linux/drivers/media/dvb-frontends/isl6421.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 * isl6421.h - driver for lnb supply and control ic ISL6421
   4 *
   5 * Copyright (C) 2006 Andrew de Quincey
   6 * Copyright (C) 2006 Oliver Endriss
   7 *
   8 * the project's page is at https://linuxtv.org
   9 */
  10#include <linux/delay.h>
  11#include <linux/errno.h>
  12#include <linux/init.h>
  13#include <linux/kernel.h>
  14#include <linux/module.h>
  15#include <linux/string.h>
  16#include <linux/slab.h>
  17
  18#include <media/dvb_frontend.h>
  19#include "isl6421.h"
  20
  21struct isl6421 {
  22        u8                      config;
  23        u8                      override_or;
  24        u8                      override_and;
  25        struct i2c_adapter      *i2c;
  26        u8                      i2c_addr;
  27        bool                    is_off;
  28};
  29
  30static int isl6421_set_voltage(struct dvb_frontend *fe,
  31                               enum fe_sec_voltage voltage)
  32{
  33        int ret;
  34        u8 buf;
  35        bool is_off;
  36        struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv;
  37        struct i2c_msg msg[2] = {
  38                {
  39                  .addr = isl6421->i2c_addr,
  40                  .flags = 0,
  41                  .buf = &isl6421->config,
  42                  .len = 1,
  43                }, {
  44                  .addr = isl6421->i2c_addr,
  45                  .flags = I2C_M_RD,
  46                  .buf = &buf,
  47                  .len = 1,
  48                }
  49
  50        };
  51
  52        isl6421->config &= ~(ISL6421_VSEL1 | ISL6421_EN1);
  53
  54        switch(voltage) {
  55        case SEC_VOLTAGE_OFF:
  56                is_off = true;
  57                break;
  58        case SEC_VOLTAGE_13:
  59                is_off = false;
  60                isl6421->config |= ISL6421_EN1;
  61                break;
  62        case SEC_VOLTAGE_18:
  63                is_off = false;
  64                isl6421->config |= (ISL6421_EN1 | ISL6421_VSEL1);
  65                break;
  66        default:
  67                return -EINVAL;
  68        }
  69
  70        /*
  71         * If LNBf were not powered on, disable dynamic current limit, as,
  72         * according with datasheet, highly capacitive load on the output may
  73         * cause a difficult start-up.
  74         */
  75        if (isl6421->is_off && !is_off)
  76                isl6421->config |= ISL6421_DCL;
  77
  78        isl6421->config |= isl6421->override_or;
  79        isl6421->config &= isl6421->override_and;
  80
  81        ret = i2c_transfer(isl6421->i2c, msg, 2);
  82        if (ret < 0)
  83                return ret;
  84        if (ret != 2)
  85                return -EIO;
  86
  87        /* Store off status now in case future commands fail */
  88        isl6421->is_off = is_off;
  89
  90        /* On overflow, the device will try again after 900 ms (typically) */
  91        if (!is_off && (buf & ISL6421_OLF1))
  92                msleep(1000);
  93
  94        /* Re-enable dynamic current limit */
  95        if ((isl6421->config & ISL6421_DCL) &&
  96            !(isl6421->override_or & ISL6421_DCL)) {
  97                isl6421->config &= ~ISL6421_DCL;
  98
  99                ret = i2c_transfer(isl6421->i2c, msg, 2);
 100                if (ret < 0)
 101                        return ret;
 102                if (ret != 2)
 103                        return -EIO;
 104        }
 105
 106        /* Check if overload flag is active. If so, disable power */
 107        if (!is_off && (buf & ISL6421_OLF1)) {
 108                isl6421->config &= ~(ISL6421_VSEL1 | ISL6421_EN1);
 109                ret = i2c_transfer(isl6421->i2c, msg, 1);
 110                if (ret < 0)
 111                        return ret;
 112                if (ret != 1)
 113                        return -EIO;
 114                isl6421->is_off = true;
 115
 116                dev_warn(&isl6421->i2c->dev,
 117                         "Overload current detected. disabling LNBf power\n");
 118                return -EINVAL;
 119        }
 120
 121        return 0;
 122}
 123
 124static int isl6421_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg)
 125{
 126        struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv;
 127        struct i2c_msg msg = {  .addr = isl6421->i2c_addr, .flags = 0,
 128                                .buf = &isl6421->config,
 129                                .len = sizeof(isl6421->config) };
 130
 131        if (arg)
 132                isl6421->config |= ISL6421_LLC1;
 133        else
 134                isl6421->config &= ~ISL6421_LLC1;
 135
 136        isl6421->config |= isl6421->override_or;
 137        isl6421->config &= isl6421->override_and;
 138
 139        return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO;
 140}
 141
 142static int isl6421_set_tone(struct dvb_frontend *fe,
 143                            enum fe_sec_tone_mode tone)
 144{
 145        struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv;
 146        struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0,
 147                               .buf = &isl6421->config,
 148                               .len = sizeof(isl6421->config) };
 149
 150        switch (tone) {
 151        case SEC_TONE_ON:
 152                isl6421->config |= ISL6421_ENT1;
 153                break;
 154        case SEC_TONE_OFF:
 155                isl6421->config &= ~ISL6421_ENT1;
 156                break;
 157        default:
 158                return -EINVAL;
 159        }
 160
 161        isl6421->config |= isl6421->override_or;
 162        isl6421->config &= isl6421->override_and;
 163
 164        return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO;
 165}
 166
 167static void isl6421_release(struct dvb_frontend *fe)
 168{
 169        /* power off */
 170        isl6421_set_voltage(fe, SEC_VOLTAGE_OFF);
 171
 172        /* free */
 173        kfree(fe->sec_priv);
 174        fe->sec_priv = NULL;
 175}
 176
 177struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr,
 178                   u8 override_set, u8 override_clear, bool override_tone)
 179{
 180        struct isl6421 *isl6421 = kmalloc(sizeof(struct isl6421), GFP_KERNEL);
 181        if (!isl6421)
 182                return NULL;
 183
 184        /* default configuration */
 185        isl6421->config = ISL6421_ISEL1;
 186        isl6421->i2c = i2c;
 187        isl6421->i2c_addr = i2c_addr;
 188        fe->sec_priv = isl6421;
 189
 190        /* bits which should be forced to '1' */
 191        isl6421->override_or = override_set;
 192
 193        /* bits which should be forced to '0' */
 194        isl6421->override_and = ~override_clear;
 195
 196        /* detect if it is present or not */
 197        if (isl6421_set_voltage(fe, SEC_VOLTAGE_OFF)) {
 198                kfree(isl6421);
 199                fe->sec_priv = NULL;
 200                return NULL;
 201        }
 202
 203        isl6421->is_off = true;
 204
 205        /* install release callback */
 206        fe->ops.release_sec = isl6421_release;
 207
 208        /* override frontend ops */
 209        fe->ops.set_voltage = isl6421_set_voltage;
 210        fe->ops.enable_high_lnb_voltage = isl6421_enable_high_lnb_voltage;
 211        if (override_tone)
 212                fe->ops.set_tone = isl6421_set_tone;
 213
 214        return fe;
 215}
 216EXPORT_SYMBOL(isl6421_attach);
 217
 218MODULE_DESCRIPTION("Driver for lnb supply and control ic isl6421");
 219MODULE_AUTHOR("Andrew de Quincey & Oliver Endriss");
 220MODULE_LICENSE("GPL");
 221