linux/drivers/scsi/aacraid/comminit.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 *      Adaptec AAC series RAID controller driver
   4 *      (c) Copyright 2001 Red Hat Inc.
   5 *
   6 * based on the old aacraid driver that is..
   7 * Adaptec aacraid device driver for Linux.
   8 *
   9 * Copyright (c) 2000-2010 Adaptec, Inc.
  10 *               2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
  11 *               2016-2017 Microsemi Corp. (aacraid@microsemi.com)
  12 *
  13 * Module Name:
  14 *  comminit.c
  15 *
  16 * Abstract: This supports the initialization of the host adapter commuication interface.
  17 *    This is a platform dependent module for the pci cyclone board.
  18 */
  19
  20#include <linux/kernel.h>
  21#include <linux/init.h>
  22#include <linux/types.h>
  23#include <linux/pci.h>
  24#include <linux/spinlock.h>
  25#include <linux/slab.h>
  26#include <linux/blkdev.h>
  27#include <linux/delay.h>
  28#include <linux/completion.h>
  29#include <linux/mm.h>
  30#include <scsi/scsi_host.h>
  31#include <scsi/scsi_device.h>
  32#include <scsi/scsi_cmnd.h>
  33
  34#include "aacraid.h"
  35
  36struct aac_common aac_config = {
  37        .irq_mod = 1
  38};
  39
  40static inline int aac_is_msix_mode(struct aac_dev *dev)
  41{
  42        u32 status = 0;
  43
  44        if (aac_is_src(dev))
  45                status = src_readl(dev, MUnit.OMR);
  46        return (status & AAC_INT_MODE_MSIX);
  47}
  48
  49static inline void aac_change_to_intx(struct aac_dev *dev)
  50{
  51        aac_src_access_devreg(dev, AAC_DISABLE_MSIX);
  52        aac_src_access_devreg(dev, AAC_ENABLE_INTX);
  53}
  54
  55static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long commsize, unsigned long commalign)
  56{
  57        unsigned char *base;
  58        unsigned long size, align;
  59        const unsigned long fibsize = dev->max_fib_size;
  60        const unsigned long printfbufsiz = 256;
  61        unsigned long host_rrq_size, aac_init_size;
  62        union aac_init *init;
  63        dma_addr_t phys;
  64        unsigned long aac_max_hostphysmempages;
  65
  66        if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) ||
  67                (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) ||
  68                (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3 &&
  69                !dev->sa_firmware)) {
  70                host_rrq_size =
  71                        (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB)
  72                                * sizeof(u32);
  73                aac_init_size = sizeof(union aac_init);
  74        } else if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3 &&
  75                dev->sa_firmware) {
  76                host_rrq_size = (dev->scsi_host_ptr->can_queue
  77                        + AAC_NUM_MGT_FIB) * sizeof(u32)  * AAC_MAX_MSIX;
  78                aac_init_size = sizeof(union aac_init) +
  79                        (AAC_MAX_HRRQ - 1) * sizeof(struct _rrq);
  80        } else {
  81                host_rrq_size = 0;
  82                aac_init_size = sizeof(union aac_init);
  83        }
  84        size = fibsize + aac_init_size + commsize + commalign +
  85                        printfbufsiz + host_rrq_size;
  86
  87        base = dma_alloc_coherent(&dev->pdev->dev, size, &phys, GFP_KERNEL);
  88        if (base == NULL) {
  89                printk(KERN_ERR "aacraid: unable to create mapping.\n");
  90                return 0;
  91        }
  92
  93        dev->comm_addr = (void *)base;
  94        dev->comm_phys = phys;
  95        dev->comm_size = size;
  96
  97        if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) ||
  98            (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) ||
  99            (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3)) {
 100                dev->host_rrq = (u32 *)(base + fibsize);
 101                dev->host_rrq_pa = phys + fibsize;
 102                memset(dev->host_rrq, 0, host_rrq_size);
 103        }
 104
 105        dev->init = (union aac_init *)(base + fibsize + host_rrq_size);
 106        dev->init_pa = phys + fibsize + host_rrq_size;
 107
 108        init = dev->init;
 109
 110        if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3) {
 111                int i;
 112                u64 addr;
 113
 114                init->r8.init_struct_revision =
 115                        cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_8);
 116                init->r8.init_flags = cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED |
 117                                        INITFLAGS_DRIVER_USES_UTC_TIME |
 118                                        INITFLAGS_DRIVER_SUPPORTS_PM);
 119                init->r8.init_flags |=
 120                                cpu_to_le32(INITFLAGS_DRIVER_SUPPORTS_HBA_MODE);
 121                init->r8.rr_queue_count = cpu_to_le32(dev->max_msix);
 122                init->r8.max_io_size =
 123                        cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9);
 124                init->r8.max_num_aif = init->r8.reserved1 =
 125                        init->r8.reserved2 = 0;
 126
 127                for (i = 0; i < dev->max_msix; i++) {
 128                        addr = (u64)dev->host_rrq_pa + dev->vector_cap * i *
 129                                        sizeof(u32);
 130                        init->r8.rrq[i].host_addr_high = cpu_to_le32(
 131                                                upper_32_bits(addr));
 132                        init->r8.rrq[i].host_addr_low = cpu_to_le32(
 133                                                lower_32_bits(addr));
 134                        init->r8.rrq[i].msix_id = i;
 135                        init->r8.rrq[i].element_count = cpu_to_le16(
 136                                        (u16)dev->vector_cap);
 137                        init->r8.rrq[i].comp_thresh =
 138                                        init->r8.rrq[i].unused = 0;
 139                }
 140
 141                pr_warn("aacraid: Comm Interface type3 enabled\n");
 142        } else {
 143                init->r7.init_struct_revision =
 144                        cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION);
 145                if (dev->max_fib_size != sizeof(struct hw_fib))
 146                        init->r7.init_struct_revision =
 147                                cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4);
 148                init->r7.no_of_msix_vectors = cpu_to_le32(SA_MINIPORT_REVISION);
 149                init->r7.fsrev = cpu_to_le32(dev->fsrev);
 150
 151                /*
 152                 *      Adapter Fibs are the first thing allocated so that they
 153                 *      start page aligned
 154                 */
 155                dev->aif_base_va = (struct hw_fib *)base;
 156
 157                init->r7.adapter_fibs_virtual_address = 0;
 158                init->r7.adapter_fibs_physical_address = cpu_to_le32((u32)phys);
 159                init->r7.adapter_fibs_size = cpu_to_le32(fibsize);
 160                init->r7.adapter_fib_align = cpu_to_le32(sizeof(struct hw_fib));
 161
 162                /*
 163                 * number of 4k pages of host physical memory. The aacraid fw
 164                 * needs this number to be less than 4gb worth of pages. New
 165                 * firmware doesn't have any issues with the mapping system, but
 166                 * older Firmware did, and had *troubles* dealing with the math
 167                 * overloading past 32 bits, thus we must limit this field.
 168                 */
 169                aac_max_hostphysmempages =
 170                                dma_get_required_mask(&dev->pdev->dev) >> 12;
 171                if (aac_max_hostphysmempages < AAC_MAX_HOSTPHYSMEMPAGES)
 172                        init->r7.host_phys_mem_pages =
 173                                        cpu_to_le32(aac_max_hostphysmempages);
 174                else
 175                        init->r7.host_phys_mem_pages =
 176                                        cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES);
 177
 178                init->r7.init_flags =
 179                        cpu_to_le32(INITFLAGS_DRIVER_USES_UTC_TIME |
 180                        INITFLAGS_DRIVER_SUPPORTS_PM);
 181                init->r7.max_io_commands =
 182                        cpu_to_le32(dev->scsi_host_ptr->can_queue +
 183                                        AAC_NUM_MGT_FIB);
 184                init->r7.max_io_size =
 185                        cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9);
 186                init->r7.max_fib_size = cpu_to_le32(dev->max_fib_size);
 187                init->r7.max_num_aif = cpu_to_le32(dev->max_num_aif);
 188
 189                if (dev->comm_interface == AAC_COMM_MESSAGE) {
 190                        init->r7.init_flags |=
 191                                cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED);
 192                        pr_warn("aacraid: Comm Interface enabled\n");
 193                } else if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) {
 194                        init->r7.init_struct_revision =
 195                                cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_6);
 196                        init->r7.init_flags |=
 197                                cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED |
 198                                INITFLAGS_NEW_COMM_TYPE1_SUPPORTED |
 199                                INITFLAGS_FAST_JBOD_SUPPORTED);
 200                        init->r7.host_rrq_addr_high =
 201                                cpu_to_le32(upper_32_bits(dev->host_rrq_pa));
 202                        init->r7.host_rrq_addr_low =
 203                                cpu_to_le32(lower_32_bits(dev->host_rrq_pa));
 204                        pr_warn("aacraid: Comm Interface type1 enabled\n");
 205                } else if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) {
 206                        init->r7.init_struct_revision =
 207                                cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_7);
 208                        init->r7.init_flags |=
 209                                cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED |
 210                                INITFLAGS_NEW_COMM_TYPE2_SUPPORTED |
 211                                INITFLAGS_FAST_JBOD_SUPPORTED);
 212                        init->r7.host_rrq_addr_high =
 213                                cpu_to_le32(upper_32_bits(dev->host_rrq_pa));
 214                        init->r7.host_rrq_addr_low =
 215                                cpu_to_le32(lower_32_bits(dev->host_rrq_pa));
 216                        init->r7.no_of_msix_vectors =
 217                                cpu_to_le32(dev->max_msix);
 218                        /* must be the COMM_PREFERRED_SETTINGS values */
 219                        pr_warn("aacraid: Comm Interface type2 enabled\n");
 220                }
 221        }
 222
 223        /*
 224         * Increment the base address by the amount already used
 225         */
 226        base = base + fibsize + host_rrq_size + aac_init_size;
 227        phys = (dma_addr_t)((ulong)phys + fibsize + host_rrq_size +
 228                        aac_init_size);
 229
 230        /*
 231         *      Align the beginning of Headers to commalign
 232         */
 233        align = (commalign - ((uintptr_t)(base) & (commalign - 1)));
 234        base = base + align;
 235        phys = phys + align;
 236        /*
 237         *      Fill in addresses of the Comm Area Headers and Queues
 238         */
 239        *commaddr = base;
 240        if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE3)
 241                init->r7.comm_header_address = cpu_to_le32((u32)phys);
 242        /*
 243         *      Increment the base address by the size of the CommArea
 244         */
 245        base = base + commsize;
 246        phys = phys + commsize;
 247        /*
 248         *       Place the Printf buffer area after the Fast I/O comm area.
 249         */
 250        dev->printfbuf = (void *)base;
 251        if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE3) {
 252                init->r7.printfbuf = cpu_to_le32(phys);
 253                init->r7.printfbufsiz = cpu_to_le32(printfbufsiz);
 254        }
 255        memset(base, 0, printfbufsiz);
 256        return 1;
 257}
 258
 259static void aac_queue_init(struct aac_dev * dev, struct aac_queue * q, u32 *mem, int qsize)
 260{
 261        atomic_set(&q->numpending, 0);
 262        q->dev = dev;
 263        init_waitqueue_head(&q->cmdready);
 264        INIT_LIST_HEAD(&q->cmdq);
 265        init_waitqueue_head(&q->qfull);
 266        spin_lock_init(&q->lockdata);
 267        q->lock = &q->lockdata;
 268        q->headers.producer = (__le32 *)mem;
 269        q->headers.consumer = (__le32 *)(mem+1);
 270        *(q->headers.producer) = cpu_to_le32(qsize);
 271        *(q->headers.consumer) = cpu_to_le32(qsize);
 272        q->entries = qsize;
 273}
 274
 275static bool wait_for_io_iter(struct scsi_cmnd *cmd, void *data, bool rsvd)
 276{
 277        int *active = data;
 278
 279        if (aac_priv(cmd)->owner == AAC_OWNER_FIRMWARE)
 280                *active = *active + 1;
 281        return true;
 282}
 283static void aac_wait_for_io_completion(struct aac_dev *aac)
 284{
 285        int i = 0, active;
 286
 287        for (i = 60; i; --i) {
 288
 289                active = 0;
 290                scsi_host_busy_iter(aac->scsi_host_ptr,
 291                                    wait_for_io_iter, &active);
 292                /*
 293                 * We can exit If all the commands are complete
 294                 */
 295                if (active == 0)
 296                        break;
 297                dev_info(&aac->pdev->dev,
 298                         "Wait for %d commands to complete\n", active);
 299                ssleep(1);
 300        }
 301        if (active)
 302                dev_err(&aac->pdev->dev,
 303                        "%d outstanding commands during shutdown\n", active);
 304}
 305
 306/**
 307 *      aac_send_shutdown               -       shutdown an adapter
 308 *      @dev: Adapter to shutdown
 309 *
 310 *      This routine will send a VM_CloseAll (shutdown) request to the adapter.
 311 */
 312
 313int aac_send_shutdown(struct aac_dev * dev)
 314{
 315        struct fib * fibctx;
 316        struct aac_close *cmd;
 317        int status = 0;
 318
 319        if (aac_adapter_check_health(dev))
 320                return status;
 321
 322        if (!dev->adapter_shutdown) {
 323                mutex_lock(&dev->ioctl_mutex);
 324                dev->adapter_shutdown = 1;
 325                mutex_unlock(&dev->ioctl_mutex);
 326        }
 327
 328        aac_wait_for_io_completion(dev);
 329
 330        fibctx = aac_fib_alloc(dev);
 331        if (!fibctx)
 332                return -ENOMEM;
 333        aac_fib_init(fibctx);
 334
 335        cmd = (struct aac_close *) fib_data(fibctx);
 336        cmd->command = cpu_to_le32(VM_CloseAll);
 337        cmd->cid = cpu_to_le32(0xfffffffe);
 338
 339        status = aac_fib_send(ContainerCommand,
 340                          fibctx,
 341                          sizeof(struct aac_close),
 342                          FsaNormal,
 343                          -2 /* Timeout silently */, 1,
 344                          NULL, NULL);
 345
 346        if (status >= 0)
 347                aac_fib_complete(fibctx);
 348        /* FIB should be freed only after getting the response from the F/W */
 349        if (status != -ERESTARTSYS)
 350                aac_fib_free(fibctx);
 351        if (aac_is_src(dev) &&
 352             dev->msi_enabled)
 353                aac_set_intx_mode(dev);
 354        return status;
 355}
 356
 357/**
 358 *      aac_comm_init   -       Initialise FSA data structures
 359 *      @dev:   Adapter to initialise
 360 *
 361 *      Initializes the data structures that are required for the FSA commuication
 362 *      interface to operate. 
 363 *      Returns
 364 *              1 - if we were able to init the commuication interface.
 365 *              0 - If there were errors initing. This is a fatal error.
 366 */
 367 
 368static int aac_comm_init(struct aac_dev * dev)
 369{
 370        unsigned long hdrsize = (sizeof(u32) * NUMBER_OF_COMM_QUEUES) * 2;
 371        unsigned long queuesize = sizeof(struct aac_entry) * TOTAL_QUEUE_ENTRIES;
 372        u32 *headers;
 373        struct aac_entry * queues;
 374        unsigned long size;
 375        struct aac_queue_block * comm = dev->queues;
 376        /*
 377         *      Now allocate and initialize the zone structures used as our 
 378         *      pool of FIB context records.  The size of the zone is based
 379         *      on the system memory size.  We also initialize the mutex used
 380         *      to protect the zone.
 381         */
 382        spin_lock_init(&dev->fib_lock);
 383
 384        /*
 385         *      Allocate the physically contiguous space for the commuication
 386         *      queue headers. 
 387         */
 388
 389        size = hdrsize + queuesize;
 390
 391        if (!aac_alloc_comm(dev, (void * *)&headers, size, QUEUE_ALIGNMENT))
 392                return -ENOMEM;
 393
 394        queues = (struct aac_entry *)(((ulong)headers) + hdrsize);
 395
 396        /* Adapter to Host normal priority Command queue */ 
 397        comm->queue[HostNormCmdQueue].base = queues;
 398        aac_queue_init(dev, &comm->queue[HostNormCmdQueue], headers, HOST_NORM_CMD_ENTRIES);
 399        queues += HOST_NORM_CMD_ENTRIES;
 400        headers += 2;
 401
 402        /* Adapter to Host high priority command queue */
 403        comm->queue[HostHighCmdQueue].base = queues;
 404        aac_queue_init(dev, &comm->queue[HostHighCmdQueue], headers, HOST_HIGH_CMD_ENTRIES);
 405    
 406        queues += HOST_HIGH_CMD_ENTRIES;
 407        headers +=2;
 408
 409        /* Host to adapter normal priority command queue */
 410        comm->queue[AdapNormCmdQueue].base = queues;
 411        aac_queue_init(dev, &comm->queue[AdapNormCmdQueue], headers, ADAP_NORM_CMD_ENTRIES);
 412    
 413        queues += ADAP_NORM_CMD_ENTRIES;
 414        headers += 2;
 415
 416        /* host to adapter high priority command queue */
 417        comm->queue[AdapHighCmdQueue].base = queues;
 418        aac_queue_init(dev, &comm->queue[AdapHighCmdQueue], headers, ADAP_HIGH_CMD_ENTRIES);
 419    
 420        queues += ADAP_HIGH_CMD_ENTRIES;
 421        headers += 2;
 422
 423        /* adapter to host normal priority response queue */
 424        comm->queue[HostNormRespQueue].base = queues;
 425        aac_queue_init(dev, &comm->queue[HostNormRespQueue], headers, HOST_NORM_RESP_ENTRIES);
 426        queues += HOST_NORM_RESP_ENTRIES;
 427        headers += 2;
 428
 429        /* adapter to host high priority response queue */
 430        comm->queue[HostHighRespQueue].base = queues;
 431        aac_queue_init(dev, &comm->queue[HostHighRespQueue], headers, HOST_HIGH_RESP_ENTRIES);
 432   
 433        queues += HOST_HIGH_RESP_ENTRIES;
 434        headers += 2;
 435
 436        /* host to adapter normal priority response queue */
 437        comm->queue[AdapNormRespQueue].base = queues;
 438        aac_queue_init(dev, &comm->queue[AdapNormRespQueue], headers, ADAP_NORM_RESP_ENTRIES);
 439
 440        queues += ADAP_NORM_RESP_ENTRIES;
 441        headers += 2;
 442        
 443        /* host to adapter high priority response queue */ 
 444        comm->queue[AdapHighRespQueue].base = queues;
 445        aac_queue_init(dev, &comm->queue[AdapHighRespQueue], headers, ADAP_HIGH_RESP_ENTRIES);
 446
 447        comm->queue[AdapNormCmdQueue].lock = comm->queue[HostNormRespQueue].lock;
 448        comm->queue[AdapHighCmdQueue].lock = comm->queue[HostHighRespQueue].lock;
 449        comm->queue[AdapNormRespQueue].lock = comm->queue[HostNormCmdQueue].lock;
 450        comm->queue[AdapHighRespQueue].lock = comm->queue[HostHighCmdQueue].lock;
 451
 452        return 0;
 453}
 454
 455void aac_define_int_mode(struct aac_dev *dev)
 456{
 457        int i, msi_count, min_msix;
 458
 459        msi_count = i = 0;
 460        /* max. vectors from GET_COMM_PREFERRED_SETTINGS */
 461        if (dev->max_msix == 0 ||
 462            dev->pdev->device == PMC_DEVICE_S6 ||
 463            dev->sync_mode) {
 464                dev->max_msix = 1;
 465                dev->vector_cap =
 466                        dev->scsi_host_ptr->can_queue +
 467                        AAC_NUM_MGT_FIB;
 468                return;
 469        }
 470
 471        /* Don't bother allocating more MSI-X vectors than cpus */
 472        msi_count = min(dev->max_msix,
 473                (unsigned int)num_online_cpus());
 474
 475        dev->max_msix = msi_count;
 476
 477        if (msi_count > AAC_MAX_MSIX)
 478                msi_count = AAC_MAX_MSIX;
 479
 480        if (msi_count > 1 &&
 481            pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
 482                min_msix = 2;
 483                i = pci_alloc_irq_vectors(dev->pdev,
 484                                          min_msix, msi_count,
 485                                          PCI_IRQ_MSIX | PCI_IRQ_AFFINITY);
 486                if (i > 0) {
 487                        dev->msi_enabled = 1;
 488                        msi_count = i;
 489                } else {
 490                        dev->msi_enabled = 0;
 491                        dev_err(&dev->pdev->dev,
 492                        "MSIX not supported!! Will try INTX 0x%x.\n", i);
 493                }
 494        }
 495
 496        if (!dev->msi_enabled)
 497                dev->max_msix = msi_count = 1;
 498        else {
 499                if (dev->max_msix > msi_count)
 500                        dev->max_msix = msi_count;
 501        }
 502        if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3 && dev->sa_firmware)
 503                dev->vector_cap = dev->scsi_host_ptr->can_queue +
 504                                AAC_NUM_MGT_FIB;
 505        else
 506                dev->vector_cap = (dev->scsi_host_ptr->can_queue +
 507                                AAC_NUM_MGT_FIB) / msi_count;
 508
 509}
 510struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 511{
 512        u32 status[5];
 513        struct Scsi_Host * host = dev->scsi_host_ptr;
 514        extern int aac_sync_mode;
 515
 516        /*
 517         *      Check the preferred comm settings, defaults from template.
 518         */
 519        dev->management_fib_count = 0;
 520        spin_lock_init(&dev->manage_lock);
 521        spin_lock_init(&dev->sync_lock);
 522        spin_lock_init(&dev->iq_lock);
 523        dev->max_fib_size = sizeof(struct hw_fib);
 524        dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size
 525                - sizeof(struct aac_fibhdr)
 526                - sizeof(struct aac_write) + sizeof(struct sgentry))
 527                        / sizeof(struct sgentry);
 528        dev->comm_interface = AAC_COMM_PRODUCER;
 529        dev->raw_io_interface = dev->raw_io_64 = 0;
 530
 531
 532        /*
 533         * Enable INTX mode, if not done already Enabled
 534         */
 535        if (aac_is_msix_mode(dev)) {
 536                aac_change_to_intx(dev);
 537                dev_info(&dev->pdev->dev, "Changed firmware to INTX mode");
 538        }
 539
 540        if ((!aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES,
 541                0, 0, 0, 0, 0, 0,
 542                status+0, status+1, status+2, status+3, status+4)) &&
 543                (status[0] == 0x00000001)) {
 544                dev->doorbell_mask = status[3];
 545                if (status[1] & AAC_OPT_NEW_COMM_64)
 546                        dev->raw_io_64 = 1;
 547                dev->sync_mode = aac_sync_mode;
 548                if (dev->a_ops.adapter_comm &&
 549                    (status[1] & AAC_OPT_NEW_COMM)) {
 550                        dev->comm_interface = AAC_COMM_MESSAGE;
 551                        dev->raw_io_interface = 1;
 552                        if ((status[1] & AAC_OPT_NEW_COMM_TYPE1)) {
 553                                /* driver supports TYPE1 (Tupelo) */
 554                                dev->comm_interface = AAC_COMM_MESSAGE_TYPE1;
 555                        } else if (status[1] & AAC_OPT_NEW_COMM_TYPE2) {
 556                                /* driver supports TYPE2 (Denali, Yosemite) */
 557                                dev->comm_interface = AAC_COMM_MESSAGE_TYPE2;
 558                        } else if (status[1] & AAC_OPT_NEW_COMM_TYPE3) {
 559                                /* driver supports TYPE3 (Yosemite, Thor) */
 560                                dev->comm_interface = AAC_COMM_MESSAGE_TYPE3;
 561                        } else if (status[1] & AAC_OPT_NEW_COMM_TYPE4) {
 562                                /* not supported TYPE - switch to sync. mode */
 563                                dev->comm_interface = AAC_COMM_MESSAGE_TYPE2;
 564                                dev->sync_mode = 1;
 565                        }
 566                }
 567                if ((status[1] & le32_to_cpu(AAC_OPT_EXTENDED)) &&
 568                        (status[4] & le32_to_cpu(AAC_EXTOPT_SA_FIRMWARE)))
 569                        dev->sa_firmware = 1;
 570                else
 571                        dev->sa_firmware = 0;
 572
 573                if (status[4] & le32_to_cpu(AAC_EXTOPT_SOFT_RESET))
 574                        dev->soft_reset_support = 1;
 575                else
 576                        dev->soft_reset_support = 0;
 577
 578                if ((dev->comm_interface == AAC_COMM_MESSAGE) &&
 579                    (status[2] > dev->base_size)) {
 580                        aac_adapter_ioremap(dev, 0);
 581                        dev->base_size = status[2];
 582                        if (aac_adapter_ioremap(dev, status[2])) {
 583                                /* remap failed, go back ... */
 584                                dev->comm_interface = AAC_COMM_PRODUCER;
 585                                if (aac_adapter_ioremap(dev, AAC_MIN_FOOTPRINT_SIZE)) {
 586                                        printk(KERN_WARNING
 587                                          "aacraid: unable to map adapter.\n");
 588                                        return NULL;
 589                                }
 590                        }
 591                }
 592        }
 593        dev->max_msix = 0;
 594        dev->msi_enabled = 0;
 595        dev->adapter_shutdown = 0;
 596        if ((!aac_adapter_sync_cmd(dev, GET_COMM_PREFERRED_SETTINGS,
 597          0, 0, 0, 0, 0, 0,
 598          status+0, status+1, status+2, status+3, status+4))
 599         && (status[0] == 0x00000001)) {
 600                /*
 601                 *      status[1] >> 16         maximum command size in KB
 602                 *      status[1] & 0xFFFF      maximum FIB size
 603                 *      status[2] >> 16         maximum SG elements to driver
 604                 *      status[2] & 0xFFFF      maximum SG elements from driver
 605                 *      status[3] & 0xFFFF      maximum number FIBs outstanding
 606                 */
 607                host->max_sectors = (status[1] >> 16) << 1;
 608                /* Multiple of 32 for PMC */
 609                dev->max_fib_size = status[1] & 0xFFE0;
 610                host->sg_tablesize = status[2] >> 16;
 611                dev->sg_tablesize = status[2] & 0xFFFF;
 612                if (aac_is_src(dev)) {
 613                        if (host->can_queue > (status[3] >> 16) -
 614                                        AAC_NUM_MGT_FIB)
 615                                host->can_queue = (status[3] >> 16) -
 616                                        AAC_NUM_MGT_FIB;
 617                } else if (host->can_queue > (status[3] & 0xFFFF) -
 618                                AAC_NUM_MGT_FIB)
 619                        host->can_queue = (status[3] & 0xFFFF) -
 620                                AAC_NUM_MGT_FIB;
 621
 622                dev->max_num_aif = status[4] & 0xFFFF;
 623        }
 624        if (numacb > 0) {
 625                if (numacb < host->can_queue)
 626                        host->can_queue = numacb;
 627                else
 628                        pr_warn("numacb=%d ignored\n", numacb);
 629        }
 630
 631        if (aac_is_src(dev))
 632                aac_define_int_mode(dev);
 633        /*
 634         *      Ok now init the communication subsystem
 635         */
 636
 637        dev->queues = kzalloc(sizeof(struct aac_queue_block), GFP_KERNEL);
 638        if (dev->queues == NULL) {
 639                printk(KERN_ERR "Error could not allocate comm region.\n");
 640                return NULL;
 641        }
 642
 643        if (aac_comm_init(dev)<0){
 644                kfree(dev->queues);
 645                return NULL;
 646        }
 647        /*
 648         *      Initialize the list of fibs
 649         */
 650        if (aac_fib_setup(dev) < 0) {
 651                kfree(dev->queues);
 652                return NULL;
 653        }
 654                
 655        INIT_LIST_HEAD(&dev->fib_list);
 656        INIT_LIST_HEAD(&dev->sync_fib_list);
 657
 658        return dev;
 659}
 660
 661