linux/drivers/net/wireless/marvell/libertas/host.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0 */
   2/*
   3 * This file function prototypes, data structure
   4 * and  definitions for all the host/station commands
   5 */
   6
   7#ifndef _LBS_HOST_H_
   8#define _LBS_HOST_H_
   9
  10#include "types.h"
  11#include "defs.h"
  12
  13#define DEFAULT_AD_HOC_CHANNEL                  6
  14
  15#define CMD_OPTION_WAITFORRSP                   0x0002
  16
  17/* Host command IDs */
  18
  19/*
  20 * Return command are almost always the same as the host command, but with
  21 * bit 15 set high.  There are a few exceptions, though...
  22 */
  23#define CMD_RET(cmd)                            (0x8000 | cmd)
  24
  25/* Return command convention exceptions: */
  26#define CMD_RET_802_11_ASSOCIATE                0x8012
  27
  28/* Command codes */
  29#define CMD_GET_HW_SPEC                         0x0003
  30#define CMD_EEPROM_UPDATE                       0x0004
  31#define CMD_802_11_RESET                        0x0005
  32#define CMD_802_11_SCAN                         0x0006
  33#define CMD_802_11_GET_LOG                      0x000b
  34#define CMD_MAC_MULTICAST_ADR                   0x0010
  35#define CMD_802_11_AUTHENTICATE                 0x0011
  36#define CMD_802_11_EEPROM_ACCESS                0x0059
  37#define CMD_802_11_ASSOCIATE                    0x0050
  38#define CMD_802_11_SET_WEP                      0x0013
  39#define CMD_802_11_GET_STAT                     0x0014
  40#define CMD_802_3_GET_STAT                      0x0015
  41#define CMD_802_11_SNMP_MIB                     0x0016
  42#define CMD_MAC_REG_MAP                         0x0017
  43#define CMD_BBP_REG_MAP                         0x0018
  44#define CMD_MAC_REG_ACCESS                      0x0019
  45#define CMD_BBP_REG_ACCESS                      0x001a
  46#define CMD_RF_REG_ACCESS                       0x001b
  47#define CMD_802_11_RADIO_CONTROL                0x001c
  48#define CMD_802_11_RF_CHANNEL                   0x001d
  49#define CMD_802_11_RF_TX_POWER                  0x001e
  50#define CMD_802_11_RSSI                         0x001f
  51#define CMD_802_11_RF_ANTENNA                   0x0020
  52#define CMD_802_11_PS_MODE                      0x0021
  53#define CMD_802_11_DATA_RATE                    0x0022
  54#define CMD_RF_REG_MAP                          0x0023
  55#define CMD_802_11_DEAUTHENTICATE               0x0024
  56#define CMD_802_11_REASSOCIATE                  0x0025
  57#define CMD_MAC_CONTROL                         0x0028
  58#define CMD_802_11_AD_HOC_START                 0x002b
  59#define CMD_802_11_AD_HOC_JOIN                  0x002c
  60#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS       0x002e
  61#define CMD_802_11_ENABLE_RSN                   0x002f
  62#define CMD_802_11_SET_AFC                      0x003c
  63#define CMD_802_11_GET_AFC                      0x003d
  64#define CMD_802_11_DEEP_SLEEP                   0x003e
  65#define CMD_802_11_AD_HOC_STOP                  0x0040
  66#define CMD_802_11_HOST_SLEEP_CFG               0x0043
  67#define CMD_802_11_WAKEUP_CONFIRM               0x0044
  68#define CMD_802_11_HOST_SLEEP_ACTIVATE          0x0045
  69#define CMD_802_11_BEACON_STOP                  0x0049
  70#define CMD_802_11_MAC_ADDRESS                  0x004d
  71#define CMD_802_11_LED_GPIO_CTRL                0x004e
  72#define CMD_802_11_BAND_CONFIG                  0x0058
  73#define CMD_GSPI_BUS_CONFIG                     0x005a
  74#define CMD_802_11D_DOMAIN_INFO                 0x005b
  75#define CMD_802_11_KEY_MATERIAL                 0x005e
  76#define CMD_802_11_SLEEP_PARAMS                 0x0066
  77#define CMD_802_11_INACTIVITY_TIMEOUT           0x0067
  78#define CMD_802_11_SLEEP_PERIOD                 0x0068
  79#define CMD_802_11_TPC_CFG                      0x0072
  80#define CMD_802_11_PA_CFG                       0x0073
  81#define CMD_802_11_FW_WAKE_METHOD               0x0074
  82#define CMD_802_11_SUBSCRIBE_EVENT              0x0075
  83#define CMD_802_11_RATE_ADAPT_RATESET           0x0076
  84#define CMD_802_11_TX_RATE_QUERY                0x007f
  85#define CMD_GET_TSF                             0x0080
  86#define CMD_BT_ACCESS                           0x0087
  87#define CMD_FWT_ACCESS                          0x0095
  88#define CMD_802_11_MONITOR_MODE                 0x0098
  89#define CMD_MESH_ACCESS                         0x009b
  90#define CMD_MESH_CONFIG_OLD                     0x00a3
  91#define CMD_MESH_CONFIG                         0x00ac
  92#define CMD_SET_BOOT2_VER                       0x00a5
  93#define CMD_FUNC_INIT                           0x00a9
  94#define CMD_FUNC_SHUTDOWN                       0x00aa
  95#define CMD_802_11_BEACON_CTRL                  0x00b0
  96
  97/* For the IEEE Power Save */
  98#define PS_MODE_ACTION_ENTER_PS                 0x0030
  99#define PS_MODE_ACTION_EXIT_PS                  0x0031
 100#define PS_MODE_ACTION_SLEEP_CONFIRMED          0x0034
 101
 102#define CMD_ENABLE_RSN                          0x0001
 103#define CMD_DISABLE_RSN                         0x0000
 104
 105#define CMD_ACT_GET                             0x0000
 106#define CMD_ACT_SET                             0x0001
 107
 108/* Define action or option for CMD_802_11_SET_WEP */
 109#define CMD_ACT_ADD                             0x0002
 110#define CMD_ACT_REMOVE                          0x0004
 111
 112#define CMD_TYPE_WEP_40_BIT                     0x01
 113#define CMD_TYPE_WEP_104_BIT                    0x02
 114
 115#define CMD_NUM_OF_WEP_KEYS                     4
 116
 117#define CMD_WEP_KEY_INDEX_MASK                  0x3fff
 118
 119/* Define action or option for CMD_802_11_SCAN */
 120#define CMD_BSS_TYPE_BSS                        0x0001
 121#define CMD_BSS_TYPE_IBSS                       0x0002
 122#define CMD_BSS_TYPE_ANY                        0x0003
 123
 124/* Define action or option for CMD_802_11_SCAN */
 125#define CMD_SCAN_TYPE_ACTIVE                    0x0000
 126#define CMD_SCAN_TYPE_PASSIVE                   0x0001
 127
 128#define CMD_SCAN_RADIO_TYPE_BG                  0
 129
 130#define CMD_SCAN_PROBE_DELAY_TIME               0
 131
 132/* Define action or option for CMD_MAC_CONTROL */
 133#define CMD_ACT_MAC_RX_ON                       0x0001
 134#define CMD_ACT_MAC_TX_ON                       0x0002
 135#define CMD_ACT_MAC_LOOPBACK_ON                 0x0004
 136#define CMD_ACT_MAC_WEP_ENABLE                  0x0008
 137#define CMD_ACT_MAC_INT_ENABLE                  0x0010
 138#define CMD_ACT_MAC_MULTICAST_ENABLE            0x0020
 139#define CMD_ACT_MAC_BROADCAST_ENABLE            0x0040
 140#define CMD_ACT_MAC_PROMISCUOUS_ENABLE          0x0080
 141#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE        0x0100
 142#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE    0x0400
 143
 144/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
 145#define CMD_SUBSCRIBE_RSSI_LOW                  0x0001
 146#define CMD_SUBSCRIBE_SNR_LOW                   0x0002
 147#define CMD_SUBSCRIBE_FAILCOUNT                 0x0004
 148#define CMD_SUBSCRIBE_BCNMISS                   0x0008
 149#define CMD_SUBSCRIBE_RSSI_HIGH                 0x0010
 150#define CMD_SUBSCRIBE_SNR_HIGH                  0x0020
 151
 152#define RADIO_PREAMBLE_LONG                     0x00
 153#define RADIO_PREAMBLE_SHORT                    0x02
 154#define RADIO_PREAMBLE_AUTO                     0x04
 155
 156/* Define action or option for CMD_802_11_RF_CHANNEL */
 157#define CMD_OPT_802_11_RF_CHANNEL_GET           0x00
 158#define CMD_OPT_802_11_RF_CHANNEL_SET           0x01
 159
 160/* Define action or option for CMD_802_11_DATA_RATE */
 161#define CMD_ACT_SET_TX_AUTO                     0x0000
 162#define CMD_ACT_SET_TX_FIX_RATE                 0x0001
 163#define CMD_ACT_GET_TX_RATE                     0x0002
 164
 165/* Options for CMD_802_11_FW_WAKE_METHOD */
 166#define CMD_WAKE_METHOD_UNCHANGED               0x0000
 167#define CMD_WAKE_METHOD_COMMAND_INT             0x0001
 168#define CMD_WAKE_METHOD_GPIO                    0x0002
 169
 170/* Object IDs for CMD_802_11_SNMP_MIB */
 171#define SNMP_MIB_OID_BSS_TYPE                   0x0000
 172#define SNMP_MIB_OID_OP_RATE_SET                0x0001
 173#define SNMP_MIB_OID_BEACON_PERIOD              0x0002  /* Reserved on v9+ */
 174#define SNMP_MIB_OID_DTIM_PERIOD                0x0003  /* Reserved on v9+ */
 175#define SNMP_MIB_OID_ASSOC_TIMEOUT              0x0004  /* Reserved on v9+ */
 176#define SNMP_MIB_OID_RTS_THRESHOLD              0x0005
 177#define SNMP_MIB_OID_SHORT_RETRY_LIMIT          0x0006
 178#define SNMP_MIB_OID_LONG_RETRY_LIMIT           0x0007
 179#define SNMP_MIB_OID_FRAG_THRESHOLD             0x0008
 180#define SNMP_MIB_OID_11D_ENABLE                 0x0009
 181#define SNMP_MIB_OID_11H_ENABLE                 0x000A
 182
 183/* Define action or option for CMD_BT_ACCESS */
 184enum cmd_bt_access_opts {
 185        /* The bt commands start at 5 instead of 1 because the old dft commands
 186         * are mapped to 1-4.  These old commands are no longer maintained and
 187         * should not be called.
 188         */
 189        CMD_ACT_BT_ACCESS_ADD = 5,
 190        CMD_ACT_BT_ACCESS_DEL,
 191        CMD_ACT_BT_ACCESS_LIST,
 192        CMD_ACT_BT_ACCESS_RESET,
 193        CMD_ACT_BT_ACCESS_SET_INVERT,
 194        CMD_ACT_BT_ACCESS_GET_INVERT
 195};
 196
 197/* Define action or option for CMD_FWT_ACCESS */
 198enum cmd_fwt_access_opts {
 199        CMD_ACT_FWT_ACCESS_ADD = 1,
 200        CMD_ACT_FWT_ACCESS_DEL,
 201        CMD_ACT_FWT_ACCESS_LOOKUP,
 202        CMD_ACT_FWT_ACCESS_LIST,
 203        CMD_ACT_FWT_ACCESS_LIST_ROUTE,
 204        CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
 205        CMD_ACT_FWT_ACCESS_RESET,
 206        CMD_ACT_FWT_ACCESS_CLEANUP,
 207        CMD_ACT_FWT_ACCESS_TIME,
 208};
 209
 210/* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
 211enum cmd_wol_cfg_opts {
 212        CMD_ACT_ACTION_NONE = 0,
 213        CMD_ACT_SET_WOL_RULE,
 214        CMD_ACT_GET_WOL_RULE,
 215        CMD_ACT_RESET_WOL_RULE,
 216};
 217
 218/* Define action or option for CMD_MESH_ACCESS */
 219enum cmd_mesh_access_opts {
 220        CMD_ACT_MESH_GET_TTL = 1,
 221        CMD_ACT_MESH_SET_TTL,
 222        CMD_ACT_MESH_GET_STATS,
 223        CMD_ACT_MESH_GET_ANYCAST,
 224        CMD_ACT_MESH_SET_ANYCAST,
 225        CMD_ACT_MESH_SET_LINK_COSTS,
 226        CMD_ACT_MESH_GET_LINK_COSTS,
 227        CMD_ACT_MESH_SET_BCAST_RATE,
 228        CMD_ACT_MESH_GET_BCAST_RATE,
 229        CMD_ACT_MESH_SET_RREQ_DELAY,
 230        CMD_ACT_MESH_GET_RREQ_DELAY,
 231        CMD_ACT_MESH_SET_ROUTE_EXP,
 232        CMD_ACT_MESH_GET_ROUTE_EXP,
 233        CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
 234        CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
 235        CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
 236};
 237
 238/* Define actions and types for CMD_MESH_CONFIG */
 239enum cmd_mesh_config_actions {
 240        CMD_ACT_MESH_CONFIG_STOP = 0,
 241        CMD_ACT_MESH_CONFIG_START,
 242        CMD_ACT_MESH_CONFIG_SET,
 243        CMD_ACT_MESH_CONFIG_GET,
 244};
 245
 246enum cmd_mesh_config_types {
 247        CMD_TYPE_MESH_SET_BOOTFLAG = 1,
 248        CMD_TYPE_MESH_SET_BOOTTIME,
 249        CMD_TYPE_MESH_SET_DEF_CHANNEL,
 250        CMD_TYPE_MESH_SET_MESH_IE,
 251        CMD_TYPE_MESH_GET_DEFAULTS,
 252        CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
 253};
 254
 255/* Card Event definition */
 256#define MACREG_INT_CODE_TX_PPA_FREE             0
 257#define MACREG_INT_CODE_TX_DMA_DONE             1
 258#define MACREG_INT_CODE_LINK_LOST_W_SCAN        2
 259#define MACREG_INT_CODE_LINK_LOST_NO_SCAN       3
 260#define MACREG_INT_CODE_LINK_SENSED             4
 261#define MACREG_INT_CODE_CMD_FINISHED            5
 262#define MACREG_INT_CODE_MIB_CHANGED             6
 263#define MACREG_INT_CODE_INIT_DONE               7
 264#define MACREG_INT_CODE_DEAUTHENTICATED         8
 265#define MACREG_INT_CODE_DISASSOCIATED           9
 266#define MACREG_INT_CODE_PS_AWAKE                10
 267#define MACREG_INT_CODE_PS_SLEEP                11
 268#define MACREG_INT_CODE_MIC_ERR_MULTICAST       13
 269#define MACREG_INT_CODE_MIC_ERR_UNICAST         14
 270#define MACREG_INT_CODE_WM_AWAKE                15
 271#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE        16
 272#define MACREG_INT_CODE_ADHOC_BCN_LOST          17
 273#define MACREG_INT_CODE_HOST_AWAKE              18
 274#define MACREG_INT_CODE_STOP_TX                 19
 275#define MACREG_INT_CODE_START_TX                20
 276#define MACREG_INT_CODE_CHANNEL_SWITCH          21
 277#define MACREG_INT_CODE_MEASUREMENT_RDY         22
 278#define MACREG_INT_CODE_WMM_CHANGE              23
 279#define MACREG_INT_CODE_BG_SCAN_REPORT          24
 280#define MACREG_INT_CODE_RSSI_LOW                25
 281#define MACREG_INT_CODE_SNR_LOW                 26
 282#define MACREG_INT_CODE_MAX_FAIL                27
 283#define MACREG_INT_CODE_RSSI_HIGH               28
 284#define MACREG_INT_CODE_SNR_HIGH                29
 285#define MACREG_INT_CODE_MESH_AUTO_STARTED       35
 286#define MACREG_INT_CODE_FIRMWARE_READY          48
 287
 288
 289/* 802.11-related definitions */
 290
 291/* TxPD descriptor */
 292struct txpd {
 293        /* union to cope up with later FW revisions */
 294        union {
 295                /* Current Tx packet status */
 296                __le32 tx_status;
 297                struct {
 298                        /* BSS type: client, AP, etc. */
 299                        u8 bss_type;
 300                        /* BSS number */
 301                        u8 bss_num;
 302                        /* Reserved */
 303                        __le16 reserved;
 304                } bss;
 305        } u;
 306        /* Tx control */
 307        __le32 tx_control;
 308        __le32 tx_packet_location;
 309        /* Tx packet length */
 310        __le16 tx_packet_length;
 311        struct_group_attr(tx_dest_addr, __packed,
 312                /* First 2 byte of destination MAC address */
 313                u8 tx_dest_addr_high[2];
 314                /* Last 4 byte of destination MAC address */
 315                u8 tx_dest_addr_low[4];
 316        );
 317        /* Pkt Priority */
 318        u8 priority;
 319        /* Pkt Trasnit Power control */
 320        u8 powermgmt;
 321        /* Amount of time the packet has been queued (units = 2ms) */
 322        u8 pktdelay_2ms;
 323        /* reserved */
 324        u8 reserved1;
 325} __packed;
 326
 327/* RxPD Descriptor */
 328struct rxpd {
 329        /* union to cope up with later FW revisions */
 330        union {
 331                /* Current Rx packet status */
 332                __le16 status;
 333                struct {
 334                        /* BSS type: client, AP, etc. */
 335                        u8 bss_type;
 336                        /* BSS number */
 337                        u8 bss_num;
 338                } __packed bss;
 339        } __packed u;
 340
 341        /* SNR */
 342        u8 snr;
 343
 344        /* Tx control */
 345        u8 rx_control;
 346
 347        /* Pkt length */
 348        __le16 pkt_len;
 349
 350        /* Noise Floor */
 351        u8 nf;
 352
 353        /* Rx Packet Rate */
 354        u8 rx_rate;
 355
 356        /* Pkt addr */
 357        __le32 pkt_ptr;
 358
 359        /* Next Rx RxPD addr */
 360        __le32 next_rxpd_ptr;
 361
 362        /* Pkt Priority */
 363        u8 priority;
 364        u8 reserved[3];
 365} __packed;
 366
 367struct cmd_header {
 368        __le16 command;
 369        __le16 size;
 370        __le16 seqnum;
 371        __le16 result;
 372} __packed;
 373
 374/* Generic structure to hold all key types. */
 375struct enc_key {
 376        u16 len;
 377        u16 flags;  /* KEY_INFO_* from defs.h */
 378        u16 type; /* KEY_TYPE_* from defs.h */
 379        u8 key[32];
 380};
 381
 382/* lbs_offset_value */
 383struct lbs_offset_value {
 384        u32 offset;
 385        u32 value;
 386} __packed;
 387
 388#define MAX_11D_TRIPLETS        83
 389
 390struct mrvl_ie_domain_param_set {
 391        struct mrvl_ie_header header;
 392
 393        u8 country_code[IEEE80211_COUNTRY_STRING_LEN];
 394        struct ieee80211_country_ie_triplet triplet[MAX_11D_TRIPLETS];
 395} __packed;
 396
 397struct cmd_ds_802_11d_domain_info {
 398        struct cmd_header hdr;
 399
 400        __le16 action;
 401        struct mrvl_ie_domain_param_set domain;
 402} __packed;
 403
 404/*
 405 * Define data structure for CMD_GET_HW_SPEC
 406 * This structure defines the response for the GET_HW_SPEC command
 407 */
 408struct cmd_ds_get_hw_spec {
 409        struct cmd_header hdr;
 410
 411        /* HW Interface version number */
 412        __le16 hwifversion;
 413        /* HW version number */
 414        __le16 version;
 415        /* Max number of TxPD FW can handle */
 416        __le16 nr_txpd;
 417        /* Max no of Multicast address */
 418        __le16 nr_mcast_adr;
 419        /* MAC address */
 420        u8 permanentaddr[6];
 421
 422        /* region Code */
 423        __le16 regioncode;
 424
 425        /* Number of antenna used */
 426        __le16 nr_antenna;
 427
 428        /* FW release number, example 0x01030304 = 2.3.4p1 */
 429        __le32 fwrelease;
 430
 431        /* Base Address of TxPD queue */
 432        __le32 wcb_base;
 433        /* Read Pointer of RxPd queue */
 434        __le32 rxpd_rdptr;
 435
 436        /* Write Pointer of RxPd queue */
 437        __le32 rxpd_wrptr;
 438
 439        /*FW/HW capability */
 440        __le32 fwcapinfo;
 441} __packed;
 442
 443struct cmd_ds_802_11_subscribe_event {
 444        struct cmd_header hdr;
 445
 446        __le16 action;
 447        __le16 events;
 448
 449        /* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a
 450         * number of TLVs. From the v5.1 manual, those TLVs would add up to
 451         * 40 bytes. However, future firmware might add additional TLVs, so I
 452         * bump this up a bit.
 453         */
 454        uint8_t tlv[128];
 455} __packed;
 456
 457/*
 458 * This scan handle Country Information IE(802.11d compliant)
 459 * Define data structure for CMD_802_11_SCAN
 460 */
 461struct cmd_ds_802_11_scan {
 462        struct cmd_header hdr;
 463
 464        uint8_t bsstype;
 465        uint8_t bssid[ETH_ALEN];
 466        uint8_t tlvbuffer[];
 467} __packed;
 468
 469struct cmd_ds_802_11_scan_rsp {
 470        struct cmd_header hdr;
 471
 472        __le16 bssdescriptsize;
 473        uint8_t nr_sets;
 474        uint8_t bssdesc_and_tlvbuffer[];
 475} __packed;
 476
 477struct cmd_ds_802_11_get_log {
 478        struct cmd_header hdr;
 479
 480        __le32 mcasttxframe;
 481        __le32 failed;
 482        __le32 retry;
 483        __le32 multiretry;
 484        __le32 framedup;
 485        __le32 rtssuccess;
 486        __le32 rtsfailure;
 487        __le32 ackfailure;
 488        __le32 rxfrag;
 489        __le32 mcastrxframe;
 490        __le32 fcserror;
 491        __le32 txframe;
 492        __le32 wepundecryptable;
 493} __packed;
 494
 495struct cmd_ds_mac_control {
 496        struct cmd_header hdr;
 497        __le16 action;
 498        u16 reserved;
 499} __packed;
 500
 501struct cmd_ds_mac_multicast_adr {
 502        struct cmd_header hdr;
 503        __le16 action;
 504        __le16 nr_of_adrs;
 505        u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
 506} __packed;
 507
 508struct cmd_ds_802_11_authenticate {
 509        struct cmd_header hdr;
 510
 511        u8 bssid[ETH_ALEN];
 512        u8 authtype;
 513        u8 reserved[10];
 514} __packed;
 515
 516struct cmd_ds_802_11_deauthenticate {
 517        struct cmd_header hdr;
 518
 519        u8 macaddr[ETH_ALEN];
 520        __le16 reasoncode;
 521} __packed;
 522
 523struct cmd_ds_802_11_associate {
 524        struct cmd_header hdr;
 525
 526        u8 bssid[6];
 527        __le16 capability;
 528        __le16 listeninterval;
 529        __le16 bcnperiod;
 530        u8 dtimperiod;
 531        /* 512 permitted - enough for required and most optional IEs */
 532        u8 iebuf[];
 533} __packed;
 534
 535struct cmd_ds_802_11_associate_response {
 536        struct cmd_header hdr;
 537
 538        __le16 capability;
 539        __le16 statuscode;
 540        __le16 aid;
 541        /* max 512 */
 542        u8 iebuf[];
 543} __packed;
 544
 545struct cmd_ds_802_11_set_wep {
 546        struct cmd_header hdr;
 547
 548        /* ACT_ADD, ACT_REMOVE or ACT_ENABLE */
 549        __le16 action;
 550
 551        /* key Index selected for Tx */
 552        __le16 keyindex;
 553
 554        /* 40, 128bit or TXWEP */
 555        uint8_t keytype[4];
 556        uint8_t keymaterial[4][16];
 557} __packed;
 558
 559struct cmd_ds_802_11_snmp_mib {
 560        struct cmd_header hdr;
 561
 562        __le16 action;
 563        __le16 oid;
 564        __le16 bufsize;
 565        u8 value[128];
 566} __packed;
 567
 568struct cmd_ds_reg_access {
 569        struct cmd_header hdr;
 570
 571        __le16 action;
 572        __le16 offset;
 573        union {
 574                u8 bbp_rf;  /* for BBP and RF registers */
 575                __le32 mac; /* for MAC registers */
 576        } value;
 577} __packed;
 578
 579struct cmd_ds_802_11_radio_control {
 580        struct cmd_header hdr;
 581
 582        __le16 action;
 583        __le16 control;
 584} __packed;
 585
 586struct cmd_ds_802_11_beacon_control {
 587        struct cmd_header hdr;
 588
 589        __le16 action;
 590        __le16 beacon_enable;
 591        __le16 beacon_period;
 592} __packed;
 593
 594struct cmd_ds_802_11_sleep_params {
 595        struct cmd_header hdr;
 596
 597        /* ACT_GET/ACT_SET */
 598        __le16 action;
 599
 600        /* Sleep clock error in ppm */
 601        __le16 error;
 602
 603        /* Wakeup offset in usec */
 604        __le16 offset;
 605
 606        /* Clock stabilization time in usec */
 607        __le16 stabletime;
 608
 609        /* control periodic calibration */
 610        uint8_t calcontrol;
 611
 612        /* control the use of external sleep clock */
 613        uint8_t externalsleepclk;
 614
 615        /* reserved field, should be set to zero */
 616        __le16 reserved;
 617} __packed;
 618
 619struct cmd_ds_802_11_rf_channel {
 620        struct cmd_header hdr;
 621
 622        __le16 action;
 623        __le16 channel;
 624        __le16 rftype;      /* unused */
 625        __le16 reserved;    /* unused */
 626        u8 channellist[32]; /* unused */
 627} __packed;
 628
 629struct cmd_ds_802_11_rssi {
 630        struct cmd_header hdr;
 631
 632        /*
 633         * request:  number of beacons (N) to average the SNR and NF over
 634         * response: SNR of most recent beacon
 635         */
 636        __le16 n_or_snr;
 637
 638        /*
 639         * The following fields are only set in the response.
 640         * In the request these are reserved and should be set to 0.
 641         */
 642        __le16 nf;       /* most recent beacon noise floor */
 643        __le16 avg_snr;  /* average SNR weighted by N from request */
 644        __le16 avg_nf;   /* average noise floor weighted by N from request */
 645} __packed;
 646
 647struct cmd_ds_802_11_mac_address {
 648        struct cmd_header hdr;
 649
 650        __le16 action;
 651        u8 macadd[ETH_ALEN];
 652} __packed;
 653
 654struct cmd_ds_802_11_rf_tx_power {
 655        struct cmd_header hdr;
 656
 657        __le16 action;
 658        __le16 curlevel;
 659        s8 maxlevel;
 660        s8 minlevel;
 661} __packed;
 662
 663/* MONITOR_MODE only exists in OLPC v5 firmware */
 664struct cmd_ds_802_11_monitor_mode {
 665        struct cmd_header hdr;
 666
 667        __le16 action;
 668        __le16 mode;
 669} __packed;
 670
 671struct cmd_ds_set_boot2_ver {
 672        struct cmd_header hdr;
 673
 674        __le16 action;
 675        __le16 version;
 676} __packed;
 677
 678struct cmd_ds_802_11_fw_wake_method {
 679        struct cmd_header hdr;
 680
 681        __le16 action;
 682        __le16 method;
 683} __packed;
 684
 685struct cmd_ds_802_11_ps_mode {
 686        struct cmd_header hdr;
 687
 688        __le16 action;
 689
 690        /*
 691         * Interval for keepalive in PS mode:
 692         * 0x0000 = don't change
 693         * 0x001E = firmware default
 694         * 0xFFFF = disable
 695         */
 696        __le16 nullpktinterval;
 697
 698        /*
 699         * Number of DTIM intervals to wake up for:
 700         * 0 = don't change
 701         * 1 = firmware default
 702         * 5 = max
 703         */
 704        __le16 multipledtim;
 705
 706        __le16 reserved;
 707        __le16 locallisteninterval;
 708
 709        /*
 710         * AdHoc awake period (FW v9+ only):
 711         * 0 = don't change
 712         * 1 = always awake (IEEE standard behavior)
 713         * 2 - 31 = sleep for (n - 1) periods and awake for 1 period
 714         * 32 - 254 = invalid
 715         * 255 = sleep at each ATIM
 716         */
 717        __le16 adhoc_awake_period;
 718} __packed;
 719
 720struct cmd_confirm_sleep {
 721        struct cmd_header hdr;
 722
 723        __le16 action;
 724        __le16 nullpktinterval;
 725        __le16 multipledtim;
 726        __le16 reserved;
 727        __le16 locallisteninterval;
 728} __packed;
 729
 730struct cmd_ds_802_11_data_rate {
 731        struct cmd_header hdr;
 732
 733        __le16 action;
 734        __le16 reserved;
 735        u8 rates[MAX_RATES];
 736} __packed;
 737
 738struct cmd_ds_802_11_rate_adapt_rateset {
 739        struct cmd_header hdr;
 740        __le16 action;
 741        __le16 enablehwauto;
 742        __le16 bitmap;
 743} __packed;
 744
 745struct cmd_ds_802_11_ad_hoc_start {
 746        struct cmd_header hdr;
 747
 748        u8 ssid[IEEE80211_MAX_SSID_LEN];
 749        u8 bsstype;
 750        __le16 beaconperiod;
 751        u8 dtimperiod;   /* Reserved on v9 and later */
 752        struct ieee_ie_ibss_param_set ibss;
 753        u8 reserved1[4];
 754        struct ieee_ie_ds_param_set ds;
 755        u8 reserved2[4];
 756        __le16 probedelay;  /* Reserved on v9 and later */
 757        __le16 capability;
 758        u8 rates[MAX_RATES];
 759        u8 tlv_memory_size_pad[100];
 760} __packed;
 761
 762struct cmd_ds_802_11_ad_hoc_result {
 763        struct cmd_header hdr;
 764
 765        u8 pad[3];
 766        u8 bssid[ETH_ALEN];
 767} __packed;
 768
 769struct adhoc_bssdesc {
 770        u8 bssid[ETH_ALEN];
 771        u8 ssid[IEEE80211_MAX_SSID_LEN];
 772        u8 type;
 773        __le16 beaconperiod;
 774        u8 dtimperiod;
 775        __le64 timestamp;
 776        __le64 localtime;
 777        struct ieee_ie_ds_param_set ds;
 778        u8 reserved1[4];
 779        struct ieee_ie_ibss_param_set ibss;
 780        u8 reserved2[4];
 781        __le16 capability;
 782        u8 rates[MAX_RATES];
 783
 784        /*
 785         * DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
 786         * Adhoc join command and will cause a binary layout mismatch with
 787         * the firmware
 788         */
 789} __packed;
 790
 791struct cmd_ds_802_11_ad_hoc_join {
 792        struct cmd_header hdr;
 793
 794        struct adhoc_bssdesc bss;
 795        __le16 failtimeout;   /* Reserved on v9 and later */
 796        __le16 probedelay;    /* Reserved on v9 and later */
 797} __packed;
 798
 799struct cmd_ds_802_11_ad_hoc_stop {
 800        struct cmd_header hdr;
 801} __packed;
 802
 803struct cmd_ds_802_11_enable_rsn {
 804        struct cmd_header hdr;
 805
 806        __le16 action;
 807        __le16 enable;
 808} __packed;
 809
 810struct MrvlIEtype_keyParamSet {
 811        /* type ID */
 812        __le16 type;
 813
 814        /* length of Payload */
 815        __le16 length;
 816
 817        /* type of key: WEP=0, TKIP=1, AES=2 */
 818        __le16 keytypeid;
 819
 820        /* key control Info specific to a keytypeid */
 821        __le16 keyinfo;
 822
 823        /* length of key */
 824        __le16 keylen;
 825
 826        /* key material of size keylen */
 827        u8 key[32];
 828} __packed;
 829
 830#define MAX_WOL_RULES           16
 831
 832struct host_wol_rule {
 833        uint8_t rule_no;
 834        uint8_t rule_ops;
 835        __le16 sig_offset;
 836        __le16 sig_length;
 837        __le16 reserve;
 838        __be32 sig_mask;
 839        __be32 signature;
 840} __packed;
 841
 842struct wol_config {
 843        uint8_t action;
 844        uint8_t pattern;
 845        uint8_t no_rules_in_cmd;
 846        uint8_t result;
 847        struct host_wol_rule rule[MAX_WOL_RULES];
 848} __packed;
 849
 850struct cmd_ds_host_sleep {
 851        struct cmd_header hdr;
 852        __le32 criteria;
 853        uint8_t gpio;
 854        uint16_t gap;
 855        struct wol_config wol_conf;
 856} __packed;
 857
 858
 859
 860struct cmd_ds_802_11_key_material {
 861        struct cmd_header hdr;
 862
 863        __le16 action;
 864        struct MrvlIEtype_keyParamSet keyParamSet[2];
 865} __packed;
 866
 867struct cmd_ds_802_11_eeprom_access {
 868        struct cmd_header hdr;
 869        __le16 action;
 870        __le16 offset;
 871        __le16 len;
 872        /* firmware says it returns a maximum of 20 bytes */
 873#define LBS_EEPROM_READ_LEN 20
 874        u8 value[LBS_EEPROM_READ_LEN];
 875} __packed;
 876
 877struct cmd_ds_802_11_tpc_cfg {
 878        struct cmd_header hdr;
 879
 880        __le16 action;
 881        uint8_t enable;
 882        int8_t P0;
 883        int8_t P1;
 884        int8_t P2;
 885        uint8_t usesnr;
 886} __packed;
 887
 888
 889struct cmd_ds_802_11_pa_cfg {
 890        struct cmd_header hdr;
 891
 892        __le16 action;
 893        uint8_t enable;
 894        int8_t P0;
 895        int8_t P1;
 896        int8_t P2;
 897} __packed;
 898
 899
 900struct cmd_ds_802_11_led_ctrl {
 901        struct cmd_header hdr;
 902
 903        __le16 action;
 904        __le16 numled;
 905        u8 data[256];
 906} __packed;
 907
 908/* Automatic Frequency Control */
 909struct cmd_ds_802_11_afc {
 910        struct cmd_header hdr;
 911
 912        __le16 afc_auto;
 913        union {
 914                struct {
 915                        __le16 threshold;
 916                        __le16 period;
 917                };
 918                struct {
 919                        __le16 timing_offset; /* signed */
 920                        __le16 carrier_offset; /* signed */
 921                };
 922        };
 923} __packed;
 924
 925struct cmd_tx_rate_query {
 926        __le16 txrate;
 927} __packed;
 928
 929struct cmd_ds_get_tsf {
 930        __le64 tsfvalue;
 931} __packed;
 932
 933struct cmd_ds_bt_access {
 934        struct cmd_header hdr;
 935
 936        __le16 action;
 937        __le32 id;
 938        u8 addr1[ETH_ALEN];
 939        u8 addr2[ETH_ALEN];
 940} __packed;
 941
 942struct cmd_ds_fwt_access {
 943        struct cmd_header hdr;
 944
 945        __le16 action;
 946        __le32 id;
 947        u8 valid;
 948        u8 da[ETH_ALEN];
 949        u8 dir;
 950        u8 ra[ETH_ALEN];
 951        __le32 ssn;
 952        __le32 dsn;
 953        __le32 metric;
 954        u8 rate;
 955        u8 hopcount;
 956        u8 ttl;
 957        __le32 expiration;
 958        u8 sleepmode;
 959        __le32 snr;
 960        __le32 references;
 961        u8 prec[ETH_ALEN];
 962} __packed;
 963
 964struct cmd_ds_mesh_config {
 965        struct cmd_header hdr;
 966
 967        __le16 action;
 968        __le16 channel;
 969        __le16 type;
 970        __le16 length;
 971        u8 data[128];   /* last position reserved */
 972} __packed;
 973
 974struct cmd_ds_mesh_access {
 975        struct cmd_header hdr;
 976
 977        __le16 action;
 978        __le32 data[32];        /* last position reserved */
 979} __packed;
 980
 981/* Number of stats counters returned by the firmware */
 982#define MESH_STATS_NUM 8
 983#endif
 984