LXR linux/arch/m68k/Kconfig.devices

   1# SPDX-License-Identifier: GPL-2.0
   2if MMU
   3
   4config ARCH_MAY_HAVE_PC_FDC
   5        bool
   6        depends on BROKEN && (Q40 || SUN3X)
   7        default y
   8
   9menu "Platform devices"
  10
  11config HEARTBEAT
  12        bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
  13        default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300
  14        help
  15          Use the power-on LED on your machine as a load meter.  The exact
  16          behavior is platform-dependent, but normally the flash frequency is
  17          a hyperbolic function of the 5-minute load average.
  18
  19# We have a dedicated heartbeat LED. :-)
  20config PROC_HARDWARE
  21        bool "/proc/hardware support"
  22        help
  23          Say Y here to support the /proc/hardware file, which gives you
  24          access to information about the machine you're running on,
  25          including the model, CPU, MMU, clock speed, BogoMIPS rating,
  26          and memory size.
  27
  28config NATFEAT
  29        bool "ARAnyM emulator support"
  30        depends on ATARI
  31        help
  32          This option enables support for ARAnyM native features, such as
  33          access to a disk image as /dev/hda.
  34
  35config NFBLOCK
  36        tristate "NatFeat block device support"
  37        depends on BLOCK && NATFEAT
  38        help
  39          Say Y to include support for the ARAnyM NatFeat block device
  40          which allows direct access to the hard drives without using
  41          the hardware emulation.
  42
  43config NFCON
  44        tristate "NatFeat console driver"
  45        depends on TTY && NATFEAT
  46        help
  47          Say Y to include support for the ARAnyM NatFeat console driver
  48          which allows the console output to be redirected to the stderr
  49          output of ARAnyM.
  50
  51config NFETH
  52        tristate "NatFeat Ethernet support"
  53        depends on ETHERNET && NATFEAT
  54        help
  55          Say Y to include support for the ARAnyM NatFeat network device
  56          which will emulate a regular ethernet device while presenting an
  57          ethertap device to the host system.
  58
  59config ATARI_ETHERNAT
  60        bool "Atari EtherNAT Ethernet support"
  61        depends on ATARI
  62        help
  63          Say Y to include support for the EtherNAT network adapter for the
  64          CT/60 extension port.
  65
  66          To compile the actual ethernet driver, choose Y or M for the SMC91X
  67          option in the network device section; the module will be called smc91x.
  68
  69config ATARI_ETHERNEC
  70        bool "Atari EtherNEC Ethernet support"
  71        depends on ATARI_ROM_ISA
  72        help
  73          Say Y to include support for the EtherNEC network adapter for the
  74          ROM port. The driver works by polling instead of interrupts, so it
  75          is quite slow.
  76
  77          This driver also supports the ethernet part of the NetUSBee ROM
  78          port combined Ethernet/USB adapter.
  79
  80          To compile the actual ethernet driver, choose Y or M in for the NE2000
  81          option in the network device section; the module will be called ne.
  82
  83endmenu
  84
  85menu "Character devices"
  86
  87config ATARI_DSP56K
  88        tristate "Atari DSP56k support"
  89        depends on ATARI
  90        help
  91          If you want to be able to use the DSP56001 in Falcons, say Y. This
  92          driver is still experimental, and if you don't know what it is, or
  93          if you don't have this processor, just say N.
  94
  95          To compile this driver as a module, choose M here.
  96
  97config AMIGA_BUILTIN_SERIAL
  98        tristate "Amiga builtin serial support"
  99        depends on AMIGA && TTY
 100        help
 101          If you want to use your Amiga's built-in serial port in Linux,
 102          answer Y.
 103
 104          To compile this driver as a module, choose M here.
 105
 106config HPDCA
 107        tristate "HP DCA serial support"
 108        depends on DIO && SERIAL_8250
 109        help
 110          If you want to use the internal "DCA" serial ports on an HP300
 111          machine, say Y here.
 112
 113config HPAPCI
 114        tristate "HP APCI serial support"
 115        depends on HP300 && SERIAL_8250
 116        help
 117          If you want to use the internal "APCI" serial ports on an HP400
 118          machine, say Y here.
 119
 120config SERIAL_CONSOLE
 121        bool "Support for serial port console"
 122        depends on AMIGA_BUILTIN_SERIAL=y
 123        help
 124          If you say Y here, it will be possible to use a serial port as the
 125          system console (the system console is the device which receives all
 126          kernel messages and warnings and which allows logins in single user
 127          mode). This could be useful if some terminal or printer is connected
 128          to that serial port.
 129
 130          Even if you say Y here, the currently visible virtual console
 131          (/dev/tty0) will still be used as the system console by default, but
 132          you can alter that using a kernel command line option such as
 133          "console=ttyS1". (Try "man bootparam" or see the documentation of
 134          your boot loader about how to pass options to the kernel at boot
 135          time.)
 136
 137          If you don't have a graphical console and you say Y here, the
 138          kernel will automatically use the first serial line, /dev/ttyS0, as
 139          system console.
 140
 141          If unsure, say N.
 142
 143endmenu
 144
 145endif
 146