linux/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2010 Broadcom Corporation
   3 * Copyright (c) 2013 Hauke Mehrtens <hauke@hauke-m.de>
   4 *
   5 * Permission to use, copy, modify, and/or distribute this software for any
   6 * purpose with or without fee is hereby granted, provided that the above
   7 * copyright notice and this permission notice appear in all copies.
   8 *
   9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  12 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  14 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  15 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  16 */
  17
  18#define __UNDEF_NO_VERSION__
  19#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  20
  21#include <linux/etherdevice.h>
  22#include <linux/sched.h>
  23#include <linux/firmware.h>
  24#include <linux/interrupt.h>
  25#include <linux/module.h>
  26#include <linux/bcma/bcma.h>
  27#include <net/mac80211.h>
  28#include <defs.h>
  29#include "phy/phy_int.h"
  30#include "d11.h"
  31#include "channel.h"
  32#include "scb.h"
  33#include "pub.h"
  34#include "ucode_loader.h"
  35#include "mac80211_if.h"
  36#include "main.h"
  37#include "debug.h"
  38#include "led.h"
  39
  40#define N_TX_QUEUES     4 /* #tx queues on mac80211<->driver interface */
  41#define BRCMS_FLUSH_TIMEOUT     500 /* msec */
  42
  43/* Flags we support */
  44#define MAC_FILTERS (FIF_ALLMULTI | \
  45        FIF_FCSFAIL | \
  46        FIF_CONTROL | \
  47        FIF_OTHER_BSS | \
  48        FIF_BCN_PRBRESP_PROMISC | \
  49        FIF_PSPOLL)
  50
  51#define CHAN2GHZ(channel, freqency, chflags)  { \
  52        .band = NL80211_BAND_2GHZ, \
  53        .center_freq = (freqency), \
  54        .hw_value = (channel), \
  55        .flags = chflags, \
  56        .max_antenna_gain = 0, \
  57        .max_power = 19, \
  58}
  59
  60#define CHAN5GHZ(channel, chflags)  { \
  61        .band = NL80211_BAND_5GHZ, \
  62        .center_freq = 5000 + 5*(channel), \
  63        .hw_value = (channel), \
  64        .flags = chflags, \
  65        .max_antenna_gain = 0, \
  66        .max_power = 21, \
  67}
  68
  69#define RATE(rate100m, _flags) { \
  70        .bitrate = (rate100m), \
  71        .flags = (_flags), \
  72        .hw_value = (rate100m / 5), \
  73}
  74
  75struct firmware_hdr {
  76        __le32 offset;
  77        __le32 len;
  78        __le32 idx;
  79};
  80
  81static const char * const brcms_firmwares[MAX_FW_IMAGES] = {
  82        "brcm/bcm43xx",
  83        NULL
  84};
  85
  86static int n_adapters_found;
  87
  88MODULE_AUTHOR("Broadcom Corporation");
  89MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver.");
  90MODULE_LICENSE("Dual BSD/GPL");
  91/* This needs to be adjusted when brcms_firmwares changes */
  92MODULE_FIRMWARE("brcm/bcm43xx-0.fw");
  93MODULE_FIRMWARE("brcm/bcm43xx_hdr-0.fw");
  94
  95/* recognized BCMA Core IDs */
  96static struct bcma_device_id brcms_coreid_table[] = {
  97        BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 17, BCMA_ANY_CLASS),
  98        BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 23, BCMA_ANY_CLASS),
  99        BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 24, BCMA_ANY_CLASS),
 100        {},
 101};
 102MODULE_DEVICE_TABLE(bcma, brcms_coreid_table);
 103
 104#if defined(CONFIG_BRCMDBG)
 105/*
 106 * Module parameter for setting the debug message level. Available
 107 * flags are specified by the BRCM_DL_* macros in
 108 * drivers/net/wireless/brcm80211/include/defs.h.
 109 */
 110module_param_named(debug, brcm_msg_level, uint, 0644);
 111#endif
 112
 113static struct ieee80211_channel brcms_2ghz_chantable[] = {
 114        CHAN2GHZ(1, 2412, IEEE80211_CHAN_NO_HT40MINUS),
 115        CHAN2GHZ(2, 2417, IEEE80211_CHAN_NO_HT40MINUS),
 116        CHAN2GHZ(3, 2422, IEEE80211_CHAN_NO_HT40MINUS),
 117        CHAN2GHZ(4, 2427, IEEE80211_CHAN_NO_HT40MINUS),
 118        CHAN2GHZ(5, 2432, 0),
 119        CHAN2GHZ(6, 2437, 0),
 120        CHAN2GHZ(7, 2442, 0),
 121        CHAN2GHZ(8, 2447, IEEE80211_CHAN_NO_HT40PLUS),
 122        CHAN2GHZ(9, 2452, IEEE80211_CHAN_NO_HT40PLUS),
 123        CHAN2GHZ(10, 2457, IEEE80211_CHAN_NO_HT40PLUS),
 124        CHAN2GHZ(11, 2462, IEEE80211_CHAN_NO_HT40PLUS),
 125        CHAN2GHZ(12, 2467,
 126                 IEEE80211_CHAN_NO_IR |
 127                 IEEE80211_CHAN_NO_HT40PLUS),
 128        CHAN2GHZ(13, 2472,
 129                 IEEE80211_CHAN_NO_IR |
 130                 IEEE80211_CHAN_NO_HT40PLUS),
 131        CHAN2GHZ(14, 2484,
 132                 IEEE80211_CHAN_NO_IR |
 133                 IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS |
 134                 IEEE80211_CHAN_NO_OFDM)
 135};
 136
 137static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = {
 138        /* UNII-1 */
 139        CHAN5GHZ(36, IEEE80211_CHAN_NO_HT40MINUS),
 140        CHAN5GHZ(40, IEEE80211_CHAN_NO_HT40PLUS),
 141        CHAN5GHZ(44, IEEE80211_CHAN_NO_HT40MINUS),
 142        CHAN5GHZ(48, IEEE80211_CHAN_NO_HT40PLUS),
 143        /* UNII-2 */
 144        CHAN5GHZ(52,
 145                 IEEE80211_CHAN_RADAR |
 146                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
 147        CHAN5GHZ(56,
 148                 IEEE80211_CHAN_RADAR |
 149                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
 150        CHAN5GHZ(60,
 151                 IEEE80211_CHAN_RADAR |
 152                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
 153        CHAN5GHZ(64,
 154                 IEEE80211_CHAN_RADAR |
 155                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
 156        /* MID */
 157        CHAN5GHZ(100,
 158                 IEEE80211_CHAN_RADAR |
 159                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
 160        CHAN5GHZ(104,
 161                 IEEE80211_CHAN_RADAR |
 162                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
 163        CHAN5GHZ(108,
 164                 IEEE80211_CHAN_RADAR |
 165                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
 166        CHAN5GHZ(112,
 167                 IEEE80211_CHAN_RADAR |
 168                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
 169        CHAN5GHZ(116,
 170                 IEEE80211_CHAN_RADAR |
 171                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
 172        CHAN5GHZ(120,
 173                 IEEE80211_CHAN_RADAR |
 174                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
 175        CHAN5GHZ(124,
 176                 IEEE80211_CHAN_RADAR |
 177                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
 178        CHAN5GHZ(128,
 179                 IEEE80211_CHAN_RADAR |
 180                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
 181        CHAN5GHZ(132,
 182                 IEEE80211_CHAN_RADAR |
 183                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
 184        CHAN5GHZ(136,
 185                 IEEE80211_CHAN_RADAR |
 186                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
 187        CHAN5GHZ(140,
 188                 IEEE80211_CHAN_RADAR |
 189                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS |
 190                 IEEE80211_CHAN_NO_HT40MINUS),
 191        /* UNII-3 */
 192        CHAN5GHZ(149, IEEE80211_CHAN_NO_HT40MINUS),
 193        CHAN5GHZ(153, IEEE80211_CHAN_NO_HT40PLUS),
 194        CHAN5GHZ(157, IEEE80211_CHAN_NO_HT40MINUS),
 195        CHAN5GHZ(161, IEEE80211_CHAN_NO_HT40PLUS),
 196        CHAN5GHZ(165, IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
 197};
 198
 199/*
 200 * The rate table is used for both 2.4G and 5G rates. The
 201 * latter being a subset as it does not support CCK rates.
 202 */
 203static struct ieee80211_rate legacy_ratetable[] = {
 204        RATE(10, 0),
 205        RATE(20, IEEE80211_RATE_SHORT_PREAMBLE),
 206        RATE(55, IEEE80211_RATE_SHORT_PREAMBLE),
 207        RATE(110, IEEE80211_RATE_SHORT_PREAMBLE),
 208        RATE(60, 0),
 209        RATE(90, 0),
 210        RATE(120, 0),
 211        RATE(180, 0),
 212        RATE(240, 0),
 213        RATE(360, 0),
 214        RATE(480, 0),
 215        RATE(540, 0),
 216};
 217
 218static const struct ieee80211_supported_band brcms_band_2GHz_nphy_template = {
 219        .band = NL80211_BAND_2GHZ,
 220        .channels = brcms_2ghz_chantable,
 221        .n_channels = ARRAY_SIZE(brcms_2ghz_chantable),
 222        .bitrates = legacy_ratetable,
 223        .n_bitrates = ARRAY_SIZE(legacy_ratetable),
 224        .ht_cap = {
 225                   /* from include/linux/ieee80211.h */
 226                   .cap = IEEE80211_HT_CAP_GRN_FLD |
 227                          IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40,
 228                   .ht_supported = true,
 229                   .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
 230                   .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
 231                   .mcs = {
 232                           /* placeholders for now */
 233                           .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
 234                           .rx_highest = cpu_to_le16(500),
 235                           .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
 236                   }
 237};
 238
 239static const struct ieee80211_supported_band brcms_band_5GHz_nphy_template = {
 240        .band = NL80211_BAND_5GHZ,
 241        .channels = brcms_5ghz_nphy_chantable,
 242        .n_channels = ARRAY_SIZE(brcms_5ghz_nphy_chantable),
 243        .bitrates = legacy_ratetable + BRCMS_LEGACY_5G_RATE_OFFSET,
 244        .n_bitrates = ARRAY_SIZE(legacy_ratetable) -
 245                        BRCMS_LEGACY_5G_RATE_OFFSET,
 246        .ht_cap = {
 247                   .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 |
 248                          IEEE80211_HT_CAP_SGI_40,
 249                   .ht_supported = true,
 250                   .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
 251                   .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
 252                   .mcs = {
 253                           /* placeholders for now */
 254                           .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
 255                           .rx_highest = cpu_to_le16(500),
 256                           .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
 257                   }
 258};
 259
 260/* flags the given rate in rateset as requested */
 261static void brcms_set_basic_rate(struct brcm_rateset *rs, u16 rate, bool is_br)
 262{
 263        u32 i;
 264
 265        for (i = 0; i < rs->count; i++) {
 266                if (rate != (rs->rates[i] & 0x7f))
 267                        continue;
 268
 269                if (is_br)
 270                        rs->rates[i] |= BRCMS_RATE_FLAG;
 271                else
 272                        rs->rates[i] &= BRCMS_RATE_MASK;
 273                return;
 274        }
 275}
 276
 277/*
 278 * This function frees the WL per-device resources.
 279 *
 280 * This function frees resources owned by the WL device pointed to
 281 * by the wl parameter.
 282 *
 283 * precondition: can both be called locked and unlocked
 284 */
 285static void brcms_free(struct brcms_info *wl)
 286{
 287        struct brcms_timer *t, *next;
 288
 289        /* free ucode data */
 290        if (wl->fw.fw_cnt)
 291                brcms_ucode_data_free(&wl->ucode);
 292        if (wl->irq)
 293                free_irq(wl->irq, wl);
 294
 295        /* kill dpc */
 296        tasklet_kill(&wl->tasklet);
 297
 298        if (wl->pub) {
 299                brcms_debugfs_detach(wl->pub);
 300                brcms_c_module_unregister(wl->pub, "linux", wl);
 301        }
 302
 303        /* free common resources */
 304        if (wl->wlc) {
 305                brcms_c_detach(wl->wlc);
 306                wl->wlc = NULL;
 307                wl->pub = NULL;
 308        }
 309
 310        /* virtual interface deletion is deferred so we cannot spinwait */
 311
 312        /* wait for all pending callbacks to complete */
 313        while (atomic_read(&wl->callbacks) > 0)
 314                schedule();
 315
 316        /* free timers */
 317        for (t = wl->timers; t; t = next) {
 318                next = t->next;
 319#ifdef DEBUG
 320                kfree(t->name);
 321#endif
 322                kfree(t);
 323        }
 324}
 325
 326/*
 327* called from both kernel as from this kernel module (error flow on attach)
 328* precondition: perimeter lock is not acquired.
 329*/
 330static void brcms_remove(struct bcma_device *pdev)
 331{
 332        struct ieee80211_hw *hw = bcma_get_drvdata(pdev);
 333        struct brcms_info *wl = hw->priv;
 334
 335        if (wl->wlc) {
 336                brcms_led_unregister(wl);
 337                wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, false);
 338                wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
 339                ieee80211_unregister_hw(hw);
 340        }
 341
 342        brcms_free(wl);
 343
 344        bcma_set_drvdata(pdev, NULL);
 345        ieee80211_free_hw(hw);
 346}
 347
 348/*
 349 * Precondition: Since this function is called in brcms_pci_probe() context,
 350 * no locking is required.
 351 */
 352static void brcms_release_fw(struct brcms_info *wl)
 353{
 354        int i;
 355        for (i = 0; i < MAX_FW_IMAGES; i++) {
 356                release_firmware(wl->fw.fw_bin[i]);
 357                release_firmware(wl->fw.fw_hdr[i]);
 358        }
 359}
 360
 361/*
 362 * Precondition: Since this function is called in brcms_pci_probe() context,
 363 * no locking is required.
 364 */
 365static int brcms_request_fw(struct brcms_info *wl, struct bcma_device *pdev)
 366{
 367        int status;
 368        struct device *device = &pdev->dev;
 369        char fw_name[100];
 370        int i;
 371
 372        memset(&wl->fw, 0, sizeof(struct brcms_firmware));
 373        for (i = 0; i < MAX_FW_IMAGES; i++) {
 374                if (brcms_firmwares[i] == NULL)
 375                        break;
 376                sprintf(fw_name, "%s-%d.fw", brcms_firmwares[i],
 377                        UCODE_LOADER_API_VER);
 378                status = request_firmware(&wl->fw.fw_bin[i], fw_name, device);
 379                if (status) {
 380                        wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
 381                                  KBUILD_MODNAME, fw_name);
 382                        return status;
 383                }
 384                sprintf(fw_name, "%s_hdr-%d.fw", brcms_firmwares[i],
 385                        UCODE_LOADER_API_VER);
 386                status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device);
 387                if (status) {
 388                        wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
 389                                  KBUILD_MODNAME, fw_name);
 390                        return status;
 391                }
 392                wl->fw.hdr_num_entries[i] =
 393                    wl->fw.fw_hdr[i]->size / (sizeof(struct firmware_hdr));
 394        }
 395        wl->fw.fw_cnt = i;
 396        status = brcms_ucode_data_init(wl, &wl->ucode);
 397        brcms_release_fw(wl);
 398        return status;
 399}
 400
 401static void brcms_ops_tx(struct ieee80211_hw *hw,
 402                         struct ieee80211_tx_control *control,
 403                         struct sk_buff *skb)
 404{
 405        struct brcms_info *wl = hw->priv;
 406        struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 407
 408        spin_lock_bh(&wl->lock);
 409        if (!wl->pub->up) {
 410                brcms_err(wl->wlc->hw->d11core, "ops->tx called while down\n");
 411                kfree_skb(skb);
 412                goto done;
 413        }
 414        if (brcms_c_sendpkt_mac80211(wl->wlc, skb, hw))
 415                tx_info->rate_driver_data[0] = control->sta;
 416 done:
 417        spin_unlock_bh(&wl->lock);
 418}
 419
 420static int brcms_ops_start(struct ieee80211_hw *hw)
 421{
 422        struct brcms_info *wl = hw->priv;
 423        bool blocked;
 424        int err;
 425
 426        if (!wl->ucode.bcm43xx_bomminor) {
 427                err = brcms_request_fw(wl, wl->wlc->hw->d11core);
 428                if (err)
 429                        return -ENOENT;
 430        }
 431
 432        ieee80211_wake_queues(hw);
 433        spin_lock_bh(&wl->lock);
 434        blocked = brcms_rfkill_set_hw_state(wl);
 435        spin_unlock_bh(&wl->lock);
 436        if (!blocked)
 437                wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
 438
 439        spin_lock_bh(&wl->lock);
 440        /* avoid acknowledging frames before a non-monitor device is added */
 441        wl->mute_tx = true;
 442
 443        if (!wl->pub->up)
 444                if (!blocked)
 445                        err = brcms_up(wl);
 446                else
 447                        err = -ERFKILL;
 448        else
 449                err = -ENODEV;
 450        spin_unlock_bh(&wl->lock);
 451
 452        if (err != 0)
 453                brcms_err(wl->wlc->hw->d11core, "%s: brcms_up() returned %d\n",
 454                          __func__, err);
 455
 456        bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, true);
 457        return err;
 458}
 459
 460static void brcms_ops_stop(struct ieee80211_hw *hw)
 461{
 462        struct brcms_info *wl = hw->priv;
 463        int status;
 464
 465        ieee80211_stop_queues(hw);
 466
 467        if (wl->wlc == NULL)
 468                return;
 469
 470        spin_lock_bh(&wl->lock);
 471        status = brcms_c_chipmatch(wl->wlc->hw->d11core);
 472        spin_unlock_bh(&wl->lock);
 473        if (!status) {
 474                brcms_err(wl->wlc->hw->d11core,
 475                          "wl: brcms_ops_stop: chipmatch failed\n");
 476                return;
 477        }
 478
 479        bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, false);
 480
 481        /* put driver in down state */
 482        spin_lock_bh(&wl->lock);
 483        brcms_down(wl);
 484        spin_unlock_bh(&wl->lock);
 485}
 486
 487static int
 488brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 489{
 490        struct brcms_info *wl = hw->priv;
 491
 492        /* Just STA, AP and ADHOC for now */
 493        if (vif->type != NL80211_IFTYPE_STATION &&
 494            vif->type != NL80211_IFTYPE_AP &&
 495            vif->type != NL80211_IFTYPE_ADHOC) {
 496                brcms_err(wl->wlc->hw->d11core,
 497                          "%s: Attempt to add type %d, only STA, AP and AdHoc for now\n",
 498                          __func__, vif->type);
 499                return -EOPNOTSUPP;
 500        }
 501
 502        spin_lock_bh(&wl->lock);
 503        wl->wlc->vif = vif;
 504        wl->mute_tx = false;
 505        brcms_c_mute(wl->wlc, false);
 506        if (vif->type == NL80211_IFTYPE_STATION)
 507                brcms_c_start_station(wl->wlc, vif->addr);
 508        else if (vif->type == NL80211_IFTYPE_AP)
 509                brcms_c_start_ap(wl->wlc, vif->addr, vif->bss_conf.bssid,
 510                                 vif->bss_conf.ssid, vif->bss_conf.ssid_len);
 511        else if (vif->type == NL80211_IFTYPE_ADHOC)
 512                brcms_c_start_adhoc(wl->wlc, vif->addr);
 513        spin_unlock_bh(&wl->lock);
 514
 515        return 0;
 516}
 517
 518static void
 519brcms_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 520{
 521        struct brcms_info *wl = hw->priv;
 522
 523        spin_lock_bh(&wl->lock);
 524        wl->wlc->vif = NULL;
 525        spin_unlock_bh(&wl->lock);
 526}
 527
 528static int brcms_ops_config(struct ieee80211_hw *hw, u32 changed)
 529{
 530        struct ieee80211_conf *conf = &hw->conf;
 531        struct brcms_info *wl = hw->priv;
 532        struct bcma_device *core = wl->wlc->hw->d11core;
 533        int err = 0;
 534        int new_int;
 535
 536        spin_lock_bh(&wl->lock);
 537        if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {
 538                brcms_c_set_beacon_listen_interval(wl->wlc,
 539                                                   conf->listen_interval);
 540        }
 541        if (changed & IEEE80211_CONF_CHANGE_MONITOR)
 542                brcms_dbg_info(core, "%s: change monitor mode: %s\n",
 543                               __func__, conf->flags & IEEE80211_CONF_MONITOR ?
 544                               "true" : "false");
 545        if (changed & IEEE80211_CONF_CHANGE_PS)
 546                brcms_err(core, "%s: change power-save mode: %s (implement)\n",
 547                          __func__, conf->flags & IEEE80211_CONF_PS ?
 548                          "true" : "false");
 549
 550        if (changed & IEEE80211_CONF_CHANGE_POWER) {
 551                err = brcms_c_set_tx_power(wl->wlc, conf->power_level);
 552                if (err < 0) {
 553                        brcms_err(core, "%s: Error setting power_level\n",
 554                                  __func__);
 555                        goto config_out;
 556                }
 557                new_int = brcms_c_get_tx_power(wl->wlc);
 558                if (new_int != conf->power_level)
 559                        brcms_err(core,
 560                                  "%s: Power level req != actual, %d %d\n",
 561                                  __func__, conf->power_level,
 562                                  new_int);
 563        }
 564        if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
 565                if (conf->chandef.width == NL80211_CHAN_WIDTH_20 ||
 566                    conf->chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
 567                        err = brcms_c_set_channel(wl->wlc,
 568                                                  conf->chandef.chan->hw_value);
 569                else
 570                        err = -ENOTSUPP;
 571        }
 572        if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 573                err = brcms_c_set_rate_limit(wl->wlc,
 574                                             conf->short_frame_max_tx_count,
 575                                             conf->long_frame_max_tx_count);
 576
 577 config_out:
 578        spin_unlock_bh(&wl->lock);
 579        return err;
 580}
 581
 582static void
 583brcms_ops_bss_info_changed(struct ieee80211_hw *hw,
 584                        struct ieee80211_vif *vif,
 585                        struct ieee80211_bss_conf *info, u32 changed)
 586{
 587        struct brcms_info *wl = hw->priv;
 588        struct bcma_device *core = wl->wlc->hw->d11core;
 589
 590        if (changed & BSS_CHANGED_ASSOC) {
 591                /* association status changed (associated/disassociated)
 592                 * also implies a change in the AID.
 593                 */
 594                brcms_err(core, "%s: %s: %sassociated\n", KBUILD_MODNAME,
 595                          __func__, info->assoc ? "" : "dis");
 596                spin_lock_bh(&wl->lock);
 597                brcms_c_associate_upd(wl->wlc, info->assoc);
 598                spin_unlock_bh(&wl->lock);
 599        }
 600        if (changed & BSS_CHANGED_ERP_SLOT) {
 601                s8 val;
 602
 603                /* slot timing changed */
 604                if (info->use_short_slot)
 605                        val = 1;
 606                else
 607                        val = 0;
 608                spin_lock_bh(&wl->lock);
 609                brcms_c_set_shortslot_override(wl->wlc, val);
 610                spin_unlock_bh(&wl->lock);
 611        }
 612
 613        if (changed & BSS_CHANGED_HT) {
 614                /* 802.11n parameters changed */
 615                u16 mode = info->ht_operation_mode;
 616
 617                spin_lock_bh(&wl->lock);
 618                brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_CFG,
 619                        mode & IEEE80211_HT_OP_MODE_PROTECTION);
 620                brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_NONGF,
 621                        mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
 622                brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_OBSS,
 623                        mode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT);
 624                spin_unlock_bh(&wl->lock);
 625        }
 626        if (changed & BSS_CHANGED_BASIC_RATES) {
 627                struct ieee80211_supported_band *bi;
 628                u32 br_mask, i;
 629                u16 rate;
 630                struct brcm_rateset rs;
 631                int error;
 632
 633                /* retrieve the current rates */
 634                spin_lock_bh(&wl->lock);
 635                brcms_c_get_current_rateset(wl->wlc, &rs);
 636                spin_unlock_bh(&wl->lock);
 637
 638                br_mask = info->basic_rates;
 639                bi = hw->wiphy->bands[brcms_c_get_curband(wl->wlc)];
 640                for (i = 0; i < bi->n_bitrates; i++) {
 641                        /* convert to internal rate value */
 642                        rate = (bi->bitrates[i].bitrate << 1) / 10;
 643
 644                        /* set/clear basic rate flag */
 645                        brcms_set_basic_rate(&rs, rate, br_mask & 1);
 646                        br_mask >>= 1;
 647                }
 648
 649                /* update the rate set */
 650                spin_lock_bh(&wl->lock);
 651                error = brcms_c_set_rateset(wl->wlc, &rs);
 652                spin_unlock_bh(&wl->lock);
 653                if (error)
 654                        brcms_err(core, "changing basic rates failed: %d\n",
 655                                  error);
 656        }
 657        if (changed & BSS_CHANGED_BEACON_INT) {
 658                /* Beacon interval changed */
 659                spin_lock_bh(&wl->lock);
 660                brcms_c_set_beacon_period(wl->wlc, info->beacon_int);
 661                spin_unlock_bh(&wl->lock);
 662        }
 663        if (changed & BSS_CHANGED_BSSID) {
 664                /* BSSID changed, for whatever reason (IBSS and managed mode) */
 665                spin_lock_bh(&wl->lock);
 666                brcms_c_set_addrmatch(wl->wlc, RCM_BSSID_OFFSET, info->bssid);
 667                spin_unlock_bh(&wl->lock);
 668        }
 669        if (changed & BSS_CHANGED_SSID) {
 670                /* BSSID changed, for whatever reason (IBSS and managed mode) */
 671                spin_lock_bh(&wl->lock);
 672                brcms_c_set_ssid(wl->wlc, info->ssid, info->ssid_len);
 673                spin_unlock_bh(&wl->lock);
 674        }
 675        if (changed & BSS_CHANGED_BEACON) {
 676                /* Beacon data changed, retrieve new beacon (beaconing modes) */
 677                struct sk_buff *beacon;
 678                u16 tim_offset = 0;
 679
 680                spin_lock_bh(&wl->lock);
 681                beacon = ieee80211_beacon_get_tim(hw, vif, &tim_offset, NULL);
 682                brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset,
 683                                       info->dtim_period);
 684                spin_unlock_bh(&wl->lock);
 685        }
 686
 687        if (changed & BSS_CHANGED_AP_PROBE_RESP) {
 688                struct sk_buff *probe_resp;
 689
 690                spin_lock_bh(&wl->lock);
 691                probe_resp = ieee80211_proberesp_get(hw, vif);
 692                brcms_c_set_new_probe_resp(wl->wlc, probe_resp);
 693                spin_unlock_bh(&wl->lock);
 694        }
 695
 696        if (changed & BSS_CHANGED_BEACON_ENABLED) {
 697                /* Beaconing should be enabled/disabled (beaconing modes) */
 698                brcms_err(core, "%s: Beacon enabled: %s\n", __func__,
 699                          info->enable_beacon ? "true" : "false");
 700                if (info->enable_beacon &&
 701                    hw->wiphy->flags & WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD) {
 702                        brcms_c_enable_probe_resp(wl->wlc, true);
 703                } else {
 704                        brcms_c_enable_probe_resp(wl->wlc, false);
 705                }
 706        }
 707
 708        if (changed & BSS_CHANGED_CQM) {
 709                /* Connection quality monitor config changed */
 710                brcms_err(core, "%s: cqm change: threshold %d, hys %d "
 711                          " (implement)\n", __func__, info->cqm_rssi_thold,
 712                          info->cqm_rssi_hyst);
 713        }
 714
 715        if (changed & BSS_CHANGED_IBSS) {
 716                /* IBSS join status changed */
 717                brcms_err(core, "%s: IBSS joined: %s (implement)\n",
 718                          __func__, info->ibss_joined ? "true" : "false");
 719        }
 720
 721        if (changed & BSS_CHANGED_ARP_FILTER) {
 722                /* Hardware ARP filter address list or state changed */
 723                brcms_err(core, "%s: arp filtering: %d addresses"
 724                          " (implement)\n", __func__, info->arp_addr_cnt);
 725        }
 726
 727        if (changed & BSS_CHANGED_QOS) {
 728                /*
 729                 * QoS for this association was enabled/disabled.
 730                 * Note that it is only ever disabled for station mode.
 731                 */
 732                brcms_err(core, "%s: qos enabled: %s (implement)\n",
 733                          __func__, info->qos ? "true" : "false");
 734        }
 735        return;
 736}
 737
 738static void
 739brcms_ops_configure_filter(struct ieee80211_hw *hw,
 740                        unsigned int changed_flags,
 741                        unsigned int *total_flags, u64 multicast)
 742{
 743        struct brcms_info *wl = hw->priv;
 744        struct bcma_device *core = wl->wlc->hw->d11core;
 745
 746        changed_flags &= MAC_FILTERS;
 747        *total_flags &= MAC_FILTERS;
 748
 749        if (changed_flags & FIF_ALLMULTI)
 750                brcms_dbg_info(core, "FIF_ALLMULTI\n");
 751        if (changed_flags & FIF_FCSFAIL)
 752                brcms_dbg_info(core, "FIF_FCSFAIL\n");
 753        if (changed_flags & FIF_CONTROL)
 754                brcms_dbg_info(core, "FIF_CONTROL\n");
 755        if (changed_flags & FIF_OTHER_BSS)
 756                brcms_dbg_info(core, "FIF_OTHER_BSS\n");
 757        if (changed_flags & FIF_PSPOLL)
 758                brcms_dbg_info(core, "FIF_PSPOLL\n");
 759        if (changed_flags & FIF_BCN_PRBRESP_PROMISC)
 760                brcms_dbg_info(core, "FIF_BCN_PRBRESP_PROMISC\n");
 761
 762        spin_lock_bh(&wl->lock);
 763        brcms_c_mac_promisc(wl->wlc, *total_flags);
 764        spin_unlock_bh(&wl->lock);
 765        return;
 766}
 767
 768static void brcms_ops_sw_scan_start(struct ieee80211_hw *hw,
 769                                    struct ieee80211_vif *vif,
 770                                    const u8 *mac_addr)
 771{
 772        struct brcms_info *wl = hw->priv;
 773        spin_lock_bh(&wl->lock);
 774        brcms_c_scan_start(wl->wlc);
 775        spin_unlock_bh(&wl->lock);
 776        return;
 777}
 778
 779static void brcms_ops_sw_scan_complete(struct ieee80211_hw *hw,
 780                                       struct ieee80211_vif *vif)
 781{
 782        struct brcms_info *wl = hw->priv;
 783        spin_lock_bh(&wl->lock);
 784        brcms_c_scan_stop(wl->wlc);
 785        spin_unlock_bh(&wl->lock);
 786        return;
 787}
 788
 789static int
 790brcms_ops_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue,
 791                  const struct ieee80211_tx_queue_params *params)
 792{
 793        struct brcms_info *wl = hw->priv;
 794
 795        spin_lock_bh(&wl->lock);
 796        brcms_c_wme_setparams(wl->wlc, queue, params, true);
 797        spin_unlock_bh(&wl->lock);
 798
 799        return 0;
 800}
 801
 802static int
 803brcms_ops_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 804               struct ieee80211_sta *sta)
 805{
 806        struct brcms_info *wl = hw->priv;
 807        struct scb *scb = &wl->wlc->pri_scb;
 808
 809        brcms_c_init_scb(scb);
 810
 811        wl->pub->global_ampdu = &(scb->scb_ampdu);
 812        wl->pub->global_ampdu->scb = scb;
 813        wl->pub->global_ampdu->max_pdu = 16;
 814
 815        /*
 816         * minstrel_ht initiates addBA on our behalf by calling
 817         * ieee80211_start_tx_ba_session()
 818         */
 819        return 0;
 820}
 821
 822static int
 823brcms_ops_ampdu_action(struct ieee80211_hw *hw,
 824                    struct ieee80211_vif *vif,
 825                    struct ieee80211_ampdu_params *params)
 826{
 827        struct brcms_info *wl = hw->priv;
 828        struct scb *scb = &wl->wlc->pri_scb;
 829        int status;
 830        struct ieee80211_sta *sta = params->sta;
 831        enum ieee80211_ampdu_mlme_action action = params->action;
 832        u16 tid = params->tid;
 833        u8 buf_size = params->buf_size;
 834
 835        if (WARN_ON(scb->magic != SCB_MAGIC))
 836                return -EIDRM;
 837        switch (action) {
 838        case IEEE80211_AMPDU_RX_START:
 839                break;
 840        case IEEE80211_AMPDU_RX_STOP:
 841                break;
 842        case IEEE80211_AMPDU_TX_START:
 843                spin_lock_bh(&wl->lock);
 844                status = brcms_c_aggregatable(wl->wlc, tid);
 845                spin_unlock_bh(&wl->lock);
 846                if (!status) {
 847                        brcms_dbg_ht(wl->wlc->hw->d11core,
 848                                     "START: tid %d is not agg\'able\n", tid);
 849                        return -EINVAL;
 850                }
 851                return IEEE80211_AMPDU_TX_START_IMMEDIATE;
 852
 853        case IEEE80211_AMPDU_TX_STOP_CONT:
 854        case IEEE80211_AMPDU_TX_STOP_FLUSH:
 855        case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
 856                spin_lock_bh(&wl->lock);
 857                brcms_c_ampdu_flush(wl->wlc, sta, tid);
 858                spin_unlock_bh(&wl->lock);
 859                ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
 860                break;
 861        case IEEE80211_AMPDU_TX_OPERATIONAL:
 862                /*
 863                 * BA window size from ADDBA response ('buf_size') defines how
 864                 * many outstanding MPDUs are allowed for the BA stream by
 865                 * recipient and traffic class. 'ampdu_factor' gives maximum
 866                 * AMPDU size.
 867                 */
 868                spin_lock_bh(&wl->lock);
 869                brcms_c_ampdu_tx_operational(wl->wlc, tid, buf_size,
 870                        (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
 871                         sta->ht_cap.ampdu_factor)) - 1);
 872                spin_unlock_bh(&wl->lock);
 873                /* Power save wakeup */
 874                break;
 875        default:
 876                brcms_err(wl->wlc->hw->d11core,
 877                          "%s: Invalid command, ignoring\n", __func__);
 878        }
 879
 880        return 0;
 881}
 882
 883static void brcms_ops_rfkill_poll(struct ieee80211_hw *hw)
 884{
 885        struct brcms_info *wl = hw->priv;
 886        bool blocked;
 887
 888        spin_lock_bh(&wl->lock);
 889        blocked = brcms_c_check_radio_disabled(wl->wlc);
 890        spin_unlock_bh(&wl->lock);
 891
 892        wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
 893}
 894
 895static bool brcms_tx_flush_completed(struct brcms_info *wl)
 896{
 897        bool result;
 898
 899        spin_lock_bh(&wl->lock);
 900        result = brcms_c_tx_flush_completed(wl->wlc);
 901        spin_unlock_bh(&wl->lock);
 902        return result;
 903}
 904
 905static void brcms_ops_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 906                            u32 queues, bool drop)
 907{
 908        struct brcms_info *wl = hw->priv;
 909        int ret;
 910
 911        no_printk("%s: drop = %s\n", __func__, drop ? "true" : "false");
 912
 913        ret = wait_event_timeout(wl->tx_flush_wq,
 914                                 brcms_tx_flush_completed(wl),
 915                                 msecs_to_jiffies(BRCMS_FLUSH_TIMEOUT));
 916
 917        brcms_dbg_mac80211(wl->wlc->hw->d11core,
 918                           "ret=%d\n", jiffies_to_msecs(ret));
 919}
 920
 921static u64 brcms_ops_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 922{
 923        struct brcms_info *wl = hw->priv;
 924        u64 tsf;
 925
 926        spin_lock_bh(&wl->lock);
 927        tsf = brcms_c_tsf_get(wl->wlc);
 928        spin_unlock_bh(&wl->lock);
 929
 930        return tsf;
 931}
 932
 933static void brcms_ops_set_tsf(struct ieee80211_hw *hw,
 934                           struct ieee80211_vif *vif, u64 tsf)
 935{
 936        struct brcms_info *wl = hw->priv;
 937
 938        spin_lock_bh(&wl->lock);
 939        brcms_c_tsf_set(wl->wlc, tsf);
 940        spin_unlock_bh(&wl->lock);
 941}
 942
 943static int brcms_ops_beacon_set_tim(struct ieee80211_hw *hw,
 944                                 struct ieee80211_sta *sta, bool set)
 945{
 946        struct brcms_info *wl = hw->priv;
 947        struct sk_buff *beacon = NULL;
 948        u16 tim_offset = 0;
 949
 950        spin_lock_bh(&wl->lock);
 951        if (wl->wlc->vif)
 952                beacon = ieee80211_beacon_get_tim(hw, wl->wlc->vif,
 953                                                  &tim_offset, NULL);
 954        if (beacon)
 955                brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset,
 956                                       wl->wlc->vif->bss_conf.dtim_period);
 957        spin_unlock_bh(&wl->lock);
 958
 959        return 0;
 960}
 961
 962static const struct ieee80211_ops brcms_ops = {
 963        .tx = brcms_ops_tx,
 964        .start = brcms_ops_start,
 965        .stop = brcms_ops_stop,
 966        .add_interface = brcms_ops_add_interface,
 967        .remove_interface = brcms_ops_remove_interface,
 968        .config = brcms_ops_config,
 969        .bss_info_changed = brcms_ops_bss_info_changed,
 970        .configure_filter = brcms_ops_configure_filter,
 971        .sw_scan_start = brcms_ops_sw_scan_start,
 972        .sw_scan_complete = brcms_ops_sw_scan_complete,
 973        .conf_tx = brcms_ops_conf_tx,
 974        .sta_add = brcms_ops_sta_add,
 975        .ampdu_action = brcms_ops_ampdu_action,
 976        .rfkill_poll = brcms_ops_rfkill_poll,
 977        .flush = brcms_ops_flush,
 978        .get_tsf = brcms_ops_get_tsf,
 979        .set_tsf = brcms_ops_set_tsf,
 980        .set_tim = brcms_ops_beacon_set_tim,
 981};
 982
 983void brcms_dpc(struct tasklet_struct *t)
 984{
 985        struct brcms_info *wl;
 986
 987        wl = from_tasklet(wl, t, tasklet);
 988
 989        spin_lock_bh(&wl->lock);
 990
 991        /* call the common second level interrupt handler */
 992        if (wl->pub->up) {
 993                if (wl->resched) {
 994                        unsigned long flags;
 995
 996                        spin_lock_irqsave(&wl->isr_lock, flags);
 997                        brcms_c_intrsupd(wl->wlc);
 998                        spin_unlock_irqrestore(&wl->isr_lock, flags);
 999                }
1000
1001                wl->resched = brcms_c_dpc(wl->wlc, true);
1002        }
1003
1004        /* brcms_c_dpc() may bring the driver down */
1005        if (!wl->pub->up)
1006                goto done;
1007
1008        /* re-schedule dpc */
1009        if (wl->resched)
1010                tasklet_schedule(&wl->tasklet);
1011        else
1012                /* re-enable interrupts */
1013                brcms_intrson(wl);
1014
1015 done:
1016        spin_unlock_bh(&wl->lock);
1017        wake_up(&wl->tx_flush_wq);
1018}
1019
1020static irqreturn_t brcms_isr(int irq, void *dev_id)
1021{
1022        struct brcms_info *wl;
1023        irqreturn_t ret = IRQ_NONE;
1024
1025        wl = (struct brcms_info *) dev_id;
1026
1027        spin_lock(&wl->isr_lock);
1028
1029        /* call common first level interrupt handler */
1030        if (brcms_c_isr(wl->wlc)) {
1031                /* schedule second level handler */
1032                tasklet_schedule(&wl->tasklet);
1033                ret = IRQ_HANDLED;
1034        }
1035
1036        spin_unlock(&wl->isr_lock);
1037
1038        return ret;
1039}
1040
1041/*
1042 * is called in brcms_pci_probe() context, therefore no locking required.
1043 */
1044static int ieee_hw_rate_init(struct ieee80211_hw *hw)
1045{
1046        struct brcms_info *wl = hw->priv;
1047        struct brcms_c_info *wlc = wl->wlc;
1048        struct ieee80211_supported_band *band;
1049        int has_5g = 0;
1050        u16 phy_type;
1051
1052        hw->wiphy->bands[NL80211_BAND_2GHZ] = NULL;
1053        hw->wiphy->bands[NL80211_BAND_5GHZ] = NULL;
1054
1055        phy_type = brcms_c_get_phy_type(wl->wlc, 0);
1056        if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) {
1057                band = &wlc->bandstate[BAND_2G_INDEX]->band;
1058                *band = brcms_band_2GHz_nphy_template;
1059                if (phy_type == PHY_TYPE_LCN) {
1060                        /* Single stream */
1061                        band->ht_cap.mcs.rx_mask[1] = 0;
1062                        band->ht_cap.mcs.rx_highest = cpu_to_le16(72);
1063                }
1064                hw->wiphy->bands[NL80211_BAND_2GHZ] = band;
1065        } else {
1066                return -EPERM;
1067        }
1068
1069        /* Assume all bands use the same phy.  True for 11n devices. */
1070        if (wl->pub->_nbands > 1) {
1071                has_5g++;
1072                if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) {
1073                        band = &wlc->bandstate[BAND_5G_INDEX]->band;
1074                        *band = brcms_band_5GHz_nphy_template;
1075                        hw->wiphy->bands[NL80211_BAND_5GHZ] = band;
1076                } else {
1077                        return -EPERM;
1078                }
1079        }
1080        return 0;
1081}
1082
1083/*
1084 * is called in brcms_pci_probe() context, therefore no locking required.
1085 */
1086static int ieee_hw_init(struct ieee80211_hw *hw)
1087{
1088        ieee80211_hw_set(hw, AMPDU_AGGREGATION);
1089        ieee80211_hw_set(hw, SIGNAL_DBM);
1090        ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS);
1091
1092        hw->extra_tx_headroom = brcms_c_get_header_len();
1093        hw->queues = N_TX_QUEUES;
1094        hw->max_rates = 2;      /* Primary rate and 1 fallback rate */
1095
1096        /* channel change time is dependent on chip and band  */
1097        hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
1098                                     BIT(NL80211_IFTYPE_AP) |
1099                                     BIT(NL80211_IFTYPE_ADHOC);
1100
1101        /*
1102         * deactivate sending probe responses by ucude, because this will
1103         * cause problems when WPS is used.
1104         *
1105         * hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
1106         */
1107
1108        wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
1109
1110        hw->rate_control_algorithm = "minstrel_ht";
1111
1112        hw->sta_data_size = 0;
1113        return ieee_hw_rate_init(hw);
1114}
1115
1116/*
1117 * attach to the WL device.
1118 *
1119 * Attach to the WL device identified by vendor and device parameters.
1120 * regs is a host accessible memory address pointing to WL device registers.
1121 *
1122 * is called in brcms_bcma_probe() context, therefore no locking required.
1123 */
1124static struct brcms_info *brcms_attach(struct bcma_device *pdev)
1125{
1126        struct brcms_info *wl = NULL;
1127        int unit, err;
1128        struct ieee80211_hw *hw;
1129        u8 perm[ETH_ALEN];
1130
1131        unit = n_adapters_found;
1132        err = 0;
1133
1134        if (unit < 0)
1135                return NULL;
1136
1137        /* allocate private info */
1138        hw = bcma_get_drvdata(pdev);
1139        if (hw != NULL)
1140                wl = hw->priv;
1141        if (WARN_ON(hw == NULL) || WARN_ON(wl == NULL))
1142                return NULL;
1143        wl->wiphy = hw->wiphy;
1144
1145        atomic_set(&wl->callbacks, 0);
1146
1147        init_waitqueue_head(&wl->tx_flush_wq);
1148
1149        /* setup the bottom half handler */
1150        tasklet_setup(&wl->tasklet, brcms_dpc);
1151
1152        spin_lock_init(&wl->lock);
1153        spin_lock_init(&wl->isr_lock);
1154
1155        /* common load-time initialization */
1156        wl->wlc = brcms_c_attach((void *)wl, pdev, unit, false, &err);
1157        if (!wl->wlc) {
1158                wiphy_err(wl->wiphy, "%s: attach() failed with code %d\n",
1159                          KBUILD_MODNAME, err);
1160                goto fail;
1161        }
1162        wl->pub = brcms_c_pub(wl->wlc);
1163
1164        wl->pub->ieee_hw = hw;
1165
1166        /* register our interrupt handler */
1167        if (request_irq(pdev->irq, brcms_isr,
1168                        IRQF_SHARED, KBUILD_MODNAME, wl)) {
1169                wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit);
1170                goto fail;
1171        }
1172        wl->irq = pdev->irq;
1173
1174        /* register module */
1175        brcms_c_module_register(wl->pub, "linux", wl, NULL);
1176
1177        if (ieee_hw_init(hw)) {
1178                wiphy_err(wl->wiphy, "wl%d: %s: ieee_hw_init failed!\n", unit,
1179                          __func__);
1180                goto fail;
1181        }
1182
1183        brcms_c_regd_init(wl->wlc);
1184
1185        memcpy(perm, &wl->pub->cur_etheraddr, ETH_ALEN);
1186        if (WARN_ON(!is_valid_ether_addr(perm)))
1187                goto fail;
1188        SET_IEEE80211_PERM_ADDR(hw, perm);
1189
1190        err = ieee80211_register_hw(hw);
1191        if (err)
1192                wiphy_err(wl->wiphy, "%s: ieee80211_register_hw failed, status"
1193                          "%d\n", __func__, err);
1194
1195        if (wl->pub->srom_ccode[0] &&
1196            regulatory_hint(wl->wiphy, wl->pub->srom_ccode))
1197                wiphy_err(wl->wiphy, "%s: regulatory hint failed\n", __func__);
1198
1199        brcms_debugfs_attach(wl->pub);
1200        brcms_debugfs_create_files(wl->pub);
1201        n_adapters_found++;
1202        return wl;
1203
1204fail:
1205        brcms_free(wl);
1206        return NULL;
1207}
1208
1209
1210
1211/*
1212 * determines if a device is a WL device, and if so, attaches it.
1213 *
1214 * This function determines if a device pointed to by pdev is a WL device,
1215 * and if so, performs a brcms_attach() on it.
1216 *
1217 * Perimeter lock is initialized in the course of this function.
1218 */
1219static int brcms_bcma_probe(struct bcma_device *pdev)
1220{
1221        struct brcms_info *wl;
1222        struct ieee80211_hw *hw;
1223        int ret;
1224
1225        dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n",
1226                 pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class,
1227                 pdev->irq);
1228
1229        if ((pdev->id.manuf != BCMA_MANUF_BCM) ||
1230            (pdev->id.id != BCMA_CORE_80211))
1231                return -ENODEV;
1232
1233        hw = ieee80211_alloc_hw(sizeof(struct brcms_info), &brcms_ops);
1234        if (!hw) {
1235                pr_err("%s: ieee80211_alloc_hw failed\n", __func__);
1236                return -ENOMEM;
1237        }
1238
1239        SET_IEEE80211_DEV(hw, &pdev->dev);
1240
1241        bcma_set_drvdata(pdev, hw);
1242
1243        memset(hw->priv, 0, sizeof(*wl));
1244
1245        wl = brcms_attach(pdev);
1246        if (!wl) {
1247                pr_err("%s: brcms_attach failed!\n", __func__);
1248                ret = -ENODEV;
1249                goto err_free_ieee80211;
1250        }
1251        brcms_led_register(wl);
1252
1253        return 0;
1254
1255err_free_ieee80211:
1256        ieee80211_free_hw(hw);
1257        return ret;
1258}
1259
1260static int brcms_suspend(struct bcma_device *pdev)
1261{
1262        struct brcms_info *wl;
1263        struct ieee80211_hw *hw;
1264
1265        hw = bcma_get_drvdata(pdev);
1266        wl = hw->priv;
1267        if (!wl) {
1268                pr_err("%s: %s: no driver private struct!\n", KBUILD_MODNAME,
1269                       __func__);
1270                return -ENODEV;
1271        }
1272
1273        /* only need to flag hw is down for proper resume */
1274        spin_lock_bh(&wl->lock);
1275        wl->pub->hw_up = false;
1276        spin_unlock_bh(&wl->lock);
1277
1278        brcms_dbg_info(wl->wlc->hw->d11core, "brcms_suspend ok\n");
1279
1280        return 0;
1281}
1282
1283static int brcms_resume(struct bcma_device *pdev)
1284{
1285        return 0;
1286}
1287
1288static struct bcma_driver brcms_bcma_driver = {
1289        .name     = KBUILD_MODNAME,
1290        .probe    = brcms_bcma_probe,
1291        .suspend  = brcms_suspend,
1292        .resume   = brcms_resume,
1293        .remove   = brcms_remove,
1294        .id_table = brcms_coreid_table,
1295};
1296
1297/*
1298 * This is the main entry point for the brcmsmac driver.
1299 *
1300 * This function is scheduled upon module initialization and
1301 * does the driver registration, which result in brcms_bcma_probe()
1302 * call resulting in the driver bringup.
1303 */
1304static void brcms_driver_init(struct work_struct *work)
1305{
1306        int error;
1307
1308        error = bcma_driver_register(&brcms_bcma_driver);
1309        if (error)
1310                pr_err("%s: register returned %d\n", __func__, error);
1311}
1312
1313static DECLARE_WORK(brcms_driver_work, brcms_driver_init);
1314
1315static int __init brcms_module_init(void)
1316{
1317        brcms_debugfs_init();
1318        if (!schedule_work(&brcms_driver_work))
1319                return -EBUSY;
1320
1321        return 0;
1322}
1323
1324/*
1325 * This function unloads the brcmsmac driver from the system.
1326 *
1327 * This function unconditionally unloads the brcmsmac driver module from the
1328 * system.
1329 *
1330 */
1331static void __exit brcms_module_exit(void)
1332{
1333        cancel_work_sync(&brcms_driver_work);
1334        bcma_driver_unregister(&brcms_bcma_driver);
1335        brcms_debugfs_exit();
1336}
1337
1338module_init(brcms_module_init);
1339module_exit(brcms_module_exit);
1340
1341/*
1342 * precondition: perimeter lock has been acquired
1343 */
1344void brcms_txflowcontrol(struct brcms_info *wl, struct brcms_if *wlif,
1345                         bool state, int prio)
1346{
1347        brcms_err(wl->wlc->hw->d11core, "Shouldn't be here %s\n", __func__);
1348}
1349
1350/*
1351 * precondition: perimeter lock has been acquired
1352 */
1353void brcms_init(struct brcms_info *wl)
1354{
1355        brcms_dbg_info(wl->wlc->hw->d11core, "Initializing wl%d\n",
1356                       wl->pub->unit);
1357        brcms_reset(wl);
1358        brcms_c_init(wl->wlc, wl->mute_tx);
1359}
1360
1361/*
1362 * precondition: perimeter lock has been acquired
1363 */
1364uint brcms_reset(struct brcms_info *wl)
1365{
1366        brcms_dbg_info(wl->wlc->hw->d11core, "Resetting wl%d\n", wl->pub->unit);
1367        brcms_c_reset(wl->wlc);
1368
1369        /* dpc will not be rescheduled */
1370        wl->resched = false;
1371
1372        /* inform publicly that interface is down */
1373        wl->pub->up = false;
1374
1375        return 0;
1376}
1377
1378void brcms_fatal_error(struct brcms_info *wl)
1379{
1380        brcms_err(wl->wlc->hw->d11core, "wl%d: fatal error, reinitializing\n",
1381                  wl->wlc->pub->unit);
1382        brcms_reset(wl);
1383        ieee80211_restart_hw(wl->pub->ieee_hw);
1384}
1385
1386/*
1387 * These are interrupt on/off entry points. Disable interrupts
1388 * during interrupt state transition.
1389 */
1390void brcms_intrson(struct brcms_info *wl)
1391{
1392        unsigned long flags;
1393
1394        spin_lock_irqsave(&wl->isr_lock, flags);
1395        brcms_c_intrson(wl->wlc);
1396        spin_unlock_irqrestore(&wl->isr_lock, flags);
1397}
1398
1399u32 brcms_intrsoff(struct brcms_info *wl)
1400{
1401        unsigned long flags;
1402        u32 status;
1403
1404        spin_lock_irqsave(&wl->isr_lock, flags);
1405        status = brcms_c_intrsoff(wl->wlc);
1406        spin_unlock_irqrestore(&wl->isr_lock, flags);
1407        return status;
1408}
1409
1410void brcms_intrsrestore(struct brcms_info *wl, u32 macintmask)
1411{
1412        unsigned long flags;
1413
1414        spin_lock_irqsave(&wl->isr_lock, flags);
1415        brcms_c_intrsrestore(wl->wlc, macintmask);
1416        spin_unlock_irqrestore(&wl->isr_lock, flags);
1417}
1418
1419/*
1420 * precondition: perimeter lock has been acquired
1421 */
1422int brcms_up(struct brcms_info *wl)
1423{
1424        int error = 0;
1425
1426        if (wl->pub->up)
1427                return 0;
1428
1429        error = brcms_c_up(wl->wlc);
1430
1431        return error;
1432}
1433
1434/*
1435 * precondition: perimeter lock has been acquired
1436 */
1437void brcms_down(struct brcms_info *wl)
1438        __must_hold(&wl->lock)
1439{
1440        uint callbacks, ret_val = 0;
1441
1442        /* call common down function */
1443        ret_val = brcms_c_down(wl->wlc);
1444        callbacks = atomic_read(&wl->callbacks) - ret_val;
1445
1446        /* wait for down callbacks to complete */
1447        spin_unlock_bh(&wl->lock);
1448
1449        /* For HIGH_only driver, it's important to actually schedule other work,
1450         * not just spin wait since everything runs at schedule level
1451         */
1452        SPINWAIT((atomic_read(&wl->callbacks) > callbacks), 100 * 1000);
1453
1454        spin_lock_bh(&wl->lock);
1455}
1456
1457/*
1458* precondition: perimeter lock is not acquired
1459 */
1460static void _brcms_timer(struct work_struct *work)
1461{
1462        struct brcms_timer *t = container_of(work, struct brcms_timer,
1463                                             dly_wrk.work);
1464
1465        spin_lock_bh(&t->wl->lock);
1466
1467        if (t->set) {
1468                if (t->periodic) {
1469                        atomic_inc(&t->wl->callbacks);
1470                        ieee80211_queue_delayed_work(t->wl->pub->ieee_hw,
1471                                                     &t->dly_wrk,
1472                                                     msecs_to_jiffies(t->ms));
1473                } else {
1474                        t->set = false;
1475                }
1476
1477                t->fn(t->arg);
1478        }
1479
1480        atomic_dec(&t->wl->callbacks);
1481
1482        spin_unlock_bh(&t->wl->lock);
1483}
1484
1485/*
1486 * Adds a timer to the list. Caller supplies a timer function.
1487 * Is called from wlc.
1488 *
1489 * precondition: perimeter lock has been acquired
1490 */
1491struct brcms_timer *brcms_init_timer(struct brcms_info *wl,
1492                                     void (*fn) (void *arg),
1493                                     void *arg, const char *name)
1494{
1495        struct brcms_timer *t;
1496
1497        t = kzalloc(sizeof(struct brcms_timer), GFP_ATOMIC);
1498        if (!t)
1499                return NULL;
1500
1501        INIT_DELAYED_WORK(&t->dly_wrk, _brcms_timer);
1502        t->wl = wl;
1503        t->fn = fn;
1504        t->arg = arg;
1505        t->next = wl->timers;
1506        wl->timers = t;
1507
1508#ifdef DEBUG
1509        t->name = kstrdup(name, GFP_ATOMIC);
1510#endif
1511
1512        return t;
1513}
1514
1515/*
1516 * adds only the kernel timer since it's going to be more accurate
1517 * as well as it's easier to make it periodic
1518 *
1519 * precondition: perimeter lock has been acquired
1520 */
1521void brcms_add_timer(struct brcms_timer *t, uint ms, int periodic)
1522{
1523        struct ieee80211_hw *hw = t->wl->pub->ieee_hw;
1524
1525#ifdef DEBUG
1526        if (t->set)
1527                brcms_dbg_info(t->wl->wlc->hw->d11core,
1528                               "%s: Already set. Name: %s, per %d\n",
1529                               __func__, t->name, periodic);
1530#endif
1531        t->ms = ms;
1532        t->periodic = (bool) periodic;
1533        if (!t->set) {
1534                t->set = true;
1535                atomic_inc(&t->wl->callbacks);
1536        }
1537
1538        ieee80211_queue_delayed_work(hw, &t->dly_wrk, msecs_to_jiffies(ms));
1539}
1540
1541/*
1542 * return true if timer successfully deleted, false if still pending
1543 *
1544 * precondition: perimeter lock has been acquired
1545 */
1546bool brcms_del_timer(struct brcms_timer *t)
1547{
1548        if (t->set) {
1549                t->set = false;
1550                if (!cancel_delayed_work(&t->dly_wrk))
1551                        return false;
1552
1553                atomic_dec(&t->wl->callbacks);
1554        }
1555
1556        return true;
1557}
1558
1559/*
1560 * precondition: perimeter lock has been acquired
1561 */
1562void brcms_free_timer(struct brcms_timer *t)
1563{
1564        struct brcms_info *wl = t->wl;
1565        struct brcms_timer *tmp;
1566
1567        /* delete the timer in case it is active */
1568        brcms_del_timer(t);
1569
1570        if (wl->timers == t) {
1571                wl->timers = wl->timers->next;
1572#ifdef DEBUG
1573                kfree(t->name);
1574#endif
1575                kfree(t);
1576                return;
1577
1578        }
1579
1580        tmp = wl->timers;
1581        while (tmp) {
1582                if (tmp->next == t) {
1583                        tmp->next = t->next;
1584#ifdef DEBUG
1585                        kfree(t->name);
1586#endif
1587                        kfree(t);
1588                        return;
1589                }
1590                tmp = tmp->next;
1591        }
1592
1593}
1594
1595/*
1596 * precondition: no locking required
1597 */
1598int brcms_ucode_init_buf(struct brcms_info *wl, void **pbuf, u32 idx)
1599{
1600        int i, entry;
1601        const u8 *pdata;
1602        struct firmware_hdr *hdr;
1603        for (i = 0; i < wl->fw.fw_cnt; i++) {
1604                hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data;
1605                for (entry = 0; entry < wl->fw.hdr_num_entries[i];
1606                     entry++, hdr++) {
1607                        u32 len = le32_to_cpu(hdr->len);
1608                        if (le32_to_cpu(hdr->idx) == idx) {
1609                                pdata = wl->fw.fw_bin[i]->data +
1610                                        le32_to_cpu(hdr->offset);
1611                                *pbuf = kvmalloc(len, GFP_KERNEL);
1612                                if (*pbuf == NULL)
1613                                        goto fail;
1614                                memcpy(*pbuf, pdata, len);
1615                                return 0;
1616                        }
1617                }
1618        }
1619        brcms_err(wl->wlc->hw->d11core,
1620                  "ERROR: ucode buf tag:%d can not be found!\n", idx);
1621        *pbuf = NULL;
1622fail:
1623        return -ENODATA;
1624}
1625
1626/*
1627 * Precondition: Since this function is called in brcms_bcma_probe() context,
1628 * no locking is required.
1629 */
1630int brcms_ucode_init_uint(struct brcms_info *wl, size_t *n_bytes, u32 idx)
1631{
1632        int i, entry;
1633        const u8 *pdata;
1634        struct firmware_hdr *hdr;
1635        for (i = 0; i < wl->fw.fw_cnt; i++) {
1636                hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data;
1637                for (entry = 0; entry < wl->fw.hdr_num_entries[i];
1638                     entry++, hdr++) {
1639                        if (le32_to_cpu(hdr->idx) == idx) {
1640                                pdata = wl->fw.fw_bin[i]->data +
1641                                        le32_to_cpu(hdr->offset);
1642                                if (le32_to_cpu(hdr->len) != 4) {
1643                                        brcms_err(wl->wlc->hw->d11core,
1644                                                  "ERROR: fw hdr len\n");
1645                                        return -ENOMSG;
1646                                }
1647                                *n_bytes = le32_to_cpu(*((__le32 *) pdata));
1648                                return 0;
1649                        }
1650                }
1651        }
1652        brcms_err(wl->wlc->hw->d11core,
1653                  "ERROR: ucode tag:%d can not be found!\n", idx);
1654        return -ENOMSG;
1655}
1656
1657/*
1658 * precondition: can both be called locked and unlocked
1659 */
1660void brcms_ucode_free_buf(void *p)
1661{
1662        kvfree(p);
1663}
1664
1665/*
1666 * checks validity of all firmware images loaded from user space
1667 *
1668 * Precondition: Since this function is called in brcms_bcma_probe() context,
1669 * no locking is required.
1670 */
1671int brcms_check_firmwares(struct brcms_info *wl)
1672{
1673        int i;
1674        int entry;
1675        int rc = 0;
1676        const struct firmware *fw;
1677        const struct firmware *fw_hdr;
1678        struct firmware_hdr *ucode_hdr;
1679        for (i = 0; i < MAX_FW_IMAGES && rc == 0; i++) {
1680                fw =  wl->fw.fw_bin[i];
1681                fw_hdr = wl->fw.fw_hdr[i];
1682                if (fw == NULL && fw_hdr == NULL) {
1683                        break;
1684                } else if (fw == NULL || fw_hdr == NULL) {
1685                        wiphy_err(wl->wiphy, "%s: invalid bin/hdr fw\n",
1686                                  __func__);
1687                        rc = -EBADF;
1688                } else if (fw_hdr->size % sizeof(struct firmware_hdr)) {
1689                        wiphy_err(wl->wiphy, "%s: non integral fw hdr file "
1690                                "size %zu/%zu\n", __func__, fw_hdr->size,
1691                                sizeof(struct firmware_hdr));
1692                        rc = -EBADF;
1693                } else if (fw->size < MIN_FW_SIZE || fw->size > MAX_FW_SIZE) {
1694                        wiphy_err(wl->wiphy, "%s: out of bounds fw file size %zu\n",
1695                                  __func__, fw->size);
1696                        rc = -EBADF;
1697                } else {
1698                        /* check if ucode section overruns firmware image */
1699                        ucode_hdr = (struct firmware_hdr *)fw_hdr->data;
1700                        for (entry = 0; entry < wl->fw.hdr_num_entries[i] &&
1701                             !rc; entry++, ucode_hdr++) {
1702                                if (le32_to_cpu(ucode_hdr->offset) +
1703                                    le32_to_cpu(ucode_hdr->len) >
1704                                    fw->size) {
1705                                        wiphy_err(wl->wiphy,
1706                                                  "%s: conflicting bin/hdr\n",
1707                                                  __func__);
1708                                        rc = -EBADF;
1709                                }
1710                        }
1711                }
1712        }
1713        if (rc == 0 && wl->fw.fw_cnt != i) {
1714                wiphy_err(wl->wiphy, "%s: invalid fw_cnt=%d\n", __func__,
1715                        wl->fw.fw_cnt);
1716                rc = -EBADF;
1717        }
1718        return rc;
1719}
1720
1721/*
1722 * precondition: perimeter lock has been acquired
1723 */
1724bool brcms_rfkill_set_hw_state(struct brcms_info *wl)
1725        __must_hold(&wl->lock)
1726{
1727        bool blocked = brcms_c_check_radio_disabled(wl->wlc);
1728
1729        spin_unlock_bh(&wl->lock);
1730        wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
1731        if (blocked)
1732                wiphy_rfkill_start_polling(wl->pub->ieee_hw->wiphy);
1733        spin_lock_bh(&wl->lock);
1734        return blocked;
1735}
1736