/* SPDX-License-Identifier: GPL-2.0-only
 *
 * Copyright (C) 2020-21 Intel Corporation.
 */

#ifndef IOSM_IPC_IMEM_H
#define IOSM_IPC_IMEM_H

#include <linux/skbuff.h>

#include "iosm_ipc_mmio.h"
#include "iosm_ipc_pcie.h"
#include "iosm_ipc_uevent.h"
#include "iosm_ipc_wwan.h"
#include "iosm_ipc_task_queue.h"

struct ipc_chnl_cfg;

/* IRQ moderation in usec */
#define IRQ_MOD_OFF 0
#define IRQ_MOD_NET 1000
#define IRQ_MOD_TRC 4000

/* Either the PSI image is accepted by CP or the suspended flash tool is waken,
 * informed that the CP ROM driver is not ready to process the PSI image.
 * unit : milliseconds
 */
#define IPC_PSI_TRANSFER_TIMEOUT 3000

/* Timeout in 20 msec to wait for the modem to boot up to
 * IPC_MEM_DEVICE_IPC_INIT state.
 * unit : milliseconds (500 * ipc_util_msleep(20))
 */
#define IPC_MODEM_BOOT_TIMEOUT 500

/* Wait timeout for ipc status reflects IPC_MEM_DEVICE_IPC_UNINIT
 * unit : milliseconds
 */
#define IPC_MODEM_UNINIT_TIMEOUT_MS 30

/* Pending time for processing data.
 * unit : milliseconds
 */
#define IPC_PEND_DATA_TIMEOUT 500

/* The timeout in milliseconds for application to wait for remote time. */
#define IPC_REMOTE_TS_TIMEOUT_MS 10

/* Timeout for TD allocation retry.
 * unit : milliseconds
 */
#define IPC_TD_ALLOC_TIMER_PERIOD_MS 100

/* Host sleep target is host */
#define IPC_HOST_SLEEP_HOST 0

/* Host sleep target is device */
#define IPC_HOST_SLEEP_DEVICE 1

/* Sleep message, target host: AP enters sleep / target device: CP is
 * allowed to enter sleep and shall use the host sleep protocol
 */
#define IPC_HOST_SLEEP_ENTER_SLEEP 0

/* Sleep_message, target host: AP exits  sleep / target device: CP is
 * NOT allowed to enter sleep
 */
#define IPC_HOST_SLEEP_EXIT_SLEEP 1

#define IMEM_IRQ_DONT_CARE (-1)

#define IPC_MEM_MAX_CHANNELS 8

#define IPC_MEM_MUX_IP_SESSION_ENTRIES 8

#define IPC_MEM_MUX_IP_CH_IF_ID 0

#define TD_UPDATE_DEFAULT_TIMEOUT_USEC 1900

#define FORCE_UPDATE_DEFAULT_TIMEOUT_USEC 500

/* Sleep_message, target host: not applicable  / target device: CP is
 * allowed to enter sleep and shall NOT use the device sleep protocol
 */
#define IPC_HOST_SLEEP_ENTER_SLEEP_NO_PROTOCOL 2

/* in_band_crash_signal IPC_MEM_INBAND_CRASH_SIG
 * Modem crash notification configuration. If this value is non-zero then
 * FEATURE_SET message will be sent to the Modem as a result the Modem will
 * signal Crash via Execution Stage register. If this value is zero then Modem
 * will use out-of-band method to notify about it's Crash.
 */
#define IPC_MEM_INBAND_CRASH_SIG 1

/* Extra headroom to be allocated for DL SKBs to allow addition of Ethernet
 * header
 */
#define IPC_MEM_DL_ETH_OFFSET 16

#define IPC_CB(skb) ((struct ipc_skb_cb *)((skb)->cb))
#define IOSM_CHIP_INFO_SIZE_MAX 100

#define FULLY_FUNCTIONAL 0
#define IOSM_DEVLINK_INIT 1

/* List of the supported UL/DL pipes. */
enum ipc_mem_pipes {
        IPC_MEM_PIPE_0 = 0,
        IPC_MEM_PIPE_1,
        IPC_MEM_PIPE_2,
        IPC_MEM_PIPE_3,
        IPC_MEM_PIPE_4,
        IPC_MEM_PIPE_5,
        IPC_MEM_PIPE_6,
        IPC_MEM_PIPE_7,
        IPC_MEM_PIPE_8,
        IPC_MEM_PIPE_9,
        IPC_MEM_PIPE_10,
        IPC_MEM_PIPE_11,
        IPC_MEM_PIPE_12,
        IPC_MEM_PIPE_13,
        IPC_MEM_PIPE_14,
        IPC_MEM_PIPE_15,
        IPC_MEM_PIPE_16,
        IPC_MEM_PIPE_17,
        IPC_MEM_PIPE_18,
        IPC_MEM_PIPE_19,
        IPC_MEM_PIPE_20,
        IPC_MEM_PIPE_21,
        IPC_MEM_PIPE_22,
        IPC_MEM_PIPE_23,
        IPC_MEM_MAX_PIPES
};

/* Enum defining channel states. */
enum ipc_channel_state {
        IMEM_CHANNEL_FREE,
        IMEM_CHANNEL_RESERVED,
        IMEM_CHANNEL_ACTIVE,
        IMEM_CHANNEL_CLOSING,
};

/* Time Unit */
enum ipc_time_unit {
        IPC_SEC = 0,
        IPC_MILLI_SEC = 1,
        IPC_MICRO_SEC = 2,
        IPC_NANO_SEC = 3,
        IPC_PICO_SEC = 4,
        IPC_FEMTO_SEC = 5,
        IPC_ATTO_SEC = 6,
};

/**
 * enum ipc_ctype - Enum defining supported channel type needed for control
 *                  /IP traffic.
 * @IPC_CTYPE_WWAN:             Used for IP traffic
 * @IPC_CTYPE_CTRL:             Used for Control Communication
 */
enum ipc_ctype {
        IPC_CTYPE_WWAN,
        IPC_CTYPE_CTRL,
};

/* Pipe direction. */
enum ipc_mem_pipe_dir {
        IPC_MEM_DIR_UL,
        IPC_MEM_DIR_DL,
};

/* HP update identifier. To be used as data for ipc_cp_irq_hpda_update() */
enum ipc_hp_identifier {
        IPC_HP_MR = 0,
        IPC_HP_PM_TRIGGER,
        IPC_HP_WAKEUP_SPEC_TMR,
        IPC_HP_TD_UPD_TMR_START,
        IPC_HP_TD_UPD_TMR,
        IPC_HP_FAST_TD_UPD_TMR,
        IPC_HP_UL_WRITE_TD,
        IPC_HP_DL_PROCESS,
        IPC_HP_NET_CHANNEL_INIT,
        IPC_HP_CDEV_OPEN,
};

/**
 * struct ipc_pipe - Structure for Pipe.
 * @tdr_start:                  Ipc private protocol Transfer Descriptor Ring
 * @channel:                    Id of the sio device, set by imem_sio_open,
 *                              needed to pass DL char to the user terminal
 * @skbr_start:                 Circular buffer for skbuf and the buffer
 *                              reference in a tdr_start entry.
 * @phy_tdr_start:              Transfer descriptor start address
 * @old_head:                   last head pointer reported to CP.
 * @old_tail:                   AP read position before CP moves the read
 *                              position to write/head. If CP has consumed the
 *                              buffers, AP has to freed the skbuf starting at
 *                              tdr_start[old_tail].
 * @nr_of_entries:              Number of elements of skb_start and tdr_start.
 * @max_nr_of_queued_entries:   Maximum number of queued entries in TDR
 * @accumulation_backoff:       Accumulation in usec for accumulation
 *                              backoff (0 = no acc backoff)
 * @irq_moderation:             timer in usec for irq_moderation
 *                              (0=no irq moderation)
 * @pipe_nr:                    Pipe identification number
 * @irq:                        Interrupt vector
 * @dir:                        Direction of data stream in pipe
 * @td_tag:                     Unique tag of the buffer queued
 * @buf_size:                   Buffer size (in bytes) for preallocated
 *                              buffers (for DL pipes)
 * @nr_of_queued_entries:       Aueued number of entries
 * @is_open:                    Check for open pipe status
 */
struct ipc_pipe {
        struct ipc_protocol_td *tdr_start;
        struct ipc_mem_channel *channel;
        struct sk_buff **skbr_start;
        dma_addr_t phy_tdr_start;
        u32 old_head;
        u32 old_tail;
        u32 nr_of_entries;
        u32 max_nr_of_queued_entries;
        u32 accumulation_backoff;
        u32 irq_moderation;
        u32 pipe_nr;
        u32 irq;
        enum ipc_mem_pipe_dir dir;
        u32 td_tag;
        u32 buf_size;
        u16 nr_of_queued_entries;
        u8 is_open:1;
};

/**
 * struct ipc_mem_channel - Structure for Channel.
 * @channel_id:         Instance of the channel list and is return to the user
 *                      at the end of the open operation.
 * @ctype:              Control or netif channel.
 * @index:              unique index per ctype
 * @ul_pipe:            pipe objects
 * @dl_pipe:            pipe objects
 * @if_id:              Interface ID
 * @net_err_count:      Number of downlink errors returned by ipc_wwan_receive
 *                      interface at the entry point of the IP stack.
 * @state:              Free, reserved or busy (in use).
 * @ul_sem:             Needed for the blocking write or uplink transfer.
 * @ul_list:            Uplink accumulator which is filled by the uplink
 *                      char app or IP stack. The socket buffer pointer are
 *                      added to the descriptor list in the kthread context.
 */
struct ipc_mem_channel {
        int channel_id;
        enum ipc_ctype ctype;
        int index;
        struct ipc_pipe ul_pipe;
        struct ipc_pipe dl_pipe;
        int if_id;
        u32 net_err_count;
        enum ipc_channel_state state;
        struct completion ul_sem;
        struct sk_buff_head ul_list;
};

/**
 * enum ipc_phase - Different AP and CP phases.
 *                  The enums defined after "IPC_P_ROM" and before
 *                  "IPC_P_RUN" indicates the operating state where CP can
 *                  respond to any requests. So while introducing new phase
 *                  this shall be taken into consideration.
 * @IPC_P_OFF:          On host PC, the PCIe device link settings are known
 *                      about the combined power on. PC is running, the driver
 *                      is loaded and CP is in power off mode. The PCIe bus
 *                      driver call the device power mode D3hot. In this phase
 *                      the driver the polls the device, until the device is in
 *                      the power on state and signals the power mode D0.
 * @IPC_P_OFF_REQ:      The intermediate phase between cleanup activity starts
 *                      and ends.
 * @IPC_P_CRASH:        The phase indicating CP crash
 * @IPC_P_CD_READY:     The phase indicating CP core dump is ready
 * @IPC_P_ROM:          After power on, CP starts in ROM mode and the IPC ROM
 *                      driver is waiting 150 ms for the AP active notification
 *                      saved in the PCI link status register.
 * @IPC_P_PSI:          Primary signed image download phase
 * @IPC_P_EBL:          Extended bootloader pahse
 * @IPC_P_RUN:          The phase after flashing to RAM is the RUNTIME phase.
 */
enum ipc_phase {
        IPC_P_OFF,
        IPC_P_OFF_REQ,
        IPC_P_CRASH,
        IPC_P_CD_READY,
        IPC_P_ROM,
        IPC_P_PSI,
        IPC_P_EBL,
        IPC_P_RUN,
};

/**
 * struct iosm_imem - Current state of the IPC shared memory.
 * @mmio:                       mmio instance to access CP MMIO area /
 *                              doorbell scratchpad.
 * @ipc_protocol:               IPC Protocol instance
 * @ipc_task:                   Task for entry into ipc task queue
 * @wwan:                       WWAN device pointer
 * @mux:                        IP Data multiplexing state.
 * @sio:                        IPC SIO data structure pointer
 * @ipc_port:                   IPC PORT data structure pointer
 * @pcie:                       IPC PCIe
 * @trace:                      IPC trace data structure pointer
 * @dev:                        Pointer to device structure
 * @ipc_requested_state:        Expected IPC state on CP.
 * @channels:                   Channel list with UL/DL pipe pairs.
 * @ipc_devlink:                IPC Devlink data structure pointer
 * @ipc_status:                 local ipc_status
 * @nr_of_channels:             number of configured channels
 * @startup_timer:              startup timer for NAND support.
 * @hrtimer_period:             Hr timer period
 * @tdupdate_timer:             Delay the TD update doorbell.
 * @fast_update_timer:          forced head pointer update delay timer.
 * @td_alloc_timer:             Timer for DL pipe TD allocation retry
 * @adb_timer:                  Timer for finishing the ADB.
 * @rom_exit_code:              Mapped boot rom exit code.
 * @enter_runtime:              1 means the transition to runtime phase was
 *                              executed.
 * @ul_pend_sem:                Semaphore to wait/complete of UL TDs
 *                              before closing pipe.
 * @app_notify_ul_pend:         Signal app if UL TD is pending
 * @dl_pend_sem:                Semaphore to wait/complete of DL TDs
 *                              before closing pipe.
 * @app_notify_dl_pend:         Signal app if DL TD is pending
 * @phase:                      Operating phase like runtime.
 * @pci_device_id:              Device ID
 * @cp_version:                 CP version
 * @device_sleep:               Device sleep state
 * @run_state_worker:           Pointer to worker component for device
 *                              setup operations to be called when modem
 *                              reaches RUN state
 * @ev_irq_pending:             0 means inform the IPC tasklet to
 *                              process the irq actions.
 * @flag:                       Flag to monitor the state of driver
 * @td_update_timer_suspended:  if true then td update timer suspend
 * @ev_mux_net_transmit_pending:0 means inform the IPC tasklet to pass
 * @reset_det_n:                Reset detect flag
 * @pcie_wake_n:                Pcie wake flag
 * @debugfs_wwan_dir:           WWAN Debug FS directory entry
 * @debugfs_dir:                Debug FS directory for driver-specific entries
 */
struct iosm_imem {
        struct iosm_mmio *mmio;
        struct iosm_protocol *ipc_protocol;
        struct ipc_task *ipc_task;
        struct iosm_wwan *wwan;
        struct iosm_mux *mux;
        struct iosm_cdev *ipc_port[IPC_MEM_MAX_CHANNELS];
        struct iosm_pcie *pcie;
#ifdef CONFIG_WWAN_DEBUGFS
        struct iosm_trace *trace;
#endif
        struct device *dev;
        enum ipc_mem_device_ipc_state ipc_requested_state;
        struct ipc_mem_channel channels[IPC_MEM_MAX_CHANNELS];
        struct iosm_devlink *ipc_devlink;
        u32 ipc_status;
        u32 nr_of_channels;
        struct hrtimer startup_timer;
        ktime_t hrtimer_period;
        struct hrtimer tdupdate_timer;
        struct hrtimer fast_update_timer;
        struct hrtimer td_alloc_timer;
        struct hrtimer adb_timer;
        enum rom_exit_code rom_exit_code;
        u32 enter_runtime;
        struct completion ul_pend_sem;
        u32 app_notify_ul_pend;
        struct completion dl_pend_sem;
        u32 app_notify_dl_pend;
        enum ipc_phase phase;
        u16 pci_device_id;
        int cp_version;
        int device_sleep;
        struct work_struct run_state_worker;
        u8 ev_irq_pending[IPC_IRQ_VECTORS];
        unsigned long flag;
        u8 td_update_timer_suspended:1,
           ev_mux_net_transmit_pending:1,
           reset_det_n:1,
           pcie_wake_n:1;
#ifdef CONFIG_WWAN_DEBUGFS
        struct dentry *debugfs_wwan_dir;
        struct dentry *debugfs_dir;
#endif
};

/**
 * ipc_imem_init - Initialize the shared memory region
 * @pcie:       Pointer to core driver data-struct
 * @device_id:  PCI device ID
 * @mmio:       Pointer to the mmio area
 * @dev:        Pointer to device structure
 *
 * Returns:  Initialized imem pointer on success else NULL
 */
struct iosm_imem *ipc_imem_init(struct iosm_pcie *pcie, unsigned int device_id,
                                void __iomem *mmio, struct device *dev);

/**
 * ipc_imem_pm_s2idle_sleep - Set PM variables to sleep/active for
 *                            s2idle sleep/active
 * @ipc_imem:   Pointer to imem data-struct
 * @sleep:      Set PM Variable to sleep/active
 */
void ipc_imem_pm_s2idle_sleep(struct iosm_imem *ipc_imem, bool sleep);

/**
 * ipc_imem_pm_suspend - The HAL shall ask the shared memory layer
 *                       whether D3 is allowed.
 * @ipc_imem:   Pointer to imem data-struct
 */
void ipc_imem_pm_suspend(struct iosm_imem *ipc_imem);

/**
 * ipc_imem_pm_resume - The HAL shall inform the shared memory layer
 *                      that the device is active.
 * @ipc_imem:   Pointer to imem data-struct
 */
void ipc_imem_pm_resume(struct iosm_imem *ipc_imem);

/**
 * ipc_imem_cleanup -   Inform CP and free the shared memory resources.
 * @ipc_imem:   Pointer to imem data-struct
 */
void ipc_imem_cleanup(struct iosm_imem *ipc_imem);

/**
 * ipc_imem_irq_process - Shift the IRQ actions to the IPC thread.
 * @ipc_imem:   Pointer to imem data-struct
 * @irq:        Irq number
 */
void ipc_imem_irq_process(struct iosm_imem *ipc_imem, int irq);

/**
 * imem_get_device_sleep_state - Get the device sleep state value.
 * @ipc_imem:   Pointer to imem instance
 *
 * Returns: device sleep state
 */
int imem_get_device_sleep_state(struct iosm_imem *ipc_imem);

/**
 * ipc_imem_td_update_timer_suspend - Updates the TD Update Timer suspend flag.
 * @ipc_imem:   Pointer to imem data-struct
 * @suspend:    Flag to update. If TRUE then HP update doorbell is triggered to
 *              device without any wait. If FALSE then HP update doorbell is
 *              delayed until timeout.
 */
void ipc_imem_td_update_timer_suspend(struct iosm_imem *ipc_imem, bool suspend);

/**
 * ipc_imem_channel_close - Release the channel resources.
 * @ipc_imem:           Pointer to imem data-struct
 * @channel_id:         Channel ID to be cleaned up.
 */
void ipc_imem_channel_close(struct iosm_imem *ipc_imem, int channel_id);

/**
 * ipc_imem_channel_alloc - Reserves a channel
 * @ipc_imem:   Pointer to imem data-struct
 * @index:      ID to lookup from the preallocated list.
 * @ctype:      Channel type.
 *
 * Returns: Index on success and failure value on error
 */
int ipc_imem_channel_alloc(struct iosm_imem *ipc_imem, int index,
                           enum ipc_ctype ctype);

/**
 * ipc_imem_channel_open - Establish the pipes.
 * @ipc_imem:           Pointer to imem data-struct
 * @channel_id:         Channel ID returned during alloc.
 * @db_id:              Doorbell ID for trigger identifier.
 *
 * Returns: Pointer of ipc_mem_channel on success and NULL on failure.
 */
struct ipc_mem_channel *ipc_imem_channel_open(struct iosm_imem *ipc_imem,
                                              int channel_id, u32 db_id);

/**
 * ipc_imem_td_update_timer_start - Starts the TD Update Timer if not running.
 * @ipc_imem:   Pointer to imem data-struct
 */
void ipc_imem_td_update_timer_start(struct iosm_imem *ipc_imem);

/**
 * ipc_imem_ul_write_td - Pass the channel UL list to protocol layer for TD
 *                    preparation and sending them to the device.
 * @ipc_imem:   Pointer to imem data-struct
 *
 * Returns: TRUE of HP Doorbell trigger is pending. FALSE otherwise.
 */
bool ipc_imem_ul_write_td(struct iosm_imem *ipc_imem);

/**
 * ipc_imem_ul_send - Dequeue SKB from channel list and start with
 *                the uplink transfer.If HP Doorbell is pending to be
 *                triggered then starts the TD Update Timer.
 * @ipc_imem:   Pointer to imem data-struct
 */
void ipc_imem_ul_send(struct iosm_imem *ipc_imem);

/**
 * ipc_imem_channel_update - Set or modify pipe config of an existing channel
 * @ipc_imem:           Pointer to imem data-struct
 * @id:                 Channel config index
 * @chnl_cfg:           Channel config struct
 * @irq_moderation:     Timer in usec for irq_moderation
 */
void ipc_imem_channel_update(struct iosm_imem *ipc_imem, int id,
                             struct ipc_chnl_cfg chnl_cfg, u32 irq_moderation);

/**
 * ipc_imem_channel_free -Free an IPC channel.
 * @channel:    Channel to be freed
 */
void ipc_imem_channel_free(struct ipc_mem_channel *channel);

/**
 * ipc_imem_hrtimer_stop - Stop the hrtimer
 * @hr_timer:   Pointer to hrtimer instance
 */
void ipc_imem_hrtimer_stop(struct hrtimer *hr_timer);

/**
 * ipc_imem_pipe_cleanup - Reset volatile pipe content for all channels
 * @ipc_imem:   Pointer to imem data-struct
 * @pipe:       Pipe to cleaned up
 */
void ipc_imem_pipe_cleanup(struct iosm_imem *ipc_imem, struct ipc_pipe *pipe);

/**
 * ipc_imem_pipe_close - Send msg to device to close pipe
 * @ipc_imem:   Pointer to imem data-struct
 * @pipe:       Pipe to be closed
 */
void ipc_imem_pipe_close(struct iosm_imem *ipc_imem, struct ipc_pipe *pipe);

/**
 * ipc_imem_phase_update - Get the CP execution state
 *                        and map it to the AP phase.
 * @ipc_imem:   Pointer to imem data-struct
 *
 * Returns: Current ap updated phase
 */
enum ipc_phase ipc_imem_phase_update(struct iosm_imem *ipc_imem);

/**
 * ipc_imem_phase_get_string - Return the current operation
 *                           phase as string.
 * @phase:      AP phase
 *
 * Returns: AP phase string
 */
const char *ipc_imem_phase_get_string(enum ipc_phase phase);

/**
 * ipc_imem_msg_send_feature_set - Send feature set message to modem
 * @ipc_imem:           Pointer to imem data-struct
 * @reset_enable:       0 = out-of-band, 1 = in-band-crash notification
 * @atomic_ctx:         if disabled call in tasklet context
 *
 */
void ipc_imem_msg_send_feature_set(struct iosm_imem *ipc_imem,
                                   unsigned int reset_enable, bool atomic_ctx);

/**
 * ipc_imem_ipc_init_check - Send the init event to CP, wait a certain time and
 *                           set CP to runtime with the context information
 * @ipc_imem:   Pointer to imem data-struct
 */
void ipc_imem_ipc_init_check(struct iosm_imem *ipc_imem);

/**
 * ipc_imem_channel_init - Initialize the channel list with UL/DL pipe pairs.
 * @ipc_imem:           Pointer to imem data-struct
 * @ctype:              Channel type
 * @chnl_cfg:           Channel configuration struct
 * @irq_moderation:     Timer in usec for irq_moderation
 */
void ipc_imem_channel_init(struct iosm_imem *ipc_imem, enum ipc_ctype ctype,
                           struct ipc_chnl_cfg chnl_cfg, u32 irq_moderation);

/**
 * ipc_imem_devlink_trigger_chip_info - Inform devlink that the chip
 *                                      information are available if the
 *                                      flashing to RAM interworking shall be
 *                                      executed.
 * @ipc_imem:   Pointer to imem structure
 *
 * Returns: 0 on success, -1 on failure
 */
int ipc_imem_devlink_trigger_chip_info(struct iosm_imem *ipc_imem);

void ipc_imem_adb_timer_start(struct iosm_imem *ipc_imem);

#endif