linux/drivers/mmc/host/sdhci-of-aspeed.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/* Copyright (C) 2019 ASPEED Technology Inc. */
   3/* Copyright (C) 2019 IBM Corp. */
   4
   5#include <linux/clk.h>
   6#include <linux/delay.h>
   7#include <linux/device.h>
   8#include <linux/io.h>
   9#include <linux/math64.h>
  10#include <linux/mmc/host.h>
  11#include <linux/module.h>
  12#include <linux/of_address.h>
  13#include <linux/of.h>
  14#include <linux/of_platform.h>
  15#include <linux/platform_device.h>
  16#include <linux/spinlock.h>
  17
  18#include "sdhci-pltfm.h"
  19
  20#define ASPEED_SDC_INFO                 0x00
  21#define   ASPEED_SDC_S1_MMC8            BIT(25)
  22#define   ASPEED_SDC_S0_MMC8            BIT(24)
  23#define ASPEED_SDC_PHASE                0xf4
  24#define   ASPEED_SDC_S1_PHASE_IN        GENMASK(25, 21)
  25#define   ASPEED_SDC_S0_PHASE_IN        GENMASK(20, 16)
  26#define   ASPEED_SDC_S1_PHASE_OUT       GENMASK(15, 11)
  27#define   ASPEED_SDC_S1_PHASE_IN_EN     BIT(10)
  28#define   ASPEED_SDC_S1_PHASE_OUT_EN    GENMASK(9, 8)
  29#define   ASPEED_SDC_S0_PHASE_OUT       GENMASK(7, 3)
  30#define   ASPEED_SDC_S0_PHASE_IN_EN     BIT(2)
  31#define   ASPEED_SDC_S0_PHASE_OUT_EN    GENMASK(1, 0)
  32#define   ASPEED_SDC_PHASE_MAX          31
  33
  34/* SDIO{10,20} */
  35#define ASPEED_SDC_CAP1_1_8V           (0 * 32 + 26)
  36/* SDIO{14,24} */
  37#define ASPEED_SDC_CAP2_SDR104         (1 * 32 + 1)
  38
  39struct aspeed_sdc {
  40        struct clk *clk;
  41        struct resource *res;
  42
  43        spinlock_t lock;
  44        void __iomem *regs;
  45};
  46
  47struct aspeed_sdhci_tap_param {
  48        bool valid;
  49
  50#define ASPEED_SDHCI_TAP_PARAM_INVERT_CLK       BIT(4)
  51        u8 in;
  52        u8 out;
  53};
  54
  55struct aspeed_sdhci_tap_desc {
  56        u32 tap_mask;
  57        u32 enable_mask;
  58        u8 enable_value;
  59};
  60
  61struct aspeed_sdhci_phase_desc {
  62        struct aspeed_sdhci_tap_desc in;
  63        struct aspeed_sdhci_tap_desc out;
  64};
  65
  66struct aspeed_sdhci_pdata {
  67        unsigned int clk_div_start;
  68        const struct aspeed_sdhci_phase_desc *phase_desc;
  69        size_t nr_phase_descs;
  70};
  71
  72struct aspeed_sdhci {
  73        const struct aspeed_sdhci_pdata *pdata;
  74        struct aspeed_sdc *parent;
  75        u32 width_mask;
  76        struct mmc_clk_phase_map phase_map;
  77        const struct aspeed_sdhci_phase_desc *phase_desc;
  78};
  79
  80/*
  81 * The function sets the mirror register for updating
  82 * capbilities of the current slot.
  83 *
  84 *   slot | capability  | caps_reg | mirror_reg
  85 *   -----|-------------|----------|------------
  86 *     0  | CAP1_1_8V   | SDIO140  |   SDIO10
  87 *     0  | CAP2_SDR104 | SDIO144  |   SDIO14
  88 *     1  | CAP1_1_8V   | SDIO240  |   SDIO20
  89 *     1  | CAP2_SDR104 | SDIO244  |   SDIO24
  90 */
  91static void aspeed_sdc_set_slot_capability(struct sdhci_host *host, struct aspeed_sdc *sdc,
  92                                           int capability, bool enable, u8 slot)
  93{
  94        u32 mirror_reg_offset;
  95        u32 cap_val;
  96        u8 cap_reg;
  97
  98        if (slot > 1)
  99                return;
 100
 101        cap_reg = capability / 32;
 102        cap_val = sdhci_readl(host, 0x40 + (cap_reg * 4));
 103        if (enable)
 104                cap_val |= BIT(capability % 32);
 105        else
 106                cap_val &= ~BIT(capability % 32);
 107        mirror_reg_offset = ((slot + 1) * 0x10) + (cap_reg * 4);
 108        writel(cap_val, sdc->regs + mirror_reg_offset);
 109}
 110
 111static void aspeed_sdc_configure_8bit_mode(struct aspeed_sdc *sdc,
 112                                           struct aspeed_sdhci *sdhci,
 113                                           bool bus8)
 114{
 115        u32 info;
 116
 117        /* Set/clear 8 bit mode */
 118        spin_lock(&sdc->lock);
 119        info = readl(sdc->regs + ASPEED_SDC_INFO);
 120        if (bus8)
 121                info |= sdhci->width_mask;
 122        else
 123                info &= ~sdhci->width_mask;
 124        writel(info, sdc->regs + ASPEED_SDC_INFO);
 125        spin_unlock(&sdc->lock);
 126}
 127
 128static u32
 129aspeed_sdc_set_phase_tap(const struct aspeed_sdhci_tap_desc *desc,
 130                         u8 tap, bool enable, u32 reg)
 131{
 132        reg &= ~(desc->enable_mask | desc->tap_mask);
 133        if (enable) {
 134                reg |= tap << __ffs(desc->tap_mask);
 135                reg |= desc->enable_value << __ffs(desc->enable_mask);
 136        }
 137
 138        return reg;
 139}
 140
 141static void
 142aspeed_sdc_set_phase_taps(struct aspeed_sdc *sdc,
 143                          const struct aspeed_sdhci_phase_desc *desc,
 144                          const struct aspeed_sdhci_tap_param *taps)
 145{
 146        u32 reg;
 147
 148        spin_lock(&sdc->lock);
 149        reg = readl(sdc->regs + ASPEED_SDC_PHASE);
 150
 151        reg = aspeed_sdc_set_phase_tap(&desc->in, taps->in, taps->valid, reg);
 152        reg = aspeed_sdc_set_phase_tap(&desc->out, taps->out, taps->valid, reg);
 153
 154        writel(reg, sdc->regs + ASPEED_SDC_PHASE);
 155        spin_unlock(&sdc->lock);
 156}
 157
 158#define PICOSECONDS_PER_SECOND          1000000000000ULL
 159#define ASPEED_SDHCI_NR_TAPS            15
 160/* Measured value with *handwave* environmentals and static loading */
 161#define ASPEED_SDHCI_MAX_TAP_DELAY_PS   1253
 162static int aspeed_sdhci_phase_to_tap(struct device *dev, unsigned long rate_hz,
 163                                     int phase_deg)
 164{
 165        u64 phase_period_ps;
 166        u64 prop_delay_ps;
 167        u64 clk_period_ps;
 168        unsigned int tap;
 169        u8 inverted;
 170
 171        phase_deg %= 360;
 172
 173        if (phase_deg >= 180) {
 174                inverted = ASPEED_SDHCI_TAP_PARAM_INVERT_CLK;
 175                phase_deg -= 180;
 176                dev_dbg(dev,
 177                        "Inverting clock to reduce phase correction from %d to %d degrees\n",
 178                        phase_deg + 180, phase_deg);
 179        } else {
 180                inverted = 0;
 181        }
 182
 183        prop_delay_ps = ASPEED_SDHCI_MAX_TAP_DELAY_PS / ASPEED_SDHCI_NR_TAPS;
 184        clk_period_ps = div_u64(PICOSECONDS_PER_SECOND, (u64)rate_hz);
 185        phase_period_ps = div_u64((u64)phase_deg * clk_period_ps, 360ULL);
 186
 187        tap = div_u64(phase_period_ps, prop_delay_ps);
 188        if (tap > ASPEED_SDHCI_NR_TAPS) {
 189                dev_dbg(dev,
 190                         "Requested out of range phase tap %d for %d degrees of phase compensation at %luHz, clamping to tap %d\n",
 191                         tap, phase_deg, rate_hz, ASPEED_SDHCI_NR_TAPS);
 192                tap = ASPEED_SDHCI_NR_TAPS;
 193        }
 194
 195        return inverted | tap;
 196}
 197
 198static void
 199aspeed_sdhci_phases_to_taps(struct device *dev, unsigned long rate,
 200                            const struct mmc_clk_phase *phases,
 201                            struct aspeed_sdhci_tap_param *taps)
 202{
 203        taps->valid = phases->valid;
 204
 205        if (!phases->valid)
 206                return;
 207
 208        taps->in = aspeed_sdhci_phase_to_tap(dev, rate, phases->in_deg);
 209        taps->out = aspeed_sdhci_phase_to_tap(dev, rate, phases->out_deg);
 210}
 211
 212static void
 213aspeed_sdhci_configure_phase(struct sdhci_host *host, unsigned long rate)
 214{
 215        struct aspeed_sdhci_tap_param _taps = {0}, *taps = &_taps;
 216        struct mmc_clk_phase *params;
 217        struct aspeed_sdhci *sdhci;
 218        struct device *dev;
 219
 220        dev = mmc_dev(host->mmc);
 221        sdhci = sdhci_pltfm_priv(sdhci_priv(host));
 222
 223        if (!sdhci->phase_desc)
 224                return;
 225
 226        params = &sdhci->phase_map.phase[host->timing];
 227        aspeed_sdhci_phases_to_taps(dev, rate, params, taps);
 228        aspeed_sdc_set_phase_taps(sdhci->parent, sdhci->phase_desc, taps);
 229        dev_dbg(dev,
 230                "Using taps [%d, %d] for [%d, %d] degrees of phase correction at %luHz (%d)\n",
 231                taps->in & ASPEED_SDHCI_NR_TAPS,
 232                taps->out & ASPEED_SDHCI_NR_TAPS,
 233                params->in_deg, params->out_deg, rate, host->timing);
 234}
 235
 236static void aspeed_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 237{
 238        struct sdhci_pltfm_host *pltfm_host;
 239        unsigned long parent, bus;
 240        struct aspeed_sdhci *sdhci;
 241        int div;
 242        u16 clk;
 243
 244        pltfm_host = sdhci_priv(host);
 245        sdhci = sdhci_pltfm_priv(pltfm_host);
 246
 247        parent = clk_get_rate(pltfm_host->clk);
 248
 249        sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
 250
 251        if (clock == 0)
 252                return;
 253
 254        if (WARN_ON(clock > host->max_clk))
 255                clock = host->max_clk;
 256
 257        /*
 258         * Regarding the AST2600:
 259         *
 260         * If (EMMC12C[7:6], EMMC12C[15:8] == 0) then
 261         *   period of SDCLK = period of SDMCLK.
 262         *
 263         * If (EMMC12C[7:6], EMMC12C[15:8] != 0) then
 264         *   period of SDCLK = period of SDMCLK * 2 * (EMMC12C[7:6], EMMC[15:8])
 265         *
 266         * If you keep EMMC12C[7:6] = 0 and EMMC12C[15:8] as one-hot,
 267         * 0x1/0x2/0x4/etc, you will find it is compatible to AST2400 or AST2500
 268         *
 269         * Keep the one-hot behaviour for backwards compatibility except for
 270         * supporting the value 0 in (EMMC12C[7:6], EMMC12C[15:8]), and capture
 271         * the 0-value capability in clk_div_start.
 272         */
 273        for (div = sdhci->pdata->clk_div_start; div < 256; div *= 2) {
 274                bus = parent / div;
 275                if (bus <= clock)
 276                        break;
 277        }
 278
 279        div >>= 1;
 280
 281        clk = div << SDHCI_DIVIDER_SHIFT;
 282
 283        aspeed_sdhci_configure_phase(host, bus);
 284
 285        sdhci_enable_clk(host, clk);
 286}
 287
 288static unsigned int aspeed_sdhci_get_max_clock(struct sdhci_host *host)
 289{
 290        if (host->mmc->f_max)
 291                return host->mmc->f_max;
 292
 293        return sdhci_pltfm_clk_get_max_clock(host);
 294}
 295
 296static void aspeed_sdhci_set_bus_width(struct sdhci_host *host, int width)
 297{
 298        struct sdhci_pltfm_host *pltfm_priv;
 299        struct aspeed_sdhci *aspeed_sdhci;
 300        struct aspeed_sdc *aspeed_sdc;
 301        u8 ctrl;
 302
 303        pltfm_priv = sdhci_priv(host);
 304        aspeed_sdhci = sdhci_pltfm_priv(pltfm_priv);
 305        aspeed_sdc = aspeed_sdhci->parent;
 306
 307        /* Set/clear 8-bit mode */
 308        aspeed_sdc_configure_8bit_mode(aspeed_sdc, aspeed_sdhci,
 309                                       width == MMC_BUS_WIDTH_8);
 310
 311        /* Set/clear 1 or 4 bit mode */
 312        ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 313        if (width == MMC_BUS_WIDTH_4)
 314                ctrl |= SDHCI_CTRL_4BITBUS;
 315        else
 316                ctrl &= ~SDHCI_CTRL_4BITBUS;
 317        sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 318}
 319
 320static u32 aspeed_sdhci_readl(struct sdhci_host *host, int reg)
 321{
 322        u32 val = readl(host->ioaddr + reg);
 323
 324        if (unlikely(reg == SDHCI_PRESENT_STATE) &&
 325            (host->mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH))
 326                val ^= SDHCI_CARD_PRESENT;
 327
 328        return val;
 329}
 330
 331static const struct sdhci_ops aspeed_sdhci_ops = {
 332        .read_l = aspeed_sdhci_readl,
 333        .set_clock = aspeed_sdhci_set_clock,
 334        .get_max_clock = aspeed_sdhci_get_max_clock,
 335        .set_bus_width = aspeed_sdhci_set_bus_width,
 336        .get_timeout_clock = sdhci_pltfm_clk_get_max_clock,
 337        .reset = sdhci_reset,
 338        .set_uhs_signaling = sdhci_set_uhs_signaling,
 339};
 340
 341static const struct sdhci_pltfm_data aspeed_sdhci_pdata = {
 342        .ops = &aspeed_sdhci_ops,
 343        .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
 344};
 345
 346static inline int aspeed_sdhci_calculate_slot(struct aspeed_sdhci *dev,
 347                                              struct resource *res)
 348{
 349        resource_size_t delta;
 350
 351        if (!res || resource_type(res) != IORESOURCE_MEM)
 352                return -EINVAL;
 353
 354        if (res->start < dev->parent->res->start)
 355                return -EINVAL;
 356
 357        delta = res->start - dev->parent->res->start;
 358        if (delta & (0x100 - 1))
 359                return -EINVAL;
 360
 361        return (delta / 0x100) - 1;
 362}
 363
 364static int aspeed_sdhci_probe(struct platform_device *pdev)
 365{
 366        const struct aspeed_sdhci_pdata *aspeed_pdata;
 367        struct device_node *np = pdev->dev.of_node;
 368        struct sdhci_pltfm_host *pltfm_host;
 369        struct aspeed_sdhci *dev;
 370        struct sdhci_host *host;
 371        struct resource *res;
 372        int slot;
 373        int ret;
 374
 375        aspeed_pdata = of_device_get_match_data(&pdev->dev);
 376        if (!aspeed_pdata) {
 377                dev_err(&pdev->dev, "Missing platform configuration data\n");
 378                return -EINVAL;
 379        }
 380
 381        host = sdhci_pltfm_init(pdev, &aspeed_sdhci_pdata, sizeof(*dev));
 382        if (IS_ERR(host))
 383                return PTR_ERR(host);
 384
 385        pltfm_host = sdhci_priv(host);
 386        dev = sdhci_pltfm_priv(pltfm_host);
 387        dev->pdata = aspeed_pdata;
 388        dev->parent = dev_get_drvdata(pdev->dev.parent);
 389
 390        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 391        slot = aspeed_sdhci_calculate_slot(dev, res);
 392
 393        if (slot < 0)
 394                return slot;
 395        else if (slot >= 2)
 396                return -EINVAL;
 397
 398        if (slot < dev->pdata->nr_phase_descs) {
 399                dev->phase_desc = &dev->pdata->phase_desc[slot];
 400        } else {
 401                dev_info(&pdev->dev,
 402                         "Phase control not supported for slot %d\n", slot);
 403                dev->phase_desc = NULL;
 404        }
 405
 406        dev->width_mask = !slot ? ASPEED_SDC_S0_MMC8 : ASPEED_SDC_S1_MMC8;
 407
 408        dev_info(&pdev->dev, "Configured for slot %d\n", slot);
 409
 410        sdhci_get_of_property(pdev);
 411
 412        if (of_property_read_bool(np, "mmc-hs200-1_8v") ||
 413            of_property_read_bool(np, "sd-uhs-sdr104")) {
 414                aspeed_sdc_set_slot_capability(host, dev->parent, ASPEED_SDC_CAP1_1_8V,
 415                                               true, slot);
 416        }
 417
 418        if (of_property_read_bool(np, "sd-uhs-sdr104")) {
 419                aspeed_sdc_set_slot_capability(host, dev->parent, ASPEED_SDC_CAP2_SDR104,
 420                                               true, slot);
 421        }
 422
 423        pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
 424        if (IS_ERR(pltfm_host->clk))
 425                return PTR_ERR(pltfm_host->clk);
 426
 427        ret = clk_prepare_enable(pltfm_host->clk);
 428        if (ret) {
 429                dev_err(&pdev->dev, "Unable to enable SDIO clock\n");
 430                goto err_pltfm_free;
 431        }
 432
 433        ret = mmc_of_parse(host->mmc);
 434        if (ret)
 435                goto err_sdhci_add;
 436
 437        if (dev->phase_desc)
 438                mmc_of_parse_clk_phase(host->mmc, &dev->phase_map);
 439
 440        ret = sdhci_add_host(host);
 441        if (ret)
 442                goto err_sdhci_add;
 443
 444        return 0;
 445
 446err_sdhci_add:
 447        clk_disable_unprepare(pltfm_host->clk);
 448err_pltfm_free:
 449        sdhci_pltfm_free(pdev);
 450        return ret;
 451}
 452
 453static int aspeed_sdhci_remove(struct platform_device *pdev)
 454{
 455        struct sdhci_pltfm_host *pltfm_host;
 456        struct sdhci_host *host;
 457        int dead = 0;
 458
 459        host = platform_get_drvdata(pdev);
 460        pltfm_host = sdhci_priv(host);
 461
 462        sdhci_remove_host(host, dead);
 463
 464        clk_disable_unprepare(pltfm_host->clk);
 465
 466        sdhci_pltfm_free(pdev);
 467
 468        return 0;
 469}
 470
 471static const struct aspeed_sdhci_pdata ast2400_sdhci_pdata = {
 472        .clk_div_start = 2,
 473};
 474
 475static const struct aspeed_sdhci_phase_desc ast2600_sdhci_phase[] = {
 476        /* SDHCI/Slot 0 */
 477        [0] = {
 478                .in = {
 479                        .tap_mask = ASPEED_SDC_S0_PHASE_IN,
 480                        .enable_mask = ASPEED_SDC_S0_PHASE_IN_EN,
 481                        .enable_value = 1,
 482                },
 483                .out = {
 484                        .tap_mask = ASPEED_SDC_S0_PHASE_OUT,
 485                        .enable_mask = ASPEED_SDC_S0_PHASE_OUT_EN,
 486                        .enable_value = 3,
 487                },
 488        },
 489        /* SDHCI/Slot 1 */
 490        [1] = {
 491                .in = {
 492                        .tap_mask = ASPEED_SDC_S1_PHASE_IN,
 493                        .enable_mask = ASPEED_SDC_S1_PHASE_IN_EN,
 494                        .enable_value = 1,
 495                },
 496                .out = {
 497                        .tap_mask = ASPEED_SDC_S1_PHASE_OUT,
 498                        .enable_mask = ASPEED_SDC_S1_PHASE_OUT_EN,
 499                        .enable_value = 3,
 500                },
 501        },
 502};
 503
 504static const struct aspeed_sdhci_pdata ast2600_sdhci_pdata = {
 505        .clk_div_start = 1,
 506        .phase_desc = ast2600_sdhci_phase,
 507        .nr_phase_descs = ARRAY_SIZE(ast2600_sdhci_phase),
 508};
 509
 510static const struct of_device_id aspeed_sdhci_of_match[] = {
 511        { .compatible = "aspeed,ast2400-sdhci", .data = &ast2400_sdhci_pdata, },
 512        { .compatible = "aspeed,ast2500-sdhci", .data = &ast2400_sdhci_pdata, },
 513        { .compatible = "aspeed,ast2600-sdhci", .data = &ast2600_sdhci_pdata, },
 514        { }
 515};
 516
 517static struct platform_driver aspeed_sdhci_driver = {
 518        .driver         = {
 519                .name   = "sdhci-aspeed",
 520                .probe_type = PROBE_PREFER_ASYNCHRONOUS,
 521                .of_match_table = aspeed_sdhci_of_match,
 522        },
 523        .probe          = aspeed_sdhci_probe,
 524        .remove         = aspeed_sdhci_remove,
 525};
 526
 527static int aspeed_sdc_probe(struct platform_device *pdev)
 528
 529{
 530        struct device_node *parent, *child;
 531        struct aspeed_sdc *sdc;
 532        int ret;
 533
 534        sdc = devm_kzalloc(&pdev->dev, sizeof(*sdc), GFP_KERNEL);
 535        if (!sdc)
 536                return -ENOMEM;
 537
 538        spin_lock_init(&sdc->lock);
 539
 540        sdc->clk = devm_clk_get(&pdev->dev, NULL);
 541        if (IS_ERR(sdc->clk))
 542                return PTR_ERR(sdc->clk);
 543
 544        ret = clk_prepare_enable(sdc->clk);
 545        if (ret) {
 546                dev_err(&pdev->dev, "Unable to enable SDCLK\n");
 547                return ret;
 548        }
 549
 550        sdc->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 551        sdc->regs = devm_ioremap_resource(&pdev->dev, sdc->res);
 552        if (IS_ERR(sdc->regs)) {
 553                ret = PTR_ERR(sdc->regs);
 554                goto err_clk;
 555        }
 556
 557        dev_set_drvdata(&pdev->dev, sdc);
 558
 559        parent = pdev->dev.of_node;
 560        for_each_available_child_of_node(parent, child) {
 561                struct platform_device *cpdev;
 562
 563                cpdev = of_platform_device_create(child, NULL, &pdev->dev);
 564                if (!cpdev) {
 565                        of_node_put(child);
 566                        ret = -ENODEV;
 567                        goto err_clk;
 568                }
 569        }
 570
 571        return 0;
 572
 573err_clk:
 574        clk_disable_unprepare(sdc->clk);
 575        return ret;
 576}
 577
 578static int aspeed_sdc_remove(struct platform_device *pdev)
 579{
 580        struct aspeed_sdc *sdc = dev_get_drvdata(&pdev->dev);
 581
 582        clk_disable_unprepare(sdc->clk);
 583
 584        return 0;
 585}
 586
 587static const struct of_device_id aspeed_sdc_of_match[] = {
 588        { .compatible = "aspeed,ast2400-sd-controller", },
 589        { .compatible = "aspeed,ast2500-sd-controller", },
 590        { .compatible = "aspeed,ast2600-sd-controller", },
 591        { }
 592};
 593
 594MODULE_DEVICE_TABLE(of, aspeed_sdc_of_match);
 595
 596static struct platform_driver aspeed_sdc_driver = {
 597        .driver         = {
 598                .name   = "sd-controller-aspeed",
 599                .probe_type = PROBE_PREFER_ASYNCHRONOUS,
 600                .pm     = &sdhci_pltfm_pmops,
 601                .of_match_table = aspeed_sdc_of_match,
 602        },
 603        .probe          = aspeed_sdc_probe,
 604        .remove         = aspeed_sdc_remove,
 605};
 606
 607#if defined(CONFIG_MMC_SDHCI_OF_ASPEED_TEST)
 608#include "sdhci-of-aspeed-test.c"
 609
 610static inline int aspeed_sdc_tests_init(void)
 611{
 612        return __kunit_test_suites_init(aspeed_sdc_test_suites);
 613}
 614
 615static inline void aspeed_sdc_tests_exit(void)
 616{
 617        __kunit_test_suites_exit(aspeed_sdc_test_suites);
 618}
 619#else
 620static inline int aspeed_sdc_tests_init(void)
 621{
 622        return 0;
 623}
 624
 625static inline void aspeed_sdc_tests_exit(void)
 626{
 627}
 628#endif
 629
 630static int __init aspeed_sdc_init(void)
 631{
 632        int rc;
 633
 634        rc = platform_driver_register(&aspeed_sdhci_driver);
 635        if (rc < 0)
 636                return rc;
 637
 638        rc = platform_driver_register(&aspeed_sdc_driver);
 639        if (rc < 0)
 640                goto cleanup_sdhci;
 641
 642        rc = aspeed_sdc_tests_init();
 643        if (rc < 0) {
 644                platform_driver_unregister(&aspeed_sdc_driver);
 645                goto cleanup_sdhci;
 646        }
 647
 648        return 0;
 649
 650cleanup_sdhci:
 651        platform_driver_unregister(&aspeed_sdhci_driver);
 652
 653        return rc;
 654}
 655module_init(aspeed_sdc_init);
 656
 657static void __exit aspeed_sdc_exit(void)
 658{
 659        aspeed_sdc_tests_exit();
 660
 661        platform_driver_unregister(&aspeed_sdc_driver);
 662        platform_driver_unregister(&aspeed_sdhci_driver);
 663}
 664module_exit(aspeed_sdc_exit);
 665
 666MODULE_DESCRIPTION("Driver for the ASPEED SD/SDIO/SDHCI Controllers");
 667MODULE_AUTHOR("Ryan Chen <ryan_chen@aspeedtech.com>");
 668MODULE_AUTHOR("Andrew Jeffery <andrew@aj.id.au>");
 669MODULE_LICENSE("GPL");
 670