// SPDX-License-Identifier: GPL-2.0-or-later
/*
        Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
        <http://rt2x00.serialmonkey.com>

 */

/*
        Module: rt61pci
        Abstract: rt61pci device specific routines.
        Supported chipsets: RT2561, RT2561s, RT2661.
 */

#include <linux/crc-itu-t.h>
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/eeprom_93cx6.h>

#include "rt2x00.h"
#include "rt2x00mmio.h"
#include "rt2x00pci.h"
#include "rt61pci.h"

/*
 * Allow hardware encryption to be disabled.
 */
static bool modparam_nohwcrypt = false;
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, 0444);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");

/*
 * Register access.
 * BBP and RF register require indirect register access,
 * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this.
 * These indirect registers work with busy bits,
 * and we will try maximal REGISTER_BUSY_COUNT times to access
 * the register while taking a REGISTER_BUSY_DELAY us delay
 * between each attempt. When the busy bit is still set at that time,
 * the access attempt is considered to have failed,
 * and we will print an error.
 */
#define WAIT_FOR_BBP(__dev, __reg) \
        rt2x00mmio_regbusy_read((__dev), PHY_CSR3, PHY_CSR3_BUSY, (__reg))
#define WAIT_FOR_RF(__dev, __reg) \
        rt2x00mmio_regbusy_read((__dev), PHY_CSR4, PHY_CSR4_BUSY, (__reg))
#define WAIT_FOR_MCU(__dev, __reg) \
        rt2x00mmio_regbusy_read((__dev), H2M_MAILBOX_CSR, \
                                H2M_MAILBOX_CSR_OWNER, (__reg))

static void rt61pci_bbp_write(struct rt2x00_dev *rt2x00dev,
                              const unsigned int word, const u8 value)
{
        u32 reg;

        mutex_lock(&rt2x00dev->csr_mutex);

        /*
         * Wait until the BBP becomes available, afterwards we
         * can safely write the new data into the register.
         */
        if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
                reg = 0;
                rt2x00_set_field32(&reg, PHY_CSR3_VALUE, value);
                rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
                rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
                rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 0);

                rt2x00mmio_register_write(rt2x00dev, PHY_CSR3, reg);
        }

        mutex_unlock(&rt2x00dev->csr_mutex);
}

static u8 rt61pci_bbp_read(struct rt2x00_dev *rt2x00dev,
                           const unsigned int word)
{
        u32 reg;
        u8 value;

        mutex_lock(&rt2x00dev->csr_mutex);

        /*
         * Wait until the BBP becomes available, afterwards we
         * can safely write the read request into the register.
         * After the data has been written, we wait until hardware
         * returns the correct value, if at any time the register
         * doesn't become available in time, reg will be 0xffffffff
         * which means we return 0xff to the caller.
         */
        if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
                reg = 0;
                rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
                rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
                rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 1);

                rt2x00mmio_register_write(rt2x00dev, PHY_CSR3, reg);

                WAIT_FOR_BBP(rt2x00dev, &reg);
        }

        value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);

        mutex_unlock(&rt2x00dev->csr_mutex);

        return value;
}

static void rt61pci_rf_write(struct rt2x00_dev *rt2x00dev,
                             const unsigned int word, const u32 value)
{
        u32 reg;

        mutex_lock(&rt2x00dev->csr_mutex);

        /*
         * Wait until the RF becomes available, afterwards we
         * can safely write the new data into the register.
         */
        if (WAIT_FOR_RF(rt2x00dev, &reg)) {
                reg = 0;
                rt2x00_set_field32(&reg, PHY_CSR4_VALUE, value);
                rt2x00_set_field32(&reg, PHY_CSR4_NUMBER_OF_BITS, 21);
                rt2x00_set_field32(&reg, PHY_CSR4_IF_SELECT, 0);
                rt2x00_set_field32(&reg, PHY_CSR4_BUSY, 1);

                rt2x00mmio_register_write(rt2x00dev, PHY_CSR4, reg);
                rt2x00_rf_write(rt2x00dev, word, value);
        }

        mutex_unlock(&rt2x00dev->csr_mutex);
}

static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev,
                                const u8 command, const u8 token,
                                const u8 arg0, const u8 arg1)
{
        u32 reg;

        mutex_lock(&rt2x00dev->csr_mutex);

        /*
         * Wait until the MCU becomes available, afterwards we
         * can safely write the new data into the register.
         */
        if (WAIT_FOR_MCU(rt2x00dev, &reg)) {
                rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
                rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
                rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
                rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
                rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg);

                reg = rt2x00mmio_register_read(rt2x00dev, HOST_CMD_CSR);
                rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
                rt2x00_set_field32(&reg, HOST_CMD_CSR_INTERRUPT_MCU, 1);
                rt2x00mmio_register_write(rt2x00dev, HOST_CMD_CSR, reg);
        }

        mutex_unlock(&rt2x00dev->csr_mutex);

}

static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
{
        struct rt2x00_dev *rt2x00dev = eeprom->data;
        u32 reg;

        reg = rt2x00mmio_register_read(rt2x00dev, E2PROM_CSR);

        eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN);
        eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT);
        eeprom->reg_data_clock =
            !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK);
        eeprom->reg_chip_select =
            !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT);
}

static void rt61pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
{
        struct rt2x00_dev *rt2x00dev = eeprom->data;
        u32 reg = 0;

        rt2x00_set_field32(&reg, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in);
        rt2x00_set_field32(&reg, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out);
        rt2x00_set_field32(&reg, E2PROM_CSR_DATA_CLOCK,
                           !!eeprom->reg_data_clock);
        rt2x00_set_field32(&reg, E2PROM_CSR_CHIP_SELECT,
                           !!eeprom->reg_chip_select);

        rt2x00mmio_register_write(rt2x00dev, E2PROM_CSR, reg);
}

#ifdef CONFIG_RT2X00_LIB_DEBUGFS
static const struct rt2x00debug rt61pci_rt2x00debug = {
        .owner  = THIS_MODULE,
        .csr    = {
                .read           = rt2x00mmio_register_read,
                .write          = rt2x00mmio_register_write,
                .flags          = RT2X00DEBUGFS_OFFSET,
                .word_base      = CSR_REG_BASE,
                .word_size      = sizeof(u32),
                .word_count     = CSR_REG_SIZE / sizeof(u32),
        },
        .eeprom = {
                .read           = rt2x00_eeprom_read,
                .write          = rt2x00_eeprom_write,
                .word_base      = EEPROM_BASE,
                .word_size      = sizeof(u16),
                .word_count     = EEPROM_SIZE / sizeof(u16),
        },
        .bbp    = {
                .read           = rt61pci_bbp_read,
                .write          = rt61pci_bbp_write,
                .word_base      = BBP_BASE,
                .word_size      = sizeof(u8),
                .word_count     = BBP_SIZE / sizeof(u8),
        },
        .rf     = {
                .read           = rt2x00_rf_read,
                .write          = rt61pci_rf_write,
                .word_base      = RF_BASE,
                .word_size      = sizeof(u32),
                .word_count     = RF_SIZE / sizeof(u32),
        },
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */

static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
        u32 reg;

        reg = rt2x00mmio_register_read(rt2x00dev, MAC_CSR13);
        return rt2x00_get_field32(reg, MAC_CSR13_VAL5);
}

#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt61pci_brightness_set(struct led_classdev *led_cdev,
                                   enum led_brightness brightness)
{
        struct rt2x00_led *led =
            container_of(led_cdev, struct rt2x00_led, led_dev);
        unsigned int enabled = brightness != LED_OFF;
        unsigned int a_mode =
            (enabled && led->rt2x00dev->curr_band == NL80211_BAND_5GHZ);
        unsigned int bg_mode =
            (enabled && led->rt2x00dev->curr_band == NL80211_BAND_2GHZ);

        if (led->type == LED_TYPE_RADIO) {
                rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
                                   MCU_LEDCS_RADIO_STATUS, enabled);

                rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff,
                                    (led->rt2x00dev->led_mcu_reg & 0xff),
                                    ((led->rt2x00dev->led_mcu_reg >> 8)));
        } else if (led->type == LED_TYPE_ASSOC) {
                rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
                                   MCU_LEDCS_LINK_BG_STATUS, bg_mode);
                rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
                                   MCU_LEDCS_LINK_A_STATUS, a_mode);

                rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff,
                                    (led->rt2x00dev->led_mcu_reg & 0xff),
                                    ((led->rt2x00dev->led_mcu_reg >> 8)));
        } else if (led->type == LED_TYPE_QUALITY) {
                /*
                 * The brightness is divided into 6 levels (0 - 5),
                 * this means we need to convert the brightness
                 * argument into the matching level within that range.
                 */
                rt61pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
                                    brightness / (LED_FULL / 6), 0);
        }
}

static int rt61pci_blink_set(struct led_classdev *led_cdev,
                             unsigned long *delay_on,
                             unsigned long *delay_off)
{
        struct rt2x00_led *led =
            container_of(led_cdev, struct rt2x00_led, led_dev);
        u32 reg;

        reg = rt2x00mmio_register_read(led->rt2x00dev, MAC_CSR14);
        rt2x00_set_field32(&reg, MAC_CSR14_ON_PERIOD, *delay_on);
        rt2x00_set_field32(&reg, MAC_CSR14_OFF_PERIOD, *delay_off);
        rt2x00mmio_register_write(led->rt2x00dev, MAC_CSR14, reg);

        return 0;
}

static void rt61pci_init_led(struct rt2x00_dev *rt2x00dev,
                             struct rt2x00_led *led,
                             enum led_type type)
{
        led->rt2x00dev = rt2x00dev;
        led->type = type;
        led->led_dev.brightness_set = rt61pci_brightness_set;
        led->led_dev.blink_set = rt61pci_blink_set;
        led->flags = LED_INITIALIZED;
}
#endif /* CONFIG_RT2X00_LIB_LEDS */

/*
 * Configuration handlers.
 */
static int rt61pci_config_shared_key(struct rt2x00_dev *rt2x00dev,
                                     struct rt2x00lib_crypto *crypto,
                                     struct ieee80211_key_conf *key)
{
        /*
         * Let the software handle the shared keys,
         * since the hardware decryption does not work reliably,
         * because the firmware does not know the key's keyidx.
         */
        return -EOPNOTSUPP;
}

static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
                                       struct rt2x00lib_crypto *crypto,
                                       struct ieee80211_key_conf *key)
{
        struct hw_pairwise_ta_entry addr_entry;
        struct hw_key_entry key_entry;
        u32 mask;
        u32 reg;

        if (crypto->cmd == SET_KEY) {
                /*
                 * rt2x00lib can't determine the correct free
                 * key_idx for pairwise keys. We have 2 registers
                 * with key valid bits. The goal is simple: read
                 * the first register. If that is full, move to
                 * the next register.
                 * When both registers are full, we drop the key.
                 * Otherwise, we use the first invalid entry.
                 */
                reg = rt2x00mmio_register_read(rt2x00dev, SEC_CSR2);
                if (reg && reg == ~0) {
                        key->hw_key_idx = 32;
                        reg = rt2x00mmio_register_read(rt2x00dev, SEC_CSR3);
                        if (reg && reg == ~0)
                                return -ENOSPC;
                }

                key->hw_key_idx += reg ? ffz(reg) : 0;

                /*
                 * Upload key to hardware
                 */
                memcpy(key_entry.key, crypto->key,
                       sizeof(key_entry.key));
                memcpy(key_entry.tx_mic, crypto->tx_mic,
                       sizeof(key_entry.tx_mic));
                memcpy(key_entry.rx_mic, crypto->rx_mic,
                       sizeof(key_entry.rx_mic));

                memset(&addr_entry, 0, sizeof(addr_entry));
                memcpy(&addr_entry, crypto->address, ETH_ALEN);
                addr_entry.cipher = crypto->cipher;

                reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
                rt2x00mmio_register_multiwrite(rt2x00dev, reg,
                                               &key_entry, sizeof(key_entry));

                reg = PAIRWISE_TA_ENTRY(key->hw_key_idx);
                rt2x00mmio_register_multiwrite(rt2x00dev, reg,
                                               &addr_entry, sizeof(addr_entry));

                /*
                 * Enable pairwise lookup table for given BSS idx.
                 * Without this, received frames will not be decrypted
                 * by the hardware.
                 */
                reg = rt2x00mmio_register_read(rt2x00dev, SEC_CSR4);
                reg |= (1 << crypto->bssidx);
                rt2x00mmio_register_write(rt2x00dev, SEC_CSR4, reg);

                /*
                 * The driver does not support the IV/EIV generation
                 * in hardware. However it doesn't support the IV/EIV
                 * inside the ieee80211 frame either, but requires it
                 * to be provided separately for the descriptor.
                 * rt2x00lib will cut the IV/EIV data out of all frames
                 * given to us by mac80211, but we must tell mac80211
                 * to generate the IV/EIV data.
                 */
                key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
        }

        /*
         * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate
         * a particular key is valid. Because using the FIELD32()
         * defines directly will cause a lot of overhead, we use
         * a calculation to determine the correct bit directly.
         */
        if (key->hw_key_idx < 32) {
                mask = 1 << key->hw_key_idx;

                reg = rt2x00mmio_register_read(rt2x00dev, SEC_CSR2);
                if (crypto->cmd == SET_KEY)
                        reg |= mask;
                else if (crypto->cmd == DISABLE_KEY)
                        reg &= ~mask;
                rt2x00mmio_register_write(rt2x00dev, SEC_CSR2, reg);
        } else {
                mask = 1 << (key->hw_key_idx - 32);

                reg = rt2x00mmio_register_read(rt2x00dev, SEC_CSR3);
                if (crypto->cmd == SET_KEY)
                        reg |= mask;
                else if (crypto->cmd == DISABLE_KEY)
                        reg &= ~mask;
                rt2x00mmio_register_write(rt2x00dev, SEC_CSR3, reg);
        }

        return 0;
}

static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev,
                                  const unsigned int filter_flags)
{
        u32 reg;

        /*
         * Start configuration steps.
         * Note that the version error will always be dropped
         * and broadcast frames will always be accepted since
         * there is no filter for it at this time.
         */
        reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR0);
        rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC,
                           !(filter_flags & FIF_FCSFAIL));
        rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL,
                           !(filter_flags & FIF_PLCPFAIL));
        rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL,
                           !(filter_flags & (FIF_CONTROL | FIF_PSPOLL)));
        rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME,
                           !test_bit(CONFIG_MONITORING, &rt2x00dev->flags));
        rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS,
                           !test_bit(CONFIG_MONITORING, &rt2x00dev->flags) &&
                           !rt2x00dev->intf_ap_count);
        rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
        rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST,
                           !(filter_flags & FIF_ALLMULTI));
        rt2x00_set_field32(&reg, TXRX_CSR0_DROP_BROADCAST, 0);
        rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS,
                           !(filter_flags & FIF_CONTROL));
        rt2x00mmio_register_write(rt2x00dev, TXRX_CSR0, reg);
}

static void rt61pci_config_intf(struct rt2x00_dev *rt2x00dev,
                                struct rt2x00_intf *intf,
                                struct rt2x00intf_conf *conf,
                                const unsigned int flags)
{
        u32 reg;

        if (flags & CONFIG_UPDATE_TYPE) {
                /*
                 * Enable synchronisation.
                 */
                reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR9);
                rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, conf->sync);
                rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, reg);
        }

        if (flags & CONFIG_UPDATE_MAC) {
                reg = le32_to_cpu(conf->mac[1]);
                rt2x00_set_field32(&reg, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
                conf->mac[1] = cpu_to_le32(reg);

                rt2x00mmio_register_multiwrite(rt2x00dev, MAC_CSR2,
                                               conf->mac, sizeof(conf->mac));
        }

        if (flags & CONFIG_UPDATE_BSSID) {
                reg = le32_to_cpu(conf->bssid[1]);
                rt2x00_set_field32(&reg, MAC_CSR5_BSS_ID_MASK, 3);
                conf->bssid[1] = cpu_to_le32(reg);

                rt2x00mmio_register_multiwrite(rt2x00dev, MAC_CSR4,
                                               conf->bssid,
                                               sizeof(conf->bssid));
        }
}

static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev,
                               struct rt2x00lib_erp *erp,
                               u32 changed)
{
        u32 reg;

        reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR0);
        rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, 0x32);
        rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
        rt2x00mmio_register_write(rt2x00dev, TXRX_CSR0, reg);

        if (changed & BSS_CHANGED_ERP_PREAMBLE) {
                reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR4);
                rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
                rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE,
                                   !!erp->short_preamble);
                rt2x00mmio_register_write(rt2x00dev, TXRX_CSR4, reg);
        }

        if (changed & BSS_CHANGED_BASIC_RATES)
                rt2x00mmio_register_write(rt2x00dev, TXRX_CSR5,
                                          erp->basic_rates);

        if (changed & BSS_CHANGED_BEACON_INT) {
                reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR9);
                rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL,
                                   erp->beacon_int * 16);
                rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, reg);
        }

        if (changed & BSS_CHANGED_ERP_SLOT) {
                reg = rt2x00mmio_register_read(rt2x00dev, MAC_CSR9);
                rt2x00_set_field32(&reg, MAC_CSR9_SLOT_TIME, erp->slot_time);
                rt2x00mmio_register_write(rt2x00dev, MAC_CSR9, reg);

                reg = rt2x00mmio_register_read(rt2x00dev, MAC_CSR8);
                rt2x00_set_field32(&reg, MAC_CSR8_SIFS, erp->sifs);
                rt2x00_set_field32(&reg, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3);
                rt2x00_set_field32(&reg, MAC_CSR8_EIFS, erp->eifs);
                rt2x00mmio_register_write(rt2x00dev, MAC_CSR8, reg);
        }
}

static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
                                      struct antenna_setup *ant)
{
        u8 r3;
        u8 r4;
        u8 r77;

        r3 = rt61pci_bbp_read(rt2x00dev, 3);
        r4 = rt61pci_bbp_read(rt2x00dev, 4);
        r77 = rt61pci_bbp_read(rt2x00dev, 77);

        rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, rt2x00_rf(rt2x00dev, RF5325));

        /*
         * Configure the RX antenna.
         */
        switch (ant->rx) {
        case ANTENNA_HW_DIVERSITY:
                rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
                rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
                                  (rt2x00dev->curr_band != NL80211_BAND_5GHZ));
                break;
        case ANTENNA_A:
                rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
                rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
                if (rt2x00dev->curr_band == NL80211_BAND_5GHZ)
                        rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
                else
                        rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
                break;
        case ANTENNA_B:
        default:
                rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
                rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
                if (rt2x00dev->curr_band == NL80211_BAND_5GHZ)
                        rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
                else
                        rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
                break;
        }

        rt61pci_bbp_write(rt2x00dev, 77, r77);
        rt61pci_bbp_write(rt2x00dev, 3, r3);
        rt61pci_bbp_write(rt2x00dev, 4, r4);
}

static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
                                      struct antenna_setup *ant)
{
        u8 r3;
        u8 r4;
        u8 r77;

        r3 = rt61pci_bbp_read(rt2x00dev, 3);
        r4 = rt61pci_bbp_read(rt2x00dev, 4);
        r77 = rt61pci_bbp_read(rt2x00dev, 77);

        rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, rt2x00_rf(rt2x00dev, RF2529));
        rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
                          !rt2x00_has_cap_frame_type(rt2x00dev));

        /*
         * Configure the RX antenna.
         */
        switch (ant->rx) {
        case ANTENNA_HW_DIVERSITY:
                rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
                break;
        case ANTENNA_A:
                rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
                rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
                break;
        case ANTENNA_B:
        default:
                rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
                rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
                break;
        }

        rt61pci_bbp_write(rt2x00dev, 77, r77);
        rt61pci_bbp_write(rt2x00dev, 3, r3);
        rt61pci_bbp_write(rt2x00dev, 4, r4);
}

static void rt61pci_config_antenna_2529_rx(struct rt2x00_dev *rt2x00dev,
                                           const int p1, const int p2)
{
        u32 reg;

        reg = rt2x00mmio_register_read(rt2x00dev, MAC_CSR13);

        rt2x00_set_field32(&reg, MAC_CSR13_DIR4, 0);
        rt2x00_set_field32(&reg, MAC_CSR13_VAL4, p1);

        rt2x00_set_field32(&reg, MAC_CSR13_DIR3, 0);
        rt2x00_set_field32(&reg, MAC_CSR13_VAL3, !p2);

        rt2x00mmio_register_write(rt2x00dev, MAC_CSR13, reg);
}

static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev,
                                        struct antenna_setup *ant)
{
        u8 r3;
        u8 r4;
        u8 r77;

        r3 = rt61pci_bbp_read(rt2x00dev, 3);
        r4 = rt61pci_bbp_read(rt2x00dev, 4);
        r77 = rt61pci_bbp_read(rt2x00dev, 77);

        /*
         * Configure the RX antenna.
         */
        switch (ant->rx) {
        case ANTENNA_A:
                rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
                rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
                rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0);
                break;
        case ANTENNA_HW_DIVERSITY:
                /*
                 * FIXME: Antenna selection for the rf 2529 is very confusing
                 * in the legacy driver. Just default to antenna B until the
                 * legacy code can be properly translated into rt2x00 code.
                 */
        case ANTENNA_B:
        default:
                rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
                rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
                rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1);
                break;
        }

        rt61pci_bbp_write(rt2x00dev, 77, r77);
        rt61pci_bbp_write(rt2x00dev, 3, r3);
        rt61pci_bbp_write(rt2x00dev, 4, r4);
}

struct antenna_sel {
        u8 word;
        /*
         * value[0] -> non-LNA
         * value[1] -> LNA
         */
        u8 value[2];
};

static const struct antenna_sel antenna_sel_a[] = {
        { 96,  { 0x58, 0x78 } },
        { 104, { 0x38, 0x48 } },
        { 75,  { 0xfe, 0x80 } },
        { 86,  { 0xfe, 0x80 } },
        { 88,  { 0xfe, 0x80 } },
        { 35,  { 0x60, 0x60 } },
        { 97,  { 0x58, 0x58 } },
        { 98,  { 0x58, 0x58 } },
};

static const struct antenna_sel antenna_sel_bg[] = {
        { 96,  { 0x48, 0x68 } },
        { 104, { 0x2c, 0x3c } },
        { 75,  { 0xfe, 0x80 } },
        { 86,  { 0xfe, 0x80 } },
        { 88,  { 0xfe, 0x80 } },
        { 35,  { 0x50, 0x50 } },
        { 97,  { 0x48, 0x48 } },
        { 98,  { 0x48, 0x48 } },
};

static void rt61pci_config_ant(struct rt2x00_dev *rt2x00dev,
                               struct antenna_setup *ant)
{
        const struct antenna_sel *sel;
        unsigned int lna;
        unsigned int i;
        u32 reg;

        /*
         * We should never come here because rt2x00lib is supposed
         * to catch this and send us the correct antenna explicitely.
         */
        BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
               ant->tx == ANTENNA_SW_DIVERSITY);

        if (rt2x00dev->curr_band == NL80211_BAND_5GHZ) {
                sel = antenna_sel_a;
                lna = rt2x00_has_cap_external_lna_a(rt2x00dev);
        } else {
                sel = antenna_sel_bg;
                lna = rt2x00_has_cap_external_lna_bg(rt2x00dev);
        }

        for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
                rt61pci_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);

        reg = rt2x00mmio_register_read(rt2x00dev, PHY_CSR0);

        rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG,
                           rt2x00dev->curr_band == NL80211_BAND_2GHZ);
        rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A,
                           rt2x00dev->curr_band == NL80211_BAND_5GHZ);

        rt2x00mmio_register_write(rt2x00dev, PHY_CSR0, reg);

        if (rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF5325))
                rt61pci_config_antenna_5x(rt2x00dev, ant);
        else if (rt2x00_rf(rt2x00dev, RF2527))
                rt61pci_config_antenna_2x(rt2x00dev, ant);
        else if (rt2x00_rf(rt2x00dev, RF2529)) {
                if (rt2x00_has_cap_double_antenna(rt2x00dev))
                        rt61pci_config_antenna_2x(rt2x00dev, ant);
                else
                        rt61pci_config_antenna_2529(rt2x00dev, ant);
        }
}

static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev,
                                    struct rt2x00lib_conf *libconf)
{
        u16 eeprom;
        short lna_gain = 0;

        if (libconf->conf->chandef.chan->band == NL80211_BAND_2GHZ) {
                if (rt2x00_has_cap_external_lna_bg(rt2x00dev))
                        lna_gain += 14;

                eeprom = rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG);
                lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
        } else {
                if (rt2x00_has_cap_external_lna_a(rt2x00dev))
                        lna_gain += 14;

                eeprom = rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A);
                lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
        }

        rt2x00dev->lna_gain = lna_gain;
}

static void rt61pci_config_channel(struct rt2x00_dev *rt2x00dev,
                                   struct rf_channel *rf, const int txpower)
{
        u8 r3;
        u8 r94;
        u8 smart;

        rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
        rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);

        smart = !(rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF2527));

        r3 = rt61pci_bbp_read(rt2x00dev, 3);
        rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
        rt61pci_bbp_write(rt2x00dev, 3, r3);

        r94 = 6;
        if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94))
                r94 += txpower - MAX_TXPOWER;
        else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94))
                r94 += txpower;
        rt61pci_bbp_write(rt2x00dev, 94, r94);

        rt61pci_rf_write(rt2x00dev, 1, rf->rf1);
        rt61pci_rf_write(rt2x00dev, 2, rf->rf2);
        rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
        rt61pci_rf_write(rt2x00dev, 4, rf->rf4);

        udelay(200);

        rt61pci_rf_write(rt2x00dev, 1, rf->rf1);
        rt61pci_rf_write(rt2x00dev, 2, rf->rf2);
        rt61pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
        rt61pci_rf_write(rt2x00dev, 4, rf->rf4);

        udelay(200);

        rt61pci_rf_write(rt2x00dev, 1, rf->rf1);
        rt61pci_rf_write(rt2x00dev, 2, rf->rf2);
        rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
        rt61pci_rf_write(rt2x00dev, 4, rf->rf4);

        msleep(1);
}

static void rt61pci_config_txpower(struct rt2x00_dev *rt2x00dev,
                                   const int txpower)
{
        struct rf_channel rf;

        rf.rf1 = rt2x00_rf_read(rt2x00dev, 1);
        rf.rf2 = rt2x00_rf_read(rt2x00dev, 2);
        rf.rf3 = rt2x00_rf_read(rt2x00dev, 3);
        rf.rf4 = rt2x00_rf_read(rt2x00dev, 4);

        rt61pci_config_channel(rt2x00dev, &rf, txpower);
}

static void rt61pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
                                    struct rt2x00lib_conf *libconf)
{
        u32 reg;

        reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR4);
        rt2x00_set_field32(&reg, TXRX_CSR4_OFDM_TX_RATE_DOWN, 1);
        rt2x00_set_field32(&reg, TXRX_CSR4_OFDM_TX_RATE_STEP, 0);
        rt2x00_set_field32(&reg, TXRX_CSR4_OFDM_TX_FALLBACK_CCK, 0);
        rt2x00_set_field32(&reg, TXRX_CSR4_LONG_RETRY_LIMIT,
                           libconf->conf->long_frame_max_tx_count);
        rt2x00_set_field32(&reg, TXRX_CSR4_SHORT_RETRY_LIMIT,
                           libconf->conf->short_frame_max_tx_count);
        rt2x00mmio_register_write(rt2x00dev, TXRX_CSR4, reg);
}

static void rt61pci_config_ps(struct rt2x00_dev *rt2x00dev,
                                struct rt2x00lib_conf *libconf)
{
        enum dev_state state =
            (libconf->conf->flags & IEEE80211_CONF_PS) ?
                STATE_SLEEP : STATE_AWAKE;
        u32 reg;

        if (state == STATE_SLEEP) {
                reg = rt2x00mmio_register_read(rt2x00dev, MAC_CSR11);
                rt2x00_set_field32(&reg, MAC_CSR11_DELAY_AFTER_TBCN,
                                   rt2x00dev->beacon_int - 10);
                rt2x00_set_field32(&reg, MAC_CSR11_TBCN_BEFORE_WAKEUP,
                                   libconf->conf->listen_interval - 1);
                rt2x00_set_field32(&reg, MAC_CSR11_WAKEUP_LATENCY, 5);

                /* We must first disable autowake before it can be enabled */
                rt2x00_set_field32(&reg, MAC_CSR11_AUTOWAKE, 0);
                rt2x00mmio_register_write(rt2x00dev, MAC_CSR11, reg);

                rt2x00_set_field32(&reg, MAC_CSR11_AUTOWAKE, 1);
                rt2x00mmio_register_write(rt2x00dev, MAC_CSR11, reg);

                rt2x00mmio_register_write(rt2x00dev, SOFT_RESET_CSR,
                                          0x00000005);
                rt2x00mmio_register_write(rt2x00dev, IO_CNTL_CSR, 0x0000001c);
                rt2x00mmio_register_write(rt2x00dev, PCI_USEC_CSR, 0x00000060);

                rt61pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 0);
        } else {
                reg = rt2x00mmio_register_read(rt2x00dev, MAC_CSR11);
                rt2x00_set_field32(&reg, MAC_CSR11_DELAY_AFTER_TBCN, 0);
                rt2x00_set_field32(&reg, MAC_CSR11_TBCN_BEFORE_WAKEUP, 0);
                rt2x00_set_field32(&reg, MAC_CSR11_AUTOWAKE, 0);
                rt2x00_set_field32(&reg, MAC_CSR11_WAKEUP_LATENCY, 0);
                rt2x00mmio_register_write(rt2x00dev, MAC_CSR11, reg);

                rt2x00mmio_register_write(rt2x00dev, SOFT_RESET_CSR,
                                          0x00000007);
                rt2x00mmio_register_write(rt2x00dev, IO_CNTL_CSR, 0x00000018);
                rt2x00mmio_register_write(rt2x00dev, PCI_USEC_CSR, 0x00000020);

                rt61pci_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
        }
}

static void rt61pci_config(struct rt2x00_dev *rt2x00dev,
                           struct rt2x00lib_conf *libconf,
                           const unsigned int flags)
{
        /* Always recalculate LNA gain before changing configuration */
        rt61pci_config_lna_gain(rt2x00dev, libconf);

        if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
                rt61pci_config_channel(rt2x00dev, &libconf->rf,
                                       libconf->conf->power_level);
        if ((flags & IEEE80211_CONF_CHANGE_POWER) &&
            !(flags & IEEE80211_CONF_CHANGE_CHANNEL))
                rt61pci_config_txpower(rt2x00dev, libconf->conf->power_level);
        if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
                rt61pci_config_retry_limit(rt2x00dev, libconf);
        if (flags & IEEE80211_CONF_CHANGE_PS)
                rt61pci_config_ps(rt2x00dev, libconf);
}

/*
 * Link tuning
 */
static void rt61pci_link_stats(struct rt2x00_dev *rt2x00dev,
                               struct link_qual *qual)
{
        u32 reg;

        /*
         * Update FCS error count from register.
         */
        reg = rt2x00mmio_register_read(rt2x00dev, STA_CSR0);
        qual->rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR);

        /*
         * Update False CCA count from register.
         */
        reg = rt2x00mmio_register_read(rt2x00dev, STA_CSR1);
        qual->false_cca = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR);
}

static inline void rt61pci_set_vgc(struct rt2x00_dev *rt2x00dev,
                                   struct link_qual *qual, u8 vgc_level)
{
        if (qual->vgc_level != vgc_level) {
                rt61pci_bbp_write(rt2x00dev, 17, vgc_level);
                qual->vgc_level = vgc_level;
                qual->vgc_level_reg = vgc_level;
        }
}

static void rt61pci_reset_tuner(struct rt2x00_dev *rt2x00dev,
                                struct link_qual *qual)
{
        rt61pci_set_vgc(rt2x00dev, qual, 0x20);
}

static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev,
                               struct link_qual *qual, const u32 count)
{
        u8 up_bound;
        u8 low_bound;

        /*
         * Determine r17 bounds.
         */
        if (rt2x00dev->curr_band == NL80211_BAND_5GHZ) {
                low_bound = 0x28;
                up_bound = 0x48;
                if (rt2x00_has_cap_external_lna_a(rt2x00dev)) {
                        low_bound += 0x10;
                        up_bound += 0x10;
                }
        } else {
                low_bound = 0x20;
                up_bound = 0x40;
                if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
                        low_bound += 0x10;
                        up_bound += 0x10;
                }
        }

        /*
         * If we are not associated, we should go straight to the
         * dynamic CCA tuning.
         */
        if (!rt2x00dev->intf_associated)
                goto dynamic_cca_tune;

        /*
         * Special big-R17 for very short distance
         */
        if (qual->rssi >= -35) {
                rt61pci_set_vgc(rt2x00dev, qual, 0x60);
                return;
        }

        /*
         * Special big-R17 for short distance
         */
        if (qual->rssi >= -58) {
                rt61pci_set_vgc(rt2x00dev, qual, up_bound);
                return;
        }

        /*
         * Special big-R17 for middle-short distance
         */
        if (qual->rssi >= -66) {

                rt61pci_set_vgc(rt2x00dev, qual, low_bound + 0x10);
                return;
        }

        /*
         * Special mid-R17 for middle distance
         */
        if (qual->rssi >= -74) {
                rt61pci_set_vgc(rt2x00dev, qual, low_bound + 0x08);
                return;
        }

        /*
         * Special case: Change up_bound based on the rssi.
         * Lower up_bound when rssi is weaker then -74 dBm.
         */
        up_bound -= 2 * (-74 - qual->rssi);
        if (low_bound > up_bound)
                up_bound = low_bound;

        if (qual->vgc_level > up_bound) {
                rt61pci_set_vgc(rt2x00dev, qual, up_bound);
                return;
        }

dynamic_cca_tune:

        /*
         * r17 does not yet exceed upper limit, continue and base
         * the r17 tuning on the false CCA count.
         */
        if ((qual->false_cca > 512) && (qual->vgc_level < up_bound))
                rt61pci_set_vgc(rt2x00dev, qual, ++qual->vgc_level);
        else if ((qual->false_cca < 100) && (qual->vgc_level > low_bound))
                rt61pci_set_vgc(rt2x00dev, qual, --qual->vgc_level);
}

/*
 * Queue handlers.
 */
static void rt61pci_start_queue(struct data_queue *queue)
{
        struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
        u32 reg;

        switch (queue->qid) {
        case QID_RX:
                reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR0);
                rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX, 0);
                rt2x00mmio_register_write(rt2x00dev, TXRX_CSR0, reg);
                break;
        case QID_BEACON:
                reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR9);
                rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
                rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
                rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
                rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, reg);
                break;
        default:
                break;
        }
}

static void rt61pci_kick_queue(struct data_queue *queue)
{
        struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
        u32 reg;

        switch (queue->qid) {
        case QID_AC_VO:
                reg = rt2x00mmio_register_read(rt2x00dev, TX_CNTL_CSR);
                rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC0, 1);
                rt2x00mmio_register_write(rt2x00dev, TX_CNTL_CSR, reg);
                break;
        case QID_AC_VI:
                reg = rt2x00mmio_register_read(rt2x00dev, TX_CNTL_CSR);
                rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC1, 1);
                rt2x00mmio_register_write(rt2x00dev, TX_CNTL_CSR, reg);
                break;
        case QID_AC_BE:
                reg = rt2x00mmio_register_read(rt2x00dev, TX_CNTL_CSR);
                rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC2, 1);
                rt2x00mmio_register_write(rt2x00dev, TX_CNTL_CSR, reg);
                break;
        case QID_AC_BK:
                reg = rt2x00mmio_register_read(rt2x00dev, TX_CNTL_CSR);
                rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC3, 1);
                rt2x00mmio_register_write(rt2x00dev, TX_CNTL_CSR, reg);
                break;
        default:
                break;
        }
}

static void rt61pci_stop_queue(struct data_queue *queue)
{
        struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
        u32 reg;

        switch (queue->qid) {
        case QID_AC_VO:
                reg = rt2x00mmio_register_read(rt2x00dev, TX_CNTL_CSR);
                rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC0, 1);
                rt2x00mmio_register_write(rt2x00dev, TX_CNTL_CSR, reg);
                break;
        case QID_AC_VI:
                reg = rt2x00mmio_register_read(rt2x00dev, TX_CNTL_CSR);
                rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC1, 1);
                rt2x00mmio_register_write(rt2x00dev, TX_CNTL_CSR, reg);
                break;
        case QID_AC_BE:
                reg = rt2x00mmio_register_read(rt2x00dev, TX_CNTL_CSR);
                rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC2, 1);
                rt2x00mmio_register_write(rt2x00dev, TX_CNTL_CSR, reg);
                break;
        case QID_AC_BK:
                reg = rt2x00mmio_register_read(rt2x00dev, TX_CNTL_CSR);
                rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC3, 1);
                rt2x00mmio_register_write(rt2x00dev, TX_CNTL_CSR, reg);
                break;
        case QID_RX:
                reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR0);
                rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX, 1);
                rt2x00mmio_register_write(rt2x00dev, TXRX_CSR0, reg);
                break;
        case QID_BEACON:
                reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR9);
                rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
                rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
                rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
                rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, reg);

                /*
                 * Wait for possibly running tbtt tasklets.
                 */
                tasklet_kill(&rt2x00dev->tbtt_tasklet);
                break;
        default:
                break;
        }
}

/*
 * Firmware functions
 */
static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
{
        u16 chip;
        char *fw_name;

        pci_read_config_word(to_pci_dev(rt2x00dev->dev), PCI_DEVICE_ID, &chip);
        switch (chip) {
        case RT2561_PCI_ID:
                fw_name = FIRMWARE_RT2561;
                break;
        case RT2561s_PCI_ID:
                fw_name = FIRMWARE_RT2561s;
                break;
        case RT2661_PCI_ID:
                fw_name = FIRMWARE_RT2661;
                break;
        default:
                fw_name = NULL;
                break;
        }

        return fw_name;
}

static int rt61pci_check_firmware(struct rt2x00_dev *rt2x00dev,
                                  const u8 *data, const size_t len)
{
        u16 fw_crc;
        u16 crc;

        /*
         * Only support 8kb firmware files.
         */
        if (len != 8192)
                return FW_BAD_LENGTH;

        /*
         * The last 2 bytes in the firmware array are the crc checksum itself.
         * This means that we should never pass those 2 bytes to the crc
         * algorithm.
         */
        fw_crc = (data[len - 2] << 8 | data[len - 1]);

        /*
         * Use the crc itu-t algorithm.
         */
        crc = crc_itu_t(0, data, len - 2);
        crc = crc_itu_t_byte(crc, 0);
        crc = crc_itu_t_byte(crc, 0);

        return (fw_crc == crc) ? FW_OK : FW_BAD_CRC;
}

static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev,
                                 const u8 *data, const size_t len)
{
        int i;
        u32 reg;

        /*
         * Wait for stable hardware.
         */
        for (i = 0; i < 100; i++) {
                reg = rt2x00mmio_register_read(rt2x00dev, MAC_CSR0);
                if (reg)
                        break;
                msleep(1);
        }

        if (!reg) {
                rt2x00_err(rt2x00dev, "Unstable hardware\n");
                return -EBUSY;
        }

        /*
         * Prepare MCU and mailbox for firmware loading.
         */
        reg = 0;
        rt2x00_set_field32(&reg, MCU_CNTL_CSR_RESET, 1);
        rt2x00mmio_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
        rt2x00mmio_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff);
        rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
        rt2x00mmio_register_write(rt2x00dev, HOST_CMD_CSR, 0);

        /*
         * Write firmware to device.
         */
        reg = 0;
        rt2x00_set_field32(&reg, MCU_CNTL_CSR_RESET, 1);
        rt2x00_set_field32(&reg, MCU_CNTL_CSR_SELECT_BANK, 1);
        rt2x00mmio_register_write(rt2x00dev, MCU_CNTL_CSR, reg);

        rt2x00mmio_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
                                       data, len);

        rt2x00_set_field32(&reg, MCU_CNTL_CSR_SELECT_BANK, 0);
        rt2x00mmio_register_write(rt2x00dev, MCU_CNTL_CSR, reg);

        rt2x00_set_field32(&reg, MCU_CNTL_CSR_RESET, 0);
        rt2x00mmio_register_write(rt2x00dev, MCU_CNTL_CSR, reg);

        for (i = 0; i < 100; i++) {
                reg = rt2x00mmio_register_read(rt2x00dev, MCU_CNTL_CSR);
                if (rt2x00_get_field32(reg, MCU_CNTL_CSR_READY))
                        break;
                msleep(1);
        }

        if (i == 100) {
                rt2x00_err(rt2x00dev, "MCU Control register not ready\n");
                return -EBUSY;
        }

        /*
         * Hardware needs another millisecond before it is ready.
         */
        msleep(1);

        /*
         * Reset MAC and BBP registers.
         */
        reg = 0;
        rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 1);
        rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 1);
        rt2x00mmio_register_write(rt2x00dev, MAC_CSR1, reg);

        reg = rt2x00mmio_register_read(rt2x00dev, MAC_CSR1);
        rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 0);
        rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 0);
        rt2x00mmio_register_write(rt2x00dev, MAC_CSR1, reg);

        reg = rt2x00mmio_register_read(rt2x00dev, MAC_CSR1);
        rt2x00_set_field32(&reg, MAC_CSR1_HOST_READY, 1);
        rt2x00mmio_register_write(rt2x00dev, MAC_CSR1, reg);

        return 0;
}

/*
 * Initialization functions.
 */
static bool rt61pci_get_entry_state(struct queue_entry *entry)
{
        struct queue_entry_priv_mmio *entry_priv = entry->priv_data;
        u32 word;

        if (entry->queue->qid == QID_RX) {
                word = rt2x00_desc_read(entry_priv->desc, 0);

                return rt2x00_get_field32(word, RXD_W0_OWNER_NIC);
        } else {
                word = rt2x00_desc_read(entry_priv->desc, 0);

                return (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
                        rt2x00_get_field32(word, TXD_W0_VALID));
        }
}

static void rt61pci_clear_entry(struct queue_entry *entry)
{
        struct queue_entry_priv_mmio *entry_priv = entry->priv_data;
        struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
        u32 word;

        if (entry->queue->qid == QID_RX) {
                word = rt2x00_desc_read(entry_priv->desc, 5);
                rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS,
                                   skbdesc->skb_dma);
                rt2x00_desc_write(entry_priv->desc, 5, word);

                word = rt2x00_desc_read(entry_priv->desc, 0);
                rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
                rt2x00_desc_write(entry_priv->desc, 0, word);
        } else {
                word = rt2x00_desc_read(entry_priv->desc, 0);
                rt2x00_set_field32(&word, TXD_W0_VALID, 0);
                rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
                rt2x00_desc_write(entry_priv->desc, 0, word);
        }
}

static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev)
{
        struct queue_entry_priv_mmio *entry_priv;
        u32 reg;

        /*
         * Initialize registers.
         */
        reg = rt2x00mmio_register_read(rt2x00dev, TX_RING_CSR0);
        rt2x00_set_field32(&reg, TX_RING_CSR0_AC0_RING_SIZE,
                           rt2x00dev->tx[0].limit);
        rt2x00_set_field32(&reg, TX_RING_CSR0_AC1_RING_SIZE,
                           rt2x00dev->tx[1].limit);
        rt2x00_set_field32(&reg, TX_RING_CSR0_AC2_RING_SIZE,
                           rt2x00dev->tx[2].limit);
        rt2x00_set_field32(&reg, TX_RING_CSR0_AC3_RING_SIZE,
                           rt2x00dev->tx[3].limit);
        rt2x00mmio_register_write(rt2x00dev, TX_RING_CSR0, reg);

        reg = rt2x00mmio_register_read(rt2x00dev, TX_RING_CSR1);
        rt2x00_set_field32(&reg, TX_RING_CSR1_TXD_SIZE,
                           rt2x00dev->tx[0].desc_size / 4);
        rt2x00mmio_register_write(rt2x00dev, TX_RING_CSR1, reg);

        entry_priv = rt2x00dev->tx[0].entries[0].priv_data;
        reg = rt2x00mmio_register_read(rt2x00dev, AC0_BASE_CSR);
        rt2x00_set_field32(&reg, AC0_BASE_CSR_RING_REGISTER,
                           entry_priv->desc_dma);
        rt2x00mmio_register_write(rt2x00dev, AC0_BASE_CSR, reg);

        entry_priv = rt2x00dev->tx[1].entries[0].priv_data;
        reg = rt2x00mmio_register_read(rt2x00dev, AC1_BASE_CSR);
        rt2x00_set_field32(&reg, AC1_BASE_CSR_RING_REGISTER,
                           entry_priv->desc_dma);
        rt2x00mmio_register_write(rt2x00dev, AC1_BASE_CSR, reg);

        entry_priv = rt2x00dev->tx[2].entries[0].priv_data;
        reg = rt2x00mmio_register_read(rt2x00dev, AC2_BASE_CSR);
        rt2x00_set_field32(&reg, AC2_BASE_CSR_RING_REGISTER,
                           entry_priv->desc_dma);
        rt2x00mmio_register_write(rt2x00dev, AC2_BASE_CSR, reg);

        entry_priv = rt2x00dev->tx[3].entries[0].priv_data;
        reg = rt2x00mmio_register_read(rt2x00dev, AC3_BASE_CSR);
        rt2x00_set_field32(&reg, AC3_BASE_CSR_RING_REGISTER,
                           entry_priv->desc_dma);
        rt2x00mmio_register_write(rt2x00dev, AC3_BASE_CSR, reg);

        reg = rt2x00mmio_register_read(rt2x00dev, RX_RING_CSR);
        rt2x00_set_field32(&reg, RX_RING_CSR_RING_SIZE, rt2x00dev->rx->limit);
        rt2x00_set_field32(&reg, RX_RING_CSR_RXD_SIZE,
                           rt2x00dev->rx->desc_size / 4);
        rt2x00_set_field32(&reg, RX_RING_CSR_RXD_WRITEBACK_SIZE, 4);
        rt2x00mmio_register_write(rt2x00dev, RX_RING_CSR, reg);

        entry_priv = rt2x00dev->rx->entries[0].priv_data;
        reg = rt2x00mmio_register_read(rt2x00dev, RX_BASE_CSR);
        rt2x00_set_field32(&reg, RX_BASE_CSR_RING_REGISTER,
                           entry_priv->desc_dma);
        rt2x00mmio_register_write(rt2x00dev, RX_BASE_CSR, reg);

        reg = rt2x00mmio_register_read(rt2x00dev, TX_DMA_DST_CSR);
        rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC0, 2);
        rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC1, 2);
        rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC2, 2);
        rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC3, 2);
        rt2x00mmio_register_write(rt2x00dev, TX_DMA_DST_CSR, reg);

        reg = rt2x00mmio_register_read(rt2x00dev, LOAD_TX_RING_CSR);
        rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC0, 1);
        rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC1, 1);
        rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC2, 1);
        rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC3, 1);
        rt2x00mmio_register_write(rt2x00dev, LOAD_TX_RING_CSR, reg);

        reg = rt2x00mmio_register_read(rt2x00dev, RX_CNTL_CSR);
        rt2x00_set_field32(&reg, RX_CNTL_CSR_LOAD_RXD, 1);
        rt2x00mmio_register_write(rt2x00dev, RX_CNTL_CSR, reg);

        return 0;
}

static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev)
{
        u32 reg;

        reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR0);
        rt2x00_set_field32(&reg, TXRX_CSR0_AUTO_TX_SEQ, 1);
        rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX, 0);
        rt2x00_set_field32(&reg, TXRX_CSR0_TX_WITHOUT_WAITING, 0);
        rt2x00mmio_register_write(rt2x00dev, TXRX_CSR0, reg);

        reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR1);
        rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */
        rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0_VALID, 1);
        rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1, 30); /* Rssi */
        rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1_VALID, 1);
        rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */
        rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2_VALID, 1);
        rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3, 30); /* Rssi */
        rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3_VALID, 1);
        rt2x00mmio_register_write(rt2x00dev, TXRX_CSR1, reg);

        /*
         * CCK TXD BBP registers
         */
        reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR2);
        rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0, 13);
        rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0_VALID, 1);
        rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1, 12);
        rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1_VALID, 1);
        rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2, 11);
        rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2_VALID, 1);
        rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3, 10);
        rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3_VALID, 1);
        rt2x00mmio_register_write(rt2x00dev, TXRX_CSR2, reg);

        /*
         * OFDM TXD BBP registers
         */
        reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR3);
        rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0, 7);
        rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0_VALID, 1);
        rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1, 6);
        rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1_VALID, 1);
        rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2, 5);
        rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2_VALID, 1);
        rt2x00mmio_register_write(rt2x00dev, TXRX_CSR3, reg);

        reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR7);
        rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_6MBS, 59);
        rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_9MBS, 53);
        rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_12MBS, 49);
        rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_18MBS, 46);
        rt2x00mmio_register_write(rt2x00dev, TXRX_CSR7, reg);

        reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR8);
        rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_24MBS, 44);
        rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_36MBS, 42);
        rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_48MBS, 42);
        rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_54MBS, 42);
        rt2x00mmio_register_write(rt2x00dev, TXRX_CSR8, reg);

        reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR9);
        rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL, 0);
        rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
        rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 0);
        rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
        rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
        rt2x00_set_field32(&reg, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0);
        rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, reg);

        rt2x00mmio_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);

        rt2x00mmio_register_write(rt2x00dev, MAC_CSR6, 0x00000fff);

        reg = rt2x00mmio_register_read(rt2x00dev, MAC_CSR9);
        rt2x00_set_field32(&reg, MAC_CSR9_CW_SELECT, 0);
        rt2x00mmio_register_write(rt2x00dev, MAC_CSR9, reg);

        rt2x00mmio_register_write(rt2x00dev, MAC_CSR10, 0x0000071c);

        if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
                return -EBUSY;

        rt2x00mmio_register_write(rt2x00dev, MAC_CSR13, 0x0000e000);

        /*
         * Invalidate all Shared Keys (SEC_CSR0),
         * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5)
         */
        rt2x00mmio_register_write(rt2x00dev, SEC_CSR0, 0x00000000);
        rt2x00mmio_register_write(rt2x00dev, SEC_CSR1, 0x00000000);
        rt2x00mmio_register_write(rt2x00dev, SEC_CSR5, 0x00000000);

        rt2x00mmio_register_write(rt2x00dev, PHY_CSR1, 0x000023b0);
        rt2x00mmio_register_write(rt2x00dev, PHY_CSR5, 0x060a100c);
        rt2x00mmio_register_write(rt2x00dev, PHY_CSR6, 0x00080606);
        rt2x00mmio_register_write(rt2x00dev, PHY_CSR7, 0x00000a08);

        rt2x00mmio_register_write(rt2x00dev, PCI_CFG_CSR, 0x28ca4404);

        rt2x00mmio_register_write(rt2x00dev, TEST_MODE_CSR, 0x00000200);

        rt2x00mmio_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff);

        /*
         * Clear all beacons
         * For the Beacon base registers we only need to clear
         * the first byte since that byte contains the VALID and OWNER
         * bits which (when set to 0) will invalidate the entire beacon.
         */
        rt2x00mmio_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
        rt2x00mmio_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
        rt2x00mmio_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
        rt2x00mmio_register_write(rt2x00dev, HW_BEACON_BASE3, 0);

        /*
         * We must clear the error counters.
         * These registers are cleared on read,
         * so we may pass a useless variable to store the value.
         */
        reg = rt2x00mmio_register_read(rt2x00dev, STA_CSR0);
        reg = rt2x00mmio_register_read(rt2x00dev, STA_CSR1);
        reg = rt2x00mmio_register_read(rt2x00dev, STA_CSR2);

        /*
         * Reset MAC and BBP registers.
         */
        reg = rt2x00mmio_register_read(rt2x00dev, MAC_CSR1);
        rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 1);
        rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 1);
        rt2x00mmio_register_write(rt2x00dev, MAC_CSR1, reg);

        reg = rt2x00mmio_register_read(rt2x00dev, MAC_CSR1);
        rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 0);
        rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 0);
        rt2x00mmio_register_write(rt2x00dev, MAC_CSR1, reg);

        reg = rt2x00mmio_register_read(rt2x00dev, MAC_CSR1);
        rt2x00_set_field32(&reg, MAC_CSR1_HOST_READY, 1);
        rt2x00mmio_register_write(rt2x00dev, MAC_CSR1, reg);

        return 0;
}

static int rt61pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
{
        unsigned int i;
        u8 value;

        for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
                value = rt61pci_bbp_read(rt2x00dev, 0);
                if ((value != 0xff) && (value != 0x00))
                        return 0;
                udelay(REGISTER_BUSY_DELAY);
        }

        rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n");
        return -EACCES;
}

static int rt61pci_init_bbp(struct rt2x00_dev *rt2x00dev)
{
        unsigned int i;
        u16 eeprom;
        u8 reg_id;
        u8 value;

        if (unlikely(rt61pci_wait_bbp_ready(rt2x00dev)))
                return -EACCES;

        rt61pci_bbp_write(rt2x00dev, 3, 0x00);
        rt61pci_bbp_write(rt2x00dev, 15, 0x30);
        rt61pci_bbp_write(rt2x00dev, 21, 0xc8);
        rt61pci_bbp_write(rt2x00dev, 22, 0x38);
        rt61pci_bbp_write(rt2x00dev, 23, 0x06);
        rt61pci_bbp_write(rt2x00dev, 24, 0xfe);
        rt61pci_bbp_write(rt2x00dev, 25, 0x0a);
        rt61pci_bbp_write(rt2x00dev, 26, 0x0d);
        rt61pci_bbp_write(rt2x00dev, 34, 0x12);
        rt61pci_bbp_write(rt2x00dev, 37, 0x07);
        rt61pci_bbp_write(rt2x00dev, 39, 0xf8);
        rt61pci_bbp_write(rt2x00dev, 41, 0x60);
        rt61pci_bbp_write(rt2x00dev, 53, 0x10);
        rt61pci_bbp_write(rt2x00dev, 54, 0x18);
        rt61pci_bbp_write(rt2x00dev, 60, 0x10);
        rt61pci_bbp_write(rt2x00dev, 61, 0x04);
        rt61pci_bbp_write(rt2x00dev, 62, 0x04);
        rt61pci_bbp_write(rt2x00dev, 75, 0xfe);
        rt61pci_bbp_write(rt2x00dev, 86, 0xfe);
        rt61pci_bbp_write(rt2x00dev, 88, 0xfe);
        rt61pci_bbp_write(rt2x00dev, 90, 0x0f);
        rt61pci_bbp_write(rt2x00dev, 99, 0x00);
        rt61pci_bbp_write(rt2x00dev, 102, 0x16);
        rt61pci_bbp_write(rt2x00dev, 107, 0x04);

        for (i = 0; i < EEPROM_BBP_SIZE; i++) {
                eeprom = rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i);

                if (eeprom != 0xffff && eeprom != 0x0000) {
                        reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
                        value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
                        rt61pci_bbp_write(rt2x00dev, reg_id, value);
                }
        }

        return 0;
}

/*
 * Device state switch handlers.
 */
static void rt61pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
                               enum dev_state state)
{
        int mask = (state == STATE_RADIO_IRQ_OFF);
        u32 reg;
        unsigned long flags;

        /*
         * When interrupts are being enabled, the interrupt registers
         * should clear the register to assure a clean state.
         */
        if (state == STATE_RADIO_IRQ_ON) {
                reg = rt2x00mmio_register_read(rt2x00dev, INT_SOURCE_CSR);
                rt2x00mmio_register_write(rt2x00dev, INT_SOURCE_CSR, reg);

                reg = rt2x00mmio_register_read(rt2x00dev, MCU_INT_SOURCE_CSR);
                rt2x00mmio_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg);
        }

        /*
         * Only toggle the interrupts bits we are going to use.
         * Non-checked interrupt bits are disabled by default.
         */
        spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags);

        reg = rt2x00mmio_register_read(rt2x00dev, INT_MASK_CSR);
        rt2x00_set_field32(&reg, INT_MASK_CSR_TXDONE, mask);
        rt2x00_set_field32(&reg, INT_MASK_CSR_RXDONE, mask);
        rt2x00_set_field32(&reg, INT_MASK_CSR_BEACON_DONE, mask);
        rt2x00_set_field32(&reg, INT_MASK_CSR_ENABLE_MITIGATION, mask);
        rt2x00_set_field32(&reg, INT_MASK_CSR_MITIGATION_PERIOD, 0xff);
        rt2x00mmio_register_write(rt2x00dev, INT_MASK_CSR, reg);

        reg = rt2x00mmio_register_read(rt2x00dev, MCU_INT_MASK_CSR);
        rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_0, mask);
        rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_1, mask);
        rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_2, mask);
        rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_3, mask);
        rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_4, mask);
        rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_5, mask);
        rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_6, mask);
        rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_7, mask);
        rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_TWAKEUP, mask);
        rt2x00mmio_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg);

        spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags);

        if (state == STATE_RADIO_IRQ_OFF) {
                /*
                 * Ensure that all tasklets are finished.
                 */
                tasklet_kill(&rt2x00dev->txstatus_tasklet);
                tasklet_kill(&rt2x00dev->rxdone_tasklet);
                tasklet_kill(&rt2x00dev->autowake_tasklet);
                tasklet_kill(&rt2x00dev->tbtt_tasklet);
        }
}

static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev)
{
        u32 reg;

        /*
         * Initialize all registers.
         */
        if (unlikely(rt61pci_init_queues(rt2x00dev) ||
                     rt61pci_init_registers(rt2x00dev) ||
                     rt61pci_init_bbp(rt2x00dev)))
                return -EIO;

        /*
         * Enable RX.
         */
        reg = rt2x00mmio_register_read(rt2x00dev, RX_CNTL_CSR);
        rt2x00_set_field32(&reg, RX_CNTL_CSR_ENABLE_RX_DMA, 1);
        rt2x00mmio_register_write(rt2x00dev, RX_CNTL_CSR, reg);

        return 0;
}

static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev)
{
        /*
         * Disable power
         */
        rt2x00mmio_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
}

static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state)
{
        u32 reg, reg2;
        unsigned int i;
        char put_to_sleep;

        put_to_sleep = (state != STATE_AWAKE);

        reg = rt2x00mmio_register_read(rt2x00dev, MAC_CSR12);
        rt2x00_set_field32(&reg, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep);
        rt2x00_set_field32(&reg, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep);
        rt2x00mmio_register_write(rt2x00dev, MAC_CSR12, reg);

        /*
         * Device is not guaranteed to be in the requested state yet.
         * We must wait until the register indicates that the
         * device has entered the correct state.
         */
        for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
                reg2 = rt2x00mmio_register_read(rt2x00dev, MAC_CSR12);
                state = rt2x00_get_field32(reg2, MAC_CSR12_BBP_CURRENT_STATE);
                if (state == !put_to_sleep)
                        return 0;
                rt2x00mmio_register_write(rt2x00dev, MAC_CSR12, reg);
                msleep(10);
        }

        return -EBUSY;
}

static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
                                    enum dev_state state)
{
        int retval = 0;

        switch (state) {
        case STATE_RADIO_ON:
                retval = rt61pci_enable_radio(rt2x00dev);
                break;
        case STATE_RADIO_OFF:
                rt61pci_disable_radio(rt2x00dev);
                break;
        case STATE_RADIO_IRQ_ON:
        case STATE_RADIO_IRQ_OFF:
                rt61pci_toggle_irq(rt2x00dev, state);
                break;
        case STATE_DEEP_SLEEP:
        case STATE_SLEEP:
        case STATE_STANDBY:
        case STATE_AWAKE:
                retval = rt61pci_set_state(rt2x00dev, state);
                break;
        default:
                retval = -ENOTSUPP;
                break;
        }

        if (unlikely(retval))
                rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n",
                           state, retval);

        return retval;
}

/*
 * TX descriptor initialization
 */
static void rt61pci_write_tx_desc(struct queue_entry *entry,
                                  struct txentry_desc *txdesc)
{
        struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
        struct queue_entry_priv_mmio *entry_priv = entry->priv_data;
        __le32 *txd = entry_priv->desc;
        u32 word;

        /*
         * Start writing the descriptor words.
         */
        word = rt2x00_desc_read(txd, 1);
        rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, entry->queue->qid);
        rt2x00_set_field32(&word, TXD_W1_AIFSN, entry->queue->aifs);
        rt2x00_set_field32(&word, TXD_W1_CWMIN, entry->queue->cw_min);
        rt2x00_set_field32(&word, TXD_W1_CWMAX, entry->queue->cw_max);
        rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
        rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
                           test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
        rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
        rt2x00_desc_write(txd, 1, word);

        word = rt2x00_desc_read(txd, 2);
        rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->u.plcp.signal);
        rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->u.plcp.service);
        rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW,
                           txdesc->u.plcp.length_low);
        rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH,
                           txdesc->u.plcp.length_high);
        rt2x00_desc_write(txd, 2, word);

        if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
                _rt2x00_desc_write(txd, 3, skbdesc->iv[0]);
                _rt2x00_desc_write(txd, 4, skbdesc->iv[1]);
        }

        word = rt2x00_desc_read(txd, 5);
        rt2x00_set_field32(&word, TXD_W5_PID_TYPE, entry->queue->qid);
        rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, entry->entry_idx);
        rt2x00_set_field32(&word, TXD_W5_TX_POWER,
                           TXPOWER_TO_DEV(entry->queue->rt2x00dev->tx_power));
        rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
        rt2x00_desc_write(txd, 5, word);

        if (entry->queue->qid != QID_BEACON) {
                word = rt2x00_desc_read(txd, 6);
                rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS,
                                   skbdesc->skb_dma);
                rt2x00_desc_write(txd, 6, word);

                word = rt2x00_desc_read(txd, 11);
                rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0,
                                   txdesc->length);
                rt2x00_desc_write(txd, 11, word);
        }

        /*
         * Writing TXD word 0 must the last to prevent a race condition with
         * the device, whereby the device may take hold of the TXD before we
         * finished updating it.
         */
        word = rt2x00_desc_read(txd, 0);
        rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
        rt2x00_set_field32(&word, TXD_W0_VALID, 1);
        rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
                           test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
        rt2x00_set_field32(&word, TXD_W0_ACK,
                           test_bit(ENTRY_TXD_ACK, &txdesc->flags));
        rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
                           test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
        rt2x00_set_field32(&word, TXD_W0_OFDM,
                           (txdesc->rate_mode == RATE_MODE_OFDM));
        rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->u.plcp.ifs);
        rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
                           test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
        rt2x00_set_field32(&word, TXD_W0_TKIP_MIC,
                           test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags));
        rt2x00_set_field32(&word, TXD_W0_KEY_TABLE,
                           test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags));
        rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx);
        rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, txdesc->length);
        rt2x00_set_field32(&word, TXD_W0_BURST,
                           test_bit(ENTRY_TXD_BURST, &txdesc->flags));
        rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher);
        rt2x00_desc_write(txd, 0, word);

        /*
         * Register descriptor details in skb frame descriptor.
         */
        skbdesc->desc = txd;
        skbdesc->desc_len = (entry->queue->qid == QID_BEACON) ? TXINFO_SIZE :
                            TXD_DESC_SIZE;
}

/*
 * TX data initialization
 */
static void rt61pci_write_beacon(struct queue_entry *entry,
                                 struct txentry_desc *txdesc)
{
        struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
        struct queue_entry_priv_mmio *entry_priv = entry->priv_data;
        unsigned int beacon_base;
        unsigned int padding_len;
        u32 orig_reg, reg;

        /*
         * Disable beaconing while we are reloading the beacon data,
         * otherwise we might be sending out invalid data.
         */
        reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR9);
        orig_reg = reg;
        rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
        rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, reg);

        /*
         * Write the TX descriptor for the beacon.
         */
        rt61pci_write_tx_desc(entry, txdesc);

        /*
         * Dump beacon to userspace through debugfs.
         */
        rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);

        /*
         * Write entire beacon with descriptor and padding to register.
         */
        padding_len = roundup(entry->skb->len, 4) - entry->skb->len;
        if (padding_len && skb_pad(entry->skb, padding_len)) {
                rt2x00_err(rt2x00dev, "Failure padding beacon, aborting\n");
                /* skb freed by skb_pad() on failure */
                entry->skb = NULL;
                rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, orig_reg);
                return;
        }

        beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
        rt2x00mmio_register_multiwrite(rt2x00dev, beacon_base,
                                       entry_priv->desc, TXINFO_SIZE);
        rt2x00mmio_register_multiwrite(rt2x00dev, beacon_base + TXINFO_SIZE,
                                       entry->skb->data,
                                       entry->skb->len + padding_len);

        /*
         * Enable beaconing again.
         *
         * For Wi-Fi faily generated beacons between participating
         * stations. Set TBTT phase adaptive adjustment step to 8us.
         */
        rt2x00mmio_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);

        rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
        rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, reg);

        /*
         * Clean up beacon skb.
         */
        dev_kfree_skb_any(entry->skb);
        entry->skb = NULL;
}

static void rt61pci_clear_beacon(struct queue_entry *entry)
{
        struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
        u32 orig_reg, reg;

        /*
         * Disable beaconing while we are reloading the beacon data,
         * otherwise we might be sending out invalid data.
         */
        orig_reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR9);
        reg = orig_reg;
        rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
        rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, reg);

        /*
         * Clear beacon.
         */
        rt2x00mmio_register_write(rt2x00dev,
                                  HW_BEACON_OFFSET(entry->entry_idx), 0);

        /*
         * Restore global beaconing state.
         */
        rt2x00mmio_register_write(rt2x00dev, TXRX_CSR9, orig_reg);
}

/*
 * RX control handlers
 */
static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
{
        u8 offset = rt2x00dev->lna_gain;
        u8 lna;

        lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
        switch (lna) {
        case 3:
                offset += 90;
                break;
        case 2:
                offset += 74;
                break;
        case 1:
                offset += 64;
                break;
        default:
                return 0;
        }

        if (rt2x00dev->curr_band == NL80211_BAND_5GHZ) {
                if (lna == 3 || lna == 2)
                        offset += 10;
        }

        return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
}

static void rt61pci_fill_rxdone(struct queue_entry *entry,
                                struct rxdone_entry_desc *rxdesc)
{
        struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
        struct queue_entry_priv_mmio *entry_priv = entry->priv_data;
        u32 word0;
        u32 word1;

        word0 = rt2x00_desc_read(entry_priv->desc, 0);
        word1 = rt2x00_desc_read(entry_priv->desc, 1);

        if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
                rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;

        rxdesc->cipher = rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
        rxdesc->cipher_status = rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);

        if (rxdesc->cipher != CIPHER_NONE) {
                rxdesc->iv[0] = _rt2x00_desc_read(entry_priv->desc, 2);
                rxdesc->iv[1] = _rt2x00_desc_read(entry_priv->desc, 3);
                rxdesc->dev_flags |= RXDONE_CRYPTO_IV;

                rxdesc->icv = _rt2x00_desc_read(entry_priv->desc, 4);
                rxdesc->dev_flags |= RXDONE_CRYPTO_ICV;

                /*
                 * Hardware has stripped IV/EIV data from 802.11 frame during
                 * decryption. It has provided the data separately but rt2x00lib
                 * should decide if it should be reinserted.
                 */
                rxdesc->flags |= RX_FLAG_IV_STRIPPED;

                /*
                 * The hardware has already checked the Michael Mic and has
                 * stripped it from the frame. Signal this to mac80211.
                 */
                rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;

                if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
                        rxdesc->flags |= RX_FLAG_DECRYPTED;
                else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
                        rxdesc->flags |= RX_FLAG_MMIC_ERROR;
        }

        /*
         * Obtain the status about this packet.
         * When frame was received with an OFDM bitrate,
         * the signal is the PLCP value. If it was received with
         * a CCK bitrate the signal is the rate in 100kbit/s.
         */
        rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
        rxdesc->rssi = rt61pci_agc_to_rssi(rt2x00dev, word1);
        rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);

        if (rt2x00_get_field32(word0, RXD_W0_OFDM))
                rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
        else
                rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
        if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
                rxdesc->dev_flags |= RXDONE_MY_BSS;
}

/*
 * Interrupt functions.
 */
static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
{
        struct data_queue *queue;
        struct queue_entry *entry;
        struct queue_entry *entry_done;
        struct queue_entry_priv_mmio *entry_priv;
        struct txdone_entry_desc txdesc;
        u32 word;
        u32 reg;
        int type;
        int index;
        int i;

        /*
         * TX_STA_FIFO is a stack of X entries, hence read TX_STA_FIFO
         * at most X times and also stop processing once the TX_STA_FIFO_VALID
         * flag is not set anymore.
         *
         * The legacy drivers use X=TX_RING_SIZE but state in a comment
         * that the TX_STA_FIFO stack has a size of 16. We stick to our
         * tx ring size for now.
         */
        for (i = 0; i < rt2x00dev->tx->limit; i++) {
                reg = rt2x00mmio_register_read(rt2x00dev, STA_CSR4);
                if (!rt2x00_get_field32(reg, STA_CSR4_VALID))
                        break;

                /*
                 * Skip this entry when it contains an invalid
                 * queue identication number.
                 */
                type = rt2x00_get_field32(reg, STA_CSR4_PID_TYPE);
                queue = rt2x00queue_get_tx_queue(rt2x00dev, type);
                if (unlikely(!queue))
                        continue;

                /*
                 * Skip this entry when it contains an invalid
                 * index number.
                 */
                index = rt2x00_get_field32(reg, STA_CSR4_PID_SUBTYPE);
                if (unlikely(index >= queue->limit))
                        continue;

                entry = &queue->entries[index];
                entry_priv = entry->priv_data;
                word = rt2x00_desc_read(entry_priv->desc, 0);

                if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
                    !rt2x00_get_field32(word, TXD_W0_VALID))
                        return;

                entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
                while (entry != entry_done) {
                        /* Catch up.
                         * Just report any entries we missed as failed.
                         */
                        rt2x00_warn(rt2x00dev, "TX status report missed for entry %d\n",
                                    entry_done->entry_idx);

                        rt2x00lib_txdone_noinfo(entry_done, TXDONE_UNKNOWN);
                        entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
                }

                /*
                 * Obtain the status about this packet.
                 */
                txdesc.flags = 0;
                switch (rt2x00_get_field32(reg, STA_CSR4_TX_RESULT)) {
                case 0: /* Success, maybe with retry */
                        __set_bit(TXDONE_SUCCESS, &txdesc.flags);
                        break;
                case 6: /* Failure, excessive retries */
                        __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
                        fallthrough;    /* this is a failed frame! */
                default: /* Failure */
                        __set_bit(TXDONE_FAILURE, &txdesc.flags);
                }
                txdesc.retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT);

                /*
                 * the frame was retried at least once
                 * -> hw used fallback rates
                 */
                if (txdesc.retry)
                        __set_bit(TXDONE_FALLBACK, &txdesc.flags);

                rt2x00lib_txdone(entry, &txdesc);
        }
}

static void rt61pci_wakeup(struct rt2x00_dev *rt2x00dev)
{
        struct rt2x00lib_conf libconf = { .conf = &rt2x00dev->hw->conf };

        rt61pci_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS);
}

static inline void rt61pci_enable_interrupt(struct rt2x00_dev *rt2x00dev,
                                            struct rt2x00_field32 irq_field)
{
        u32 reg;

        /*
         * Enable a single interrupt. The interrupt mask register
         * access needs locking.
         */
        spin_lock_irq(&rt2x00dev->irqmask_lock);

        reg = rt2x00mmio_register_read(rt2x00dev, INT_MASK_CSR);
        rt2x00_set_field32(&reg, irq_field, 0);
        rt2x00mmio_register_write(rt2x00dev, INT_MASK_CSR, reg);

        spin_unlock_irq(&rt2x00dev->irqmask_lock);
}

static void rt61pci_enable_mcu_interrupt(struct rt2x00_dev *rt2x00dev,
                                         struct rt2x00_field32 irq_field)
{
        u32 reg;

        /*
         * Enable a single MCU interrupt. The interrupt mask register
         * access needs locking.
         */
        spin_lock_irq(&rt2x00dev->irqmask_lock);

        reg = rt2x00mmio_register_read(rt2x00dev, MCU_INT_MASK_CSR);
        rt2x00_set_field32(&reg, irq_field, 0);
        rt2x00mmio_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg);

        spin_unlock_irq(&rt2x00dev->irqmask_lock);
}

static void rt61pci_txstatus_tasklet(struct tasklet_struct *t)
{
        struct rt2x00_dev *rt2x00dev = from_tasklet(rt2x00dev, t,
                                                    txstatus_tasklet);

        rt61pci_txdone(rt2x00dev);
        if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
                rt61pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_TXDONE);
}

static void rt61pci_tbtt_tasklet(struct tasklet_struct *t)
{
        struct rt2x00_dev *rt2x00dev = from_tasklet(rt2x00dev, t, tbtt_tasklet);
        rt2x00lib_beacondone(rt2x00dev);
        if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
                rt61pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_BEACON_DONE);
}

static void rt61pci_rxdone_tasklet(struct tasklet_struct *t)
{
        struct rt2x00_dev *rt2x00dev = from_tasklet(rt2x00dev, t,
                                                    rxdone_tasklet);
        if (rt2x00mmio_rxdone(rt2x00dev))
                tasklet_schedule(&rt2x00dev->rxdone_tasklet);
        else if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
                rt61pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RXDONE);
}

static void rt61pci_autowake_tasklet(struct tasklet_struct *t)
{
        struct rt2x00_dev *rt2x00dev = from_tasklet(rt2x00dev, t,
                                                    autowake_tasklet);
        rt61pci_wakeup(rt2x00dev);
        rt2x00mmio_register_write(rt2x00dev,
                                  M2H_CMD_DONE_CSR, 0xffffffff);
        if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
                rt61pci_enable_mcu_interrupt(rt2x00dev, MCU_INT_MASK_CSR_TWAKEUP);
}

static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance)
{
        struct rt2x00_dev *rt2x00dev = dev_instance;
        u32 reg_mcu, mask_mcu;
        u32 reg, mask;

        /*
         * Get the interrupt sources & saved to local variable.
         * Write register value back to clear pending interrupts.
         */
        reg_mcu = rt2x00mmio_register_read(rt2x00dev, MCU_INT_SOURCE_CSR);
        rt2x00mmio_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg_mcu);

        reg = rt2x00mmio_register_read(rt2x00dev, INT_SOURCE_CSR);
        rt2x00mmio_register_write(rt2x00dev, INT_SOURCE_CSR, reg);

        if (!reg && !reg_mcu)
                return IRQ_NONE;

        if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
                return IRQ_HANDLED;

        /*
         * Schedule tasklets for interrupt handling.
         */
        if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RXDONE))
                tasklet_schedule(&rt2x00dev->rxdone_tasklet);

        if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TXDONE))
                tasklet_schedule(&rt2x00dev->txstatus_tasklet);

        if (rt2x00_get_field32(reg, INT_SOURCE_CSR_BEACON_DONE))
                tasklet_hi_schedule(&rt2x00dev->tbtt_tasklet);

        if (rt2x00_get_field32(reg_mcu, MCU_INT_SOURCE_CSR_TWAKEUP))
                tasklet_schedule(&rt2x00dev->autowake_tasklet);

        /*
         * Since INT_MASK_CSR and INT_SOURCE_CSR use the same bits
         * for interrupts and interrupt masks we can just use the value of
         * INT_SOURCE_CSR to create the interrupt mask.
         */
        mask = reg;
        mask_mcu = reg_mcu;

        /*
         * Disable all interrupts for which a tasklet was scheduled right now,
         * the tasklet will reenable the appropriate interrupts.
         */
        spin_lock(&rt2x00dev->irqmask_lock);

        reg = rt2x00mmio_register_read(rt2x00dev, INT_MASK_CSR);
        reg |= mask;
        rt2x00mmio_register_write(rt2x00dev, INT_MASK_CSR, reg);

        reg = rt2x00mmio_register_read(rt2x00dev, MCU_INT_MASK_CSR);
        reg |= mask_mcu;
        rt2x00mmio_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg);

        spin_unlock(&rt2x00dev->irqmask_lock);

        return IRQ_HANDLED;
}

/*
 * Device probe functions.
 */
static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
{
        struct eeprom_93cx6 eeprom;
        u32 reg;
        u16 word;
        u8 *mac;
        s8 value;

        reg = rt2x00mmio_register_read(rt2x00dev, E2PROM_CSR);

        eeprom.data = rt2x00dev;
        eeprom.register_read = rt61pci_eepromregister_read;
        eeprom.register_write = rt61pci_eepromregister_write;
        eeprom.width = rt2x00_get_field32(reg, E2PROM_CSR_TYPE_93C46) ?
            PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
        eeprom.reg_data_in = 0;
        eeprom.reg_data_out = 0;
        eeprom.reg_data_clock = 0;
        eeprom.reg_chip_select = 0;

        eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
                               EEPROM_SIZE / sizeof(u16));

        /*
         * Start validation of the data that has been read.
         */
        mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
        rt2x00lib_set_mac_address(rt2x00dev, mac);

        word = rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA);
        if (word == 0xffff) {
                rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
                rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
                                   ANTENNA_B);
                rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
                                   ANTENNA_B);
                rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0);
                rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
                rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
                rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5225);
                rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
                rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word);
        }

        word = rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC);
        if (word == 0xffff) {
                rt2x00_set_field16(&word, EEPROM_NIC_ENABLE_DIVERSITY, 0);
                rt2x00_set_field16(&word, EEPROM_NIC_TX_DIVERSITY, 0);
                rt2x00_set_field16(&word, EEPROM_NIC_RX_FIXED, 0);
                rt2x00_set_field16(&word, EEPROM_NIC_TX_FIXED, 0);
                rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
                rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
                rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
                rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
                rt2x00_eeprom_dbg(rt2x00dev, "NIC: 0x%04x\n", word);
        }

        word = rt2x00_eeprom_read(rt2x00dev, EEPROM_LED);
        if (word == 0xffff) {
                rt2x00_set_field16(&word, EEPROM_LED_LED_MODE,
                                   LED_MODE_DEFAULT);
                rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word);
                rt2x00_eeprom_dbg(rt2x00dev, "Led: 0x%04x\n", word);
        }

        word = rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ);
        if (word == 0xffff) {
                rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
                rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0);
                rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
                rt2x00_eeprom_dbg(rt2x00dev, "Freq: 0x%04x\n", word);
        }

        word = rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG);
        if (word == 0xffff) {
                rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
                rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
                rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
                rt2x00_eeprom_dbg(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
        } else {
                value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1);
                if (value < -10 || value > 10)
                        rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
                value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2);
                if (value < -10 || value > 10)
                        rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
                rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
        }

        word = rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A);
        if (word == 0xffff) {
                rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
                rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
                rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
                rt2x00_eeprom_dbg(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word);
        } else {
                value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1);
                if (value < -10 || value > 10)
                        rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
                value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2);
                if (value < -10 || value > 10)
                        rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
                rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
        }

        return 0;
}

static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
{
        u32 reg;
        u16 value;
        u16 eeprom;

        /*
         * Read EEPROM word for configuration.
         */
        eeprom = rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA);

        /*
         * Identify RF chipset.
         */
        value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
        reg = rt2x00mmio_register_read(rt2x00dev, MAC_CSR0);
        rt2x00_set_chip(rt2x00dev, rt2x00_get_field32(reg, MAC_CSR0_CHIPSET),
                        value, rt2x00_get_field32(reg, MAC_CSR0_REVISION));

        if (!rt2x00_rf(rt2x00dev, RF5225) &&
            !rt2x00_rf(rt2x00dev, RF5325) &&
            !rt2x00_rf(rt2x00dev, RF2527) &&
            !rt2x00_rf(rt2x00dev, RF2529)) {
                rt2x00_err(rt2x00dev, "Invalid RF chipset detected\n");
                return -ENODEV;
        }

        /*
         * Determine number of antennas.
         */
        if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_NUM) == 2)
                __set_bit(CAPABILITY_DOUBLE_ANTENNA, &rt2x00dev->cap_flags);

        /*
         * Identify default antenna configuration.
         */
        rt2x00dev->default_ant.tx =
            rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
        rt2x00dev->default_ant.rx =
            rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);

        /*
         * Read the Frame type.
         */
        if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE))
                __set_bit(CAPABILITY_FRAME_TYPE, &rt2x00dev->cap_flags);

        /*
         * Detect if this device has a hardware controlled radio.
         */
        if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
                __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);

        /*
         * Read frequency offset and RF programming sequence.
         */
        eeprom = rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ);
        if (rt2x00_get_field16(eeprom, EEPROM_FREQ_SEQ))
                __set_bit(CAPABILITY_RF_SEQUENCE, &rt2x00dev->cap_flags);

        rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);

        /*
         * Read external LNA informations.
         */
        eeprom = rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC);

        if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
                __set_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags);
        if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
                __set_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags);

        /*
         * When working with a RF2529 chip without double antenna,
         * the antenna settings should be gathered from the NIC
         * eeprom word.
         */
        if (rt2x00_rf(rt2x00dev, RF2529) &&
            !rt2x00_has_cap_double_antenna(rt2x00dev)) {
                rt2x00dev->default_ant.rx =
                    ANTENNA_A + rt2x00_get_field16(eeprom, EEPROM_NIC_RX_FIXED);
                rt2x00dev->default_ant.tx =
                    ANTENNA_B - rt2x00_get_field16(eeprom, EEPROM_NIC_TX_FIXED);

                if (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY))
                        rt2x00dev->default_ant.tx = ANTENNA_SW_DIVERSITY;
                if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY))
                        rt2x00dev->default_ant.rx = ANTENNA_SW_DIVERSITY;
        }

        /*
         * Store led settings, for correct led behaviour.
         * If the eeprom value is invalid,
         * switch to default led mode.
         */
#ifdef CONFIG_RT2X00_LIB_LEDS
        eeprom = rt2x00_eeprom_read(rt2x00dev, EEPROM_LED);
        value = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE);

        rt61pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
        rt61pci_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
        if (value == LED_MODE_SIGNAL_STRENGTH)
                rt61pci_init_led(rt2x00dev, &rt2x00dev->led_qual,
                                 LED_TYPE_QUALITY);

        rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value);
        rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0,
                           rt2x00_get_field16(eeprom,
                                              EEPROM_LED_POLARITY_GPIO_0));
        rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1,
                           rt2x00_get_field16(eeprom,
                                              EEPROM_LED_POLARITY_GPIO_1));
        rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2,
                           rt2x00_get_field16(eeprom,
                                              EEPROM_LED_POLARITY_GPIO_2));
        rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3,
                           rt2x00_get_field16(eeprom,
                                              EEPROM_LED_POLARITY_GPIO_3));
        rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4,
                           rt2x00_get_field16(eeprom,
                                              EEPROM_LED_POLARITY_GPIO_4));
        rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT,
                           rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
        rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG,
                           rt2x00_get_field16(eeprom,
                                              EEPROM_LED_POLARITY_RDY_G));
        rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
                           rt2x00_get_field16(eeprom,
                                              EEPROM_LED_POLARITY_RDY_A));
#endif /* CONFIG_RT2X00_LIB_LEDS */

        return 0;
}

/*
 * RF value list for RF5225 & RF5325
 * Supports: 2.4 GHz & 5.2 GHz, rf_sequence disabled
 */
static const struct rf_channel rf_vals_noseq[] = {
        { 1,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
        { 2,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
        { 3,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
        { 4,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
        { 5,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
        { 6,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
        { 7,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
        { 8,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
        { 9,  0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
        { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
        { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
        { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
        { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
        { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },

        /* 802.11 UNI / HyperLan 2 */
        { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 },
        { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 },
        { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b },
        { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 },
        { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b },
        { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 },
        { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 },
        { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b },

        /* 802.11 HyperLan 2 */
        { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 },
        { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b },
        { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 },
        { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b },
        { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 },
        { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 },
        { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b },
        { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 },
        { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b },
        { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 },

        /* 802.11 UNII */
        { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 },
        { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f },
        { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 },
        { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 },
        { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f },
        { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 },

        /* MMAC(Japan)J52 ch 34,38,42,46 */
        { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b },
        { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 },
        { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b },
        { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 },
};

/*
 * RF value list for RF5225 & RF5325
 * Supports: 2.4 GHz & 5.2 GHz, rf_sequence enabled
 */
static const struct rf_channel rf_vals_seq[] = {
        { 1,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
        { 2,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
        { 3,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
        { 4,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
        { 5,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
        { 6,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
        { 7,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
        { 8,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
        { 9,  0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
        { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
        { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
        { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
        { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
        { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },

        /* 802.11 UNI / HyperLan 2 */
        { 36, 0x00002cd4, 0x0004481a, 0x00098455, 0x000c0a03 },
        { 40, 0x00002cd0, 0x00044682, 0x00098455, 0x000c0a03 },
        { 44, 0x00002cd0, 0x00044686, 0x00098455, 0x000c0a1b },
        { 48, 0x00002cd0, 0x0004468e, 0x00098655, 0x000c0a0b },
        { 52, 0x00002cd0, 0x00044692, 0x00098855, 0x000c0a23 },
        { 56, 0x00002cd0, 0x0004469a, 0x00098c55, 0x000c0a13 },
        { 60, 0x00002cd0, 0x000446a2, 0x00098e55, 0x000c0a03 },
        { 64, 0x00002cd0, 0x000446a6, 0x00099255, 0x000c0a1b },

        /* 802.11 HyperLan 2 */
        { 100, 0x00002cd4, 0x0004489a, 0x000b9855, 0x000c0a03 },
        { 104, 0x00002cd4, 0x000448a2, 0x000b9855, 0x000c0a03 },
        { 108, 0x00002cd4, 0x000448aa, 0x000b9855, 0x000c0a03 },
        { 112, 0x00002cd4, 0x000448b2, 0x000b9a55, 0x000c0a03 },
        { 116, 0x00002cd4, 0x000448ba, 0x000b9a55, 0x000c0a03 },
        { 120, 0x00002cd0, 0x00044702, 0x000b9a55, 0x000c0a03 },
        { 124, 0x00002cd0, 0x00044706, 0x000b9a55, 0x000c0a1b },
        { 128, 0x00002cd0, 0x0004470e, 0x000b9c55, 0x000c0a0b },
        { 132, 0x00002cd0, 0x00044712, 0x000b9c55, 0x000c0a23 },
        { 136, 0x00002cd0, 0x0004471a, 0x000b9e55, 0x000c0a13 },

        /* 802.11 UNII */
        { 140, 0x00002cd0, 0x00044722, 0x000b9e55, 0x000c0a03 },
        { 149, 0x00002cd0, 0x0004472e, 0x000ba255, 0x000c0a1b },
        { 153, 0x00002cd0, 0x00044736, 0x000ba255, 0x000c0a0b },
        { 157, 0x00002cd4, 0x0004490a, 0x000ba255, 0x000c0a17 },
        { 161, 0x00002cd4, 0x00044912, 0x000ba255, 0x000c0a17 },
        { 165, 0x00002cd4, 0x0004491a, 0x000ba255, 0x000c0a17 },

        /* MMAC(Japan)J52 ch 34,38,42,46 */
        { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000c0a0b },
        { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000c0a13 },
        { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000c0a1b },
        { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 },
};

static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
        struct hw_mode_spec *spec = &rt2x00dev->spec;
        struct channel_info *info;
        char *tx_power;
        unsigned int i;

        /*
         * Disable powersaving as default.
         */
        rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;

        /*
         * Initialize all hw fields.
         */
        ieee80211_hw_set(rt2x00dev->hw, PS_NULLFUNC_STACK);
        ieee80211_hw_set(rt2x00dev->hw, SUPPORTS_PS);
        ieee80211_hw_set(rt2x00dev->hw, HOST_BROADCAST_PS_BUFFERING);
        ieee80211_hw_set(rt2x00dev->hw, SIGNAL_DBM);

        SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
        SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
                                rt2x00_eeprom_addr(rt2x00dev,
                                                   EEPROM_MAC_ADDR_0));

        /*
         * As rt61 has a global fallback table we cannot specify
         * more then one tx rate per frame but since the hw will
         * try several rates (based on the fallback table) we should
         * initialize max_report_rates to the maximum number of rates
         * we are going to try. Otherwise mac80211 will truncate our
         * reported tx rates and the rc algortihm will end up with
         * incorrect data.
         */
        rt2x00dev->hw->max_rates = 1;
        rt2x00dev->hw->max_report_rates = 7;
        rt2x00dev->hw->max_rate_tries = 1;

        /*
         * Initialize hw_mode information.
         */
        spec->supported_bands = SUPPORT_BAND_2GHZ;
        spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;

        if (!rt2x00_has_cap_rf_sequence(rt2x00dev)) {
                spec->num_channels = 14;
                spec->channels = rf_vals_noseq;
        } else {
                spec->num_channels = 14;
                spec->channels = rf_vals_seq;
        }

        if (rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF5325)) {
                spec->supported_bands |= SUPPORT_BAND_5GHZ;
                spec->num_channels = ARRAY_SIZE(rf_vals_seq);
        }

        /*
         * Create channel information array
         */
        info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL);
        if (!info)
                return -ENOMEM;

        spec->channels_info = info;

        tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
        for (i = 0; i < 14; i++) {
                info[i].max_power = MAX_TXPOWER;
                info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
        }

        if (spec->num_channels > 14) {
                tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
                for (i = 14; i < spec->num_channels; i++) {
                        info[i].max_power = MAX_TXPOWER;
                        info[i].default_power1 =
                                        TXPOWER_FROM_DEV(tx_power[i - 14]);
                }
        }

        return 0;
}

static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
{
        int retval;
        u32 reg;

        /*
         * Disable power saving.
         */
        rt2x00mmio_register_write(rt2x00dev, SOFT_RESET_CSR, 0x00000007);

        /*
         * Allocate eeprom data.
         */
        retval = rt61pci_validate_eeprom(rt2x00dev);
        if (retval)
                return retval;

        retval = rt61pci_init_eeprom(rt2x00dev);
        if (retval)
                return retval;

        /*
         * Enable rfkill polling by setting GPIO direction of the
         * rfkill switch GPIO pin correctly.
         */
        reg = rt2x00mmio_register_read(rt2x00dev, MAC_CSR13);
        rt2x00_set_field32(&reg, MAC_CSR13_DIR5, 1);
        rt2x00mmio_register_write(rt2x00dev, MAC_CSR13, reg);

        /*
         * Initialize hw specifications.
         */
        retval = rt61pci_probe_hw_mode(rt2x00dev);
        if (retval)
                return retval;

        /*
         * This device has multiple filters for control frames,
         * but has no a separate filter for PS Poll frames.
         */
        __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);

        /*
         * This device requires firmware and DMA mapped skbs.
         */
        __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
        __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
        if (!modparam_nohwcrypt)
                __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
        __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);

        /*
         * Set the rssi offset.
         */
        rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;

        return 0;
}

/*
 * IEEE80211 stack callback functions.
 */
static int rt61pci_conf_tx(struct ieee80211_hw *hw,
                           struct ieee80211_vif *vif, u16 queue_idx,
                           const struct ieee80211_tx_queue_params *params)
{
        struct rt2x00_dev *rt2x00dev = hw->priv;
        struct data_queue *queue;
        struct rt2x00_field32 field;
        int retval;
        u32 reg;
        u32 offset;

        /*
         * First pass the configuration through rt2x00lib, that will
         * update the queue settings and validate the input. After that
         * we are free to update the registers based on the value
         * in the queue parameter.
         */
        retval = rt2x00mac_conf_tx(hw, vif, queue_idx, params);
        if (retval)
                return retval;

        /*
         * We only need to perform additional register initialization
         * for WMM queues.
         */
        if (queue_idx >= 4)
                return 0;

        queue = rt2x00queue_get_tx_queue(rt2x00dev, queue_idx);

        /* Update WMM TXOP register */
        offset = AC_TXOP_CSR0 + (sizeof(u32) * (!!(queue_idx & 2)));
        field.bit_offset = (queue_idx & 1) * 16;
        field.bit_mask = 0xffff << field.bit_offset;

        reg = rt2x00mmio_register_read(rt2x00dev, offset);
        rt2x00_set_field32(&reg, field, queue->txop);
        rt2x00mmio_register_write(rt2x00dev, offset, reg);

        /* Update WMM registers */
        field.bit_offset = queue_idx * 4;
        field.bit_mask = 0xf << field.bit_offset;

        reg = rt2x00mmio_register_read(rt2x00dev, AIFSN_CSR);
        rt2x00_set_field32(&reg, field, queue->aifs);
        rt2x00mmio_register_write(rt2x00dev, AIFSN_CSR, reg);

        reg = rt2x00mmio_register_read(rt2x00dev, CWMIN_CSR);
        rt2x00_set_field32(&reg, field, queue->cw_min);
        rt2x00mmio_register_write(rt2x00dev, CWMIN_CSR, reg);

        reg = rt2x00mmio_register_read(rt2x00dev, CWMAX_CSR);
        rt2x00_set_field32(&reg, field, queue->cw_max);
        rt2x00mmio_register_write(rt2x00dev, CWMAX_CSR, reg);

        return 0;
}

static u64 rt61pci_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
{
        struct rt2x00_dev *rt2x00dev = hw->priv;
        u64 tsf;
        u32 reg;

        reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR13);
        tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32;
        reg = rt2x00mmio_register_read(rt2x00dev, TXRX_CSR12);
        tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER);

        return tsf;
}

static const struct ieee80211_ops rt61pci_mac80211_ops = {
        .tx                     = rt2x00mac_tx,
        .start                  = rt2x00mac_start,
        .stop                   = rt2x00mac_stop,
        .add_interface          = rt2x00mac_add_interface,
        .remove_interface       = rt2x00mac_remove_interface,
        .config                 = rt2x00mac_config,
        .configure_filter       = rt2x00mac_configure_filter,
        .set_key                = rt2x00mac_set_key,
        .sw_scan_start          = rt2x00mac_sw_scan_start,
        .sw_scan_complete       = rt2x00mac_sw_scan_complete,
        .get_stats              = rt2x00mac_get_stats,
        .bss_info_changed       = rt2x00mac_bss_info_changed,
        .conf_tx                = rt61pci_conf_tx,
        .get_tsf                = rt61pci_get_tsf,
        .rfkill_poll            = rt2x00mac_rfkill_poll,
        .flush                  = rt2x00mac_flush,
        .set_antenna            = rt2x00mac_set_antenna,
        .get_antenna            = rt2x00mac_get_antenna,
        .get_ringparam          = rt2x00mac_get_ringparam,
        .tx_frames_pending      = rt2x00mac_tx_frames_pending,
};

static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
        .irq_handler            = rt61pci_interrupt,
        .txstatus_tasklet       = rt61pci_txstatus_tasklet,
        .tbtt_tasklet           = rt61pci_tbtt_tasklet,
        .rxdone_tasklet         = rt61pci_rxdone_tasklet,
        .autowake_tasklet       = rt61pci_autowake_tasklet,
        .probe_hw               = rt61pci_probe_hw,
        .get_firmware_name      = rt61pci_get_firmware_name,
        .check_firmware         = rt61pci_check_firmware,
        .load_firmware          = rt61pci_load_firmware,
        .initialize             = rt2x00mmio_initialize,
        .uninitialize           = rt2x00mmio_uninitialize,
        .get_entry_state        = rt61pci_get_entry_state,
        .clear_entry            = rt61pci_clear_entry,
        .set_device_state       = rt61pci_set_device_state,
        .rfkill_poll            = rt61pci_rfkill_poll,
        .link_stats             = rt61pci_link_stats,
        .reset_tuner            = rt61pci_reset_tuner,
        .link_tuner             = rt61pci_link_tuner,
        .start_queue            = rt61pci_start_queue,
        .kick_queue             = rt61pci_kick_queue,
        .stop_queue             = rt61pci_stop_queue,
        .flush_queue            = rt2x00mmio_flush_queue,
        .write_tx_desc          = rt61pci_write_tx_desc,
        .write_beacon           = rt61pci_write_beacon,
        .clear_beacon           = rt61pci_clear_beacon,
        .fill_rxdone            = rt61pci_fill_rxdone,
        .config_shared_key      = rt61pci_config_shared_key,
        .config_pairwise_key    = rt61pci_config_pairwise_key,
        .config_filter          = rt61pci_config_filter,
        .config_intf            = rt61pci_config_intf,
        .config_erp             = rt61pci_config_erp,
        .config_ant             = rt61pci_config_ant,
        .config                 = rt61pci_config,
};

static void rt61pci_queue_init(struct data_queue *queue)
{
        switch (queue->qid) {
        case QID_RX:
                queue->limit = 32;
                queue->data_size = DATA_FRAME_SIZE;
                queue->desc_size = RXD_DESC_SIZE;
                queue->priv_size = sizeof(struct queue_entry_priv_mmio);
                break;

        case QID_AC_VO:
        case QID_AC_VI:
        case QID_AC_BE:
        case QID_AC_BK:
                queue->limit = 32;
                queue->data_size = DATA_FRAME_SIZE;
                queue->desc_size = TXD_DESC_SIZE;
                queue->priv_size = sizeof(struct queue_entry_priv_mmio);
                break;

        case QID_BEACON:
                queue->limit = 4;
                queue->data_size = 0; /* No DMA required for beacons */
                queue->desc_size = TXINFO_SIZE;
                queue->priv_size = sizeof(struct queue_entry_priv_mmio);
                break;

        case QID_ATIM:
        default:
                BUG();
                break;
        }
}

static const struct rt2x00_ops rt61pci_ops = {
        .name                   = KBUILD_MODNAME,
        .max_ap_intf            = 4,
        .eeprom_size            = EEPROM_SIZE,
        .rf_size                = RF_SIZE,
        .tx_queues              = NUM_TX_QUEUES,
        .queue_init             = rt61pci_queue_init,
        .lib                    = &rt61pci_rt2x00_ops,
        .hw                     = &rt61pci_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
        .debugfs                = &rt61pci_rt2x00debug,
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
};

/*
 * RT61pci module information.
 */
static const struct pci_device_id rt61pci_device_table[] = {
        /* RT2561s */
        { PCI_DEVICE(0x1814, 0x0301) },
        /* RT2561 v2 */
        { PCI_DEVICE(0x1814, 0x0302) },
        /* RT2661 */
        { PCI_DEVICE(0x1814, 0x0401) },
        { 0, }
};

MODULE_AUTHOR(DRV_PROJECT);
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION("Ralink RT61 PCI & PCMCIA Wireless LAN driver.");
MODULE_DEVICE_TABLE(pci, rt61pci_device_table);
MODULE_FIRMWARE(FIRMWARE_RT2561);
MODULE_FIRMWARE(FIRMWARE_RT2561s);
MODULE_FIRMWARE(FIRMWARE_RT2661);
MODULE_LICENSE("GPL");