface->dev,
 401                        "%s - usb_submit_urb failed with result: %d\n",
 402                        __func__, retval);
 403}
 404
 405static int keyspan_open(struct input_dev *dev)
 406{
 407        struct usb_keyspan *remote = input_get_drvdata(dev);
 408
 409        remote->irq_urb->dev = remote->udev;
 410        if (usb_submit_urb(remote->irq_urb, GFP_KERNEL))
 411                return -EIO;
 412
 413        return 0;
 414}
 415
 416static void keyspan_close(struct input_dev *dev)
 417{
 418        struct usb_keyspan *remote = input_get_drvdata(dev);
 419
 420        usb_kill_urb(remote->irq_urb);
 421}
 422
 423static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface)
 424{
 425
 426        struct usb_endpoint_descriptor *endpoint;
 427        int i;
 428
 429        for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
 430                endpoint = &iface->endpoint[i].desc;
 431
 432                if (usb_endpoint_is_int_in(endpoint)) {
 433                        /* we found our interrupt in endpoint */
 434                        return endpoint;
 435                }
 436        }
 437
 438        return NULL;
 439}
 440
 441/*
 442 * Routine that sets up the driver to handle a specific USB device detected on the bus.
 443 */
 444static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id)
 445{
 446        struct usb_device *udev = interface_to_usbdev(interface);
 447        struct usb_endpoint_descriptor *endpoint;
 448        struct usb_keyspan *remote;
 449        struct input_dev *input_dev;
 450        int i, error;
 451
 452        endpoint = keyspan_get_in_endpoint(interface->cur_altsetting);
 453        if (!endpoint)
 454                return -ENODEV;
 455
 456        remote = kzalloc(sizeof(*remote), GFP_KERNEL);
 457        input_dev = input_allocate_device();
 458        if (!remote || !input_dev) {
 459                error = -ENOMEM;
 460                goto fail1;
 461        }
 462
 463        remote->udev = udev;
 464        remote->input = input_dev;
 465        remote->interface = interface;
 466        remote->in_endpoint = endpoint;
 467        remote->toggle = -1;    /* Set to -1 so we will always not match the toggle from the first remote message. */
 468
 469        remote->in_buffer = usb_alloc_coherent(udev, RECV_SIZE, GFP_KERNEL, &remote->in_dma);
 470        if (!remote->in_buffer) {
 471                error = -ENOMEM;
 472                goto fail1;
 473        }
 474
 475        remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
 476        if (!remote->irq_urb) {
 477                error = -ENOMEM;
 478                goto fail2;
 479        }
 480
 481        error = keyspan_setup(udev);
 482        if (error) {
 483                error = -ENODEV;
 484                goto fail3;
 485        }
 486
 487        if (udev->manufacturer)
 488                strlcpy(remote->name, udev->manufacturer, sizeof(remote->name));
 489
 490        if (udev->product) {
 491                if (udev->manufacturer)
 492                        strlcat(remote->name, " ", sizeof(remote->name));
 493                strlcat(remote->name, udev->product, sizeof(remote->name));
 494        }
 495
 496        if (!strlen(remote->name))
 497                snprintf(remote->name, sizeof(remote->name),
 498                         "USB Keyspan Remote %04x:%04x",
 499                         le16_to_cpu(udev->descriptor.idVendor),
 500                         le16_to_cpu(udev->descriptor.idProduct));
 501
 502        usb_make_path(udev, remote->phys, sizeof(remote->phys));
 503        strlcat(remote->phys, "/input0", sizeof(remote->phys));
 504        memcpy(remote->keymap, keyspan_key_table, sizeof(remote->keymap));
 505
 506        input_dev->name = remote->name;
 507        input_dev->phys = remote->phys;
 508        usb_to_input_id(udev, &input_dev->id);
 509        input_dev->dev.parent = &interface->dev;
 510        input_dev->keycode = remote->keymap;
 511        input_dev->keycodesize = sizeof(unsigned short);
 512        input_dev->keycodemax = ARRAY_SIZE(remote->keymap);
 513
 514        input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 515        __set_bit(EV_KEY, input_dev->evbit);
 516        for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++)
 517                __set_bit(keyspan_key_table[i], input_dev->keybit);
 518        __clear_bit(KEY_RESERVED, input_dev->keybit);
 519
 520        input_set_drvdata(input_dev, remote);
 521
 522        input_dev->open = keyspan_open;
 523        input_dev->close = keyspan_close;
 524
 525        /*
 526         * Initialize the URB to access the device.
 527         * The urb gets sent to the device in keyspan_open()
 528         */
 529        usb_fill_int_urb(remote->irq_urb,
 530                         remote->udev,
 531                         usb_rcvintpipe(remote->udev, endpoint->bEndpointAddress),
 532                         remote->in_buffer, RECV_SIZE, keyspan_irq_recv, remote,
 533                         endpoint->bInterval);
 534        remote->irq_urb->transfer_dma = remote->in_dma;
 535        remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 536
 537        /* we can register the device now, as it is ready */
 538        error = input_register_device(remote->input);
 539        if (error)
 540                goto fail3;
 541
 542        /* save our data pointer in this interface device */
 543        usb_set_intfdata(interface, remote);
 544
 545        return 0;
 546
 547 fail3: usb_free_urb(remote->irq_urb);
 548 fail2: usb_free_coherent(udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
 549 fail1: kfree(remote);
 550        input_free_device(input_dev);
 551
 552        return error;
 553}
 554
 555/*
 556 * Routine called when a device is disconnected from the USB.
 557 */
 558static void keyspan_disconnect(struct usb_interface *interface)
 559{
 560        struct usb_keyspan *remote;
 561
 562        remote = usb_get_intfdata(interface);
 563        usb_set_intfdata(interface, NULL);
 564
 565        if (remote) {   /* We have a valid driver structure so clean up everything we allocated. */
 566                input_unregister_device(remote->input);
 567                usb_kill_urb(remote->irq_urb);
 568                usb_free_urb(remote->irq_urb);
 569                usb_free_coherent(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
 570                kfree(remote);
 571        }
 572}
 573
 574/*
 575 * Standard driver set up sections
 576 */
 577static struct usb_driver keyspan_driver =
 578{
 579        .name =         "keyspan_remote",
 580        .probe =        keyspan_probe,
 581        .disconnect =   keyspan_disconnect,
 582        .id_table =     keyspan_table
 583};
 584
 585module_usb_driver(keyspan_driver);
 586
 587MODULE_DEVICE_TABLE(usb, keyspan_table);
 588MODULE_AUTHOR("Michael Downey <downey@zymeta.com>");
 589MODULE_DESCRIPTION("Driver for the USB Keyspan remote control.");
 590MODULE_LICENSE("GPL");
 591